Merge branch 'net-dsa-mt7530-updates-for-phylink-changes'

Russell King says:

====================
net: dsa: mt7530: updates for phylink changes

This revised series is a partial conversion of the mt7530 DSA driver to
the modern phylink infrastructure. This driver has some exceptional
cases which prevent - at the moment - its full conversion (particularly
with the Autoneg bit) to using phylink_generic_validate().

Patch 1 fixes the incorrect test highlighted in the first RFC series.

Patch 2 fixes the incorrect assumption that RGMII is unable to support
1000BASE-X.

Patch 3 populates the supported_interfaces for each port

Patch 4 removes the interface checks that become unnecessary as a result
of patch 3.

Patch 5 removes use of phylink_helper_basex_speed() which is no longer
required by phylink.

Patch 6 becomes possible after patch 5, only indicating the ethtool
modes that can be supported with a particular interface mode - this
involves removing some modes and adding others as per phylink
documentation.

Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
the driver as close as we can to phylink_generic_validate() due to the
Autoneg bit issue mentioned above.

Patch 8 converts the driver to the phylink pcs support, removing a bunch
of driver private indirected methods. We include TRGMII as a PCS even
though strictly TRGMII does not have a PCS. This is convenient to allow
the change in patch 9 to be made.

Patch 9 moves the special autoneg handling to the PCS validate method,
which means we can convert the MAC side to the generic validator.

Patch 10 marks the driver as non-legacy.

The series was posted on 23 February, and a ping sent on 3 March, but
no feedback has been received. The previous posting also received no
feedback on the actual patches either.

v2:
- fix build issue in patch 5
- add Marek's tested-by

 drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
 drivers/net/dsa/mt7530.h |  26 ++--
 2 files changed, 159 insertions(+), 197 deletions(-)
====================

Link: https://lore.kernel.org/r/YlP4vGKVrlIJUUHK@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2 files changed, 159 insertions, 197 deletions

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 19f0035d4410..c4ea73d996e8 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -24,6 +24,11 @@
 
 #include "mt7530.h"
 
+static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct mt753x_pcs, pcs);
+}
+
 /* String, offset, and register size in bytes if different from 4 bytes */
 static const struct mt7530_mib_desc mt7530_mib[] = {
 	MIB_DESC(1, 0x00, "TxDrop"),
@@ -2389,35 +2394,30 @@ mt7531_setup(struct dsa_switch *ds)
 	return 0;
 }
 
-static bool
-mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
-			  const struct phylink_link_state *state)
+static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
 {
-	struct mt7530_priv *priv = ds->priv;
-
 	switch (port) {
 	case 0 ... 4: /* Internal phy */
-		if (state->interface != PHY_INTERFACE_MODE_GMII)
-			return false;
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
 		break;
+
 	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_MII &&
-		    state->interface != PHY_INTERFACE_MODE_GMII)
-			return false;
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
 		break;
+
 	case 6: /* 1st cpu port */
-		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
-		    state->interface != PHY_INTERFACE_MODE_TRGMII)
-			return false;
+		__set_bit(PHY_INTERFACE_MODE_RGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_TRGMII,
+			  config->supported_interfaces);
 		break;
-	default:
-		dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
-			port);
-		return false;
 	}
-
-	return true;
 }
 
 static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
@@ -2425,42 +2425,35 @@ static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
 	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
 }
 
-static bool
-mt7531_phy_mode_supported(struct dsa_switch *ds, int port,
-			  const struct phylink_link_state *state)
+static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
 {
 	struct mt7530_priv *priv = ds->priv;
 
 	switch (port) {
 	case 0 ... 4: /* Internal phy */
-		if (state->interface != PHY_INTERFACE_MODE_GMII)
-			return false;
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
 		break;
+
 	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
-		if (mt7531_is_rgmii_port(priv, port))
-			return phy_interface_mode_is_rgmii(state->interface);
+		if (mt7531_is_rgmii_port(priv, port)) {
+			phy_interface_set_rgmii(config->supported_interfaces);
+			break;
+		}
 		fallthrough;
+
 	case 6: /* 1st cpu port supports sgmii/8023z only */
-		if (state->interface != PHY_INTERFACE_MODE_SGMII &&
-		    !phy_interface_mode_is_8023z(state->interface))
-			return false;
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_2500FD;
 		break;
-	default:
-		dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
-			port);
-		return false;
 	}
-
-	return true;
-}
-
-static bool
-mt753x_phy_mode_supported(struct dsa_switch *ds, int port,
-			  const struct phylink_link_state *state)
-{
-	struct mt7530_priv *priv = ds->priv;
-
-	return priv->info->phy_mode_supported(ds, port, state);
 }
 
 static int
@@ -2533,30 +2526,11 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
 	return 0;
 }
 
-static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
-				  unsigned long *supported)
-{
-	/* Port5 supports ethier RGMII or SGMII.
-	 * Port6 supports SGMII only.
-	 */
-	switch (port) {
-	case 5:
-		if (mt7531_is_rgmii_port(priv, port))
-			break;
-		fallthrough;
-	case 6:
-		phylink_set(supported, 1000baseX_Full);
-		phylink_set(supported, 2500baseX_Full);
-		phylink_set(supported, 2500baseT_Full);
-	}
-}
-
-static void
-mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port,
-			   unsigned int mode, phy_interface_t interface,
-			   int speed, int duplex)
+static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			       phy_interface_t interface, int speed, int duplex)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
+	int port = pcs_to_mt753x_pcs(pcs)->port;
 	unsigned int val;
 
 	/* For adjusting speed and duplex of SGMII force mode. */
@@ -2582,6 +2556,9 @@ mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port,
 
 	/* MT7531 SGMII 1G force mode can only work in full duplex mode,
 	 * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
+	 *
+	 * The speed check is unnecessary as the MAC capabilities apply
+	 * this restriction. --rmk
 	 */
 	if ((speed == SPEED_10 || speed == SPEED_100) &&
 	    duplex != DUPLEX_FULL)
@@ -2657,9 +2634,10 @@ static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
 	return 0;
 }
 
-static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port)
+static void mt7531_pcs_an_restart(struct phylink_pcs *pcs)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
+	int port = pcs_to_mt753x_pcs(pcs)->port;
 	u32 val;
 
 	/* Only restart AN when AN is enabled */
@@ -2716,6 +2694,24 @@ mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 	return priv->info->mac_port_config(ds, port, mode, state->interface);
 }
 
+static struct phylink_pcs *
+mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+			      phy_interface_t interface)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_TRGMII:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_2500BASEX:
+		return &priv->pcs[port].pcs;
+
+	default:
+		return NULL;
+	}
+}
+
 static void
 mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 			  const struct phylink_link_state *state)
@@ -2723,9 +2719,6 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 	struct mt7530_priv *priv = ds->priv;
 	u32 mcr_cur, mcr_new;
 
-	if (!mt753x_phy_mode_supported(ds, port, state))
-		goto unsupported;
-
 	switch (port) {
 	case 0 ... 4: /* Internal phy */
 		if (state->interface != PHY_INTERFACE_MODE_GMII)
@@ -2780,17 +2773,6 @@ unsupported:
 		mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
 }
 
-static void
-mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port)
-{
-	struct mt7530_priv *priv = ds->priv;
-
-	if (!priv->info->mac_pcs_an_restart)
-		return;
-
-	priv->info->mac_pcs_an_restart(ds, port);
-}
-
 static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
 					 unsigned int mode,
 					 phy_interface_t interface)
@@ -2800,16 +2782,13 @@ static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
 }
 
-static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port,
-				   unsigned int mode, phy_interface_t interface,
-				   int speed, int duplex)
+static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
+				       unsigned int mode,
+				       phy_interface_t interface,
+				       int speed, int duplex)
 {
-	struct mt7530_priv *priv = ds->priv;
-
-	if (!priv->info->mac_pcs_link_up)
-		return;
-
-	priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex);
+	if (pcs->ops->pcs_link_up)
+		pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
 }
 
 static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -2822,8 +2801,6 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	struct mt7530_priv *priv = ds->priv;
 	u32 mcr;
 
-	mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex);
-
 	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
 
 	/* MT753x MAC works in 1G full duplex mode for all up-clocked
@@ -2903,81 +2880,51 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
 		return ret;
 	mt7530_write(priv, MT7530_PMCR_P(port),
 		     PMCR_CPU_PORT_SETTING(priv->id));
+	mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
+				   interface, speed, DUPLEX_FULL);
 	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
 				   speed, DUPLEX_FULL, true, true);
 
 	return 0;
 }
 
-static void
-mt7530_mac_port_validate(struct dsa_switch *ds, int port,
-			 unsigned long *supported)
+static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+				    struct phylink_config *config)
 {
-	if (port == 5)
-		phylink_set(supported, 1000baseX_Full);
-}
-
-static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
-				     unsigned long *supported)
-{
-	struct mt7530_priv *priv = ds->priv;
-
-	mt7531_sgmii_validate(priv, port, supported);
-}
-
-static void
-mt753x_phylink_validate(struct dsa_switch *ds, int port,
-			unsigned long *supported,
-			struct phylink_link_state *state)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 	struct mt7530_priv *priv = ds->priv;
 
-	if (state->interface != PHY_INTERFACE_MODE_NA &&
-	    !mt753x_phy_mode_supported(ds, port, state)) {
-		linkmode_zero(supported);
-		return;
-	}
-
-	phylink_set_port_modes(mask);
-
-	if (state->interface != PHY_INTERFACE_MODE_TRGMII &&
-	    !phy_interface_mode_is_8023z(state->interface)) {
-		phylink_set(mask, 10baseT_Half);
-		phylink_set(mask, 10baseT_Full);
-		phylink_set(mask, 100baseT_Half);
-		phylink_set(mask, 100baseT_Full);
-		phylink_set(mask, Autoneg);
-	}
-
-	/* This switch only supports 1G full-duplex. */
-	if (state->interface != PHY_INTERFACE_MODE_MII)
-		phylink_set(mask, 1000baseT_Full);
+	/* This switch only supports full-duplex at 1Gbps */
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
 
-	priv->info->mac_port_validate(ds, port, mask);
+	/* This driver does not make use of the speed, duplex, pause or the
+	 * advertisement in its mac_config, so it is safe to mark this driver
+	 * as non-legacy.
+	 */
+	config->legacy_pre_march2020 = false;
 
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
+	priv->info->mac_port_get_caps(ds, port, config);
+}
 
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
+static int mt753x_pcs_validate(struct phylink_pcs *pcs,
+			       unsigned long *supported,
+			       const struct phylink_link_state *state)
+{
+	/* Autonegotiation is not supported in TRGMII nor 802.3z modes */
+	if (state->interface == PHY_INTERFACE_MODE_TRGMII ||
+	    phy_interface_mode_is_8023z(state->interface))
+		phylink_clear(supported, Autoneg);
 
-	/* We can only operate at 2500BaseX or 1000BaseX.  If requested
-	 * to advertise both, only report advertising at 2500BaseX.
-	 */
-	phylink_helper_basex_speed(state);
+	return 0;
 }
 
-static int
-mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port,
-			      struct phylink_link_state *state)
+static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
+				 struct phylink_link_state *state)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
+	int port = pcs_to_mt753x_pcs(pcs)->port;
 	u32 pmsr;
 
-	if (port < 0 || port >= MT7530_NUM_PORTS)
-		return -EINVAL;
-
 	pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
 
 	state->link = (pmsr & PMSR_LINK);
@@ -3004,8 +2951,6 @@ mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port,
 		state->pause |= MLO_PAUSE_RX;
 	if (pmsr & PMSR_TX_FC)
 		state->pause |= MLO_PAUSE_TX;
-
-	return 1;
 }
 
 static int
@@ -3047,32 +2992,51 @@ mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port,
 	return 0;
 }
 
-static int
-mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port,
-			      struct phylink_link_state *state)
+static void mt7531_pcs_get_state(struct phylink_pcs *pcs,
+				 struct phylink_link_state *state)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
+	int port = pcs_to_mt753x_pcs(pcs)->port;
 
 	if (state->interface == PHY_INTERFACE_MODE_SGMII)
-		return mt7531_sgmii_pcs_get_state_an(priv, port, state);
-
-	return -EOPNOTSUPP;
+		mt7531_sgmii_pcs_get_state_an(priv, port, state);
+	else
+		state->link = false;
 }
 
-static int
-mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port,
-			      struct phylink_link_state *state)
+static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			     phy_interface_t interface,
+			     const unsigned long *advertising,
+			     bool permit_pause_to_mac)
 {
-	struct mt7530_priv *priv = ds->priv;
+	return 0;
+}
 
-	return priv->info->mac_port_get_state(ds, port, state);
+static void mt7530_pcs_an_restart(struct phylink_pcs *pcs)
+{
 }
 
+static const struct phylink_pcs_ops mt7530_pcs_ops = {
+	.pcs_validate = mt753x_pcs_validate,
+	.pcs_get_state = mt7530_pcs_get_state,
+	.pcs_config = mt753x_pcs_config,
+	.pcs_an_restart = mt7530_pcs_an_restart,
+};
+
+static const struct phylink_pcs_ops mt7531_pcs_ops = {
+	.pcs_validate = mt753x_pcs_validate,
+	.pcs_get_state = mt7531_pcs_get_state,
+	.pcs_config = mt753x_pcs_config,
+	.pcs_an_restart = mt7531_pcs_an_restart,
+	.pcs_link_up = mt7531_pcs_link_up,
+};
+
 static int
 mt753x_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
 	int ret = priv->info->sw_setup(ds);
+	int i;
 
 	if (ret)
 		return ret;
@@ -3085,6 +3049,13 @@ mt753x_setup(struct dsa_switch *ds)
 	if (ret && priv->irq)
 		mt7530_free_irq_common(priv);
 
+	/* Initialise the PCS devices */
+	for (i = 0; i < priv->ds->num_ports; i++) {
+		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
+		priv->pcs[i].priv = priv;
+		priv->pcs[i].port = i;
+	}
+
 	return ret;
 }
 
@@ -3144,10 +3115,9 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_vlan_del		= mt7530_port_vlan_del,
 	.port_mirror_add	= mt753x_port_mirror_add,
 	.port_mirror_del	= mt753x_port_mirror_del,
-	.phylink_validate	= mt753x_phylink_validate,
-	.phylink_mac_link_state	= mt753x_phylink_mac_link_state,
+	.phylink_get_caps	= mt753x_phylink_get_caps,
+	.phylink_mac_select_pcs	= mt753x_phylink_mac_select_pcs,
 	.phylink_mac_config	= mt753x_phylink_mac_config,
-	.phylink_mac_an_restart	= mt753x_phylink_mac_an_restart,
 	.phylink_mac_link_down	= mt753x_phylink_mac_link_down,
 	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
 	.get_mac_eee		= mt753x_get_mac_eee,
@@ -3157,39 +3127,34 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 static const struct mt753x_info mt753x_table[] = {
 	[ID_MT7621] = {
 		.id = ID_MT7621,
+		.pcs_ops = &mt7530_pcs_ops,
 		.sw_setup = mt7530_setup,
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
-		.phy_mode_supported = mt7530_phy_mode_supported,
-		.mac_port_validate = mt7530_mac_port_validate,
-		.mac_port_get_state = mt7530_phylink_mac_link_state,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.mac_port_config = mt7530_mac_config,
 	},
 	[ID_MT7530] = {
 		.id = ID_MT7530,
+		.pcs_ops = &mt7530_pcs_ops,
 		.sw_setup = mt7530_setup,
 		.phy_read = mt7530_phy_read,
 		.phy_write = mt7530_phy_write,
 		.pad_setup = mt7530_pad_clk_setup,
-		.phy_mode_supported = mt7530_phy_mode_supported,
-		.mac_port_validate = mt7530_mac_port_validate,
-		.mac_port_get_state = mt7530_phylink_mac_link_state,
+		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.mac_port_config = mt7530_mac_config,
 	},
 	[ID_MT7531] = {
 		.id = ID_MT7531,
+		.pcs_ops = &mt7531_pcs_ops,
 		.sw_setup = mt7531_setup,
 		.phy_read = mt7531_ind_phy_read,
 		.phy_write = mt7531_ind_phy_write,
 		.pad_setup = mt7531_pad_setup,
 		.cpu_port_config = mt7531_cpu_port_config,
-		.phy_mode_supported = mt7531_phy_mode_supported,
-		.mac_port_validate = mt7531_mac_port_validate,
-		.mac_port_get_state = mt7531_phylink_mac_link_state,
+		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.mac_port_config = mt7531_mac_config,
-		.mac_pcs_an_restart = mt7531_sgmii_restart_an,
-		.mac_pcs_link_up = mt7531_sgmii_link_up_force,
 	},
 };
 
@@ -3246,9 +3211,8 @@ mt7530_probe(struct mdio_device *mdiodev)
 	 */
 	if (!priv->info->sw_setup || !priv->info->pad_setup ||
 	    !priv->info->phy_read || !priv->info->phy_write ||
-	    !priv->info->phy_mode_supported ||
-	    !priv->info->mac_port_validate ||
-	    !priv->info->mac_port_get_state || !priv->info->mac_port_config)
+	    !priv->info->mac_port_get_caps ||
+	    !priv->info->mac_port_config)
 		return -EINVAL;
 
 	priv->id = priv->info->id;
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 91508e2feef9..71e36b69b96d 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -741,6 +741,12 @@ static const char *p5_intf_modes(unsigned int p5_interface)
 
 struct mt7530_priv;
 
+struct mt753x_pcs {
+	struct phylink_pcs pcs;
+	struct mt7530_priv *priv;
+	int port;
+};
+
 /* struct mt753x_info -	This is the main data structure for holding the specific
  *			part for each supported device
  * @sw_setup:		Holding the handler to a device initialization
@@ -752,36 +758,27 @@ struct mt7530_priv;
  *			port
  * @mac_port_validate:	Holding the way to set addition validate type for a
  *			certan MAC port
- * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain
- *			MAC port
  * @mac_port_config:	Holding the way setting up the PHY attribute to a
  *			certain MAC port
- * @mac_pcs_an_restart	Holding the way restarting PCS autonegotiation for a
- *			certain MAC port
- * @mac_pcs_link_up:	Holding the way setting up the PHY attribute to the pcs
- *			of the certain MAC port
  */
 struct mt753x_info {
 	enum mt753x_id id;
 
+	const struct phylink_pcs_ops *pcs_ops;
+
 	int (*sw_setup)(struct dsa_switch *ds);
 	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
-	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
-				   const struct phylink_link_state *state);
+	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+				  struct phylink_config *config);
 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
+				  phy_interface_t interface,
 				  unsigned long *supported);
-	int (*mac_port_get_state)(struct dsa_switch *ds, int port,
-				  struct phylink_link_state *state);
 	int (*mac_port_config)(struct dsa_switch *ds, int port,
 			       unsigned int mode,
 			       phy_interface_t interface);
-	void (*mac_pcs_an_restart)(struct dsa_switch *ds, int port);
-	void (*mac_pcs_link_up)(struct dsa_switch *ds, int port,
-				unsigned int mode, phy_interface_t interface,
-				int speed, int duplex);
 };
 
 /* struct mt7530_priv -	This is the main data structure for holding the state
@@ -823,6 +820,7 @@ struct mt7530_priv {
 	u8			mirror_tx;
 
 	struct mt7530_port	ports[MT7530_NUM_PORTS];
+	struct mt753x_pcs	pcs[MT7530_NUM_PORTS];
 	/* protect among processes for registers access*/
 	struct mutex reg_mutex;
 	int irq;