arm64: tegra: Fix Jetson Nano GPU regulator

There are a few issues with the GPU regulator defined for Jetson Nano
which are:

1. The GPU regulator is a PWM based regulator and not a fixed voltage
   regulator.
2. The output voltages for the GPU regulator are not correct.
3. The regulator enable ramp delay is too short for the regulator and
   needs to be increased. 2ms should be sufficient.
4. This is the same regulator used on Jetson TX1 and so make the ramp
   delay and settling time the same as Jetson TX1.

Cc: [email protected]
Signed-off-by: Jon Hunter <[email protected]>
Fixes: 6772cd0eacc8 ("arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support")
Signed-off-by: Thierry Reding <[email protected]>

1 files changed, 8 insertions, 9 deletions

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 9234b70ae454..9d17ec707bce 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -668,17 +668,16 @@
 		};
 
 		vdd_gpu: regulator@6 {
-			compatible = "regulator-fixed";
+			compatible = "pwm-regulator";
 			reg = <6>;
-
+			pwms = <&pwm 1 4880>;
 			regulator-name = "VDD_GPU";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-enable-ramp-delay = <250>;
-
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-
+			regulator-min-microvolt = <710000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-ramp-delay = <80>;
+			regulator-enable-ramp-delay = <2000>;
+			regulator-settling-time-us = <160>;
+			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
 			vin-supply = <&vdd_5v0_sys>;
 		};
 	};