PCI: dwc/imx6: Use common PCI register definitions

The i.MX6 driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Richard Zhu <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>

1 files changed, 14 insertions, 23 deletions

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 2b075a468104..9f6018d3d338 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -94,15 +94,6 @@ struct imx6_pcie {
 #define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
 #define PHY_PLL_LOCK_WAIT_TIMEOUT	(2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX)
 
-/* PCIe Root Complex registers (memory-mapped) */
-#define PCIE_RC_IMX6_MSI_CAP			0x50
-#define PCIE_RC_LCR				0x7c
-#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1	0x1
-#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2	0x2
-#define PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK	0xf
-
-#define PCIE_RC_LCSR				0x80
-
 /* PCIe Port Logic registers (memory-mapped) */
 #define PL_OFFSET 0x700
 
@@ -759,6 +750,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
+	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 tmp;
 	int ret;
 
@@ -767,10 +759,10 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	 * started in Gen2 mode, there is a possibility the devices on the
 	 * bus will not be detected at all.  This happens with PCIe switches.
 	 */
-	tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
-	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
-	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
-	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
+	tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+	tmp &= ~PCI_EXP_LNKCAP_SLS;
+	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
 
 	/* Start LTSSM. */
 	imx6_pcie_ltssm_enable(dev);
@@ -781,10 +773,10 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 
 	if (imx6_pcie->link_gen == 2) {
 		/* Allow Gen2 mode after the link is up. */
-		tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
-		tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
-		tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
-		dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
+		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+		tmp &= ~PCI_EXP_LNKCAP_SLS;
+		tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
+		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
 
 		/*
 		 * Start Directed Speed Change so the best possible
@@ -822,8 +814,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 		dev_info(dev, "Link: Gen2 disabled\n");
 	}
 
-	tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);
-	dev_info(dev, "Link up, Gen%i\n", (tmp >> 16) & 0xf);
+	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
+	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
 
 err_reset_phy:
@@ -1184,11 +1176,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 		return ret;
 
 	if (pci_msi_enabled()) {
-		val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
-					PCI_MSI_FLAGS);
+		u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
+		val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
 		val |= PCI_MSI_FLAGS_ENABLE;
-		dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP + PCI_MSI_FLAGS,
-				   val);
+		dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
 	}
 
 	return 0;