Merge tag 'v4.20-rc6' into rdma.git for-next

For dependencies in following patches.

11 files changed, 20 insertions, 17 deletions

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index d4d33cd7adad..1e2bb68231ad 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };
 
 &mmc3 {
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index dae6e458e59f..b1c988eed87c 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index e45a15ceb94b..69d753cac89a 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index b560ff88459b..5ff9a179c83c 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -55,7 +55,7 @@
 	};
 
 	chosen {
-		stdout-path = "&uart1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@70000000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index ed9a980bce85..beefa1b2049d 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -740,7 +740,7 @@
 			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_I2C1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 53b3408b5fab..7d7d679945d2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -117,7 +117,9 @@
 		regulator-name = "enet_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	reg_pcie_gpio: regulator-pcie-gpio {
@@ -180,6 +182,7 @@
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	mdio {
@@ -373,6 +376,8 @@
 				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
 				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
 				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index ac343330d0c8..98b682a8080c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -129,7 +129,7 @@
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 9d5d53fbe9c0..c39cf2ca54da 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -35,7 +35,7 @@
  * jumpering combinations for the long run.
  */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 2075120cfc4d..d8bf939a3aff 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -10,7 +10,11 @@
 #include "rk3288.dtsi"
 
 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 843052f14f1c..dd0dda6ed44b 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index 41ec66a96990..ca6249558760 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -50,8 +50,8 @@
 	compatible = "fsl,vf610m4";
 
 	chosen {
-		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
-		stdout-path = "&uart2";
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
 	};
 
 	memory@8c000000 {