pinctrl: rockchip: Add rv1108 recalculated iomux support

The pins from GPIO1A0 to GPIO1B1 are special, need to recalculate
iomux. And the register offset is larger than the u8 range, so changed
to u32.

Signed-off-by: David Wu <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

1 files changed, 67 insertions, 1 deletions

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index c6f472e1bca6..b5cb7858ffdc 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -301,7 +301,7 @@ struct rockchip_pin_bank {
 struct rockchip_mux_recalced_data {
 	u8 num;
 	u8 pin;
-	u8 reg;
+	u32 reg;
 	u8 bit;
 	u8 mask;
 };
@@ -558,6 +558,70 @@ static const struct pinctrl_ops rockchip_pctrl_ops = {
  * Hardware access
  */
 
+static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = {
+	{
+		.num = 1,
+		.pin = 0,
+		.reg = 0x418,
+		.bit = 0,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 1,
+		.reg = 0x418,
+		.bit = 2,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 2,
+		.reg = 0x418,
+		.bit = 4,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 3,
+		.reg = 0x418,
+		.bit = 6,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 4,
+		.reg = 0x418,
+		.bit = 8,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 5,
+		.reg = 0x418,
+		.bit = 10,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 6,
+		.reg = 0x418,
+		.bit = 12,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 7,
+		.reg = 0x418,
+		.bit = 14,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 8,
+		.reg = 0x41c,
+		.bit = 0,
+		.mask = 0x3
+	}, {
+		.num = 1,
+		.pin = 9,
+		.reg = 0x41c,
+		.bit = 2,
+		.mask = 0x3
+	},
+};
+
 static  struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
 	{
 		.num = 2,
@@ -3162,6 +3226,8 @@ static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
 	.type			= RV1108,
 	.grf_mux_offset		= 0x10,
 	.pmu_mux_offset		= 0x0,
+	.iomux_recalced		= rv1108_mux_recalced_data,
+	.niomux_recalced	= ARRAY_SIZE(rv1108_mux_recalced_data),
 	.pull_calc_reg		= rv1108_calc_pull_reg_and_bit,
 	.drv_calc_reg		= rv1108_calc_drv_reg_and_bit,
 	.schmitt_calc_reg	= rv1108_calc_schmitt_reg_and_bit,