From b0e1ee435aba68c4080e3cb67adf6573aa5bcc6d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Sep 2019 22:21:24 +0200 Subject: net: remove netx ethernet driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ARM netx platform got removed in 5.3, so this driver is now useless. Reported-by: Uwe Kleine-König Cc: Sascha Hauer Signed-off-by: Arnd Bergmann Signed-off-by: Jakub Kicinski --- include/linux/platform_data/eth-netx.h | 13 ------------- 1 file changed, 13 deletions(-) delete mode 100644 include/linux/platform_data/eth-netx.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h deleted file mode 100644 index a3a6322668d8..000000000000 --- a/include/linux/platform_data/eth-netx.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2005 Sascha Hauer , Pengutronix - */ - -#ifndef __ETH_NETX_H -#define __ETH_NETX_H - -struct netxeth_platform_data { - unsigned int xcno; /* number of xmac/xpec engine this eth uses */ -}; - -#endif -- cgit From cb063a83ca321fbf0cb2b4044186f241d89f3dc1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 28 Aug 2019 15:03:18 +0200 Subject: thermal: db8500: Finalize device tree conversion At some point there was an attempt to convert the DB8500 thermal sensor to device tree: a probe path was added and the device tree was augmented for the Snowball board. The switchover was never completed: instead the thermal devices came from from the PRCMU MFD device and the probe on the Snowball was confused as another set of configuration appeared from the device tree. Move over to a device-tree only approach, as we fixed up the device trees. Cc: Vincent Guittot Acked-by: Lee Jones Reviewed-by: Daniel Lezcano Signed-off-by: Linus Walleij Signed-off-by: Eduardo Valentin --- drivers/mfd/db8500-prcmu.c | 53 +--------------------------- drivers/thermal/Kconfig | 2 +- drivers/thermal/db8500_thermal.c | 30 ++++++++-------- include/linux/platform_data/db8500_thermal.h | 29 --------------- 4 files changed, 17 insertions(+), 97 deletions(-) delete mode 100644 include/linux/platform_data/db8500_thermal.h (limited to 'include/linux/platform_data') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 90e0f21bc49c..518439c79826 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -36,7 +36,6 @@ #include #include #include -#include #include "dbx500-prcmu-regs.h" /* Index of different voltages to be used when accessing AVSData */ @@ -2984,53 +2983,6 @@ static struct ux500_wdt_data db8500_wdt_pdata = { .timeout = 600, /* 10 minutes */ .has_28_bits_resolution = true, }; -/* - * Thermal Sensor - */ - -static struct resource db8500_thsens_resources[] = { - { - .name = "IRQ_HOTMON_LOW", - .start = IRQ_PRCMU_HOTMON_LOW, - .end = IRQ_PRCMU_HOTMON_LOW, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IRQ_HOTMON_HIGH", - .start = IRQ_PRCMU_HOTMON_HIGH, - .end = IRQ_PRCMU_HOTMON_HIGH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct db8500_thsens_platform_data db8500_thsens_data = { - .trip_points[0] = { - .temp = 70000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[1] = { - .temp = 75000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[2] = { - .temp = 80000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[3] = { - .temp = 85000, - .type = THERMAL_TRIP_CRITICAL, - }, - .num_trips = 4, -}; static const struct mfd_cell common_prcmu_devs[] = { { @@ -3054,10 +3006,7 @@ static const struct mfd_cell db8500_prcmu_devs[] = { }, { .name = "db8500-thermal", - .num_resources = ARRAY_SIZE(db8500_thsens_resources), - .resources = db8500_thsens_resources, - .platform_data = &db8500_thsens_data, - .pdata_size = sizeof(db8500_thsens_data), + .of_compatible = "stericsson,db8500-thermal", }, }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 9966364a6deb..001a21abcc28 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -310,7 +310,7 @@ config DOVE_THERMAL config DB8500_THERMAL tristate "DB8500 thermal management" - depends on MFD_DB8500_PRCMU + depends on MFD_DB8500_PRCMU && OF default y help Adds DB8500 thermal management implementation according to the thermal diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index b71a999d17d6..d650ae5fdf2a 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -13,13 +13,24 @@ #include #include #include -#include #include #include #include #define PRCMU_DEFAULT_MEASURE_TIME 0xFFF #define PRCMU_DEFAULT_LOW_TEMP 0 +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; struct db8500_thermal_zone { struct thermal_zone_device *therm_dev; @@ -301,7 +312,6 @@ static void db8500_thermal_work(struct work_struct *work) dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); } -#ifdef CONFIG_OF static struct db8500_thsens_platform_data* db8500_thermal_parse_dt(struct platform_device *pdev) { @@ -370,13 +380,6 @@ err_parse_dt: dev_err(&pdev->dev, "Parsing device tree data error.\n"); return NULL; } -#else -static inline struct db8500_thsens_platform_data* - db8500_thermal_parse_dt(struct platform_device *pdev) -{ - return NULL; -} -#endif static int db8500_thermal_probe(struct platform_device *pdev) { @@ -386,11 +389,10 @@ static int db8500_thermal_probe(struct platform_device *pdev) int low_irq, high_irq, ret = 0; unsigned long dft_low, dft_high; - if (np) - ptrips = db8500_thermal_parse_dt(pdev); - else - ptrips = dev_get_platdata(&pdev->dev); + if (!np) + return -EINVAL; + ptrips = db8500_thermal_parse_dt(pdev); if (!ptrips) return -EINVAL; @@ -498,13 +500,11 @@ static int db8500_thermal_resume(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id db8500_thermal_match[] = { { .compatible = "stericsson,db8500-thermal" }, {}, }; MODULE_DEVICE_TABLE(of, db8500_thermal_match); -#endif static struct platform_driver db8500_thermal_driver = { .driver = { diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h deleted file mode 100644 index 55e55750a165..000000000000 --- a/include/linux/platform_data/db8500_thermal.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * db8500_thermal.h - DB8500 Thermal Management Implementation - * - * Copyright (C) 2012 ST-Ericsson - * Copyright (C) 2012 Linaro Ltd. - * - * Author: Hongbo Zhang - */ - -#ifndef _DB8500_THERMAL_H_ -#define _DB8500_THERMAL_H_ - -#include - -#define COOLING_DEV_MAX 8 - -struct db8500_trip_point { - unsigned long temp; - enum thermal_trip_type type; - char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; -}; - -struct db8500_thsens_platform_data { - struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; - int num_trips; -}; - -#endif /* _DB8500_THERMAL_H_ */ -- cgit From bd73dfabdda280fc5f05bdec79b6721b4b2f035f Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Tue, 24 Sep 2019 09:49:18 +0000 Subject: dmaengine: imx-sdma: fix size check for sdma script_number Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.html Signed-off-by: Robin Gong Reported-by: Jurgen Lambrecht Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 8 ++++++++ include/linux/platform_data/dma-imx-sdma.h | 3 +++ 2 files changed, 11 insertions(+) (limited to 'include/linux/platform_data') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 9ba74ab7e912..c27e206a764c 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1707,6 +1707,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma, if (!sdma->script_number) sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; + if (sdma->script_number > sizeof(struct sdma_script_start_addrs) + / sizeof(s32)) { + dev_err(sdma->dev, + "SDMA script number %d not match with firmware.\n", + sdma->script_number); + return; + } + for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h index 6eaa53cef0bd..30e676b36b24 100644 --- a/include/linux/platform_data/dma-imx-sdma.h +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -51,7 +51,10 @@ struct sdma_script_start_addrs { /* End of v2 array */ s32 zcanfd_2_mcu_addr; s32 zqspi_2_mcu_addr; + s32 mcu_2_ecspi_addr; /* End of v3 array */ + s32 mcu_2_zqspi_addr; + /* End of v4 array */ }; /** -- cgit