From 9705ecc5c1f8f34f756164a711b4cc61110c0283 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:23:12 +0530 Subject: pcf50633_charger: Enable periodic charging restart The battery charger state machine switches into charging mode when the battery voltage falls below 96% of a battery float voltage. But the voltage drop in Li-ion batteries is marginal(1~2 %) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 80%. This work_struct function restarts charging at regular intervals to make sure the battery doesn't discharge too much. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 4455b212d75a..c8f51c3c0a72 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,6 +29,8 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; + int charging_restart_interval; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit From cc52a29e6245acd9032fcfa0ffcab4cc612de986 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:22:55 +0530 Subject: pcf50633_charger: Remove unused mbc_set_status function The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- drivers/power/pcf50633-charger.c | 15 --------------- include/linux/mfd/pcf50633/mbc.h | 1 - 2 files changed, 16 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 1fe1e851a8dd..e8b278f71781 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -106,21 +106,6 @@ int pcf50633_mbc_get_status(struct pcf50633 *pcf) } EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status); -void pcf50633_mbc_set_status(struct pcf50633 *pcf, int what, int status) -{ - struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); - - if (what & PCF50633_MBC_USB_ONLINE) - mbc->usb_online = !!status; - if (what & PCF50633_MBC_USB_ACTIVE) - mbc->usb_active = !!status; - if (what & PCF50633_MBC_ADAPTER_ONLINE) - mbc->adapter_online = !!status; - if (what & PCF50633_MBC_ADAPTER_ACTIVE) - mbc->adapter_active = !!status; -} -EXPORT_SYMBOL_GPL(pcf50633_mbc_set_status); - static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr, char *buf) { diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 6e17619b773a..4119579acf2c 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,7 +128,6 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); -void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); #endif -- cgit From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- drivers/power/pda_power.c | 89 ++++++++++++++++++++++++++++++++++++++++------- include/linux/pda_power.h | 2 ++ 2 files changed, 79 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index b56a704409d2..a232de6a5703 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -12,11 +12,14 @@ #include #include +#include #include #include #include +#include #include #include +#include static inline unsigned int get_irq_flags(struct resource *res) { @@ -35,6 +38,11 @@ static struct timer_list supply_timer; static struct timer_list polling_timer; static int polling; +#ifdef CONFIG_USB_OTG_UTILS +static struct otg_transceiver *transceiver; +#endif +static struct regulator *ac_draw; + enum { PDA_PSY_OFFLINE = 0, PDA_PSY_ONLINE = 1, @@ -104,18 +112,35 @@ static void update_status(void) static void update_charger(void) { - if (!pdata->set_charge) - return; - - if (new_ac_status > 0) { - dev_dbg(dev, "charger on (AC)\n"); - pdata->set_charge(PDA_POWER_CHARGE_AC); - } else if (new_usb_status > 0) { - dev_dbg(dev, "charger on (USB)\n"); - pdata->set_charge(PDA_POWER_CHARGE_USB); - } else { - dev_dbg(dev, "charger off\n"); - pdata->set_charge(0); + static int regulator_enabled; + int max_uA = pdata->ac_max_uA; + + if (pdata->set_charge) { + if (new_ac_status > 0) { + dev_dbg(dev, "charger on (AC)\n"); + pdata->set_charge(PDA_POWER_CHARGE_AC); + } else if (new_usb_status > 0) { + dev_dbg(dev, "charger on (USB)\n"); + pdata->set_charge(PDA_POWER_CHARGE_USB); + } else { + dev_dbg(dev, "charger off\n"); + pdata->set_charge(0); + } + } else if (ac_draw) { + if (new_ac_status > 0) { + regulator_set_current_limit(ac_draw, max_uA, max_uA); + if (!regulator_enabled) { + dev_dbg(dev, "charger on (AC)\n"); + regulator_enable(ac_draw); + regulator_enabled = 1; + } + } else { + if (regulator_enabled) { + dev_dbg(dev, "charger off\n"); + regulator_disable(ac_draw); + regulator_enabled = 0; + } + } } } @@ -194,6 +219,13 @@ static void polling_timer_func(unsigned long unused) jiffies + msecs_to_jiffies(pdata->polling_interval)); } +#ifdef CONFIG_USB_OTG_UTILS +static int otg_is_usb_online(void) +{ + return (transceiver->state == OTG_STATE_B_PERIPHERAL); +} +#endif + static int pda_power_probe(struct platform_device *pdev) { int ret = 0; @@ -227,6 +259,9 @@ static int pda_power_probe(struct platform_device *pdev) if (!pdata->polling_interval) pdata->polling_interval = 2000; + if (!pdata->ac_max_uA) + pdata->ac_max_uA = 500000; + setup_timer(&charger_timer, charger_timer_func, 0); setup_timer(&supply_timer, supply_timer_func, 0); @@ -240,6 +275,13 @@ static int pda_power_probe(struct platform_device *pdev) pda_psy_usb.num_supplicants = pdata->num_supplicants; } + ac_draw = regulator_get(dev, "ac_draw"); + if (IS_ERR(ac_draw)) { + dev_dbg(dev, "couldn't get ac_draw regulator\n"); + ac_draw = NULL; + ret = PTR_ERR(ac_draw); + } + if (pdata->is_ac_online) { ret = power_supply_register(&pdev->dev, &pda_psy_ac); if (ret) { @@ -261,6 +303,13 @@ static int pda_power_probe(struct platform_device *pdev) } } +#ifdef CONFIG_USB_OTG_UTILS + transceiver = otg_get_transceiver(); + if (transceiver && !pdata->is_usb_online) { + pdata->is_usb_online = otg_is_usb_online; + } +#endif + if (pdata->is_usb_online) { ret = power_supply_register(&pdev->dev, &pda_psy_usb); if (ret) { @@ -300,10 +349,18 @@ usb_irq_failed: usb_supply_failed: if (pdata->is_ac_online && ac_irq) free_irq(ac_irq->start, &pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif ac_irq_failed: if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); ac_supply_failed: + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); init_failed: @@ -327,6 +384,14 @@ static int pda_power_remove(struct platform_device *pdev) power_supply_unregister(&pda_psy_usb); if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index cb7d10f30763..d4cf7a2ceb3e 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -31,6 +31,8 @@ struct pda_power_pdata { unsigned int wait_for_status; /* msecs, default is 500 */ unsigned int wait_for_charger; /* msecs, default is 500 */ unsigned int polling_interval; /* msecs, default is 2000 */ + + unsigned long ac_max_uA; /* current to draw when on AC */ }; #endif /* __PDA_POWER_H__ */ -- cgit From 73969ff0eda233f140bcbed1251431387b43f383 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 23:27:14 -0800 Subject: Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov --- Documentation/input/rotary-encoder.txt | 101 +++++++++++++++ drivers/input/misc/Kconfig | 11 ++ drivers/input/misc/Makefile | 2 + drivers/input/misc/rotary_encoder.c | 221 +++++++++++++++++++++++++++++++++ include/linux/rotary_encoder.h | 13 ++ 5 files changed, 348 insertions(+) create mode 100644 Documentation/input/rotary-encoder.txt create mode 100644 drivers/input/misc/rotary_encoder.c create mode 100644 include/linux/rotary_encoder.h (limited to 'include/linux') diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt new file mode 100644 index 000000000000..435102a26d96 --- /dev/null +++ b/Documentation/input/rotary-encoder.txt @@ -0,0 +1,101 @@ +rotary-encoder - a generic driver for GPIO connected devices +Daniel Mack , Feb 2009 + +0. Function +----------- + +Rotary encoders are devices which are connected to the CPU or other +peripherals with two wires. The outputs are phase-shifted by 90 degrees +and by triggering on falling and rising edges, the turn direction can +be determined. + +The phase diagram of these two outputs look like this: + + _____ _____ _____ + | | | | | | + Channel A ____| |_____| |_____| |____ + + : : : : : : : : : : : : + __ _____ _____ _____ + | | | | | | | + Channel B |_____| |_____| |_____| |__ + + : : : : : : : : : : : : + Event a b c d a b c d a b c d + + |<-------->| + one step + + +For more information, please see + http://en.wikipedia.org/wiki/Rotary_encoder + + +1. Events / state machine +------------------------- + +a) Rising edge on channel A, channel B in low state + This state is used to recognize a clockwise turn + +b) Rising edge on channel B, channel A in high state + When entering this state, the encoder is put into 'armed' state, + meaning that there it has seen half the way of a one-step transition. + +c) Falling edge on channel A, channel B in high state + This state is used to recognize a counter-clockwise turn + +d) Falling edge on channel B, channel A in low state + Parking position. If the encoder enters this state, a full transition + should have happend, unless it flipped back on half the way. The + 'armed' state tells us about that. + +2. Platform requirements +------------------------ + +As there is no hardware dependent call in this driver, the platform it is +used with must support gpiolib. Another requirement is that IRQs must be +able to fire on both edges. + + +3. Board integration +-------------------- + +To use this driver in your system, register a platform_device with the +name 'rotary-encoder' and associate the IRQs and some specific platform +data with it. + +struct rotary_encoder_platform_data is declared in +include/linux/rotary-encoder.h and needs to be filled with the number of +steps the encoder has and can carry information about externally inverted +signals (because of used invertig buffer or other reasons). + +Because GPIO to IRQ mapping is platform specific, this information must +be given in seperately to the driver. See the example below. + +------------------ + +/* board support file example */ + +#include +#include + +#define GPIO_ROTARY_A 1 +#define GPIO_ROTARY_B 2 + +static struct rotary_encoder_platform_data my_rotary_encoder_info = { + .steps = 24, + .axis = ABS_X, + .gpio_a = GPIO_ROTARY_A, + .gpio_b = GPIO_ROTARY_B, + .inverted_a = 0, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &my_rotary_encoder_info, + } +}; + diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 67e5553f699a..806d2e66d249 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -227,4 +227,15 @@ config INPUT_PCF50633_PMU Say Y to include support for delivering PMU events via input layer on NXP PCF50633. +config INPUT_GPIO_ROTARY_ENCODER + tristate "Rotary encoders connected to GPIO pins" + depends on GPIOLIB && GENERIC_GPIO + help + Say Y here to add support for rotary encoders connected to GPIO lines. + Check file:Documentation/incput/rotary_encoder.txt for more + information. + + To compile this driver as a module, choose M here: the + module will be called rotary_encoder. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index bb62e6efacf3..e86cee66c914 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -22,3 +22,5 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o +obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o + diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c new file mode 100644 index 000000000000..5bb3ab51b8c6 --- /dev/null +++ b/drivers/input/misc/rotary_encoder.c @@ -0,0 +1,221 @@ +/* + * rotary_encoder.c + * + * (c) 2009 Daniel Mack + * + * state machine code inspired by code from Tim Ruetz + * + * A generic driver for rotary encoders connected to GPIO lines. + * See file:Documentation/input/rotary_encoder.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "rotary-encoder" + +struct rotary_encoder { + unsigned int irq_a; + unsigned int irq_b; + unsigned int pos; + unsigned int armed; + unsigned int dir; + struct input_dev *input; + struct rotary_encoder_platform_data *pdata; +}; + +static irqreturn_t rotary_encoder_irq(int irq, void *dev_id) +{ + struct rotary_encoder *encoder = dev_id; + struct rotary_encoder_platform_data *pdata = encoder->pdata; + int a = !!gpio_get_value(pdata->gpio_a); + int b = !!gpio_get_value(pdata->gpio_b); + int state; + + a ^= pdata->inverted_a; + b ^= pdata->inverted_b; + state = (a << 1) | b; + + switch (state) { + + case 0x0: + if (!encoder->armed) + break; + + if (encoder->dir) { + /* turning counter-clockwise */ + encoder->pos += pdata->steps; + encoder->pos--; + encoder->pos %= pdata->steps; + } else { + /* turning clockwise */ + encoder->pos++; + encoder->pos %= pdata->steps; + } + + input_report_abs(encoder->input, pdata->axis, encoder->pos); + input_sync(encoder->input); + + encoder->armed = 0; + break; + + case 0x1: + case 0x2: + if (encoder->armed) + encoder->dir = state - 1; + break; + + case 0x3: + encoder->armed = 1; + break; + } + + return IRQ_HANDLED; +} + +static int __devinit rotary_encoder_probe(struct platform_device *pdev) +{ + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + struct rotary_encoder *encoder; + struct input_dev *input; + int err; + + if (!pdata || !pdata->steps) { + dev_err(&pdev->dev, "invalid platform data\n"); + return -ENOENT; + } + + encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL); + input = input_allocate_device(); + if (!encoder || !input) { + dev_err(&pdev->dev, "failed to allocate memory for device\n"); + err = -ENOMEM; + goto exit_free_mem; + } + + encoder->input = input; + encoder->pdata = pdata; + encoder->irq_a = gpio_to_irq(pdata->gpio_a); + encoder->irq_b = gpio_to_irq(pdata->gpio_b); + + /* create and register the input driver */ + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + input->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(encoder->input, + pdata->axis, 0, pdata->steps, 0, 1); + + err = input_register_device(input); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto exit_free_mem; + } + + /* request the GPIOs */ + err = gpio_request(pdata->gpio_a, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_a); + goto exit_unregister_input; + } + + err = gpio_request(pdata->gpio_b, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_b); + goto exit_free_gpio_a; + } + + /* request the IRQs */ + err = request_irq(encoder->irq_a, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_a); + goto exit_free_gpio_b; + } + + err = request_irq(encoder->irq_b, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_b); + goto exit_free_irq_a; + } + + platform_set_drvdata(pdev, encoder); + + return 0; + +exit_free_irq_a: + free_irq(encoder->irq_a, encoder); +exit_free_gpio_b: + gpio_free(pdata->gpio_b); +exit_free_gpio_a: + gpio_free(pdata->gpio_a); +exit_unregister_input: + input_unregister_device(input); + input = NULL; /* so we don't try to free it */ +exit_free_mem: + input_free_device(input); + kfree(encoder); + return err; +} + +static int __devexit rotary_encoder_remove(struct platform_device *pdev) +{ + struct rotary_encoder *encoder = platform_get_drvdata(pdev); + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + + free_irq(encoder->irq_a, encoder); + free_irq(encoder->irq_b, encoder); + gpio_free(pdata->gpio_a); + gpio_free(pdata->gpio_b); + input_unregister_device(encoder->input); + platform_set_drvdata(pdev, NULL); + kfree(encoder); + + return 0; +} + +static struct platform_driver rotary_encoder_driver = { + .probe = rotary_encoder_probe, + .remove = __devexit_p(rotary_encoder_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init rotary_encoder_init(void) +{ + return platform_driver_register(&rotary_encoder_driver); +} + +static void __exit rotary_encoder_exit(void) +{ + platform_driver_unregister(&rotary_encoder_driver); +} + +module_init(rotary_encoder_init); +module_exit(rotary_encoder_exit); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_DESCRIPTION("GPIO rotary encoder driver"); +MODULE_AUTHOR("Daniel Mack "); +MODULE_LICENSE("GPL v2"); + diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h new file mode 100644 index 000000000000..12d63a30c347 --- /dev/null +++ b/include/linux/rotary_encoder.h @@ -0,0 +1,13 @@ +#ifndef __ROTARY_ENCODER_H__ +#define __ROTARY_ENCODER_H__ + +struct rotary_encoder_platform_data { + unsigned int steps; + unsigned int axis; + unsigned int gpio_a; + unsigned int gpio_b; + unsigned int inverted_a; + unsigned int inverted_b; +}; + +#endif /* __ROTARY_ENCODER_H__ */ -- cgit From b4be468cc1e65110d9144751bf7079dad6f142b7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Mar 2009 20:12:52 -0700 Subject: Input: add AD7879 Touchscreen driver [randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 32 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/ad7879.c | 782 +++++++++++++++++++++++++++++++++++++ include/linux/spi/ad7879.h | 35 ++ 4 files changed, 850 insertions(+) create mode 100644 drivers/input/touchscreen/ad7879.c create mode 100644 include/linux/spi/ad7879.h (limited to 'include/linux') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index afeb7554bfe2..b01fd61dadcc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -42,6 +42,38 @@ config TOUCHSCREEN_AD7877 To compile this driver as a module, choose M here: the module will be called ad7877. +config TOUCHSCREEN_AD7879_I2C + tristate "AD7879 based touchscreens: AD7879-1 I2C Interface" + depends on I2C + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879-1 controller, and your board-specific initialization + code includes that in its table of I2C devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879_SPI + tristate "AD7879 based touchscreens: AD7879 SPI Interface" + depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879 + tristate + default n + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 45dfcd61be11..6700f7b9d165 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -7,6 +7,7 @@ wm97xx-ts-y := wm97xx-core.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o +obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c new file mode 100644 index 000000000000..ea4c61d68683 --- /dev/null +++ b/drivers/input/touchscreen/ad7879.c @@ -0,0 +1,782 @@ +/* + * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface) + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * - ad7877.c + * Copyright (C) 2006-2008 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define AD7879_REG_ZEROS 0 +#define AD7879_REG_CTRL1 1 +#define AD7879_REG_CTRL2 2 +#define AD7879_REG_CTRL3 3 +#define AD7879_REG_AUX1HIGH 4 +#define AD7879_REG_AUX1LOW 5 +#define AD7879_REG_TEMP1HIGH 6 +#define AD7879_REG_TEMP1LOW 7 +#define AD7879_REG_XPLUS 8 +#define AD7879_REG_YPLUS 9 +#define AD7879_REG_Z1 10 +#define AD7879_REG_Z2 11 +#define AD7879_REG_AUXVBAT 12 +#define AD7879_REG_TEMP 13 +#define AD7879_REG_REVID 14 + +/* Control REG 1 */ +#define AD7879_TMR(x) ((x & 0xFF) << 0) +#define AD7879_ACQ(x) ((x & 0x3) << 8) +#define AD7879_MODE_NOC (0 << 10) /* Do not convert */ +#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */ +#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */ +#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */ +#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */ + +/* Control REG 2 */ +#define AD7879_FCD(x) ((x & 0x3) << 0) +#define AD7879_RESET (1 << 4) +#define AD7879_MFS(x) ((x & 0x3) << 5) +#define AD7879_AVG(x) ((x & 0x3) << 7) +#define AD7879_SER (1 << 9) /* non-differential */ +#define AD7879_DFR (0 << 9) /* differential */ +#define AD7879_GPIOPOL (1 << 10) +#define AD7879_GPIODIR (1 << 11) +#define AD7879_GPIO_DATA (1 << 12) +#define AD7879_GPIO_EN (1 << 13) +#define AD7879_PM(x) ((x & 0x3) << 14) +#define AD7879_PM_SHUTDOWN (0) +#define AD7879_PM_DYN (1) +#define AD7879_PM_FULLON (2) + +/* Control REG 3 */ +#define AD7879_TEMPMASK_BIT (1<<15) +#define AD7879_AUXVBATMASK_BIT (1<<14) +#define AD7879_INTMODE_BIT (1<<13) +#define AD7879_GPIOALERTMASK_BIT (1<<12) +#define AD7879_AUXLOW_BIT (1<<11) +#define AD7879_AUXHIGH_BIT (1<<10) +#define AD7879_TEMPLOW_BIT (1<<9) +#define AD7879_TEMPHIGH_BIT (1<<8) +#define AD7879_YPLUS_BIT (1<<7) +#define AD7879_XPLUS_BIT (1<<6) +#define AD7879_Z1_BIT (1<<5) +#define AD7879_Z2_BIT (1<<4) +#define AD7879_AUX_BIT (1<<3) +#define AD7879_VBAT_BIT (1<<2) +#define AD7879_TEMP_BIT (1<<1) + +enum { + AD7879_SEQ_XPOS = 0, + AD7879_SEQ_YPOS = 1, + AD7879_SEQ_Z1 = 2, + AD7879_SEQ_Z2 = 3, + AD7879_NR_SENSE = 4, +}; + +#define MAX_12BIT ((1<<12)-1) +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define AD7879_DEVID 0x7A +typedef struct spi_device bus_device; +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#define AD7879_DEVID 0x79 +typedef struct i2c_client bus_device; +#endif + +struct ad7879 { + bus_device *bus; + struct input_dev *input; + struct work_struct work; + struct timer_list timer; + + struct mutex mutex; + unsigned disabled:1; /* P: mutex */ + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + struct spi_message msg; + struct spi_transfer xfer[AD7879_NR_SENSE + 1]; + u16 cmd; +#endif + u16 conversion_data[AD7879_NR_SENSE]; + char phys[32]; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + u8 median; + u16 x_plate_ohms; + u16 pressure_max; + u16 gpio_init; + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_crtl3; + unsigned gpio:1; +}; + +static int ad7879_read(bus_device *, u8); +static int ad7879_write(bus_device *, u8, u16); +static void ad7879_collect(struct ad7879 *); + +static void ad7879_report(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7879. + * The preprocessing function consists of a median and an averaging filter. + * The combination of these two techniques provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + } +} + +static void ad7879_work(struct work_struct *work) +{ + struct ad7879 *ts = container_of(work, struct ad7879, work); + + /* use keventd context to read the result registers */ + ad7879_collect(ts); + ad7879_report(ts); + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); +} + +static void ad7879_ts_event_release(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); +} + +static void ad7879_timer(unsigned long handle) +{ + struct ad7879 *ts = (void *)handle; + + ad7879_ts_event_release(ts); +} + +static irqreturn_t ad7879_irq(int irq, void *handle) +{ + struct ad7879 *ts = handle; + + /* The repeated conversion sequencer controlled by TMR kicked off too fast. + * We ignore the last and process the sample sequence currently in the queue. + * It can't be older than 9.4ms + */ + + if (!work_pending(&ts->work)) + schedule_work(&ts->work); + + return IRQ_HANDLED; +} + +static void ad7879_setup(struct ad7879 *ts) +{ + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay) | + ts->gpio_init; + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); +} + +static void ad7879_disable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + + ts->disabled = 1; + disable_irq(ts->bus->irq); + + cancel_work_sync(&ts->work); + + if (del_timer_sync(&ts->timer)) + ad7879_ts_event_release(ts); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, + AD7879_PM(AD7879_PM_SHUTDOWN)); + } + + mutex_unlock(&ts->mutex); +} + +static void ad7879_enable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ad7879_setup(ts); + ts->disabled = 0; + enable_irq(ts->bus->irq); + } + + mutex_unlock(&ts->mutex); +} + +static ssize_t ad7879_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7879_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + if (val) + ad7879_disable(ts); + else + ad7879_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); + +static ssize_t ad7879_gpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio); +} + +static ssize_t ad7879_gpio_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio = !!val; + error = ad7879_write(ts->bus, AD7879_REG_CTRL2, + ts->gpio ? + ts->cmd_crtl2 & ~AD7879_GPIO_DATA : + ts->cmd_crtl2 | AD7879_GPIO_DATA); + mutex_unlock(&ts->mutex); + + return error ? : count; +} + +static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); + +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + &dev_attr_gpio.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) +{ + struct input_dev *input_dev; + struct ad7879_platform_data *pdata = bus->dev.platform_data; + int err; + u16 revid; + + if (!bus->irq) { + dev_err(&bus->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_err(&bus->dev, "no platform data?\n"); + return -ENODEV; + } + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + ts->input = input_dev; + + setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); + INIT_WORK(&ts->work, ad7879_work); + mutex_init(&ts->mutex); + + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + ts->median = pdata->median; + + if (pdata->gpio_output) + ts->gpio_init = AD7879_GPIO_EN | + (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); + else + ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); + + input_dev->name = "AD7879 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &bus->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET); + + if (err < 0) { + dev_err(&bus->dev, "Failed to write %s\n", input_dev->name); + goto err_free_mem; + } + + revid = ad7879_read(bus, AD7879_REG_REVID); + + if ((revid & 0xFF) != AD7879_DEVID) { + dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + ad7879_setup(ts); + + err = request_irq(bus->irq, ad7879_irq, + IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM, + bus->dev.driver->name, ts); + + if (err) { + dev_err(&bus->dev, "irq %d busy?\n", bus->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group); + if (err) + goto err_free_irq; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr; + + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", + revid >> 8, bus->irq); + + return 0; + +err_remove_attr: + sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); +err_free_irq: + free_irq(bus->irq, ts); +err_free_mem: + input_free_device(input_dev); + + return err; +} + +static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) +{ + ad7879_disable(ts); + sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); + free_irq(ts->bus->irq, ts); + input_unregister_device(ts->input); + dev_dbg(&bus->dev, "unregistered touchscreen\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int ad7879_suspend(bus_device *bus, pm_message_t message) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_disable(ts); + + return 0; +} + +static int ad7879_resume(bus_device *bus) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_enable(ts); + + return 0; +} +#else +#define ad7879_suspend NULL +#define ad7879_resume NULL +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF)) +#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF)) + +struct ser_req { + u16 command; + u16 data; + struct spi_message msg; + struct spi_transfer xfer[2]; +}; + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_read(struct spi_device *spi, u8 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_READCMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->xfer[1].rx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->data; + + kfree(req); + + return ret; +} + +static int ad7879_write(struct spi_device *spi, u8 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_WRITECMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->data = val; + req->xfer[1].tx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int status = spi_sync(ts->bus, &ts->msg); + + if (status) + dev_err(&ts->bus->dev, "spi_sync --> %d\n", status); +} + +static void ad7879_setup_ts_def_msg(struct ad7879 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS); + + m = &ts->msg; + spi_message_init(m); + ts->xfer[0].tx_buf = &ts->cmd; + ts->xfer[0].len = 2; + + spi_message_add_tail(&ts->xfer[0], m); + + for (i = 0; i < AD7879_NR_SENSE; i++) { + ts->xfer[i + 1].rx_buf = &ts->conversion_data[i]; + ts->xfer[i + 1].len = 2; + spi_message_add_tail(&ts->xfer[i + 1], m); + } +} + +static int __devinit ad7879_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + int error; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ts); + ts->bus = spi; + + ad7879_setup_ts_def_msg(ts); + + error = ad7879_construct(spi, ts); + if (error) { + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct spi_device *spi) +{ + struct ad7879 *ts = dev_get_drvdata(&spi->dev); + + ad7879_destroy(spi, ts); + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + + return 0; +} + +static struct spi_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, +}; + +static int __init ad7879_init(void) +{ + return spi_register_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + spi_unregister_driver(&ad7879_driver); +} +module_exit(ad7879_exit); + +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_read(struct i2c_client *client, u8 reg) +{ + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int ad7879_write(struct i2c_client *client, u8 reg, u16 val) +{ + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int i; + + for (i = 0; i < AD7879_NR_SENSE; i++) + ts->conversion_data[i] = ad7879_read(ts->bus, + AD7879_REG_XPLUS + i); +} + +static int __devinit ad7879_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + i2c_set_clientdata(client, ts); + ts->bus = client; + + error = ad7879_construct(client, ts); + if (error) { + i2c_set_clientdata(client, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct i2c_client *client) +{ + struct ad7879 *ts = dev_get_drvdata(&client->dev); + + ad7879_destroy(client, ts); + i2c_set_clientdata(client, NULL); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, + .id_table = ad7879_id, +}; + +static int __init ad7879_init(void) +{ + return i2c_add_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + i2c_del_driver(&ad7879_driver); +} +module_exit(ad7879_exit); +#endif + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h new file mode 100644 index 000000000000..4231104c9afa --- /dev/null +++ b/include/linux/spi/ad7879.h @@ -0,0 +1,35 @@ +/* linux/spi/ad7879.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7879_platform_data { + u16 model; /* 7879 */ + u16 x_plate_ohms; + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + /* [0..255] 0=OFF Starts at 1=550us and goes + * all the way to 9.440ms in steps of 35us. + */ + u8 pen_down_acc_interval; + /* [0..15] Starts at 0=128us and goes all the + * way to 4.096ms in steps of 128us. + */ + u8 first_conversion_delay; + /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 acquisition_time; + /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */ + u8 averaging; + /* [0..3] Perform X measurements 0 = OFF, + * 1 = 4, 2 = 8, 3 = 16 (median > averaging) + */ + u8 median; + /* 1 = AUX/VBAT/GPIO set to GPIO Output */ + u8 gpio_output; + /* Initial GPIO pin state (valid if gpio_output = 1) */ + u8 gpio_default; +}; -- cgit From 9756b15e1b58453a6fd54b85c1ad8515209e10bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Mar 2009 20:37:20 -0700 Subject: irq: fix cpumask memory leak on offstack cpumask kernels Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu Acked-by: Rusty Russell LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar --- include/linux/irq.h | 14 ++++++++++++++ kernel/irq/numa_migrate.c | 1 + 2 files changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 974890b3c52f..99d147efe399 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -482,6 +482,16 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, #endif } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ + free_cpumask_var(old_desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + free_cpumask_var(old_desc->pending_mask); +#endif +} + #else /* !CONFIG_SMP */ static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, @@ -495,6 +505,10 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, { } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +} #endif /* CONFIG_SMP */ #endif /* _LINUX_IRQ_H */ diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c index 243d6121e50e..44bbdcbaf8d2 100644 --- a/kernel/irq/numa_migrate.c +++ b/kernel/irq/numa_migrate.c @@ -54,6 +54,7 @@ static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc, static void free_one_irq_desc(struct irq_desc *old_desc, struct irq_desc *desc) { free_kstat_irqs(old_desc, desc); + free_desc_masks(old_desc, desc); arch_free_chip_data(old_desc, desc); } -- cgit From 8d82ffd15e59febf2c597067a777526958b7f769 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 7 Apr 2009 10:20:56 +0200 Subject: powerpc: Document new FSL I2C bindings and cleanup This patch documents the new bindings for the MPC I2C bus driver. Furthermore, it removes obsolete FSL device related definitions for I2C. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala --- Documentation/powerpc/dts-bindings/fsl/i2c.txt | 46 +++++++++++++++++--------- include/linux/fsl_devices.h | 4 --- 2 files changed, 31 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index d0ab33e21fe6..b6d2e21474f9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -7,8 +7,10 @@ Required properties : Recommended properties : - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. + - compatible : compatibility list with 2 entries, the first should + be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor, + e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one + should be "fsl-i2c". - interrupts : where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -16,17 +18,31 @@ Recommended properties : controller you have. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - -Example : - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; + - fsl,preserve-clocking : boolean; if defined, the clock settings + from the bootloader are preserved (not touched). + - clock-frequency : desired I2C bus clock frequency in Hz. + +Examples : + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + }; + diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5e8b55..43fc95d822d5 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -43,10 +43,6 @@ * */ -/* Flags related to I2C device features */ -#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 -#define FSL_I2C_DEV_CLOCK_5200 0x00000002 - enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, -- cgit From f876d346e3807647b1de411de6a86c44821896ca Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 8 Apr 2009 14:05:43 +0900 Subject: tracing: append a comma to INIT_FTRACE_GRAPH Impact: dont break future extensions of INIT_TASK While not a problem right now, due to lack of a comma, build fails if elements are appended to INIT_TASK() macro in development code: arch/x86/kernel/init_task.c:33: error: request for member `XXXXXXXXXX' in something not a structure or union arch/x86/kernel/init_task.c:33: error: initializer element is not constant arch/x86/kernel/init_task.c:33: error: (near initialization for `init_task.ret_stack') make[1]: *** [arch/x86/kernel/init_task.o] Error 1 make: *** [arch/x86/kernel] Error 2 Signed-off-by: Tetsuo Handa Cc: srostedt@redhat.com LKML-Reference: <200904080505.n3855hcn017109@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index da5405dce347..ff112a872d75 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -357,7 +357,7 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* for init task */ -#define INIT_FTRACE_GRAPH .ret_stack = NULL +#define INIT_FTRACE_GRAPH .ret_stack = NULL, /* * Stack of return addresses for functions -- cgit From 60f85019c6c8c1aebf3485a313e0da094bc95d07 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:01 +0200 Subject: ide: replace IDE_TFLAG_* flags by IDE_VALID_* Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 3 +- drivers/ide/ide-atapi.c | 21 +++++----- drivers/ide/ide-disk.c | 40 ++++++++++++------- drivers/ide/ide-disk_proc.c | 6 ++- drivers/ide/ide-io-std.c | 50 +++++++++++++----------- drivers/ide/ide-io.c | 5 ++- drivers/ide/ide-ioctls.c | 10 +++-- drivers/ide/ide-iops.c | 4 +- drivers/ide/ide-lib.c | 11 +++--- drivers/ide/ide-park.c | 3 +- drivers/ide/ide-pm.c | 3 +- drivers/ide/ide-probe.c | 4 +- drivers/ide/ide-proc.c | 4 +- drivers/ide/ide-taskfile.c | 36 +++++++++-------- drivers/ide/ns87415.c | 25 ++++++------ drivers/ide/scc_pata.c | 50 +++++++++++++----------- drivers/ide/tx4939ide.c | 2 +- include/linux/ide.h | 95 ++++++++++++++++++--------------------------- 18 files changed, 197 insertions(+), 175 deletions(-) (limited to 'include/linux') diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 12f436951bff..f0db4d349c60 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -319,7 +319,8 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, /* convert GTF to taskfile */ memset(&cmd, 0, sizeof(cmd)); memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF); - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; err = ide_no_data_taskfile(drive, &cmd); if (err) { diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3e43b889dd64..a359323d8ffe 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -257,8 +257,7 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_NSECT; + cmd.valid.in.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | IDE_VALID_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -439,12 +438,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_started; } -static void ide_init_packet_cmd(struct ide_cmd *cmd, u32 tf_flags, +static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, u16 bcount, u8 dma) { - cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; - cmd->tf_flags |= IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_FEATURE | tf_flags; + cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; + cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | + IDE_VALID_FEATURE | valid_tf; cmd->tf.command = ATA_CMD_PACKET; cmd->tf.feature = dma; /* Use PIO/DMA */ cmd->tf.lbam = bcount & 0xff; @@ -456,7 +455,7 @@ static u8 ide_read_ireason(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -588,12 +587,12 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) ide_expiry_t *expiry = NULL; struct request *rq = hwif->rq; unsigned int timeout; - u32 tf_flags; u16 bcount; + u8 valid_tf; u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT); if (dev_is_idecd(drive)) { - tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; + valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL; bcount = ide_cd_get_xferlen(rq); expiry = ide_cd_expiry; timeout = ATAPI_WAIT_PC; @@ -607,7 +606,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) pc->xferred = 0; pc->cur_pos = pc->buf; - tf_flags = IDE_TFLAG_OUT_DEVICE; + valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? pc->req_xfer : min(pc->req_xfer, 63 * 1024)); @@ -627,7 +626,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) : WAIT_TAPE_CMD; } - ide_init_packet_cmd(cmd, tf_flags, bcount, drive->dma); + ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma); (void)do_rw_taskfile(drive, cmd); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c998cf8e971a..235263e51dd9 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -97,7 +97,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, } memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; if (drive->dev_flags & IDE_DFLAG_LBA) { if (lba48) { @@ -116,7 +117,9 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags |= IDE_TFLAG_LBA48; } else { tf->nsect = nsectors & 0xff; tf->lbal = block; @@ -220,9 +223,13 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) tf->command = ATA_CMD_READ_NATIVE_MAX; tf->device = ATA_LBA; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } ide_no_data_taskfile(drive, &cmd); @@ -260,9 +267,13 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) } tf->device |= ATA_LBA; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } ide_no_data_taskfile(drive, &cmd); @@ -395,8 +406,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->tf.command = ATA_CMD_FLUSH_EXT; else cmd->tf.command = ATA_CMD_FLUSH; - cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_DYN; + cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd->tf_flags = IDE_TFLAG_DYN; cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; @@ -457,7 +468,8 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) cmd.tf.feature = feature; cmd.tf.nsect = nsect; cmd.tf.command = ATA_CMD_SET_FEATURES; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -533,7 +545,8 @@ static int do_idedisk_flushcache(ide_drive_t *drive) cmd.tf.command = ATA_CMD_FLUSH_EXT; else cmd.tf.command = ATA_CMD_FLUSH; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -715,7 +728,8 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, memset(&cmd, 0, sizeof(cmd)); cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; ret = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index eaea3bef2073..19f263bf0a9e 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -13,7 +13,8 @@ static int smart_enable(ide_drive_t *drive) tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -29,7 +30,8 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd.protocol = ATA_PROT_PIO; return ide_raw_taskfile(drive, &cmd, buf, 1); diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 9cac281d82c4..8b0b2e9ccf5b 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -91,6 +91,7 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) struct ide_io_ports *io_ports = &hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; void (*tf_outb)(u8 addr, unsigned long port); + u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; @@ -102,29 +103,31 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) HIHI = 0xFF; - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + if (valid & IDE_VALID_FEATURE) tf_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf_outb(tf->hob_lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) + valid = cmd->valid.out.tf; + + if (valid & IDE_VALID_FEATURE) tf_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) + if (valid & IDE_VALID_NSECT) tf_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) + if (valid & IDE_VALID_LBAL) tf_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) + if (valid & IDE_VALID_LBAM) tf_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) + if (valid & IDE_VALID_LBAH) tf_outb(tf->lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (valid & IDE_VALID_DEVICE) tf_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } @@ -137,6 +140,7 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) struct ide_taskfile *tf = &cmd->tf; void (*tf_outb)(u8 addr, unsigned long port); u8 (*tf_inb)(unsigned long port); + u8 valid = cmd->valid.in.tf; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) { @@ -150,31 +154,33 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) /* be sure we're looking at the low order bits */ tf_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = tf_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = tf_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = tf_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = tf_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = tf_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = tf_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = tf_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = tf_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = tf_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = tf_inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1deb6d29b186..99bb0a9a67e8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -205,8 +205,9 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE | - IDE_TFLAG_CUSTOM_HANDLER; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.tf_flags = IDE_TFLAG_CUSTOM_HANDLER; do_rw_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 770142767437..b11df4b7998e 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -141,11 +141,12 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) tf->lbal = args[1]; tf->lbam = 0x4f; tf->lbah = 0xc2; - cmd.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_OUT_TF; + cmd.valid.in.tf = IDE_VALID_NSECT; } else { tf->nsect = args[1]; - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; } tf->command = args[0]; cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA; @@ -207,7 +208,8 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) memset(&cmd, 0, sizeof(cmd)); memcpy(&cmd.tf_array[7], &args[1], 6); cmd.tf.command = args[0]; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; err = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 27bb70ddd459..0fdf0dfb5743 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -40,7 +40,7 @@ u8 ide_read_error(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_ERROR; + cmd.valid.in.tf = IDE_VALID_ERROR; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -348,7 +348,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; cmd.tf.feature = SETFEATURES_XFER; cmd.tf.nsect = speed; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 217b7fdf2b17..c9ef77c5d62e 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -71,11 +71,12 @@ static void ide_dump_sector(ide_drive_t *drive) u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); memset(&cmd, 0, sizeof(cmd)); - if (lba48) - cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA | - IDE_TFLAG_LBA48; - else - cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE; + if (lba48) { + cmd.valid.in.tf = IDE_VALID_LBA; + cmd.valid.in.hob = IDE_VALID_LBA; + cmd.tf_flags = IDE_TFLAG_LBA48; + } else + cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; drive->hwif->tp_ops->tf_read(drive, &cmd); diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 9490b446519f..310d03f2b5b7 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -74,7 +74,8 @@ ide_startstop_t ide_do_park_unpark(ide_drive_t *drive, struct request *rq) tf->lbal = 0x4c; tf->lbam = 0x4e; tf->lbah = 0x55; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; } else /* cmd == REQ_UNPARK_HEADS */ tf->command = ATA_CMD_CHK_POWER; diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index bb7858ebb7d1..0d8a151c0a01 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -163,7 +163,8 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd->protocol = ATA_PROT_NODATA; return do_rw_taskfile(drive, cmd); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c1ef8c8c785e..6a98d7c1681a 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -287,7 +287,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) memset(&cmd, 0, sizeof(cmd)); /* disable DMA & overlap */ - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE; + cmd.valid.out.tf = IDE_VALID_FEATURE; tp_ops->tf_load(drive, &cmd); } @@ -340,7 +340,7 @@ static u8 ide_read_device(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE; drive->hwif->tp_ops->tf_read(drive, &cmd); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 10a88bf3eefa..3242698832a4 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -204,8 +204,8 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) cmd.tf.command = ATA_CMD_SET_FEATURES; cmd.tf.feature = SETFEATURES_XFER; cmd.tf.nsect = (u8)arg; - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; err = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 243421ce40d0..dc84f8bde52a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -47,7 +47,8 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) cmd.tf.command = ATA_CMD_ID_ATA; else cmd.tf.command = ATA_CMD_ID_ATAPI; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd.protocol = ATA_PROT_PIO; return ide_raw_taskfile(drive, &cmd, buf, 1); @@ -494,11 +495,14 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) memcpy(&cmd.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | - IDE_TFLAG_IN_TF; + cmd.valid.out.tf = IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; + cmd.tf_flags = IDE_TFLAG_IO_16BIT; - if (drive->dev_flags & IDE_DFLAG_LBA48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); + if (drive->dev_flags & IDE_DFLAG_LBA48) { + cmd.tf_flags |= IDE_TFLAG_LBA48; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + } if (req_task->out_flags.all) { cmd.ftf_flags |= IDE_FTFLAG_FLAGGED; @@ -507,28 +511,28 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA; if (req_task->out_flags.b.nsector_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; + cmd.valid.out.hob |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; + cmd.valid.out.hob |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; + cmd.valid.out.hob |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; + cmd.valid.out.hob |= IDE_VALID_LBAH; if (req_task->out_flags.b.error_feature) - cmd.tf_flags |= IDE_TFLAG_OUT_FEATURE; + cmd.valid.out.tf |= IDE_VALID_FEATURE; if (req_task->out_flags.b.nsector) - cmd.tf_flags |= IDE_TFLAG_OUT_NSECT; + cmd.valid.out.tf |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAL; + cmd.valid.out.tf |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAM; + cmd.valid.out.tf |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAH; + cmd.valid.out.tf |= IDE_VALID_LBAH; } else { - cmd.tf_flags |= IDE_TFLAG_OUT_TF; + cmd.valid.out.tf |= IDE_VALID_OUT_TF; if (cmd.tf_flags & IDE_TFLAG_LBA48) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB; + cmd.valid.out.hob |= IDE_VALID_OUT_HOB; } if (req_task->in_flags.b.data) diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 71a39fb3856f..0208dd35c1a3 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -65,35 +65,38 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = superio_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 55e48db7d1be..38a715e293d4 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -649,34 +649,37 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.out.hob; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) HIHI = 0xFF; - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + if (valid & IDE_VALID_NSECT) scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + if (valid & IDE_VALID_LBAL) scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + if (valid & IDE_VALID_LBAM) scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) + valid = cmd->valid.out.tf; + + if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) + if (valid & IDE_VALID_NSECT) scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) + if (valid & IDE_VALID_LBAL) scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) + if (valid & IDE_VALID_LBAM) scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) + if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (valid & IDE_VALID_DEVICE) scc_ide_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } @@ -685,35 +688,38 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ scc_ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = scc_ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = scc_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = scc_ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index bee9461f13b3..af8b0f68d5cf 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -438,7 +438,7 @@ static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { ide_tf_load(drive, cmd); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (cmd->valid.out.tf & IDE_VALID_DEVICE) tx4939ide_tf_load_fixup(drive); } diff --git a/include/linux/ide.h b/include/linux/ide.h index a5d26f66ef78..58951f5540bf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -239,66 +239,39 @@ typedef enum { ide_started, /* a drive operation was started, handler was set */ } ide_startstop_t; +enum { + IDE_VALID_ERROR = (1 << 1), + IDE_VALID_FEATURE = IDE_VALID_ERROR, + IDE_VALID_NSECT = (1 << 2), + IDE_VALID_LBAL = (1 << 3), + IDE_VALID_LBAM = (1 << 4), + IDE_VALID_LBAH = (1 << 5), + IDE_VALID_DEVICE = (1 << 6), + IDE_VALID_LBA = IDE_VALID_LBAL | + IDE_VALID_LBAM | + IDE_VALID_LBAH, + IDE_VALID_OUT_TF = IDE_VALID_FEATURE | + IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_IN_TF = IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF, + IDE_VALID_IN_HOB = IDE_VALID_ERROR | + IDE_VALID_NSECT | + IDE_VALID_LBA, +}; + enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_OUT_HOB_FEATURE = (1 << 1), - IDE_TFLAG_OUT_HOB_NSECT = (1 << 2), - IDE_TFLAG_OUT_HOB_LBAL = (1 << 3), - IDE_TFLAG_OUT_HOB_LBAM = (1 << 4), - IDE_TFLAG_OUT_HOB_LBAH = (1 << 5), - IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | - IDE_TFLAG_OUT_HOB_NSECT | - IDE_TFLAG_OUT_HOB_LBAL | - IDE_TFLAG_OUT_HOB_LBAM | - IDE_TFLAG_OUT_HOB_LBAH, - IDE_TFLAG_OUT_FEATURE = (1 << 6), - IDE_TFLAG_OUT_NSECT = (1 << 7), - IDE_TFLAG_OUT_LBAL = (1 << 8), - IDE_TFLAG_OUT_LBAM = (1 << 9), - IDE_TFLAG_OUT_LBAH = (1 << 10), - IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_LBAH, - IDE_TFLAG_OUT_DEVICE = (1 << 11), - IDE_TFLAG_WRITE = (1 << 12), - IDE_TFLAG_CUSTOM_HANDLER = (1 << 13), - IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14), - IDE_TFLAG_IN_HOB_ERROR = (1 << 15), - IDE_TFLAG_IN_HOB_NSECT = (1 << 16), - IDE_TFLAG_IN_HOB_LBAL = (1 << 17), - IDE_TFLAG_IN_HOB_LBAM = (1 << 18), - IDE_TFLAG_IN_HOB_LBAH = (1 << 19), - IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | - IDE_TFLAG_IN_HOB_LBAM | - IDE_TFLAG_IN_HOB_LBAH, - IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR | - IDE_TFLAG_IN_HOB_NSECT | - IDE_TFLAG_IN_HOB_LBA, - IDE_TFLAG_IN_ERROR = (1 << 20), - IDE_TFLAG_IN_NSECT = (1 << 21), - IDE_TFLAG_IN_LBAL = (1 << 22), - IDE_TFLAG_IN_LBAM = (1 << 23), - IDE_TFLAG_IN_LBAH = (1 << 24), - IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | - IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_LBAH, - IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | - IDE_TFLAG_IN_LBA, - IDE_TFLAG_IN_DEVICE = (1 << 25), - IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | - IDE_TFLAG_IN_HOB, - IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | - IDE_TFLAG_IN_TF, - IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_IN_DEVICE, + IDE_TFLAG_WRITE = (1 << 1), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 2), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3), /* force 16-bit I/O operations */ - IDE_TFLAG_IO_16BIT = (1 << 26), + IDE_TFLAG_IO_16BIT = (1 << 4), /* struct ide_cmd was allocated using kmalloc() */ - IDE_TFLAG_DYN = (1 << 27), - IDE_TFLAG_FS = (1 << 28), - IDE_TFLAG_MULTI_PIO = (1 << 29), + IDE_TFLAG_DYN = (1 << 5), + IDE_TFLAG_FS = (1 << 6), + IDE_TFLAG_MULTI_PIO = (1 << 7), }; enum { @@ -346,8 +319,16 @@ struct ide_cmd { struct ide_taskfile tf; u8 tf_array[14]; }; + + struct { + struct { + u8 tf; + u8 hob; + } out, in; + } valid; + + u8 tf_flags; u8 ftf_flags; /* for TASKFILE ioctl */ - u32 tf_flags; int protocol; int sg_nents; /* number of sg entries */ -- cgit From 745483f10c6cefb303007c6873e2bfce54efa8ed Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: simplify 'struct ide_taskfile' Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 2 +- drivers/ide/ide-disk.c | 30 ++++++++++++++-------------- drivers/ide/ide-io-std.c | 24 ++++++++++++----------- drivers/ide/ide-io.c | 6 +++--- drivers/ide/ide-ioctls.c | 4 ++-- drivers/ide/ide-lib.c | 15 +++++++------- drivers/ide/ide-taskfile.c | 31 ++++++++++++----------------- drivers/ide/ns87415.c | 11 ++++++----- drivers/ide/scc_pata.c | 24 ++++++++++++----------- include/linux/ide.h | 49 ++++++++++++++-------------------------------- 10 files changed, 89 insertions(+), 107 deletions(-) (limited to 'include/linux') diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index f0db4d349c60..77f79d26b264 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -318,7 +318,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, /* convert GTF to taskfile */ memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF); + memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF); cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 235263e51dd9..a9fbe2c31210 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -105,17 +105,19 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); - tf->hob_nsect = (nsectors >> 8) & 0xff; - tf->hob_lbal = (u8)(block >> 24); - if (sizeof(block) != 4) { - tf->hob_lbam = (u8)((u64)block >> 32); - tf->hob_lbah = (u8)((u64)block >> 40); - } - tf->nsect = nsectors & 0xff; tf->lbal = (u8) block; tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); + tf->device = ATA_LBA; + + tf = &cmd.hob; + tf->nsect = (nsectors >> 8) & 0xff; + tf->lbal = (u8)(block >> 24); + if (sizeof(block) != 4) { + tf->lbam = (u8)((u64)block >> 32); + tf->lbah = (u8)((u64)block >> 40); + } cmd.valid.out.hob = IDE_VALID_OUT_HOB; cmd.valid.in.hob = IDE_VALID_IN_HOB; @@ -125,10 +127,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbal = block; tf->lbam = block >>= 8; tf->lbah = block >>= 8; - tf->device = (block >> 8) & 0xf; + tf->device = ((block >> 8) & 0xf) | ATA_LBA; } - - tf->device |= ATA_LBA; } else { unsigned int sect, head, cyl, track; @@ -235,7 +235,7 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) /* if OK, compute maximum address value */ if (!(tf->status & ATA_ERR)) - addr = ide_get_lba_addr(tf, lba48) + 1; + addr = ide_get_lba_addr(&cmd, lba48) + 1; return addr; } @@ -257,9 +257,9 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->lbam = (addr_req >>= 8) & 0xff; tf->lbah = (addr_req >>= 8) & 0xff; if (lba48) { - tf->hob_lbal = (addr_req >>= 8) & 0xff; - tf->hob_lbam = (addr_req >>= 8) & 0xff; - tf->hob_lbah = (addr_req >>= 8) & 0xff; + cmd.hob.lbal = (addr_req >>= 8) & 0xff; + cmd.hob.lbam = (addr_req >>= 8) & 0xff; + cmd.hob.lbah = (addr_req >>= 8) & 0xff; tf->command = ATA_CMD_SET_MAX_EXT; } else { tf->device = (addr_req >>= 8) & 0x0f; @@ -279,7 +279,7 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) /* if OK, compute maximum address value */ if (!(tf->status & ATA_ERR)) - addr_set = ide_get_lba_addr(tf, lba48) + 1; + addr_set = ide_get_lba_addr(&cmd, lba48) + 1; return addr_set; } diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 8b0b2e9ccf5b..45a424b60c85 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -89,7 +89,7 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; + struct ide_taskfile *tf = &cmd->hob; void (*tf_outb)(u8 addr, unsigned long port); u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; @@ -104,16 +104,17 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) HIHI = 0xFF; if (valid & IDE_VALID_FEATURE) - tf_outb(tf->hob_feature, io_ports->feature_addr); + tf_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf_outb(tf->hob_nsect, io_ports->nsect_addr); + tf_outb(tf->nsect, io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf_outb(tf->hob_lbal, io_ports->lbal_addr); + tf_outb(tf->lbal, io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf_outb(tf->hob_lbam, io_ports->lbam_addr); + tf_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf_outb(tf->hob_lbah, io_ports->lbah_addr); + tf_outb(tf->lbah, io_ports->lbah_addr); + tf = &cmd->tf; valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) @@ -170,18 +171,19 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = tf_inb(io_ports->feature_addr); + tf->error = tf_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = tf_inb(io_ports->nsect_addr); + tf->nsect = tf_inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = tf_inb(io_ports->lbal_addr); + tf->lbal = tf_inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = tf_inb(io_ports->lbam_addr); + tf->lbam = tf_inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = tf_inb(io_ports->lbah_addr); + tf->lbah = tf_inb(io_ports->lbah_addr); } } EXPORT_SYMBOL_GPL(ide_tf_read); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 99bb0a9a67e8..e71c72be7622 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -86,8 +86,8 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) tp_ops->input_data(drive, cmd, data, 2); - tf->data = data[0]; - tf->hob_data = data[1]; + cmd->tf.data = data[0]; + cmd->hob.data = data[1]; } tp_ops->tf_read(drive, cmd); @@ -97,7 +97,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) if (tf->lbal != 0xc4) { printk(KERN_ERR "%s: head unload failed!\n", drive->name); - ide_tf_dump(drive->name, tf); + ide_tf_dump(drive->name, cmd); } else drive->dev_flags |= IDE_DFLAG_PARKED; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index b11df4b7998e..c1c25ebbaa1f 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -206,7 +206,7 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) return -EFAULT; memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[7], &args[1], 6); + memcpy(&cmd.tf.feature, &args[1], 6); cmd.tf.command = args[0]; cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; @@ -214,7 +214,7 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) err = ide_no_data_taskfile(drive, &cmd); args[0] = cmd.tf.command; - memcpy(&args[1], &cmd.tf_array[7], 6); + memcpy(&args[1], &cmd.tf.feature, 6); if (copy_to_user(p, args, 7)) err = -EFAULT; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index c9ef77c5d62e..6857e6aaf20d 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -49,16 +49,17 @@ static void ide_dump_opcode(ide_drive_t *drive) printk(KERN_CONT "0x%02x\n", cmd->tf.command); } -u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) +u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { + struct ide_taskfile *tf = &cmd->tf; u32 high, low; - if (lba48) - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | - tf->hob_lbal; - else - high = tf->device & 0xf; low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + if (lba48) { + tf = &cmd->hob; + high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + } else + high = tf->device & 0xf; return ((u64)high << 24) | low; } @@ -82,7 +83,7 @@ static void ide_dump_sector(ide_drive_t *drive) if (lba48 || (tf->device & ATA_LBA)) printk(KERN_CONT ", LBAsect=%llu", - (unsigned long long)ide_get_lba_addr(tf, lba48)); + (unsigned long long)ide_get_lba_addr(&cmd, lba48)); else printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, tf->device & 0xf, tf->lbal); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index dc84f8bde52a..3160be494aa0 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -23,17 +23,16 @@ #include #include -void ide_tf_dump(const char *s, struct ide_taskfile *tf) +void ide_tf_dump(const char *s, struct ide_cmd *cmd) { #ifdef DEBUG printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", - s, tf->feature, tf->nsect, tf->lbal, - tf->lbam, tf->lbah, tf->device, tf->command); - printk("%s: hob: nsect 0x%02x lbal 0x%02x " - "lbam 0x%02x lbah 0x%02x\n", - s, tf->hob_nsect, tf->hob_lbal, - tf->hob_lbam, tf->hob_lbah); + s, cmd->tf.feature, cmd->tf.nsect, + cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah, + cmd->tf.device, cmd->tf.command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n", + s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah); #endif } @@ -80,12 +79,12 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) memcpy(cmd, orig_cmd, sizeof(*cmd)); if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { - ide_tf_dump(drive->name, tf); + ide_tf_dump(drive->name, cmd); tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); SELECT_MASK(drive, 0); if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) { - u8 data[2] = { tf->data, tf->hob_data }; + u8 data[2] = { cmd->tf.data, cmd->hob.data }; tp_ops->output_data(drive, cmd, data, 2); } @@ -490,10 +489,8 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[0], req_task->hob_ports, - HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(&cmd.tf_array[6], req_task->io_ports, - HDIO_DRIVE_TASK_HDR_SIZE); + memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); cmd.valid.out.tf = IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; @@ -598,7 +595,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) nsect = 0; else if (!nsect) { - nsect = (cmd.tf.hob_nsect << 8) | cmd.tf.nsect; + nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect; if (!nsect) { printk(KERN_ERR "%s: in/out command without data\n", @@ -610,10 +607,8 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) err = ide_raw_taskfile(drive, &cmd, data_buf, nsect); - memcpy(req_task->hob_ports, &cmd.tf_array[0], - HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(req_task->io_ports, &cmd.tf_array[6], - HDIO_DRIVE_TASK_HDR_SIZE); + memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE); if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) && req_task->in_flags.all == 0) { diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 0208dd35c1a3..3ab5bb196d2f 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -86,18 +86,19 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = inb(io_ports->feature_addr); + tf->error = inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); + tf->nsect = inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); + tf->lbal = inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); + tf->lbam = inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); + tf->lbah = inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 38a715e293d4..1238d5561976 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -648,7 +648,7 @@ static int __devinit init_setup_scc(struct pci_dev *dev, static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; + struct ide_taskfile *tf = &cmd->hob; u8 valid = cmd->valid.out.hob; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; @@ -656,16 +656,17 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) HIHI = 0xFF; if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->hob_feature, io_ports->feature_addr); + scc_ide_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); + scc_ide_outb(tf->nsect, io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); + scc_ide_outb(tf->lbal, io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); + scc_ide_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); + scc_ide_outb(tf->lbah, io_ports->lbah_addr); + tf = &cmd->tf; valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) @@ -709,18 +710,19 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = scc_ide_inb(io_ports->feature_addr); + tf->error = scc_ide_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); + tf->nsect = scc_ide_inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); + tf->lbal = scc_ide_inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); + tf->lbam = scc_ide_inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); + tf->lbah = scc_ide_inb(io_ports->lbah_addr); } } diff --git a/include/linux/ide.h b/include/linux/ide.h index 58951f5540bf..e2ea38df26bc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -282,44 +282,25 @@ enum { }; struct ide_taskfile { - u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ - /* 1-5: additional data to support LBA48 */ - union { - u8 hob_error; /* read: error */ - u8 hob_feature; /* write: feature */ - }; - - u8 hob_nsect; - u8 hob_lbal; - u8 hob_lbam; - u8 hob_lbah; - - u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ - - union { /*  7: */ - u8 error; /* read: error */ - u8 feature; /* write: feature */ + u8 data; /* 0: data byte (for TASKFILE ioctl) */ + union { /* 1: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ }; - - u8 nsect; /* 8: number of sectors */ - u8 lbal; /* 9: LBA low */ - u8 lbam; /* 10: LBA mid */ - u8 lbah; /* 11: LBA high */ - - u8 device; /* 12: device select */ - - union { /* 13: */ - u8 status; /*  read: status  */ + u8 nsect; /* 2: number of sectors */ + u8 lbal; /* 3: LBA low */ + u8 lbam; /* 4: LBA mid */ + u8 lbah; /* 5: LBA high */ + u8 device; /* 6: device select */ + union { /* 7: */ + u8 status; /* read: status */ u8 command; /* write: command */ }; }; struct ide_cmd { - union { - struct ide_taskfile tf; - u8 tf_array[14]; - }; - + struct ide_taskfile tf; + struct ide_taskfile hob; struct { struct { u8 tf; @@ -1143,7 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); -void ide_tf_dump(const char *, struct ide_taskfile *); +void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); u8 ide_read_status(ide_hwif_t *); @@ -1510,7 +1491,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) extern void ide_toggle_bounce(ide_drive_t *drive, int on); -u64 ide_get_lba_addr(struct ide_taskfile *, int); +u64 ide_get_lba_addr(struct ide_cmd *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); struct ide_timing { -- cgit From c9ff9e7b64138d87023b733e618f29a1d58543f7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_load() method Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and moving the code that deals with the high order bytes into the only function interested, do_rw_taskfile(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io-std.c | 18 +----------------- drivers/ide/ide-iops.c | 11 +++++------ drivers/ide/ide-probe.c | 8 +++----- drivers/ide/ide-taskfile.c | 3 ++- drivers/ide/scc_pata.c | 18 +----------------- drivers/ide/tx4939ide.c | 7 ++++--- include/linux/ide.h | 4 ++-- 7 files changed, 18 insertions(+), 51 deletions(-) (limited to 'include/linux') diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 66c27768e85b..481e221b233d 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -85,13 +85,11 @@ void ide_dev_select(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_dev_select); -void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->hob; void (*tf_outb)(u8 addr, unsigned long port); - u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) @@ -99,20 +97,6 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) else tf_outb = ide_outb; - if (valid & IDE_VALID_FEATURE) - tf_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf_outb(tf->lbah, io_ports->lbah_addr); - - tf = &cmd->tf; - valid = cmd->valid.out.tf; - if (valid & IDE_VALID_FEATURE) tf_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 0fdf0dfb5743..6f1ed427a484 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -312,10 +312,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + struct ide_taskfile tf; u16 *id = drive->id, i; int error = 0; u8 stat; - struct ide_cmd cmd; #ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_ops) /* check if host supports DMA */ @@ -347,12 +347,11 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) udelay(1); tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; - cmd.tf.feature = SETFEATURES_XFER; - cmd.tf.nsect = speed; + memset(&tf, 0, sizeof(tf)); + tf.feature = SETFEATURES_XFER; + tf.nsect = speed; - tp_ops->tf_load(drive, &cmd); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT); tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 6a98d7c1681a..44d7816c1fe9 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -283,13 +283,11 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) * identify command to be sure of reply */ if (cmd == ATA_CMD_ID_ATAPI) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); + memset(&tf, 0, sizeof(tf)); /* disable DMA & overlap */ - cmd.valid.out.tf = IDE_VALID_FEATURE; - - tp_ops->tf_load(drive, &cmd); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE); } /* ask drive for ID */ diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0318a4cb09de..b1806ed46175 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -98,7 +98,8 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) cmd->tf.device |= drive->select; } - tp_ops->tf_load(drive, cmd); + tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob); + tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf); } switch (cmd->protocol) { diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index feabf5487049..5ecb70cf29dc 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -645,25 +645,9 @@ static int __devinit init_setup_scc(struct pci_dev *dev, return rc; } -static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->hob; - u8 valid = cmd->valid.out.hob; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - - tf = &cmd->tf; - valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index af8b0f68d5cf..564422d23976 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -434,11 +434,12 @@ static void tx4939ide_tf_load_fixup(ide_drive_t *drive) tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); } -static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { - ide_tf_load(drive, cmd); + ide_tf_load(drive, tf, valid); - if (cmd->valid.out.tf & IDE_VALID_DEVICE) + if (valid & IDE_VALID_DEVICE) tx4939ide_tf_load_fixup(drive); } diff --git a/include/linux/ide.h b/include/linux/ide.h index e2ea38df26bc..0ba1c6ab97f8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -624,7 +624,7 @@ struct ide_tp_ops { void (*write_devctl)(struct hwif_s *, u8); void (*dev_select)(ide_drive_t *); - void (*tf_load)(ide_drive_t *, struct ide_cmd *); + void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); void (*tf_read)(ide_drive_t *, struct ide_cmd *); void (*input_data)(ide_drive_t *, struct ide_cmd *, @@ -1132,7 +1132,7 @@ u8 ide_read_altstatus(ide_hwif_t *); void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); -void ide_tf_load(ide_drive_t *, struct ide_cmd *); +void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); void ide_tf_read(ide_drive_t *, struct ide_cmd *); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit From 3153c26b54230d025c6d536e8d3015def4524906 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_read() method Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-atapi.c | 21 ++++++++------------- drivers/ide/ide-io-std.c | 25 +------------------------ drivers/ide/ide-io.c | 2 +- drivers/ide/ide-iops.c | 9 +++------ drivers/ide/ide-lib.c | 2 +- drivers/ide/ide-probe.c | 9 +++------ drivers/ide/ide-taskfile.c | 17 +++++++++++++++++ drivers/ide/ns87415.c | 26 ++------------------------ drivers/ide/scc_pata.c | 25 +------------------------ include/linux/ide.h | 5 +++-- 10 files changed, 40 insertions(+), 101 deletions(-) (limited to 'include/linux') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index a359323d8ffe..7201b176d75b 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -254,15 +254,13 @@ EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | IDE_VALID_NSECT; + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT | + IDE_VALID_LBAM | IDE_VALID_LBAH); - drive->hwif->tp_ops->tf_read(drive, &cmd); - - *bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam; - *ireason = cmd.tf.nsect & 3; + *bcount = (tf.lbah << 8) | tf.lbam; + *ireason = tf.nsect & 3; } EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); @@ -452,14 +450,11 @@ static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, static u8 ide_read_ireason(ide_drive_t *drive) { - struct ide_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_NSECT; + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &cmd); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT); - return cmd.tf.nsect & 3; + return tf.nsect & 3; } static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 481e221b233d..46721c454518 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -112,13 +112,11 @@ void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) } EXPORT_SYMBOL_GPL(ide_tf_load); -void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; u8 (*tf_inb)(unsigned long port); - u8 valid = cmd->valid.in.tf; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) @@ -126,9 +124,6 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) else tf_inb = ide_inb; - /* be sure we're looking at the low order bits */ - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) @@ -141,24 +136,6 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = tf_inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = tf_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - hwif->tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = tf_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = tf_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = tf_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = tf_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = tf_inb(io_ports->lbah_addr); - } } EXPORT_SYMBOL_GPL(ide_tf_read); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index e71c72be7622..2ae02b8d7f8e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -90,7 +90,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) cmd->hob.data = data[1]; } - tp_ops->tf_read(drive, cmd); + ide_tf_readback(drive, cmd); if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) && tf_cmd == ATA_CMD_IDLEIMMEDIATE) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6f1ed427a484..c19a221b1e18 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -37,14 +37,11 @@ void SELECT_MASK(ide_drive_t *drive, int mask) u8 ide_read_error(ide_drive_t *drive) { - struct ide_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_ERROR; + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &cmd); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR); - return cmd.tf.error; + return tf.error; } EXPORT_SYMBOL_GPL(ide_read_error); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 6857e6aaf20d..56ff8c46c7d1 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -79,7 +79,7 @@ static void ide_dump_sector(ide_drive_t *drive) } else cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; - drive->hwif->tp_ops->tf_read(drive, &cmd); + ide_tf_readback(drive, &cmd); if (lba48 || (tf->device & ATA_LBA)) printk(KERN_CONT ", LBAsect=%llu", diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 44d7816c1fe9..7f264ed1141b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -335,14 +335,11 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) static u8 ide_read_device(ide_drive_t *drive) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_DEVICE; + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE); - drive->hwif->tp_ops->tf_read(drive, &cmd); - - return cmd.tf.device; + return tf.device; } /** diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index b1806ed46175..4aa6223c11be 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -23,6 +23,23 @@ #include #include +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + + /* Be sure we're looking at the low order bytes */ + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf); + + if (cmd->tf_flags & IDE_TFLAG_LBA48) { + tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob); + } +} + void ide_tf_dump(const char *s, struct ide_cmd *cmd) { #ifdef DEBUG diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index f1305f4d2be7..95327a2c2422 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -61,14 +61,10 @@ static u8 superio_dma_sff_read_status(ide_hwif_t *hwif) return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS); } -static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 valid = cmd->valid.in.tf; - - /* be sure we're looking at the low order bits */ - ide_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = inb(io_ports->feature_addr); @@ -82,24 +78,6 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = superio_ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - ide_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = inb(io_ports->lbah_addr); - } } static void ns87415_dev_select(ide_drive_t *drive); diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 5ecb70cf29dc..5be41f25204f 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -663,14 +663,9 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) scc_ide_outb(tf->device, io_ports->device_addr); } -static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 valid = cmd->valid.in.tf; - - /* be sure we're looking at the low order bits */ - scc_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = scc_ide_inb(io_ports->feature_addr); @@ -684,24 +679,6 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = scc_ide_inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = scc_ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - scc_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - } } static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, diff --git a/include/linux/ide.h b/include/linux/ide.h index 0ba1c6ab97f8..ff65fffb078f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -625,7 +625,7 @@ struct ide_tp_ops { void (*dev_select)(ide_drive_t *); void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); - void (*tf_read)(ide_drive_t *, struct ide_cmd *); + void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); void (*input_data)(ide_drive_t *, struct ide_cmd *, void *, unsigned int); @@ -1124,6 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); @@ -1133,7 +1134,7 @@ void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); -void ide_tf_read(ide_drive_t *, struct ide_cmd *); +void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit From 7831d56b0a3544cbb6f82f76c34ca95e24d5b676 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Apr 2009 20:13:16 +0100 Subject: tty: MAX3100 Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox Signed-off-by: Linus Torvalds --- drivers/serial/max3100.c | 927 +++++++++++++++++++++++++++++++++++++++++ include/linux/serial_max3100.h | 52 +++ 2 files changed, 979 insertions(+) create mode 100644 drivers/serial/max3100.c create mode 100644 include/linux/serial_max3100.h (limited to 'include/linux') diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c new file mode 100644 index 000000000000..9fd33e5622bd --- /dev/null +++ b/drivers/serial/max3100.c @@ -0,0 +1,927 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include +#include +#include +#include +#include +#include + +#include + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.info) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.info->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.info->port.tty != NULL) { + tty_flip_buffer_push(s->port.info->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.info->port.tty != NULL) + tty_flip_buffer_push(s->port.info->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + struct tty_struct *tty = s->port.info->port.tty; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + if (!tty) + return; + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_get_baud_rate(tty); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_encode_baud_rate(tty, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.info->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 000000000000..4976befb6aeb --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif -- cgit From 692d0eb9e02cf81fb387ff891f53840db2f3110a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:13 +0100 Subject: dm: remove limited barrier support Prepare for full barrier implementation: first remove the restricted support. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-linear.c | 1 - drivers/md/dm-table.c | 19 ------------------- drivers/md/dm.c | 15 ++++++++++----- drivers/md/dm.h | 1 - include/linux/device-mapper.h | 1 - 5 files changed, 10 insertions(+), 27 deletions(-) (limited to 'include/linux') diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index bfa107f59d96..79fb53e51c70 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -142,7 +142,6 @@ static struct target_type linear_target = { .status = linear_status, .ioctl = linear_ioctl, .merge = linear_merge, - .features = DM_TARGET_SUPPORTS_BARRIERS, }; int __init dm_linear_init(void) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 02d0b489fad6..429b50b975d5 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -52,8 +52,6 @@ struct dm_table { sector_t *highs; struct dm_target *targets; - unsigned barriers_supported:1; - /* * Indicates the rw permissions for the new logical * device. This should be a combination of FMODE_READ @@ -243,7 +241,6 @@ int dm_table_create(struct dm_table **result, fmode_t mode, INIT_LIST_HEAD(&t->devices); atomic_set(&t->holders, 0); - t->barriers_supported = 1; if (!num_targets) num_targets = KEYS_PER_NODE; @@ -751,10 +748,6 @@ int dm_table_add_target(struct dm_table *t, const char *type, /* FIXME: the plan is to combine high here and then have * the merge fn apply the target level restrictions. */ combine_restrictions_low(&t->limits, &tgt->limits); - - if (!(tgt->type->features & DM_TARGET_SUPPORTS_BARRIERS)) - t->barriers_supported = 0; - return 0; bad: @@ -799,12 +792,6 @@ int dm_table_complete(struct dm_table *t) check_for_valid_limits(&t->limits); - /* - * We only support barriers if there is exactly one underlying device. - */ - if (!list_is_singular(&t->devices)) - t->barriers_supported = 0; - /* how many indexes will the btree have ? */ leaf_nodes = dm_div_up(t->num_targets, KEYS_PER_NODE); t->depth = 1 + int_log(leaf_nodes, CHILDREN_PER_NODE); @@ -1059,12 +1046,6 @@ struct mapped_device *dm_table_get_md(struct dm_table *t) return t->md; } -int dm_table_barrier_ok(struct dm_table *t) -{ - return t->barriers_supported; -} -EXPORT_SYMBOL(dm_table_barrier_ok); - EXPORT_SYMBOL(dm_vcalloc); EXPORT_SYMBOL(dm_get_device); EXPORT_SYMBOL(dm_put_device); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 25d86e2c01f2..ab3b5d84df65 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -851,11 +851,7 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) bio_io_error(bio); return; } - if (unlikely(bio_barrier(bio) && !dm_table_barrier_ok(ci.map))) { - dm_table_put(ci.map); - bio_endio(bio, -EOPNOTSUPP); - return; - } + ci.md = md; ci.bio = bio; ci.io = alloc_io(md); @@ -937,6 +933,15 @@ static int dm_request(struct request_queue *q, struct bio *bio) struct mapped_device *md = q->queuedata; int cpu; + /* + * There is no use in forwarding any barrier request since we can't + * guarantee it is (or can be) handled by the targets correctly. + */ + if (unlikely(bio_barrier(bio))) { + bio_endio(bio, -EOPNOTSUPP); + return 0; + } + down_read(&md->io_lock); cpu = part_stat_lock(); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index b48397c0abbd..a31506d93e91 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -52,7 +52,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits); * To check the return value from dm_table_find_target(). */ #define dm_target_is_valid(t) ((t)->table) -int dm_table_barrier_ok(struct dm_table *t); /*----------------------------------------------------------------- * A registry of target types. diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 66ec05a57955..ded2d7c42668 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -116,7 +116,6 @@ void dm_put_device(struct dm_target *ti, struct dm_dev *d); /* * Target features */ -#define DM_TARGET_SUPPORTS_BARRIERS 0x00000001 struct target_type { uint64_t features; -- cgit From 47788c58e66c050982241d9a05eb690daceb05a9 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 8 Apr 2009 20:40:59 +0200 Subject: tracing/syscalls: use a dedicated file header Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck Tested-by: Tony Luck Signed-off-by: Frederic Weisbecker Acked-by: Tony Luck Signed-off-by: Steven Rostedt Cc: Peter Zijlstra Cc: Jason Baron Cc: "Frank Ch. Eigler" Cc: Mathieu Desnoyers Cc: KOSAKI Motohiro Cc: Lai Jiangshan Cc: Jiaying Zhang Cc: Michael Rubin Cc: Martin Bligh Cc: Michael Davidson LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar --- arch/x86/kernel/ftrace.c | 2 ++ arch/x86/kernel/ptrace.c | 3 ++- include/linux/ftrace.h | 29 ----------------------------- include/linux/syscalls.h | 2 +- include/trace/syscall.h | 35 +++++++++++++++++++++++++++++++++++ kernel/trace/trace_syscalls.c | 2 +- 6 files changed, 41 insertions(+), 32 deletions(-) create mode 100644 include/trace/syscall.h (limited to 'include/linux') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 70a10ca100f6..18dfa30795c9 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -18,6 +18,8 @@ #include #include +#include + #include #include #include diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index fe9345c967de..23b7c8f017e2 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -35,6 +34,8 @@ #include #include +#include + #include "tls.h" enum x86_regset { diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ff112a872d75..8a0c2f221e6b 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -511,33 +511,4 @@ static inline void trace_hw_branch_oops(void) {} #endif /* CONFIG_HW_BRANCH_TRACER */ -/* - * A syscall entry in the ftrace syscalls array. - * - * @name: name of the syscall - * @nb_args: number of parameters it takes - * @types: list of types as strings - * @args: list of args as strings (args[i] matches types[i]) - */ -struct syscall_metadata { - const char *name; - int nb_args; - const char **types; - const char **args; -}; - -#ifdef CONFIG_FTRACE_SYSCALLS -extern void arch_init_ftrace_syscalls(void); -extern struct syscall_metadata *syscall_nr_to_meta(int nr); -extern void start_ftrace_syscalls(void); -extern void stop_ftrace_syscalls(void); -extern void ftrace_syscall_enter(struct pt_regs *regs); -extern void ftrace_syscall_exit(struct pt_regs *regs); -#else -static inline void start_ftrace_syscalls(void) { } -static inline void stop_ftrace_syscalls(void) { } -static inline void ftrace_syscall_enter(struct pt_regs *regs) { } -static inline void ftrace_syscall_exit(struct pt_regs *regs) { } -#endif - #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 6470f74074af..dabe4ad89141 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -65,7 +65,7 @@ struct old_linux_dirent; #include #include #include -#include +#include #define __SC_DECL1(t1, a1) t1 a1 #define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) diff --git a/include/trace/syscall.h b/include/trace/syscall.h new file mode 100644 index 000000000000..8cfe515cbc47 --- /dev/null +++ b/include/trace/syscall.h @@ -0,0 +1,35 @@ +#ifndef _TRACE_SYSCALL_H +#define _TRACE_SYSCALL_H + +#include + +/* + * A syscall entry in the ftrace syscalls array. + * + * @name: name of the syscall + * @nb_args: number of parameters it takes + * @types: list of types as strings + * @args: list of args as strings (args[i] matches types[i]) + */ +struct syscall_metadata { + const char *name; + int nb_args; + const char **types; + const char **args; +}; + +#ifdef CONFIG_FTRACE_SYSCALLS +extern void arch_init_ftrace_syscalls(void); +extern struct syscall_metadata *syscall_nr_to_meta(int nr); +extern void start_ftrace_syscalls(void); +extern void stop_ftrace_syscalls(void); +extern void ftrace_syscall_enter(struct pt_regs *regs); +extern void ftrace_syscall_exit(struct pt_regs *regs); +#else +static inline void start_ftrace_syscalls(void) { } +static inline void stop_ftrace_syscalls(void) { } +static inline void ftrace_syscall_enter(struct pt_regs *regs) { } +static inline void ftrace_syscall_exit(struct pt_regs *regs) { } +#endif + +#endif /* _TRACE_SYSCALL_H */ diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index a2a3af29c943..5e579645ac86 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -1,5 +1,5 @@ +#include #include -#include #include #include "trace_output.h" -- cgit From e3c8ca8336707062f3f7cb1cd7e6b3c753baccdd Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 8 Apr 2009 19:45:12 -0500 Subject: sched: do not count frozen tasks toward load Freezing tasks via the cgroup freezer causes the load average to climb because the freezer's current implementation puts frozen tasks in uninterruptible sleep (D state). Some applications which perform job-scheduling functions consult the load average when making decisions. If a cgroup is frozen, the load average does not provide a useful measure of the system's utilization to such applications. This is especially inconvenient if the job scheduler employs the cgroup freezer as a mechanism for preempting low priority jobs. Contrast this with using SIGSTOP for the same purpose: the stopped tasks do not count toward system load. Change task_contributes_to_load() to return false if the task is frozen. This results in /proc/loadavg behavior that better meets users' expectations. Signed-off-by: Nathan Lynch Acked-by: Andrew Morton Acked-by: Nigel Cunningham Tested-by: Nigel Cunningham Cc: Cc: containers@lists.linux-foundation.org Cc: linux-pm@lists.linux-foundation.org Cc: Matt Helsley LKML-Reference: <20090408194512.47a99b95@manatee.lan> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 98e1fe51601d..b4c38bc8049c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -205,7 +205,8 @@ extern unsigned long long time_sync_thresh; #define task_is_stopped_or_traced(task) \ ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) #define task_contributes_to_load(task) \ - ((task->state & TASK_UNINTERRUPTIBLE) != 0) + ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ + (task->flags & PF_FROZEN) == 0) #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) -- cgit From 97c18e2c7a8e36d2d83d50ee070314aadac73a11 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 9 Apr 2009 10:35:47 +0800 Subject: module: try_then_request_module must wait Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: Herbert Xu Tested-by: Maciej Rutecki Tested-by: Patrick McHardy Signed-off-by: Linus Torvalds --- include/linux/kmod.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kmod.h b/include/linux/kmod.h index d5fa565086d1..384ca8bbf1ac 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -34,7 +34,7 @@ extern int __request_module(bool wait, const char *name, ...) \ #define request_module(mod...) __request_module(true, mod) #define request_module_nowait(mod...) __request_module(false, mod) #define try_then_request_module(x, mod...) \ - ((x) ?: (__request_module(false, mod), (x))) + ((x) ?: (__request_module(true, mod), (x))) #else static inline int request_module(const char *name, ...) { return -ENOSYS; } static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; } -- cgit From 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 8 Apr 2009 16:58:57 +0800 Subject: Make __stringify support variable argument macros too For example: __stringify(__entry->irq, __entry->ret) will now convert it to: "REC->irq, REC->ret" It also still supports single arguments as the old macro did. Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49DC6751.30308@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- include/linux/stringify.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/stringify.h b/include/linux/stringify.h index 0b4388356c87..841cec8ed525 100644 --- a/include/linux/stringify.h +++ b/include/linux/stringify.h @@ -6,7 +6,7 @@ * converts to "bar". */ -#define __stringify_1(x) #x -#define __stringify(x) __stringify_1(x) +#define __stringify_1(x...) #x +#define __stringify(x...) __stringify_1(x) #endif /* !__LINUX_STRINGIFY_H */ -- cgit From 066123a535927b3f17cac2305258cc71abdb0d92 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Apr 2009 12:02:40 -0700 Subject: percpu: unbreak alpha percpu For the time being, move the generic percpu_*() accessors to linux/percpu.h. asm-generic/percpu.h is meant to carry generic stuff for low level stuff - declarations, definitions and pointer offset calculation and so on but not for generic interface. Signed-off-by: Ingo Molnar --- include/asm-generic/percpu.h | 52 -------------------------------------------- include/linux/percpu.h | 52 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+), 52 deletions(-) (limited to 'include/linux') diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index 00f45ff081a6..b0e63c672ebd 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -80,56 +80,4 @@ extern void setup_per_cpu_areas(void); #define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \ __typeof__(type) per_cpu_var(name) -/* - * Optional methods for optimized non-lvalue per-cpu variable access. - * - * @var can be a percpu variable or a field of it and its size should - * equal char, int or long. percpu_read() evaluates to a lvalue and - * all others to void. - * - * These operations are guaranteed to be atomic w.r.t. preemption. - * The generic versions use plain get/put_cpu_var(). Archs are - * encouraged to implement single-instruction alternatives which don't - * require preemption protection. - */ -#ifndef percpu_read -# define percpu_read(var) \ - ({ \ - typeof(per_cpu_var(var)) __tmp_var__; \ - __tmp_var__ = get_cpu_var(var); \ - put_cpu_var(var); \ - __tmp_var__; \ - }) -#endif - -#define __percpu_generic_to_op(var, val, op) \ -do { \ - get_cpu_var(var) op val; \ - put_cpu_var(var); \ -} while (0) - -#ifndef percpu_write -# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) -#endif - -#ifndef percpu_add -# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) -#endif - -#ifndef percpu_sub -# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) -#endif - -#ifndef percpu_and -# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) -#endif - -#ifndef percpu_or -# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) -#endif - -#ifndef percpu_xor -# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) -#endif - #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index ee5615d65211..cfda2d5ad319 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -168,4 +168,56 @@ static inline void free_percpu(void *p) #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ __alignof__(type)) +/* + * Optional methods for optimized non-lvalue per-cpu variable access. + * + * @var can be a percpu variable or a field of it and its size should + * equal char, int or long. percpu_read() evaluates to a lvalue and + * all others to void. + * + * These operations are guaranteed to be atomic w.r.t. preemption. + * The generic versions use plain get/put_cpu_var(). Archs are + * encouraged to implement single-instruction alternatives which don't + * require preemption protection. + */ +#ifndef percpu_read +# define percpu_read(var) \ + ({ \ + typeof(per_cpu_var(var)) __tmp_var__; \ + __tmp_var__ = get_cpu_var(var); \ + put_cpu_var(var); \ + __tmp_var__; \ + }) +#endif + +#define __percpu_generic_to_op(var, val, op) \ +do { \ + get_cpu_var(var) op val; \ + put_cpu_var(var); \ +} while (0) + +#ifndef percpu_write +# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) +#endif + +#ifndef percpu_add +# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) +#endif + +#ifndef percpu_sub +# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) +#endif + +#ifndef percpu_and +# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) +#endif + +#ifndef percpu_or +# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) +#endif + +#ifndef percpu_xor +# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) +#endif + #endif /* __LINUX_PERCPU_H */ -- cgit From 9eeba6138cefc0435695463ddadb0d95e0a6bcd2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 11 Apr 2009 03:17:17 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint Impact: provide useful missing info for developers Kernel taint can occur in several situations such as warnings, load of prorietary or staging modules, bad page, etc... But when such taint happens, a developer might still be working on the kernel, expecting that lockdep is still enabled. But a taint disables lockdep without ever warning about it. Such a kernel behaviour doesn't really help for kernel development. This patch adds this missing warning. Since the taint is done most of the time after the main message that explain the real source issue, it seems safe to warn about it inside add_taint() so that it appears at last, without hurting the main information. v2: Use a generic helper to disable lockdep instead of an open coded xchg(). Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 7 +++++++ kernel/panic.c | 10 ++++++++-- lib/debug_locks.c | 2 +- 3 files changed, 16 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 096476f1fb35..493dedb7a67b 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -2,12 +2,19 @@ #define __LINUX_DEBUG_LOCKING_H #include +#include struct task_struct; extern int debug_locks; extern int debug_locks_silent; + +static inline int __debug_locks_off(void) +{ + return xchg(&debug_locks, 0); +} + /* * Generic 'turn off all lock debugging' function: */ diff --git a/kernel/panic.c b/kernel/panic.c index 3fd8c5bf8b39..940ca14f6dbf 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -213,8 +213,14 @@ unsigned long get_taint(void) void add_taint(unsigned flag) { - /* can't trust the integrity of the kernel anymore: */ - debug_locks = 0; + /* + * Can't trust the integrity of the kernel anymore. + * We don't call directly debug_locks_off() because the issue + * is not necessarily serious enough to set oops_in_progress to 1 + */ + if (__debug_locks_off()) + printk(KERN_WARNING "Disabling lockdep due to kernel taint\n"); + set_bit(flag, &tainted_mask); } EXPORT_SYMBOL(add_taint); diff --git a/lib/debug_locks.c b/lib/debug_locks.c index 0218b4693dd8..bc3b11731b9c 100644 --- a/lib/debug_locks.c +++ b/lib/debug_locks.c @@ -36,7 +36,7 @@ int debug_locks_silent; */ int debug_locks_off(void) { - if (xchg(&debug_locks, 0)) { + if (__debug_locks_off()) { if (!debug_locks_silent) { oops_in_progress = 1; console_verbose(); -- cgit From c758e8cffe3b1bc7970d579371db01b19ff440bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2009 17:02:14 +0200 Subject: i2c: Fix sparse warnings for I2C_BOARD_INFO() Since the first argument to I2C_BOARD_INFO() must be a string constant, there is no need to parenthesise it, and adding parentheses results in an invalid initialiser for char[]. gcc obviously accepts this syntax as an extension, but sparse complains, e.g.: drivers/net/sfc/boards.c:173:2: warning: array initialized from parenthesized string constant Therefore, remove the parentheses. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ee11eb9092..ad2580596033 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -274,7 +274,7 @@ struct i2c_board_info { * are provided using conventional syntax. */ #define I2C_BOARD_INFO(dev_type, dev_addr) \ - .type = (dev_type), .addr = (dev_addr) + .type = dev_type, .addr = (dev_addr) /* Add-on boards should register/unregister their devices; e.g. a board -- cgit From 0ad30b8fd5fe798aae80df6344b415d8309342cc Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 13 Apr 2009 09:56:14 -0500 Subject: add some long-missing capabilities to fs_mask When POSIX capabilities were introduced during the 2.1 Linux cycle, the fs mask, which represents the capabilities which having fsuid==0 is supposed to grant, did not include CAP_MKNOD and CAP_LINUX_IMMUTABLE. However, before capabilities the privilege to call these did in fact depend upon fsuid==0. This patch introduces those capabilities into the fsmask, restoring the old behavior. See the thread starting at http://lkml.org/lkml/2009/3/11/157 for reference. Note that if this fix is deemed valid, then earlier kernel versions (2.4 and 2.2) ought to be fixed too. Changelog: [Mar 23] Actually delete old CAP_FS_SET definition... [Mar 20] Updated against J. Bruce Fields's patch Reported-by: Igor Zhbanov Signed-off-by: Serge E. Hallyn Cc: stable@kernel.org Cc: J. Bruce Fields Signed-off-by: Linus Torvalds --- include/linux/capability.h | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index 4864a43b2b45..c3021105edc0 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -377,7 +377,21 @@ struct cpu_vfs_cap_data { #define CAP_FOR_EACH_U32(__capi) \ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) +/* + * CAP_FS_MASK and CAP_NFSD_MASKS: + * + * The fs mask is all the privileges that fsuid==0 historically meant. + * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE. + * + * It has never meant setting security.* and trusted.* xattrs. + * + * We could also define fsmask as follows: + * 1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions + * 2. The security.* and trusted.* xattrs are fs-related MAC permissions + */ + # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ + | CAP_TO_MASK(CAP_MKNOD) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ | CAP_TO_MASK(CAP_DAC_READ_SEARCH) \ | CAP_TO_MASK(CAP_FOWNER) \ @@ -392,11 +406,12 @@ struct cpu_vfs_cap_data { # define CAP_EMPTY_SET ((kernel_cap_t){{ 0, 0 }}) # define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }}) # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }}) -# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } }) +# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ + | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \ + CAP_FS_MASK_B1 } }) # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ - | CAP_TO_MASK(CAP_SYS_RESOURCE) \ - | CAP_TO_MASK(CAP_MKNOD), \ - CAP_FS_MASK_B1 } }) + | CAP_TO_MASK(CAP_SYS_RESOURCE), \ + CAP_FS_MASK_B1 } }) #endif /* _KERNEL_CAPABILITY_U32S != 2 */ -- cgit From a8729eb302a5b5da8b0b4d29582c42648a2e0f12 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:42 +0000 Subject: phylib: Allow early-out in phy_change Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 9 +++++++++ include/linux/phy.h | 6 ++++++ 2 files changed, 15 insertions(+) (limited to 'include/linux') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 3ff1f425f1bb..e3b8932d7d74 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -655,6 +655,10 @@ static void phy_change(struct work_struct *work) struct phy_device *phydev = container_of(work, struct phy_device, phy_queue); + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + goto ignore; + err = phy_disable_interrupts(phydev); if (err) @@ -681,6 +685,11 @@ static void phy_change(struct work_struct *work) return; +ignore: + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); + return; + irq_enable_err: disable_irq(phydev->irq); atomic_inc(&phydev->irq_disable); diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a4b034..97e40cb6b588 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit From ebde441177da3bad156701d351509f34295282ab Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:41 -0700 Subject: fbdev: fix color component field length documentation The documentation about the meaning of the color component bitfield lengths in pseudocolor modes is inconsistent. Fix it, so that it indicates the correct interpretation everywhere, i.e. that 1 << length is the number of palette entries. Signed-off-by: Michal Januszewski Acked-by: Krzysztof Helt Cc: Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/skeletonfb.c | 8 +++++--- drivers/video/vfb.c | 11 +++++++---- include/linux/fb.h | 8 ++++++-- 3 files changed, 18 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c index a439159204a8..89158bc71da2 100644 --- a/drivers/video/skeletonfb.c +++ b/drivers/video/skeletonfb.c @@ -308,9 +308,11 @@ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green, * color depth = SUM(var->{color}.length) * * Pseudocolor: - * var->{color}.offset is 0 - * var->{color}.length contains width of DAC or the number of unique - * colors available (color depth) + * var->{color}.offset is 0 unless the palette index takes less than + * bits_per_pixel bits and is stored in the upper + * bits of the pixel value + * var->{color}.length is set so that 1 << length is the number of + * available palette entries * pseudo_palette is not used * RAMDAC[X] is programmed to (red, green, blue) * color depth = var->{color}.length diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c index cc919ae46571..050d432c7d95 100644 --- a/drivers/video/vfb.c +++ b/drivers/video/vfb.c @@ -318,13 +318,16 @@ static int vfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * {hardwarespecific} contains width of RAMDAC * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) - * + * * Pseudocolor: - * uses offset = 0 && length = RAMDAC register width. - * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.offset is 0 unless the palette index takes less than + * bits_per_pixel bits and is stored in the upper + * bits of the pixel value + * var->{color}.length is set so that 1 << length is the number of available + * palette entries * cmap is not used * RAMDAC[X] is programmed to (red, green, blue) + * * Truecolor: * does not use DAC. Usually 3 are present. * var->{color}.offset contains start of bitfield diff --git a/include/linux/fb.h b/include/linux/fb.h index f563c5013932..330c4b1bfcaa 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -173,8 +173,12 @@ struct fb_fix_screeninfo { /* Interpretation of offset for color fields: All offsets are from the right, * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. This implies - * big-endian byte order if bits_per_pixel is greater than 8. + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). */ struct fb_bitfield { __u32 offset; /* beginning of bitfield */ -- cgit From 251eb40f5ccd07a905633a816fbf8f2b6b25cced Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 13 Apr 2009 14:39:45 -0700 Subject: hwmon: sht15 humidity sensor driver Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/sht15.c | 692 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/sht15.h | 24 ++ 4 files changed, 727 insertions(+) create mode 100644 drivers/hwmon/sht15.c create mode 100644 include/linux/sht15.h (limited to 'include/linux') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0e8a9185f676..d73f5f473e38 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -692,6 +692,16 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GENERIC_GPIO + help + If you say yes here you get support for the Sensiron SHT10, SHT11, + SHT15, SHT71, SHT75 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht15. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 1d3757837b4f..0ae26984ba45 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c new file mode 100644 index 000000000000..6cbdc2fea734 --- /dev/null +++ b/drivers/hwmon/sht15.c @@ -0,0 +1,692 @@ +/* + * sht15.c - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Currently ignoring checksum on readings. + * Default resolution only (14bit temp, 12bit humidity) + * Ignoring battery status. + * Heater not enabled. + * Timings are all conservative. + * + * Data sheet available (1/2009) at + * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf + * + * Regulator supply name = vcc + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SHT15_MEASURE_TEMP 3 +#define SHT15_MEASURE_RH 5 + +#define SHT15_READING_NOTHING 0 +#define SHT15_READING_TEMP 1 +#define SHT15_READING_HUMID 2 + +/* Min timings in nsecs */ +#define SHT15_TSCKL 100 /* clock low */ +#define SHT15_TSCKH 100 /* clock high */ +#define SHT15_TSU 150 /* data setup time */ + +/** + * struct sht15_temppair - elements of voltage dependant temp calc + * @vdd: supply voltage in microvolts + * @d1: see data sheet + */ +struct sht15_temppair { + int vdd; /* microvolts */ + int d1; +}; + +/* Table 9 from data sheet - relates temperature calculation + * to supply voltage. + */ +static const struct sht15_temppair temppoints[] = { + { 2500000, -39400 }, + { 3000000, -39600 }, + { 3500000, -39700 }, + { 4000000, -39800 }, + { 5000000, -40100 }, +}; + +/** + * struct sht15_data - device instance specific data + * @pdata: platform data (gpio's etc) + * @read_work: bh of interrupt handler + * @wait_queue: wait queue for getting values from device + * @val_temp: last temperature value read from device + * @val_humid: last humidity value read from device + * @flag: status flag used to identify what the last request was + * @valid: are the current stored values valid (start condition) + * @last_updat: time of last update + * @read_lock: mutex to ensure only one read in progress + * at a time. + * @dev: associate device structure + * @hwmon_dev: device associated with hwmon subsystem + * @reg: associated regulator (if specified) + * @nb: notifier block to handle notifications of voltage changes + * @supply_uV: local copy of supply voltage used to allow + * use of regulator consumer if available + * @supply_uV_valid: indicates that an updated value has not yet + * been obtained from the regulator and so any calculations + * based upon it will be invalid. + * @update_supply_work: work struct that is used to update the supply_uV + * @interrupt_handled: flag used to indicate a hander has been scheduled + */ +struct sht15_data { + struct sht15_platform_data *pdata; + struct work_struct read_work; + wait_queue_head_t wait_queue; + uint16_t val_temp; + uint16_t val_humid; + u8 flag; + u8 valid; + unsigned long last_updat; + struct mutex read_lock; + struct device *dev; + struct device *hwmon_dev; + struct regulator *reg; + struct notifier_block nb; + int supply_uV; + int supply_uV_valid; + struct work_struct update_supply_work; + atomic_t interrupt_handled; +}; + +/** + * sht15_connection_reset() - reset the comms interface + * @data: sht15 specific data + * + * This implements section 3.4 of the data sheet + */ +static void sht15_connection_reset(struct sht15_data *data) +{ + int i; + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + for (i = 0; i < 9; ++i) { + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + } +} +/** + * sht15_send_bit() - send an individual bit to the device + * @data: device state data + * @val: value of bit to be sent + **/ +static inline void sht15_send_bit(struct sht15_data *data, int val) +{ + + gpio_set_value(data->pdata->gpio_data, val); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); /* clock low time */ +} + +/** + * sht15_transmission_start() - specific sequence for new transmission + * + * @data: device state data + * Timings for this are not documented on the data sheet, so very + * conservative ones used in implementation. This implements + * figure 12 on the data sheet. + **/ +static void sht15_transmission_start(struct sht15_data *data) +{ + /* ensure data is high and output */ + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_data, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); +} +/** + * sht15_send_byte() - send a single byte to the device + * @data: device state + * @byte: value to be sent + **/ +static void sht15_send_byte(struct sht15_data *data, u8 byte) +{ + int i; + for (i = 0; i < 8; i++) { + sht15_send_bit(data, !!(byte & 0x80)); + byte <<= 1; + } +} +/** + * sht15_wait_for_response() - checks for ack from device + * @data: device state + **/ +static int sht15_wait_for_response(struct sht15_data *data) +{ + gpio_direction_input(data->pdata->gpio_data); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + if (gpio_get_value(data->pdata->gpio_data)) { + gpio_set_value(data->pdata->gpio_sck, 0); + dev_err(data->dev, "Command not acknowledged\n"); + sht15_connection_reset(data); + return -EIO; + } + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + return 0; +} + +/** + * sht15_send_cmd() - Sends a command to the device. + * @data: device state + * @cmd: command byte to be sent + * + * On entry, sck is output low, data is output pull high + * and the interrupt disabled. + **/ +static int sht15_send_cmd(struct sht15_data *data, u8 cmd) +{ + int ret = 0; + sht15_transmission_start(data); + sht15_send_byte(data, cmd); + ret = sht15_wait_for_response(data); + return ret; +} +/** + * sht15_update_single_val() - get a new value from device + * @data: device instance specific data + * @command: command sent to request value + * @timeout_msecs: timeout after which comms are assumed + * to have failed are reset. + **/ +static inline int sht15_update_single_val(struct sht15_data *data, + int command, + int timeout_msecs) +{ + int ret; + ret = sht15_send_cmd(data, command); + if (ret) + return ret; + + gpio_direction_input(data->pdata->gpio_data); + atomic_set(&data->interrupt_handled, 0); + + enable_irq(gpio_to_irq(data->pdata->gpio_data)); + if (gpio_get_value(data->pdata->gpio_data) == 0) { + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); + /* Only relevant if the interrupt hasn't occured. */ + if (!atomic_read(&data->interrupt_handled)) + schedule_work(&data->read_work); + } + ret = wait_event_timeout(data->wait_queue, + (data->flag == SHT15_READING_NOTHING), + msecs_to_jiffies(timeout_msecs)); + if (ret == 0) {/* timeout occurred */ + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));; + sht15_connection_reset(data); + return -ETIME; + } + return 0; +} + +/** + * sht15_update_vals() - get updated readings from device if too old + * @data: device state + **/ +static int sht15_update_vals(struct sht15_data *data) +{ + int ret = 0; + int timeout = HZ; + + mutex_lock(&data->read_lock); + if (time_after(jiffies, data->last_updat + timeout) + || !data->valid) { + data->flag = SHT15_READING_HUMID; + ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160); + if (ret) + goto error_ret; + data->flag = SHT15_READING_TEMP; + ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400); + if (ret) + goto error_ret; + data->valid = 1; + data->last_updat = jiffies; + } +error_ret: + mutex_unlock(&data->read_lock); + + return ret; +} + +/** + * sht15_calc_temp() - convert the raw reading to a temperature + * @data: device state + * + * As per section 4.3 of the data sheet. + **/ +static inline int sht15_calc_temp(struct sht15_data *data) +{ + int d1 = 0; + int i; + + for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++) + /* Find pointer to interpolate */ + if (data->supply_uV > temppoints[i - 1].vdd) { + d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd) + * (temppoints[i].d1 - temppoints[i - 1].d1) + / (temppoints[i].vdd - temppoints[i - 1].vdd) + + temppoints[i - 1].d1; + break; + } + + return data->val_temp*10 + d1; +} + +/** + * sht15_calc_humid() - using last temperature convert raw to humid + * @data: device state + * + * This is the temperature compensated version as per section 4.2 of + * the data sheet. + **/ +static inline int sht15_calc_humid(struct sht15_data *data) +{ + int RHlinear; /* milli percent */ + int temp = sht15_calc_temp(data); + + const int c1 = -4; + const int c2 = 40500; /* x 10 ^ -6 */ + const int c3 = 2800; /* x10 ^ -9 */ + + RHlinear = c1*1000 + + c2 * data->val_humid/1000 + + (data->val_humid * data->val_humid * c3)/1000000; + return (temp - 25000) * (10000 + 800 * data->val_humid) + / 1000000 + RHlinear; +} + +static ssize_t sht15_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + + /* Technically no need to read humidity as well */ + ret = sht15_update_vals(data); + + return ret ? ret : sprintf(buf, "%d\n", + sht15_calc_temp(data)); +} + +static ssize_t sht15_show_humidity(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + + ret = sht15_update_vals(data); + + return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data)); + +}; +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + return sprintf(buf, "%s\n", pdev->name); +} + +static SENSOR_DEVICE_ATTR(temp1_input, + S_IRUGO, sht15_show_temp, + NULL, 0); +static SENSOR_DEVICE_ATTR(humidity1_input, + S_IRUGO, sht15_show_humidity, + NULL, 0); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static struct attribute *sht15_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_humidity1_input.dev_attr.attr, + &dev_attr_name.attr, + NULL, +}; + +static const struct attribute_group sht15_attr_group = { + .attrs = sht15_attrs, +}; + +static irqreturn_t sht15_interrupt_fired(int irq, void *d) +{ + struct sht15_data *data = d; + /* First disable the interrupt */ + disable_irq_nosync(irq); + atomic_inc(&data->interrupt_handled); + /* Then schedule a reading work struct */ + if (data->flag != SHT15_READING_NOTHING) + schedule_work(&data->read_work); + return IRQ_HANDLED; +} + +/* Each byte of data is acknowledged by pulling the data line + * low for one clock pulse. + */ +static void sht15_ack(struct sht15_data *data) +{ + gpio_direction_output(data->pdata->gpio_data, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_data, 1); + + gpio_direction_input(data->pdata->gpio_data); +} +/** + * sht15_end_transmission() - notify device of end of transmission + * @data: device state + * + * This is basically a NAK. (single clock pulse, data high) + **/ +static void sht15_end_transmission(struct sht15_data *data) +{ + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); +} + +static void sht15_bh_read_data(struct work_struct *work_s) +{ + int i; + uint16_t val = 0; + struct sht15_data *data + = container_of(work_s, struct sht15_data, + read_work); + /* Firstly, verify the line is low */ + if (gpio_get_value(data->pdata->gpio_data)) { + /* If not, then start the interrupt again - care + here as could have gone low in meantime so verify + it hasn't! + */ + atomic_set(&data->interrupt_handled, 0); + enable_irq(gpio_to_irq(data->pdata->gpio_data)); + /* If still not occured or another handler has been scheduled */ + if (gpio_get_value(data->pdata->gpio_data) + || atomic_read(&data->interrupt_handled)) + return; + } + /* Read the data back from the device */ + for (i = 0; i < 16; ++i) { + val <<= 1; + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + val |= !!gpio_get_value(data->pdata->gpio_data); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + if (i == 7) + sht15_ack(data); + } + /* Tell the device we are done */ + sht15_end_transmission(data); + + switch (data->flag) { + case SHT15_READING_TEMP: + data->val_temp = val; + break; + case SHT15_READING_HUMID: + data->val_humid = val; + break; + } + + data->flag = SHT15_READING_NOTHING; + wake_up(&data->wait_queue); +} + +static void sht15_update_voltage(struct work_struct *work_s) +{ + struct sht15_data *data + = container_of(work_s, struct sht15_data, + update_supply_work); + data->supply_uV = regulator_get_voltage(data->reg); +} + +/** + * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg + * @nb: associated notification structure + * @event: voltage regulator state change event code + * @ignored: function parameter - ignored here + * + * Note that as the notification code holds the regulator lock, we have + * to schedule an update of the supply voltage rather than getting it directly. + **/ +static int sht15_invalidate_voltage(struct notifier_block *nb, + unsigned long event, + void *ignored) +{ + struct sht15_data *data = container_of(nb, struct sht15_data, nb); + + if (event == REGULATOR_EVENT_VOLTAGE_CHANGE) + data->supply_uV_valid = false; + schedule_work(&data->update_supply_work); + + return NOTIFY_OK; +} + +static int __devinit sht15_probe(struct platform_device *pdev) +{ + int ret = 0; + struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL); + + if (!data) { + ret = -ENOMEM; + dev_err(&pdev->dev, "kzalloc failed"); + goto error_ret; + } + + INIT_WORK(&data->read_work, sht15_bh_read_data); + INIT_WORK(&data->update_supply_work, sht15_update_voltage); + platform_set_drvdata(pdev, data); + mutex_init(&data->read_lock); + data->dev = &pdev->dev; + init_waitqueue_head(&data->wait_queue); + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "no platform data supplied"); + goto err_free_data; + } + data->pdata = pdev->dev.platform_data; + data->supply_uV = data->pdata->supply_mv*1000; + +/* If a regulator is available, query what the supply voltage actually is!*/ + data->reg = regulator_get(data->dev, "vcc"); + if (!IS_ERR(data->reg)) { + data->supply_uV = regulator_get_voltage(data->reg); + regulator_enable(data->reg); + /* setup a notifier block to update this if another device + * causes the voltage to change */ + data->nb.notifier_call = &sht15_invalidate_voltage; + ret = regulator_register_notifier(data->reg, &data->nb); + } +/* Try requesting the GPIOs */ + ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck"); + if (ret) { + dev_err(&pdev->dev, "gpio request failed"); + goto err_free_data; + } + gpio_direction_output(data->pdata->gpio_sck, 0); + ret = gpio_request(data->pdata->gpio_data, "SHT15 data"); + if (ret) { + dev_err(&pdev->dev, "gpio request failed"); + goto err_release_gpio_sck; + } + ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group); + if (ret) { + dev_err(&pdev->dev, "sysfs create failed"); + goto err_free_data; + } + + ret = request_irq(gpio_to_irq(data->pdata->gpio_data), + sht15_interrupt_fired, + IRQF_TRIGGER_FALLING, + "sht15 data", + data); + if (ret) { + dev_err(&pdev->dev, "failed to get irq for data line"); + goto err_release_gpio_data; + } + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); + sht15_connection_reset(data); + sht15_send_cmd(data, 0x1E); + + data->hwmon_dev = hwmon_device_register(data->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto err_release_gpio_data; + } + return 0; + +err_release_gpio_data: + gpio_free(data->pdata->gpio_data); +err_release_gpio_sck: + gpio_free(data->pdata->gpio_sck); +err_free_data: + kfree(data); +error_ret: + + return ret; +} + +static int __devexit sht15_remove(struct platform_device *pdev) +{ + struct sht15_data *data = platform_get_drvdata(pdev); + + /* Make sure any reads from the device are done and + * prevent new ones beginnning */ + mutex_lock(&data->read_lock); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group); + if (!IS_ERR(data->reg)) { + regulator_unregister_notifier(data->reg, &data->nb); + regulator_disable(data->reg); + regulator_put(data->reg); + } + + free_irq(gpio_to_irq(data->pdata->gpio_data), data); + gpio_free(data->pdata->gpio_data); + gpio_free(data->pdata->gpio_sck); + mutex_unlock(&data->read_lock); + kfree(data); + return 0; +} + + +static struct platform_driver sht_drivers[] = { + { + .driver = { + .name = "sht10", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht11", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht15", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht71", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht75", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, +}; + + +static int __init sht15_init(void) +{ + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) { + ret = platform_driver_register(&sht_drivers[i]); + if (ret) + goto error_unreg; + } + + return 0; + +error_unreg: + while (--i >= 0) + platform_driver_unregister(&sht_drivers[i]); + + return ret; +} +module_init(sht15_init); + +static void __exit sht15_exit(void) +{ + int i; + for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--) + platform_driver_unregister(&sht_drivers[i]); +} +module_exit(sht15_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/sht15.h b/include/linux/sht15.h new file mode 100644 index 000000000000..046bce05ecab --- /dev/null +++ b/include/linux/sht15.h @@ -0,0 +1,24 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is connected + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if available. + **/ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; +}; + -- cgit From 17a5138d204014b00cb9c1d6e8ff311993041b5c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 13 Apr 2009 14:39:47 -0700 Subject: aio: remove INIT_KIOCTX Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka "[PATCH] aio: remove kioctx from mm_struct". Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index dcfb93337e9a..d87247d2641f 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -15,19 +15,6 @@ extern struct files_struct init_files; extern struct fs_struct init_fs; -#define INIT_KIOCTX(name, which_mm) \ -{ \ - .users = ATOMIC_INIT(1), \ - .dead = 0, \ - .mm = &which_mm, \ - .user_id = 0, \ - .next = NULL, \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \ - .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \ - .reqs_active = 0U, \ - .max_reqs = ~0U, \ -} - #define INIT_MM(name) \ { \ .mm_rb = RB_ROOT, \ -- cgit From 5dec8bfbdd4921522565a7b0e0c8760ae042ef6d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 13 Apr 2009 14:39:54 -0700 Subject: include/linux/fiemap.h: include types.h now that it's exported Include in fiemap.h. Sam Ravnborg pointed out that this was missing in this newly-exported header which uses the __u32 and __u64 types. Signed-off-by: Eric Sandeen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fiemap.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h index 671decbd2aeb..934e22d65801 100644 --- a/include/linux/fiemap.h +++ b/include/linux/fiemap.h @@ -11,6 +11,8 @@ #ifndef _LINUX_FIEMAP_H #define _LINUX_FIEMAP_H +#include + struct fiemap_extent { __u64 fe_logical; /* logical offset in bytes for the start of * the extent from the beginning of the file */ -- cgit From 347486bb108fa6e0fd2753c1be3519d6be2516ed Mon Sep 17 00:00:00 2001 From: Stefan Husemann Date: Mon, 13 Apr 2009 14:40:10 -0700 Subject: intelfb: support i854 Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard Cc: Dave Airlie Cc: Krzysztof Helt Signed-off-by: Stefan Husemann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/agp/intel-agp.c | 3 +++ drivers/video/intelfb/intelfb.h | 2 ++ drivers/video/intelfb/intelfb_i2c.c | 1 + drivers/video/intelfb/intelfbdrv.c | 1 + drivers/video/intelfb/intelfbhw.c | 5 +++++ include/drm/drm_pciids.h | 2 ++ include/linux/pci_ids.h | 2 ++ 7 files changed, 16 insertions(+) (limited to 'include/linux') diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9d9490e22e07..3686912427ba 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -2131,6 +2131,8 @@ static const struct intel_driver_description { { PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M", &intel_845_driver, &intel_830_driver }, { PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL }, + { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854", + &intel_845_driver, &intel_830_driver }, { PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL }, { PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM", &intel_845_driver, &intel_830_driver }, @@ -2355,6 +2357,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82845_HB), ID(PCI_DEVICE_ID_INTEL_82845G_HB), ID(PCI_DEVICE_ID_INTEL_82850_HB), + ID(PCI_DEVICE_ID_INTEL_82854_HB), ID(PCI_DEVICE_ID_INTEL_82855PM_HB), ID(PCI_DEVICE_ID_INTEL_82855GM_HB), ID(PCI_DEVICE_ID_INTEL_82860_HB), diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h index a50bea614804..40984551c927 100644 --- a/drivers/video/intelfb/intelfb.h +++ b/drivers/video/intelfb/intelfb.h @@ -53,6 +53,7 @@ #define PCI_DEVICE_ID_INTEL_830M 0x3577 #define PCI_DEVICE_ID_INTEL_845G 0x2562 #define PCI_DEVICE_ID_INTEL_85XGM 0x3582 +#define PCI_DEVICE_ID_INTEL_854 0x358E #define PCI_DEVICE_ID_INTEL_865G 0x2572 #define PCI_DEVICE_ID_INTEL_915G 0x2582 #define PCI_DEVICE_ID_INTEL_915GM 0x2592 @@ -154,6 +155,7 @@ enum intel_chips { INTEL_85XGM, INTEL_852GM, INTEL_852GME, + INTEL_854, INTEL_855GM, INTEL_855GME, INTEL_865G, diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index b3065492bb20..487f2be47460 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -156,6 +156,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) switch(dinfo->chipset) { case INTEL_830M: case INTEL_845G: + case INTEL_854: case INTEL_855GM: case INTEL_865G: dinfo->output[i].type = INTELFB_OUTPUT_DVO; diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 6d8e5415c809..ace14fe02fc4 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -182,6 +182,7 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G }, diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index 8b26b27c2db6..0689f97c5238 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -84,6 +84,11 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo) dinfo->mobile = 0; dinfo->pll_index = PLLS_I8xx; return 0; + case PCI_DEVICE_ID_INTEL_854: + dinfo->mobile = 1; + dinfo->name = "Intel(R) 854"; + dinfo->chipset = INTEL_854; + return 0; case PCI_DEVICE_ID_INTEL_85XGM: tmp = 0; dinfo->mobile = 1; diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 2df74eb09563..9477af01a639 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -472,6 +472,7 @@ {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} #define gamma_PCI_IDS \ @@ -533,4 +534,5 @@ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0, 0, 0} diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd570885..06ba90c211a5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2514,6 +2514,8 @@ #define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 +#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c +#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 #define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 #define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -- cgit From 27b19565fe4ca5b0e9d2ae98ce4b81ca728bf445 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 14 Apr 2009 11:03:12 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint, fix Impact: build fix for Sparc and s390 Stephen Rothwell reported that the Sparc build broke: In file included from kernel/panic.c:12: include/linux/debug_locks.h: In function '__debug_locks_off': include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg' due to: 9eeba61: lockdep: warn about lockdep disabling after kernel taint There is some inconsistency between architectures about where exactly xchg() is defined. The traditional place is in system.h but the more logical point for it is in atomic.h - where most architectures (especially new ones) have it defined. These architecture also still offer it via system.h. Some, such as Sparc or s390 only have it in asm/system.h and not available via asm/atomic.h at all. Use the widest set of headers in debug_locks.h and also include asm/system.h. Reported-by: Stephen Rothwell Cc: Frederic Weisbecker Cc: "David S. Miller" Cc: Linus Torvalds LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 493dedb7a67b..29b3ce3f2a1d 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,6 +3,7 @@ #include #include +#include struct task_struct; -- cgit From ef631b0ca01655d24e9ca7e199262c4a46416a26 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 Apr 2009 21:31:16 -0700 Subject: rcu: Make hierarchical RCU less IPI-happy This patch fixes a hierarchical-RCU performance bug located by Anton Blanchard. The problem stems from a misguided attempt to provide a work-around for jiffies-counter failure. This work-around uses a per-CPU n_rcu_pending counter, which is incremented on each call to rcu_pending(), which in turn is called from each scheduling-clock interrupt. Each CPU then treats this counter as a surrogate for the jiffies counter, so that if the jiffies counter fails to advance, the per-CPU n_rcu_pending counter will cause RCU to invoke force_quiescent_state(), which in turn will (among other things) send resched IPIs to CPUs that have thus far failed to pass through an RCU quiescent state. Unfortunately, each CPU resets only its own counter after sending a batch of IPIs. This means that the other CPUs will also (needlessly) send -another- round of IPIs, for a full N-squared set of IPIs in the worst case every three scheduler-clock ticks until the grace period finally ends. It is not reasonable for a given CPU to reset each and every n_rcu_pending for all the other CPUs, so this patch instead simply disables the jiffies-counter "training wheels", thus eliminating the excessive IPIs. Note that the jiffies-counter IPIs do not have this problem due to the fact that the jiffies counter is global, so that the CPU sending the IPIs can easily reset things, thus preventing the other CPUs from sending redundant IPIs. Note also that the n_rcu_pending counter remains, as it will continue to be used for tracing. It may also see use to update the jiffies counter, should an appropriate kick-the-jiffies-counter API appear. Located-by: Anton Blanchard Tested-by: Anton Blanchard Signed-off-by: Paul E. McKenney Cc: anton@samba.org Cc: akpm@linux-foundation.org Cc: dipankar@in.ibm.com Cc: manfred@colorfullife.com Cc: cl@linux-foundation.org Cc: josht@linux.vnet.ibm.com Cc: schamp@sgi.com Cc: niv@us.ibm.com Cc: dvhltc@us.ibm.com Cc: ego@in.ibm.com Cc: laijs@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: peterz@infradead.org Cc: penberg@cs.helsinki.fi Cc: andi@firstfloor.org Cc: "Paul E. McKenney" LKML-Reference: <12396834793575-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/rcutree.h | 3 +-- kernel/rcutree.c | 19 ++++--------------- kernel/rcutree_trace.c | 14 +++++--------- 3 files changed, 10 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 0cdda00f2b2a..58b2aa5312b9 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -161,9 +161,8 @@ struct rcu_data { unsigned long offline_fqs; /* Kicked due to being offline. */ unsigned long resched_ipi; /* Sent a resched IPI. */ - /* 5) state to allow this CPU to force_quiescent_state on others */ + /* 5) For future __rcu_pending statistics. */ long n_rcu_pending; /* rcu_pending() calls since boot. */ - long n_rcu_pending_force_qs; /* when to force quiescent states. */ int cpu; }; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 7f3266922572..d2a372fb0b9b 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -530,8 +530,6 @@ static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp) rdp->qs_pending = 1; rdp->passed_quiesc = 0; rdp->gpnum = rsp->gpnum; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; } /* @@ -578,8 +576,6 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) rsp->gpnum++; rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */ rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; record_gp_stall_check_time(rsp); dyntick_record_completed(rsp, rsp->completed - 1); note_new_gpnum(rsp, rdp); @@ -1055,7 +1051,6 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) { unsigned long flags; long lastcomp; - struct rcu_data *rdp = rsp->rda[smp_processor_id()]; struct rcu_node *rnp = rcu_get_root(rsp); u8 signaled; @@ -1066,16 +1061,13 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) return; /* Someone else is already on the job. */ } if (relaxed && - (long)(rsp->jiffies_force_qs - jiffies) >= 0 && - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0) + (long)(rsp->jiffies_force_qs - jiffies) >= 0) goto unlock_ret; /* no emergency and done recently. */ rsp->n_force_qs++; spin_lock(&rnp->lock); lastcomp = rsp->completed; signaled = rsp->signaled; rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; if (lastcomp == rsp->gpnum) { rsp->n_force_qs_ngp++; spin_unlock(&rnp->lock); @@ -1144,8 +1136,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs. */ - if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); /* @@ -1230,8 +1221,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), if (unlikely(++rdp->qlen > qhimark)) { rdp->blimit = LONG_MAX; force_quiescent_state(rsp, 0); - } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); } @@ -1290,8 +1280,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp) /* Has an RCU GP gone long enough to send resched IPIs &c? */ if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) && - ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)) + ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) return 1; /* nothing to do */ diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 4ee954f6a8d5..4b1875ba9404 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -49,14 +49,12 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x", + seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? '!' : ' ', rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - (int)(rdp->n_rcu_pending & 0xffff)); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, " dt=%d/%d dn=%d df=%lu", rdp->dynticks->dynticks, @@ -102,14 +100,12 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld", + seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"", rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - rdp->n_rcu_pending); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, ",%d,%d,%d,%lu", rdp->dynticks->dynticks, @@ -123,7 +119,7 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) static int show_rcudata_csv(struct seq_file *m, void *unused) { - seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\","); + seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\","); #ifdef CONFIG_NO_HZ seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ -- cgit From 78c5b82ee68207a176ad5ca5eabdb2dbe5cfbfd3 Mon Sep 17 00:00:00 2001 From: Leandro Dorileo Date: Tue, 14 Apr 2009 14:59:51 +0100 Subject: tty: Update some of the USB kernel doc Updates some usb_serial_port members documentation. Signed-off-by: Leandro Dorileo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/usb/serial.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b95842542590..625e9e4639c6 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -29,7 +29,7 @@ /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. + * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @mutex: mutex used to synchronize serial_open() and serial_close() * access for this port. @@ -44,19 +44,22 @@ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us + * @console: attached usb serial console + * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. -- cgit From 8f3d8ba20e67991b531e9c0227dcd1f99271a32c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 19:55:13 +0200 Subject: block: move bio list helpers into bio.h It's used by DM and MD and generally useful, so move the bio list helpers into bio.h. Signed-off-by: Christoph Hellwig Acked-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- drivers/md/dm-bio-list.h | 117 -------------------------------------------- drivers/md/dm-delay.c | 2 - drivers/md/dm-mpath.c | 1 - drivers/md/dm-raid1.c | 1 - drivers/md/dm-region-hash.c | 1 - drivers/md/dm-snap.c | 1 - drivers/md/dm.c | 1 - drivers/md/raid1.c | 1 - drivers/md/raid10.c | 1 - include/linux/bio.h | 109 +++++++++++++++++++++++++++++++++++++++++ 10 files changed, 109 insertions(+), 126 deletions(-) delete mode 100644 drivers/md/dm-bio-list.h (limited to 'include/linux') diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h deleted file mode 100644 index 345098b4ca77..000000000000 --- a/drivers/md/dm-bio-list.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat UK Ltd. - * - * This file is released under the GPL. - */ - -#ifndef DM_BIO_LIST_H -#define DM_BIO_LIST_H - -#include - -#ifdef CONFIG_BLOCK - -struct bio_list { - struct bio *head; - struct bio *tail; -}; - -static inline int bio_list_empty(const struct bio_list *bl) -{ - return bl->head == NULL; -} - -static inline void bio_list_init(struct bio_list *bl) -{ - bl->head = bl->tail = NULL; -} - -#define bio_list_for_each(bio, bl) \ - for (bio = (bl)->head; bio; bio = bio->bi_next) - -static inline unsigned bio_list_size(const struct bio_list *bl) -{ - unsigned sz = 0; - struct bio *bio; - - bio_list_for_each(bio, bl) - sz++; - - return sz; -} - -static inline void bio_list_add(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = NULL; - - if (bl->tail) - bl->tail->bi_next = bio; - else - bl->head = bio; - - bl->tail = bio; -} - -static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = bl->head; - - bl->head = bio; - - if (!bl->tail) - bl->tail = bio; -} - -static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->tail) - bl->tail->bi_next = bl2->head; - else - bl->head = bl2->head; - - bl->tail = bl2->tail; -} - -static inline void bio_list_merge_head(struct bio_list *bl, - struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->head) - bl2->tail->bi_next = bl->head; - else - bl->tail = bl2->tail; - - bl->head = bl2->head; -} - -static inline struct bio *bio_list_pop(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - if (bio) { - bl->head = bl->head->bi_next; - if (!bl->head) - bl->tail = NULL; - - bio->bi_next = NULL; - } - - return bio; -} - -static inline struct bio *bio_list_get(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - bl->head = bl->tail = NULL; - - return bio; -} - -#endif /* CONFIG_BLOCK */ -#endif diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 59ee1b015d2d..559dbb52bc85 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -15,8 +15,6 @@ #include -#include "dm-bio-list.h" - #define DM_MSG_PREFIX "delay" struct delay_c { diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 095f77bf9681..6a386ab4f7eb 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -8,7 +8,6 @@ #include #include "dm-path-selector.h" -#include "dm-bio-list.h" #include "dm-bio-record.h" #include "dm-uevent.h" diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 536ef0bef154..076fbb4e967a 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -5,7 +5,6 @@ * This file is released under the GPL. */ -#include "dm-bio-list.h" #include "dm-bio-record.h" #include diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index 59f8d9df9e1a..7b899be0b087 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -14,7 +14,6 @@ #include #include "dm.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "region hash" diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 981a0413068f..d73f17fc7778 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -22,7 +22,6 @@ #include #include "dm-exception-store.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "snapshots" diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 8a994be035ba..424f7b048c30 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -6,7 +6,6 @@ */ #include "dm.h" -#include "dm-bio-list.h" #include "dm-uevent.h" #include diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 274b491a11c1..36df9109cde1 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -35,7 +35,6 @@ #include #include #include "md.h" -#include "dm-bio-list.h" #include "raid1.h" #include "bitmap.h" diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e293d92641ac..81a54f17417e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -22,7 +22,6 @@ #include #include #include "md.h" -#include "dm-bio-list.h" #include "raid10.h" #include "bitmap.h" diff --git a/include/linux/bio.h b/include/linux/bio.h index b900d2c67d29..b89cf2d82898 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio) return bio && bio->bi_io_vec != NULL; } +/* + * BIO list managment for use by remapping drivers (e.g. DM or MD). + * + * A bio_list anchors a singly-linked list of bios chained through the bi_next + * member of the bio. The bio_list also caches the last list member to allow + * fast access to the tail. + */ +struct bio_list { + struct bio *head; + struct bio *tail; +}; + +static inline int bio_list_empty(const struct bio_list *bl) +{ + return bl->head == NULL; +} + +static inline void bio_list_init(struct bio_list *bl) +{ + bl->head = bl->tail = NULL; +} + +#define bio_list_for_each(bio, bl) \ + for (bio = (bl)->head; bio; bio = bio->bi_next) + +static inline unsigned bio_list_size(const struct bio_list *bl) +{ + unsigned sz = 0; + struct bio *bio; + + bio_list_for_each(bio, bl) + sz++; + + return sz; +} + +static inline void bio_list_add(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = NULL; + + if (bl->tail) + bl->tail->bi_next = bio; + else + bl->head = bio; + + bl->tail = bio; +} + +static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = bl->head; + + bl->head = bio; + + if (!bl->tail) + bl->tail = bio; +} + +static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->tail) + bl->tail->bi_next = bl2->head; + else + bl->head = bl2->head; + + bl->tail = bl2->tail; +} + +static inline void bio_list_merge_head(struct bio_list *bl, + struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->head) + bl2->tail->bi_next = bl->head; + else + bl->tail = bl2->tail; + + bl->head = bl2->head; +} + +static inline struct bio *bio_list_pop(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + if (bio) { + bl->head = bl->head->bi_next; + if (!bl->head) + bl->tail = NULL; + + bio->bi_next = NULL; + } + + return bio; +} + +static inline struct bio *bio_list_get(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + bl->head = bl->tail = NULL; + + return bio; +} + #if defined(CONFIG_BLK_DEV_INTEGRITY) #define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)])) -- cgit From 48e70bc18ac81881dedd3aa327c55b924fc41ecf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Apr 2009 08:19:27 +0200 Subject: Document and move the various READ/WRITE types It's a somewhat twisty maze of hints and behavioural modifiers, try and clear it up a bit with some documentation. Signed-off-by: Jens Axboe --- include/linux/fs.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 562d2855cf30..b535aec4406b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,6 +87,60 @@ struct inodes_stat_t { */ #define FMODE_NOCMTIME ((__force fmode_t)2048) +/* + * The below are the various read and write types that we support. Some of + * them include behavioral modifiers that send information down to the + * block layer and IO scheduler. Terminology: + * + * The block layer uses device plugging to defer IO a little bit, in + * the hope that we will see more IO very shortly. This increases + * coalescing of adjacent IO and thus reduces the number of IOs we + * have to send to the device. It also allows for better queuing, + * if the IO isn't mergeable. If the caller is going to be waiting + * for the IO, then he must ensure that the device is unplugged so + * that the IO is dispatched to the driver. + * + * All IO is handled async in Linux. This is fine for background + * writes, but for reads or writes that someone waits for completion + * on, we want to notify the block layer and IO scheduler so that they + * know about it. That allows them to make better scheduling + * decisions. So when the below references 'sync' and 'async', it + * is referencing this priority hint. + * + * With that in mind, the available types are: + * + * READ A normal read operation. Device will be plugged. + * READ_SYNC A synchronous read. Device is not plugged, caller can + * immediately wait on this read without caring about + * unplugging. + * READA Used for read-ahead operations. Lower priority, and the + * block layer could (in theory) choose to ignore this + * request if it runs into resource problems. + * WRITE A normal async write. Device will be plugged. + * SWRITE Like WRITE, but a special case for ll_rw_block() that + * tells it to lock the buffer first. Normally a buffer + * must be locked before doing IO. + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down + * the hint that someone will be waiting on this IO + * shortly. The device must still be unplugged explicitly, + * WRITE_SYNC_PLUG does not do this as we could be + * submitting more writes before we actually wait on any + * of them. + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device + * immediately after submission. The write equivalent + * of READ_SYNC. + * WRITE_ODIRECT Special case write for O_DIRECT only. + * SWRITE_SYNC + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer. + * See SWRITE. + * WRITE_BARRIER Like WRITE, but tells the block layer that all + * previously submitted writes must be safely on storage + * before this one is started. Also guarantees that when + * this write is complete, it itself is also safely on + * storage. Prevents reordering of writes on both sides + * of this IO. + * + */ #define RW_MASK 1 #define RWA_MASK 2 #define READ 0 @@ -102,6 +156,11 @@ struct inodes_stat_t { (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE)) #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) + +/* + * These aren't really reads or writes, they pass down information about + * parts of device that are now unused by the file system. + */ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) -- cgit From b3c2d2ddd63944ef2a1e4a43077b602288107e01 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:36 +0200 Subject: splice: split up __splice_from_pipe() Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- fs/splice.c | 217 ++++++++++++++++++++++++++++++++----------------- include/linux/splice.h | 10 +++ 2 files changed, 153 insertions(+), 74 deletions(-) (limited to 'include/linux') diff --git a/fs/splice.c b/fs/splice.c index c18aa7e03e2b..fd6b278d447b 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -601,107 +601,176 @@ out: return ret; } +static void wakeup_pipe_writers(struct pipe_inode_info *pipe) +{ + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); +} + /** - * __splice_from_pipe - splice data from a pipe to given actor + * splice_from_pipe_feed - feed available data from a pipe to a file * @pipe: pipe to splice from * @sd: information to @actor * @actor: handler that splices the data * * Description: - * This function does little more than loop over the pipe and call - * @actor to do the actual moving of a single struct pipe_buffer to - * the desired destination. See pipe_to_file, pipe_to_sendpage, or - * pipe_to_user. + + * This function loops over the pipe and calls @actor to do the + * actual moving of a single struct pipe_buffer to the desired + * destination. It returns when there's no more buffers left in + * the pipe or if the requested number of bytes (@sd->total_len) + * have been copied. It returns a positive number (one) if the + * pipe needs to be filled with more data, zero if the required + * number of bytes have been copied and -errno on error. * + * This, together with splice_from_pipe_{begin,end,next}, may be + * used to implement the functionality of __splice_from_pipe() when + * locking is required around copying the pipe buffers to the + * destination. */ -ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, - splice_actor *actor) +int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) { - int ret, do_wakeup, err; - - ret = 0; - do_wakeup = 0; - - for (;;) { - if (pipe->nrbufs) { - struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; - const struct pipe_buf_operations *ops = buf->ops; + int ret; - sd->len = buf->len; - if (sd->len > sd->total_len) - sd->len = sd->total_len; + while (pipe->nrbufs) { + struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; + const struct pipe_buf_operations *ops = buf->ops; - err = actor(pipe, buf, sd); - if (err <= 0) { - if (!ret && err != -ENODATA) - ret = err; + sd->len = buf->len; + if (sd->len > sd->total_len) + sd->len = sd->total_len; - break; - } + ret = actor(pipe, buf, sd); + if (ret <= 0) { + if (ret == -ENODATA) + ret = 0; + return ret; + } + buf->offset += ret; + buf->len -= ret; - ret += err; - buf->offset += err; - buf->len -= err; + sd->num_spliced += ret; + sd->len -= ret; + sd->pos += ret; + sd->total_len -= ret; - sd->len -= err; - sd->pos += err; - sd->total_len -= err; - if (sd->len) - continue; + if (!buf->len) { + buf->ops = NULL; + ops->release(pipe, buf); + pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); + pipe->nrbufs--; + if (pipe->inode) + sd->need_wakeup = true; + } - if (!buf->len) { - buf->ops = NULL; - ops->release(pipe, buf); - pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); - pipe->nrbufs--; - if (pipe->inode) - do_wakeup = 1; - } + if (!sd->total_len) + return 0; + } - if (!sd->total_len) - break; - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_feed); - if (pipe->nrbufs) - continue; +/** + * splice_from_pipe_next - wait for some data to splice from + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wait for some data and return a positive + * value (one) if pipe buffers are available. It will return zero + * or -errno if no more data needs to be spliced. + */ +int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + while (!pipe->nrbufs) { if (!pipe->writers) - break; - if (!pipe->waiting_writers) { - if (ret) - break; - } + return 0; - if (sd->flags & SPLICE_F_NONBLOCK) { - if (!ret) - ret = -EAGAIN; - break; - } + if (!pipe->waiting_writers && sd->num_spliced) + return 0; - if (signal_pending(current)) { - if (!ret) - ret = -ERESTARTSYS; - break; - } + if (sd->flags & SPLICE_F_NONBLOCK) + return -EAGAIN; - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible_sync(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - do_wakeup = 0; + if (signal_pending(current)) + return -ERESTARTSYS; + + if (sd->need_wakeup) { + wakeup_pipe_writers(pipe); + sd->need_wakeup = false; } pipe_wait(pipe); } - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_next); - return ret; +/** + * splice_from_pipe_begin - start splicing from pipe + * @pipe: pipe to splice from + * + * Description: + * This function should be called before a loop containing + * splice_from_pipe_next() and splice_from_pipe_feed() to + * initialize the necessary fields of @sd. + */ +void splice_from_pipe_begin(struct splice_desc *sd) +{ + sd->num_spliced = 0; + sd->need_wakeup = false; +} +EXPORT_SYMBOL(splice_from_pipe_begin); + +/** + * splice_from_pipe_end - finish splicing from pipe + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wake up pipe writers if necessary. It should + * be called after a loop containing splice_from_pipe_next() and + * splice_from_pipe_feed(). + */ +void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + if (sd->need_wakeup) + wakeup_pipe_writers(pipe); +} +EXPORT_SYMBOL(splice_from_pipe_end); + +/** + * __splice_from_pipe - splice data from a pipe to given actor + * @pipe: pipe to splice from + * @sd: information to @actor + * @actor: handler that splices the data + * + * Description: + * This function does little more than loop over the pipe and call + * @actor to do the actual moving of a single struct pipe_buffer to + * the desired destination. See pipe_to_file, pipe_to_sendpage, or + * pipe_to_user. + * + */ +ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) +{ + int ret; + + splice_from_pipe_begin(sd); + do { + ret = splice_from_pipe_next(pipe, sd); + if (ret > 0) + ret = splice_from_pipe_feed(pipe, sd, actor); + } while (ret > 0); + splice_from_pipe_end(pipe, sd); + + return sd->num_spliced ? sd->num_spliced : ret; } EXPORT_SYMBOL(__splice_from_pipe); diff --git a/include/linux/splice.h b/include/linux/splice.h index 528dcb93c2f2..8fc2a635586e 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -36,6 +36,8 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + size_t num_spliced; /* number of bytes already spliced */ + bool need_wakeup; /* need to wake up writer */ }; struct partial_page { @@ -66,6 +68,14 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, splice_actor *); extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct splice_desc *, splice_actor *); +extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *, + splice_actor *); +extern int splice_from_pipe_next(struct pipe_inode_info *, + struct splice_desc *); +extern void splice_from_pipe_begin(struct splice_desc *); +extern void splice_from_pipe_end(struct pipe_inode_info *, + struct splice_desc *); + extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, -- cgit From 328eaaba4e41a04c1dc4679d65bea3fee4349d86 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:39 +0200 Subject: ocfs2: fix i_mutex locking in ocfs2_splice_to_file() Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- fs/ocfs2/file.c | 94 +++++++++++++++++++++++++++++++++++++++----------- fs/splice.c | 5 +-- include/linux/splice.h | 2 ++ 3 files changed, 79 insertions(+), 22 deletions(-) (limited to 'include/linux') diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8672b9536039..c2a87c885b73 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1912,6 +1912,22 @@ out_sems: return written ? written : ret; } +static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, + struct file *out, + struct splice_desc *sd) +{ + int ret; + + ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, + sd->total_len, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + return ret; + } + + return splice_from_pipe_feed(pipe, sd, pipe_to_file); +} + static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, @@ -1919,38 +1935,76 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, unsigned int flags) { int ret; - struct inode *inode = out->f_path.dentry->d_inode; + struct address_space *mapping = out->f_mapping; + struct inode *inode = mapping->host; + struct splice_desc sd = { + .total_len = len, + .flags = flags, + .pos = *ppos, + .u.file = out, + }; mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, (unsigned int)len, out->f_path.dentry->d_name.len, out->f_path.dentry->d_name.name); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); - ret = ocfs2_rw_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out; - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0, - NULL); - if (ret < 0) { - mlog_errno(ret); - goto out_unlock; - } + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = ocfs2_rw_lock(inode, 1); + if (ret < 0) + mlog_errno(ret); + else { + ret = ocfs2_splice_to_file(pipe, out, &sd); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); -out_unlock: - ocfs2_rw_unlock(inode, 1); -out: - mutex_unlock(&inode->i_mutex); + if (sd.num_spliced) + ret = sd.num_spliced; + + if (ret > 0) { + unsigned long nr_pages; + + *ppos += ret; + nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + + /* + * If file or inode is SYNC and we actually wrote some data, + * sync it. + */ + if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { + int err; + + mutex_lock(&inode->i_mutex); + err = ocfs2_rw_lock(inode, 1); + if (err < 0) { + mlog_errno(err); + } else { + err = generic_osync_inode(inode, mapping, + OSYNC_METADATA|OSYNC_DATA); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + + if (err) + ret = err; + } + balance_dirty_pages_ratelimited_nr(mapping, nr_pages); + } mlog_exit(ret); return ret; diff --git a/fs/splice.c b/fs/splice.c index a1f595b9db40..584b2b7a1dbe 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -555,8 +555,8 @@ static int pipe_to_sendpage(struct pipe_inode_info *pipe, * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create * a new page in the output file page cache and fill/dirty that. */ -static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, - struct splice_desc *sd) +int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) { struct file *file = sd->u.file; struct address_space *mapping = file->f_mapping; @@ -600,6 +600,7 @@ static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, out: return ret; } +EXPORT_SYMBOL(pipe_to_file); static void wakeup_pipe_writers(struct pipe_inode_info *pipe) { diff --git a/include/linux/splice.h b/include/linux/splice.h index 8fc2a635586e..5f3faa9d15ae 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -75,6 +75,8 @@ extern int splice_from_pipe_next(struct pipe_inode_info *, extern void splice_from_pipe_begin(struct splice_desc *); extern void splice_from_pipe_end(struct pipe_inode_info *, struct splice_desc *); +extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); -- cgit From f8cc774ce4844811a55e2352f1443055e3994e28 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:40 +0200 Subject: splice: remove generic_file_splice_write_nolock() Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- fs/splice.c | 59 ------------------------------------------------------ include/linux/fs.h | 2 -- 2 files changed, 61 deletions(-) (limited to 'include/linux') diff --git a/fs/splice.c b/fs/splice.c index 584b2b7a1dbe..128ee36a719b 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -810,65 +810,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, return ret; } -/** - * generic_file_splice_write_nolock - generic_file_splice_write without mutexes - * @pipe: pipe info - * @out: file to write to - * @ppos: position in @out - * @len: number of bytes to splice - * @flags: splice modifier flags - * - * Description: - * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. The caller is responsible - * for acquiring i_mutex on both inodes. - * - */ -ssize_t -generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) -{ - struct address_space *mapping = out->f_mapping; - struct inode *inode = mapping->host; - struct splice_desc sd = { - .total_len = len, - .flags = flags, - .pos = *ppos, - .u.file = out, - }; - ssize_t ret; - int err; - - err = file_remove_suid(out); - if (unlikely(err)) - return err; - - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (ret > 0) { - unsigned long nr_pages; - - *ppos += ret; - nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; - - /* - * If file or inode is SYNC and we actually wrote some data, - * sync it. - */ - if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { - err = generic_osync_inode(inode, mapping, - OSYNC_METADATA|OSYNC_DATA); - - if (err) - ret = err; - } - balance_dirty_pages_ratelimited_nr(mapping, nr_pages); - } - - return ret; -} - -EXPORT_SYMBOL(generic_file_splice_write_nolock); - /** * generic_file_splice_write - splice data from a pipe to a file * @pipe: pipe info diff --git a/include/linux/fs.h b/include/linux/fs.h index b535aec4406b..907d8f56c6fa 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2209,8 +2209,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); -extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *, - struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, -- cgit From 61e0d47c33cc371f725bcda4a47ae0efe652dba8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:41 +0200 Subject: splice: add helpers for locking pipe inode There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- fs/inode.c | 36 ---------------------------------- fs/pipe.c | 42 +++++++++++++++++++++++++++++++++++---- fs/splice.c | 50 ++++++++++++++++++++--------------------------- include/linux/fs.h | 3 --- include/linux/pipe_fs_i.h | 5 +++++ 5 files changed, 64 insertions(+), 72 deletions(-) (limited to 'include/linux') diff --git a/fs/inode.c b/fs/inode.c index d06d6d268de9..6ad14a1cd8c9 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1470,42 +1470,6 @@ static void __wait_on_freeing_inode(struct inode *inode) spin_lock(&inode_lock); } -/* - * We rarely want to lock two inodes that do not have a parent/child - * relationship (such as directory, child inode) simultaneously. The - * vast majority of file systems should be able to get along fine - * without this. Do not use these functions except as a last resort. - */ -void inode_double_lock(struct inode *inode1, struct inode *inode2) -{ - if (inode1 == NULL || inode2 == NULL || inode1 == inode2) { - if (inode1) - mutex_lock(&inode1->i_mutex); - else if (inode2) - mutex_lock(&inode2->i_mutex); - return; - } - - if (inode1 < inode2) { - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD); - } else { - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD); - } -} -EXPORT_SYMBOL(inode_double_lock); - -void inode_double_unlock(struct inode *inode1, struct inode *inode2) -{ - if (inode1) - mutex_unlock(&inode1->i_mutex); - - if (inode2 && inode2 != inode1) - mutex_unlock(&inode2->i_mutex); -} -EXPORT_SYMBOL(inode_double_unlock); - static __initdata unsigned long ihash_entries; static int __init set_ihash_entries(char *str) { diff --git a/fs/pipe.c b/fs/pipe.c index 4af7aa521813..13414ec45b8d 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -37,6 +37,42 @@ * -- Manfred Spraul 2002-05-09 */ +static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass) +{ + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, subclass); +} + +void pipe_lock(struct pipe_inode_info *pipe) +{ + /* + * pipe_lock() nests non-pipe inode locks (for writing to a file) + */ + pipe_lock_nested(pipe, I_MUTEX_PARENT); +} +EXPORT_SYMBOL(pipe_lock); + +void pipe_unlock(struct pipe_inode_info *pipe) +{ + if (pipe->inode) + mutex_unlock(&pipe->inode->i_mutex); +} +EXPORT_SYMBOL(pipe_unlock); + +void pipe_double_lock(struct pipe_inode_info *pipe1, + struct pipe_inode_info *pipe2) +{ + BUG_ON(pipe1 == pipe2); + + if (pipe1 < pipe2) { + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + } else { + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + } +} + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe) { @@ -47,12 +83,10 @@ void pipe_wait(struct pipe_inode_info *pipe) * is considered a noninteractive wait: */ prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); schedule(); finish_wait(&pipe->wait, &wait); - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); } static int diff --git a/fs/splice.c b/fs/splice.c index 128ee36a719b..5384a90665d0 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -182,8 +182,7 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, do_wakeup = 0; page_nr = 0; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); for (;;) { if (!pipe->readers) { @@ -245,15 +244,13 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, pipe->waiting_writers--; } - if (pipe->inode) { - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); - } + if (do_wakeup) { + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } while (page_nr < spd_pages) @@ -801,11 +798,9 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); ret = __splice_from_pipe(pipe, &sd, actor); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -837,8 +832,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, }; ssize_t ret; - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); + pipe_lock(pipe); splice_from_pipe_begin(&sd); do { @@ -854,8 +848,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, } while (ret > 0); splice_from_pipe_end(pipe, &sd); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (sd.num_spliced) ret = sd.num_spliced; @@ -1348,8 +1341,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, if (!pipe) return -EBADF; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); error = ret = 0; while (nr_segs) { @@ -1404,8 +1396,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, iov++; } - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (!ret) ret = error; @@ -1533,7 +1524,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (!pipe->nrbufs) { if (signal_pending(current)) { @@ -1551,7 +1542,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe_wait(pipe); } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1571,7 +1562,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (pipe->nrbufs >= PIPE_BUFFERS) { if (!pipe->readers) { @@ -1592,7 +1583,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe->waiting_writers--; } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1608,10 +1599,10 @@ static int link_pipe(struct pipe_inode_info *ipipe, /* * Potential ABBA deadlock, work around it by ordering lock - * grabbing by inode address. Otherwise two different processes + * grabbing by pipe info address. Otherwise two different processes * could deadlock (one doing tee from A -> B, the other from B -> A). */ - inode_double_lock(ipipe->inode, opipe->inode); + pipe_double_lock(ipipe, opipe); do { if (!opipe->readers) { @@ -1662,7 +1653,8 @@ static int link_pipe(struct pipe_inode_info *ipipe, if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK)) ret = -EAGAIN; - inode_double_unlock(ipipe->inode, opipe->inode); + pipe_unlock(ipipe); + pipe_unlock(opipe); /* * If we put data in the output pipe, wakeup any potential readers. diff --git a/include/linux/fs.h b/include/linux/fs.h index 907d8f56c6fa..e766be0d4329 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -797,9 +797,6 @@ enum inode_i_mutex_lock_class I_MUTEX_QUOTA }; -extern void inode_double_lock(struct inode *inode1, struct inode *inode2); -extern void inode_double_unlock(struct inode *inode1, struct inode *inode2); - /* * NOTE: in a 32bit arch with a preemptable kernel and * an UP compile the i_size_read/write must be atomic diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 8e4120285f72..c8f038554e80 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -134,6 +134,11 @@ struct pipe_buf_operations { memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE +/* Pipe lock and unlock operations */ +void pipe_lock(struct pipe_inode_info *); +void pipe_unlock(struct pipe_inode_info *); +void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe); -- cgit From 35c80d5f400f68f2eccf3069d1c068e154bde9c9 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 15 Apr 2009 13:22:38 -0400 Subject: Add block_write_full_page_endio for passing endio handler block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by: Chris Mason Acked-by: Theodore Tso Acked-by: Jan Kara Signed-off-by: Linus Torvalds --- fs/buffer.c | 45 ++++++++++++++++++++++++++++++++++----------- include/linux/buffer_head.h | 3 +++ 2 files changed, 37 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/fs/buffer.c b/fs/buffer.c index ff8bb1f2333a..b3e5be7514f5 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -360,7 +360,7 @@ still_busy: * Completion handler for block_write_full_page() - pages which are unlocked * during I/O, and which have PageWriteback cleared upon I/O completion. */ -static void end_buffer_async_write(struct buffer_head *bh, int uptodate) +void end_buffer_async_write(struct buffer_head *bh, int uptodate) { char b[BDEVNAME_SIZE]; unsigned long flags; @@ -438,11 +438,17 @@ static void mark_buffer_async_read(struct buffer_head *bh) set_buffer_async_read(bh); } -void mark_buffer_async_write(struct buffer_head *bh) +void mark_buffer_async_write_endio(struct buffer_head *bh, + bh_end_io_t *handler) { - bh->b_end_io = end_buffer_async_write; + bh->b_end_io = handler; set_buffer_async_write(bh); } + +void mark_buffer_async_write(struct buffer_head *bh) +{ + mark_buffer_async_write_endio(bh, end_buffer_async_write); +} EXPORT_SYMBOL(mark_buffer_async_write); @@ -1615,7 +1621,8 @@ EXPORT_SYMBOL(unmap_underlying_metadata); * unplugging the device queue. */ static int __block_write_full_page(struct inode *inode, struct page *page, - get_block_t *get_block, struct writeback_control *wbc) + get_block_t *get_block, struct writeback_control *wbc, + bh_end_io_t *handler) { int err; sector_t block; @@ -1700,7 +1707,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page, continue; } if (test_clear_buffer_dirty(bh)) { - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { unlock_buffer(bh); } @@ -1753,7 +1760,7 @@ recover: if (buffer_mapped(bh) && buffer_dirty(bh) && !buffer_delay(bh)) { lock_buffer(bh); - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { /* * The buffer may have been set dirty during @@ -2679,7 +2686,8 @@ int nobh_writepage(struct page *page, get_block_t *get_block, out: ret = mpage_writepage(page, get_block, wbc); if (ret == -EAGAIN) - ret = __block_write_full_page(inode, page, get_block, wbc); + ret = __block_write_full_page(inode, page, get_block, wbc, + end_buffer_async_write); return ret; } EXPORT_SYMBOL(nobh_writepage); @@ -2837,9 +2845,10 @@ out: /* * The generic ->writepage function for buffer-backed address_spaces + * this form passes in the end_io handler used to finish the IO. */ -int block_write_full_page(struct page *page, get_block_t *get_block, - struct writeback_control *wbc) +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler) { struct inode * const inode = page->mapping->host; loff_t i_size = i_size_read(inode); @@ -2848,7 +2857,8 @@ int block_write_full_page(struct page *page, get_block_t *get_block, /* Is the page fully inside i_size? */ if (page->index < end_index) - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, + handler); /* Is the page fully outside i_size? (truncate in progress) */ offset = i_size & (PAGE_CACHE_SIZE-1); @@ -2871,9 +2881,20 @@ int block_write_full_page(struct page *page, get_block_t *get_block, * writes to that region are not written out to the file." */ zero_user_segment(page, offset, PAGE_CACHE_SIZE); - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, handler); } +/* + * The generic ->writepage function for buffer-backed address_spaces + */ +int block_write_full_page(struct page *page, get_block_t *get_block, + struct writeback_control *wbc) +{ + return block_write_full_page_endio(page, get_block, wbc, + end_buffer_async_write); +} + + sector_t generic_block_bmap(struct address_space *mapping, sector_t block, get_block_t *get_block) { @@ -3342,9 +3363,11 @@ EXPORT_SYMBOL(block_read_full_page); EXPORT_SYMBOL(block_sync_page); EXPORT_SYMBOL(block_truncate_page); EXPORT_SYMBOL(block_write_full_page); +EXPORT_SYMBOL(block_write_full_page_endio); EXPORT_SYMBOL(cont_write_begin); EXPORT_SYMBOL(end_buffer_read_sync); EXPORT_SYMBOL(end_buffer_write_sync); +EXPORT_SYMBOL(end_buffer_async_write); EXPORT_SYMBOL(file_fsync); EXPORT_SYMBOL(generic_block_bmap); EXPORT_SYMBOL(generic_cont_expand_simple); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 7b73bb8f1970..16ed0284d780 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long, unsigned long b_state); void end_buffer_read_sync(struct buffer_head *bh, int uptodate); void end_buffer_write_sync(struct buffer_head *bh, int uptodate); +void end_buffer_async_write(struct buffer_head *bh, int uptodate); /* Things to do with buffers at mapping->private_list */ void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode); @@ -197,6 +198,8 @@ extern int buffer_heads_over_limit; void block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler); int block_read_full_page(struct page*, get_block_t*); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from); -- cgit From e3cf95dd6d352954b663d2934110d6e30af2406d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 9 Apr 2009 17:31:17 +0100 Subject: ata: Report 16/32bit PIO as best we can The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 30 ++++++++++++++++++++++++++---- drivers/ata/libata-sff.c | 27 +++++++++++++++++++++++++++ drivers/ata/pata_legacy.c | 33 ++++++++++++++++++++------------- drivers/ata/pata_ninja32.c | 4 +++- include/linux/libata.h | 8 ++++++++ 5 files changed, 84 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9747fa59e54..2733b0c90b75 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -647,23 +647,45 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) return rc; } +static int ata_ioc32(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + if (ap->pflags & ATA_PFLAG_PIO32) + return 1; + return 0; +} + int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, int cmd, void __user *arg) { int val = -EINVAL, rc = -EINVAL; + unsigned long flags; switch (cmd) { case ATA_IOC_GET_IO32: - val = 0; + spin_lock_irqsave(ap->lock, flags); + val = ata_ioc32(ap); + spin_unlock_irqrestore(ap->lock, flags); if (copy_to_user(arg, &val, 1)) return -EFAULT; return 0; case ATA_IOC_SET_IO32: val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; + rc = 0; + spin_lock_irqsave(ap->lock, flags); + if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { + if (val) + ap->pflags |= ATA_PFLAG_PIO32; + else + ap->pflags &= ~ATA_PFLAG_PIO32; + } else { + if (val != ata_ioc32(ap)) + rc = -EINVAL; + } + spin_unlock_irqrestore(ap->lock, flags); + return rc; case HDIO_GET_IDENTITY: return ata_get_identity(ap, scsidev, arg); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8332e97a9de3..bb18415d3d63 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -87,6 +87,7 @@ const struct ata_port_operations ata_bmdma32_port_ops = { .inherits = &ata_bmdma_port_ops, .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_sff_port_start32, }; EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); @@ -769,6 +770,9 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 2; int slop = buflen & 3; + + if (!(ap->pflags & ATA_PFLAG_PIO32)) + return ata_sff_data_xfer(dev, buf, buflen, rw); /* Transfer multiple of 4 bytes */ if (rw == READ) @@ -2401,6 +2405,29 @@ int ata_sff_port_start(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sff_port_start); +/** + * ata_sff_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table if the device + * is DMA capable SFF. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sff_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + if (ap->ioaddr.bmdma_addr) + return ata_port_start(ap); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_port_start32); + /** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 0c6dde80417b..6f985bed8cbb 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -108,6 +108,7 @@ struct legacy_controller { struct ata_port_operations *ops; unsigned int pio_mask; unsigned int flags; + unsigned int pflags; int (*setup)(struct platform_device *, struct legacy_probe *probe, struct legacy_data *data); }; @@ -285,7 +286,8 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, { int slop = buflen & 3; /* 32bit I/O capable *and* we need to write a whole number of dwords */ - if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { struct ata_port *ap = dev->link->ap; unsigned long flags; @@ -736,7 +738,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else @@ -858,27 +861,30 @@ static struct ata_port_operations winbond_port_ops = { static struct legacy_controller controllers[] = { {"BIOS", &legacy_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"Snooping", &simple_port_ops, 0x1F, - 0 , NULL }, + 0, 0, NULL }, {"PDC20230", &pdc20230_port_ops, 0x7, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, NULL }, {"HT6560A", &ht6560a_port_ops, 0x07, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"HT6560B", &ht6560b_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, - ATA_FLAG_NO_IORDY, qdi_port }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"W83759A", &winbond_port_ops, 0x1F, - 0 , winbond_port } + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, + winbond_port } }; /** @@ -1008,6 +1014,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ap->ops = ops; ap->pio_mask = pio_modes; ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; ap->ioaddr.cmd_addr = io_addr; ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 0fb6b1b1e634..dd53a66b19e3 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.3" +#define DRV_VERSION "0.1.5" /** @@ -86,6 +86,7 @@ static struct ata_port_operations ninja32_port_ops = { .sff_dev_select = ninja32_dev_select, .cable_detect = ata_cable_40wire, .set_piomode = ninja32_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32 }; static void ninja32_program(void __iomem *base) @@ -144,6 +145,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = base + 0x1E; ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); + ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; ninja32_program(base); /* FIXME: Should we disable them at remove ? */ diff --git a/include/linux/libata.h b/include/linux/libata.h index b450a2628855..3d501db36a26 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ @@ -225,6 +226,9 @@ enum { ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -689,7 +693,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); -- cgit