diff options
| author | Alexander Stein <alexander.stein@ew.tq-group.com> | 2022-09-15 08:28:55 +0200 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2022-10-23 17:10:40 +0800 |
| commit | ca69b6c78d5d6cd9a4417d279eda1d2cd2fb3829 (patch) | |
| tree | 28d0a98672d3907f797f0985850797c1fefed84d /arch/arm64 | |
| parent | 9abf2313adc1ca1b6180c508c25f22f9395cc780 (diff) | |
arm64: dts: tqma8mpql: add support for 2nd USB (host) interface
The on-board USB hub has a single reset line which needs to be enabled.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 7bf6f81e87b4..1c440909f580 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -461,11 +461,23 @@ status = "okay"; }; +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; + dr_mode = "host"; + status = "okay"; +}; + &usb3_phy0 { vbus-supply = <®_vcc_5v0>; status = "okay"; }; +&usb3_phy1 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + &usb_dwc3_0 { /* dual role is implemented, but not a full featured OTG */ hnp-disable; @@ -486,6 +498,31 @@ }; }; +&usb_dwc3_1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -720,6 +757,10 @@ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>; }; + pinctrl_usbhub: usbhubgrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x10>; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, |