Merge tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following:

- Vivek updates the Linksys EA9500 DTS by adding the two additional
  switch port nodes (5 & 7), providing a flash partition layout to
  make the device usable with OpenWrt, and finally switches to using
  the pin controller rather than using mdio-mux to get the same outcome.

- Serge fixes the USB Device Tree nodes unit name to be conformant to
  the recommended name patterns.

- Rafal re-arranges all the nodes that belonged to the CRU block to be
  under the CRU node (such as PLLs). He also disables the USB3 PHY node
  for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150
  DTS.

- Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC
  DTSI.

- Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the
  Raspberry Pi 4 due to some cross-talk between the two blocks.

- Pavel updates the DWC2 USB controller RX FIFO sizes to be more
  accurate for all BCM283x (Raspberr Pi) SoCs.

- Florian updates all BCM5301x and NSP Device Tree files to allow
  switching the Broadcom B53 Ethernet switch device tree binding to YAML.

* tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
  dt-bindings: net: dsa: b53: Add YAML bindings
  ARM: dts: NSP: Provide defaults ports container node
  ARM: dts: NSP: Add a SRAB compatible string for each board
  ARM: dts: NSP: Fix Ethernet switch SGMII register name
  ARM: dts: NSP: Update ethernet switch node name
  ARM: dts: BCM5301X: Provide defaults ports container node
  ARM: dts: BCM5301X: Add a default compatible for switch node
  ARM: dts: BCM5301X: Update Ethernet switch node name
  dt-bindings: net: dsa: Document sfp and managed properties
  dt-bindings: net: dsa: Extend switch nodes pattern
  ARM: dts: bcm283x: increase dwc2's RX FIFO size
  ARM: dts: rpi-4: disable wifi frequencies
  ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.
  ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
  ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3
  ARM: dts: BCM5301X: Move CRU devices to the CRU node
  ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
  ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
  ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
  ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

34 files changed, 405 insertions, 283 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
deleted file mode 100644
index f1487a751b1a..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ /dev/null
@@ -1,149 +0,0 @@
-Broadcom BCM53xx Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of: "brcm,bcm5325"
-      "brcm,bcm53115"
-      "brcm,bcm53125"
-      "brcm,bcm53128"
-      "brcm,bcm5365"
-      "brcm,bcm5395"
-      "brcm,bcm5389"
-      "brcm,bcm5397"
-      "brcm,bcm5398"
-
-  For the BCM11360 SoC, must be:
-      "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
-
-  For the BCM5310x SoCs with an integrated switch, must be one of:
-      "brcm,bcm53010-srab"
-      "brcm,bcm53011-srab"
-      "brcm,bcm53012-srab"
-      "brcm,bcm53018-srab"
-      "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
-
-  For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
-      "brcm,bcm11404-srab"
-      "brcm,bcm11407-srab"
-      "brcm,bcm11409-srab"
-      "brcm,bcm58310-srab"
-      "brcm,bcm58311-srab"
-      "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
-
-  For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
-      "brcm,bcm58522-srab"
-      "brcm,bcm58523-srab"
-      "brcm,bcm58525-srab"
-      "brcm,bcm58622-srab"
-      "brcm,bcm58623-srab"
-      "brcm,bcm58625-srab"
-      "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
-
-  For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
-      "brcm,bcm3384-switch"
-      "brcm,bcm6328-switch"
-      "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
-
-Required properties for BCM585xx/586xx/88312 SoCs:
-
- - reg: a total of 3 register base addresses, the first one must be the
-   Switch Register Access block base, the second is the port 5/4 mux
-   configuration register and the third one is the SGMII configuration
-   and status register base address.
-
- - interrupts: a total of 13 interrupts must be specified, in the following
-   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
-   then the timestamping interrupt and the sleep timer interrupts for ports
-   5,7,8.
-
-Optional properties for BCM585xx/586xx/88312 SoCs:
-
-  - reg-names: a total of 3 names matching the 3 base register address, must
-    be in the following order:
-	"srab"
-	"mux_config"
-	"sgmii_config"
-
-  - interrupt-names: a total of 13 names matching the 13 interrupts specified
-    must be in the following order:
-	"link_state_p0"
-	"link_state_p1"
-	"link_state_p2"
-	"link_state_p3"
-	"link_state_p4"
-	"link_state_p5"
-	"link_state_p7"
-	"link_state_p8"
-	"phy"
-	"ts"
-	"imp_sleep_timer_p5"
-	"imp_sleep_timer_p7"
-	"imp_sleep_timer_p8"
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		compatible = "brcm,unimac";
-		reg = <0x10001000 0x1000>;
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	mdio0: mdio@10000000 {
-		compatible = "brcm,unimac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0: ethernet-switch@1e {
-			compatible = "brcm,bcm53125";
-			reg = <30>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port0@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-
-				port1@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-
-				port5@5 {
-					reg = <5>;
-					label = "cable-modem";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-					phy-mode = "rgmii-txid";
-				};
-
-				port8@8 {
-					reg = <8>;
-					label = "cpu";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-					phy-mode = "rgmii-txid";
-					ethernet = <&eth0>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
new file mode 100644
index 000000000000..c3c938893ad9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53xx Ethernet switches
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - Florian Fainelli <[email protected]>
+
+description:
+  Broadcom BCM53xx Ethernet switches
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm5325
+      - const: brcm,bcm53115
+      - const: brcm,bcm53125
+      - const: brcm,bcm53128
+      - const: brcm,bcm5365
+      - const: brcm,bcm5395
+      - const: brcm,bcm5389
+      - const: brcm,bcm5397
+      - const: brcm,bcm5398
+      - items:
+          - const: brcm,bcm11360-srab
+          - const: brcm,cygnus-srab
+      - items:
+          - enum:
+              - brcm,bcm53010-srab
+              - brcm,bcm53011-srab
+              - brcm,bcm53012-srab
+              - brcm,bcm53018-srab
+              - brcm,bcm53019-srab
+          - const: brcm,bcm5301x-srab
+      - items:
+          - enum:
+              - brcm,bcm11404-srab
+              - brcm,bcm11407-srab
+              - brcm,bcm11409-srab
+              - brcm,bcm58310-srab
+              - brcm,bcm58311-srab
+              - brcm,bcm58313-srab
+          - const: brcm,omega-srab
+      - items:
+          - enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+          - const: brcm,nsp-srab
+      - items:
+          - enum:
+              - brcm,bcm3384-switch
+              - brcm,bcm6328-switch
+              - brcm,bcm6368-switch
+          - const: brcm,bcm63xx-switch
+
+required:
+  - compatible
+  - reg
+
+# BCM585xx/586xx/88312 SoCs
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm58522-srab
+          - brcm,bcm58523-srab
+          - brcm,bcm58525-srab
+          - brcm,bcm58622-srab
+          - brcm,bcm58623-srab
+          - brcm,bcm58625-srab
+          - brcm,bcm88312-srab
+then:
+  properties:
+    reg:
+      minItems: 3
+      maxItems: 3
+    reg-names:
+      items:
+        - const: srab
+        - const: mux_config
+        - const: sgmii_config
+    interrupts:
+      minItems: 13
+      maxItems: 13
+    interrupt-names:
+      items:
+        - const: link_state_p0
+        - const: link_state_p1
+        - const: link_state_p2
+        - const: link_state_p3
+        - const: link_state_p4
+        - const: link_state_p5
+        - const: link_state_p7
+        - const: link_state_p8
+        - const: phy
+        - const: ts
+        - const: imp_sleep_timer_p5
+        - const: imp_sleep_timer_p7
+        - const: imp_sleep_timer_p8
+  required:
+    - interrupts
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@1e {
+            compatible = "brcm,bcm53125";
+            reg = <30>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "cable-modem";
+                    phy-mode = "rgmii-txid";
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+                    label = "cpu";
+                    phy-mode = "rgmii-txid";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    axi {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        switch@36000 {
+            compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+            reg = <0x36000 0x1000>,
+                  <0x3f308 0x8>,
+                  <0x3f410 0xc>;
+            reg-names = "srab", "mux_config", "sgmii_config";
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "link_state_p0",
+                              "link_state_p1",
+                              "link_state_p2",
+                              "link_state_p3",
+                              "link_state_p4",
+                              "link_state_p5",
+                              "link_state_p7",
+                              "link_state_p8",
+                              "phy",
+                              "ts",
+                              "imp_sleep_timer_p5",
+                              "imp_sleep_timer_p7",
+                              "imp_sleep_timer_p8";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    label = "port0";
+                    reg = <0>;
+                };
+
+                port@1 {
+                    label = "port1";
+                    reg = <1>;
+                };
+
+                port@2 {
+                    label = "port2";
+                    reg = <2>;
+                };
+
+                port@3 {
+                    label = "port3";
+                    reg = <3>;
+                };
+
+                port@4 {
+                    label = "port4";
+                    reg = <4>;
+                };
+
+                port@8 {
+                    ethernet = <&amac2>;
+                    label = "cpu";
+                    reg = <8>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index a765ceba28c6..8e044631bcf7 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -20,7 +20,7 @@ select: false
 
 properties:
   $nodename:
-    pattern: "^switch(@.*)?$"
+    pattern: "^(ethernet-)?switch(@.*)?$"
 
   dsa,member:
     minItems: 2
@@ -78,6 +78,10 @@ patternProperties:
 
           mac-address: true
 
+          sfp: true
+
+          managed: true
+
         required:
           - reg
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 3da6d8c154e4..ae78b54d4a4f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3377,7 +3377,7 @@ M:	Florian Fainelli <[email protected]>
 L:	[email protected]
 L:	[email protected] (subscribers-only)
 S:	Supported
-F:	Documentation/devicetree/bindings/net/dsa/b53.txt
+F:	Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
 F:	drivers/net/dsa/b53/*
 F:	include/linux/platform_data/b53.h
 
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index dacaef2c14ca..0025c88f660c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -591,7 +591,6 @@
 		adc: adc@180a6000 {
 			compatible = "brcm,iproc-static-adc";
 			#io-channel-cells = <1>;
-			io-channel-ranges;
 			adc-syscon = <&ts_adc_syscon>;
 			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
 			clock-names = "tsc_clk";
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index e895f7cb8c9f..b4d2cc70afb1 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -385,12 +385,12 @@
 			clock-names = "apb_pclk";
 		};
 
-		srab: srab@36000 {
+		srab: ethernet-switch@36000 {
 			compatible = "brcm,nsp-srab";
 			reg = <0x36000 0x1000>,
 			      <0x3f308 0x8>,
 			      <0x3f410 0xc>;
-			reg-names = "srab", "mux_config", "sgmii";
+			reg-names = "srab", "mux_config", "sgmii_config";
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
@@ -420,6 +420,10 @@
 			status = "disabled";
 
 			/* ports are defined in board DTS */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		i2c0: i2c@38000 {
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 09a1182c2936..403bacf986eb 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -181,12 +181,14 @@
 &hdmi0 {
 	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
 	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
 &hdmi1 {
 	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
 	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
index e2fd9610e125..20322de2f8bf 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "otg";
-	g-rx-fifo-size = <256>;
+	g-rx-fifo-size = <558>;
 	g-np-tx-fifo-size = <32>;
 	/*
 	 * According to dwc2 the sum of all device EP
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
index 0ff0e9e25327..1409d1b559c1 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "peripheral";
-	g-rx-fifo-size = <256>;
+	g-rx-fifo-size = <558>;
 	g-np-tx-fifo-size = <32>;
 	g-tx-fifo-size = <256 256 512 512 512 768 768>;
 };
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 810fc32f1895..5b4a481be4f4 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -57,17 +57,10 @@
 	status = "okay";
 };
 
-&usb3_phy {
-	status = "okay";
-};
-
 &srab {
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "poe";
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 7604b4480bb1..8636600385fd 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -64,17 +64,10 @@
 	status = "okay";
 };
 
-&usb3_phy {
-	status = "okay";
-};
-
 &srab {
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@4 {
 			reg = <4>;
 			label = "lan";
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index abd35a518046..51c64f0b2560 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -122,9 +122,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan4";
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 4dcec6865469..2f2d2b0a6893 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -117,7 +117,3 @@
 		};
 	};
 };
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index 1ec655809e57..68aaf0af3945 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -57,17 +57,10 @@
 	status = "okay";
 };
 
-&usb3_phy {
-	status = "okay";
-};
-
 &srab {
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@4 {
 			reg = <4>;
 			label = "poe";
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 04bfd58127fc..432254383769 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -105,17 +105,10 @@
 	status = "okay";
 };
 
-&usb3_phy {
-	status = "okay";
-};
-
 &srab {
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan4";
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 01c390ed48ea..12e34a0439b4 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -126,7 +126,3 @@
 &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index e1bb8661955f..cba3d910bed8 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -9,3 +9,7 @@
 	clock-frequency = <125000000>;
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 0faae8950375..3725f2b0d60b 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -123,33 +123,13 @@
 		};
 	};
 
-	mdio-bus-mux {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	mdio-bus-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
-		mdio_ext: mdio@200 {
+		mdio@200 {
 			reg = <0x200>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-		};
-	};
-
-	mdio-mii-mux {
-		compatible = "mdio-mux-mmioreg";
-		mdio-parent-bus = <&mdio_ext>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x1800c1c0 0x4>;
-
-		/* BIT(6) = mdc, BIT(7) = mdio */
-		mux-mask = <0xc0>;
-
-		mdio-mii@0 {
-			/* Enable MII function */
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			switch@0  {
 				compatible = "brcm,bcm53125";
@@ -159,6 +139,8 @@
 				reset-names = "robo_reset";
 				reg = <0>;
 				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
 
 				ports {
 					#address-cells = <1>;
@@ -219,9 +201,6 @@
 	dsa,member = <0 0>;
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@1 {
 			reg = <1>;
 			label = "lan7";
@@ -242,6 +221,30 @@
 			label = "wan";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
 		port@8 {
 			reg = <8>;
 			ethernet = <&gmac2>;
@@ -268,3 +271,44 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x0200000 0x01D00000>;
+			compatible = "brcm,trx";
+		};
+
+		partition@1F00000 {
+			label = "failsafe";
+			reg = <0x01F00000 0x01D00000>;
+			read-only;
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02E00000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index 068e384b8ab7..6fa101f0a90d 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -59,9 +59,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "poe";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 9ae815ddbb4b..4f8d777ae18d 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -57,9 +57,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index a21b2d185596..e17e9a17fb00 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -108,9 +108,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan4";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 4d5c5aa7dc42..60cc87ecc7ec 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -71,6 +71,10 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -79,9 +83,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan4";
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index cdc5ff593adb..2a8f7312d1be 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -8,6 +8,15 @@
 / {
 };
 
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
 &usb3_phy {
 	compatible = "brcm,ns-bx-usb3-phy";
 };
@@ -16,3 +25,7 @@
 	clock-frequency = <125000000>;
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ac3a99cf2079..7db72a2f1020 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -265,7 +265,7 @@
 
 			interrupt-parent = <&gic>;
 
-			ehci: ehci@21000 {
+			ehci: usb@21000 {
 				#usb-cells = <0>;
 
 				compatible = "generic-ehci";
@@ -287,7 +287,7 @@
 				};
 			};
 
-			ohci: ohci@22000 {
+			ohci: usb@22000 {
 				#usb-cells = <0>;
 
 				compatible = "generic-ohci";
@@ -318,7 +318,7 @@
 
 			interrupt-parent = <&gic>;
 
-			xhci: xhci@23000 {
+			xhci: usb@23000 {
 				#usb-cells = <0>;
 
 				compatible = "generic-xhci";
@@ -428,7 +428,27 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			pin-controller@1c0 {
+			lcpll0: lcpll0@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: genpll@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+
+			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
@@ -454,41 +474,26 @@
 					function = "uart1";
 				};
 			};
-		};
-	};
-
-	lcpll0: lcpll0@1800c100 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-lcpll0";
-		reg = <0x1800c100 0x14>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll0", "pcie_phy", "sdio",
-				     "ddr_phy";
-	};
 
-	genpll: genpll@1800c140 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-genpll";
-		reg = <0x1800c140 0x24>;
-		clocks = <&osc>;
-		clock-output-names = "genpll", "phy", "ethernetclk",
-				     "usbclk", "iprocfast", "sata1",
-				     "sata2";
-	};
-
-	thermal: thermal@1800c2c0 {
-		compatible = "brcm,ns-thermal";
-		reg = <0x1800c2c0 0x10>;
-		#thermal-sensor-cells = <0>;
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
 	};
 
-	srab: srab@18007000 {
-		compatible = "brcm,bcm5301x-srab";
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
 		reg = <0x18007000 0x1000>;
 
 		status = "disabled";
 
 		/* ports are defined in board DTS */
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 
 	rng: rng@18004000 {
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 4af8e3293cff..51546fccc616 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -135,7 +135,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ehci: ehci@4000 {
+			ehci: usb@4000 {
 				compatible = "generic-ehci";
 				reg = <0x4000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -155,7 +155,7 @@
 				};
 			};
 
-			ohci: ohci@d000 {
+			ohci: usb@d000 {
 				#usb-cells = <0>;
 
 				compatible = "generic-ohci";
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 957468224622..52feca0fb906 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -69,9 +69,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "port0";
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 7be4c4e628e0..5443fc079e6e 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -178,3 +178,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e58ed7e95346..e1e3c26cef19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -190,3 +190,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 21f922dc6019..f161ba2e7e5e 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -210,3 +210,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index a49c2fd21f4a..83cb877d63db 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -176,9 +176,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index dd6dff6452b8..4e106ce1384a 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -180,9 +180,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a71371b4065e..cda6cc281e18 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -195,9 +195,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 7782b61c51a1..ffbff0014c65 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -216,9 +216,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..3fd39c479a3c 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -184,9 +184,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;