diff options
| author | Arnd Bergmann <[email protected]> | 2017-03-31 12:02:22 +0200 |
|---|---|---|
| committer | Arnd Bergmann <[email protected]> | 2017-03-31 12:02:22 +0200 |
| commit | 1b18832977557a4f326d70c0ff8d6a65c023e807 (patch) | |
| tree | c8780a2acf014139bc5d32921981fcf231f9f4f7 | |
| parent | b916a60994bb77dcc83826c1d18ccf18ff307914 (diff) | |
| parent | 414ce21ae20547e0eea72fe0c4e8ee3280d30888 (diff) | |
Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
ARM: dts: bcm: fix msi-controller name and unit address
ARM: dts: BCM53573: Specify serial console parameters
ARM: dts: BCM5301X: Specify serial console params in dtsi files
ARM: dts: NSP: Add crypto (SPU) to dtsi
ARM: dts: NSP: Add mailbox (PDC) to NSP
ARM: dts: BCM953012HR: Add ethernet aliases
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
ARM: dts: NSP: disable i2c DT entry by default
ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
ARM: dts: BCM5301X: Add I2C support to the DT
ARM: dts: BCM5301X: Add TWD WD Support to DT
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: bcm2835: add sdhost controller to devicetree
ARM: dts: bcm283x: Add HDMI audio related properties
ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
ARM: dts: bcm2835: Add the DSI module nodes and clocks.
ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
...
44 files changed, 814 insertions, 167 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 47048c42d402..93a572936292 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-linksys-ea6300-v1.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ @@ -87,17 +88,21 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm47081-luxul-xap-1410.dtb \ bcm47081-luxul-xwr-1200.dtb \ + bcm47081-tplink-archer-c5-v2.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-linksys-ea9200.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ + bcm47094-linksys-panamera.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ + bcm953012hr.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_53573) += \ bcm47189-tenda-ac9.dtb diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 8833a4c3cd96..9644fddb5e3c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -205,7 +205,7 @@ status = "disabled"; msi-parent = <&msi0>; - msi0: msi@18012000 { + msi0: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -240,7 +240,7 @@ status = "disabled"; msi-parent = <&msi1>; - msi1: msi@18013000 { + msi1: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 832795b0fd0f..fe6cba994a97 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -245,6 +245,15 @@ status = "disabled"; }; + mailbox: mailbox@25000 { + compatible = "brcm,iproc-fa2-mbox"; + reg = <0x25000 0x445>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -288,6 +297,12 @@ #size-cells = <0>; }; + crypto@2f000 { + compatible = "brcm,spum-nsp-crypto"; + reg = <0x2f000 0x900>; + mboxes = <&mailbox 0>; + }; + gpiob: gpio@30000 { compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; reg = <0x30000 0x50>; @@ -306,6 +321,20 @@ status = "disabled"; }; + ehci0: usb@2a000 { + compatible = "generic-ehci"; + reg = <0x2a000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@2b000 { + compatible = "generic-ohci"; + reg = <0x2b000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -347,6 +376,7 @@ #size-cells = <0>; interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; clock-frequency = <100000>; + status = "disabled"; }; watchdog@39000 { @@ -450,7 +480,7 @@ status = "disabled"; msi-parent = <&msi0>; - msi0: msi@18012000 { + msi0: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -486,7 +516,7 @@ status = "disabled"; msi-parent = <&msi1>; - msi1: msi@18013000 { + msi1: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -522,7 +552,7 @@ status = "disabled"; msi-parent = <&msi2>; - msi2: msi@18014000 { + msi2: msi-controller { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 38e6050035bc..a7b5ce133784 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -69,6 +69,12 @@ bus-width = <4>; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; @@ -92,3 +98,11 @@ power-domains = <&power RPI_POWER_DOMAIN_VEC>; status = "okay"; }; + +&dsi0 { + power-domains = <&power RPI_POWER_DOMAIN_DSI0>; +}; + +&dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index a3106aa446c6..35cea3fcaf5c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -93,10 +93,13 @@ #clock-cells = <1>; reg = <0x7e101000 0x2000>; - /* CPRMAN derives everything from the platform's - * oscillator. + /* CPRMAN derives almost everything from the + * platform's oscillator. However, the DSI + * pixel clocks come from the DSI analog PHY. */ - clocks = <&clk_osc>; + clocks = <&clk_osc>, + <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, + <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; }; rng@7e104000 { @@ -347,6 +350,16 @@ arm,primecell-periphid = <0x00241011>; }; + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + status = "disabled"; + }; + i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x20>, @@ -390,6 +403,25 @@ interrupts = <2 14>; /* pwa1 */ }; + dsi0: dsi@7e209000 { + compatible = "brcm,bcm2835-dsi0"; + reg = <0x7e209000 0x78>; + interrupts = <2 4>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLA_DSI0>, + <&clocks BCM2835_CLOCK_DSI0E>, + <&clocks BCM2835_CLOCK_DSI0P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi0_byte", + "dsi0_ddr2", + "dsi0_ddr"; + + }; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; @@ -456,6 +488,26 @@ interrupts = <2 1>; }; + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr"; + + status = "disabled"; + }; + i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; @@ -499,6 +551,8 @@ clocks = <&clocks BCM2835_PLLH_PIX>, <&clocks BCM2835_CLOCK_HSM>; clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index d241cee4bfcc..4175174e589a 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,19 +41,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -61,14 +68,12 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index b0e62042f62f..8fa033fea959 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,7 +41,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -49,7 +58,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index c9ba6b964b38..62e1427b3f10 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,13 +52,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power1 { @@ -76,7 +74,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -88,13 +85,11 @@ wireless0 { label = "bcm53xx:blue:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts new file mode 100644 index 000000000000..126ab5867772 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <[email protected]> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6300-v1", "brcm,bcm4708"; + model = "Linksys EA6300 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index b9f66c0fae27..a5647efe4118 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -43,19 +43,16 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index ae0199f6c7a2..bb66cebe0bd8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,7 +47,6 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power1 { @@ -49,13 +58,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 36b628b190d7..19ee924d7d53 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -37,61 +37,51 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-red { label = "bcm53xx:red:status"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-green { label = "bcm53xx:green:status"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-blue { label = "bcm53xx:blue:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-red { label = "bcm53xx:red:wan"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index d0eec099f1f8..1a19e97a987d 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -12,6 +12,14 @@ / { compatible = "brcm,bcm4708"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index db8608be0ee7..0800a964f2fe 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,7 +47,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { @@ -55,7 +64,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d51586d95b9a..c2af33eb47de 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2014 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -58,7 +68,6 @@ power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router0 { @@ -70,7 +79,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -82,13 +90,11 @@ wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index de041b8c3342..8bef6429feee 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts new file mode 100644 index 000000000000..a854a5174b7f --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <[email protected]> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708"; + model = "TP-LINK Archer C5 V2"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "bcm53xx:green:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + + usb2-port1 { + label = "bcm53xx:green:usb2-port1"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wan-green { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "bcm53xx:green:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + usb2-port2 { + label = "bcm53xx:green:usb2-port2"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index c5f7619af4a6..9829d044aaf4 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -4,7 +4,17 @@ * * Copyright © 2014 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ #include "bcm5301x.dtsi" @@ -12,6 +22,14 @@ / { compatible = "brcm,bcm47081"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index eaca6876db0f..df473cc41572 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -31,7 +41,6 @@ wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -43,7 +52,6 @@ wan { label = "bcm53xx:red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index b32957ca9443..92058c73ee59 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -31,13 +31,11 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-white { @@ -49,37 +47,31 @@ router-amber { label = "bcm53xx:amber:router"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router-white { label = "bcm53xx:white:router"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-amber { label = "bcm53xx:amber:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-white { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts new file mode 100644 index 000000000000..3d1d9c2c4efc --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <[email protected]> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708"; + model = "Linksys EA9200"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index f459a98a72c6..f43ab4721456 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,43 +47,36 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 8e39a84e5bf9..d266131652ad 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2015 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -28,58 +38,61 @@ leds { compatible = "gpio-leds"; - power0 { + power-white { label = "bcm53xx:white:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; }; - power1 { + power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; @@ -105,6 +118,12 @@ linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c67bfaa0c8e8..97aa5d59a1d8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -26,49 +26,41 @@ lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-blue { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 64ded7643e9f..51b0641b5f79 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -4,7 +4,17 @@ * * Copyright (C) 2016 Rafał Miłecki <[email protected]> * - * Licensed under the GNU/GPL. See COPYING for details. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -46,37 +56,31 @@ wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts new file mode 100644 index 000000000000..b6750f70dffb --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <[email protected]> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708"; + model = "Linksys EA9500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 5cf4ab1ebe85..5f8621d00c50 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -34,37 +34,31 @@ lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; status { @@ -76,13 +70,11 @@ 2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 600795ee1aed..859929973158 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -34,37 +34,31 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 4403ae8790c2..34417dac1cd0 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -26,19 +26,16 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -48,6 +45,15 @@ }; }; + pcie0_leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -72,3 +78,30 @@ }; }; }; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 4fbb089cf5ad..acee36a61004 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -18,10 +18,6 @@ / { interrupt-parent = <&gic>; - chosen { - stdout-path = &uart0; - }; - chipcommonA { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; @@ -66,14 +62,23 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; - local-timer@20600 { + timer@20600 { compatible = "arm,cortex-a9-twd-timer"; - reg = <0x20600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -298,20 +303,6 @@ }; }; - spi@29000 { - reg = <0x00029000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - spi_nor: spi-nor@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - linux,part-probe = "ofpart", "bcm47xxpart"; - status = "disabled"; - }; - }; - gmac0: ethernet@24000 { reg = <0x24000 0x800>; }; @@ -329,6 +320,16 @@ }; }; + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; + interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "disabled"; + }; + lcpll0: lcpll0@1800c100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; @@ -375,4 +376,40 @@ brcm,nand-has-wp; }; + + spi@18029200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x18029200 0x184>, + <0x18029000 0x124>, + <0x1811b408 0x004>, + <0x180293a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + spi_nor: spi-nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + linux,part-probe = "ofpart", "bcm47xxpart"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 2da04d0a7348..eae623f76401 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -13,8 +13,12 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + }; + chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; cpus { @@ -113,6 +117,10 @@ }; }; + pcie0: pcie@2000 { + reg = <0x00002000 0x1000>; + }; + usb2: usb2@4000 { reg = <0x4000 0x1000>; ranges; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 42855a7c1bfa..2e08c895f281 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 95e8be65f2f1..c37616c67edc 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index decd86bae901..40e694bfe5ca 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -39,14 +39,6 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts new file mode 100644 index 000000000000..3076e81699cf --- /dev/null +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -0,0 +1,97 @@ +/* + * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright(c) 2017 Broadcom + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its contributors + * may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + model = "NorthStar HR (BCM953012HR)"; + compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + }; +}; + +&nandcs { + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index bfd923096a8c..fbc6219e977a 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -43,15 +43,69 @@ serial1 = &uart1; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x10000000>; }; }; +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; + &uart0 { clock-frequency = <62499840>; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 3f04a40eb90c..3c423840472f 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -59,7 +59,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -69,6 +69,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -107,6 +111,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 9fd542200d3d..9030771a1347 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -59,7 +59,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -69,6 +69,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -107,6 +111,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 41e7fd350fcd..75a88324ccae 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -65,7 +65,13 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { + status = "okay"; + temperature-sensor@4c { compatible = "adi,adt7461a"; reg = <0x4c>; @@ -121,6 +127,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 477c4860db52..98839a3d9969 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -59,7 +59,7 @@ }; }; -/* USB 2/3 and SLIC support needed to be complete */ +/* USB 3 and SLIC support needed to be complete */ &amac0 { status = "okay"; @@ -73,6 +73,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -111,6 +115,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c0a499d5ba44..54ddb6973c86 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -59,7 +59,7 @@ }; }; -/* USB 2/3 and SLIC support needed to be complete */ +/* USB 3 and SLIC support needed to be complete */ &amac0 { status = "okay"; @@ -73,6 +73,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -111,6 +115,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index f7eb5854a224..9673710861ff 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -71,6 +71,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -109,6 +113,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index f8d47e517e18..64740f85cf4c 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -103,6 +107,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 16666324fda8..5dea5657e762 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -59,7 +59,7 @@ }; }; -/* USB 2/3 support needed to be complete */ +/* USB 3 support needed to be complete */ &amac0 { status = "okay"; @@ -73,6 +73,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -111,6 +115,10 @@ }; }; +&ohci0 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; |