- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmOfrj8THG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgIWtD/9mGF/ze2k+qFTo+30fb7bO8WJIDgsR
dIASnZjXV7q/45elvymhUdkQv4R7xL3pzC40P1+ZKtWzGTNe+zWUQLoALNwRK85j
8CsxZbqefGNKE5Z6ZHo9s37wsu3+jJu9yEQpGFo1LINyzeclCn5St5oqfRam+Hd/
cPF+VfvREwZ0+YOKGBhJ2EgC+Gc9xsFY7DLQsoYlu71iZZr6Z6rgZW/EY5h3RMGS
YKBoVwDsWaU0FpFWrr/rYTI6DqSr3AHr1+ftDg7ncCZMD6vQva6aMCCt94aLB1aE
vC+DNdhZlA558bXGa5yA7Wr//7aUBUIwyC60DogOeZ6vw3kD9tdEd1fbH5hmqNKY
K5bfqm28XU2959CTE8RDgsYYZvwDcfrjBIML14WZGdCQOTcGKpgOGp22o6yNb1Pq
JKpHHnVpvu2PZ/p2XdKSm9+etr2yI6lXZAEVTS7ehdtMukButjSHEVbSCEZ8tlWz
KokQt2J23BMHuSrXK6+67wWQBtdsLEk+LBOQmweiwarMocqvL/Zjz/5J7DR2DtH8
wlY3wOtB1+E5j7xZ+RgK3c3jNg5dH39ZwvFsSATWTI3P+iq6OK/bbk4q4LmZt2l9
ZIfH/CXPf9BvGCHzHa3AAd3UBbJLFwj17btMEv1wFVPS0T4LPUzkgTNTNUYeP6zL
h1e5QfgUxvKPuQ==
=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
filtering on x86_64.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY56YjgAKCRDdBJ7gKXxA
jni0AQCXYCZE1pOVXnB+IA1G1xkM0f1xDS/D63uJVl7Lyurv5QEAvJWX25DsTbLR
c0bq3y2PPpHzrcDyPhciVlY/iplHQQM=
=tfs8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull fault-injection updates from Andrew Morton:
"Some fault-injection improvements from Wei Yongjun which enable
stacktrace filtering on x86_64"
* tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fault-injection: make stacktrace filter works as expected
fault-injection: make some stack filter attrs more readable
fault-injection: skip stacktrace filtering by default
fault-injection: allow stacktrace filter for x86-64
- Two minor feature patches which were awkwardly dependent on mm-nonmm.
I need to set up a new branch to handle such things.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY56V1wAKCRDdBJ7gKXxA
juVQAP9pr5XBx880RJEil6skMCxYJmae8LvYShhvxJi9keot7QEA3wZRlGcllw/3
fiHcsaBlXqtXBWUbtnMezcdP6gb3TQo=
=8T1p
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
- A few late-breaking minor fixups
- Two minor feature patches which were awkwardly dependent on mm-nonmm.
I need to set up a new branch to handle such things.
* tag 'mm-stable-2022-12-17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: zram: zsmalloc: Add an additional co-maintainer
mm/kmemleak: use %pK to display kernel pointers in backtrace
mm: use stack_depot for recording kmemleak's backtrace
maple_tree: update copyright dates for test code
maple_tree: fix mas_find_rev() comment
mm/gup_test: free memory allocated via kvcalloc() using kvfree()
* Randomize the per-cpu entry areas
Cleanups:
* Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open
coding it
* Move to "native" set_memory_rox() helper
* Clean up pmd_get_atomic() and i386-PAE
* Remove some unused page table size macros
-----BEGIN PGP SIGNATURE-----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=wwVF
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the architecture
does not make use of irq domains instead of returning 0, which is pretty
limiting.
- Check for the presence of an irq domain when validating the MSI iterator,
as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ field
on teardown, leading to a splat and leaked descriptors.
-----BEGIN PGP SIGNATURE-----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=yuHx
-----END PGP SIGNATURE-----
Merge tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms
Pull MSI fixes from Marc Zyngier:
"Thomas tasked me with sending out a few urgent fixes after the giant
MSI rework that landed in 6.2, as both s390 and powerpc ended-up
suffering from it (they do not use the full core code infrastructure,
leading to these previously undetected issues):
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the
architecture does not make use of irq domains instead of returning
0, which is pretty limiting.
- Check for the presence of an irq domain when validating the MSI
iterator, as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ
field on teardown, leading to a splat and leaked descriptors"
* tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms:
powerpc/msi: Fix deassociation of MSI descriptors
genirq/msi: Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when no domain is present
genirq/msi: Check for the presence of an irq domain when validating msi_ctrl
* misc. small fixes
-----BEGIN PGP SIGNATURE-----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=H70N
-----END PGP SIGNATURE-----
Merge tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- misc small fixes
* tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_core: Fix error handling in ssi_init()
headers: Remove some left-over license text in include/uapi/linux/hsi/
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: ssi_protocol: Fix return type of ssip_pn_xmit()
- bq25890: add charge voltage/current support
- bd99954: convert to linear range
- convert all i2c drivers to use probe_new
- misc. fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=xxhs
-----END PGP SIGNATURE-----
Merge tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- bq25890: add charge voltage/current support
- bd99954: convert to linear range
- convert all i2c drivers to use probe_new
- misc fixes and cleanups
* tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits)
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
power: supply: bq25890: Fix usb-notifier probe and remove races
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
power: supply: Fix refcount leak in rk817_charger_probe
power: supply: bq25890: Only use pdata->regulator_init_data for vbus
power: supply: ab8500: Fix error handling in ab8500_charger_init()
power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe()
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
power: supply: z2_battery: Convert to i2c's .probe_new()
power: supply: ucs1002: Convert to i2c's .probe_new()
power: supply: smb347: Convert to i2c's .probe_new()
power: supply: sbs-manager: Convert to i2c's .probe_new()
power: supply: sbs: Convert to i2c's .probe_new()
power: supply: rt9455: Convert to i2c's .probe_new()
power: supply: rt5033_battery: Convert to i2c's .probe_new()
power: supply: max17042_battery: Convert to i2c's .probe_new()
power: supply: max17040: Convert to i2c's .probe_new()
power: supply: max14656: Convert to i2c's .probe_new()
power: supply: ltc4162-l: Convert to i2c's .probe_new()
power: supply: ltc2941: Convert to i2c's .probe_new()
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmOcmvEACgkQ+iyteGJfRso1OwCfWAZIdbdWdeEVq33zAT4/TZKE
foYAn0ebKrOX26HEAmGgZy4Ze2pdFxVo
=toMy
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
lot. Plus, there are some bugfixes as a bonus.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCY5xICAAKCRAw5/Bqldv6
8nkhAJ9lqVnS7+m2eq5w1gQlgd2ToktRaQCfcj7WPznJCe3dPVpwSsWxa//B1Rw=
=B8QS
-----END PGP SIGNATURE-----
Merge tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Lee Jones offered his help with maintaining LEDs, thanks a lot.
Plus, there are some bugfixes as a bonus"
* tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: MAINTAINERS: include dt-bindings headers
leds: qcom,pm8058-led: Convert to DT schema
leds: use sysfs_emit() to instead of scnprintf()
leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}
MAINTAINERS: Add additional co-maintainer to LEDs
leds: lp5523: fix out-of-bounds bug in lp5523_selftest()
dt-bindings: leds: Add 'cpuX' to 'linux,default-trigger'
led: qcom-lpg: Fix sleeping in atomic
leds: max8997: Don't error if there is no pdata
leds: lp55xx: remove variable j
leds-pca955x: Remove the unused function pca95xx_num_led_regs()
Fix two build warnings on 32 bit platforms
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY50UewAKCRCFwuHvBreF
YazuAQCHY/yOiziPBqNvI9jSb/MVGh1oaZQZRTkt5fOvLSGt8gD/Rv30/h6EcKfG
S5A6eQ3qrVzEhp7P8mST2Q/MkGmQ+AQ=
=Qw7m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Fix two build warnings on 32 bit platforms
It seems the linux-next CI and 0-day bot are not testing enough 32 bit
configurations, as soon as you merged the rdma pull request there were
two instant reports of warnings on these sytems that I would have
thought should have been covered by time in linux-next
Anyhow, here are the fixes so people don't hit problems with -Werror"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix pointer cast warning
RDMA/rxe: Fix compile warnings on 32-bit
- Revert a change to delete_work_func() that has gone wrong in commit
c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
inodes").
- Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
holder is still queued.
- gfs2: Always check the inode size of inline inodes when reading in
inodes to prevent corrupt filesystem images from causing weid errors.
- Properly handle a race between gfs2_create_inode() and
gfs2_inode_lookup() that causes insert_inode_locked4() to return
-EBUSY.
- Fix and clean up the interaction between gfs2_create_inode() and
gfs2_evict_inode() by completely handling the inode deallocation and
destruction in gfs2_evict_inode().
- Remove support for glock holder auto-demotion as we have no current
plans of using this feature again.
- And a few more minor cleanups and clarifications.
-----BEGIN PGP SIGNATURE-----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=mwok
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updtaes from Andreas Gruenbacher:
- Revert a change to delete_work_func() that has gone wrong in commit
c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
inodes").
- Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
holder is still queued.
- gfs2: Always check the inode size of inline inodes when reading in
inodes to prevent corrupt filesystem images from causing weid errors.
- Properly handle a race between gfs2_create_inode() and
gfs2_inode_lookup() that causes insert_inode_locked4() to return
-EBUSY.
- Fix and clean up the interaction between gfs2_create_inode() and
gfs2_evict_inode() by completely handling the inode deallocation and
destruction in gfs2_evict_inode().
- Remove support for glock holder auto-demotion as we have no current
plans of using this feature again.
- And a few more minor cleanups and clarifications.
* tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove support for glock holder auto-demotion (2)
gfs2: Remove support for glock holder auto-demotion
gfs2: Minor gfs2_try_evict cleanup
gfs2: Partially revert gfs2_inode_lookup change
gfs2: Add gfs2_inode_lookup comment
gfs2: Uninline and improve glock_{set,clear}_object
gfs2: Simply dequeue iopen glock in gfs2_evict_inode
gfs2: Clean up after gfs2_create_inode rework
gfs2: Avoid dequeuing GL_ASYNC glock holders twice
gfs2: Make gfs2_glock_hold return its glock argument
gfs2: Always check inode size of inline inodes
gfs2: Cosmetic gfs2_dinode_{in,out} cleanup
gfs2: Handle -EBUSY result of insert_inode_locked4
gfs2: Fix and clean up create / evict interaction
gfs2: Clean up initialization of "ip" in gfs2_create_inode
gfs2: Get rid of ghs[] in gfs2_create_inode
gfs2: Add extra error check in alloc_dinode
Since 2f2940d168 ("genirq/msi: Remove filter from
msi_free_descs_free_range()"), the core MSI code relies on the
msi_desc->irq field to have been cleared before the descriptor
can be freed, as it indicates that there is no association with
a device anymore.
The irq domain code provides this guarantee, and so does s390,
which is one of the two architectures not using irq domains for
MSIs.
Powerpc, however, is missing this particular requirements,
leading in a splat and leaked MSI descriptors.
Adding the now required irq reset to the handful of powerpc backends
that implement MSIs fixes that particular problem.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/70dab88e-6119-0c12-7c6a-61bcbe239f66@roeck-us.net
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix Kconfig dependencies to re-allow the enabling of function graph
tracer and shadow call stacks at the same time.
- Revert the workaround for CPU erratum #2645198 since the CONFIG_
guards were incorrect and the code has therefore not seen any real
exposure in -next.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOcVWkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNF/7B/wIGicobLxXMMkuao+ipm5V/eLnVRuVt6WD
T//5ZG+3Td3xON+mdt/byIm/Npl1I2l+NDjK9jIFcS5A/Q7DmwbcxJV+6BhRdb7o
XQxkHsKR2DTbmbeqd0+AkZGJc4jk5D+vuyLeo8jcc6bSpQhepCOV5R5JVOadg9mg
WxuITwsodI9GfQGmupggF6C31yMCYibmlD9WWNW8tNx8TBojU97pJbQaf1h3bC9i
JE9CxBVYmt3Qg5BAB46EdH60lxELyHpEjJNvgvZZpFz4a/bBB47mG7Cy+ECldc5p
LukJnAImydedwgQqgBD0e0HyXoIQ8r8NZ+yNgig2asQxA5DYsI1L
=IZRW
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix Kconfig dependencies to re-allow the enabling of function graph
tracer and shadow call stacks at the same time.
- Revert the workaround for CPU erratum #2645198 since the CONFIG_
guards were incorrect and the code has therefore not seen any real
exposure in -next.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption"
ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
Libraries:
- Drop the old copy of libtraceevent in tools/lib/traceevent/ now that all major distros
ship it from its external repository.
This is now just another feature detection, emitting a warning when the
libtraceevent-dev[el] package isn't installed, disabling the build of perf features
and tools that strictly require parsing things from tracefs while keeping
the core functionality present and working with a subset of the events, the
most used ones like CPU cycles, hardware cache and also vendor events, etc.
This was tested with lots of containers for Fedora, Debian, OpenSUSE, Alpine Linux,
Ubuntu, with cross builds, etc.
Build:
- Update to C standard to gnu11, like was done for the kernel.
- Install the tools/lib/ libraries locally instead of having headers searched
directly from the source code directories, to help the cases where we can
build either from in-kernel source libraries or from the same library shipped
as a distro package, as is the case with libbpf and was the case with
libtraceevent.
perf stat:
- Do not delay the workload with --delay, the delay is just for starting to count
the events, to skip noise at workload startup.
- When we have events for each cgroup, the metric should be printed for each
cgroup separately.
$ perf stat -a --for-each-cgroup system.slice,user.slice --metric-only sleep 1
Performance counter stats for 'system wide':
GHz insn per cycle branch-misses of all branches
system.slice 3.792 0.61 3.24%
user.slice 3.661 2.32 0.37%
- Fix printing field separator in CSV metrics output.
- Fix --metric-only --json output.
- Fix summary output in CSV with --metric-only.
- Update event group check for support of uncore event.
perf test:
- Stop requiring a C toolchain in shell tests, instead add a workload option that has
all the previously C snippets built as part of 'perf test -w' that then get used in
the 'perf test' shell scripts.
- Add event group test for events in multiple PMUs
- The "kernel lock contention analysis" test should not print warnings in quiet mode.
- Add attr tests for ARM64's new VG register.
- Fix record test on KVM guests, as using precise flag with the
br_inst_retired.near_call event causes the test fail on KVM guests, even when
the guests have PMU forwarding enabled and the event itself is supported, so just
remove the precise flag from the event.
- Add mechanism for skipping attr tests on specific kernel versions where it is known that
these checks will fail.
- Skip watchpoint tests if no watchpoints available.
- Add more Intel PT 'perf test' entries: hybrid CPUs, split the packet decoder
into a suite of subtests.
perf script:
- Introduce task analyzer python script, where one first records some events:
Recording can be done in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse any perf.data files, as long as it has sched:sched_switch events,
other events will be ignored.
The most simple report use case is to just call the script without arguments.
Runtime is the time the task was running on the CPU, Time Out-In is the time
between the process being scheduled *out* and scheduled back *in*. So the last
time span between two executions:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
perf lock:
- Allow concurrent record and report to support live monitoring of kernel lock
contention without BPF:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
- Implement -t/--threads option when using BPF:
$ sudo ./perf lock contention -abt -E 5 sleep 1
contended total wait max wait avg wait pid comm
1 740.66 ms 740.66 ms 740.66 ms 1950 nv_queue
3 305.50 ms 298.19 ms 101.83 ms 1884 nvidia-modeset/
1 25.14 us 25.14 us 25.14 us 2725038 EventManager_De
12 23.09 us 9.30 us 1.92 us 0 swapper
1 20.18 us 20.18 us 20.18 us 2725033 EventManager_De
- Add -l/--lock-addr to aggregate per-lock-instance contention:
$ sudo ./perf lock contention -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
perf record:
- Add remaining branch filters: "no_cycles", "no_flags" & "hw_index", to be
used with hardware such as Intel's LBR that allows things like stitching
stacks of two samples to overcome the limits of the number of LBR registers.
Symbol resolution:
- Handle .debug files created with 'objcopy --only-keep-debug', where program
headers are zeroed and thus can't be used for adjustments, use the info in
the runtime_ss (runtime ELF) instead.
perf trace:
- Add BPF based augmenter for the 'perf_event_open's 'struct perf_event_attr' argument.
- Add BPF based augmenter for the 'clock_gettime's 'struct timespec' argument.
- In both cases the syscall tracepoint has just the pointer value, we
need to hook a BPF program to collect the pointer contents, and then,
in userspace, pretty print it in 'perf trace'.
perf list:
- Introduce JSON output of events.
- Streamline how the expression specifying what events should be shown is handled,
fixing several corner cases, such as the metric filter that is specified as a glob
but was using strstr().
perf probe:
- Fix to avoid crashing if DW_AT_decl_file is NULL, coping with clang generating
DWARF5 like that.
- Use dwarf_attr_integrate() as generic DWARF attr accessor as it supersedes dwarf_attr(),
supporting abstact origin DIEs.
perf inject:
- Set PERF_RECORD_MISC_BUILD_ID_SIZE in the PERF_RECORD_HEADER_BUILD_ID so that
perf.data readers can get the real build-id size and avoid trailing zeros.
perf data:
- Add tracepoint fields when converting a perf.data file to JSON.
arm64:
- Fix mksyscalltbl, don't lose syscalls due to sort -nu.
- Add Arm Neoverse V2 PMU events.
riscv:
- Add riscv sbi firmware std event files.
- Add Sifive U74 vendor events (JSON) file.
- Add some more events and metrics for Alderlake/Alderlake-N.
Documentation:
- Add data documentation for the PMU structs in the C source code.
Miscellaneous:
- Periodic sanitization of headers, adding missing includes, removing needless ones,
creating new ones, etc.
- Use sig_atomic_t for signal handlers to avoid undefined behaviour in all perf
tools.
- Fixes for libbpf 1.0+ compatibility (maps, etc) on 'perf trace' BPF examples.
- Remove some old perf bpf examples, leave the best ones that demonstrate how
to associate BPF functions to points in the kernel.
- Make quiet mode consistent between tools.
- Use dedicated non-atomic clear/set bit helpers.
- Use "grep -E" instead of "egrep" as recommended by warning emitted by GNU
grep since at least version 3.8.
- Complete list of supported subcommands in the 'perf daemon' help message.
- Update John Garry's email address for arm64 perf tooling on the MAINTAINERS file,
he moved from Huawei to Oracle.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY5yARAAKCRCyPKLppCJ+
J7bdAQCO4Y4gXKWv+AQc77aptQaCRmWy6T9ynsdv5gOV43NpCwD/TWZz8zcBqLSS
fxYSgf2kOQ3Z9soE4/udsL5sDhFbsgA=
=hLlg
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.2-1-2022-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Libraries:
- Drop the old copy of libtraceevent in tools/lib/traceevent/ now
that all major distros ship it from its external repository.
This is now just another feature detection, emitting a warning when
the libtraceevent-dev[el] package isn't installed, disabling the
build of perf features and tools that strictly require parsing
things from tracefs while keeping the core functionality present
and working with a subset of the events, the most used ones like
CPU cycles, hardware cache and also vendor events, etc.
This was tested with lots of containers for Fedora, Debian,
OpenSUSE, Alpine Linux, Ubuntu, with cross builds, etc.
Build:
- Update to C standard to gnu11, like was done for the kernel.
- Install the tools/lib/ libraries locally instead of having headers
searched directly from the source code directories, to help the
cases where we can build either from in-kernel source libraries or
from the same library shipped as a distro package, as is the case
with libbpf and was the case with libtraceevent.
perf stat:
- Do not delay the workload with --delay, the delay is just for
starting to count the events, to skip noise at workload startup.
- When we have events for each cgroup, the metric should be printed
for each cgroup separately.
$ perf stat -a --for-each-cgroup system.slice,user.slice --metric-only sleep 1
Performance counter stats for 'system wide':
GHz insn per cycle branch-misses of all branches
system.slice 3.792 0.61 3.24%
user.slice 3.661 2.32 0.37%
- Fix printing field separator in CSV metrics output.
- Fix --metric-only --json output.
- Fix summary output in CSV with --metric-only.
- Update event group check for support of uncore event.
perf test:
- Stop requiring a C toolchain in shell tests, instead add a workload
option that has all the previously C snippets built as part of
'perf test -w' that then get used in the 'perf test' shell scripts.
- Add event group test for events in multiple PMUs
- The "kernel lock contention analysis" test should not print
warnings in quiet mode.
- Add attr tests for ARM64's new VG register.
- Fix record test on KVM guests, as using precise flag with the
br_inst_retired.near_call event causes the test fail on KVM guests,
even when the guests have PMU forwarding enabled and the event
itself is supported, so just remove the precise flag from the
event.
- Add mechanism for skipping attr tests on specific kernel versions
where it is known that these checks will fail.
- Skip watchpoint tests if no watchpoints available.
- Add more Intel PT 'perf test' entries: hybrid CPUs, split the
packet decoder into a suite of subtests.
perf script:
- Introduce task analyzer python script, where one first records some events:
Recording can be done in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse any perf.data files, as long as it has
sched:sched_switch events, other events will be ignored.
The most simple report use case is to just call the script without
arguments.
Runtime is the time the task was running on the CPU, Time Out-In is
the time between the process being scheduled *out* and scheduled
back *in*. So the last time span between two executions:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
perf lock:
- Allow concurrent record and report to support live monitoring of
kernel lock contention without BPF:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
- Implement -t/--threads option when using BPF:
$ sudo ./perf lock contention -abt -E 5 sleep 1
contended total wait max wait avg wait pid comm
1 740.66 ms 740.66 ms 740.66 ms 1950 nv_queue
3 305.50 ms 298.19 ms 101.83 ms 1884 nvidia-modeset/
1 25.14 us 25.14 us 25.14 us 2725038 EventManager_De
12 23.09 us 9.30 us 1.92 us 0 swapper
1 20.18 us 20.18 us 20.18 us 2725033 EventManager_De
- Add -l/--lock-addr to aggregate per-lock-instance contention:
$ sudo ./perf lock contention -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
perf record:
- Add remaining branch filters: "no_cycles", "no_flags" & "hw_index",
to be used with hardware such as Intel's LBR that allows things
like stitching stacks of two samples to overcome the limits of the
number of LBR registers.
Symbol resolution:
- Handle .debug files created with 'objcopy --only-keep-debug', where
program headers are zeroed and thus can't be used for adjustments,
use the info in the runtime_ss (runtime ELF) instead.
perf trace:
- Add BPF based augmenter for the 'perf_event_open's 'struct
perf_event_attr' argument.
- Add BPF based augmenter for the 'clock_gettime's 'struct timespec'
argument.
- In both cases the syscall tracepoint has just the pointer value, we
need to hook a BPF program to collect the pointer contents, and
then, in userspace, pretty print it in 'perf trace'.
perf list:
- Introduce JSON output of events.
- Streamline how the expression specifying what events should be
shown is handled, fixing several corner cases, such as the metric
filter that is specified as a glob but was using strstr().
perf probe:
- Fix to avoid crashing if DW_AT_decl_file is NULL, coping with clang
generating DWARF5 like that.
- Use dwarf_attr_integrate() as generic DWARF attr accessor as it
supersedes dwarf_attr(), supporting abstact origin DIEs.
perf inject:
- Set PERF_RECORD_MISC_BUILD_ID_SIZE in the PERF_RECORD_HEADER_BUILD_ID
so that perf.data readers can get the real build-id size and avoid
trailing zeroes.
perf data:
- Add tracepoint fields when converting a perf.data file to JSON.
arm64:
- Fix mksyscalltbl, don't lose syscalls due to sort -nu.
- Add Arm Neoverse V2 PMU events.
riscv:
- Add riscv sbi firmware std event files.
- Add Sifive U74 vendor events (JSON) file.
- Add some more events and metrics for Alderlake/Alderlake-N.
Documentation:
- Add data documentation for the PMU structs in the C source code.
Miscellaneous:
- Periodic sanitization of headers, adding missing includes, removing
needless ones, creating new ones, etc.
- Use sig_atomic_t for signal handlers to avoid undefined behaviour
in all perf tools.
- Fixes for libbpf 1.0+ compatibility (maps, etc) on 'perf trace' BPF
examples.
- Remove some old perf bpf examples, leave the best ones that
demonstrate how to associate BPF functions to points in the kernel.
- Make quiet mode consistent between tools.
- Use dedicated non-atomic clear/set bit helpers.
- Use "grep -E" instead of "egrep" as recommended by warning emitted
by GNU grep since at least version 3.8.
- Complete list of supported subcommands in the 'perf daemon' help
message.
- Update John Garry's email address for arm64 perf tooling on the
MAINTAINERS file, he moved from Huawei to Oracle"
* tag 'perf-tools-for-v6.2-1-2022-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (239 commits)
libperf: Fix install_pkgconfig target
perf tools: Use "grep -E" instead of "egrep"
perf stat: Do not delay the workload with --delay
perf evlist: Remove group option.
perf build: Fix python/perf.so library's name
perf test arm64: Add attr tests for new VG register
perf test: Add mechanism for skipping attr tests on kernel versions
perf test: Add mechanism for skipping attr tests on auxiliary vector values
perf test: Add ability to test exit code for attr tests
perf test: add new task-analyzer tests
perf script: task-analyzer add csv support
perf script: Introduce task analyzer python script
perf cs-etm: Print auxtrace info even if OpenCSD isn't linked
perf cs-etm: Cleanup cs_etm__process_auxtrace_info()
perf cs-etm: Tidy up auxtrace info header printing
perf cs-etm: Remove unused stub methods
perf cs-etm: Print unknown header version as an error
perf test: Update perf lock contention test
perf lock contention: Add -l/--lock-addr option
perf lock contention: Implement -t/--threads option for BPF
...
This was a mismerge of a semantic conflict in my merge of the driver
core updates, where commit ff62b8e658 ("driver core: make struct
class.devnode() take a const *") changed the devnode function pointer
type. In the meantime, the drm tree I merged earlier had introduced a
new use of that in commit 8bf4889762 ("drivers/accel: define kconfig
and register a new major").
And of course this happens when I'm traveling with my laptop, and thus
didn't do a full allmodconfig build between every pull and before
pushing my work out.
So I only noticed later as I was doing my full build.
Brown-paper-bag-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 71a7507afb Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On architectures such as s390 that do not use irq domains for MSI,
returning 0 as the maximum MSI index is a bit counter-productive,
as it indicates that no MSI can be allocated. Bad idea.
Instead, return the maximum we're willing to support in the MSI
backing store (MSI_XA_DOMAIN_SIZE), and let the arch code do its
usual thing.
Thanks to Matthew Rosato for fixing the fix.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87fsdgzpqs.ffs@tglx
For architectures such as s390 and powerpc that do not use
irq domains for MSIs, dev->msi.domain is always NULL, so
the per-device, per-bus MSI domain is also guaranteed to
be NULL.
So checking one without checking the other is bound to result
in a splat, followed by a memory leak as we don't free the MSI
descriptors.
Add the missing check.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/e570e70d-19bc-101b-0481-ff9a3cab3504@linux.ibm.com
Nathan reported that the new per-cpu mm patching oopses if DEBUG_VM is
enabled:
------------[ cut here ]------------
kernel BUG at arch/powerpc/mm/pgtable.c:333!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc2+ #1
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
...
NIP assert_pte_locked+0x180/0x1a0
LR assert_pte_locked+0x170/0x1a0
Call Trace:
0x60000000 (unreliable)
patch_instruction+0x618/0x6d0
arch_prepare_kprobe+0xfc/0x2d0
register_kprobe+0x520/0x7c0
arch_init_kprobes+0x28/0x3c
init_kprobes+0x108/0x184
do_one_initcall+0x60/0x2e0
kernel_init_freeable+0x1f0/0x3e0
kernel_init+0x34/0x1d0
ret_from_kernel_thread+0x5c/0x64
It's caused by the assert_spin_locked() failing in assert_pte_locked().
The assert fails because the PTE was unlocked in text_area_cpu_up_mm(),
and never relocked.
The PTE page shouldn't be freed, the patching_mm is only used for
patching on this CPU, only that single PTE is ever mapped, and it's only
unmapped at CPU offline.
In fact assert_pte_locked() has a special case to ignore init_mm
entirely, and the patching_mm is more-or-less like init_mm, so possibly
the check could be skipped for patching_mm too.
But for now be conservative, and use the proper PTE accessors at
patching time, so that the PTE lock is held while the PTE is used. That
also avoids the warning in assert_pte_locked().
With that it's no longer necessary to save the PTE in
cpu_patching_context for the mm_patch_enabled() case.
Fixes: c28c15b6d2 ("powerpc/code-patching: Use temporary mm for Radix MMU")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216125913.990972-1-mpe@ellerman.id.au
To resolve a trivial merge conflict with c302378bc1 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),
where a function present upstream was removed in the perf tools
development tree.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new
driver development and minor fixes. Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu systems.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wrdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykSDgCdHjUHS62/UnKdB9rLtyAOFxS/6DgAn2X4Unf8
RN8Mn2mUIiBzyu5p+Zc7
=tK3S
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
Here is the "big" set of tty/serial driver changes for 6.2-rc1.
As in previous kernel releases, nothing big here at all, just some small
incremental serial/tty layer cleanups and some individual driver
additions and fixes. Highlights are:
- serial helper macros from Jiri Slaby to reduce the amount of
duplicated code in serial drivers
- api cleanups and consolidations from Ilpo Järvinen in lots of serial
drivers
- the usual set of n_gsm fixes from Daniel Starke as that code gets
exercised more
- TIOCSTI is finally able to be disabled if requested (security
hardening feature from Kees Cook)
- fsl_lpuart driver fixes and features added
- other small serial driver additions and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wt5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSiACffLCC9SFnP1ClJJh73OpCN11alDAAoIfMct2A
/zrJ4on7o0YQU1Ilg2+k
=eD/I
-----END PGP SIGNATURE-----
Merge tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver changes for 6.2-rc1.
As in previous kernel releases, nothing big here at all, just some
small incremental serial/tty layer cleanups and some individual driver
additions and fixes. Highlights are:
- serial helper macros from Jiri Slaby to reduce the amount of
duplicated code in serial drivers
- api cleanups and consolidations from Ilpo Järvinen in lots of
serial drivers
- the usual set of n_gsm fixes from Daniel Starke as that code gets
exercised more
- TIOCSTI is finally able to be disabled if requested (security
hardening feature from Kees Cook)
- fsl_lpuart driver fixes and features added
- other small serial driver additions and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
serial: atmel: don't stop the transmitter when doing PIO
serial: atmel: cleanup atmel_start+stop_tx()
tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
serial: sunsab: Fix error handling in sunsab_init()
serial: altera_uart: fix locking in polling mode
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
tty: serial: fsl_lpuart: Add runtime pm support
tty: serial: fsl_lpuart: enable wakeup source for lpuart
serdev: Replace poll loop by readx_poll_timeout() macro
tty: synclink_gt: unwind actions in error path of net device open
serial: stm32: move dma_request_chan() before clk_prepare_enable()
dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: amba-pl011: avoid SBSA UART accessing DMACR register
tty: serial: altera_jtaguart: remove struct altera_jtaguart
tty: serial: altera_jtaguart: use uart_port::read_status_mask
tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
n_tty: Rename tail to old_tail in n_tty_read()
...
Here is the large set of staging driver changes for 6.2-rc1.
Another round of cleanups for staging drivers with no big additions.
Overall more lines were removed than added, always a nice sign, with
nothing happening in here other than general coding style cleanups and
minor fixes in the drivers. Full, boring, details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wsiw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRnQCgxZRxhdCGZU9KxNP02YHAX7yRv7QAoM+KJXv/
gZGyxkoCu0BHSiAhg1gf
=NfGd
-----END PGP SIGNATURE-----
Merge tag 'staging-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the large set of staging driver changes for 6.2-rc1.
Another round of cleanups for staging drivers with no big additions.
Overall more lines were removed than added, always a nice sign, with
nothing happening in here other than general coding style cleanups and
minor fixes in the drivers. Full, boring, details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (253 commits)
vme: Use root_device_register() not underlined version
staging: rtl8192e: Fix spelling mistake "ContryIE" -> "CountryIE"
vme: Fix error not catched in fake_init()
staging: vme_user: remove multiple blank lines
staging: r8188eu: use subtype helper in rtw_check_bcn_info
staging: r8188eu: use subtype helpers in collect_bss_info
staging: r8188eu: remove unused da parameter
staging: r8188eu: merge two probereq_p2p functions
staging: r8188eu: simplify err handling for unknown station
staging: r8188eu: handle the non-ap case first
staging: r8188eu: move bBusyTraffic update
staging: r8188eu: read reason code from ieee80211_mgmt
staging: r8188eu: use ieee80211_mgmt to parse addresses
staging: r8188eu: remove a variable
staging: r8188eu: simplify error handling for missing station
staging: r8188eu: stop beacon processing if kmalloc fails
staging: r8188eu: exit if beacon is not from our bss
staging: r8188eu: simplify update_sta_support_rate params
staging: r8188eu: use ie buffer in update_beacon_info
staging: r8188eu: pass only ies to process_p2p_ps_ie
...
Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1.
Overall, thanks to the removal of a driver, more lines were removed than
added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many USB
and other subsystem drivers, that ended up breaking the build. That
will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wvYg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl5DACgssl/ag4zDePHpfoiG5zEGEzH8XsAoMFrzvzu
d43hsH3qsfDGSZRkJJMu
=ORDd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the large set of USB and Thunderbolt driver changes for
6.2-rc1. Overall, thanks to the removal of a driver, more lines were
removed than added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many
USB and other subsystem drivers, that ended up breaking the build.
That will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
usb: dwc2: power on/off phy for peripheral mode in dual-role mode
usb: dwc2: disable lpm feature on Rockchip SoCs
dt-bindings: usb: mtk-xhci: add support for mt7986
usb: dwc3: core: defer probe on ulpi_read_id timeout
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
dt-bindings: vendor-prefixes: add Genesys Logic
usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
usb: typec: tipd: Set mode of operation for USB Type-C connector
usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
usb: musb: remove extra check in musb_gadget_vbus_draw
usb: gadget: uvc: Prevent buffer overflow in setup handler
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
usb: storage: Add check for kcalloc
USB: sisusbvga: use module_usb_driver()
USB: sisusbvga: rename sisusb.c to sisusbvga.c
USB: sisusbvga: remove console support
...
- simplify and remove some redundant codes handing directory entries
- optimize the size of exfat_entry_set_cache and its allocation policy
- improve the performance for creating files and directories
-----BEGIN PGP SIGNATURE-----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=sCw6
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat update from Namjae Jeon:
- simplify and remove some redundant directory entry code
- optimize the size of exfat_entry_set_cache and its allocation policy
- improve the performance for creating files and directories
* tag 'exfat-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reuse exfat_find_location() to simplify exfat_get_dentry_set()
exfat: fix overflow in sector and cluster conversion
exfat: remove i_size_write() from __exfat_truncate()
exfat: remove argument 'size' from exfat_truncate()
exfat: remove unnecessary arguments from exfat_find_dir_entry()
exfat: remove unneeded codes from __exfat_rename()
exfat: remove call ilog2() from exfat_readdir()
exfat: replace magic numbers with Macros
exfat: rename exfat_free_dentry_set() to exfat_put_dentry_set()
exfat: move exfat_entry_set_cache from heap to stack
exfat: support dynamic allocate bh for exfat_entry_set_cache
exfat: reduce the size of exfat_entry_set_cache
exfat: hint the empty entry which at the end of cluster chain
exfat: simplify empty entry hint
- Add options to the osnoise tracer
o panic_on_stop option that panics the kernel if osnoise is greater than some
user defined threshold.
o preempt option, to test noise while preemption is disabled
o irq option, to test noise when interrupts are disabled
- Add .percent and .graph suffix to histograms to give different outputs
- Add nohitcount to disable showing hitcount in histogram output
- Add new __cpumask() to trace event fields to annotate that a unsigned long
array is a cpumask to user space and should be treated as one.
- Add trace_trigger kernel command line parameter to enable trace event
triggers at boot up. Useful to trace stack traces, disable tracing and take
snapshots.
- Fix x86/kmmio mmio tracer to work with the updates to lockdep
- Unify the panic and die notifiers
- Add back ftrace_expect reference that is used to extract more information in
the ftrace_bug() code.
- Have trigger filter parsing errors show up in the tracing error log.
- Updated MAINTAINERS file to add kernel tracing mailing list and patchwork
info
- Use IDA to keep track of event type numbers.
- And minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY5vIcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlO7AQCmtZbriadAR6N7Llj092YXmYfzrxyi
1WS35vhpZsBJ8gEA8j68l+LrgNt51N2gXlTXEHgXzdBgL/TKAPSX4D99GQY=
=z1pe
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add options to the osnoise tracer:
- 'panic_on_stop' option that panics the kernel if osnoise is
greater than some user defined threshold.
- 'preempt' option, to test noise while preemption is disabled
- 'irq' option, to test noise when interrupts are disabled
- Add .percent and .graph suffix to histograms to give different
outputs
- Add nohitcount to disable showing hitcount in histogram output
- Add new __cpumask() to trace event fields to annotate that a unsigned
long array is a cpumask to user space and should be treated as one.
- Add trace_trigger kernel command line parameter to enable trace event
triggers at boot up. Useful to trace stack traces, disable tracing
and take snapshots.
- Fix x86/kmmio mmio tracer to work with the updates to lockdep
- Unify the panic and die notifiers
- Add back ftrace_expect reference that is used to extract more
information in the ftrace_bug() code.
- Have trigger filter parsing errors show up in the tracing error log.
- Updated MAINTAINERS file to add kernel tracing mailing list and
patchwork info
- Use IDA to keep track of event type numbers.
- And minor fixes and clean ups
* tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
tracing: Fix cpumask() example typo
tracing: Improve panic/die notifiers
ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels
tracing: Do not synchronize freeing of trigger filter on boot up
tracing: Remove pointer (asterisk) and brackets from cpumask_t field
tracing: Have trigger filter parsing errors show up in error_log
x86/mm/kmmio: Remove redundant preempt_disable()
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
Documentation/osnoise: Add osnoise/options documentation
tracing/osnoise: Add preempt and/or irq disabled options
tracing/osnoise: Add PANIC_ON_STOP option
Documentation/osnoise: Escape underscore of NO_ prefix
tracing: Fix some checker warnings
tracing/osnoise: Make osnoise_options static
tracing: remove unnecessary trace_trigger ifdef
ring-buffer: Handle resize in early boot up
tracing/hist: Fix issue of losting command info in error_log
tracing: Fix issue of missing one synthetic field
tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
tracing/hist: Fix wrong return value in parse_action_params()
...
stacktrace filter is checked after others, such as fail-nth, interval and
probability. This make it doesn't work well as expected.
Fix to running stacktrace filter before other filters. It will speed up
fault inject testing for driver modules.
Link: https://lkml.kernel.org/r/20220817080332.1052710-5-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attributes of stack filter are show as unsigned decimal, such as
'require-start', 'require-end'. This patch change to show them as
unsigned hexadecimal for more readable.
Before:
$ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start
$ cat /sys/kernel/debug/failslab/require-start
18446744072638263296
After:
$ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start
$ cat /sys/kernel/debug/failslab/require-start
0xffffffffc0257000
[wangyufen@huawei.com: use debugfs_create_xul() instead of debugfs_create_xl()]
Link: https://lkml.kernel.org/r/1664331299-4976-1-git-send-email-wangyufen@huawei.com
Link: https://lkml.kernel.org/r/20220817080332.1052710-4-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If FAULT_INJECTION_STACKTRACE_FILTER is enabled, the depth is default to
32. This means fail_stacktrace() will iter each entry's stacktrace, even
if filter is not configured.
This patch changes to quick return from fail_stacktrace() if stacktrace
filter is not set.
Link: https://lkml.kernel.org/r/20220817080332.1052710-3-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patchset allow fault injection to run on x86_64 and makes stacktrace
filter work as expected. With this, we can test a device driver module
with fault injection more easily.
This patch (of 4):
FAULT_INJECTION_STACKTRACE_FILTER option was apparently disallowed on
x86_64 because of problems with the stack unwinder:
commit 6d690dcac9
Author: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat May 12 10:36:53 2007 -0700
fault injection: disable stacktrace filter for x86-64
However, there is no problems whatsoever with this today. Let's allow
it again.
Link: https://lkml.kernel.org/r/20220817080332.1052710-1-weiyongjun1@huawei.com
Link: https://lkml.kernel.org/r/20220817080332.1052710-2-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move Sergey to co-maintainer for zram/zsmalloc since he has helped to
contribute/review those areas actively for eight years, which is quite
helpful. Since Nitin has been inactive for several years, it's time to
move his name into CREDITS.
Link: https://lkml.kernel.org/r/20221213170731.796121-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, %p is used to display kernel pointers in backtrace which result
in a hashed value that is not usable to correlate the address for debug.
Use %pK which will respect the kptr_restrict configuration value and thus
allow to extract meaningful information from the backtrace.
Link: https://lkml.kernel.org/r/20221108094322.73492-1-clement.leger@bootlin.com
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add the span to the year of the development.
Link: https://lkml.kernel.org/r/20221025173709.2718725-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have to free via kvfree(), not via kfree().
Link: https://lkml.kernel.org/r/20221212182018.264900-1-david@redhat.com
Fixes: c77369b437 ("mm/gup_test: start/stop/read functionality for PIN LONGTERM test")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=Ufyp
-----END PGP SIGNATURE-----
Merge tag '6.2-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
- SMB3.1.1 POSIX Extensions fixes
- remove use of generic_writepages() and ->cifs_writepage(), in favor
of ->cifs_writepages() and ->migrate_folio()
- memory management fixes
- mount parm parsing fixes
- minor cleanup fixes
* tag '6.2-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove duplicated include in cifsglob.h
cifs: fix oops during encryption
cifs: print warning when conflicting soft vs. hard mount options specified
cifs: fix missing display of three mount options
cifs: fix various whitespace errors in headers
cifs: minor cleanup of some headers
cifs: skip alloc when request has no pages
cifs: remove ->writepage
cifs: stop using generic_writepages
cifs: wire up >migrate_folio
cifs: Parse owner/group for stat in smb311 posix extensions
cifs: Add "extbuf" and "extbuflen" args to smb2_compound_op()
Fix path in cifs/usage.rst
bigger updates, the rest is driver updates all over the place
-----BEGIN PGP SIGNATURE-----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=/It5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core got a new helper 'i2c_client_get_device_id()', designware got
some bigger updates, the rest is driver updates all over the place"
* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: xiic: Make sure to disable clock on .remove()
i2c: hisi: Add support to get clock frequency from clock
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
i2c: slave-eeprom: Convert to i2c's .probe_new()
i2c: mux: pca954x: Convert to i2c's .probe_new()
drivers/i2c: use simple i2c probe
i2c: mux: pca9541: switch to using .probe_new
i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
i2c: qcom-geni: add support for I2C Master Hub variant
i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
soc: qcom: geni-se: add desc struct to specify clocks from device match data
dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
i2c: tegra: Set ACPI node as primary fwnode
i2c: smbus: add DDR support for SPD
i2c: /pasemi: PASemi I2C controller IRQ enablement
...
- Replace deprecated git://github.com link in MAINTAINERS. (Palmer Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper. (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call. (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor.
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove
a temporary workaround. (Eric Farman)
- Add an interface to get an estimated migration data size for a device,
allowing userspace to make informed decisions, ex. more accurately
predicting VM downtime. (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration. (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module.
(Jason Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers. (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state
size. (Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices. (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe.
(Shang XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing. (Dan Carpenter)
-----BEGIN PGP SIGNATURE-----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=q9xs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a9:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a9: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
There are a few kernel users like kfence that require 4k pages to work
correctly and do not support large mappings. They use set_memory_4k()
to break down those large mappings.
That, in turn relies on cpa_data->force_split option to indicate to
set_memory code that it should split page tables regardless of whether
the need to be.
But, a recent change added an optimization which would return early
if a set_memory request came in that did not change permissions. It
did not consult ->force_split and would mistakenly optimize away the
splitting that set_memory_4k() needs. This broke kfence.
Skip the same-permission optimization when ->force_split is set.
Fixes: 127960a05548 ("x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/CA+G9fYuFxZTxkeS35VTZMXwQvohu73W3xbZ5NtjebsVvH6hCuA@mail.gmail.com/
Popuplate the shadow for the shared portion of the CPU entry area, i.e.
the read-only IDT mapping, during KASAN initialization. A recent change
modified KASAN to map the per-CPU areas on-demand, but forgot to keep a
shadow for the common area that is shared amongst all CPUs.
Map the common area in KASAN init instead of letting idt_map_in_cea() do
the dirty work so that it Just Works in the unlikely event more shared
data is shoved into the CPU entry area.
The bug manifests as a not-present #PF when software attempts to lookup
an IDT entry, e.g. when KVM is handling IRQs on Intel CPUs (KVM performs
direct CALL to the IRQ handler to avoid the overhead of INTn):
BUG: unable to handle page fault for address: fffffbc0000001d8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 16c03a067 P4D 16c03a067 PUD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 5 PID: 901 Comm: repro Tainted: G W 6.1.0-rc3+ #410
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kasan_check_range+0xdf/0x190
vmx_handle_exit_irqoff+0x152/0x290 [kvm_intel]
vcpu_run+0x1d89/0x2bd0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3ce/0xa70 [kvm]
kvm_vcpu_ioctl+0x349/0x900 [kvm]
__x64_sys_ioctl+0xb8/0xf0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 9fd429c28073 ("x86/kasan: Map shadow for percpu pages on demand")
Reported-by: syzbot+8cdd16fd5a6c0565e227@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221110203504.1985010-6-seanjc@google.com
Add helpers to dedup code for aligning shadow address up/down to page
boundaries when translating an address to its shadow.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Link: https://lkml.kernel.org/r/20221110203504.1985010-5-seanjc@google.com
Rename the CPU entry area variables in kasan_init() to shorten their
names, a future fix will reference the beginning of the per-CPU portion
of the CPU entry area, and shadow_cpu_entry_per_cpu_begin is a bit much.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Link: https://lkml.kernel.org/r/20221110203504.1985010-4-seanjc@google.com
Populate a KASAN shadow for the entire possible per-CPU range of the CPU
entry area instead of requiring that each individual chunk map a shadow.
Mapping shadows individually is error prone, e.g. the per-CPU GDT mapping
was left behind, which can lead to not-present page faults during KASAN
validation if the kernel performs a software lookup into the GDT. The DS
buffer is also likely affected.
The motivation for mapping the per-CPU areas on-demand was to avoid
mapping the entire 512GiB range that's reserved for the CPU entry area,
shaving a few bytes by not creating shadows for potentially unused memory
was not a goal.
The bug is most easily reproduced by doing a sigreturn with a garbage
CS in the sigcontext, e.g.
int main(void)
{
struct sigcontext regs;
syscall(__NR_mmap, 0x1ffff000ul, 0x1000ul, 0ul, 0x32ul, -1, 0ul);
syscall(__NR_mmap, 0x20000000ul, 0x1000000ul, 7ul, 0x32ul, -1, 0ul);
syscall(__NR_mmap, 0x21000000ul, 0x1000ul, 0ul, 0x32ul, -1, 0ul);
memset(®s, 0, sizeof(regs));
regs.cs = 0x1d0;
syscall(__NR_rt_sigreturn);
return 0;
}
to coerce the kernel into doing a GDT lookup to compute CS.base when
reading the instruction bytes on the subsequent #GP to determine whether
or not the #GP is something the kernel should handle, e.g. to fixup UMIP
violations or to emulate CLI/STI for IOPL=3 applications.
BUG: unable to handle page fault for address: fffffbc8379ace00
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 16c03a067 P4D 16c03a067 PUD 15b990067 PMD 15b98f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 851 Comm: r2 Not tainted 6.1.0-rc3-next-20221103+ #432
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kasan_check_range+0xdf/0x190
Call Trace:
<TASK>
get_desc+0xb0/0x1d0
insn_get_seg_base+0x104/0x270
insn_fetch_from_user+0x66/0x80
fixup_umip_exception+0xb1/0x530
exc_general_protection+0x181/0x210
asm_exc_general_protection+0x22/0x30
RIP: 0003:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0003:0000000000000000 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000001d0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 9fd429c28073 ("x86/kasan: Map shadow for percpu pages on demand")
Reported-by: syzbot+ffb4f000dc2872c93f62@syzkaller.appspotmail.com
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Link: https://lkml.kernel.org/r/20221110203504.1985010-3-seanjc@google.com
Linus Torvalds
Marc Zyngier
Arnd Bergmann
Thomas Gleixner
Alexander Gordeev
Michael Ellerman
Arnaldo Carvalho de Melo
Wei Yongjun
Minchan Kim
Clément Léger
Zhaoyang Huang
Liam Howlett
David Hildenbrand
Dave Hansen
Sean Christopherson