Merge tag 'ux500-dts-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Ux500 DTS updates for the v5.18 kernel cycle:

- Add battery thermal zones so we can monitor the battery temperature
- Enable charging options on AB8505
- Fix up all the AB8500 and AB8505 nodes in accordance with the new
  schema.
- Fix the mounting matrix for the Janice phone.

* tag 'ux500-dts-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Correct Janice accel mount matrix
  ARM: dts: ux500: Update AB850[05] nodes
  ARM: dts: AB8505: Enable charging options
  ARM: dts: ux500: Add battery thermal zones and NTCs

Link: https://lore.kernel.org/r/CACRpkdaDcEqtSnWzRBnBHVweh2n=Dj3meHG9LND+K0Czb9ORGg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

11 files changed, 203 insertions, 58 deletions

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 2cf19386a525..35137c6e52ee 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -28,26 +28,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpiocontroller {
+				ab8500_gpio: gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
 						     <39 IRQ_TYPE_LEVEL_HIGH>;
@@ -120,13 +122,10 @@
 					};
 				};
 
-				ab8500_temp {
+				thermal {
 					compatible = "stericsson,abx500-temp";
 					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ABX500_TEMP_WARM";
-					io-channels = <&gpadc 0x06>,
-						      <&gpadc 0x07>;
-					io-channel-names = "aux1", "aux2";
 				};
 
 				ab8500_fg {
@@ -212,7 +211,7 @@
 					monitored-battery	= <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -236,7 +235,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,29 +246,31 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm-1 {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-2 {
+				pwm@2 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <2>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-3 {
+				pwm@3 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <3>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -283,7 +284,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
@@ -307,7 +308,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					compatible = "stericsson,ab8500-regulator";
 					vin-supply = <&ab8500_ext3_reg>;
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index e98335e9d1cb..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -25,26 +25,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpiocontroller {
+				ab8505_gpio: gpio {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "SW_CONV_END";
@@ -92,8 +94,13 @@
 					};
 				};
 
+				thermal {
+					compatible = "stericsson,abx500-temp";
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ABX500_TEMP_WARM";
+				};
+
 				ab8500_fg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-fg";
 					interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
 						     <8 IRQ_TYPE_LEVEL_HIGH>,
@@ -111,7 +118,6 @@
 				};
 
 				ab8500_btemp {
-					status = "disabled";
 					compatible = "stericsson,ab8500-btemp";
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
 						     <80 IRQ_TYPE_LEVEL_HIGH>,
@@ -131,7 +137,6 @@
 				};
 
 				ab8500_charger {
-					status = "disabled";
 					compatible = "stericsson,ab8500-charger";
 					interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 						     <11 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,12 +175,11 @@
 				};
 
 				ab8500_chargalg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-chargalg";
 					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -199,7 +203,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -210,17 +214,15 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -233,7 +235,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ab8505-regulators {
+				regulator {
 					compatible = "stericsson,ab8505-regulator";
 
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 3ccb7b5c7162..9fa024900d53 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 718752a0248e..fbaa0ce46427 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,7 +16,24 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	soc {
@@ -219,16 +236,16 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index fb719c8a8eb2..1c9094f24893 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -20,7 +20,24 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	en_3v3_reg: en_3v3 {
@@ -384,7 +401,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
@@ -406,13 +423,13 @@
 						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					ab8500_ext1_reg: ab8500_ext1 {
 						regulator-name = "ab8500-ext-supply1";
 					};
@@ -426,7 +443,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index fbd60065542d..1c1725d31c7c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -47,6 +47,24 @@
 		compatible = "samsung,eb425161lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -459,13 +477,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 1c0e5cfeddac..fd170974765f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb585157lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -432,13 +450,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index fc4c5166d85b..290ab59e863d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -29,6 +29,24 @@
 		compatible = "samsung,eb-l1m7flu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -280,13 +298,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						regulator-name = "sensor_3v";
 						regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 5ddcbc1a855d..42762bfcd878 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb535151vu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
 	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
 		compatible = "regulator-fixed";
@@ -480,13 +498,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -594,7 +612,7 @@
 						reg = <0x08>;
 						mount-matrix = "0", "1", "0",
 							       "-1", "0", "0",
-							       "0", "0", "-1";
+							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 9ec3f85b1a18..2a5bf54137ce 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -28,6 +28,24 @@
 		compatible = "samsung,eb425161la";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -301,13 +319,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 580ca497f312..ce104f9552d3 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb485159lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -285,13 +303,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";