dt-bindings: mfd: Convert stpmic1 bindings to json-schema

Convert stpmic1 bindings to json-schema.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 64 deletions

diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
deleted file mode 100644
index 6189df71ea98..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-STMicroelectronics STPMIC1 Voltage regulators
-
-Regulator Nodes are optional depending on needs.
-
-Available Regulators in STPMIC1 device are:
-  - buck1 for Buck BUCK1
-  - buck2 for Buck BUCK2
-  - buck3 for Buck BUCK3
-  - buck4 for Buck BUCK4
-  - ldo1 for LDO LDO1
-  - ldo2 for LDO LDO2
-  - ldo3 for LDO LDO3
-  - ldo4 for LDO LDO4
-  - ldo5 for LDO LDO5
-  - ldo6 for LDO LDO6
-  - vref_ddr for LDO Vref DDR
-  - boost for Buck BOOST
-  - pwr_sw1 for VBUS_OTG switch
-  - pwr_sw2 for SW_OUT switch
-
-Switches are fixed voltage regulators with only enable/disable capability.
-
-Optional properties:
-- st,mask-reset: mask reset for this regulator: the regulator configuration
-  is maintained during pmic reset.
-- regulator-over-current-protection:
-    if set, all regulators are switched off in case of over-current detection
-    on this regulator,
-    if not set, the driver only sends an over-current event.
-- interrupts: index of current limit detection interrupt
-- <regulator>-supply: phandle to the parent supply/regulator node
-	each regulator supply can be described except vref_ddr.
-- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
-
-Example:
-regulators {
-	compatible = "st,stpmic1-regulators";
-
-	ldo6-supply = <&v3v3>;
-
-	vdd_core: buck1 {
-		regulator-name = "vdd_core";
-		interrupts = <IT_CURLIM_BUCK1 0>;
-		st,mask-reset;
-		regulator-pull-down;
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <1200000>;
-	};
-
-	v3v3: buck4 {
-		regulator-name = "v3v3";
-		interrupts = <IT_CURLIM_BUCK4 0>;
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	v1v8: ldo6 {
-		regulator-name = "v1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-over-current-protection;
-	};
-};