diff options
| author | Michael Grzeschik <[email protected]> | 2022-11-14 19:59:23 +0100 |
|---|---|---|
| committer | Claudiu Beznea <[email protected]> | 2022-11-17 15:23:50 +0200 |
| commit | 40a2226e8bfacb79dd154dea68febeead9d847e9 (patch) | |
| tree | a586e581c598c95c7418e2d8b2bd5c63ee61f904 | |
| parent | cef8cdc0d0e7c701fe4dcfba4ed3fd25d28a6020 (diff) | |
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
We set the PIOC to GPIO mode. This way the pin becomes an
input signal will be usable by the controller. Without
this change the udc on the 9g20ek does not work.
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support")
Signed-off-by: Michael Grzeschik <[email protected]>
Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
| -rw-r--r-- | arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 60d61291f344..024af2db638e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -84,6 +91,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; |