diff options
| author | Nikita Travkin <[email protected]> | 2023-12-05 16:48:11 +0500 |
|---|---|---|
| committer | Bjorn Andersson <[email protected]> | 2023-12-15 23:16:07 -0600 |
| commit | feec9f0add432a867f23e29afcd2f7088889b8e2 (patch) | |
| tree | bb0d84020f1d2b9e3ff32a75ef12baa9a6f472a3 | |
| parent | 04fe8f0a68a346048f2432380a74a5e393d59a4c (diff) | |
arm64: dts: qcom: acer-aspire1: Correct audio codec definition
When initially added, a mistake was made in the definition of the codec.
Despite the fact that the DMIC line is connected on the side of the
codec chip, and relevant passive components, including 0-ohm resistors
connecting the dmics, are present, the dmic line is still cut in
another place on the board, which was overlooked.
Correct this by replacing the dmic configuration with a comment
describing this hardware detail.
While at it, also add missing regulators definitions. This is not a
functional change as all the relevant regulators were already added via
the other rail supplies.
Fixes: 4a9f8f8f2ada ("arm64: dts: qcom: Add Acer Aspire 1")
Signed-off-by: Nikita Travkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index cfde8cd47107..00b442696618 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -209,9 +209,22 @@ AVDD-supply = <&vreg_l15a_1p8>; MICVDD-supply = <®_codec_3p3>; VBAT-supply = <®_codec_3p3>; + DBVDD-supply = <&vreg_l15a_1p8>; + LDO1-IN-supply = <&vreg_l15a_1p8>; + + /* + * NOTE: The board has a path from this codec to the + * DMIC microphones in the lid, however some of the option + * resistors are absent and the microphones are connected + * to the SoC instead. + * + * If the resistors were to be changed by the user to + * connect the codec, the following could be used: + * + * realtek,dmic1-data-pin = <1>; + * realtek,dmic1-clk-pin = <1>; + */ - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; realtek,jd-src = <1>; }; }; |