Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "There are a few separately maintained driver subsystems that we merge
  through the SoC tree, notable changes are:

   - Memory controller updates, mainly for Tegra and Mediatek SoCs, and
     clarifications for the memory controller DT bindings

   - SCMI firmware interface updates, in particular a new transport
     based on OPTEE and support for atomic operations.

   - Cleanups to the TEE subsystem, refactoring its memory management

  For SoC specific drivers without a separate subsystem, changes include

   - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
     Layerscape SoCs.

   - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
     and Qualcomm SM8450.

   - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
     NVIDIA Tegra chips"

* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
  ARM: spear: fix typos in comments
  soc/microchip: fix invalid free in mpfs_sys_controller_delete
  soc: s4: Add support for power domains controller
  dt-bindings: power: add Amlogic s4 power domains bindings
  ARM: at91: add support in soc driver for new SAMA5D29
  soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
  dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
  memory: emif: check the pointer temp in get_device_details()
  memory: emif: Add check for setup_interrupts
  dt-bindings: arm: mediatek: mmsys: add support for MT8186
  dt-bindings: mediatek: add compatible for MT8186 pwrap
  soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
  soc: mediatek: mmsys: add mmsys reset control for MT8186
  soc: mediatek: mtk-infracfg: Disable ACP on MT8192
  soc: ti: k3-socinfo: Add AM62x JTAG ID
  soc: mediatek: add MTK mutex support for MT8186
  soc: mediatek: mmsys: add mt8186 mmsys routing table
  soc: mediatek: pm-domains: Add support for mt8186
  dt-bindings: power: Add MT8186 power domains
  soc: mediatek: pm-domains: Add support for mt8195
  ...

1 files changed, 0 insertions, 58 deletions

diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-	compatible	= "jedec,lpddr3-timings";
-	reg		= <800000000>; /* workaround: it shows max-freq */
-	min-freq	= <100000000>;
-	tRFC		= <65000>;
-	tRRD		= <6000>;
-	tRPab		= <12000>;
-	tRPpb		= <12000>;
-	tRCD		= <10000>;
-	tRC		= <33750>;
-	tRAS		= <23000>;
-	tWTR		= <3750>;
-	tWR		= <7500>;
-	tRTP		= <3750>;
-	tW2W-C2C	= <0>;
-	tR2R-C2C	= <0>;
-	tFAW		= <25000>;
-	tXSR		= <70000>;
-	tXP		= <3750>;
-	tCKE		= <3750>;
-	tCKESR		= <3750>;
-	tMRD		= <7000>;
-};