Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

15 files changed, 297 insertions, 238 deletions

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index 944ff2f1cf93..e77523b02fad 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -66,10 +66,9 @@ properties:
       - allwinner,sun50i-h6-display-engine
 
   allwinner,pipelines:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 5d4915aed1e2..75e6479397a5 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -21,8 +21,8 @@ properties:
       - const: allwinner,sun5i-a10s-hdmi
       - const: allwinner,sun6i-a31-hdmi
       - items:
-        - const: allwinner,sun7i-a20-hdmi
-        - const: allwinner,sun5i-a10s-hdmi
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
 
   reg:
     maxItems: 1
@@ -33,32 +33,32 @@ properties:
   clocks:
     oneOf:
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
 
       - items:
-        - description: The HDMI interface clock
-        - description: The HDMI module clock
-        - description: The HDMI DDC clock
-        - description: The first video PLL
-        - description: The second video PLL
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
 
   clock-names:
     oneOf:
       - items:
-        - const: ahb
-        - const: mod
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
 
       - items:
-        - const: ahb
-        - const: mod
-        - const: ddc
-        - const: pll-0
-        - const: pll-1
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index e5344c4ae226..4c15a2644a7c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -35,26 +35,26 @@ properties:
       - const: allwinner,sun9i-a80-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun7i-a20-tcon0
-          - allwinner,sun7i-a20-tcon1
-        - const: allwinner,sun7i-a20-tcon
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
 
       - items:
-        - enum:
-            - allwinner,sun50i-a64-tcon-lcd
-        - const: allwinner,sun8i-a83t-tcon-lcd
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-tcon-tv
-          - allwinner,sun50i-a64-tcon-tv
-        - const: allwinner,sun8i-a83t-tcon-tv
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
 
       - items:
-        - enum:
-          - allwinner,sun50i-h6-tcon-tv
-        - const: allwinner,sun8i-r40-tcon-tv
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
 
   reg:
     maxItems: 1
@@ -71,11 +71,10 @@ properties:
     maxItems: 4
 
   clock-output-names:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - maxItems: 1
     description:
       Name of the LCD pixel clock created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    maxItems: 1
 
   dmas:
     maxItems: 1
@@ -83,37 +82,37 @@ properties:
   resets:
     anyOf:
       - items:
-        - description: TCON Reset Line
+          - description: TCON Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
 
       - items:
-        - description: TCON Reset Line
-        - description: TCON eDP Reset Line
-        - description: TCON LVDS Reset Line
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
 
   reset-names:
     oneOf:
       - const: lcd
 
       - items:
-        - const: lcd
-        - const: lvds
+          - const: lcd
+          - const: lvds
 
       - items:
-        - const: lcd
-        - const: edp
+          - const: lcd
+          - const: edp
 
       - items:
-        - const: lcd
-        - const: edp
-        - const: lvds
+          - const: lcd
+          - const: edp
+          - const: lvds
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index e73662c8d339..63f948175239 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -76,28 +76,28 @@ required:
 allOf:
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun6i-a31-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 2
+      properties:
+        clocks:
+          minItems: 2
 
-        required:
-          - clock-names
+      required:
+        - clock-names
 
   - if:
       properties:
-         compatible:
-           contains:
-             const: allwinner,sun50i-a64-mipi-dsi
+        compatible:
+          contains:
+            const: allwinner,sun50i-a64-mipi-dsi
 
     then:
-        properties:
-          clocks:
-            minItems: 1
+      properties:
+        clocks:
+          minItems: 1
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4d6795690ac3..fa4769a0b26e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -29,11 +29,11 @@ properties:
       - const: allwinner,sun50i-h6-dw-hdmi
 
       - items:
-        - enum:
-          - allwinner,sun8i-h3-dw-hdmi
-          - allwinner,sun8i-r40-dw-hdmi
-          - allwinner,sun50i-a64-dw-hdmi
-        - const: allwinner,sun8i-a83t-dw-hdmi
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 000000000000..3ba477aefdd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7808
+      - analogix,anx7812
+      - analogix,anx7814
+      - analogix,anx7818
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the INTP interrupt.
+
+  hpd-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Which GPIO to use for hpd.
+
+  pd-gpios:
+    maxItems: 1
+    description: Which GPIO to use for power down.
+
+  reset-gpios:
+    maxItems: 1
+    description: Which GPIO to use for reset.
+
+  dvdd10-supply:
+    description: Regulator for 1.0V digital core power.
+
+  ports:
+    type: object
+    description:
+      A node containing input and output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+
+    properties:
+      port@0:
+        type: object
+        description: Video port for HDMI input.
+
+        properties:
+          reg:
+            const: 0
+
+      port@1:
+        type: object
+        description:
+          Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+        properties:
+          reg:
+            const: 1
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7814: bridge@38 {
+            compatible = "analogix,anx7814";
+            reg = <0x38>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+            pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    anx7814_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    anx7814_out: endpoint {
+                        remote-endpoint = <&edp_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
deleted file mode 100644
index 17258747fff6..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible		: Must be one of:
-			  "analogix,anx7808"
-			  "analogix,anx7812"
-			  "analogix,anx7814"
-			  "analogix,anx7818"
- - reg			: I2C address of the device
- - interrupts		: Should contain the INTP interrupt
- - hpd-gpios		: Which GPIO to use for hpd
- - pd-gpios		: Which GPIO to use for power down
- - reset-gpios		: Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply	: Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	anx7814: anx7814@38 {
-		compatible = "analogix,anx7814";
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
-		hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
-		pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
-		port {
-			anx7814_in: endpoint {
-				remote-endpoint = <&hdmi0_out>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 800c63764e71..68951d56ebba 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -32,17 +32,17 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
-          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
-          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
-        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
-        - enum:
-          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
-        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+          - enum:
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
-        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
 
   ports:
     type: object
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index a747b755ad06..45fe8fe5faba 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -48,9 +48,8 @@ properties:
   rotation:
     description:
       Display rotation in degrees counter clockwise (0,90,180,270)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 90, 180, 270 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
 
   # Display Timings
   panel-timing:
@@ -58,16 +57,14 @@ properties:
       Most display panels are restricted to a single resolution and
       require specific display timings. The panel-timing subnode expresses those
       timings.
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
   display-timings:
     description:
       Some display panels support several resolutions with different timings.
       The display-timings bindings supports specifying several timings and
       optionally specifying which is the native mode.
-    allOf:
-      - $ref: display-timings.yaml#
+    $ref: display-timings.yaml#
 
   # Connectivity
   port:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index bd558ad7891f..182c19cb7fdd 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -72,92 +72,80 @@ properties:
   hfront-porch:
     description: Horizontal front porch panel timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of pixels
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
 
   hback-porch:
     description: Horizontal back porch timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of pixels
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
 
   hsync-len:
     description: Horizontal sync length panel timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of pixels
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of pixels
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
 
   vfront-porch:
     description: Vertical front porch panel timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of lines
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
 
   vback-porch:
     description: Vertical back porch panel timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of lines
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
 
   vsync-len:
     description: Vertical sync length panel timing
     oneOf:
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
-          items:
-            description: typical number of lines
-      - allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
-          maxItems: 3
-          items:
-            description: min, typ, max number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        maxItems: 1
+        items:
+          description: typical number of lines
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
 
   hsync-active:
     description: |
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 185dcc8fd1f9..78d060097052 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -18,7 +18,7 @@ properties:
   reg: true
   reset-gpios: true
   vddi-supply:
-     description: regulator that supplies the vddi voltage
+    description: regulator that supplies the vddi voltage
   enforce-video-mode: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 6913923df569..d5c46a3cc2b0 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -19,9 +19,9 @@ properties:
   backlight: true
   reset-gpios: true
   iovcc-supply:
-     description: regulator that supplies the iovcc voltage
+    description: regulator that supplies the iovcc voltage
   vci-supply:
-     description: regulator that supplies the vci voltage
+    description: regulator that supplies the vci voltage
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index a57037b9e9ba..561efaaa5a91 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -21,15 +21,15 @@ properties:
   compatible:
     oneOf:
       - items:
-        - enum:
-          - renesas,r8a7795-cmm
-          - renesas,r8a7796-cmm
-          - renesas,r8a77965-cmm
-          - renesas,r8a77990-cmm
-          - renesas,r8a77995-cmm
-        - const: renesas,rcar-gen3-cmm
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
       - items:
-        - const: renesas,rcar-gen2-cmm
+          - const: renesas,rcar-gen2-cmm
 
   reg:
     maxItems: 1
@@ -60,7 +60,7 @@ examples:
     cmm0: cmm@fea40000 {
          compatible = "renesas,r8a7796-cmm",
                       "renesas,rcar-gen3-cmm";
-         reg = <0 0xfea40000 0 0x1000>;
+         reg = <0xfea40000 0x1000>;
          power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
          clocks = <&cpg CPG_MOD 711>;
          resets = <&cpg 711>;
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index eb04c2330698..4f9185462ed3 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -88,9 +88,8 @@ properties:
       - "#size-cells"
 
   ti,am65x-oldi-io-ctrl:
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
-      - maxItems: 1
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    maxItems: 1
     description:
       phandle to syscon device node mapping OLDI IO_CTRL registers.
       The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
@@ -123,13 +122,13 @@ examples:
 
     dss: dss@4a00000 {
             compatible = "ti,am65x-dss";
-            reg =   <0x0 0x04a00000 0x0 0x1000>, /* common */
-                    <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
-                    <0x0 0x04a06000 0x0 0x1000>, /* vid */
-                    <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
-                    <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
-                    <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
-                    <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+            reg =   <0x04a00000 0x1000>, /* common */
+                    <0x04a02000 0x1000>, /* vidl1 */
+                    <0x04a06000 0x1000>, /* vid */
+                    <0x04a07000 0x1000>, /* ovr1 */
+                    <0x04a08000 0x1000>, /* ovr2 */
+                    <0x04a0a000 0x1000>, /* vp1 */
+                    <0x04a0b000 0x1000>; /* vp2 */
             reg-names = "common", "vidl1", "vid",
                     "ovr1", "ovr2", "vp1", "vp2";
             ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index eb4b1a266210..bbd76591c180 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -156,23 +156,23 @@ examples:
 
     dss: dss@4a00000 {
             compatible = "ti,j721e-dss";
-            reg =   <0x00 0x04a00000 0x00 0x10000>, /* common_m */
-                    <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
-                    <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
-                    <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
-                    <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
-                    <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
-                    <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
-                    <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
-                    <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
-                    <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
-                    <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
-                    <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
-                    <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
-                    <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
-                    <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
-                    <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
-                    <0x00 0x04af0000 0x00 0x10000>; /* wb */
+            reg =   <0x04a00000 0x10000>, /* common_m */
+                    <0x04a10000 0x10000>, /* common_s0*/
+                    <0x04b00000 0x10000>, /* common_s1*/
+                    <0x04b10000 0x10000>, /* common_s2*/
+                    <0x04a20000 0x10000>, /* vidl1 */
+                    <0x04a30000 0x10000>, /* vidl2 */
+                    <0x04a50000 0x10000>, /* vid1 */
+                    <0x04a60000 0x10000>, /* vid2 */
+                    <0x04a70000 0x10000>, /* ovr1 */
+                    <0x04a90000 0x10000>, /* ovr2 */
+                    <0x04ab0000 0x10000>, /* ovr3 */
+                    <0x04ad0000 0x10000>, /* ovr4 */
+                    <0x04a80000 0x10000>, /* vp1 */
+                    <0x04aa0000 0x10000>, /* vp2 */
+                    <0x04ac0000 0x10000>, /* vp3 */
+                    <0x04ae0000 0x10000>, /* vp4 */
+                    <0x04af0000 0x10000>; /* wb */
             reg-names = "common_m", "common_s0",
                     "common_s1", "common_s2",
                     "vidl1", "vidl2","vid1","vid2",