dt-bindings: cros-ec: Add ChromeOS fingerprint binding

Add a binding to describe the fingerprint processor found on Chromebooks
with a fingerprint sensor. Previously we've been describing this with
the google,cros-ec-spi binding but it lacks gpio and regulator control
used during firmware flashing.

Cc: Rob Herring <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Craig Hesling <[email protected]>
Cc: Tom Hughes <[email protected]>
Cc: Alexandru M Stan <[email protected]>
Cc: Tzung-Bi Shih <[email protected]>
Cc: Matthias Kaehlcke <[email protected]>
Cc: Benson Leung <[email protected]>
Cc: Lee Jones <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

1 files changed, 67 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 659d3f64b550..3d5efa5578d1 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -26,6 +26,11 @@ properties:
           For implementations of the EC connected through SPI.
         const: google,cros-ec-spi
       - description:
+          For implementations of the FPMCU connected through SPI.
+        items:
+          - const: google,cros-ec-fp
+          - const: google,cros-ec-spi
+      - description:
           For implementations of the EC connected through RPMSG.
         const: google,cros-ec-rpmsg
 
@@ -67,6 +72,15 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
   wakeup-source:
     description: Button can wake-up the system.
 
@@ -177,6 +191,41 @@ allOf:
         - reg
         - interrupts
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,cros-ec-fp
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+        typec: false
+        ec-pwm: false
+        kbd-led-backlight: false
+        keyboard-controller: false
+        proximity: false
+        codecs: false
+        cbas: false
+
+      patternProperties:
+        "^i2c-tunnel[0-9]*$": false
+        "^regulator@[0-9]+$": false
+        "^extcon[0-9]*$": false
+
+      # Using additionalProperties: false here and
+      # listing true properties doesn't work
+
+      required:
+        - reset-gpios
+        - boot0-gpios
+        - vdd-supply
+    else:
+      properties:
+        reset-gpios: false
+        boot0-gpios: false
+        vdd-supply: false
+
 additionalProperties: false
 
 examples:
@@ -232,4 +281,22 @@ examples:
             compatible = "google,cros-ec-rpmsg";
         };
     };
+
+  # Example for FPMCU
+  - |
+    spi0 {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
 ...