diff options
| author | Marijn Suijten <[email protected]> | 2022-10-30 08:32:29 +0100 |
|---|---|---|
| committer | Bjorn Andersson <[email protected]> | 2022-11-07 17:25:47 -0600 |
| commit | 85eef5cb65ab7e8905725d13c98c90442bb93dbc (patch) | |
| tree | 114a23ff019ea06c3ecac8046410e5a2a9cab059 | |
| parent | deaf8c88db7d327ba768ac224e53d29f56027331 (diff) | |
arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot)
Without power the SDCard slot / hardware remains dormant.
Like many other platforms these regulators are used exclusively by
SDHCI, and have their maximum voltage decreased to what downstream sets
on the consumer side. Additionally the SDHCI driver supports setting a
load, for which the regulator definition is extended much the same.
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 1aaa9612b061..5cb76026ef67 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -219,8 +219,13 @@ pm6150l_l6: ldo6 { regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; pm6150l_l7: ldo7 { @@ -237,8 +242,13 @@ pm6150l_l9: ldo9 { regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; pm6150l_l10: ldo10 { @@ -300,6 +310,9 @@ &sdhc_2 { status = "okay"; + vmmc-supply = <&pm6150l_l9>; + vqmmc-supply = <&pm6150l_l6>; + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; }; |