diff options
| author | Linus Walleij <[email protected]> | 2023-04-12 14:21:13 +0200 |
|---|---|---|
| committer | Linus Walleij <[email protected]> | 2023-04-12 14:21:13 +0200 |
| commit | b67b3813ab0e7b010fbcf9c3f95131fa6a373c92 (patch) | |
| tree | d4763279361a5f54dbad95168b900449a7e2e47c | |
| parent | 86169e657aaa4fb619552394364573d797792b44 (diff) | |
| parent | 152674ab2e98bfd8677117314a77d223a2a1bedf (diff) | |
Merge tag 'qcom-pinctrl-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl Devicetree bindings changes for v6.4
Cleanup and improvement of the bindings to use "unevaluatedProperties"
instead of "additionalProperties", which allows to accept all the
properties already parsed by referenced common qcom,tlmm-common.yaml
schema.
That common qcom,tlmm-common.yaml binding is going to remove
"input-enable" property, thus using "unevaluatedProperties" allows such
change to propagate to other bindings automatically.
36 files changed, 36 insertions, 362 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml index 300747252a7b..3d3086ae1ba6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -56,6 +56,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -92,19 +93,9 @@ $defs: rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd, wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 28f1b6a07b70..7c3e5e043f07 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -43,6 +43,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -89,18 +90,9 @@ $defs: sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index 3137db927fc0..e053fbd588b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -92,19 +93,9 @@ $defs: qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, wci2b, wci2c, wci2d ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index 96b598bf9a76..2aedb7e7bc8b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -54,6 +54,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -105,19 +106,9 @@ $defs: uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml index c7c94d742ed2..5885aee95c98 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -51,6 +51,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -70,19 +71,9 @@ $defs: enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - output-high: true - output-low: true - input-enable: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 6cb667fa8665..9efb76509580 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -48,6 +48,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -71,19 +72,9 @@ $defs: blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, gp0_clk, gp1_clk, sdc3, wlan ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index 348d84c3cd21..a05971611780 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,20 +82,9 @@ $defs: sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ] - - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index 85082adc1811..5095e86fe9a2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -104,19 +105,9 @@ $defs: uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt, wcss_bt, wcss_fm, wcss_wlan ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 633c9e5ed49e..063d004967bb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -103,19 +104,9 @@ $defs: uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index ce219827ccc8..798aac9e6e31 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -45,6 +45,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -106,18 +107,9 @@ $defs: uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index cf386f644ccb..9172b50f7a98 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -97,19 +98,9 @@ $defs: vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c, wlan ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index afe4a80f0b79..8a3be65c51ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -93,14 +94,6 @@ $defs: tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins @@ -124,8 +117,6 @@ $defs: output-high: false output-low: false - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index 5dfcc3eadbb0..ca95de0b87a6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Desired pin configuration for a device or its specific state (like sleep or active). $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -93,19 +94,9 @@ $defs: wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index 0c4936fc35ef..41525ecfa8e3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -103,19 +104,9 @@ $defs: pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index 047b4584e3c0..59d406b60957 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -122,19 +123,9 @@ $defs: modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index c07ee9868046..bd6d7caf499a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -107,19 +108,9 @@ $defs: vsense_clkout, vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index 20bc967a17b5..b1b9cd319e50 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -59,6 +59,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -119,19 +120,9 @@ $defs: spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_en ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml index 7e5fb9a6e7d3..237cac4f6ce1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -93,19 +94,9 @@ $defs: usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1, vsense_trigger ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index 70d9106ad83d..e608a4f1bcae 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -58,6 +58,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -103,19 +104,9 @@ $defs: tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index f33792a1af6c..573e459b1c44 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -59,6 +59,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -100,19 +101,9 @@ $defs: _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 36502173cb79..368d44ff5468 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -110,20 +111,9 @@ $defs: uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index 0ace55c9868e..b086a5184235 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -102,19 +103,9 @@ $defs: usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger, wlan1_adc, wlan2_adc, wmss_reset ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index ea6bd0b44f56..508e0633b253 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -65,6 +65,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -122,19 +123,9 @@ $defs: vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml index f586b3aa138e..84a15f77e710 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -58,6 +58,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -94,20 +95,9 @@ $defs: uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ] - - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index 23d7c030fec0..d301881ddfa8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -61,6 +61,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -102,19 +103,9 @@ $defs: uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index a40175258495..67af99dd8f14 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -48,6 +48,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -91,18 +92,9 @@ $defs: uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, vsense_trigger ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 89c5562583d1..2ef793ae4038 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -47,6 +47,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -111,18 +112,9 @@ $defs: qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, gpio ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index 29325483cd2b..871df54f69a2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -85,18 +86,9 @@ $defs: uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, elan1_adc1 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index c9bc4893e8e8..8d77707b02b9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -61,6 +61,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -101,19 +102,9 @@ $defs: wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index d95935fcc8b5..27af379cf791 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -63,6 +63,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -108,20 +109,9 @@ $defs: uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, ] - - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index 66cef48ed59b..6e02ba24825f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -109,20 +110,9 @@ $defs: usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] - - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index 4376a9bd4d70..c5ffbea95957 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -60,6 +60,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -101,19 +102,9 @@ $defs: usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index cf561dff8893..021c54708524 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -58,6 +58,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -94,19 +95,9 @@ $defs: tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 797242f68b1c..6e8f41ff0a76 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -104,21 +105,9 @@ $defs: uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-disable: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 56c8046f1be0..5163fe3f5365 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -103,19 +104,9 @@ $defs: uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml index a457425ba112..f789c7753a92 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml @@ -54,6 +54,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -109,19 +110,9 @@ $defs: uim1_clk, uim1_data, uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg |