diff options
| author | Bhupesh Sharma <[email protected]> | 2023-03-14 13:10:01 +0530 |
|---|---|---|
| committer | Bjorn Andersson <[email protected]> | 2023-03-19 19:12:35 -0700 |
| commit | 27ad7815cb70cbfdcbee4368f41033e83731479f (patch) | |
| tree | df785148b111b9a36d5a573f84bedde57f5443aa | |
| parent | 1f1e512288edf0ef99d9ceb9af29e2e004341ced (diff) | |
arm64: dts: qcom: sm6115: Move SDHC node(s)'s 'pinctrl' properties to dts
Normally the 'pinctrl' properties of a SDHC controller and the
chip detect pin settings are dependent on the type of the slots
(for e.g uSD card slot), regulators and GPIO(s) available on the
board(s).
So, move the same from the sm6115 dtsi file to the respective
board file(s).
Reviewed-by: Marijn Suijten <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 10 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6115.dtsi | 22 |
2 files changed, 10 insertions, 22 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index 3f39f25e0721..a1f0622db5a0 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -202,12 +202,22 @@ vqmmc-supply = <&vreg_l5a>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; status = "okay"; }; &tlmm { gpio-reserved-ranges = <14 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index fdad0f13e064..840a453f1f14 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -603,13 +603,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off-state { @@ -630,13 +623,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -739,10 +725,6 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; - pinctrl-0 = <&sdc1_state_on>; - pinctrl-1 = <&sdc1_state_off>; - pinctrl-names = "default", "sleep"; - bus-width = <8>; status = "disabled"; }; @@ -761,10 +743,6 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; - pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; |