Merge tag 'timers-v5.11' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

 - Add static annotation for the sp804 init functions (Zhen Lei)

 - Code cleanups and error code path at init time fixes on the sp804
   (Kefen Wang)

 - Add new OST timer driver device tree bindings (Zhou Yanjie)

 - Remove EZChip NPS clocksource driver corresponding to the NPS
   platform which was removed from the ARC architecture (Vineet Gupta)

 - Add missing clk_disable_unprepare() on error path for Orion (Yang
   Yingliang)

 - Add device tree bindings documentation for Renesas r8a774e1
   (Marian-Cristian Rotariu)

 - Convert Renesas TMU to json-schema (Geert Uytterhoeven)

 - Fix memory leak on the error path at init time on the cadence_ttc
   driver (Yu Kuai)

 - Fix section mismatch for Ingenic timer driver (Daniel Lezcano)

 - Make RISCV_TIMER depends on RISCV_SBI (Kefeng Wang)

Link: https://lore.kernel.org/r/028084fa-d29b-a1d5-7eab-17f77ef69863@linaro.org

10 files changed, 142 insertions, 393 deletions

diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
deleted file mode 100644
index 29159f4e65ab..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Renesas R-Mobile/R-Car Timer Unit (TMU)
-
-The TMU is a 32-bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. The TMU hardware supports up to three channels.
-
-Required Properties:
-
-  - compatible: must contain one or more of the following:
-    - "renesas,tmu-r8a7740" for the r8a7740 TMU
-    - "renesas,tmu-r8a774a1" for the r8a774A1 TMU
-    - "renesas,tmu-r8a774b1" for the r8a774B1 TMU
-    - "renesas,tmu-r8a774c0" for the r8a774C0 TMU
-    - "renesas,tmu-r8a7778" for the r8a7778 TMU
-    - "renesas,tmu-r8a7779" for the r8a7779 TMU
-    - "renesas,tmu-r8a77970" for the r8a77970 TMU
-    - "renesas,tmu-r8a77980" for the r8a77980 TMU
-    - "renesas,tmu" for any TMU.
-      This is a fallback for the above renesas,tmu-* entries
-
-  - reg: base address and length of the registers block for the timer module.
-
-  - interrupts: interrupt-specifier for the timer, one per channel.
-
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-Optional Properties:
-
-  - #renesas,channels: number of channels implemented by the timer, must be 2
-    or 3 (if not specified the value defaults to 3).
-
-
-Example: R8A7779 (R-Car H1) TMU0 node
-
-	tmu0: timer@ffd80000 {
-		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
-		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
-		clock-names = "fck";
-
-		#renesas,channels = <3>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
new file mode 100644
index 000000000000..c54188731a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,tmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile/R-Car Timer Unit (TMU)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The TMU is a 32-bit timer/counter with configurable clock inputs and
+  programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value
+  are independent. The TMU hardware supports up to three channels.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,tmu-r8a7740  # R-Mobile A1
+          - renesas,tmu-r8a774a1 # RZ/G2M
+          - renesas,tmu-r8a774b1 # RZ/G2N
+          - renesas,tmu-r8a774c0 # RZ/G2E
+          - renesas,tmu-r8a774e1 # RZ/G2H
+          - renesas,tmu-r8a7778  # R-Car M1A
+          - renesas,tmu-r8a7779  # R-Car H1
+          - renesas,tmu-r8a77970 # R-Car V3M
+          - renesas,tmu-r8a77980 # R-Car V3H
+      - const: renesas,tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#renesas,channels':
+    description:
+      Number of channels implemented by the timer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 3 ]
+    default: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,tmu-r8a7740
+            - renesas,tmu-r8a7778
+            - renesas,tmu-r8a7779
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7779-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7779-sysc.h>
+    tmu0: timer@ffd80000 {
+            compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+            reg = <0xffd80000 0x30>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+            #renesas,channels = <3>;
+    };
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..9f00b8385fd4 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -275,16 +275,6 @@ config CLKSRC_TI_32K
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
 
-config CLKSRC_NPS
-	bool "NPS400 clocksource driver" if COMPILE_TEST
-	depends on !PHYS_ADDR_T_64BIT
-	select CLKSRC_MMIO
-	select TIMER_OF if OF
-	help
-	  NPS400 clocksource support.
-	  It has a 64-bit counter with update rate up to 1000MHz.
-	  This counter is accessed via couple of 32-bit memory-mapped registers.
-
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
@@ -654,7 +644,7 @@ config ATCPIT100_TIMER
 
 config RISCV_TIMER
 	bool "Timer for the RISC-V platform" if COMPILE_TEST
-	depends on GENERIC_SCHED_CLOCK && RISCV
+	depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
 	select TIMER_PROBE
 	select TIMER_OF
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1c444cc3bb44..3c75cbbf8533 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_CLKSRC_QCOM)	+= timer-qcom.o
 obj-$(CONFIG_MTK_TIMER)		+= timer-mediatek.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= timer-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
-obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 obj-$(CONFIG_OWL_TIMER)		+= timer-owl.o
 obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-milbeaut.o
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
index 58fd9189fab7..905fd6b163a8 100644
--- a/drivers/clocksource/ingenic-timer.c
+++ b/drivers/clocksource/ingenic-timer.c
@@ -127,7 +127,7 @@ static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
+static struct clk *ingenic_tcu_get_clock(struct device_node *np, int id)
 {
 	struct of_phandle_args args;
 
diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c
index 80e960602030..4efd0cf3b602 100644
--- a/drivers/clocksource/timer-cadence-ttc.c
+++ b/drivers/clocksource/timer-cadence-ttc.c
@@ -413,10 +413,8 @@ static int __init ttc_setup_clockevent(struct clk *clk,
 	ttcce->ttc.clk = clk;
 
 	err = clk_prepare_enable(ttcce->ttc.clk);
-	if (err) {
-		kfree(ttcce);
-		return err;
-	}
+	if (err)
+		goto out_kfree;
 
 	ttcce->ttc.clk_rate_change_nb.notifier_call =
 		ttc_rate_change_clockevent_cb;
@@ -426,7 +424,7 @@ static int __init ttc_setup_clockevent(struct clk *clk,
 				    &ttcce->ttc.clk_rate_change_nb);
 	if (err) {
 		pr_warn("Unable to register clock notifier.\n");
-		return err;
+		goto out_kfree;
 	}
 
 	ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
@@ -455,15 +453,17 @@ static int __init ttc_setup_clockevent(struct clk *clk,
 
 	err = request_irq(irq, ttc_clock_event_interrupt,
 			  IRQF_TIMER, ttcce->ce.name, ttcce);
-	if (err) {
-		kfree(ttcce);
-		return err;
-	}
+	if (err)
+		goto out_kfree;
 
 	clockevents_config_and_register(&ttcce->ce,
 			ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
 
 	return 0;
+
+out_kfree:
+	kfree(ttcce);
+	return err;
 }
 
 static int __init ttc_timer_probe(struct platform_device *pdev)
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
deleted file mode 100644
index 7b6bb0df96ae..000000000000
--- a/drivers/clocksource/timer-nps.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/cpu.h>
-#include <soc/nps/common.h>
-
-#define NPS_MSU_TICK_LOW	0xC8
-#define NPS_CLUSTER_OFFSET	8
-#define NPS_CLUSTER_NUM		16
-
-/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
-static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
-
-static int __init nps_get_timer_clk(struct device_node *node,
-			     unsigned long *timer_freq,
-			     struct clk **clk)
-{
-	int ret;
-
-	*clk = of_clk_get(node, 0);
-	ret = PTR_ERR_OR_ZERO(*clk);
-	if (ret) {
-		pr_err("timer missing clk\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(*clk);
-	if (ret) {
-		pr_err("Couldn't enable parent clk\n");
-		clk_put(*clk);
-		return ret;
-	}
-
-	*timer_freq = clk_get_rate(*clk);
-	if (!(*timer_freq)) {
-		pr_err("Couldn't get clk rate\n");
-		clk_disable_unprepare(*clk);
-		clk_put(*clk);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static u64 nps_clksrc_read(struct clocksource *clksrc)
-{
-	int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
-
-	return (u64)ioread32be(nps_msu_reg_low_addr[cluster]);
-}
-
-static int __init nps_setup_clocksource(struct device_node *node)
-{
-	int ret, cluster;
-	struct clk *clk;
-	unsigned long nps_timer1_freq;
-
-
-	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
-		nps_msu_reg_low_addr[cluster] =
-			nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
-				     NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
-
-	ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
-	if (ret)
-		return ret;
-
-	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
-				    nps_timer1_freq, 300, 32, nps_clksrc_read);
-	if (ret) {
-		pr_err("Couldn't register clock source.\n");
-		clk_disable_unprepare(clk);
-	}
-
-	return ret;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
-		       nps_setup_clocksource);
-TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
-		       nps_setup_clocksource);
-
-#ifdef CONFIG_EZNPS_MTM_EXT
-#include <soc/nps/mtm.h>
-
-/* Timer related Aux registers */
-#define NPS_REG_TIMER0_TSI	0xFFFFF850
-#define NPS_REG_TIMER0_LIMIT	0x23
-#define NPS_REG_TIMER0_CTRL	0x22
-#define NPS_REG_TIMER0_CNT	0x21
-
-/*
- * Interrupt Enabled (IE) - re-arm the timer
- * Not Halted (NH) - is cleared when working with JTAG (for debug)
- */
-#define TIMER0_CTRL_IE		BIT(0)
-#define TIMER0_CTRL_NH		BIT(1)
-
-static unsigned long nps_timer0_freq;
-static unsigned long nps_timer0_irq;
-
-static void nps_clkevent_rm_thread(void)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-
-	/* remove thread from TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads &= ~(1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* Acknowledge and if needed re-arm the timer */
-	if (!enabled_threads)
-		write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
-	else
-		write_aux_reg(NPS_REG_TIMER0_CTRL,
-			      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-static void nps_clkevent_add_thread(unsigned long delta)
-{
-	int thread;
-	unsigned int cflags, enabled_threads;
-
-	hw_schd_save(&cflags);
-
-	/* add thread to TSI1 */
-	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
-	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
-	enabled_threads |= (1 << thread);
-	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
-
-	/* set next timer event */
-	write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
-	write_aux_reg(NPS_REG_TIMER0_CNT, 0);
-	write_aux_reg(NPS_REG_TIMER0_CTRL,
-		      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
-
-	hw_schd_restore(cflags);
-}
-
-/*
- * Whenever anyone tries to change modes, we just mask interrupts
- * and wait for the next event to get set.
- */
-static int nps_clkevent_set_state(struct clock_event_device *dev)
-{
-	nps_clkevent_rm_thread();
-	disable_percpu_irq(nps_timer0_irq);
-
-	return 0;
-}
-
-static int nps_clkevent_set_next_event(unsigned long delta,
-				       struct clock_event_device *dev)
-{
-	nps_clkevent_add_thread(delta);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
-	.name				=	"NPS Timer0",
-	.features			=	CLOCK_EVT_FEAT_ONESHOT,
-	.rating				=	300,
-	.set_next_event			=	nps_clkevent_set_next_event,
-	.set_state_oneshot		=	nps_clkevent_set_state,
-	.set_state_oneshot_stopped	=	nps_clkevent_set_state,
-	.set_state_shutdown		=	nps_clkevent_set_state,
-	.tick_resume			=	nps_clkevent_set_state,
-};
-
-static irqreturn_t timer_irq_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	nps_clkevent_rm_thread();
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static int nps_timer_starting_cpu(unsigned int cpu)
-{
-	struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
-
-	evt->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
-	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static int nps_timer_dying_cpu(unsigned int cpu)
-{
-	disable_percpu_irq(nps_timer0_irq);
-	return 0;
-}
-
-static int __init nps_setup_clockevent(struct device_node *node)
-{
-	struct clk *clk;
-	int ret;
-
-	nps_timer0_irq = irq_of_parse_and_map(node, 0);
-	if (nps_timer0_irq <= 0) {
-		pr_err("clockevent: missing irq\n");
-		return -EINVAL;
-	}
-
-	ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
-	if (ret)
-		return ret;
-
-	/* Needs apriori irq_set_percpu_devid() done in intc map function */
-	ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
-				 "Timer0 (per-cpu-tick)",
-				 &nps_clockevent_device);
-	if (ret) {
-		pr_err("Couldn't request irq\n");
-		clk_disable_unprepare(clk);
-		return ret;
-	}
-
-	ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
-				"clockevents/nps:starting",
-				nps_timer_starting_cpu,
-				nps_timer_dying_cpu);
-	if (ret) {
-		pr_err("Failed to setup hotplug state\n");
-		clk_disable_unprepare(clk);
-		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
-		return ret;
-	}
-
-	return 0;
-}
-
-TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
-		       nps_setup_clockevent);
-#endif /* CONFIG_EZNPS_MTM_EXT */
diff --git a/drivers/clocksource/timer-orion.c b/drivers/clocksource/timer-orion.c
index d01ff4181867..5101e834d78f 100644
--- a/drivers/clocksource/timer-orion.c
+++ b/drivers/clocksource/timer-orion.c
@@ -143,7 +143,8 @@ static int __init orion_timer_init(struct device_node *np)
 	irq = irq_of_parse_and_map(np, 1);
 	if (irq <= 0) {
 		pr_err("%pOFn: unable to parse timer1 irq\n", np);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_unprep_clk;
 	}
 
 	rate = clk_get_rate(clk);
@@ -160,7 +161,7 @@ static int __init orion_timer_init(struct device_node *np)
 				    clocksource_mmio_readl_down);
 	if (ret) {
 		pr_err("Failed to initialize mmio timer\n");
-		return ret;
+		goto out_unprep_clk;
 	}
 
 	sched_clock_register(orion_read_sched_clock, 32, rate);
@@ -170,7 +171,7 @@ static int __init orion_timer_init(struct device_node *np)
 			  "orion_event", NULL);
 	if (ret) {
 		pr_err("%pOFn: unable to setup irq\n", np);
-		return ret;
+		goto out_unprep_clk;
 	}
 
 	ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
@@ -183,5 +184,9 @@ static int __init orion_timer_init(struct device_node *np)
 	orion_delay_timer_init(rate);
 
 	return 0;
+
+out_unprep_clk:
+	clk_disable_unprepare(clk);
+	return ret;
 }
 TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 6e8ad4a4ea3c..401d592e85f5 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -5,6 +5,9 @@
  *  Copyright (C) 1999 - 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  */
+
+#define pr_fmt(fmt)    KBUILD_MODNAME ": " fmt
+
 #include <linux/clk.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
@@ -34,8 +37,7 @@
 #define HISI_TIMER_BGLOAD	0x20
 #define HISI_TIMER_BGLOAD_H	0x24
 
-
-struct sp804_timer __initdata arm_sp804_timer = {
+static struct sp804_timer arm_sp804_timer __initdata = {
 	.load		= TIMER_LOAD,
 	.value		= TIMER_VALUE,
 	.ctrl		= TIMER_CTRL,
@@ -44,7 +46,7 @@ struct sp804_timer __initdata arm_sp804_timer = {
 	.width		= 32,
 };
 
-struct sp804_timer __initdata hisi_sp804_timer = {
+static struct sp804_timer hisi_sp804_timer __initdata = {
 	.load		= HISI_TIMER_LOAD,
 	.load_h		= HISI_TIMER_LOAD_H,
 	.value		= HISI_TIMER_VALUE,
@@ -59,40 +61,23 @@ static struct sp804_clkevt sp804_clkevt[NR_TIMERS];
 
 static long __init sp804_get_clock_rate(struct clk *clk, const char *name)
 {
-	long rate;
 	int err;
 
 	if (!clk)
 		clk = clk_get_sys("sp804", name);
 	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %ld\n", name, PTR_ERR(clk));
+		pr_err("%s clock not found: %ld\n", name, PTR_ERR(clk));
 		return PTR_ERR(clk);
 	}
 
-	err = clk_prepare(clk);
-	if (err) {
-		pr_err("sp804: clock failed to prepare: %d\n", err);
-		clk_put(clk);
-		return err;
-	}
-
-	err = clk_enable(clk);
+	err = clk_prepare_enable(clk);
 	if (err) {
-		pr_err("sp804: clock failed to enable: %d\n", err);
-		clk_unprepare(clk);
+		pr_err("clock failed to enable: %d\n", err);
 		clk_put(clk);
 		return err;
 	}
 
-	rate = clk_get_rate(clk);
-	if (rate < 0) {
-		pr_err("sp804: clock failed to get rate: %ld\n", rate);
-		clk_disable(clk);
-		clk_unprepare(clk);
-		clk_put(clk);
-	}
-
-	return rate;
+	return clk_get_rate(clk);
 }
 
 static struct sp804_clkevt * __init sp804_clkevt_get(void __iomem *base)
@@ -117,10 +102,10 @@ static u64 notrace sp804_read(void)
 	return ~readl_relaxed(sched_clkevt->value);
 }
 
-int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
-						  const char *name,
-						  struct clk *clk,
-						  int use_sched_clock)
+static int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
+							 const char *name,
+							 struct clk *clk,
+							 int use_sched_clock)
 {
 	long rate;
 	struct sp804_clkevt *clkevt;
@@ -216,8 +201,8 @@ static struct clock_event_device sp804_clockevent = {
 	.rating			= 300,
 };
 
-int __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
-				  struct clk *clk, const char *name)
+static int __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+					 struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
 	long rate;
@@ -236,7 +221,7 @@ int __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 
 	if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
 			"timer", &sp804_clockevent))
-		pr_err("%s: request_irq() failed\n", "timer");
+		pr_err("request_irq() failed\n");
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 
 	return 0;
@@ -298,7 +283,7 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
 	if (of_clk_get_parent_count(np) == 3) {
 		clk2 = of_clk_get(np, 1);
 		if (IS_ERR(clk2)) {
-			pr_err("sp804: %pOFn clock not found: %d\n", np,
+			pr_err("%pOFn clock not found: %d\n", np,
 				(int)PTR_ERR(clk2));
 			clk2 = NULL;
 		}
diff --git a/include/dt-bindings/clock/ingenic,sysost.h b/include/dt-bindings/clock/ingenic,sysost.h
index 9ac88e90babf..063791b01ab3 100644
--- a/include/dt-bindings/clock/ingenic,sysost.h
+++ b/include/dt-bindings/clock/ingenic,sysost.h
@@ -1,12 +1,16 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * This header provides clock numbers for the ingenic,tcu DT binding.
+ * This header provides clock numbers for the Ingenic OST DT binding.
  */
 
 #ifndef __DT_BINDINGS_CLOCK_INGENIC_OST_H__
 #define __DT_BINDINGS_CLOCK_INGENIC_OST_H__
 
-#define OST_CLK_PERCPU_TIMER	0
-#define OST_CLK_GLOBAL_TIMER	1
+#define OST_CLK_PERCPU_TIMER	1
+#define OST_CLK_GLOBAL_TIMER	0
+#define OST_CLK_PERCPU_TIMER0	1
+#define OST_CLK_PERCPU_TIMER1	2
+#define OST_CLK_PERCPU_TIMER2	3
+#define OST_CLK_PERCPU_TIMER3	4
 
 #endif /* __DT_BINDINGS_CLOCK_INGENIC_OST_H__ */