From e12dee18b89f1b0d4fc070eda4843f9d806645ca Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 19 Apr 2023 10:44:18 +0800 Subject: powercap: intel_rapl: Introduce core support for TPMI interface Compared with existing RAPL MSR/MMIO Interface, the RAPL TPMI Interface 1. has per Power Limit register, thus has per Power Limit Lock and Enable bit. 2. doesn't have Power Limit Clamp bit. 3. the Power Limit Lock and Enable bits have different bit offsets. These mean RAPL TPMI Interface needs its own primitive information. RAPL TPMI Interface also has per domain unit register but with a different register layout. This requires a TPMI specific rapl_defaults call to decode the unit register. Introduce the RAPL core support for TPMI Interface. Signed-off-by: Zhang Rui Tested-by: Wang Wendy Signed-off-by: Rafael J. Wysocki --- include/linux/intel_rapl.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h index 65f358b64096..e6936cb25047 100644 --- a/include/linux/intel_rapl.h +++ b/include/linux/intel_rapl.h @@ -17,6 +17,7 @@ enum rapl_if_type { RAPL_IF_MSR, /* RAPL I/F using MSR registers */ RAPL_IF_MMIO, /* RAPL I/F using MMIO registers */ + RAPL_IF_TPMI, /* RAPL I/F using TPMI registers */ }; enum rapl_domain_type { @@ -36,6 +37,7 @@ enum rapl_domain_reg_id { RAPL_DOMAIN_REG_INFO, RAPL_DOMAIN_REG_PL4, RAPL_DOMAIN_REG_UNIT, + RAPL_DOMAIN_REG_PL2, RAPL_DOMAIN_REG_MAX, }; @@ -48,6 +50,9 @@ enum rapl_primitives { ENERGY_COUNTER, FW_LOCK, FW_HIGH_LOCK, + PL1_LOCK, + PL2_LOCK, + PL4_LOCK, PL1_ENABLE, /* power limit 1, aka long term */ PL1_CLAMP, /* allow frequency to go below OS request */ -- cgit