diff options
| author | Arınç ÜNAL <[email protected]> | 2024-02-06 01:08:03 +0300 |
|---|---|---|
| committer | Jakub Kicinski <[email protected]> | 2024-02-07 18:53:53 -0800 |
| commit | fd7929095a5211a4cfddb15dd568b4258b07990b (patch) | |
| tree | 92a58174784119a1b2303a968784750a6457eb7f | |
| parent | 01fc42942e30bd56cbb4a4f2107617dc8030b6e0 (diff) | |
net: dsa: mt7530: move XTAL check to mt7530_setup()
The crystal frequency concerns the switch core. The frequency should be
checked when the switch is being set up so the driver can reject the
unsupported hardware earlier and without requiring port 6 to be used.
Move it to mt7530_setup(). Drop the unnecessary function printing.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-2-d7d92a185cb1@arinc9.com
Signed-off-by: Jakub Kicinski <[email protected]>
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index e1bbd9172493..954434ce0f01 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -422,13 +422,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; - if (xtal == HWTRAP_XTAL_20MHZ) { - dev_err(priv->dev, - "%s: MT7530 with a 20MHz XTAL is not supported!\n", - __func__); - return -EINVAL; - } - switch (interface) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; @@ -2259,6 +2252,12 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) { + dev_err(priv->dev, + "MT7530 with a 20MHz XTAL is not supported!\n"); + return -EINVAL; + } + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | |