diff options
| author | Alexandre Courbot <[email protected]> | 2015-07-01 18:13:47 +0900 |
|---|---|---|
| committer | Thierry Reding <[email protected]> | 2015-08-21 18:44:27 +0200 |
| commit | 21fa196fc0f4b79abb923042cb89651ca47b4b92 (patch) | |
| tree | 504bacb1c3a8d17671b41fdc27236b65f07caac0 | |
| parent | e34cc1b6b7115de2320c2acdb62c82ebeb502c01 (diff) | |
ARM: tegra: jetson-tk1: Add GK20A GPU DT node
Add the device-tree node for the GK20A GPU and leave it disabled.
It is the responsibility of the bootloader to enable it if the
VPR registers have been programmed such that the GPU can operate.
Signed-off-by: Alexandre Courbot <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
| -rw-r--r-- | arch/arm/boot/dts/tegra124-jetson-tk1.dts | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ce5961cd0b77..66b4451eb2ca 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -53,6 +53,14 @@ }; }; + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux@0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1514,7 +1522,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; |