From cee7013be9b71082c7ea63c46850157aaa1bf4b1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 16 Oct 2018 11:24:47 +0200 Subject: mac80211: allow drivers to use peer measurement API There's nothing much for mac80211 to do, so only pass through the requests with minimal checks and tracing. The driver must call cfg80211's results APIs. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 51622333d460..2fccccfbbf4d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3849,6 +3849,26 @@ ieee80211_get_ftm_responder_stats(struct wiphy *wiphy, return drv_get_ftm_responder_stats(local, sdata, ftm_stats); } +static int +ieee80211_start_pmsr(struct wiphy *wiphy, struct wireless_dev *dev, + struct cfg80211_pmsr_request *request) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev); + + return drv_start_pmsr(local, sdata, request); +} + +static void +ieee80211_abort_pmsr(struct wiphy *wiphy, struct wireless_dev *dev, + struct cfg80211_pmsr_request *request) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev); + + return drv_abort_pmsr(local, sdata, request); +} + const struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, @@ -3944,4 +3964,6 @@ const struct cfg80211_ops mac80211_config_ops = { .tx_control_port = ieee80211_tx_control_port, .get_txq_stats = ieee80211_get_txq_stats, .get_ftm_responder_stats = ieee80211_get_ftm_responder_stats, + .start_pmsr = ieee80211_start_pmsr, + .abort_pmsr = ieee80211_abort_pmsr, }; -- cgit From 01d66fbd5b18ac9f01a6a2ae1278189d19208ad5 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 25 Oct 2018 17:36:34 -0400 Subject: {nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconf When userspace is controlling mesh routing, it may have better knowledge about whether a mesh STA is connected to a mesh gate than the kernel mpath table. Add dot11MeshConnectedToMeshGate to the mesh config so that such applications can explicitly signal that a mesh STA is connected to a gate, which will then be advertised in the beacon. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++++ include/uapi/linux/nl80211.h | 8 +++++++- net/mac80211/cfg.c | 3 +++ net/mac80211/debugfs_netdev.c | 3 +++ net/mac80211/mesh.c | 3 ++- net/wireless/nl80211.c | 8 +++++++- 6 files changed, 27 insertions(+), 3 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 24d2db8e082d..16d595b93ba3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1562,6 +1562,10 @@ struct bss_parameters { * @plink_timeout: If no tx activity is seen from a STA we've established * peering with for longer than this time (in seconds), then remove it * from the STA's list of peers. Default is 30 minutes. + * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is + * connected to a mesh gate in mesh formation info. If false, the + * value in mesh formation is determined by the presence of root paths + * in the mesh path table */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1581,6 +1585,7 @@ struct mesh_config { u16 dot11MeshHWMPperrMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; + bool dot11MeshConnectedToMeshGate; u16 dot11MeshHWMPRannInterval; bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ff6005edf32f..51bd85b7d839 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3117,7 +3117,7 @@ enum nl80211_sta_bss_param { * some packets with an FCS error due to TA corruption. Hence this counter * might not be fully accurate. * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a - * mesh gate + * mesh gate (u8, 0 or 1) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3940,6 +3940,11 @@ enum nl80211_mesh_power_mode { * remove it from the STA's list of peers. You may set this to 0 to disable * the removal of the STA. Default is 30 minutes. * + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA + * will advertise that it is connected to a gate in the mesh formation + * field. If left unset then the mesh formation field will only + * advertise such if there is an active root mesh path. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -3972,6 +3977,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, + NL80211_MESHCONF_CONNECTED_TO_GATE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 2fccccfbbf4d..cf8f946ae724 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2028,6 +2028,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, nconf->dot11MeshAwakeWindowDuration; if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask)) conf->plink_timeout = nconf->plink_timeout; + if (_chg_mesh_attr(NL80211_MESHCONF_CONNECTED_TO_GATE, mask)) + conf->dot11MeshConnectedToMeshGate = + nconf->dot11MeshConnectedToMeshGate; ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); return 0; } diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index c813207bb123..cff0fb3578c9 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -641,6 +641,8 @@ IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval, IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC); IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration, u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC); +IEEE80211_IF_FILE(dot11MeshConnectedToMeshGate, + u.mesh.mshcfg.dot11MeshConnectedToMeshGate, DEC); #endif #define DEBUGFS_ADD_MODE(name, mode) \ @@ -762,6 +764,7 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval); MESHPARAMS_ADD(power_mode); MESHPARAMS_ADD(dot11MeshAwakeWindowDuration); + MESHPARAMS_ADD(dot11MeshConnectedToMeshGate); #undef MESHPARAMS_ADD } #endif diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 19205c821dee..4869280a6413 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -255,7 +255,8 @@ int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, u8 *pos, neighbors; u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); bool is_connected_to_gate = ifmsh->num_gates > 0 || - ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol; + ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol || + ifmsh->mshcfg.dot11MeshConnectedToMeshGate; if (skb_tailroom(skb) < 2 + meshconf_len) return -ENOMEM; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f231059242cc..d5f0ffd076b2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6275,7 +6275,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW, cur_params.dot11MeshAwakeWindowDuration) || nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT, - cur_params.plink_timeout)) + cur_params.plink_timeout) || + nla_put_u8(msg, NL80211_MESHCONF_CONNECTED_TO_GATE, + cur_params.dot11MeshConnectedToMeshGate)) goto nla_put_failure; nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); @@ -6332,6 +6334,7 @@ nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] = { NL80211_MESH_POWER_MAX), [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 }, [NL80211_MESHCONF_PLINK_TIMEOUT] = { .type = NLA_U32 }, + [NL80211_MESHCONF_CONNECTED_TO_GATE] = NLA_POLICY_RANGE(NLA_U8, 0, 1), }; static const struct nla_policy @@ -6443,6 +6446,9 @@ do { \ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_s32); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConnectedToMeshGate, mask, + NL80211_MESHCONF_CONNECTED_TO_GATE, + nla_get_u8); /* * Check HT operation mode based on * IEEE 802.11-2016 9.4.2.57 HT Operation element. -- cgit From 554be8333088e4a40f4b522c2b36ab23fb22f4be Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 15 Dec 2018 11:03:24 +0200 Subject: mac80211: ftm responder: remove pointless defensive coding The pointer and corresponding length is always set in pairs in cfg80211, so no need to have this strange defensive check that also confuses static checkers. Clean it up. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index cf8f946ae724..567c63ff830f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -800,8 +800,8 @@ static int ieee80211_set_ftm_responder_params( u8 *pos; int len; - if ((!lci || !lci_len) && (!civicloc || !civicloc_len)) - return 1; + if (!lci_len && !civicloc_len) + return 0; bss_conf = &sdata->vif.bss_conf; old = bss_conf->ftmr_params; -- cgit