diff options
| author | Eric Biggers <[email protected]> | 2020-07-10 00:20:10 -0700 |
|---|---|---|
| committer | Bjorn Andersson <[email protected]> | 2020-07-14 13:01:01 -0700 |
| commit | 433f9a57298fce84b7e91036a1ab26496b67be03 (patch) | |
| tree | 66ba5f516dafefef9f67485e969c4bba85910502 | |
| parent | ccc6e8a1d6e936643e4b7e5b35f9456a7e36365c (diff) | |
arm64: dts: sdm845: add Inline Crypto Engine registers and clock
Add the vendor-specific registers and clock for Qualcomm ICE (Inline
Crypto Engine) to the device tree node for the UFS host controller on
sdm845, so that the ufs-qcom driver will be able to use inline crypto.
Use a separate register range rather than extending the main UFS range
because there's a gap between the two, and the ICE registers are
vendor-specific. (Actually, the hardware claims that the ICE range also
includes the array of standard crypto configuration registers; however,
on this SoC the Linux kernel isn't permitted to access them directly.)
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index c7bbb290bfcf..759cdd0b002b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2060,7 +2060,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -2080,7 +2082,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -2089,7 +2092,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <50000000 200000000>, <0 0>, @@ -2098,7 +2102,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <0 300000000>; status = "disabled"; }; |