media: staging: media: atomisp: replace raw pr_*() by dev_dbg()

It is recommended to use driver model diagnostic macros dev_*() instead
of raw printk() or pr_*() since the former ensures that the log messages
are always associated with the corresponding device and driver. This also
addresses the checkpatch complain for not using KERN_<LEVEL> facility in
printk() call.

Suggested-by: Fabio Aiuto <[email protected]>
Signed-off-by: Deepak R Varma <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

1 files changed, 15 insertions, 15 deletions

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
index d170d0adfea4..e1de3cf68893 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
@@ -300,7 +300,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 	/* pixel clock calculattion */
 	dev->vt_pix_clk_freq_mhz = 14400000; // 16.8MHz
 	buf->vt_pix_clk_freq_mhz = dev->vt_pix_clk_freq_mhz;
-	pr_info("vt_pix_clk_freq_mhz=%d\n", buf->vt_pix_clk_freq_mhz);
+	dev_dbg(&client->dev, "vt_pix_clk_freq_mhz=%d\n", buf->vt_pix_clk_freq_mhz);
 
 	/* get integration time */
 	buf->coarse_integration_time_min = GC0310_COARSE_INTG_TIME_MIN;
@@ -326,7 +326,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 	if (ret)
 		return ret;
 	buf->crop_horizontal_start = val | (reg_val & 0xFF);
-	pr_info("crop_horizontal_start=%d\n", buf->crop_horizontal_start);
+	dev_dbg(&client->dev, "crop_horizontal_start=%d\n", buf->crop_horizontal_start);
 
 	/* Getting crop_vertical_start */
 	ret =  gc0310_read_reg(client, GC0310_8BIT,
@@ -339,7 +339,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 	if (ret)
 		return ret;
 	buf->crop_vertical_start = val | (reg_val & 0xFF);
-	pr_info("crop_vertical_start=%d\n", buf->crop_vertical_start);
+	dev_dbg(&client->dev, "crop_vertical_start=%d\n", buf->crop_vertical_start);
 
 	/* Getting output_width */
 	ret = gc0310_read_reg(client, GC0310_8BIT,
@@ -352,7 +352,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 	if (ret)
 		return ret;
 	buf->output_width = val | (reg_val & 0xFF);
-	pr_info("output_width=%d\n", buf->output_width);
+	dev_dbg(&client->dev, "output_width=%d\n", buf->output_width);
 
 	/* Getting output_height */
 	ret = gc0310_read_reg(client, GC0310_8BIT,
@@ -365,12 +365,12 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 	if (ret)
 		return ret;
 	buf->output_height = val | (reg_val & 0xFF);
-	pr_info("output_height=%d\n", buf->output_height);
+	dev_dbg(&client->dev, "output_height=%d\n", buf->output_height);
 
 	buf->crop_horizontal_end = buf->crop_horizontal_start + buf->output_width - 1;
 	buf->crop_vertical_end = buf->crop_vertical_start + buf->output_height - 1;
-	pr_info("crop_horizontal_end=%d\n", buf->crop_horizontal_end);
-	pr_info("crop_vertical_end=%d\n", buf->crop_vertical_end);
+	dev_dbg(&client->dev, "crop_horizontal_end=%d\n", buf->crop_horizontal_end);
+	dev_dbg(&client->dev, "crop_vertical_end=%d\n", buf->crop_vertical_end);
 
 	/* Getting line_length_pck */
 	ret = gc0310_read_reg(client, GC0310_8BIT,
@@ -389,7 +389,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 		return ret;
 	sh_delay = reg_val;
 	buf->line_length_pck = buf->output_width + hori_blanking + sh_delay + 4;
-	pr_info("hori_blanking=%d sh_delay=%d line_length_pck=%d\n", hori_blanking,
+	dev_dbg(&client->dev, "hori_blanking=%d sh_delay=%d line_length_pck=%d\n", hori_blanking,
 		sh_delay, buf->line_length_pck);
 
 	/* Getting frame_length_lines */
@@ -404,7 +404,7 @@ static int gc0310_get_intg_factor(struct i2c_client *client,
 		return ret;
 	vert_blanking = val | (reg_val & 0xFF);
 	buf->frame_length_lines = buf->output_height + vert_blanking;
-	pr_info("vert_blanking=%d frame_length_lines=%d\n", vert_blanking,
+	dev_dbg(&client->dev, "vert_blanking=%d frame_length_lines=%d\n", vert_blanking,
 		buf->frame_length_lines);
 
 	buf->binning_factor_x = res->bin_factor_x ?
@@ -434,7 +434,7 @@ static int gc0310_set_gain(struct v4l2_subdev *sd, int gain)
 		dgain = gain / 2;
 	}
 
-	pr_info("gain=0x%x again=0x%x dgain=0x%x\n", gain, again, dgain);
+	dev_dbg(&client->dev, "gain=0x%x again=0x%x dgain=0x%x\n", gain, again, dgain);
 
 	/* set analog gain */
 	ret = gc0310_write_reg(client, GC0310_8BIT,
@@ -458,7 +458,7 @@ static int __gc0310_set_exposure(struct v4l2_subdev *sd, int coarse_itg,
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret;
 
-	pr_info("coarse_itg=%d gain=%d digitgain=%d\n", coarse_itg, gain, digitgain);
+	dev_dbg(&client->dev, "coarse_itg=%d gain=%d digitgain=%d\n", coarse_itg, gain, digitgain);
 
 	/* set exposure */
 	ret = gc0310_write_reg(client, GC0310_8BIT,
@@ -1020,8 +1020,8 @@ static int gc0310_set_fmt(struct v4l2_subdev *sd,
 		return -EINVAL;
 	}
 
-	printk("%s: before gc0310_write_reg_array %s\n", __func__,
-	       gc0310_res[dev->fmt_idx].desc);
+	dev_dbg(&client->dev, "%s: before gc0310_write_reg_array %s\n",
+		__func__, gc0310_res[dev->fmt_idx].desc);
 	ret = startup(sd);
 	if (ret) {
 		dev_err(&client->dev, "gc0310 startup err\n");
@@ -1085,7 +1085,7 @@ static int gc0310_detect(struct i2c_client *client)
 		return -ENODEV;
 	}
 	id = ((((u16)high) << 8) | (u16)low);
-	pr_info("sensor ID = 0x%x\n", id);
+	dev_dbg(&client->dev, "sensor ID = 0x%x\n", id);
 
 	if (id != GC0310_ID) {
 		dev_err(&client->dev, "sensor ID error, read id = 0x%x, target id = 0x%x\n", id,
@@ -1106,7 +1106,7 @@ static int gc0310_s_stream(struct v4l2_subdev *sd, int enable)
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret;
 
-	pr_info("%s S enable=%d\n", __func__, enable);
+	dev_dbg(&client->dev, "%s S enable=%d\n", __func__, enable);
 	mutex_lock(&dev->input_lock);
 
 	if (enable) {