Merge patch series "riscv: kexec: cleanup and fixups"

Song Shuai <[email protected]> says:

This series contains a cleanup for riscv_kexec_relocate() and two fixups
for KEXEC_FILE and had passed the basic kexec test in my 64bit Qemu-virt.

You can use this kexec-tools[3] to test the kexec-file-syscall and these patches.

riscv: kexec: Cleanup riscv_kexec_relocate (patch1)
==================================================

For readability and simplicity, cleanup the riscv_kexec_relocate code:

 - Re-sort the first 4 `mv` instructions against `riscv_kexec_method()`
 - Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6)
 - Replace `jalr` with `jr` for no-link jump

riscv: kexec: Align the kexeced kernel entry (patch2)
==================================================

The current riscv boot protocol requires 2MB alignment for RV64
and 4MB alignment for RV32.

In KEXEC_FILE path, the elf_find_pbase() function should align
the kexeced kernel entry according to the requirement, otherwise
the kexeced kernel would silently BUG at the setup_vm().

riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS (patch3)
==================================================

With CONFIG_RELOCATABLE enabled, KBUILD_CFLAGS had a -fPIE option
and then the purgatory/string.o was built to reference _ctype symbol
via R_RISCV_GOT_HI20 relocations which can't be handled by purgatory.

As a consequence, the kernel failed kexec_load_file() with:

[  880.386562] kexec_image: The entry point of kernel at 0x80200000
[  880.388650] kexec_image: Unknown rela relocation: 20
[  880.389173] kexec_image: Error loading purgatory ret=-8

So remove the -fPIE option for PURGATORY_CFLAGS to generate
R_RISCV_PCREL_HI20 relocations type making puragtory work as it was.

 arch/riscv/kernel/elf_kexec.c      |  8 ++++-
 arch/riscv/kernel/kexec_relocate.S | 52 +++++++++++++-----------------
 arch/riscv/purgatory/Makefile      |  4 +++
 3 files changed, 34 insertions(+), 30 deletions(-)

* b4-shazam-merge:
  riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS
  riscv: kexec: Align the kexeced kernel entry
  riscv: kexec: Cleanup riscv_kexec_relocate

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>

3 files changed, 34 insertions, 30 deletions

diff --git a/arch/riscv/kernel/elf_kexec.c b/arch/riscv/kernel/elf_kexec.c
index f4099059ed8f..e60fbd8660c4 100644
--- a/arch/riscv/kernel/elf_kexec.c
+++ b/arch/riscv/kernel/elf_kexec.c
@@ -98,7 +98,13 @@ static int elf_find_pbase(struct kimage *image, unsigned long kernel_len,
 	kbuf.image = image;
 	kbuf.buf_min = lowest_paddr;
 	kbuf.buf_max = ULONG_MAX;
-	kbuf.buf_align = PAGE_SIZE;
+
+	/*
+	 * Current riscv boot protocol requires 2MB alignment for
+	 * RV64 and 4MB alignment for RV32
+	 *
+	 */
+	kbuf.buf_align = PMD_SIZE;
 	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	kbuf.memsz = ALIGN(kernel_len, PAGE_SIZE);
 	kbuf.top_down = false;
diff --git a/arch/riscv/kernel/kexec_relocate.S b/arch/riscv/kernel/kexec_relocate.S
index 059c5e216ae7..de0a4b35d01e 100644
--- a/arch/riscv/kernel/kexec_relocate.S
+++ b/arch/riscv/kernel/kexec_relocate.S
@@ -17,27 +17,17 @@ SYM_CODE_START(riscv_kexec_relocate)
 	 * s1: (const) Phys address to jump to after relocation
 	 * s2: (const) Phys address of the FDT image
 	 * s3: (const) The hartid of the current hart
-	 * s4: Pointer to the destination address for the relocation
-	 * s5: (const) Number of words per page
-	 * s6: (const) 1, used for subtraction
-	 * s7: (const) kernel_map.va_pa_offset, used when switching MMU off
-	 * s8: (const) Physical address of the main loop
-	 * s9: (debug) indirection page counter
-	 * s10: (debug) entry counter
-	 * s11: (debug) copied words counter
+	 * s4: (const) kernel_map.va_pa_offset, used when switching MMU off
+	 * s5: Pointer to the destination address for the relocation
+	 * s6: (const) Physical address of the main loop
 	 */
 	mv	s0, a0
 	mv	s1, a1
 	mv	s2, a2
 	mv	s3, a3
-	mv	s4, zero
-	li	s5, (PAGE_SIZE / RISCV_SZPTR)
-	li	s6, 1
-	mv	s7, a4
-	mv	s8, zero
-	mv	s9, zero
-	mv	s10, zero
-	mv	s11, zero
+	mv	s4, a4
+	mv	s5, zero
+	mv	s6, zero
 
 	/* Disable / cleanup interrupts */
 	csrw	CSR_SIE, zero
@@ -52,21 +42,27 @@ SYM_CODE_START(riscv_kexec_relocate)
 	 * the start of the loop below so that we jump there in
 	 * any case.
 	 */
-	la	s8, 1f
-	sub	s8, s8, s7
-	csrw	CSR_STVEC, s8
+	la	s6, 1f
+	sub	s6, s6, s4
+	csrw	CSR_STVEC, s6
+
+	/*
+	 * With C-extension, here we get 42 Bytes and the next
+	 * .align directive would pad zeros here up to 44 Bytes.
+	 * So manually put a nop here to avoid zeros padding.
+	*/
+	nop
 
 	/* Process entries in a loop */
 .align 2
 1:
-	addi	s10, s10, 1
 	REG_L	t0, 0(s0)		/* t0 = *image->entry */
 	addi	s0, s0, RISCV_SZPTR	/* image->entry++ */
 
 	/* IND_DESTINATION entry ? -> save destination address */
 	andi	t1, t0, 0x1
 	beqz	t1, 2f
-	andi	s4, t0, ~0x1
+	andi	s5, t0, ~0x1
 	j	1b
 
 2:
@@ -74,9 +70,8 @@ SYM_CODE_START(riscv_kexec_relocate)
 	andi	t1, t0, 0x2
 	beqz	t1, 2f
 	andi	s0, t0, ~0x2
-	addi	s9, s9, 1
 	csrw	CSR_SATP, zero
-	jalr	zero, s8, 0
+	jr	s6
 
 2:
 	/* IND_DONE entry ? -> jump to done label */
@@ -92,14 +87,13 @@ SYM_CODE_START(riscv_kexec_relocate)
 	andi	t1, t0, 0x8
 	beqz	t1, 1b		/* Unknown entry type, ignore it */
 	andi	t0, t0, ~0x8
-	mv	t3, s5		/* i = num words per page */
+	li	t3, (PAGE_SIZE / RISCV_SZPTR)	/* i = num words per page */
 3:	/* copy loop */
 	REG_L	t1, (t0)	/* t1 = *src_ptr */
-	REG_S	t1, (s4)	/* *dst_ptr = *src_ptr */
+	REG_S	t1, (s5)	/* *dst_ptr = *src_ptr */
 	addi	t0, t0, RISCV_SZPTR /* stc_ptr++ */
-	addi	s4, s4, RISCV_SZPTR /* dst_ptr++ */
-	sub	t3, t3, s6	/* i-- */
-	addi	s11, s11, 1	/* c++ */
+	addi	s5, s5, RISCV_SZPTR /* dst_ptr++ */
+	addi	t3, t3, -0x1	/* i-- */
 	beqz	t3, 1b		/* copy done ? */
 	j	3b
 
@@ -146,7 +140,7 @@ SYM_CODE_START(riscv_kexec_relocate)
 	 */
 	fence.i
 
-	jalr	zero, a2, 0
+	jr	a2
 
 SYM_CODE_END(riscv_kexec_relocate)
 riscv_kexec_relocate_end:
diff --git a/arch/riscv/purgatory/Makefile b/arch/riscv/purgatory/Makefile
index 9e6476719abb..982fc8e77108 100644
--- a/arch/riscv/purgatory/Makefile
+++ b/arch/riscv/purgatory/Makefile
@@ -81,6 +81,10 @@ ifdef CONFIG_CFI_CLANG
 PURGATORY_CFLAGS_REMOVE		+= $(CC_FLAGS_CFI)
 endif
 
+ifdef CONFIG_RELOCATABLE
+PURGATORY_CFLAGS_REMOVE		+= -fPIE
+endif
+
 CFLAGS_REMOVE_purgatory.o	+= $(PURGATORY_CFLAGS_REMOVE)
 CFLAGS_purgatory.o		+= $(PURGATORY_CFLAGS)