1256537 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Subbaraya Sundeep
|
a88e0f936b |
octeontx2: Detect the mbox up or down message via register
A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.
Fixes:
|
||
Jakub Kicinski
|
94e3ca2fef |
ipsec-2024-03-19
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmX5b3MACgkQrB3Eaf9P W7dqhA/9Gxdwp4PawUhSpH3bOmzH+St13kxkq043FIGsvGEnYPGDzirpfi8mYQe9 TPnjOrZegYIQPnAbv/EXxV5474d+E8a3sEkhO7djEyZKHeBIiRjpv+lv0XxBZSpo LgLkBX3hW1BDtdc/YBLCBt6jO9kYr7/NU2dBZ3eSCImrP7UHUIR3XV0bF3jf1vfl /7Md3z3nyAr9DmolSvklp6uO4Gxz+LRuZvs1BqrdY4SqAWRY5IZDKiou0u60kcDM KhUvqSxKA5GxxEWdc1AvKYwIulOniqpn4uqJSem2Td8HYxjXFJ5mweNcE7t6+f+v zccFHsNVjPZJKh2RXYeLOvemrWvsG52qWOdVGI++P7XkuciuinTiP63QWqAhFVLD 0AyiHtOMxLhCWLNadpX8u8x+NzWrDdSApyqX+vODwdXSBkPa5peRlgxmX9iYYni4 Lb3AXVcnxLfo1Mseh9AOsRDOan4JXwa8IcnWBOoRa1FXq0v5SDm02S+NdMNulIw9 eUMLPc524UwhaycidPIS9vISbx5EUDeCPp8n7rKaim6bm876ixRy9Aysk9zo4ens rVlI/av7g2y5cCzooEp3dVM9T2tS2LtuGpErJ0Bp9oZWiSOm5Y2QJAtfLzolgEeo yL72lF5tBITb35/Iv+qIWxbIVAv8O782NtEyovq8maS8R+avltw= =scKE -----END PGP SIGNATURE----- Merge tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2024-03-19 1) Fix possible page_pool leak triggered by esp_output. From Dragos Tatulea. 2) Fix UDP encapsulation in software GSO path. From Leon Romanovsky. * tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Allow UDP encapsulation only in offload modes net: esp: fix bad handling of pages from page_pool ==================== Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jiri Pirko
|
78a2f5e6c1 |
devlink: fix port new reply cmd type
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes:
|
||
Kuniyuki Iwashima
|
956c0d6191 |
tcp: Clear req->syncookie in reqsk_alloc().
syzkaller reported a read of uninit req->syncookie. [0] Originally, req->syncookie was used only in tcp_conn_request() to indicate if we need to encode SYN cookie in SYN+ACK, so the field remains uninitialised in other places. The commit |
||
Thinh Tran
|
d27e2da94a |
net/bnx2x: Prevent access to a freed page in page_pool
Fix race condition leading to system crash during EEH error handling
During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()
799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800 struct bnx2x_fastpath *fp, u16 index)
801 {
802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803 struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.
EEH: Beginning: 'slot_reset'
PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000025065fc
Oops: Kernel access of bad area, sig: 11 [#1]
.....
Call Trace:
[c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
[c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
[c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
[c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
[c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
[c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
[c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
To solve this issue, we need to verify page pool allocations before
freeing.
Fixes:
|
||
Nikita Kiryushin
|
32fa4366cc |
net: phy: fix phy_read_poll_timeout argument type in genphy_loopback
read_poll_timeout inside phy_read_poll_timeout can set val negative in some cases (for example, __mdiobus_read inside phy_read can return -EOPNOTSUPP). Supposedly, commit |
||
Michal Koutný
|
9474c62ab6 |
net/sched: Add module alias for sch_fq_pie
The commit |
||
Tobias Brunner
|
c9b3b81716 |
ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels
Since the referenced commit, the xfrm_inner_extract_output() function uses the protocol field to determine the address family. So not setting it for IPv4 raw sockets meant that such packets couldn't be tunneled via IPsec anymore. IPv6 raw sockets are not affected as they already set the protocol since |
||
Felix Maurer
|
3cf28cd492 |
hsr: Handle failures in module init
A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.
Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.
Fixes:
|
||
Yewon Choi
|
1422f28826 |
rds: introduce acquire/release ordering in acquire/release_in_xmit()
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they are expected to ensure acquire/release memory ordering semantics. However, test_and_set_bit/clear_bit() don't imply such semantics, on top of this, following smp_mb__after_atomic() does not guarantee release ordering (memory barrier actually should be placed before clear_bit()). Instead, we use clear_bit_unlock/test_and_set_bit_lock() here. Fixes: |
||
Jakub Kicinski
|
9966e329d6 |
tools: ynl: add header guards for nlctrl
I "extracted" YNL C into a GitHub repo to make it easier to use in other projects: https://github.com/linux-netdev/ynl-c GitHub actions use Ubuntu by default, and the kernel headers there are missing |
||
Paolo Abeni
|
710fe438e3 |
Merge branch 'wireguard-fixes-for-6-9-rc1'
Jason A. Donenfeld says: ==================== wireguard fixes for 6.9-rc1 This series has four WireGuard fixes: 1) Annotate a data race that KCSAN found by using READ_ONCE/WRITE_ONCE, which has been causing syzkaller noise. 2) Use the generic netdev tstats allocation and stats getters instead of doing this within the driver. 3) Explicitly check a flag variable instead of an empty list in the netlink code, to prevent a UaF situation when paging through GET results during a remove-all SET operation. 4) Set a flag in the RISC-V CI config so the selftests continue to boot. ==================== Link: https://lore.kernel.org/r/20240314224911.6653-1-Jason@zx2c4.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jason A. Donenfeld
|
e995f5dd9a |
wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64}
This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.
Cc: stable@vger.kernel.org
Fixes:
|
||
Jason A. Donenfeld
|
71cbd32e3d |
wireguard: netlink: access device through ctx instead of peer
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.
Cc: stable@vger.kernel.org
Fixes:
|
||
Jason A. Donenfeld
|
55b6c73867 |
wireguard: netlink: check for dangling peer via is_dead instead of empty list
If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.
Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.
It can be reproduced by a small script like:
echo "Setting config..."
ip link add dev wg0 type wireguard
wg setconf wg0 /big-config
(
while true; do
echo "Showing config..."
wg showconf wg0 > /dev/null
done
) &
sleep 4
wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")
Resulting in:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
Read of size 8 at addr ffff88811956ec70 by task wg/59
CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
print_address_description.constprop.0+0x2c/0x380
print_report+0xab/0x250
kasan_report+0xba/0xf0
__lock_acquire+0x182a/0x1b20
lock_acquire+0x191/0x4b0
down_read+0x80/0x440
get_peer+0x140/0xcb0
wg_get_device_dump+0x471/0x1130
Cc: stable@vger.kernel.org
Fixes:
|
||
Breno Leitao
|
df9bbb5e77 |
wireguard: device: remove generic .ndo_get_stats64
Commit
|
||
Breno Leitao
|
db2952dfbd |
wireguard: device: leverage core stats allocator
With commit
|
||
Nikita Zhandarovich
|
bba045dc4d |
wireguard: receive: annotate data-race around receiving_counter.counter
Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.
BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll
write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
counter_validate drivers/net/wireguard/receive.c:321 [inline]
wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
__napi_poll+0x60/0x3b0 net/core/dev.c:6536
napi_poll net/core/dev.c:6605 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6738
__do_softirq+0xc4/0x279 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
process_one_work kernel/workqueue.c:2633 [inline]
...
read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
...
Fixes:
|
||
Eric Dumazet
|
f6e0a4984c |
net: move dev->state into net_device_read_txrx group
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes:
|
||
Abhishek Chauhan
|
35c3e27917 |
Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets"
This reverts commit |
||
Arınç ÜNAL
|
f490c492e9 |
net: dsa: mt7530: prevent possible incorrect XTAL frequency selection
On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit value that represents the frequency of the crystal oscillator connected to the switch IC. The field is populated by the state of the ESW_P4_LED_0 and ESW_P4_LED_0 pins, which is done right after reset is deasserted. ESW_P4_LED_0 ESW_P3_LED_0 Frequency ----------------------------------------- 0 0 Reserved 0 1 20MHz 1 0 40MHz 1 1 25MHz On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0 pin is used to populate the bit. 25MHz when the pin is high, 40MHz when it's low. These pins are also used with LEDs, therefore, their state can be set to something other than the bootstrapping configuration. For example, a link may be established on port 3 before the DSA subdriver takes control of the switch which would set ESW_P3_LED_0 to high. Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is described between reset assertion and deassertion. Some switch ICs in real life conditions cannot always have these pins set back to the bootstrapping configuration before reset deassertion in this amount of delay. This causes wrong crystal frequency to be selected which puts the switch in a nonfunctional state after reset deassertion. The tests below are conducted on an MT7530 with a 40MHz crystal oscillator by Justin Swartz. With a cable from an active peer connected to port 3 before reset, an incorrect crystal frequency (0b11 = 25MHz) is selected: [1] [3] [5] : : : _____________________________ __________________ ESW_P4_LED_0 |_______| _____________________________ ESW_P3_LED_0 |__________________________ : : : : : : [4]...: : : [2]................: [1] Reset is asserted. [2] Period of 1000 - 1100 usec. [3] Reset is deasserted. [4] Period of 315 usec. HWTRAP register is populated with incorrect XTAL frequency. [5] Signals reflect the bootstrapped configuration. Increase the delay between reset_control_assert() and reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount ensures a higher possibility that the switch IC will have these pins back to the bootstrapping configuration before reset deassertion. With a cable from an active peer connected to port 3 before reset, the correct crystal frequency (0b10 = 40MHz) is selected: [1] [2-1] [3] [5] : : : : _____________________________ __________________ ESW_P4_LED_0 |_______| ___________________ _______ ESW_P3_LED_0 |_________| |__________________ : : : : : : [2-2]...: [4]...: [2]................: [1] Reset is asserted. [2] Period of 5000 - 5100 usec. [2-1] ESW_P3_LED_0 goes low. [2-2] Remaining period of 5000 - 5100 usec. [3] Reset is deasserted. [4] Period of 310 usec. HWTRAP register is populated with bootstrapped XTAL frequency. [5] Signals reflect the bootstrapped configuration. ESW_P3_LED_0 low period before reset deassertion: 5000 usec - 5100 usec TEST RESET HOLD # (usec) --------------------- 1 5410 2 5440 3 4375 4 5490 5 5475 6 4335 7 4370 8 5435 9 4205 10 4335 11 3750 12 3170 13 4395 14 4375 15 3515 16 4335 17 4220 18 4175 19 4175 20 4350 Min 3170 Max 5490 Median 4342.500 Avg 4466.500 Revert commit |
||
David S. Miller
|
ba77f6e20d |
Merge branch 'veth-xdp-gro'
Ignat Korchagin says: ==================== net: veth: ability to toggle GRO and XDP independently It is rather confusing that GRO is automatically enabled, when an XDP program is attached to a veth interface. Moreover, it is not possible to disable GRO on a veth, if an XDP program is attached (which might be desirable in some use cases). Make GRO and XDP independent for a veth interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ignat Korchagin
|
ba5a6476e3 |
selftests: net: veth: test the ability to independently manipulate GRO and XDP
We should be able to independently flip either XDP or GRO states and toggling one should not affect the other. Adjust other tests as well that had implicit expectation that GRO would be automatically enabled. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ignat Korchagin
|
d7db7775ea |
net: veth: do not manipulate GRO when using XDP
Commit |
||
Leon Romanovsky
|
773bb766ca |
xfrm: Allow UDP encapsulation only in offload modes
The missing check of x->encap caused to the situation where GSO packets
were created with UDP encapsulation.
As a solution return the encap check for non-offloaded SA.
Fixes:
|
||
Dragos Tatulea
|
c3198822c6 |
net: esp: fix bad handling of pages from page_pool
When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.
This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:
BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.
Cc: stable@vger.kernel.org
Fixes:
|
||
Eric Dumazet
|
6ebfad3316 |
packet: annotate data-races around ignore_outgoing
ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt
write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
do_sock_setsockopt net/socket.c:2311 [inline]
__sys_setsockopt+0x1d8/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
do_syscall_64+0xd3/0x1d0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
xmit_one net/core/dev.c:3527 [inline]
dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
__dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
worker_thread+0x526/0x730 kernel/workqueue.c:3416
kthread+0x1d1/0x210 kernel/kthread.c:388
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G W 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Fixes:
|
||
Herve Codina
|
badc9e33c7 |
net: wan: fsl_qmc_hdlc: Fix module compilation
The fsl_qmc_driver does not compile as module: error: ‘qmc_hdlc_driver’ undeclared here (not in a function); 405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver); | ^~~~~~~~~~~~~~~ Fix the typo. Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Closes: https://lore.kernel.org/linux-kernel/87ttl93f7i.fsf@mail.lhotse/ Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Daniel Golle
|
ea80e3ed09 |
net: ethernet: mtk_eth_soc: fix PPE hanging issue
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK: In the mtk_ppe_stop() function, the PPE scan mode is not disabled before disabling the PPE. This can potentially lead to a hang during the process of disabling the PPE. Without this patch, the PPE may experience a hang during the reboot test. Link: |
||
Daniel Golle
|
f1b85ef15a |
net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up
Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.
Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.
Fixes:
|
||
Jens Axboe
|
e54e09c05c |
net: remove {revc,send}msg_copy_msghdr() from exports
The only user of these was io_uring, and it's not using them anymore. Make them static and remove them from the socket header file. Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/1b6089d3-c1cf-464a-abd3-b0f0b6bb2523@kernel.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Duanqiang Wen
|
e30cef001d |
net: txgbe: fix clk_name exceed MAX_DEV_ID limits
txgbe register clk which name is i2c_designware.pci_dev_id(),
clk_name will be stored in clk_lookup_alloc. If PCIe bus number
is larger than 0x39, clk_name size will be larger than 20 bytes.
It exceeds clk_lookup_alloc MAX_DEV_ID limits. So the driver
shortened clk_name.
Fixes:
|
||
Jakub Kicinski
|
1c63686799 |
docs: networking: fix indentation errors in multi-pf-netdev
Stephen reports new warnings in the docs:
Documentation/networking/multi-pf-netdev.rst:94: ERROR: Unexpected indentation.
Documentation/networking/multi-pf-netdev.rst:106: ERROR: Unexpected indentation.
Fixes:
|
||
Paolo Abeni
|
7278c70ab7 |
Merge branch 'rxrpc-fixes-for-af_rxrpc'
David Howells says: ==================== rxrpc: Fixes for AF_RXRPC Here are a couple of fixes for the AF_RXRPC changes[1] in net-next. (1) Fix a runtime warning introduced by a patch that changed how page_frag_alloc_align() works. (2) Fix an is-NULL vs IS_ERR error handling bug. The patches are tagged here: git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git tags/rxrpc-iothread-20240312 And can be found on this branch: http://git.kernel.org/cgit/linux/kernel/git/dhowells/linux-fs.git/log/?h=rxrpc-iothread Link: https://lore.kernel.org/r/20240306000655.1100294-1-dhowells@redhat.com/ [1] ==================== Link: https://lore.kernel.org/r/20240312233723.2984928-1-dhowells@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
David Howells
|
89e4354110 |
rxrpc: Fix error check on ->alloc_txbuf()
rxrpc_alloc_*_txbuf() and ->alloc_txbuf() return NULL to indicate no
memory, but rxrpc_send_data() uses IS_ERR().
Fix rxrpc_send_data() to check for NULL only and set -ENOMEM if it sees
that.
Fixes:
|
||
David Howells
|
6b2536462f |
rxrpc: Fix use of changed alignment param to page_frag_alloc_align()
Commit |
||
Shigeru Yoshida
|
ddbec99f58 |
hsr: Fix uninit-value access in hsr_get_node()
KMSAN reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
fill_frame_info net/hsr/hsr_forward.c:577 [inline]
hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================
If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.
This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag.
Fixes:
|
||
William Tu
|
e127ce7699 |
vmxnet3: Fix missing reserved tailroom
Use rbi->len instead of rcd->len for non-dataring packet.
Found issue:
XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1
RIP: 0010:xdp_warn+0xf/0x20
...
? xdp_warn+0xf/0x20
xdp_do_redirect+0x15f/0x1c0
vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
__napi_poll+0x20/0x180
net_rx_action+0x177/0x390
Reported-by: Martin Zaharinov <micron10@gmail.com>
Tested-by: Martin Zaharinov <micron10@gmail.com>
Link: https://lore.kernel.org/netdev/74BF3CC8-2A3A-44FF-98C2-1E20F110A92E@gmail.com/
Fixes:
|
||
Kuniyuki Iwashima
|
04d9d1fc42 |
tcp: Fix refcnt handling in __inet_hash_connect().
syzbot reported a warning in sk_nulls_del_node_init_rcu(). The commit |
||
Shay Drory
|
d7d7512496 |
devlink: Fix devlink parallel commands processing
Commit |
||
Eric Dumazet
|
343041b59b |
net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check
taprio_parse_tc_entry() is not correctly checking
TCA_TAPRIO_TC_ENTRY_INDEX attribute:
int tc; // Signed value
tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]);
if (tc >= TC_QOPT_MAX_QUEUE) {
NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range");
return -ERANGE;
}
syzbot reported that it could fed arbitary negative values:
UBSAN: shift-out-of-bounds in net/sched/sch_taprio.c:1722:18
shift exponent -2147418108 is negative
CPU: 0 PID: 5066 Comm: syz-executor367 Not tainted 6.8.0-rc7-syzkaller-00136-gc8a5c731fd12 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c7/0x420 lib/ubsan.c:386
taprio_parse_tc_entry net/sched/sch_taprio.c:1722 [inline]
taprio_parse_tc_entries net/sched/sch_taprio.c:1768 [inline]
taprio_change+0xb87/0x57d0 net/sched/sch_taprio.c:1877
taprio_init+0x9da/0xc80 net/sched/sch_taprio.c:2134
qdisc_create+0x9d4/0x1190 net/sched/sch_api.c:1355
tc_modify_qdisc+0xa26/0x1e40 net/sched/sch_api.c:1776
rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6617
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f1b2dea3759
Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd4de452f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1b2def0390 RCX: 00007f1b2dea3759
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000004
RBP: 0000000000000003 R08: 0000555500000000 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007ffd4de45340
R13: 00007ffd4de45310 R14: 0000000000000001 R15: 00007ffd4de45340
Fixes:
|
||
Linu Cherian
|
e642921dfe |
octeontx2-af: Use matching wake_up API variant in CGX command interface
Use wake_up API instead of wake_up_interruptible, since
wait_event_timeout API is used for waiting on command completion.
Fixes:
|
||
Sean Anderson
|
fbec4e7fed |
soc: fsl: qbman: Use raw spinlock for cgr_lock
smp_call_function always runs its callback in hard IRQ context, even on PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock for cgr_lock to ensure we aren't waiting on a sleeping task. Although this bug has existed for a while, it was not apparent until commit |
||
Sean Anderson
|
584c2a9184 |
soc: fsl: qbman: Always disable interrupts when taking cgr_lock
smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.
Fixes:
|
||
Jakub Kicinski
|
67072c314f |
Merge branch 'tcp-rds-fix-use-after-free-around-kernel-tcp-reqsk'
Kuniyuki Iwashima says:
====================
tcp/rds: Fix use-after-free around kernel TCP reqsk.
syzkaller reported an warning of netns ref tracker for RDS TCP listener,
which commit
|
||
Kuniyuki Iwashima
|
2a750d6a5b |
rds: tcp: Fix use-after-free of net in reqsk_timer_handler().
syzkaller reported a warning of netns tracker [0] followed by KASAN splat [1] and another ref tracker warning [1]. syzkaller could not find a repro, but in the log, the only suspicious sequence was as follows: 18:26:22 executing program 1: r0 = socket$inet6_mptcp(0xa, 0x1, 0x106) ... connect$inet6(r0, &(0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async) The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT. So, the scenario would be: 1. unshare(CLONE_NEWNET) creates a per netns tcp listener in rds_tcp_listen_init(). 2. syz-executor connect()s to it and creates a reqsk. 3. syz-executor exit()s immediately. 4. netns is dismantled. [0] 5. reqsk timer is fired, and UAF happens while freeing reqsk. [1] 6. listener is freed after RCU grace period. [2] Basically, reqsk assumes that the listener guarantees netns safety until all reqsk timers are expired by holding the listener's refcount. However, this was not the case for kernel sockets. Commit |
||
Eric Dumazet
|
1c4e97dd2d |
tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge()
inet_twsk_purge() uses rcu to find TIME_WAIT and NEW_SYN_RECV
objects to purge.
These objects use SLAB_TYPESAFE_BY_RCU semantic and need special
care. We need to use refcount_inc_not_zero(&sk->sk_refcnt).
Reuse the existing correct logic I wrote for TIME_WAIT,
because both structures have common locations for
sk_state, sk_family, and netns pointer.
If after the refcount_inc_not_zero() the object fields longer match
the keys, use sock_gen_put(sk) to release the refcount.
Then we can call inet_twsk_deschedule_put() for TIME_WAIT,
inet_csk_reqsk_queue_drop_and_put() for NEW_SYN_RECV sockets,
with BH disabled.
Then we need to restart the loop because we had drop rcu_read_lock().
Fixes:
|
||
Linus Torvalds
|
9187210eee |
Networking changes for 6.9.
Core & protocols ---------------- - Large effort by Eric to lower rtnl_lock pressure and remove locks: - Make commonly used parts of rtnetlink (address, route dumps etc.) lockless, protected by RCU instead of rtnl_lock. - Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback. - Remove locks / serialization in the socket diag interface. - Remove 6 calls to synchronize_rcu() while holding rtnl_lock. - Remove the dev_base_lock, depend on RCU where necessary. - Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults. - Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible. - Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems. - Support TCP_NOTSENT_LOWAT in MPTCP. - Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec. - Support forwarding of ICMP Error messages in IPSec, per RFC 4301. - Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine. - Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks. - Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc. - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets. - Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths). - Speed up scanning for expired routes by keeping a dedicated list. - Speed up "generic" XDP by trying harder to avoid large allocations. - Support attaching arbitrary metadata to netconsole messages. Things we sprinkled into general kernel code -------------------------------------------- - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena). - Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass). Netfilter --------- - Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership. - Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures. BPF --- - Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. - Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs. - Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it. - Extend the BPF verifier to enable static subprog calls in spin lock critical sections. - Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type. - Add support for retrieval of cookies for perf/kprobe multi links. - Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls. - Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects. Wireless -------- - Add SPP (signaling and payload protected) AMSDU support. - Support wider bandwidth OFDMA, as required for EHT operation. Driver API ---------- - Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers. - Define an API for querying per netdev queue statistics from drivers. - IPSec: account in global stats for fully offloaded sessions. - Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code. - Enable Rx hashing (RSS) on GTP protocol fields. Misc ---- - Improvements and refactoring all over networking selftests. - Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies. - Address all missing MODULE_DESCRIPTION() warnings in networking. - Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type". Drivers ------- - Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues - Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support - Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch - PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva. - CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx - WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXv0mgACgkQMUZtbf5S IrtgMxAAuRd+WJW++SENr4KxIWhYO1q6Xcxnai43wrNkan9swD24icG8TYALt4f3 yoT6idQvWReAb5JNlh9rUQz8R7E0nJXlvEFn5MtJwcthx2C6wFo/XkJlddlRrT+j c2xGILwLjRhW65LaC0MZ2ECbEERkFz8xcGfK2SWzUgh6KYvPjcRfKFxugpM7xOQK P/Wnqhs4fVRS/Mj/bCcXcO+yhwC121Q3qVeQVjGS0AzEC65hAW87a/kc2BfgcegD EyI9R7mf6criQwX+0awubjfoIdr4oW/8oDVNvUDczkJkbaEVaLMQk9P5x/0XnnVS UHUchWXyI80Q8Rj12uN1/I0h3WtwNQnCRBuLSmtm6GLfCAwbLvp2nGWDnaXiqryW DVKUIHGvqPKjkOOMOVfSvfB3LvkS3xsFVVYiQBQCn0YSs/gtu4CoF2Nty9CiLPbK tTuxUnLdPDZDxU//l0VArZmP8p2JM7XQGJ+JH8GFH4SBTyBR23e0iyPSoyaxjnYn RReDnHMVsrS1i7GPhbqDJWn+uqMSs7N149i0XmmyeqwQHUVSJN3J2BApP2nCaDfy H2lTuYly5FfEezt61NvCE4qr/VsWeEjm1fYlFQ9dFn4pGn+HghyCpw+xD1ZN56DN lujemau5B3kk1UTtAT4ypPqvuqjkRFqpNV2LzsJSk/Js+hApw8Y= =oY52 -----END PGP SIGNATURE----- Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Large effort by Eric to lower rtnl_lock pressure and remove locks: - Make commonly used parts of rtnetlink (address, route dumps etc) lockless, protected by RCU instead of rtnl_lock. - Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback. - Remove locks / serialization in the socket diag interface. - Remove 6 calls to synchronize_rcu() while holding rtnl_lock. - Remove the dev_base_lock, depend on RCU where necessary. - Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults. - Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible. - Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems. - Support TCP_NOTSENT_LOWAT in MPTCP. - Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec. - Support forwarding of ICMP Error messages in IPSec, per RFC 4301. - Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine. - Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks. - Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc. - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets. - Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths). - Speed up scanning for expired routes by keeping a dedicated list. - Speed up "generic" XDP by trying harder to avoid large allocations. - Support attaching arbitrary metadata to netconsole messages. Things we sprinkled into general kernel code: - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena). - Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass). Netfilter: - Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership. - Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures. BPF: - Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. - Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs. - Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it. - Extend the BPF verifier to enable static subprog calls in spin lock critical sections. - Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type. - Add support for retrieval of cookies for perf/kprobe multi links. - Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls. - Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects. Wireless: - Add SPP (signaling and payload protected) AMSDU support. - Support wider bandwidth OFDMA, as required for EHT operation. Driver API: - Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers. - Define an API for querying per netdev queue statistics from drivers. - IPSec: account in global stats for fully offloaded sessions. - Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code. - Enable Rx hashing (RSS) on GTP protocol fields. Misc: - Improvements and refactoring all over networking selftests. - Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies. - Address all missing MODULE_DESCRIPTION() warnings in networking. - Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type". Drivers: - Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues - Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support - Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch - PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva. - CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx - WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro" * tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits) nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y nexthop: Fix out-of-bounds access during attribute validation nexthop: Only parse NHA_OP_FLAGS for dump messages that require it nexthop: Only parse NHA_OP_FLAGS for get messages that require it bpf: move sleepable flag from bpf_prog_aux to bpf_prog bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() selftests/bpf: Add kprobe multi triggering benchmarks ptp: Move from simple ida to xarray vxlan: Remove generic .ndo_get_stats64 vxlan: Do not alloc tstats manually devlink: Add comments to use netlink gen tool nfp: flower: handle acti_netdevs allocation failure net/packet: Add getsockopt support for PACKET_COPY_THRESH net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID selftests/bpf: Add bpf_arena_htab test. selftests/bpf: Add bpf_arena_list test. selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages bpf: Add helper macro bpf_addr_space_cast() libbpf: Recognize __arena global variables. bpftool: Recognize arena map type ... |
||
Linus Torvalds
|
1f44039766 |
A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation - Rework some of the other top-level pages for better readability and, with luck, fewer merge conflicts in the future. - Submit-checklist improvements, hopefully the first of many. - New Italian translations - A fair number of kernel-doc fixes and improvements. We have also dropped the recommendation to use an old version of Sphinx. - A new document from Thorsten on bisection ...and lots of fixes and updates. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmXvKVIACgkQF0NaE2wM flik1gf/ZFS1mHwDdmHA/vpx8UxdUlFEo0Pms8V24iPSW5aEIqkZ406c9DSyMTtp CXTzW+RSCfB1Q3ciYtakHBgv0RzZ5+RyaEZ1l7zVmMyw4nYvK6giYKmg8Y0EVPKI fAVuPWo5iE7io0sNVbKBKJJkj9Z8QEScM48hv/CV1FblMvHYn0lie6muJrF9G6Ez HND+hlYZtWkbRd5M86CDBiFeGMLVPx17T+psQyQIcbUYm9b+RUqZRHIVRLYbad7r 18r9+83DsOhXTVJCBBSfCSZwzF8yAm+eD1w47sxnSItF8OiIjqCzQgXs3BZe9TXH h2YyeWbMN3xByA4mEgpmOPP44RW7Pg== =SC60 -----END PGP SIGNATURE----- Merge tag 'docs-6.9' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A moderatly busy cycle for development this time around. - Some cleanup of the main index page for easier navigation - Rework some of the other top-level pages for better readability and, with luck, fewer merge conflicts in the future. - Submit-checklist improvements, hopefully the first of many. - New Italian translations - A fair number of kernel-doc fixes and improvements. We have also dropped the recommendation to use an old version of Sphinx. - A new document from Thorsten on bisection ... and lots of fixes and updates" * tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits) docs: verify/bisect: fixes, finetuning, and support for Arch docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst docs: submit-checklist: use subheadings docs: submit-checklist: structure by category docs: new text on bisecting which also covers bug validation docs: drop the version constraints for sphinx and dependencies docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4 docs: Restore "smart quotes" for quotes docs/zh_CN: accurate translation of "function" docs: Include simplified link titles in main index docs: Correct formatting of title in admin-guide/index.rst docs: kernel_feat.py: fix build error for missing files MAINTAINERS: Set the field name for subsystem profile section kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO Fixed case issue with 'fault-injection' in documentation kernel-doc: handle #if in enums as well Documentation: update mailing list addresses doc: kerneldoc.py: fix indentation scripts/kernel-doc: simplify signature printing ... |
||
Linus Torvalds
|
3749bda230 |
audit/stable-6.9 PR 20240312
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmXwtu0UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMYIQ//b1LFiCpsLGp7d53tOdpnUHr5uLkq fZPJZAt55t/tM8Bo32XPWCGmM9nSYhd+zCg+3eeXDZ9QP6P2MKJQv2O+Xw0B1VaA yQPqz0Km9Erh+S/aElJ94NVEkSZG4iKzTQ0ic3B8+NT/5RTPXNYL8+OjhMz4hjHC MFPVuPGccC3r0S+lom7DgFudyLpHfJ4cRjLfl7su48zeks82R1LussQvDYTQXPNj K1Z/zbvNTfWBi71ONbTylYa+wiEo9wCqTwuBMlevh5ZAElob2IkBEmaWZewUIzmz IF/qMDflSYRvDTzIr+EiI+fXy0fgdsGFhoL5J37/oet7JDfGyrN+gWkAmm6seai9 7CHa7oufBRnkTrxAuphQRKd5ZlBfBMQajcSgbOPIxFo8MJ9JYGK7Cp+Hk9ILGWOI MDH0hjC5oBS5f3sI9okpzEQNwrewSjRxDLdKovinju1jDQ3nVS9UVldu6sQzSKWn d9ifm8cizmH9zY0J5kan+j6n3xMbNxOKU1Q6UsXu820G5K4rxtVXOlG00CQ/anjd F9f9M698T/deuwc3OJSyXvAvvh18+RGMSI6CCYXfwvzUJh8meYZkZNmTqNAAFSNf GOiLKXlPH2A5MIhPrxwzRWUfpAdgguSCM8BdebzQ4KS/zVSOcaEdMtuit0l5iP1D g/kO1e83H37DIpw= =ya1r -----END PGP SIGNATURE----- Merge tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Two small audit patches: - Use the KMEM_CACHE() macro instead of kmem_cache_create() The guidance appears to be to use the KMEM_CACHE() macro when possible and there is no reason why we can't use the macro, so let's use it. - Remove an unnecessary assignment in audit_dupe_lsm_field() A return value variable was assigned a value in its declaration, but the declaration value is overwritten before the return value variable is ever referenced; drop the assignment at declaration time" * tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: use KMEM_CACHE() instead of kmem_cache_create() audit: remove unnecessary assignment in audit_dupe_lsm_field() |