Merge branch 'txgbe-link-modes'

Jiawen Wu says:

====================
support more link mode for TXGBE

There are three new interface mode support for Wangxun 10Gb NICs:
1000BASE-X, SGMII and XAUI.

Specific configurations are added to XPCS. And external PHY attaching
is added for copper NICs.

v2 -> v3:
- add device identifier read
- restrict pcs soft reset
- add firmware version warning

v1 -> v2:
- use the string "txgbe_pcs_mdio_bus" directly
- use dev_err() instead of pr_err()
- add device quirk flag
- add more macro definitions to explain PMA registers
- move txgbe_enable_sec_tx_path() to mac_finish()
- implement phylink for copper NICs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

14 files changed, 661 insertions, 95 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index dfc2ba0c20f3..5f527a9ae4b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22925,6 +22925,7 @@ S:	Maintained
 W:	https://www.net-swift.com
 F:	Documentation/networking/device_drivers/ethernet/wangxun/*
 F:	drivers/net/ethernet/wangxun/
+F:	drivers/net/pcs/pcs-xpcs-wx.c
 
 WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@linux-watchdog.org>
diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig
index 39596cd13539..23cd610bd376 100644
--- a/drivers/net/ethernet/wangxun/Kconfig
+++ b/drivers/net/ethernet/wangxun/Kconfig
@@ -41,6 +41,7 @@ config TXGBE
 	tristate "Wangxun(R) 10GbE PCI Express adapters support"
 	depends on PCI
 	depends on COMMON_CLK
+	select MARVELL_10G_PHY
 	select REGMAP
 	select I2C
 	select I2C_DESIGNWARE_PLATFORM
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index 1de88a33a698..c5cbd177ef62 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -205,6 +205,8 @@
 #define WX_TSC_CTL                   0x1D000
 #define WX_TSC_CTL_TX_DIS            BIT(1)
 #define WX_TSC_CTL_TSEC_DIS          BIT(0)
+#define WX_TSC_ST                    0x1D004
+#define WX_TSC_ST_SECTX_RDY          BIT(0)
 #define WX_TSC_BUF_AE                0x1D00C
 #define WX_TSC_BUF_AE_THR            GENMASK(9, 0)
 
@@ -231,6 +233,24 @@
 #define WX_MAC_WDG_TIMEOUT           0x1100C
 #define WX_MAC_RX_FLOW_CTRL          0x11090
 #define WX_MAC_RX_FLOW_CTRL_RFE      BIT(0) /* receive fc enable */
+/* MDIO Registers */
+#define WX_MSCA                      0x11200
+#define WX_MSCA_RA(v)                FIELD_PREP(U16_MAX, v)
+#define WX_MSCA_PA(v)                FIELD_PREP(GENMASK(20, 16), v)
+#define WX_MSCA_DA(v)                FIELD_PREP(GENMASK(25, 21), v)
+#define WX_MSCC                      0x11204
+#define WX_MSCC_CMD(v)               FIELD_PREP(GENMASK(17, 16), v)
+
+enum WX_MSCA_CMD_value {
+	WX_MSCA_CMD_RSV = 0,
+	WX_MSCA_CMD_WRITE,
+	WX_MSCA_CMD_POST_READ,
+	WX_MSCA_CMD_READ,
+};
+
+#define WX_MSCC_SADDR                BIT(18)
+#define WX_MSCC_BUSY                 BIT(22)
+#define WX_MDIO_CLK(v)               FIELD_PREP(GENMASK(21, 19), v)
 #define WX_MMC_CONTROL               0x11800
 #define WX_MMC_CONTROL_RSTONRD       BIT(2) /* reset on read */
 
@@ -580,6 +600,13 @@ enum wx_mac_type {
 	wx_mac_em
 };
 
+enum sp_media_type {
+	sp_media_unknown = 0,
+	sp_media_fiber,
+	sp_media_copper,
+	sp_media_backplane
+};
+
 enum em_mac_type {
 	em_mac_type_unknown = 0,
 	em_mac_type_mdi,
@@ -827,6 +854,7 @@ struct wx {
 	struct wx_bus_info bus;
 	struct wx_mac_info mac;
 	enum em_mac_type mac_type;
+	enum sp_media_type media_type;
 	struct wx_eeprom_info eeprom;
 	struct wx_addr_filter_info addr_ctrl;
 	struct wx_mac_addr *mac_table;
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
index fe20f02ecb3a..591f5b7b6da6 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
@@ -37,24 +37,24 @@ static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regn
 
 	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
 	/* setup and write the address cycle command */
-	command = NGBE_MSCA_RA(regnum) |
-		  NGBE_MSCA_PA(phy_addr) |
-		  NGBE_MSCA_DA(device_type);
-	wr32(wx, NGBE_MSCA, command);
-	command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
-		  NGBE_MSCC_BUSY |
-		  NGBE_MDIO_CLK(6);
-	wr32(wx, NGBE_MSCC, command);
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(device_type);
+	wr32(wx, WX_MSCA, command);
+	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+		  WX_MSCC_BUSY |
+		  WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
 
 	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-				100000, false, wx, NGBE_MSCC);
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
 	if (ret) {
 		wx_err(wx, "Mdio read c22 command did not complete.\n");
 		return ret;
 	}
 
-	return (u16)rd32(wx, NGBE_MSCC);
+	return (u16)rd32(wx, WX_MSCC);
 }
 
 static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
@@ -65,19 +65,19 @@ static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int reg
 
 	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
 	/* setup and write the address cycle command */
-	command = NGBE_MSCA_RA(regnum) |
-		  NGBE_MSCA_PA(phy_addr) |
-		  NGBE_MSCA_DA(device_type);
-	wr32(wx, NGBE_MSCA, command);
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(device_type);
+	wr32(wx, WX_MSCA, command);
 	command = value |
-		  NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
-		  NGBE_MSCC_BUSY |
-		  NGBE_MDIO_CLK(6);
-	wr32(wx, NGBE_MSCC, command);
+		  WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+		  WX_MSCC_BUSY |
+		  WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
 
 	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-				100000, false, wx, NGBE_MSCC);
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
 	if (ret)
 		wx_err(wx, "Mdio write c22 command did not complete.\n");
 
@@ -92,24 +92,24 @@ static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devn
 
 	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
 	/* setup and write the address cycle command */
-	command = NGBE_MSCA_RA(regnum) |
-		  NGBE_MSCA_PA(phy_addr) |
-		  NGBE_MSCA_DA(devnum);
-	wr32(wx, NGBE_MSCA, command);
-	command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
-		  NGBE_MSCC_BUSY |
-		  NGBE_MDIO_CLK(6);
-	wr32(wx, NGBE_MSCC, command);
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
+	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+		  WX_MSCC_BUSY |
+		  WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
 
 	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-				100000, false, wx, NGBE_MSCC);
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
 	if (ret) {
 		wx_err(wx, "Mdio read c45 command did not complete.\n");
 		return ret;
 	}
 
-	return (u16)rd32(wx, NGBE_MSCC);
+	return (u16)rd32(wx, WX_MSCC);
 }
 
 static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
@@ -121,19 +121,19 @@ static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
 
 	wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
 	/* setup and write the address cycle command */
-	command = NGBE_MSCA_RA(regnum) |
-		  NGBE_MSCA_PA(phy_addr) |
-		  NGBE_MSCA_DA(devnum);
-	wr32(wx, NGBE_MSCA, command);
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
 	command = value |
-		  NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
-		  NGBE_MSCC_BUSY |
-		  NGBE_MDIO_CLK(6);
-	wr32(wx, NGBE_MSCC, command);
+		  WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+		  WX_MSCC_BUSY |
+		  WX_MDIO_CLK(6);
+	wr32(wx, WX_MSCC, command);
 
 	/* wait to complete */
-	ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-				100000, false, wx, NGBE_MSCC);
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
 	if (ret)
 		wx_err(wx, "Mdio write c45 command did not complete.\n");
 
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index b70eca397b67..72c8cd2d5575 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -59,25 +59,6 @@
 #define NGBE_EEPROM_VERSION_L			0x1D
 #define NGBE_EEPROM_VERSION_H			0x1E
 
-/* mdio access */
-#define NGBE_MSCA				0x11200
-#define NGBE_MSCA_RA(v)				FIELD_PREP(U16_MAX, v)
-#define NGBE_MSCA_PA(v)				FIELD_PREP(GENMASK(20, 16), v)
-#define NGBE_MSCA_DA(v)				FIELD_PREP(GENMASK(25, 21), v)
-#define NGBE_MSCC				0x11204
-#define NGBE_MSCC_CMD(v)			FIELD_PREP(GENMASK(17, 16), v)
-
-enum NGBE_MSCA_CMD_value {
-	NGBE_MSCA_CMD_RSV = 0,
-	NGBE_MSCA_CMD_WRITE,
-	NGBE_MSCA_CMD_POST_READ,
-	NGBE_MSCA_CMD_READ,
-};
-
-#define NGBE_MSCC_SADDR				BIT(18)
-#define NGBE_MSCC_BUSY				BIT(22)
-#define NGBE_MDIO_CLK(v)			FIELD_PREP(GENMASK(21, 19), v)
-
 /* Media-dependent registers. */
 #define NGBE_MDIO_CLAUSE_SELECT			0x11220
 
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
index 6e130d1f7a7b..372745250270 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
@@ -14,6 +14,34 @@
 #include "txgbe_hw.h"
 
 /**
+ *  txgbe_disable_sec_tx_path - Stops the transmit data path
+ *  @wx: pointer to hardware structure
+ *
+ *  Stops the transmit data path and waits for the HW to internally empty
+ *  the tx security block
+ **/
+int txgbe_disable_sec_tx_path(struct wx *wx)
+{
+	int val;
+
+	wr32m(wx, WX_TSC_CTL, WX_TSC_CTL_TX_DIS, WX_TSC_CTL_TX_DIS);
+	return read_poll_timeout(rd32, val, val & WX_TSC_ST_SECTX_RDY,
+				 1000, 20000, false, wx, WX_TSC_ST);
+}
+
+/**
+ *  txgbe_enable_sec_tx_path - Enables the transmit data path
+ *  @wx: pointer to hardware structure
+ *
+ *  Enables the transmit data path.
+ **/
+void txgbe_enable_sec_tx_path(struct wx *wx)
+{
+	wr32m(wx, WX_TSC_CTL, WX_TSC_CTL_TX_DIS, 0);
+	WX_WRITE_FLUSH(wx);
+}
+
+/**
  *  txgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
  *  @wx: pointer to hardware structure
  *
@@ -257,17 +285,20 @@ static void txgbe_reset_misc(struct wx *wx)
 int txgbe_reset_hw(struct wx *wx)
 {
 	int status;
-	u32 val;
 
 	/* Call adapter stop to disable tx/rx and clear interrupts */
 	status = wx_stop_adapter(wx);
 	if (status != 0)
 		return status;
 
-	val = WX_MIS_RST_LAN_RST(wx->bus.func);
-	wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST));
-	WX_WRITE_FLUSH(wx);
-	usleep_range(10, 100);
+	if (wx->media_type != sp_media_copper) {
+		u32 val;
+
+		val = WX_MIS_RST_LAN_RST(wx->bus.func);
+		wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST));
+		WX_WRITE_FLUSH(wx);
+		usleep_range(10, 100);
+	}
 
 	status = wx_check_flash_load(wx, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wx->bus.func));
 	if (status != 0)
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
index e82f65dff8a6..abc729eb187a 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
@@ -4,6 +4,8 @@
 #ifndef _TXGBE_HW_H_
 #define _TXGBE_HW_H_
 
+int txgbe_disable_sec_tx_path(struct wx *wx);
+void txgbe_enable_sec_tx_path(struct wx *wx);
 int txgbe_read_pba_string(struct wx *wx, u8 *pba_num, u32 pba_num_size);
 int txgbe_validate_eeprom_checksum(struct wx *wx, u16 *checksum_val);
 int txgbe_reset_hw(struct wx *wx);
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 46eba6d6188b..5c3aed516ac2 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -301,6 +301,49 @@ static void txgbe_down(struct wx *wx)
 }
 
 /**
+ *  txgbe_init_type_code - Initialize the shared code
+ *  @wx: pointer to hardware structure
+ **/
+static void txgbe_init_type_code(struct wx *wx)
+{
+	u8 device_type = wx->subsystem_device_id & 0xF0;
+
+	switch (wx->device_id) {
+	case TXGBE_DEV_ID_SP1000:
+	case TXGBE_DEV_ID_WX1820:
+		wx->mac.type = wx_mac_sp;
+		break;
+	default:
+		wx->mac.type = wx_mac_unknown;
+		break;
+	}
+
+	switch (device_type) {
+	case TXGBE_ID_SFP:
+		wx->media_type = sp_media_fiber;
+		break;
+	case TXGBE_ID_XAUI:
+	case TXGBE_ID_SGMII:
+		wx->media_type = sp_media_copper;
+		break;
+	case TXGBE_ID_KR_KX_KX4:
+	case TXGBE_ID_MAC_XAUI:
+	case TXGBE_ID_MAC_SGMII:
+		wx->media_type = sp_media_backplane;
+		break;
+	case TXGBE_ID_SFI_XAUI:
+		if (wx->bus.func == 0)
+			wx->media_type = sp_media_fiber;
+		else
+			wx->media_type = sp_media_copper;
+		break;
+	default:
+		wx->media_type = sp_media_unknown;
+		break;
+	}
+}
+
+/**
  * txgbe_sw_init - Initialize general software structures (struct wx)
  * @wx: board private structure to initialize
  **/
@@ -324,15 +367,7 @@ static int txgbe_sw_init(struct wx *wx)
 		return err;
 	}
 
-	switch (wx->device_id) {
-	case TXGBE_DEV_ID_SP1000:
-	case TXGBE_DEV_ID_WX1820:
-		wx->mac.type = wx_mac_sp;
-		break;
-	default:
-		wx->mac.type = wx_mac_unknown;
-		break;
-	}
+	txgbe_init_type_code(wx);
 
 	/* Set common capability flags and settings */
 	wx->max_q_vectors = TXGBE_MAX_MSIX_VECTORS;
@@ -663,6 +698,9 @@ static int txgbe_probe(struct pci_dev *pdev,
 			 "0x%08x", etrack_id);
 	}
 
+	if (etrack_id < 0x20010)
+		dev_warn(&pdev->dev, "Please upgrade the firmware to 0x20010 or above.\n");
+
 	txgbe = devm_kzalloc(&pdev->dev, sizeof(*txgbe), GFP_KERNEL);
 	if (!txgbe) {
 		err = -ENOMEM;
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
index 819d1db34643..4159c84035fd 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
@@ -18,6 +18,7 @@
 #include "../libwx/wx_hw.h"
 #include "txgbe_type.h"
 #include "txgbe_phy.h"
+#include "txgbe_hw.h"
 
 static int txgbe_swnodes_register(struct txgbe *txgbe)
 {
@@ -160,7 +161,10 @@ static struct phylink_pcs *txgbe_phylink_mac_select(struct phylink_config *confi
 {
 	struct txgbe *txgbe = netdev_to_txgbe(to_net_dev(config->dev));
 
-	return &txgbe->xpcs->pcs;
+	if (interface == PHY_INTERFACE_MODE_10GBASER)
+		return &txgbe->xpcs->pcs;
+
+	return NULL;
 }
 
 static void txgbe_mac_config(struct phylink_config *config, unsigned int mode,
@@ -210,8 +214,32 @@ static void txgbe_mac_link_up(struct phylink_config *config,
 	wr32(wx, WX_MAC_WDG_TIMEOUT, wdg);
 }
 
+static int txgbe_mac_prepare(struct phylink_config *config, unsigned int mode,
+			     phy_interface_t interface)
+{
+	struct wx *wx = netdev_priv(to_net_dev(config->dev));
+
+	wr32m(wx, WX_MAC_TX_CFG, WX_MAC_TX_CFG_TE, 0);
+	wr32m(wx, WX_MAC_RX_CFG, WX_MAC_RX_CFG_RE, 0);
+
+	return txgbe_disable_sec_tx_path(wx);
+}
+
+static int txgbe_mac_finish(struct phylink_config *config, unsigned int mode,
+			    phy_interface_t interface)
+{
+	struct wx *wx = netdev_priv(to_net_dev(config->dev));
+
+	txgbe_enable_sec_tx_path(wx);
+	wr32m(wx, WX_MAC_RX_CFG, WX_MAC_RX_CFG_RE, WX_MAC_RX_CFG_RE);
+
+	return 0;
+}
+
 static const struct phylink_mac_ops txgbe_mac_ops = {
 	.mac_select_pcs = txgbe_phylink_mac_select,
+	.mac_prepare = txgbe_mac_prepare,
+	.mac_finish = txgbe_mac_finish,
 	.mac_config = txgbe_mac_config,
 	.mac_link_down = txgbe_mac_link_down,
 	.mac_link_up = txgbe_mac_link_up,
@@ -219,8 +247,8 @@ static const struct phylink_mac_ops txgbe_mac_ops = {
 
 static int txgbe_phylink_init(struct txgbe *txgbe)
 {
+	struct fwnode_handle *fwnode = NULL;
 	struct phylink_config *config;
-	struct fwnode_handle *fwnode;
 	struct wx *wx = txgbe->wx;
 	phy_interface_t phy_mode;
 	struct phylink *phylink;
@@ -231,14 +259,34 @@ static int txgbe_phylink_init(struct txgbe *txgbe)
 
 	config->dev = &wx->netdev->dev;
 	config->type = PHYLINK_NETDEV;
-	config->mac_capabilities = MAC_10000FD | MAC_1000FD | MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
-	phy_mode = PHY_INTERFACE_MODE_10GBASER;
-	__set_bit(PHY_INTERFACE_MODE_10GBASER, config->supported_interfaces);
-	fwnode = software_node_fwnode(txgbe->nodes.group[SWNODE_PHYLINK]);
+	config->mac_capabilities = MAC_10000FD | MAC_1000FD | MAC_100FD |
+				   MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
+
+	if (wx->media_type == sp_media_copper) {
+		phy_mode = PHY_INTERFACE_MODE_XAUI;
+		__set_bit(PHY_INTERFACE_MODE_XAUI, config->supported_interfaces);
+	} else {
+		phy_mode = PHY_INTERFACE_MODE_10GBASER;
+		fwnode = software_node_fwnode(txgbe->nodes.group[SWNODE_PHYLINK]);
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces);
+	}
+
 	phylink = phylink_create(config, fwnode, phy_mode, &txgbe_mac_ops);
 	if (IS_ERR(phylink))
 		return PTR_ERR(phylink);
 
+	if (wx->phydev) {
+		int ret;
+
+		ret = phylink_connect_phy(phylink, wx->phydev);
+		if (ret) {
+			phylink_destroy(phylink);
+			return ret;
+		}
+	}
+
 	txgbe->phylink = phylink;
 
 	return 0;
@@ -431,7 +479,8 @@ static void txgbe_irq_handler(struct irq_desc *desc)
 
 	chained_irq_exit(chip, desc);
 
-	if (eicr & (TXGBE_PX_MISC_ETH_LK | TXGBE_PX_MISC_ETH_LKDN)) {
+	if (eicr & (TXGBE_PX_MISC_ETH_LK | TXGBE_PX_MISC_ETH_LKDN |
+		    TXGBE_PX_MISC_ETH_AN)) {
 		u32 reg = rd32(wx, TXGBE_CFG_PORT_ST);
 
 		phylink_mac_change(txgbe->phylink, !!(reg & TXGBE_CFG_PORT_ST_LINK_UP));
@@ -598,10 +647,117 @@ static int txgbe_sfp_register(struct txgbe *txgbe)
 	return 0;
 }
 
+static int txgbe_phy_read(struct mii_bus *bus, int phy_addr,
+			  int devnum, int regnum)
+{
+	struct wx *wx = bus->priv;
+	u32 val, command;
+	int ret;
+
+	/* setup and write the address cycle command */
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
+
+	command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | WX_MSCC_BUSY;
+	wr32(wx, WX_MSCC, command);
+
+	/* wait to complete */
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
+	if (ret) {
+		wx_err(wx, "Mdio read c45 command did not complete.\n");
+		return ret;
+	}
+
+	return (u16)rd32(wx, WX_MSCC);
+}
+
+static int txgbe_phy_write(struct mii_bus *bus, int phy_addr,
+			   int devnum, int regnum, u16 value)
+{
+	struct wx *wx = bus->priv;
+	int ret, command;
+	u16 val;
+
+	/* setup and write the address cycle command */
+	command = WX_MSCA_RA(regnum) |
+		  WX_MSCA_PA(phy_addr) |
+		  WX_MSCA_DA(devnum);
+	wr32(wx, WX_MSCA, command);
+
+	command = value | WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | WX_MSCC_BUSY;
+	wr32(wx, WX_MSCC, command);
+
+	/* wait to complete */
+	ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+				100000, false, wx, WX_MSCC);
+	if (ret)
+		wx_err(wx, "Mdio write c45 command did not complete.\n");
+
+	return ret;
+}
+
+static int txgbe_ext_phy_init(struct txgbe *txgbe)
+{
+	struct phy_device *phydev;
+	struct mii_bus *mii_bus;
+	struct pci_dev *pdev;
+	struct wx *wx;
+	int ret = 0;
+
+	wx = txgbe->wx;
+	pdev = wx->pdev;
+
+	mii_bus = devm_mdiobus_alloc(&pdev->dev);
+	if (!mii_bus)
+		return -ENOMEM;
+
+	mii_bus->name = "txgbe_mii_bus";
+	mii_bus->read_c45 = &txgbe_phy_read;
+	mii_bus->write_c45 = &txgbe_phy_write;
+	mii_bus->parent = &pdev->dev;
+	mii_bus->phy_mask = GENMASK(31, 1);
+	mii_bus->priv = wx;
+	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "txgbe-%x",
+		 (pdev->bus->number << 8) | pdev->devfn);
+
+	ret = devm_mdiobus_register(&pdev->dev, mii_bus);
+	if (ret) {
+		wx_err(wx, "failed to register MDIO bus: %d\n", ret);
+		return ret;
+	}
+
+	phydev = phy_find_first(mii_bus);
+	if (!phydev) {
+		wx_err(wx, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	phy_attached_info(phydev);
+
+	wx->link = 0;
+	wx->speed = 0;
+	wx->duplex = 0;
+	wx->phydev = phydev;
+
+	ret = txgbe_phylink_init(txgbe);
+	if (ret) {
+		wx_err(wx, "failed to init phylink: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 int txgbe_init_phy(struct txgbe *txgbe)
 {
 	int ret;
 
+	if (txgbe->wx->media_type == sp_media_copper)
+		return txgbe_ext_phy_init(txgbe);
+
 	ret = txgbe_swnodes_register(txgbe);
 	if (ret) {
 		wx_err(txgbe->wx, "failed to register software nodes\n");
@@ -663,6 +819,12 @@ err_unregister_swnode:
 
 void txgbe_remove_phy(struct txgbe *txgbe)
 {
+	if (txgbe->wx->media_type == sp_media_copper) {
+		phylink_disconnect_phy(txgbe->phylink);
+		phylink_destroy(txgbe->phylink);
+		return;
+	}
+
 	platform_device_unregister(txgbe->sfp_dev);
 	platform_device_unregister(txgbe->i2c_dev);
 	clkdev_drop(txgbe->clock);
diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile
index ea662a7989b2..fb1694192ae6 100644
--- a/drivers/net/pcs/Makefile
+++ b/drivers/net/pcs/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for Linux PCS drivers
 
-pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-nxp.o
+pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-nxp.o pcs-xpcs-wx.o
 
 obj-$(CONFIG_PCS_XPCS)		+= pcs_xpcs.o
 obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
diff --git a/drivers/net/pcs/pcs-xpcs-wx.c b/drivers/net/pcs/pcs-xpcs-wx.c
new file mode 100644
index 000000000000..19c75886f070
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs-wx.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/pcs/pcs-xpcs.h>
+#include <linux/mdio.h>
+#include "pcs-xpcs.h"
+
+/* VR_XS_PMA_MMD */
+#define TXGBE_PMA_MMD			0x8020
+#define TXGBE_TX_GENCTL1		0x11
+#define TXGBE_TX_GENCTL1_VBOOST_LVL	GENMASK(10, 8)
+#define TXGBE_TX_GENCTL1_VBOOST_EN0	BIT(4)
+#define TXGBE_TX_GEN_CTL2		0x12
+#define TXGBE_TX_GEN_CTL2_TX0_WIDTH(v)	FIELD_PREP(GENMASK(9, 8), v)
+#define TXGBE_TX_RATE_CTL		0x14
+#define TXGBE_TX_RATE_CTL_TX0_RATE(v)	FIELD_PREP(GENMASK(2, 0), v)
+#define TXGBE_RX_GEN_CTL2		0x32
+#define TXGBE_RX_GEN_CTL2_RX0_WIDTH(v)	FIELD_PREP(GENMASK(9, 8), v)
+#define TXGBE_RX_GEN_CTL3		0x33
+#define TXGBE_RX_GEN_CTL3_LOS_TRSHLD0	GENMASK(2, 0)
+#define TXGBE_RX_RATE_CTL		0x34
+#define TXGBE_RX_RATE_CTL_RX0_RATE(v)	FIELD_PREP(GENMASK(1, 0), v)
+#define TXGBE_RX_EQ_ATTN_CTL		0x37
+#define TXGBE_RX_EQ_ATTN_LVL0		GENMASK(2, 0)
+#define TXGBE_RX_EQ_CTL0		0x38
+#define TXGBE_RX_EQ_CTL0_VGA1_GAIN(v)	FIELD_PREP(GENMASK(15, 12), v)
+#define TXGBE_RX_EQ_CTL0_VGA2_GAIN(v)	FIELD_PREP(GENMASK(11, 8), v)
+#define TXGBE_RX_EQ_CTL0_CTLE_POLE(v)	FIELD_PREP(GENMASK(7, 5), v)
+#define TXGBE_RX_EQ_CTL0_CTLE_BOOST(v)	FIELD_PREP(GENMASK(4, 0), v)
+#define TXGBE_RX_EQ_CTL4		0x3C
+#define TXGBE_RX_EQ_CTL4_CONT_OFF_CAN0	BIT(4)
+#define TXGBE_RX_EQ_CTL4_CONT_ADAPT0	BIT(0)
+#define TXGBE_AFE_DFE_ENABLE		0x3D
+#define TXGBE_DFE_EN_0			BIT(4)
+#define TXGBE_AFE_EN_0			BIT(0)
+#define TXGBE_DFE_TAP_CTL0		0x3E
+#define TXGBE_MPLLA_CTL0		0x51
+#define TXGBE_MPLLA_CTL2		0x53
+#define TXGBE_MPLLA_CTL2_DIV16P5_CLK_EN	BIT(10)
+#define TXGBE_MPLLA_CTL2_DIV10_CLK_EN	BIT(9)
+#define TXGBE_MPLLA_CTL3		0x57
+#define TXGBE_MISC_CTL0			0x70
+#define TXGBE_MISC_CTL0_PLL		BIT(15)
+#define TXGBE_MISC_CTL0_CR_PARA_SEL	BIT(14)
+#define TXGBE_MISC_CTL0_RX_VREF(v)	FIELD_PREP(GENMASK(12, 8), v)
+#define TXGBE_VCO_CAL_LD0		0x72
+#define TXGBE_VCO_CAL_REF0		0x76
+
+static int txgbe_read_pma(struct dw_xpcs *xpcs, int reg)
+{
+	return xpcs_read(xpcs, MDIO_MMD_PMAPMD, TXGBE_PMA_MMD + reg);
+}
+
+static int txgbe_write_pma(struct dw_xpcs *xpcs, int reg, u16 val)
+{
+	return xpcs_write(xpcs, MDIO_MMD_PMAPMD, TXGBE_PMA_MMD + reg, val);
+}
+
+static void txgbe_pma_config_10gbaser(struct dw_xpcs *xpcs)
+{
+	int val;
+
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL0, 0x21);
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL3, 0);
+	val = txgbe_read_pma(xpcs, TXGBE_TX_GENCTL1);
+	val = u16_replace_bits(val, 0x5, TXGBE_TX_GENCTL1_VBOOST_LVL);
+	txgbe_write_pma(xpcs, TXGBE_TX_GENCTL1, val);
+	txgbe_write_pma(xpcs, TXGBE_MISC_CTL0, TXGBE_MISC_CTL0_PLL |
+			TXGBE_MISC_CTL0_CR_PARA_SEL | TXGBE_MISC_CTL0_RX_VREF(0xF));
+	txgbe_write_pma(xpcs, TXGBE_VCO_CAL_LD0, 0x549);
+	txgbe_write_pma(xpcs, TXGBE_VCO_CAL_REF0, 0x29);
+	txgbe_write_pma(xpcs, TXGBE_TX_RATE_CTL, 0);
+	txgbe_write_pma(xpcs, TXGBE_RX_RATE_CTL, 0);
+	txgbe_write_pma(xpcs, TXGBE_TX_GEN_CTL2, TXGBE_TX_GEN_CTL2_TX0_WIDTH(3));
+	txgbe_write_pma(xpcs, TXGBE_RX_GEN_CTL2, TXGBE_RX_GEN_CTL2_RX0_WIDTH(3));
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL2, TXGBE_MPLLA_CTL2_DIV16P5_CLK_EN |
+			TXGBE_MPLLA_CTL2_DIV10_CLK_EN);
+
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_CTL0, TXGBE_RX_EQ_CTL0_CTLE_POLE(2) |
+			TXGBE_RX_EQ_CTL0_CTLE_BOOST(5));
+	val = txgbe_read_pma(xpcs, TXGBE_RX_EQ_ATTN_CTL);
+	val &= ~TXGBE_RX_EQ_ATTN_LVL0;
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_ATTN_CTL, val);
+	txgbe_write_pma(xpcs, TXGBE_DFE_TAP_CTL0, 0xBE);
+	val = txgbe_read_pma(xpcs, TXGBE_AFE_DFE_ENABLE);
+	val &= ~(TXGBE_DFE_EN_0 | TXGBE_AFE_EN_0);
+	txgbe_write_pma(xpcs, TXGBE_AFE_DFE_ENABLE, val);
+	val = txgbe_read_pma(xpcs, TXGBE_RX_EQ_CTL4);
+	val &= ~TXGBE_RX_EQ_CTL4_CONT_ADAPT0;
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_CTL4, val);
+}
+
+static void txgbe_pma_config_1g(struct dw_xpcs *xpcs)
+{
+	int val;
+
+	val = txgbe_read_pma(xpcs, TXGBE_TX_GENCTL1);
+	val = u16_replace_bits(val, 0x5, TXGBE_TX_GENCTL1_VBOOST_LVL);
+	val &= ~TXGBE_TX_GENCTL1_VBOOST_EN0;
+	txgbe_write_pma(xpcs, TXGBE_TX_GENCTL1, val);
+	txgbe_write_pma(xpcs, TXGBE_MISC_CTL0, TXGBE_MISC_CTL0_PLL |
+			TXGBE_MISC_CTL0_CR_PARA_SEL | TXGBE_MISC_CTL0_RX_VREF(0xF));
+
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_CTL0, TXGBE_RX_EQ_CTL0_VGA1_GAIN(7) |
+			TXGBE_RX_EQ_CTL0_VGA2_GAIN(7) | TXGBE_RX_EQ_CTL0_CTLE_BOOST(6));
+	val = txgbe_read_pma(xpcs, TXGBE_RX_EQ_ATTN_CTL);
+	val &= ~TXGBE_RX_EQ_ATTN_LVL0;
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_ATTN_CTL, val);
+	txgbe_write_pma(xpcs, TXGBE_DFE_TAP_CTL0, 0);
+	val = txgbe_read_pma(xpcs, TXGBE_RX_GEN_CTL3);
+	val = u16_replace_bits(val, 0x4, TXGBE_RX_GEN_CTL3_LOS_TRSHLD0);
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_ATTN_CTL, val);
+
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL0, 0x20);
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL3, 0x46);
+	txgbe_write_pma(xpcs, TXGBE_VCO_CAL_LD0, 0x540);
+	txgbe_write_pma(xpcs, TXGBE_VCO_CAL_REF0, 0x2A);
+	txgbe_write_pma(xpcs, TXGBE_AFE_DFE_ENABLE, 0);
+	txgbe_write_pma(xpcs, TXGBE_RX_EQ_CTL4, TXGBE_RX_EQ_CTL4_CONT_OFF_CAN0);
+	txgbe_write_pma(xpcs, TXGBE_TX_RATE_CTL, TXGBE_TX_RATE_CTL_TX0_RATE(3));
+	txgbe_write_pma(xpcs, TXGBE_RX_RATE_CTL, TXGBE_RX_RATE_CTL_RX0_RATE(3));
+	txgbe_write_pma(xpcs, TXGBE_TX_GEN_CTL2, TXGBE_TX_GEN_CTL2_TX0_WIDTH(1));
+	txgbe_write_pma(xpcs, TXGBE_RX_GEN_CTL2, TXGBE_RX_GEN_CTL2_RX0_WIDTH(1));
+	txgbe_write_pma(xpcs, TXGBE_MPLLA_CTL2, TXGBE_MPLLA_CTL2_DIV10_CLK_EN);
+}
+
+static int txgbe_pcs_poll_power_up(struct dw_xpcs *xpcs)
+{
+	int val, ret;
+
+	/* Wait xpcs power-up good */
+	ret = read_poll_timeout(xpcs_read_vpcs, val,
+				(val & DW_PSEQ_ST) == DW_PSEQ_ST_GOOD,
+				10000, 1000000, false,
+				xpcs, DW_VR_XS_PCS_DIG_STS);
+	if (ret < 0)
+		dev_err(&xpcs->mdiodev->dev, "xpcs power-up timeout\n");
+
+	return ret;
+}
+
+static int txgbe_pma_init_done(struct dw_xpcs *xpcs)
+{
+	int val, ret;
+
+	xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_VR_RST | DW_EN_VSMMD1);
+
+	/* wait pma initialization done */
+	ret = read_poll_timeout(xpcs_read_vpcs, val, !(val & DW_VR_RST),
+				100000, 10000000, false,
+				xpcs, DW_VR_XS_PCS_DIG_CTRL1);
+	if (ret < 0)
+		dev_err(&xpcs->mdiodev->dev, "xpcs pma initialization timeout\n");
+
+	return ret;
+}
+
+static bool txgbe_xpcs_mode_quirk(struct dw_xpcs *xpcs)
+{
+	int ret;
+
+	/* When txgbe do LAN reset, PCS will change to default 10GBASE-R mode */
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_CTRL2);
+	ret &= MDIO_PCS_CTRL2_TYPE;
+	if ((ret == MDIO_PCS_CTRL2_10GBR &&
+	     xpcs->interface != PHY_INTERFACE_MODE_10GBASER) ||
+	    xpcs->interface == PHY_INTERFACE_MODE_SGMII)
+		return true;
+
+	return false;
+}
+
+int txgbe_xpcs_switch_mode(struct dw_xpcs *xpcs, phy_interface_t interface)
+{
+	int val, ret;
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		break;
+	default:
+		return 0;
+	}
+
+	if (xpcs->interface == interface && !txgbe_xpcs_mode_quirk(xpcs))
+		return 0;
+
+	xpcs->interface = interface;
+
+	ret = txgbe_pcs_poll_power_up(xpcs);
+	if (ret < 0)
+		return ret;
+
+	if (interface == PHY_INTERFACE_MODE_10GBASER) {
+		xpcs_write(xpcs, MDIO_MMD_PCS, MDIO_CTRL2, MDIO_PCS_CTRL2_10GBR);
+		val = xpcs_read(xpcs, MDIO_MMD_PMAPMD, MDIO_CTRL1);
+		val |= MDIO_CTRL1_SPEED10G;
+		xpcs_write(xpcs, MDIO_MMD_PMAPMD, MDIO_CTRL1, val);
+		txgbe_pma_config_10gbaser(xpcs);
+	} else {
+		xpcs_write(xpcs, MDIO_MMD_PCS, MDIO_CTRL2, MDIO_PCS_CTRL2_10GBX);
+		xpcs_write(xpcs, MDIO_MMD_PMAPMD, MDIO_CTRL1, 0);
+		xpcs_write(xpcs, MDIO_MMD_PCS, MDIO_CTRL1, 0);
+		txgbe_pma_config_1g(xpcs);
+	}
+
+	return txgbe_pma_init_done(xpcs);
+}
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 44b037646865..4dbc21f604f2 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -228,16 +228,39 @@ static int xpcs_write_vendor(struct dw_xpcs *xpcs, int dev, int reg,
 	return xpcs_write(xpcs, dev, DW_VENDOR | reg, val);
 }
 
-static int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg)
+int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg)
 {
 	return xpcs_read_vendor(xpcs, MDIO_MMD_PCS, reg);
 }
 
-static int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val)
+int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val)
 {
 	return xpcs_write_vendor(xpcs, MDIO_MMD_PCS, reg, val);
 }
 
+static int xpcs_dev_flag(struct dw_xpcs *xpcs)
+{
+	int ret, oui;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PMAPMD, MDIO_DEVID1);
+	if (ret < 0)
+		return ret;
+
+	oui = ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PMAPMD, MDIO_DEVID2);
+	if (ret < 0)
+		return ret;
+
+	ret = (ret >> 10) & 0x3F;
+	oui |= ret << 16;
+
+	if (oui == DW_OUI_WX)
+		xpcs->dev_flag = DW_DEV_TXGBE;
+
+	return 0;
+}
+
 static int xpcs_poll_reset(struct dw_xpcs *xpcs, int dev)
 {
 	/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
@@ -660,7 +683,10 @@ EXPORT_SYMBOL_GPL(xpcs_config_eee);
 static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 				      unsigned int neg_mode)
 {
-	int ret, mdio_ctrl;
+	int ret, mdio_ctrl, tx_conf;
+
+	if (xpcs->dev_flag == DW_DEV_TXGBE)
+		xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_CL37_BP | DW_EN_VSMMD1);
 
 	/* For AN for C37 SGMII mode, the settings are :-
 	 * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
@@ -697,9 +723,15 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	ret |= (DW_VR_MII_PCS_MODE_C37_SGMII <<
 		DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT &
 		DW_VR_MII_PCS_MODE_MASK);
-	ret |= (DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII <<
-		DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT &
-		DW_VR_MII_TX_CONFIG_MASK);
+	if (xpcs->dev_flag == DW_DEV_TXGBE) {
+		ret |= DW_VR_MII_AN_CTRL_8BIT;
+		/* Hardware requires it to be PHY side SGMII */
+		tx_conf = DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII;
+	} else {
+		tx_conf = DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII;
+	}
+	ret |= tx_conf << DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT &
+		DW_VR_MII_TX_CONFIG_MASK;
 	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
 	if (ret < 0)
 		return ret;
@@ -713,6 +745,9 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	else
 		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
 
+	if (xpcs->dev_flag == DW_DEV_TXGBE)
+		ret |= DW_VR_MII_DIG_CTRL1_PHY_MODE_CTRL;
+
 	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
 	if (ret < 0)
 		return ret;
@@ -732,6 +767,9 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 	int ret, mdio_ctrl, adv;
 	bool changed = 0;
 
+	if (xpcs->dev_flag == DW_DEV_TXGBE)
+		xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_CL37_BP | DW_EN_VSMMD1);
+
 	/* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must
 	 * be disabled first:-
 	 * 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b
@@ -753,6 +791,8 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 		return ret;
 
 	ret &= ~DW_VR_MII_PCS_MODE_MASK;
+	if (!xpcs->pcs.poll)
+		ret |= DW_VR_MII_AN_INTR_EN;
 	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
 	if (ret < 0)
 		return ret;
@@ -818,6 +858,12 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
 	if (!compat)
 		return -ENODEV;
 
+	if (xpcs->dev_flag == DW_DEV_TXGBE) {
+		ret = txgbe_xpcs_switch_mode(xpcs, interface);
+		if (ret)
+			return ret;
+	}
+
 	switch (compat->an_mode) {
 	case DW_10GBASER:
 		break;
@@ -977,6 +1023,33 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 			state->duplex = DUPLEX_FULL;
 		else
 			state->duplex = DUPLEX_HALF;
+	} else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+		int speed, duplex;
+
+		state->link = true;
+
+		speed = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+		if (speed < 0)
+			return speed;
+
+		speed &= SGMII_SPEED_SS13 | SGMII_SPEED_SS6;
+		if (speed == SGMII_SPEED_SS6)
+			state->speed = SPEED_1000;
+		else if (speed == SGMII_SPEED_SS13)
+			state->speed = SPEED_100;
+		else if (speed == 0)
+			state->speed = SPEED_10;
+
+		duplex = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
+		if (duplex < 0)
+			return duplex;
+
+		if (duplex & DW_FULL_DUPLEX)
+			state->duplex = DUPLEX_FULL;
+		else if (duplex & DW_HALF_DUPLEX)
+			state->duplex = DUPLEX_HALF;
+
+		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
 	}
 
 	return 0;
@@ -1000,6 +1073,17 @@ static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
 		if (bmsr < 0)
 			return bmsr;
 
+		/* Clear AN complete interrupt */
+		if (!xpcs->pcs.poll) {
+			int an_intr;
+
+			an_intr = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS);
+			if (an_intr & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+				an_intr &= ~DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+				xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, an_intr);
+			}
+		}
+
 		phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
 	}
 
@@ -1284,16 +1368,20 @@ static struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
 			goto out;
 		}
 
+		ret = xpcs_dev_flag(xpcs);
+		if (ret)
+			goto out;
+
 		xpcs->pcs.ops = &xpcs_phylink_ops;
 		xpcs->pcs.neg_mode = true;
-		if (compat->an_mode == DW_10GBASER)
-			return xpcs;
 
-		xpcs->pcs.poll = true;
+		if (xpcs->dev_flag != DW_DEV_TXGBE) {
+			xpcs->pcs.poll = true;
 
-		ret = xpcs_soft_reset(xpcs, compat);
-		if (ret)
-			goto out;
+			ret = xpcs_soft_reset(xpcs, compat);
+			if (ret)
+				goto out;
+		}
 
 		return xpcs;
 	}
diff --git a/drivers/net/pcs/pcs-xpcs.h b/drivers/net/pcs/pcs-xpcs.h
index 68c6b5a62088..39a90417e535 100644
--- a/drivers/net/pcs/pcs-xpcs.h
+++ b/drivers/net/pcs/pcs-xpcs.h
@@ -15,8 +15,14 @@
 /* VR_XS_PCS */
 #define DW_USXGMII_RST			BIT(10)
 #define DW_USXGMII_EN			BIT(9)
+#define DW_VR_XS_PCS_DIG_CTRL1		0x0000
+#define DW_VR_RST			BIT(15)
+#define DW_EN_VSMMD1			BIT(13)
+#define DW_CL37_BP			BIT(12)
 #define DW_VR_XS_PCS_DIG_STS		0x0010
 #define DW_RXFIFO_ERR			GENMASK(6, 5)
+#define DW_PSEQ_ST			GENMASK(4, 2)
+#define DW_PSEQ_ST_GOOD			FIELD_PREP(GENMASK(4, 2), 0x4)
 
 /* SR_MII */
 #define DW_USXGMII_FULL			BIT(8)
@@ -61,12 +67,14 @@
 
 /* VR_MII_DIG_CTRL1 */
 #define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW		BIT(9)
+#define DW_VR_MII_DIG_CTRL1_PHY_MODE_CTRL	BIT(0)
 
 /* VR_MII_DIG_CTRL2 */
 #define DW_VR_MII_DIG_CTRL2_TX_POL_INV		BIT(4)
 #define DW_VR_MII_DIG_CTRL2_RX_POL_INV		BIT(0)
 
 /* VR_MII_AN_CTRL */
+#define DW_VR_MII_AN_CTRL_8BIT			BIT(8)
 #define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT	3
 #define DW_VR_MII_TX_CONFIG_MASK		BIT(3)
 #define DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII	0x1
@@ -75,8 +83,10 @@
 #define DW_VR_MII_PCS_MODE_MASK			GENMASK(2, 1)
 #define DW_VR_MII_PCS_MODE_C37_1000BASEX	0x0
 #define DW_VR_MII_PCS_MODE_C37_SGMII		0x2
+#define DW_VR_MII_AN_INTR_EN			BIT(0)
 
 /* VR_MII_AN_INTR_STS */
+#define DW_VR_MII_AN_STS_C37_ANCMPLT_INTR	BIT(0)
 #define DW_VR_MII_AN_STS_C37_ANSGM_FD		BIT(1)
 #define DW_VR_MII_AN_STS_C37_ANSGM_SP_SHIFT	2
 #define DW_VR_MII_AN_STS_C37_ANSGM_SP		GENMASK(3, 2)
@@ -90,6 +100,10 @@
 #define SGMII_SPEED_SS13		BIT(13)	/* SGMII speed along with SS6 */
 #define SGMII_SPEED_SS6			BIT(6)	/* SGMII speed along with SS13 */
 
+/* SR MII MMD AN Advertisement defines */
+#define DW_HALF_DUPLEX			BIT(6)
+#define DW_FULL_DUPLEX			BIT(5)
+
 /* VR MII EEE Control 0 defines */
 #define DW_VR_MII_EEE_LTX_EN			BIT(0)  /* LPI Tx Enable */
 #define DW_VR_MII_EEE_LRX_EN			BIT(1)  /* LPI Rx Enable */
@@ -106,6 +120,9 @@
 
 int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg);
 int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val);
+int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg);
+int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val);
 int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs);
 int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs);
 int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs);
+int txgbe_xpcs_switch_mode(struct dw_xpcs *xpcs, phy_interface_t interface);
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index ff99cf7a5d0d..da3a6c30f6d2 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -20,12 +20,20 @@
 #define DW_AN_C37_1000BASEX		4
 #define DW_10GBASER			5
 
+/* device vendor OUI */
+#define DW_OUI_WX			0x0018fc80
+
+/* dev_flag */
+#define DW_DEV_TXGBE			BIT(0)
+
 struct xpcs_id;
 
 struct dw_xpcs {
 	struct mdio_device *mdiodev;
 	const struct xpcs_id *id;
 	struct phylink_pcs pcs;
+	phy_interface_t interface;
+	int dev_flag;
 };
 
 int xpcs_get_an_mode(struct dw_xpcs *xpcs, phy_interface_t interface);