Merge tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree changes for 5.16:

- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
  Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
  various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
  properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
  device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
  partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.

* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
  ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
  ARM: dts: ls1021a: move thermal-zones node out of soc/
  ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
  ARM: dts: ls1021a-qds: change fpga to simple-mfd device
  ARM: dts: ls1021a: add #power-domain-cells for power-controller node
  ARM: dts: ls1021a: add #dma-cells to qdma node
  ARM: dts: ls1021a: fix memory node for schema check
  ARM: dts: ls1021a: remove regulators simple-bus
  ARM: dts: ls1021a: disable ifc node by default
  ARM: dts: ls1021a: breakup long values in thermal node
  ARM: dts: ls1021a: fix board compatible to follow binding schema
  ARM: dts: ls1021a: update pcie nodes for dt-schema check
  ARM: dts: ls1021a-qds: Add node for QSPI flash
  ARM: dts: ls1021a: change to use SPDX identifiers
  ARM: dts: ls1021a: change dma channels order to match schema
  ARM: dts: ls1021a: remove clock-names property for i2c nodes
  ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
  ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
  ARM: dts: imx6: skov: provide panel support for lt2 variants
  ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
  ...

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

39 files changed, 1653 insertions, 326 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dcca9db8e9ee..b62c6fbb606a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -645,10 +645,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-tolino-shine2hd.dtb \
 	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision5.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SLL) += \
 	imx6sll-evk.dtb \
-	imx6sll-kobo-clarahd.dtb
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-librah2o.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
@@ -681,6 +683,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index cfb239d5186a..1a49f15f2df2 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -41,7 +41,7 @@
 	leds: leds {
 		compatible = "gpio-leds";
 
-		on {
+		led {
 			label = "e60k02:white:on";
 			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
new file mode 100644
index 000000000000..156de653f2cd
--- /dev/null
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E70K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		pageup {
+			label = "PageUp";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEUP>;
+		};
+
+		pagedown {
+			label = "PageDown";
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEDOWN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e70k02:white:on";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* TODO: KX122 acceleration sensor a 0x1e */
+
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* TODO: CYTTSP5 touch controller at 0x24 */
+
+	/* TODO: SY7636 PMIC for E Ink at 0x62 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index 4329b372d8cb..e8325fd680d9 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -192,7 +192,7 @@
 };
 
 &ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
index a326a331508e..f028b6a191df 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
+++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
@@ -47,7 +47,6 @@
 	mpl3115a2: pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
-		vcc-supply = <&reg_3v3_acm>;
 
 		/*
 		 * The MPL3115 interrupts are connected to pin 22 and 23
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
index 5ac84445e9cc..56bb1ca56a2d 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -67,11 +67,9 @@
 		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
 				  <&gpio5 11 GPIO_ACTIVE_LOW>;
 		vin-supply = <&reg_3v3>;
-		vin-voltage-override = <3100000>;
 		autosuspend-delay = <30000>;
 		irq-status-read-quirk;
 		en2-rf-quirk;
-		t5t-rmb-extra-byte-quirk;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
index 667b8faa1807..b12b5aabe70a 100644
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
@@ -6,6 +6,7 @@
 #include "imx6dl.dtsi"
 #include "imx6qdl-skov-cpu.dtsi"
 #include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
 
 / {
 	model = "SKOV IMX6 CPU SoloCore";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index cb8b539eb29d..674af39c884a 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -277,6 +278,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
@@ -284,6 +286,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
@@ -291,13 +294,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
-		};
-
-		chan@3 {
-			chan-name = "W";
-			led-cur = /bits/ 8 <0x0>;
-			max-cur = /bits/ 8 <0x0>;
-			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
index f00add7b3048..ff97d22eb09f 100644
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
@@ -6,6 +6,7 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-skov-cpu.dtsi"
 #include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
 
 / {
 	model = "SKOV IMX6 CPU QuadCore";
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..ed2739e39085 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -310,10 +310,10 @@
 		st,mod-12b = <1>;
 		/* internal ADC reference */
 		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
+		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_touchscreen {
+		stmpe_touchscreen: stmpe-touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -330,10 +330,11 @@
 			st,touch-det-delay = <5>;
 		};
 
-		stmpe_adc {
+		stmpe_adc: stmpe-adc {
 			compatible = "st,stmpe-adc";
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
+			#io-channel-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 019938562aa9..120d6e997a4c 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -145,8 +145,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "disabled";
 
@@ -185,8 +188,11 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "disabled";
 };
@@ -256,6 +262,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
+	disable-wp;
 	status = "disabled";
 };
 
@@ -299,6 +306,20 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
@@ -306,10 +327,10 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index a80aa08a37cb..94b254bfd054 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -78,8 +78,11 @@
 };
 
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -259,6 +262,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
new file mode 100644
index 000000000000..48c9ce051f47
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <[email protected]>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l2rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
index b18b83ac6aee..51a3a5392c95 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -20,7 +20,7 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	m25p80: flash@0 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 89c342f3a7c2..f5de5def876d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -264,7 +264,7 @@
 		};
 
 		pcie: pcie@1ffc000 {
-			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6q-pcie";
 			reg = <0x01ffc000 0x04000>,
 			      <0x01f00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -272,10 +272,9 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			num-viewport = <4>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index b92e0f2748a5..7648e8a02000 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -123,7 +123,7 @@
 };
 
 &ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
@@ -189,7 +189,7 @@
 };
 
 &ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index b310f13a53f2..050365513836 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -110,5 +110,5 @@
 };
 
 &pcie {
-	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+	compatible = "fsl,imx6qp-pcie";
 };
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
new file mode 100644
index 000000000000..ff6118df3946
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Vision 5 ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Tolino Vision 5 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Tolino Vision 5";
+	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x79
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x10059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x10059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x10059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x10059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x10059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x10059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x10059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 997b96c1c47b..c7d907c5c352 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -55,18 +55,16 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  975000>;
+			fsl,soc-operating-points =
 				/* ARM kHz      SOC-PU uV */
-				996000          1225000
-				792000          1175000
-				396000          1175000
-			>;
+				<996000         1225000>,
+				<792000         1175000>,
+				<396000         1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
new file mode 100644
index 000000000000..a8b0e88064d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Libra H2O ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Kobo Libra H2O";
+	compatible = "kobo,librah2o", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21	0x79
+			MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x17059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x17059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x17059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x10059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x10059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x10059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x10059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x10059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x10059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x10059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059	 /* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 04f8d637a501..d4a000c3dde7 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -51,20 +51,18 @@
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
 				/* ARM kHz      SOC-PU uV */
-				996000          1175000
-				792000          1175000
-				396000          1175000
-				198000		1175000
-			>;
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SLL_CLK_ARM>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 8516730778df..fc6334336b3d 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1395,15 +1395,15 @@
 		};
 
 		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6sx-pcie";
 			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
 			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 19a062635ff6..3cddc68917a0 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -68,8 +68,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -147,6 +150,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2cgpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 95e4080dd0a6..0d4ba9494cf2 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -191,6 +191,7 @@
 	no-1-8-v;
 	keep-power-in-suspend;
 	wakeup-source;
+	disable-wp;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000000..61b93cb040c7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-emmc-eval",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
new file mode 100644
index 000000000000..a099abfdfa27
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+		mmc1 = &usdhc1; /* MMC 4bit slot */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_140",
+			  "SODIMM_59",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_133",
+			  "SODIMM_146",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
+		&pinctrl_gpmi_gpio>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 0cdbf7b6e728..7f35a06dff95 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2021 Toradex
  */
 
 #include "imx6ull.dtsi"
@@ -345,6 +345,19 @@
 		>;
 	};
 
+	/*
+	 * With an eMMC instead of a raw NAND device the following pins
+	 * are available at SODIMM pins
+	 */
+	pinctrl_gpmi_gpio: gpmi-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
+			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
+		>;
+	};
+
 	pinctrl_gpmi_nand: gpmi-nand-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
@@ -533,6 +546,21 @@
 		>;
 	};
 
+	pinctrl_usdhc2emmc: usdhc2emmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+		>;
+	};
+
 	pinctrl_wdog: wdog-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 5e6bef230dc7..49086c6b6a0a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems MBa7 carrier board.
+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  *
@@ -236,6 +236,44 @@
 	};
 };
 
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uboot@0 {
+			label = "U-Boot";
+			reg = <0x0 0xd0000>;
+		};
+
+		env1@d0000 {
+			label = "ENV1";
+			reg = <0xd0000 0x10000>;
+		};
+
+		env2@e0000 {
+			label = "ENV2";
+			reg = <0xe0000 0x10000>;
+		};
+
+		dtb@f0000 {
+			label = "DTB";
+			reg = <0xf0000 0x10000>;
+		};
+
+		linux@100000 {
+			label = "Linux";
+			reg = <0x100000 0x700000>;
+		};
+
+		rootfs@800000 {
+			label = "RootFS";
+			reg = <0x800000 0x3800000>;
+		};
+	};
+};
+
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
index 8773344b54aa..fe42b0a46831 100644
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  */
@@ -19,6 +19,16 @@
 	cpu-supply = <&sw1a_reg>;
 };
 
+&gpio2 {
+	/* Configured as pullup by QSPI pin group */
+	qspi-reset-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "qspi-reset";
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -160,6 +170,25 @@
 		>;
 	};
 
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
+			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
+			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
+			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
+			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
+			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
+			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
+		>;
+	};
+
+	pinctrl_qspi_reset: qspi_resetgrp {
+		fsl,pins = <
+			/* #QSPI_RESET */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
@@ -217,6 +246,20 @@
 	};
 };
 
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sdma {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
index 36ef6a3cdb0b..32bf9fa9d00e 100644
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  */
@@ -13,7 +13,7 @@
 #include "imx7-mba7.dtsi"
 
 / {
-	model = "TQ Systems TQMa7D board on MBa7 carrier board";
+	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
 	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
 };
 
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4a0d83784d7d..7813ef960f6e 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -45,7 +45,7 @@
 		pinctrl-0 = <&pinctrl_spi4>;
 		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
index 598aed1ffd99..3ee2017c1ab3 100644
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
+ * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  */
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b0bcfa9094a3..b7735979b7e4 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -164,7 +164,7 @@
 	};
 
 	pcie: pcie@33800000 {
-		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
+		compatible = "fsl,imx7d-pcie";
 		reg = <0x33800000 0x4000>,
 		      <0x4ff00000 0x80000>;
 		reg-names = "dbi", "config";
@@ -172,10 +172,9 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+			 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
 		num-lanes = <1>;
-		num-viewport = <4>;
 		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
index d7d3f530f843..8e4cf589c92c 100644
--- a/arch/arm/boot/dts/imx7s-mba7.dts
+++ b/arch/arm/boot/dts/imx7s-mba7.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
+ * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  */
@@ -13,6 +13,6 @@
 #include "imx7-mba7.dtsi"
 
 / {
-	model = "TQ Systems TQMa7S board on MBa7 carrier board";
+	model = "TQ-Systems TQMa7S board on MBa7 carrier board";
 	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
 };
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
index 5f5433eb7dd7..7a190fdb2d30 100644
--- a/arch/arm/boot/dts/imx7s-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
+ * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <[email protected]>
  * Copyright (C) 2019 Bruno Thomsen <[email protected]>
  */
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 74a67604876c..f1acb97aee69 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -67,19 +25,12 @@
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -231,9 +182,9 @@
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor@0,0 {
@@ -254,7 +205,7 @@
 	fpga: board-control@3,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		compatible = "simple-mfd";
 		reg = <0x3 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
@@ -328,6 +279,20 @@
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..ff0ffb22768b 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
 
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
@@ -136,7 +137,6 @@
 	/* 3 axis accelerometer */
 	accelerometer@1e {
 		compatible = "fsl,fxls8471";
-		position = <0>;
 		reg = <0x1e>;
 	};
 
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 5edf001f6138..f5c03871b205 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -65,19 +23,12 @@
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943..2e69d6eab4d1 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -51,7 +9,6 @@
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
-	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -90,7 +47,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x0>;
 	};
@@ -169,6 +126,7 @@
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		dcfg: dcfg@1ee0000 {
@@ -290,78 +248,45 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -394,10 +319,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
 			status = "disabled";
 		};
 
@@ -407,10 +331,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
 			status = "disabled";
 		};
 
@@ -420,10 +343,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
 			status = "disabled";
 		};
 
@@ -884,8 +806,8 @@
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -894,8 +816,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -908,8 +830,8 @@
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -918,8 +840,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -992,6 +914,7 @@
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error",
 				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x1000>;
@@ -1005,6 +928,7 @@
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
+			#power-domain-cells = <0>;
 		};
 
 		ftm_alarm0: timer0@29d0000 {
@@ -1016,4 +940,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };