aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorChukun Pan <[email protected]>2024-06-30 23:00:07 +0800
committerHeiko Stuebner <[email protected]>2024-07-04 21:09:43 +0200
commite261bd74000ca80e5483ba8a8bda509de8cbe7fd (patch)
treefd6f816a460c1b141277c1210d734cc0081935ee
parent2bf5d445df2ec89689d15ea259a916260c936959 (diff)
arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S
Fixed the PHY address and reset GPIOs (does not match the corresponding pinctrl) for gmac0 and gmac1. Fixes: b9f8ca655d80 ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S") Signed-off-by: Chukun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts12
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
index a3339186e89c..ce2a5e1ccefc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -39,7 +39,7 @@
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
- snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 15ms, 50ms for rtl8211f */
snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
- snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 15ms, 50ms for rtl8211f */
snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@
};
&mdio0 {
- rgmii_phy0: ethernet-phy@0 {
+ rgmii_phy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
+ reg = <0x1>;
pinctrl-0 = <&eth_phy0_reset_pin>;
pinctrl-names = "default";
};
};
&mdio1 {
- rgmii_phy1: ethernet-phy@0 {
+ rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
+ reg = <0x1>;
pinctrl-0 = <&eth_phy1_reset_pin>;
pinctrl-names = "default";
};