Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New device support
* adi,ad8366
  - Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
  - New driver for the integrated ADC on a number of allwinner SoCs
    including dt-binding documentation.
* microchip,mcp4728
  - New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
  - Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
  - New driver for this passive infrared sensor typically used for human
    detection. Includes bindings and a few pieces of new ABI to
    cover a case of needing to count a number of repeats of an event
    before reporting it.
* rohm,bu27008
  - Add initial support for the BU27010 RGB + flickering sensor to this
    driver. Substantial refactoring was needed to enable this.

Features
* adi,admv8818
  - Add mode that bypasses the input and output filters.
* amlogic,meson
  - Support control of the MUX on channel 7, exposed as multiple channels.
  - Support channel labels.
* sensirion,scd4x
  - Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
  - Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
  - Add proximity interrupt support for vcnl4200.
  - Add proximity integration time control for vcnl4200.
  - Add illuminance integration time control for vcnl4040 and vcnl4200.
  - Add calibration bias, proximity and illuminance event period, and
    oversampling ratio control for vcnl4040 and vncl4200.

Cleanup and minor fixes
* core
  - Tidy up handling of set_trigger_state() callback return values
    to consistently assume no positive return values.
  - Use min() rather than min_t() in a case where types were clearly
    the same.
  - Drop some else statements that follow continue with a loop or
    a returns.
  - White space and comment format cleanup.
  - Use sysfs_match_string() helper to improve readability.
  - Use krealloc_array() to make it explicit a krealloc is for an array
    of structures, not just one.
* tools
  - Tidy up potential overflow in array index.
* tree wide
  - Fix up includes for DT related headers.
  - Drop some error prints in places where as similar error message
    is printed by the function being called.
  - Tidy up handling of return value from platform_get_irq() to no longer
    take into account 0 as a value that might be returned. Similar for
    fwnode_irq_get().
* adi,ad7192
  - Add missing error check and improved debug logging.
  - Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
  - Drop unused scan element enum entries.
  - Specify that a few more devices support burst32 mode.
* adi,admv1013
  - Enable all required regulators and document as required in the
    dt-binding.
* adi,admv1014
  - Make all regulators required in the dt-binding as the device needs
    them all enabled.
* adi,adxl313
  - Fix wrong enum values being used in the i2c_device_id table.
  - Use i2c_get_match_data() to reduce open coded handling of the
    various id tables.
* allwinner,gpadc
  - Make the kconfig text more specific to make space for separate drivers
    for other Allwinner devices.
* amlogic,meson
  - Drop unused timestamp channels as no buffer support.
  - Various minor reorganizations to enable addition of support channel 7
    MUX.
  - Initialize some default values to account for potential previous user
    since reboot.
* qcom,spmi-adc5
  - Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
  - Use predefined channel ID definitions rather than values.
* invensense, common
  - Factor out the timestamp handling to a module used by both mpu6050 and
    icm42600.
* invensense,mpu6050
  - Read as many FIFO elements as possible in one bus access.
* men,s188
  - Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
  - Use i2c_get_match_data() instead of open coding. Includes making the
    data format the same for the i2c_device_id and firmware match
    tables.
* semtech,sx9310
  - dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
  - dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
  - Use devm_platform_get_and_ioremap_resource() instead of open coded
    version.
* st,stm-lptimer-trigger
  - Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
  - Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
  - Move to switch statements for channel type checking to make later
    additions simpler.

* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
  Documentation: ABI: testing: admv8818: add bypass
  drivers: iio: filter: admv8818: add bypass mode
  iio: light: bd27008: Support BD27010 RGB
  iio: light: bu27008: add chip info
  dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
  iio: add MCP4728 I2C DAC driver
  dt-bindings: iio: dac: add mcp4728.yaml
  drivers: iio: admv1013: add vcc regulators
  dt-bindings: iio: admv1013: add vcc regulators
  iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
  iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
  dt-bindings: iio: admv1014: make all regs required
  iio: cdc: ad7150: relax return value check for IRQ get
  iio: mb1232: relax return value check for IRQ get
  iio: adc: fix the return value handle for platform_get_irq()
  tools: iio: iio_generic_buffer: Fix some integer type and calculation
  iio: potentiometer: mcp4531: Use i2c_get_match_data()
  iio: potentiometer: mcp4018: Use i2c_get_match_data()
  iio: core: Fix issues and style of the comments
  iio: core: Switch to krealloc_array()
  ...

11 files changed, 356 insertions, 4 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7140e8e7313f..a2854dc9a839 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -2163,3 +2163,19 @@ Contact:	[email protected]
 Description:
 		An example format is 16-bytes, 2-digits-per-byte, HEX-string
 		representing the sensor unique ID number.
+
+What:		/sys/.../events/in_proximity_thresh_either_runningperiod
+KernelVersion:	6.6
+Contact:	[email protected]
+Description:
+		A running period of time (in seconds) for which
+		in_proximity_thresh_either_runningcount amount of conditions
+		must occur before an event is generated. If direction is not
+		specified then this period applies to both directions.
+
+What:		/sys/.../events/in_proximity_thresh_either_runningcount
+KernelVersion:	6.6
+Contact:	[email protected]
+Description:
+		Number of conditions that must occur, during a running
+		period, before an event is generated.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index f6c035752639..31dbb390573f 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -7,6 +7,8 @@ Description:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
+		- bypass -> bypass low pass filter, high pass filter and disable/unregister
+								the clock rate notifier
 
 What:		/sys/bus/iio/devices/iio:deviceX/filter_mode
 KernelVersion:
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
new file mode 100644
index 000000000000..7ef46c90ebc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+maintainers:
+  - Maksim Kiselev <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - "#io-channel-cells"
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpadc: adc@2009000 {
+        compatible = "allwinner,sun20i-d1-gpadc";
+        reg = <0x2009000 0x400>;
+        clocks = <&ccu CLK_BUS_GPADC>;
+        resets = <&ccu RST_BUS_GPADC>;
+        interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+        #io-channel-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2127d639a768..e004659099c1 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -78,9 +78,9 @@ patternProperties:
       ti,datarate:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
-        maximum: 6
+        maximum: 7
         description: |
-          Data acquisition rate in samples per second
+          Data acquisition rate in samples per second for ADS1015, TLA2024
           0: 128
           1: 250
           2: 490
@@ -88,6 +88,17 @@ patternProperties:
           4: 1600 (default)
           5: 2400
           6: 3300
+          7: 3300
+
+          Data acquisition rate in samples per second for ADS1115
+          0: 8
+          1: 16
+          2: 32
+          3: 64
+          4: 128 (default)
+          5: 250
+          6: 475
+          7: 860
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
new file mode 100644
index 000000000000..99831d7f1c16
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4728 DAC
+
+maintainers:
+  - Andrea Collamati <[email protected]>
+
+description: |
+  MCP4728 is a quad channel, 12-bit voltage output
+  Digital-to-Analog Converter with non-volatile
+  memory and I2C compatible Serial Interface.
+  https://www.microchip.com/en-us/product/mcp4728
+
+properties:
+  compatible:
+    const: microchip,mcp4728
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the MCP4728
+      when Internal Vref is not selected.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@60 {
+            compatible = "microchip,mcp4728";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
index fc813bcb6532..f2eb2287ed9e 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -39,6 +39,46 @@ properties:
     description:
       Analog voltage regulator.
 
+  vcc-drv-supply:
+    description:
+      RF Driver voltage regulator.
+
+  vcc2-drv-supply:
+    description:
+      RF predriver voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit voltage regulator.
+
+  vcc-amp1-supply:
+    description:
+      RF Amplifier 1 voltage regulator.
+
+  vcc-amp2-supply:
+    description:
+      RF Amplifier 2 voltage regulator.
+
+  vcc-env-supply:
+    description:
+      Envelope Detector voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Mixer Chip Band Gap Circuit voltage regulator.
+
+  vcc-bg2-supply:
+    description:
+      VGA Chip Band Gap Circuit voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruppler voltage regulator.
+
   adi,detector-enable:
     description:
       Enable the Envelope Detector available at output pins VENV_P and
@@ -69,6 +109,16 @@ required:
   - clocks
   - clock-names
   - vcm-supply
+  - vcc-drv-supply
+  - vcc2-drv-supply
+  - vcc-vva-supply
+  - vcc-amp1-supply
+  - vcc-amp2-supply
+  - vcc-env-supply
+  - vcc-bg-supply
+  - vcc-bg2-supply
+  - vcc-mixer-supply
+  - vcc-quad-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -87,6 +137,16 @@ examples:
         clocks = <&admv1013_lo>;
         clock-names = "lo_in";
         vcm-supply = <&vcm>;
+        vcc-drv-supply = <&vcc_drv>;
+        vcc2-drv-supply = <&vcc2_drv>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-amp1-supply = <&vcc_amp1>;
+        vcc-amp2-supply = <&vcc_amp2>;
+        vcc-env-supply = <&vcc_env>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-bg2-supply = <&vcc_bg2>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        vcc-quad-supply = <&vcc_quad>;
         adi,quad-se-mode = "diff";
         adi,detector-enable;
       };
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
index ab86daa2c56e..8e4c5ff0da14 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -103,6 +103,14 @@ required:
   - clocks
   - clock-names
   - vcm-supply
+  - vcc-if-bb-supply
+  - vcc-vga-supply
+  - vcc-vva-supply
+  - vcc-lna-3p3-supply
+  - vcc-lna-1p5-supply
+  - vcc-bg-supply
+  - vcc-quad-supply
+  - vcc-mixer-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
new file mode 100644
index 000000000000..8376d64a641a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27010 color sensor
+
+maintainers:
+  - Matti Vaittinen <[email protected]>
+
+description: |
+  The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear,
+  IR and flickering detection) with five configurable channels. Red, green
+  and flickering detection being always available and two out of the rest
+  three (blue, clear, IR) can be selected to be simultaneously measured.
+  Typical application is adjusting LCD/OLED backlight of TVs, mobile phones
+  and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27010";
+        reg = <0x38>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
new file mode 100644
index 000000000000..67f5389ece67
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata IRS-D200 PIR sensor
+
+maintainers:
+  - Waqar Hameed <[email protected]>
+
+description:
+  PIR sensor for human detection.
+
+properties:
+  compatible:
+    const: murata,irsd200
+
+  reg:
+    items:
+      - enum:
+          - 0x48
+          - 0x49
+        description: |
+          When the AD pin is connected to GND, the slave address is 0x48.
+          When the AD pin is connected to VDD, the slave address is 0x49.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Type should be IRQ_TYPE_EDGE_RISING.
+
+  vdd-supply:
+    description:
+      3.3 V supply voltage.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@48 {
+            compatible = "murata,irsd200";
+            reg = <0x48>;
+            interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&regulator_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5de0bb2180e6..775555d147bf 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -15,6 +15,9 @@ description: |
   Specifications about the devices can be found at:
   https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
 properties:
   compatible:
     enum:
@@ -102,7 +105,7 @@ required:
   - reg
   - "#io-channel-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
index b3aa2ebf9661..48f221463166 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -13,6 +13,9 @@ maintainers:
 description: |
   Semtech's SX9324 proximity sensor.
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
 properties:
   compatible:
     const: semtech,sx9324
@@ -167,7 +170,7 @@ required:
   - reg
   - "#io-channel-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |