Merge tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for genpd support for v5.13

In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.

These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.

We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.

* tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (53 commits)
  ARM: dts: Configure simple-pm-bus for omap5 l3
  ARM: dts: Configure simple-pm-bus for omap5 l4_cfg
  ARM: dts: Configure simple-pm-bus for omap5 l4_per
  ARM: dts: Configure simple-pm-bus for omap5 l4_wkup
  ARM: dts: Move omap5 l3-noc to a separate node
  ARM: dts: Move omap5 mmio-sram out of l3 interconnect
  ARM: dts: Configure interconnect target module for omap5 sata
  ARM: dts: Configure interconnect target module for omap5 gpmc
  ARM: dts: Configure interconnect target module for omap5 mpu
  ARM: dts: Configure interconnect target module for omap5 emif
  ARM: dts: Configure interconnect target module for omap5 dmm
  ARM: dts: Prepare for simple-pm-bus for omap4 l3
  ARM: dts: Configure simple-pm-bus for omap4 l4_cfg
  ARM: dts: Configure simple-pm-bus for omap4 l4_per
  ARM: dts: Configure simple-pm-bus for omap4 l4_wkup
  ARM: dts: Move omap4 l3-noc to a separate node
  ARM: dts: Move omap4 mmio-sram out of l3 interconnect
  ARM: dts: Configure interconnect target module for omap4 mpu
  ARM: dts: Configure interconnect target module for omap4 debugss
  ARM: dts: Configure interconnect target module for omap4 emif
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

17 files changed, 727 insertions, 304 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5b213a1e68bb..5e33d0e88f5b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 3bf90d9e3335..1c50ae7b0e17 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1,5 +1,8 @@
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,dra7-l4-cfg", "simple-bus";
+	compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_coreaon>;
+	clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -11,7 +14,7 @@
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -493,7 +496,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 27 */
@@ -572,11 +575,34 @@
 		};
 
 		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "sata";
+			reg = <0x400fc 4>,
+			      <0x41100 4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_l3init>;
+			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+			clock-names = "fck";
 			#size-cells = <1>;
+			#address-cells = <1>;
 			ranges = <0x0 0x40000 0x10000>;
+
+			sata: sata@0 {
+				compatible = "snps,dwc-ahci";
+				reg = <0 0x1100>, <0x1100 0x8>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&sata_phy>;
+				phy-names = "sata-phy";
+				clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+				ports-implemented = <0x1>;
+			};
 		};
 
 		target-module@51000 {			/* 0x4a151000, ap 33 50.0 */
@@ -789,7 +815,7 @@
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00018000 0x00218000 0x001000>,	/* ap 43 */
@@ -1006,7 +1032,10 @@
 };
 
 &l4_per1 {						/* 0x48000000 */
-	compatible = "ti,dra7-l4-per1", "simple-bus";
+	compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -1020,7 +1049,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2269,14 +2298,17 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_per2 {						/* 0x48400000 */
-	compatible = "ti,dra7-l4-per2", "simple-bus";
+	compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48400000 0x800>,
 	      <0x48400800 0x800>,
 	      <0x48401000 0x400>,
@@ -2296,7 +2328,7 @@
 		 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
 
 	segment@0 {					/* 0x48400000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -3094,7 +3126,10 @@
 };
 
 &l4_per3 {						/* 0x48800000 */
-	compatible = "ti,dra7-l4-per3", "simple-bus";
+	compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48800000 0x800>,
 	      <0x48800800 0x800>,
 	      <0x48801000 0x400>,
@@ -3106,7 +3141,7 @@
 	ranges = <0x00000000 0x48800000 0x200000>;	/* segment 0 */
 
 	segment@0 {					/* 0x48800000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -4205,7 +4240,10 @@
 };
 
 &l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,dra7-l4-wkup", "simple-bus";
+	compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4ae00000 0x800>,
 	      <0x4ae00800 0x800>,
 	      <0x4ae01000 0x1000>;
@@ -4218,7 +4256,7 @@
 		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
 
 	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -4295,7 +4333,7 @@
 	};
 
 	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -4405,7 +4443,7 @@
 	};
 
 	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
@@ -4511,7 +4549,7 @@
 	};
 
 	segment@30000 {					/* 0x4ae30000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce1194744f84..c988f1d039cf 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -125,18 +125,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the SOC interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -144,16 +132,22 @@
 	 * hierarchy.
 	 */
 	ocp: ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_core>;
+		clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x0 0x44000000 0x0 0x1000000>,
-		      <0x0 0x45000000 0x0 0x1000>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,dra7-l3-noc";
+			reg = <0x44000000 0x1000>,
+			      <0x45000000 0x1000>;
+			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_cfg: interconnect@4a000000 {
 		};
@@ -161,31 +155,61 @@
 		};
 		l4_per1: interconnect@48000000 {
 		};
+
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap5-mpu";
+			};
+		};
+
 		l4_per2: interconnect@48400000 {
 		};
 		l4_per3: interconnect@48800000 {
 		};
 
-		axi@0 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi0: target-module@51000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 0>;
+			reset-names = "rstctrl";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
+			ranges = <0x51000000 0x51000000 0x3000>,
+				 <0x20000000 0x20000000 0x10000000>;
 			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
 			 */
 			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg = <0x51000000 0x2000>,
+				      <0x51002000 0x14c>,
+				      <0x20001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
+					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -209,7 +233,10 @@
 			};
 
 			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+				reg = <0x51000000 0x28>,
+				      <0x51002000 0x14c>,
+				      <0x51001000 0x28>,
+				      <0x20001000 0x10000000>;
 				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 				interrupts = <0 232 0x4>;
 				num-lanes = <1>;
@@ -224,23 +251,38 @@
 			};
 		};
 
-		axi@1 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi1: target-module@51800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 1>;
+			reset-names = "rstctrl";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
+			ranges = <0x51800000 0x51800000 0x3000>,
+				 <0x30000000 0x30000000 0x10000000>;
 			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg = <0x51800000 0x2000>,
+				      <0x51802000 0x14c>,
+				      <0x30001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
+					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -336,8 +378,15 @@
 
 		target-module@43300000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43300000 0x4>;
-			reg-names = "rev";
+			reg = <0x43300000 0x4>,
+			      <0x43300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -369,8 +418,15 @@
 
 		target-module@43400000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43400000 0x4>;
-			reg-names = "rev";
+			reg = <0x43400000 0x4>,
+			      <0x43400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -387,8 +443,15 @@
 
 		target-module@43500000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43500000 0x4>;
-			reg-names = "rev";
+			reg = <0x43500000 0x4>,
+			      <0x43500010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -403,11 +466,24 @@
 			};
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "dmm";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap5-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		ipu1: ipu@58820000 {
@@ -694,32 +770,37 @@
 			>;
 		};
 
-		qspi: spi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>,
-			      <0x5c000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			syscon-chipselects = <&scm_conf 0x558>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+		target-module@4b300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "qspi";
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+			reg = <0x4b300000 0x4>,
+			      <0x4b300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
 			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		/* OCP2SCP3 */
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b300000 0x1000>,
+				 <0x5c000000 0x5c000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,dra7xxx-qspi";
+				reg = <0 0x100>,
+				      <0x5c000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				syscon-chipselects = <&scm_conf 0x558>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+				clock-names = "fck";
+				num-cs = <4>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
 		};
 
 		/* OCP2SCP1 */
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index e0bb60a30779..c83849dfde24 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap4-l4-cfg", "simple-bus";
+	compatible = "ti,omap4-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -16,7 +19,7 @@
 		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -347,7 +350,7 @@
 	};
 
 	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
@@ -639,7 +642,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
@@ -741,13 +744,13 @@
 	};
 
 	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
@@ -903,13 +906,13 @@
 	};
 
 	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
@@ -944,7 +947,10 @@
 };
 
 &l4_wkup {						/* 0x4a300000 */
-	compatible = "ti,omap4-l4-wkup", "simple-bus";
+	compatible = "ti,omap4-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkup>;
+	clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a300000 0x800>,
 	      <0x4a300800 0x800>,
 	      <0x4a301000 0x1000>;
@@ -956,7 +962,7 @@
 		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -1062,7 +1068,7 @@
 	};
 
 	segment@10000 {					/* 0x4a310000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -1231,7 +1237,7 @@
 	};
 
 	segment@20000 {					/* 0x4a320000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
@@ -1284,7 +1290,10 @@
 };
 
 &l4_per {						/* 0x48000000 */
-	compatible = "ti,omap4-l4-per", "simple-bus";
+	compatible = "ti,omap4-l4-per", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -1298,7 +1307,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2437,7 +2446,7 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 72e4f6481776..fc0be942dbeb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -54,14 +59,12 @@
 	};
 
 	/*
-	 * Note that 4430 needs cross trigger interface (CTI) supported
-	 * before we can configure the interrupts. This means sampling
-	 * events are not supported for pmu. Note that 4460 does not use
-	 * CTI, see also 4460.dtsi.
+	 * Needed early by omap4_sram_init() for barrier, do not move to l3
+	 * interconnect as simple-pm-bus probes at module_init() time.
 	 */
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		ti,hwmods = "debugss";
+	ocmcram: sram@40304000 {
+		compatible = "mmio-sram";
+		reg = <0x40304000 0xa000>; /* 40k */
 	};
 
 	gic: interrupt-controller@48241000 {
@@ -97,19 +100,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-			sram = <&ocmcram>;
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -117,16 +107,24 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "simple-bus";
+		power-domains = <&prm_l4per>;
+		clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
+			 <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x1000>,
-		      <0x44800000 0x2000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,omap4-l3-noc";
+			reg = <0x44000000 0x1000>,
+			      <0x44800000 0x2000>,
+			      <0x45000000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_wkup: interconnect@4a300000 {
 		};
@@ -137,12 +135,22 @@
 		l4_per: interconnect@48000000 {
 		};
 
-		l4_abe: interconnect@40100000 {
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap4-mpu";
+				sram = <&ocmcram>;
+			};
 		};
 
-		ocmcram: sram@40304000 {
-			compatible = "mmio-sram";
-			reg = <0x40304000 0xa000>; /* 40k */
+		l4_abe: interconnect@40100000 {
 		};
 
 		target-module@50000000 {
@@ -198,6 +206,7 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			ti,sysc-delay-us = <2>;
+			power-domains = <&prm_cam>;
 			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -207,6 +216,27 @@
 			/* No child device binding, driver in staging */
 		};
 
+		/*
+		 * Note that 4430 needs cross trigger interface (CTI) supported
+		 * before we can configure the interrupts. This means sampling
+		 * events are not supported for pmu. Note that 4460 does not use
+		 * CTI, see also 4460.dtsi.
+		 */
+		target-module@54000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			ti,hwmods = "debugss";
+			power-domains = <&prm_emu>;
+			clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000000 0x1000000>;
+
+			pmu: pmu {
+				compatible = "arm,cortex-a9-pmu";
+			};
+		};
+
 		target-module@55082000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55082000 0x4>,
@@ -256,35 +286,70 @@
 			/* No child device binding or driver in mainline */
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap4-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "dmm";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap4-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4c000000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			ti,hwmods = "emif1";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif1: emif@0 {
+				compatible = "ti,emif-4d";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <1>;
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
-		emif2: emif@4d000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4d000000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@4d000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			ti,hwmods = "emif2";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+			reg = <0x4d000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000000 0x1000000>;
+
+			emif2: emif@0 {
+				compatible = "ti,emif-4d";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <1>;
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
 		dsp: dsp {
@@ -435,6 +500,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_gfx>;
 			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2d3e54901b6e..3d6db1db94e0 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -26,13 +26,6 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "debugss";
-	};
-
 	thermal-zones {
 		#include "omap4-cpu-thermal.dtsi"
 	};
@@ -128,4 +121,10 @@
 		 <0x00030000 0x00030000 0x00010000>;
 };
 
+&pmu {
+	compatible = "arm,cortex-a9-pmu";
+	interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 /include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 532868591107..1f1c04d8f472 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 887b3359dd5a..b148b289e830 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -1,5 +1,8 @@
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap5-l4-cfg", "simple-bus";
+	compatible = "ti,omap5-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -15,7 +18,7 @@
 		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -391,7 +394,7 @@
 	};
 
 	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
@@ -654,7 +657,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 59 */
@@ -691,22 +694,44 @@
 		};
 
 		target-module@40000 {			/* 0x4a140000, ap 101 16.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x400fc 4>,
+			      <0x41100 4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_l3init>;
+			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>;
+			clock-names = "fck";
 			#size-cells = <1>;
+			#address-cells = <1>;
 			ranges = <0x0 0x40000 0x10000>;
+
+			sata: sata@0 {
+				compatible = "snps,dwc-ahci";
+				reg = <0 0x1100>, <0x1100 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&sata_phy>;
+				phy-names = "sata-phy";
+				clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+				ports-implemented = <0x1>;
+			};
 		};
 	};
 
 	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 29 */
@@ -912,20 +937,23 @@
 	};
 
 	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@300000 {					/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_per {						/* 0x48000000 */
-	compatible = "ti,omap5-l4-per", "simple-bus";
+	compatible = "ti,omap5-l4-per", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -939,7 +967,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2148,14 +2176,17 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,omap5-l4-wkup", "simple-bus";
+	compatible = "ti,omap5-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4ae00000 0x800>,
 	      <0x4ae00800 0x800>,
 	      <0x4ae01000 0x1000>;
@@ -2167,7 +2198,7 @@
 		 <0x00020000 0x4ae20000 0x010000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2296,7 +2327,7 @@
 	};
 
 	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -2423,7 +2454,7 @@
 	};
 
 	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e025b7c9a357..681fee379b88 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -101,6 +106,15 @@
 			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	/*
+	 * Needed early by omap4_sram_init() for barrier, do not move to l3
+	 * interconnect as simple-pm-bus probes at module_init() time.
+	 */
+	ocmcram: sram@40300000 {
+		compatible = "mmio-sram";
+		reg = <0 0x40300000 0 0x20000>; /* 128k */
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -121,19 +135,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-			sram = <&ocmcram>;
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -141,17 +142,25 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap5-l3-noc", "simple-bus";
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_core>;
+		clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
+			 <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xc0000000>;
 		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0 0x44000000 0 0x2000>,
-		      <0 0x44800000 0 0x3000>,
-		      <0 0x45000000 0 0x4000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,omap5-l3-noc";
+			reg = <0x44000000 0x2000>,
+			      <0x44800000 0x3000>,
+			      <0x45000000 0x4000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_wkup: interconnect@4ae00000 {
 		};
@@ -162,31 +171,58 @@
 		l4_per: interconnect@48000000 {
 		};
 
-		l4_abe: interconnect@40100000 {
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap4-mpu";
+				sram = <&ocmcram>;
+			};
 		};
 
-		ocmcram: sram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x20000>; /* 128k */
+		l4_abe: interconnect@40100000 {
 		};
 
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 4>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			clocks = <&l3_iclk_div>;
+		target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000000 4>,
+			      <0x50000010 4>,
+			      <0x50000014 4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			ti,no-idle-on-init;
+			clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
 			clock-names = "fck";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+				 <0x00000000 0x00000000 0x40000000>; /* data */
+
+			gpmc: gpmc@50000000 {
+				compatible = "ti,omap4430-gpmc";
+				reg = <0x50000000 0x1000>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 4>;
+				dma-names = "rxtx";
+				gpmc,num-cs = <8>;
+				gpmc,num-waitpins = <4>;
+				clock-names = "fck";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
 		};
 
 		target-module@55082000 {
@@ -241,35 +277,70 @@
 			status = "disabled";
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "dmm";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap5-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		emif1: emif@4c000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif1";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4c000000 0x400>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			ti,hwmods = "emif1";
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif1: emif@0 {
+				compatible = "ti,emif-4d5";
+				reg = <0 0x400>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <2>; /* DDR PHY type: Intelli PHY */
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
-		emif2: emif@4d000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif2";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4d000000 0x400>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4d000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			ti,hwmods = "emif2";
+			reg = <0x4d000000 0x4>;
+			reg-names = "rev";
+			clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000000 0x1000000>;
+
+			emif2: emif@0 {
+				compatible = "ti,emif-4d5";
+				reg = <0 0x400>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <2>; /* DDR PHY type: Intelli PHY */
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
 		aes1_target: target-module@4b501000 {
@@ -369,18 +440,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		/* OCP2SCP3 */
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
-		};
-
 		target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 2e3a10914c40..9f304525b193 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -569,10 +569,29 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 	}
 }
 
-void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+static const char * const pdata_quirks_init_nodes[] = {
+	"prcm",
+	"prm",
+};
+
+void __init
+pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
 {
 	struct device_node *np;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) {
+		np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]);
+		if (!np)
+			continue;
 
+		of_platform_populate(np, omap_dt_match_table,
+				     omap_auxdata_lookup, NULL);
+	}
+}
+
+void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+{
 	/*
 	 * We still need this for omap2420 and omap3 PM to work, others are
 	 * using drivers/misc/sram.c already.
@@ -585,13 +604,7 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 
-	/* Populate always-on PRCM in l4_wkup to probe l4_wkup */
-	np = of_find_node_by_name(NULL, "prcm");
-	if (!np)
-		np = of_find_node_by_name(NULL, "prm");
-	if (np)
-		of_platform_populate(np, omap_dt_match_table,
-				     omap_auxdata_lookup, NULL);
+	pdata_quirks_init_clocks(omap_dt_match_table);
 
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 62df666c2bd0..17b66f0d0dee 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 extern struct omap_sr_data omap_sr_pdata[];
 
-static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_init_by_name(const char *name, const char *voltdm)
 {
 	struct omap_sr_data *sr_data = NULL;
 	struct omap_volt_data *volt_data;
-	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	static int i;
 
-	if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
-	    !strncmp(oh->name, "smartreflex_mpu", 16))
+	if (!strncmp(name, "smartreflex_mpu_iva", 20) ||
+	    !strncmp(name, "smartreflex_mpu", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_MPU];
-	else if (!strncmp(oh->name, "smartreflex_core", 17))
+	else if (!strncmp(name, "smartreflex_core", 17))
 		sr_data = &omap_sr_pdata[OMAP_SR_CORE];
-	else if (!strncmp(oh->name, "smartreflex_iva", 16))
+	else if (!strncmp(name, "smartreflex_iva", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_IVA];
 
 	if (!sr_data) {
-		pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+		pr_err("%s: Unknown instance %s\n", __func__, name);
 		return -EINVAL;
 	}
 
-	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
-	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
-		       __func__, oh->name);
-		goto exit;
-	}
-
-	sr_data->name = oh->name;
+	sr_data->name = name;
 	if (cpu_is_omap343x())
 		sr_data->ip_type = 1;
 	else
@@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		}
 	}
 
-	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
+	sr_data->voltdm = voltdm_lookup(voltdm);
 	if (!sr_data->voltdm) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, sr_dev_attr->sensor_voltdm_name);
+			__func__, voltdm);
 		goto exit;
 	}
 
@@ -160,6 +152,20 @@ exit:
 	return 0;
 }
 
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
+
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
+		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+		       __func__, oh->name);
+		return 0;
+	}
+
+	return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name);
+}
+
 /*
  * API to be called from board files to enable smartreflex
  * autocompensation at init.
@@ -169,7 +175,42 @@ void __init omap_enable_smartreflex_on_init(void)
 	sr_enable_on_init = true;
 }
 
+static const char * const omap4_sr_instances[] = {
+	"mpu",
+	"iva",
+	"core",
+};
+
+static const char * const dra7_sr_instances[] = {
+	"mpu",
+	"core",
+};
+
 int __init omap_devinit_smartreflex(void)
 {
+	const char * const *sr_inst;
+	int i, nr_sr = 0;
+
+	if (soc_is_omap44xx()) {
+		sr_inst = omap4_sr_instances;
+		nr_sr = ARRAY_SIZE(omap4_sr_instances);
+
+	} else if (soc_is_dra7xx()) {
+		sr_inst = dra7_sr_instances;
+		nr_sr = ARRAY_SIZE(dra7_sr_instances);
+	}
+
+	if (nr_sr) {
+		const char *name, *voltdm;
+
+		for (i = 0; i < nr_sr; i++) {
+			name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]);
+			voltdm = sr_inst[i];
+			sr_init_by_name(name, voltdm);
+		}
+
+		return 0;
+	}
+
 	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
 }
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index b040447575ad..dcfb32ee5cb6 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -285,7 +285,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 	 */
 	l3->debug_irq = platform_get_irq(pdev, 0);
 	ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
-			       0x0, "l3-dbg-irq", l3);
+			       IRQF_NO_THREAD, "l3-dbg-irq", l3);
 	if (ret) {
 		dev_err(l3->dev, "request_irq failed for %d\n",
 			l3->debug_irq);
@@ -294,7 +294,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 
 	l3->app_irq = platform_get_irq(pdev, 1);
 	ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
-			       0x0, "l3-app-irq", l3);
+			       IRQF_NO_THREAD, "l3-app-irq", l3);
 	if (ret)
 		dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
 
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index a27d751cf219..65943d1a2557 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -635,6 +635,51 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
 	return 0;
 }
 
+/* Interconnect instances to probe before l4_per instances */
+static struct resource early_bus_ranges[] = {
+	/* am3/4 l4_wkup */
+	{ .start = 0x44c00000, .end = 0x44c00000 + 0x300000, },
+	/* omap4/5 and dra7 l4_cfg */
+	{ .start = 0x4a000000, .end = 0x4a000000 + 0x300000, },
+	/* omap4 l4_wkup */
+	{ .start = 0x4a300000, .end = 0x4a300000 + 0x30000,  },
+	/* omap5 and dra7 l4_wkup without dra7 dcan segment */
+	{ .start = 0x4ae00000, .end = 0x4ae00000 + 0x30000,  },
+};
+
+static atomic_t sysc_defer = ATOMIC_INIT(10);
+
+/**
+ * sysc_defer_non_critical - defer non_critical interconnect probing
+ * @ddata: device driver data
+ *
+ * We want to probe l4_cfg and l4_wkup interconnect instances before any
+ * l4_per instances as l4_per instances depend on resources on l4_cfg and
+ * l4_wkup interconnects.
+ */
+static int sysc_defer_non_critical(struct sysc *ddata)
+{
+	struct resource *res;
+	int i;
+
+	if (!atomic_read(&sysc_defer))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(early_bus_ranges); i++) {
+		res = &early_bus_ranges[i];
+		if (ddata->module_pa >= res->start &&
+		    ddata->module_pa <= res->end) {
+			atomic_set(&sysc_defer, 0);
+
+			return 0;
+		}
+	}
+
+	atomic_dec_if_positive(&sysc_defer);
+
+	return -EPROBE_DEFER;
+}
+
 static struct device_node *stdout_path;
 
 static void sysc_init_stdout_path(struct sysc *ddata)
@@ -856,15 +901,19 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
 	struct device_node *np = ddata->dev->of_node;
 	int error;
 
-	if (!of_get_property(np, "reg", NULL))
-		return 0;
-
 	error = sysc_parse_and_check_child_range(ddata);
 	if (error)
 		return error;
 
+	error = sysc_defer_non_critical(ddata);
+	if (error)
+		return error;
+
 	sysc_check_children(ddata);
 
+	if (!of_get_property(np, "reg", NULL))
+		return 0;
+
 	error = sysc_parse_registers(ddata);
 	if (error)
 		return error;
@@ -1447,12 +1496,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("dwc3", 0, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("elm", 0x48080000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
+	SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x40441403, 0xffff0fff, 0),
+	SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x50440500, 0xffffffff, 0),
 	SYSC_QUIRK("epwmss", 0, 0, 0x4, -ENODEV, 0x47400001, 0xffffffff, 0),
 	SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -ENODEV, 0, 0, 0),
 	SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, 0),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50031d00, 0xffffffff, 0),
 	SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
 	SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0),
+	SYSC_QUIRK("keypad", 0x4a31c000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
 	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0),
 	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0),
 	SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0),
@@ -1464,11 +1517,14 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("ocp2scp", 0, 0, -ENODEV, -ENODEV, 0x50060007, 0xffffffff, 0),
 	SYSC_QUIRK("padconf", 0, 0, 0x10, -ENODEV, 0x4fff0800, 0xffffffff, 0),
 	SYSC_QUIRK("padconf", 0, 0, -ENODEV, -ENODEV, 0x40001100, 0xffffffff, 0),
+	SYSC_QUIRK("pcie", 0x51000000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
+	SYSC_QUIRK("pcie", 0x51800000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000100, 0xffffffff, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x00004102, 0xffffffff, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),
@@ -2802,6 +2858,7 @@ static int sysc_init_soc(struct sysc *ddata)
 	const struct soc_device_attribute *match;
 	struct ti_sysc_platform_data *pdata;
 	unsigned long features = 0;
+	struct device_node *np;
 
 	if (sysc_soc)
 		return 0;
@@ -2822,6 +2879,21 @@ static int sysc_init_soc(struct sysc *ddata)
 	if (match && match->data)
 		sysc_soc->soc = (int)match->data;
 
+	/*
+	 * Check and warn about possible old incomplete dtb. We now want to see
+	 * simple-pm-bus instead of simple-bus in the dtb for genpd using SoCs.
+	 */
+	switch (sysc_soc->soc) {
+	case SOC_AM3:
+	case SOC_AM4:
+		np = of_find_node_by_path("/ocp");
+		WARN_ONCE(np && of_device_is_compatible(np, "simple-bus"),
+			  "ti-sysc: Incomplete old dtb, please update\n");
+		break;
+	default:
+		break;
+	}
+
 	/* Ignore devices that are not available on HS and EMU SoCs */
 	if (!sysc_soc->general_purpose) {
 		switch (sysc_soc->soc) {
@@ -3053,7 +3125,9 @@ static int sysc_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	reset_control_assert(ddata->rsts);
+
+	if (!reset_control_status(ddata->rsts))
+		reset_control_assert(ddata->rsts);
 
 unprepare:
 	sysc_unprepare(ddata);
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index f0542391ca4b..90e0a9ea6351 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -156,6 +156,8 @@ static const struct omap_clkctrl_reg_data omap5_l3main1_clkctrl_regs[] __initcon
 
 static const struct omap_clkctrl_reg_data omap5_l3main2_clkctrl_regs[] __initconst = {
 	{ OMAP5_L3_MAIN_2_CLKCTRL, NULL, 0, "l3_iclk_div" },
+	{ OMAP5_L3_MAIN_2_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+	{ OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
 	{ 0 },
 };
 
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index b105af63854a..047cfbdc1330 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -443,8 +443,8 @@ static const struct dw_pcie_ep_ops pcie_ep_ops = {
 	.get_features = dra7xx_pcie_get_features,
 };
 
-static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
-				     struct platform_device *pdev)
+static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
+			      struct platform_device *pdev)
 {
 	int ret;
 	struct dw_pcie_ep *ep;
@@ -472,8 +472,8 @@ static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
 	return 0;
 }
 
-static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
-				       struct platform_device *pdev)
+static int dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
+				struct platform_device *pdev)
 {
 	int ret;
 	struct dw_pcie *pci = dra7xx->pci;
@@ -682,7 +682,7 @@ static int dra7xx_pcie_configure_two_lane(struct device *dev,
 	return 0;
 }
 
-static int __init dra7xx_pcie_probe(struct platform_device *pdev)
+static int dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
 	int ret;
@@ -938,6 +938,7 @@ static const struct dev_pm_ops dra7xx_pcie_pm_ops = {
 };
 
 static struct platform_driver dra7xx_pcie_driver = {
+	.probe = dra7xx_pcie_probe,
 	.driver = {
 		.name	= "dra7-pcie",
 		.of_match_table = of_dra7xx_pcie_match,
@@ -946,4 +947,4 @@ static struct platform_driver dra7xx_pcie_driver = {
 	},
 	.shutdown = dra7xx_pcie_shutdown,
 };
-builtin_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe);
+builtin_platform_driver(dra7xx_pcie_driver);
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index bf1468e5bccb..ea64e187854e 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -88,6 +88,7 @@ struct omap_reset_data {
 #define OMAP_PRM_HAS_RSTCTRL	BIT(0)
 #define OMAP_PRM_HAS_RSTST	BIT(1)
 #define OMAP_PRM_HAS_NO_CLKDM	BIT(2)
+#define OMAP_PRM_RET_WHEN_IDLE	BIT(3)
 
 #define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
 
@@ -174,7 +175,8 @@ static const struct omap_prm_data omap4_prm_data[] = {
 		.name = "core", .base = 0x4a306700,
 		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton,
 		.rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati",
-		.rstmap = rst_map_012
+		.rstmap = rst_map_012,
+		.flags = OMAP_PRM_RET_WHEN_IDLE,
 	},
 	{
 		.name = "ivahd", .base = 0x4a306f00,
@@ -199,7 +201,8 @@ static const struct omap_prm_data omap4_prm_data[] = {
 	},
 	{
 		.name = "l4per", .base = 0x4a307400,
-		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton
+		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton,
+		.flags = OMAP_PRM_RET_WHEN_IDLE,
 	},
 	{
 		.name = "cefuse", .base = 0x4a307600,
@@ -332,7 +335,7 @@ static const struct omap_prm_data dra7_prm_data[] = {
 	{
 		.name = "l3init", .base = 0x4ae07300,
 		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_alwon,
-		.rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012,
+		.rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01,
 		.clkdm_name = "pcie"
 	},
 	{
@@ -517,7 +520,7 @@ static int omap_prm_domain_power_on(struct generic_pm_domain *domain)
 {
 	struct omap_prm_domain *prmd;
 	int ret;
-	u32 v;
+	u32 v, mode;
 
 	prmd = genpd_to_prm_domain(domain);
 	if (!prmd->cap)
@@ -530,7 +533,12 @@ static int omap_prm_domain_power_on(struct generic_pm_domain *domain)
 	else
 		v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl);
 
-	writel_relaxed(v | OMAP_PRMD_ON_ACTIVE,
+	if (prmd->prm->data->flags & OMAP_PRM_RET_WHEN_IDLE)
+		mode = OMAP_PRMD_RETENTION;
+	else
+		mode = OMAP_PRMD_ON_ACTIVE;
+
+	writel_relaxed((v & ~PRM_POWERSTATE_MASK) | mode,
 		       prmd->prm->base + prmd->pwrstctrl);
 
 	/* wait for the transition bit to get cleared */
@@ -830,8 +838,12 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 		       reset->prm->data->name, id);
 
 exit:
-	if (reset->clkdm)
+	if (reset->clkdm) {
+		/* At least dra7 iva needs a delay before clkdm idle */
+		if (has_rstst)
+			udelay(1);
 		pdata->clkdm_allow_idle(reset->clkdm);
+	}
 
 	return ret;
 }
diff --git a/include/dt-bindings/clock/omap5.h b/include/dt-bindings/clock/omap5.h
index 41775272fd27..90e0d4b00127 100644
--- a/include/dt-bindings/clock/omap5.h
+++ b/include/dt-bindings/clock/omap5.h
@@ -32,6 +32,8 @@
 
 /* l3main2 clocks */
 #define OMAP5_L3_MAIN_2_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
+#define OMAP5_L3_MAIN_2_GPMC_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x28)
+#define OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x30)
 
 /* ipu clocks */
 #define OMAP5_MMU_IPU_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)