From c781ff12a2f37a9795e13bf328e5053d3e69f9e0 Mon Sep 17 00:00:00 2001 From: Vladyslav Tarasiuk Date: Fri, 9 Apr 2021 11:06:34 +0300 Subject: ethtool: Allow network drivers to dump arbitrary EEPROM data Define get_module_eeprom_by_page() ethtool callback and implement netlink infrastructure. get_module_eeprom_by_page() allows network drivers to dump a part of module's EEPROM specified by page and bank numbers along with offset and length. It is effectively a netlink replacement for get_module_info() and get_module_eeprom() pair, which is needed due to emergence of complex non-linear EEPROM layouts. Signed-off-by: Vladyslav Tarasiuk Signed-off-by: David S. Miller --- include/linux/ethtool.h | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 4290e2fa3117..9f6f323af59a 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -81,6 +81,7 @@ enum { #define ETH_RSS_HASH_NO_CHANGE 0 struct net_device; +struct netlink_ext_ack; /* Some generic methods drivers may use in their ethtool_ops */ u32 ethtool_op_get_link(struct net_device *dev); @@ -262,6 +263,31 @@ struct ethtool_pause_stats { u64 rx_pause_frames; }; +#define ETH_MODULE_EEPROM_PAGE_LEN 128 +#define ETH_MODULE_MAX_I2C_ADDRESS 0x7f + +/** + * struct ethtool_module_eeprom - EEPROM dump from specified page + * @offset: Offset within the specified EEPROM page to begin read, in bytes. + * @length: Number of bytes to read. + * @page: Page number to read from. + * @bank: Page bank number to read from, if applicable by EEPROM spec. + * @i2c_address: I2C address of a page. Value less than 0x7f expected. Most + * EEPROMs use 0x50 or 0x51. + * @data: Pointer to buffer with EEPROM data of @length size. + * + * This can be used to manage pages during EEPROM dump in ethtool and pass + * required information to the driver. + */ +struct ethtool_module_eeprom { + __u32 offset; + __u32 length; + __u8 page; + __u8 bank; + __u8 i2c_address; + __u8 *data; +}; + /** * struct ethtool_ops - optional netdev operations * @cap_link_lanes_supported: indicates if the driver supports lanes @@ -414,6 +440,9 @@ struct ethtool_pause_stats { * cannot use the standard PHY library helpers. * @get_phy_tunable: Read the value of a PHY tunable. * @set_phy_tunable: Set the value of a PHY tunable. + * @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from + * specified page. Returns a negative error code or the amount of bytes + * read. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must @@ -519,6 +548,9 @@ struct ethtool_ops { const struct ethtool_tunable *, void *); int (*set_phy_tunable)(struct net_device *, const struct ethtool_tunable *, const void *); + int (*get_module_eeprom_by_page)(struct net_device *dev, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack); }; int ethtool_check_ops(const struct ethtool_ops *ops); @@ -542,7 +574,6 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev, const struct ethtool_link_ksettings *cmd, u32 *dev_speed, u8 *dev_duplex); -struct netlink_ext_ack; struct phy_device; struct phy_tdr_config; -- cgit From e19b0a3474ab9ef90dd110af9f39fc87329755f1 Mon Sep 17 00:00:00 2001 From: Vladyslav Tarasiuk Date: Fri, 9 Apr 2021 11:06:35 +0300 Subject: net/mlx5: Refactor module EEPROM query Prepare for ethtool_ops::get_module_eeprom_data() implementation by extracting common part of mlx5_query_module_eeprom() into a separate function. Signed-off-by: Vladyslav Tarasiuk Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 79 +++++++++++++++----------- include/linux/mlx5/port.h | 9 +++ 2 files changed, 54 insertions(+), 34 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 4bb219565c58..9b9f870d67a4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -353,67 +353,78 @@ static void mlx5_sfp_eeprom_params_set(u16 *i2c_addr, int *page_num, u16 *offset *offset -= MLX5_EEPROM_PAGE_LENGTH; } -int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, - u16 offset, u16 size, u8 *data) +static int mlx5_query_mcia(struct mlx5_core_dev *dev, + struct mlx5_module_eeprom_query_params *params, u8 *data) { - int module_num, status, err, page_num = 0; u32 in[MLX5_ST_SZ_DW(mcia_reg)] = {}; u32 out[MLX5_ST_SZ_DW(mcia_reg)]; - u16 i2c_addr = 0; - u8 module_id; + int status, err; void *ptr; + u16 size; + + size = min_t(int, params->size, MLX5_EEPROM_MAX_BYTES); + + MLX5_SET(mcia_reg, in, l, 0); + MLX5_SET(mcia_reg, in, size, size); + MLX5_SET(mcia_reg, in, module, params->module_number); + MLX5_SET(mcia_reg, in, device_address, params->offset); + MLX5_SET(mcia_reg, in, page_number, params->page); + MLX5_SET(mcia_reg, in, i2c_device_address, params->i2c_address); - err = mlx5_query_module_num(dev, &module_num); + err = mlx5_core_access_reg(dev, in, sizeof(in), out, + sizeof(out), MLX5_REG_MCIA, 0, 0); if (err) return err; - err = mlx5_query_module_id(dev, module_num, &module_id); + status = MLX5_GET(mcia_reg, out, status); + if (status) { + mlx5_core_err(dev, "query_mcia_reg failed: status: 0x%x\n", + status); + return -EIO; + } + + ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0); + memcpy(data, ptr, size); + + return size; +} + +int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, + u16 offset, u16 size, u8 *data) +{ + struct mlx5_module_eeprom_query_params query = {0}; + u8 module_id; + int err; + + err = mlx5_query_module_num(dev, &query.module_number); + if (err) + return err; + + err = mlx5_query_module_id(dev, query.module_number, &module_id); if (err) return err; switch (module_id) { case MLX5_MODULE_ID_SFP: - mlx5_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset); + mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset); break; case MLX5_MODULE_ID_QSFP: case MLX5_MODULE_ID_QSFP_PLUS: case MLX5_MODULE_ID_QSFP28: - mlx5_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset); + mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset); break; default: mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id); return -EINVAL; } - if (offset + size > MLX5_EEPROM_PAGE_LENGTH) + if (query.offset + size > MLX5_EEPROM_PAGE_LENGTH) /* Cross pages read, read until offset 256 in low page */ size -= offset + size - MLX5_EEPROM_PAGE_LENGTH; - size = min_t(int, size, MLX5_EEPROM_MAX_BYTES); + query.size = size; - MLX5_SET(mcia_reg, in, l, 0); - MLX5_SET(mcia_reg, in, module, module_num); - MLX5_SET(mcia_reg, in, i2c_device_address, i2c_addr); - MLX5_SET(mcia_reg, in, page_number, page_num); - MLX5_SET(mcia_reg, in, device_address, offset); - MLX5_SET(mcia_reg, in, size, size); - - err = mlx5_core_access_reg(dev, in, sizeof(in), out, - sizeof(out), MLX5_REG_MCIA, 0, 0); - if (err) - return err; - - status = MLX5_GET(mcia_reg, out, status); - if (status) { - mlx5_core_err(dev, "query_mcia_reg failed: status: 0x%x\n", - status); - return -EIO; - } - - ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0); - memcpy(data, ptr, size); - - return size; + return mlx5_query_mcia(dev, &query, data); } EXPORT_SYMBOL_GPL(mlx5_query_module_eeprom); diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h index 23edd2db4803..90b87aa82db3 100644 --- a/include/linux/mlx5/port.h +++ b/include/linux/mlx5/port.h @@ -62,6 +62,15 @@ enum mlx5_an_status { #define MLX5_EEPROM_PAGE_LENGTH 256 #define MLX5_EEPROM_HIGH_PAGE_LENGTH 128 +struct mlx5_module_eeprom_query_params { + u16 size; + u16 offset; + u16 i2c_address; + u32 page; + u32 bank; + u32 module_number; +}; + enum mlx5e_link_mode { MLX5E_1000BASE_CX_SGMII = 0, MLX5E_1000BASE_KX = 1, -- cgit From e109d2b204daa223e6d3cdaa369071c3ea96dcbf Mon Sep 17 00:00:00 2001 From: Vladyslav Tarasiuk Date: Fri, 9 Apr 2021 11:06:36 +0300 Subject: net/mlx5: Implement get_module_eeprom_by_page() Implement ethtool_ops::get_module_eeprom_by_page() to enable support of new SFP standards. Signed-off-by: Vladyslav Tarasiuk Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 44 ++++++++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/port.c | 41 ++++++++++++++++++++ include/linux/mlx5/port.h | 2 + 3 files changed, 87 insertions(+) (limited to 'include/linux') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index b185a0452629..c8057a44d5ab 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1770,6 +1770,49 @@ static int mlx5e_get_module_eeprom(struct net_device *netdev, return 0; } +static int mlx5e_get_module_eeprom_by_page(struct net_device *netdev, + const struct ethtool_module_eeprom *page_data, + struct netlink_ext_ack *extack) +{ + struct mlx5e_priv *priv = netdev_priv(netdev); + struct mlx5_module_eeprom_query_params query; + struct mlx5_core_dev *mdev = priv->mdev; + u8 *data = page_data->data; + int size_read; + int i = 0; + + if (!page_data->length) + return -EINVAL; + + memset(data, 0, page_data->length); + + query.offset = page_data->offset; + query.i2c_address = page_data->i2c_address; + query.bank = page_data->bank; + query.page = page_data->page; + while (i < page_data->length) { + query.size = page_data->length - i; + size_read = mlx5_query_module_eeprom_by_page(mdev, &query, data + i); + + /* Done reading, return how many bytes was read */ + if (!size_read) + return i; + + if (size_read == -EINVAL) + return -EINVAL; + if (size_read < 0) { + netdev_err(priv->netdev, "%s: mlx5_query_module_eeprom_by_page failed:0x%x\n", + __func__, size_read); + return i; + } + + i += size_read; + query.offset += size_read; + } + + return i; +} + int mlx5e_ethtool_flash_device(struct mlx5e_priv *priv, struct ethtool_flash *flash) { @@ -2159,6 +2202,7 @@ const struct ethtool_ops mlx5e_ethtool_ops = { .set_wol = mlx5e_set_wol, .get_module_info = mlx5e_get_module_info, .get_module_eeprom = mlx5e_get_module_eeprom, + .get_module_eeprom_by_page = mlx5e_get_module_eeprom_by_page, .flash_device = mlx5e_flash_device, .get_priv_flags = mlx5e_get_priv_flags, .set_priv_flags = mlx5e_set_priv_flags, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 9b9f870d67a4..522a41f8f1e2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -428,6 +428,47 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, } EXPORT_SYMBOL_GPL(mlx5_query_module_eeprom); +int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev, + struct mlx5_module_eeprom_query_params *params, + u8 *data) +{ + u8 module_id; + int err; + + err = mlx5_query_module_num(dev, ¶ms->module_number); + if (err) + return err; + + err = mlx5_query_module_id(dev, params->module_number, &module_id); + if (err) + return err; + + switch (module_id) { + case MLX5_MODULE_ID_SFP: + if (params->page > 0) + return -EINVAL; + break; + case MLX5_MODULE_ID_QSFP: + case MLX5_MODULE_ID_QSFP28: + case MLX5_MODULE_ID_QSFP_PLUS: + if (params->page > 3) + return -EINVAL; + break; + default: + mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id); + return -EINVAL; + } + + if (params->i2c_address != MLX5_I2C_ADDR_HIGH && + params->i2c_address != MLX5_I2C_ADDR_LOW) { + mlx5_core_err(dev, "I2C address not recognized: 0x%x\n", params->i2c_address); + return -EINVAL; + } + + return mlx5_query_mcia(dev, params, data); +} +EXPORT_SYMBOL_GPL(mlx5_query_module_eeprom_by_page); + static int mlx5_query_port_pvlc(struct mlx5_core_dev *dev, u32 *pvlc, int pvlc_size, u8 local_port) { diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h index 90b87aa82db3..58d56adb9842 100644 --- a/include/linux/mlx5/port.h +++ b/include/linux/mlx5/port.h @@ -209,6 +209,8 @@ void mlx5_query_port_fcs(struct mlx5_core_dev *mdev, bool *supported, bool *enabled); int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, u16 offset, u16 size, u8 *data); +int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev, + struct mlx5_module_eeprom_query_params *params, u8 *data); int mlx5_query_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *out); int mlx5_set_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *in); -- cgit From 4c88fa412a100f925b8ab1aa952a672895f69d35 Mon Sep 17 00:00:00 2001 From: Vladyslav Tarasiuk Date: Fri, 9 Apr 2021 11:06:37 +0300 Subject: net/mlx5: Add support for DSFP module EEPROM dumps Allow the driver to recognise DSFP transceiver module ID and therefore allow its EEPROM dumps using ethtool. Signed-off-by: Vladyslav Tarasiuk Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 2 ++ include/linux/mlx5/port.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 522a41f8f1e2..1ef2b6a848c1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -454,6 +454,8 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev, if (params->page > 3) return -EINVAL; break; + case MLX5_MODULE_ID_DSFP: + break; default: mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id); return -EINVAL; diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h index 58d56adb9842..77ea4f9c5265 100644 --- a/include/linux/mlx5/port.h +++ b/include/linux/mlx5/port.h @@ -45,6 +45,7 @@ enum mlx5_module_id { MLX5_MODULE_ID_QSFP = 0xC, MLX5_MODULE_ID_QSFP_PLUS = 0xD, MLX5_MODULE_ID_QSFP28 = 0x11, + MLX5_MODULE_ID_DSFP = 0x1B, }; enum mlx5_an_status { -- cgit From d740513f05a24b1a46722325974223980f068728 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 9 Apr 2021 11:06:40 +0300 Subject: phy: sfp: add netlink SFP support to generic SFP code The new netlink API for reading SFP data requires a new op to be implemented. The idea of the new netlink SFP code is that userspace is responsible to parsing the EEPROM data and requesting pages, rather than have the kernel decide what pages are interesting and returning them. This allows greater flexibility for newer formats. Currently the generic SFP code only supports simple SFPs. Allow i2c address 0x50 and 0x51 to be accessed with page and bank must always be 0. This interface will later be extended when for example QSFP support is added. Signed-off-by: Andrew Lunn Signed-off-by: Vladyslav Tarasiuk Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 20 ++++++++++++++++++++ drivers/net/phy/sfp.c | 25 +++++++++++++++++++++++++ drivers/net/phy/sfp.h | 3 +++ include/linux/sfp.h | 10 ++++++++++ 4 files changed, 58 insertions(+) (limited to 'include/linux') diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 2e11176c6b94..e61de66e973b 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -555,6 +555,26 @@ int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, } EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); +/** + * sfp_get_module_eeprom_by_page() - Read a page from the SFP module EEPROM + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @page: a &struct ethtool_module_eeprom + * @extack: extack for reporting problems + * + * Read an EEPROM page as specified by the supplied @page. See the + * documentation for &struct ethtool_module_eeprom for the page to be read. + * + * Returns 0 on success or a negative errno number. More error + * information might be provided via extack + */ +int sfp_get_module_eeprom_by_page(struct sfp_bus *bus, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack) +{ + return bus->socket_ops->module_eeprom_by_page(bus->sfp, page, extack); +} +EXPORT_SYMBOL_GPL(sfp_get_module_eeprom_by_page); + /** * sfp_upstream_start() - Inform the SFP that the network device is up * @bus: a pointer to the &struct sfp_bus structure for the sfp module diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 7998acc689b7..37f722c763d7 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -2330,6 +2330,30 @@ static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, return 0; } +static int sfp_module_eeprom_by_page(struct sfp *sfp, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack) +{ + if (page->bank) { + NL_SET_ERR_MSG(extack, "Banks not supported"); + return -EOPNOTSUPP; + } + + if (page->page) { + NL_SET_ERR_MSG(extack, "Only page 0 supported"); + return -EOPNOTSUPP; + } + + if (page->i2c_address != 0x50 && + page->i2c_address != 0x51) { + NL_SET_ERR_MSG(extack, "Only address 0x50 and 0x51 supported"); + return -EOPNOTSUPP; + } + + return sfp_read(sfp, page->i2c_address == 0x51, page->offset, + page->data, page->length); +}; + static const struct sfp_socket_ops sfp_module_ops = { .attach = sfp_attach, .detach = sfp_detach, @@ -2337,6 +2361,7 @@ static const struct sfp_socket_ops sfp_module_ops = { .stop = sfp_stop, .module_info = sfp_module_info, .module_eeprom = sfp_module_eeprom, + .module_eeprom_by_page = sfp_module_eeprom_by_page, }; static void sfp_timeout(struct work_struct *work) diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h index b83f70526270..27226535c72b 100644 --- a/drivers/net/phy/sfp.h +++ b/drivers/net/phy/sfp.h @@ -14,6 +14,9 @@ struct sfp_socket_ops { int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo); int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee, u8 *data); + int (*module_eeprom_by_page)(struct sfp *sfp, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack); }; int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev); diff --git a/include/linux/sfp.h b/include/linux/sfp.h index 38893e4dd0f0..302094b855fb 100644 --- a/include/linux/sfp.h +++ b/include/linux/sfp.h @@ -542,6 +542,9 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus, int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo); int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, u8 *data); +int sfp_get_module_eeprom_by_page(struct sfp_bus *bus, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack); void sfp_upstream_start(struct sfp_bus *bus); void sfp_upstream_stop(struct sfp_bus *bus); void sfp_bus_put(struct sfp_bus *bus); @@ -587,6 +590,13 @@ static inline int sfp_get_module_eeprom(struct sfp_bus *bus, return -EOPNOTSUPP; } +static inline int sfp_get_module_eeprom_by_page(struct sfp_bus *bus, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack) +{ + return -EOPNOTSUPP; +} + static inline void sfp_upstream_start(struct sfp_bus *bus) { } -- cgit