diff options
| author | Huang Shijie <[email protected]> | 2014-09-19 15:42:57 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <[email protected]> | 2014-09-28 21:26:38 -0400 |
| commit | a4688bcd34bd2f4fe7fb88856c85d3091270ab53 (patch) | |
| tree | 6e62880c92f034c22abe46c5a5e8d3cc5faf2c8e | |
| parent | 45564a6656b4944fa90aabd59f8ec082e8f7a969 (diff) | |
serial: imx: change the wait even to interruptiable
The wait_event() makes the application hang for ever in the following case:
[1] the hardware flow control is enabled.
[2] the other end (or the remote end) is terminated, and the TX is still
waiting for the hardware flow control signal to become asserted.
This patch fixes it by changing the wait_event to wait_event_interruptible.
Signed-off-by: Huang Shijie <[email protected]>
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
| -rw-r--r-- | drivers/tty/serial/imx.c | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index db749f768ac4..8f62a3cec23e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1219,9 +1219,18 @@ static void imx_shutdown(struct uart_port *port) unsigned long flags; if (sport->dma_is_enabled) { + int ret; + /* We have to wait for the DMA to finish. */ - wait_event(sport->dma_wait, + ret = wait_event_interruptible(sport->dma_wait, !sport->dma_is_rxing && !sport->dma_is_txing); + if (ret != 0) { + sport->dma_is_rxing = 0; + sport->dma_is_txing = 0; + dmaengine_terminate_all(sport->dma_chan_tx); + dmaengine_terminate_all(sport->dma_chan_rx); + } + imx_stop_tx(port); imx_stop_rx(port); imx_disable_dma(sport); imx_uart_dma_exit(sport); |