Write the sysfs node to set touch sensitivity mode when the property
changes.
Bug: 199104397
Test: toggle the touch sensitivity button in Settings and check log.
Change-Id: Ib64277c807e7c45f8542a6d6c355de4ec53c1a33
Signed-off-by: Wendly Li <wendlyli@google.com>
* Enable LE Audio Offload
* Enable A2DP offload
* Move the LE Audio setting to bluetooth/qti_default.mk
Bug: 235311609
Test: Manual, make sure the le audio and A2dp offload is enabled by default
Change-Id: I943837579331952ece3b860b08527d0e812766c5
1) Change the default trip_point_1_temp and trip_point_2_temp in accordance to new config provided by hardware.
2) Removing AUR nodes
Bug: 233329602
Test: Used local build to verify the trip_point_1_temp & trip_point_2_temp when VIRTUAL_SKIN
severity is changed on updating quiet_therm temp.
Change-Id: I267032c23c22952e5eea106ca3b84a8cd74729a0
Cherry-pick the overlay resource to L10.
Bug: 230552025
Test: local build passed.
Change-Id: Idc0983536646928bc6d88a9f8f0d4db14b288b29
(cherry picked from commit b01989f3d7)
Change list :
1. adjust IIR for flat FR in camcorder and mic path.
2. check in the latest parameters from C10/P10
Bug: 236802184
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I1038eae584efa9209f6ba28d4783457e35aa7757
AAC VBR is more preferred than CBR for A2DP playback. This also moves
those A2DP system properties into the product partition.
Bug: 112325138
Test: dumpsys bluetooth_manager
Change-Id: I4496d44309faa805059147166c681777c59c4566
Update target load due to Pro mid CPU
this hint impact the high streaming use case like 60fps / 120fps and
240fps.
Bug: 236682655
Test: GCA
Change-Id: I0f486e44267d30efa12b6c30ebf1d7aea8989892
ag/18185767 corresponding to the change in mixer command
Bug: 235866657
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4417096aa337f07d5bd526c51db6b2da7d2068db
Remove duplicated manifests which are included at bluetooth/manifest_bluetooth.xml.
Bug: 203055537
Test: lshal to see Bluetooth HAL services
Change-Id: Ib39f208245c9ef476285898606289d29717ed8ca
Merged-In: Ib39f208245c9ef476285898606289d29717ed8ca
Sync the indoor range mapping in
the indoor auto-brightness curve.
Bug: 234416291
Test: Check the default curve value
Change-Id: Ia0e3bdf2bd19533f31f0a97a7c80ec13d7cbd0a7
Change list:
L10 proto 1.1 tuning with 0520 FIR filter
Test: manual
Bug: 223513454
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Iad5c01a9e2593abe764e9e996073783127b60a8a
This reverts commit bf8693dd6d.
Reason for revert: re-enable thermal throttling protection with the
virtual sensor formula.
Bug: 231404311
Test: thermal throttling worked properly.
Change-Id: I99020b5b30a6a9ada0f51974161d262b9d37667c
Create config.xml to support device suspend when screen off due to
p-sensor and enable adapative brightness. Modify auto brightness
table to support 1000 nits in HBM mode.
Bug: 224527764
Test: brightness and adaptive brightness manual test
Change-Id: I2d3bbd19fa33ca4713127b0b0f4ad39dc39c1175
Change list:
For waves_preset.mps
It increases top speaker excursion and reduce temperature to get better performance.
For audio_policy_volumes.xml
It changes volume curve to accompany with waves_preset.mps, which helps to get linear volume curve.
I also change DTMF, Ringtone, System sound volume curve to satisfy user expectation.
Bug: 234094724
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I085089de96d366480c70da6d86e6d7983033a631
