diff options
| author | John Stultz <[email protected]> | 2016-09-23 17:01:05 -0700 |
|---|---|---|
| committer | Andy Gross <[email protected]> | 2016-11-18 23:30:30 -0600 |
| commit | a3e6e13addee8335926e4e5ea4e8f5caf98e783c (patch) | |
| tree | 027a79a32bdb6b1f0a2bab837814799792c28dbf | |
| parent | f078eac68e8da3689385d96262caa10ca1ff0e0a (diff) | |
arm: dts: qcom: apq8064-nexus7: Add DSI and panel nodes
Add DSI and panel nodes to get graphics up and running
on the Nexus7.
This still depends on the panel driver being present
along with the rpmclk code.
Feedback would be greatly appreciated!
Cc: Archit Taneja <[email protected]>
Cc: vinay simha <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 63 |
1 files changed, 61 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index b72e09506448..4225652aa880 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -99,6 +99,7 @@ l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ @@ -133,13 +134,14 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; + regulator-always-on; }; /* pwm_power for backlight */ l17 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - bias-pull-down; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; /* camera, qdsp6 */ @@ -184,6 +186,63 @@ }; }; + mdp@5100000 { + status = "okay"; + ports { + port@1 { + mdp_dsi1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: mdss_dsi@4700000 { + status = "okay"; + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + vcss-supply = <&ext_3p3v>; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { + port@0 { + dsi0_in: endpoint { + remote-endpoint = <&mdp_dsi1_out>; + }; + }; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@4700200 { + status = "okay"; + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + }; + gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; |