Merge tag 'v3.15-rc1' into patchwork

Linux 3.15-rc1

* tag 'v3.15-rc1': (12180 commits)
  Linux 3.15-rc1
  mm: Initialize error in shmem_file_aio_read()
  cifs: Use min_t() when comparing "size_t" and "unsigned long"
  sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
  powerpc: Don't try to set LPCR unless we're in hypervisor mode
  futex: update documentation for ordering guarantees
  ceph: fix pr_fmt() redefinition
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  ...

1 files changed, 121 insertions, 0 deletions

diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
new file mode 100644
index 000000000000..f76f7a08412d
--- /dev/null
+++ b/arch/mips/kernel/mips-cm.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+
+#include <asm/mips-cm.h>
+#include <asm/mipsregs.h>
+
+void __iomem *mips_cm_base;
+void __iomem *mips_cm_l2sync_base;
+
+phys_t __mips_cm_phys_base(void)
+{
+	u32 config3 = read_c0_config3();
+	u32 cmgcr;
+
+	/* Check the CMGCRBase register is implemented */
+	if (!(config3 & MIPS_CONF3_CMGCR))
+		return 0;
+
+	/* Read the address from CMGCRBase */
+	cmgcr = read_c0_cmgcrbase();
+	return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
+}
+
+phys_t mips_cm_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_phys_base")));
+
+phys_t __mips_cm_l2sync_phys_base(void)
+{
+	u32 base_reg;
+
+	/*
+	 * If the L2-only sync region is already enabled then leave it at it's
+	 * current location.
+	 */
+	base_reg = read_gcr_l2_only_sync_base();
+	if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK)
+		return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK;
+
+	/* Default to following the CM */
+	return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
+}
+
+phys_t mips_cm_l2sync_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
+
+static void mips_cm_probe_l2sync(void)
+{
+	unsigned major_rev;
+	phys_t addr;
+
+	/* L2-only sync was introduced with CM major revision 6 */
+	major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >>
+		CM_GCR_REV_MAJOR_SHF;
+	if (major_rev < 6)
+		return;
+
+	/* Find a location for the L2 sync region */
+	addr = mips_cm_l2sync_phys_base();
+	BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK) != addr);
+	if (!addr)
+		return;
+
+	/* Set the region base address & enable it */
+	write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK);
+
+	/* Map the region */
+	mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE);
+}
+
+int mips_cm_probe(void)
+{
+	phys_t addr;
+	u32 base_reg;
+
+	addr = mips_cm_phys_base();
+	BUG_ON((addr & CM_GCR_BASE_GCRBASE_MSK) != addr);
+	if (!addr)
+		return -ENODEV;
+
+	mips_cm_base = ioremap_nocache(addr, MIPS_CM_GCR_SIZE);
+	if (!mips_cm_base)
+		return -ENXIO;
+
+	/* sanity check that we're looking at a CM */
+	base_reg = read_gcr_base();
+	if ((base_reg & CM_GCR_BASE_GCRBASE_MSK) != addr) {
+		pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
+		       (unsigned long)addr);
+		mips_cm_base = NULL;
+		return -ENODEV;
+	}
+
+	/* set default target to memory */
+	base_reg &= ~CM_GCR_BASE_CMDEFTGT_MSK;
+	base_reg |= CM_GCR_BASE_CMDEFTGT_MEM;
+	write_gcr_base(base_reg);
+
+	/* disable CM regions */
+	write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+	write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+	write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+
+	/* probe for an L2-only sync region */
+	mips_cm_probe_l2sync();
+
+	return 0;
+}