From 98fd485795db064d0885150e2c0c7f296d8fe06e Mon Sep 17 00:00:00 2001 From: Jacob Schloss Date: Sun, 9 Dec 2012 20:18:25 -0300 Subject: [media] gspca_kinect: add Kinect for Windows USB id Add the USB ID for the Kinect for Windows RGB camera so it can be used with the gspca_kinect driver. Signed-off-by: Jacob Schloss Signed-off-by: Antonio Ospite Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/kinect.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/kinect.c b/drivers/media/usb/gspca/kinect.c index 40ad6687ee5d..3773a8a745df 100644 --- a/drivers/media/usb/gspca/kinect.c +++ b/drivers/media/usb/gspca/kinect.c @@ -381,6 +381,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x045e, 0x02ae)}, + {USB_DEVICE(0x045e, 0x02bf)}, {} }; -- cgit From 2756442e48ab5012b135b9304133d4bc0ebffb17 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 08:08:47 -0300 Subject: [media] gspca_sonixb: Properly wait between i2c writes We must wait for the previous i2c write to complete before starting a new one. Sofar we were getting away with this, but it seems that some parts of the usb-subsystem has been sped up making us go to fast :) This fixes streaming on sn9c103 based cams not working with an "i2c_w error" error. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sonixb.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 70511d5f9538..1220340e7602 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -496,7 +496,7 @@ static void reg_w(struct gspca_dev *gspca_dev, } } -static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) +static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buf) { int retry = 60; @@ -504,16 +504,19 @@ static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) return; /* is i2c ready */ - reg_w(gspca_dev, 0x08, buffer, 8); + reg_w(gspca_dev, 0x08, buf, 8); while (retry--) { if (gspca_dev->usb_err < 0) return; - msleep(10); + msleep(1); reg_r(gspca_dev, 0x08); if (gspca_dev->usb_buf[0] & 0x04) { if (gspca_dev->usb_buf[0] & 0x08) { dev_err(gspca_dev->v4l2_dev.dev, - "i2c write error\n"); + "i2c error writing %02x %02x %02x %02x" + " %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); gspca_dev->usb_err = -EIO; } return; @@ -530,7 +533,7 @@ static void i2c_w_vector(struct gspca_dev *gspca_dev, for (;;) { if (gspca_dev->usb_err < 0) return; - reg_w(gspca_dev, 0x08, *buffer, 8); + i2c_w(gspca_dev, *buffer); len -= 8; if (len <= 0) break; -- cgit From 38e91c6b1279b8ba5e798d35d5647b38f3ae66ea Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 11:17:42 -0300 Subject: [media] gspca_sonixj: Add a small delay after i2c_w1 We already have the same delay in i2c_w8, but it was missing from i2c_w1, adding this delay fixes the Microsoft VX-3000 camera often (but not always) streaming video data with a very green-ish tint. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/sonixj.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c index 5a86047b846f..36307a9028a9 100644 --- a/drivers/media/usb/gspca/sonixj.c +++ b/drivers/media/usb/gspca/sonixj.c @@ -1550,6 +1550,7 @@ static void i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) 0, gspca_dev->usb_buf, 8, 500); + msleep(2); if (ret < 0) { pr_err("i2c_w1 err %d\n", ret); gspca_dev->usb_err = ret; -- cgit From d9699088e4bfaff1778d26192756a5894c3f947b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 31 Dec 2012 08:26:33 -0300 Subject: [media] [FOR,v3.8] omap3isp: Don't include deleted OMAP plat/ header files The plat/iommu.h, plat/iovmm.h and plat/omap-pm.h have been deleted. Don't include them. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispvideo.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index 8759247cb243..b4e81cecae6f 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -34,9 +34,6 @@ #include #include #include -#include -#include -#include #include "ispvideo.h" #include "isp.h" -- cgit From f4953fe6c4aeada2d5cafd78aa97587a46d2d8f9 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Wed, 2 Jan 2013 15:37:17 +1030 Subject: virtio-blk: Don't free ida when disk is in use When a file system is mounted on a virtio-blk disk, we then remove it and then reattach it, the reattached disk gets the same disk name and ids as the hot removed one. This leads to very nasty effects - mostly rendering the newly attached device completely unusable. Trying what happens when I do the same thing with a USB device, I saw that the sd node simply doesn't get free'd when a device gets forcefully removed. Imitate the same behavior for vd devices. This way broken vd devices simply are never free'd and newly attached ones keep working just fine. Signed-off-by: Alexander Graf Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/block/virtio_blk.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 0bdde8fba397..07a18e238483 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -889,6 +889,7 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv; int index = vblk->index; + int refc; /* Prevent config work handler from accessing the device. */ mutex_lock(&vblk->config_lock); @@ -903,11 +904,15 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) flush_work(&vblk->config_work); + refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount); put_disk(vblk->disk); mempool_destroy(vblk->pool); vdev->config->del_vqs(vdev); kfree(vblk); - ida_simple_remove(&vd_index_ida, index); + + /* Only free device id if we don't have any users */ + if (refc == 1) + ida_simple_remove(&vd_index_ida, index); } #ifdef CONFIG_PM -- cgit From ac706bf75cb99b91bf2792c52ab5b2e4b94560a1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 17 Dec 2012 07:38:16 -0300 Subject: [media] v4l: vb2: Set data_offset to 0 for single-plane output buffers Single-planar V4L2 buffers are converted to multi-planar vb2 buffers with a single plane when queued. The plane data_offset field is not available in the single-planar API and must be set to 0 for all output buffers. Signed-off-by: Laurent Pinchart Acked-by: Marek Szyprowski Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/videobuf2-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 9f81be23a81f..e02c4797b1c6 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -921,8 +921,10 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb, const struct v4l2_buffer *b * In videobuf we use our internal V4l2_planes struct for * single-planar buffers as well, for simplicity. */ - if (V4L2_TYPE_IS_OUTPUT(b->type)) + if (V4L2_TYPE_IS_OUTPUT(b->type)) { v4l2_planes[0].bytesused = b->bytesused; + v4l2_planes[0].data_offset = 0; + } if (b->memory == V4L2_MEMORY_USERPTR) { v4l2_planes[0].m.userptr = b->m.userptr; -- cgit From 12861dc659c7181e0b52facd97df70c6dd326106 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 12:49:12 -0300 Subject: [media] m5mols: Fix typo in get_fmt callback The check of return value from __find_format() was inverted by mistake. This patch fixes regression introduced in commit 5565a2ad47 [media] m5mols: Protect driver data with a mutex Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/m5mols/m5mols_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index 8131d651de9e..b9b448559409 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -556,7 +556,7 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, mutex_lock(&info->lock); format = __find_format(info, fh, fmt->which, info->res_type); - if (!format) + if (format) fmt->format = *format; else ret = -EINVAL; -- cgit From a26860bdbd632278bbbcc2261b4c28f965472741 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 13:43:05 -0300 Subject: [media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links() Make sure 'ret' is not used uninitialized. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-mdevice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 1bd5678cfeb9..3b74c4aaa854 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -593,7 +593,7 @@ static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) { struct media_entity *source, *sink; unsigned int flags = MEDIA_LNK_FL_ENABLED; - int i, ret; + int i, ret = 0; for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { struct fimc_lite *fimc = fmd->fimc_lite[i]; -- cgit From 7296e25f6e76bedc96cb1f16c200e9ac7a87323b Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Fri, 21 Dec 2012 05:32:59 -0300 Subject: [media] s5p-mfc: Fix interrupt error handling routine New context states were added but handling in s5p_mfc_handle_error for these states was not. After this patch these states are be handled correctly. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 88 ++++++++++++++------------------ 1 file changed, 37 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 3afe879d54d7..5448ad1ea248 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -412,62 +412,48 @@ leave_handle_frame: } /* Error handling for interrupt */ -static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx, - unsigned int reason, unsigned int err) +static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, + struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err) { - struct s5p_mfc_dev *dev; unsigned long flags; - /* If no context is available then all necessary - * processing has been done. */ - if (ctx == NULL) - return; - - dev = ctx->dev; mfc_err("Interrupt Error: %08x\n", err); - s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); - wake_up_dev(dev, reason, err); - /* Error recovery is dependent on the state of context */ - switch (ctx->state) { - case MFCINST_INIT: - /* This error had to happen while acquireing instance */ - case MFCINST_GOT_INST: - /* This error had to happen while parsing the header */ - case MFCINST_HEAD_PARSED: - /* This error had to happen while setting dst buffers */ - case MFCINST_RETURN_INST: - /* This error had to happen while releasing instance */ - clear_work_bit(ctx); - wake_up_ctx(ctx, reason, err); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - ctx->state = MFCINST_ERROR; - break; - case MFCINST_FINISHING: - case MFCINST_FINISHED: - case MFCINST_RUNNING: - /* It is higly probable that an error occured - * while decoding a frame */ - clear_work_bit(ctx); - ctx->state = MFCINST_ERROR; - /* Mark all dst buffers as having an error */ - spin_lock_irqsave(&dev->irqlock, flags); - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->dst_queue, - &ctx->vq_dst); - /* Mark all src buffers as having an error */ - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->src_queue, - &ctx->vq_src); - spin_unlock_irqrestore(&dev->irqlock, flags); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - break; - default: - mfc_err("Encountered an error interrupt which had not been handled\n"); - break; + if (ctx != NULL) { + /* Error recovery is dependent on the state of context */ + switch (ctx->state) { + case MFCINST_RES_CHANGE_INIT: + case MFCINST_RES_CHANGE_FLUSH: + case MFCINST_RES_CHANGE_END: + case MFCINST_FINISHING: + case MFCINST_FINISHED: + case MFCINST_RUNNING: + /* It is higly probable that an error occured + * while decoding a frame */ + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + /* Mark all dst buffers as having an error */ + spin_lock_irqsave(&dev->irqlock, flags); + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->dst_queue, &ctx->vq_dst); + /* Mark all src buffers as having an error */ + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->src_queue, &ctx->vq_src); + spin_unlock_irqrestore(&dev->irqlock, flags); + wake_up_ctx(ctx, reason, err); + break; + default: + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + wake_up_ctx(ctx, reason, err); + break; + } } + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); + s5p_mfc_clock_off(); + wake_up_dev(dev, reason, err); return; } @@ -632,7 +618,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) dev->warn_start) s5p_mfc_handle_frame(ctx, reason, err); else - s5p_mfc_handle_error(ctx, reason, err); + s5p_mfc_handle_error(dev, ctx, reason, err); clear_bit(0, &dev->enter_suspend); break; -- cgit From 216c82c6aba63eeb49d7654b448e0d47bea255bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 3 Jan 2013 17:23:24 -0300 Subject: [media] omap3isp: Don't include The plat/*.h headers are not available to drivers in multiplatform kernels. As the header isn't needed, just remove it. Signed-off-by: Laurent Pinchart Acked-by: Tony Lindgren Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/isp.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index b34bf928d80c..48182e6c7ca2 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -70,8 +70,6 @@ #include #include -#include - #include "isp.h" #include "ispreg.h" #include "ispccdc.h" -- cgit From ac4989874af56435c308bdde9ad9c837a26f8b23 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 25 Oct 2012 10:22:32 -0600 Subject: ioat: Fix DMA memory sync direction correct flag ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [] check_sync+0x132/0x550 [ 226.288983] [] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [] ? wait_for_common+0x72/0x180 [ 226.288995] [] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [] ? kfree+0x259/0x270 [ 226.289004] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [] local_pci_probe+0x5c/0xd0 [ 226.289023] [] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [] do_work_for_cpu+0x18/0x30 [ 226.289029] [] kthread+0xb7/0xc0 [ 226.289033] [] kernel_thread_helper+0x4/0x10 [ 226.289036] [] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [] ? retint_restore_args+0x13/0x13 [ 226.289041] [] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [] debug_dma_map_page+0x87/0x150 [ 226.289050] [] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan CC: Signed-off-by: Vinod Koul --- drivers/dma/ioat/dma_v3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f7f1dc62c15c..ed0e8b796a93 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -951,7 +951,7 @@ static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device) goto free_resources; } } - dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE); + dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE); /* skip validate if the capability is not present */ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask)) -- cgit From e909c682d04e55e77a3c9d158e7dc36027195493 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 7 Jan 2013 10:57:14 +0100 Subject: [media] coda: Fix build due to iram.h rename commit c045e3f13 (ARM: imx: include iram.h rather than mach/iram.h) changed the location of iram.h, which causes the following build error when building the coda driver: drivers/media/platform/coda.c:27:23: error: mach/iram.h: No such file or directory drivers/media/platform/coda.c: In function 'coda_probe': drivers/media/platform/coda.c:2000: error: implicit declaration of function 'iram_alloc' drivers/media/platform/coda.c:2001: warning: assignment makes pointer from integer without a cast drivers/media/platform/coda.c: In function 'coda_remove': drivers/media/platform/coda.c:2024: error: implicit declaration of function 'iram_free' Since the content of iram.h is not imx specific, move it to include/linux/platform_data/imx-iram.h instead. This is an intermediate solution until the i.MX iram allocator is converted to the generic SRAM allocator. Signed-off-by: Sascha Hauer Acked-by: Mauro Carvalho Chehab --- arch/arm/mach-imx/iram.h | 41 ---------------------------------- arch/arm/mach-imx/iram_alloc.c | 3 +-- drivers/media/platform/coda.c | 2 +- include/linux/platform_data/imx-iram.h | 41 ++++++++++++++++++++++++++++++++++ 4 files changed, 43 insertions(+), 44 deletions(-) delete mode 100644 arch/arm/mach-imx/iram.h create mode 100644 include/linux/platform_data/imx-iram.h (limited to 'drivers') diff --git a/arch/arm/mach-imx/iram.h b/arch/arm/mach-imx/iram.h deleted file mode 100644 index 022690c33702..000000000000 --- a/arch/arm/mach-imx/iram.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#include - -#ifdef CONFIG_IRAM_ALLOC - -int __init iram_init(unsigned long base, unsigned long size); -void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); -void iram_free(unsigned long dma_addr, unsigned int size); - -#else - -static inline int __init iram_init(unsigned long base, unsigned long size) -{ - return -ENOMEM; -} - -static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) -{ - return NULL; -} - -static inline void iram_free(unsigned long base, unsigned long size) {} - -#endif diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424f678e..e05cf407db65 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include #include #include - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 7b8b547f2d51..afadd3aba3e0 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -23,8 +23,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/include/linux/platform_data/imx-iram.h b/include/linux/platform_data/imx-iram.h new file mode 100644 index 000000000000..022690c33702 --- /dev/null +++ b/include/linux/platform_data/imx-iram.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include + +#ifdef CONFIG_IRAM_ALLOC + +int __init iram_init(unsigned long base, unsigned long size); +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); +void iram_free(unsigned long dma_addr, unsigned int size); + +#else + +static inline int __init iram_init(unsigned long base, unsigned long size) +{ + return -ENOMEM; +} + +static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + return NULL; +} + +static inline void iram_free(unsigned long base, unsigned long size) {} + +#endif -- cgit From bef2a8d3f6cb91bc8743bdd63d3eb6a37bf27b12 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Tue, 30 Oct 2012 15:58:50 +0000 Subject: dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index dbf0e6f8de8a..a7dcf78b1ff8 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -684,9 +684,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - imxdmac->hw_chaining = 1; - if (!imxdma_hw_chain(imxdmac)) - return -EINVAL; + imxdmac->hw_chaining = 0; + imxdmac->ccr_from_device = (mode | IMX_DMA_TYPE_FIFO) | ((IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) << 2) | CCR_REN; -- cgit From b9bb37f5486ba05d2b557dbf1aeb754fef618985 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 9 Jan 2013 15:26:22 +0530 Subject: dma: tegra: implement flags parameters for cyclic transfer The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan CC: Signed-off-by: Vinod Koul --- drivers/dma/tegra20-apb-dma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index efdfffa13349..bf58bb8b0206 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get( if (async_tx_test_ack(&dma_desc->txd)) { list_del(&dma_desc->node); spin_unlock_irqrestore(&tdc->lock, flags); + dma_desc->txd.flags = 0; return dma_desc; } } @@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT; ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32; - csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC; + csr |= TEGRA_APBDMA_CSR_FLOW; + if (flags & DMA_PREP_INTERRUPT) + csr |= TEGRA_APBDMA_CSR_IE_EOC; csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT; apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1; @@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( mem += len; } sg_req->last_sg = true; - dma_desc->txd.flags = 0; + if (flags & DMA_CTRL_ACK) + dma_desc->txd.flags = DMA_CTRL_ACK; /* * Make sure that mode should not be conflicting with currently -- cgit From eed307e290b96636def331375e065aca43f9069a Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Tue, 11 Dec 2012 11:41:20 +0800 Subject: Bluetooth: Add support for IMC Networks [13d3:3393] Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3393 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index b00000e8aef6..3418bf988d01 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -81,6 +81,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, + { USB_DEVICE(0x13d3, 0x3393) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -108,6 +109,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1d4ede5b892..acd5be40fc04 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -139,6 +139,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit From 2c262b2a5235b7f5b18d4d58394511f76371d7cb Mon Sep 17 00:00:00 2001 From: Daniel Schaal Date: Sat, 29 Dec 2012 11:14:34 +0100 Subject: Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k. T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3006 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Schaal Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 3418bf988d01..afe9d8e8901d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -77,6 +77,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x04CA, 0x3006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -105,6 +106,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index acd5be40fc04..83ff97089e31 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit From 3a61eda81ebcfc006ebb1496764299d53e5bf67f Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:24:59 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04e Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index afe9d8e8901d..47fc6b5c6488 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -83,6 +83,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, + { USB_DEVICE(0x0489, 0xe04e) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 83ff97089e31..9a52f8b6bfd9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit From 2582d529c44d12502a700f1c3db062b9f44679bc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:25:00 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e056 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 47fc6b5c6488..be178949bc8b 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -84,6 +84,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, + { USB_DEVICE(0x0489, 0xe056) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -114,6 +115,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9a52f8b6bfd9..3f6a993539e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -142,6 +142,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit From 7b7a4efe76a8a96b20f7ac8047869f43e65b10e4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 23:05:17 -0200 Subject: iio: mxs-lradc: indexes are unsigned Fix the following warning when building with W=1 option: drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_trigger_handler': drivers/staging/iio/adc/mxs-lradc.c:244:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index fb31b457a56a..c5ceb9d90ea8 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -239,7 +239,7 @@ static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) struct mxs_lradc *lradc = iio_priv(iio); const uint32_t chan_value = LRADC_CH_ACCUMULATE | ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - int i, j = 0; + unsigned int i, j = 0; for_each_set_bit(i, iio->active_scan_mask, iio->masklength) { lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); -- cgit From a02a8c42b588059aa06dff6f614a7afcba12df69 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 9 Jan 2013 14:01:00 +0000 Subject: staging:iio:adis16080: Perform sign extension The adis16080 reports sample values in twos complement. So we need to perform a sign extension on the result, otherwise negative values will be reported incorrectly as large positive values. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/gyro/adis16080_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 3525a68d6a75..41d7350d030f 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -69,7 +69,7 @@ static int adis16080_spi_read(struct iio_dev *indio_dev, ret = spi_read(st->us, st->buf, 2); if (ret == 0) - *val = ((st->buf[0] & 0xF) << 8) | st->buf[1]; + *val = sign_extend32(((st->buf[0] & 0xF) << 8) | st->buf[1], 11); mutex_unlock(&st->buf_lock); return ret; -- cgit From f4d6f7dce71a5da93da50272ff1670bf2f1146b1 Mon Sep 17 00:00:00 2001 From: Sergio Cambra Date: Thu, 10 Jan 2013 01:06:55 +0100 Subject: Bluetooth device 04ca:3008 should use ath3k Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be178949bc8b..33c9a44a9678 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3f6a993539e8..7e351e345476 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -136,6 +136,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit From 9b89cb8172f2ddd5a0aab74f20155036065956ac Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 2 Jan 2013 14:23:38 -0800 Subject: gpio: samsung: remove inclusion The is not needed for gpio-samsung. Cc: Linus Walleij Cc: Grant Likely Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 01f7fe955590..9070f8632002 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -32,7 +32,6 @@ #include #include -#include #include #include -- cgit From 9bf42300e672fb1b5587d1da5486f8b144e74598 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 28 Aug 2012 18:38:58 -0300 Subject: [media] uvcvideo: Return -EACCES when trying to set a read-only control Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") also reverted part of commit 30ecb936cbcd83e3735625ac63e1b4466546f5fe ("uvcvideo: Return -EACCES when trying to access a read/write-only control") by mistake. Fix it. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_ctrl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index 2bb7613ddebb..d5baab17a5ef 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -1431,8 +1431,10 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, int ret; ctrl = uvc_find_control(chain, xctrl->id, &mapping); - if (ctrl == NULL || (ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR) == 0) + if (ctrl == NULL) return -EINVAL; + if (!(ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR)) + return -EACCES; /* Clamp out of range values. */ switch (mapping->v4l2_type) { -- cgit From 29005c09f41d459c458eb8761a54703b56afb16a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:32:04 -0300 Subject: [media] uvcvideo: Cleanup leftovers of partial revert Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") missed two modifications. Clean them up. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_v4l2.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index f2ee8c6b0d8d..5eb89894f90b 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -657,8 +657,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_get(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = ret == -ENOENT - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } @@ -686,9 +685,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = (ret == -ENOENT && - cmd == VIDIOC_S_EXT_CTRLS) - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } -- cgit From 68d6f84ba0c47e658beff3a4bf0c43acee4b4690 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:42:00 -0300 Subject: [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures The uvc_set_ctrl() calls don't write to the hardware. A failure at that point thus leaves the device in a clean state, with no control modified. Set the error_idx field to the count value to reflect that, as per the V4L2 specification. TRY_EXT_CTRLS is unchanged and the error_idx field must always be set to the failed control index in that case. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/uvc/uvc_v4l2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 5eb89894f90b..68d59b527492 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -685,7 +685,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = i; + ctrls->error_idx = cmd == VIDIOC_S_EXT_CTRLS + ? ctrls->count : i; return ret; } } -- cgit From 30d4b180e20c081f435143f8bc211c66a930608a Mon Sep 17 00:00:00 2001 From: Tamas Lengyel Date: Mon, 31 Dec 2012 15:44:30 -0500 Subject: xen/privcmd: Relax access control in privcmd_ioctl_mmap In the privcmd Linux driver two checks in the functions privcmd_ioctl_mmap and privcmd_ioctl_mmap_batch are not needed as they are trying to enforce hypervisor-level access control. They should be removed as they break secondary control domains when performing dom0 disaggregation. Xen itself provides adequate security controls around these hypercalls and these checks prevent those controls from functioning as intended. Signed-off-by: Tamas K Lengyel Cc: Daniel De Graaf [v1: Fixed up the patch and commit description] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index b9d08987a5a5..f6316127f53f 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -199,9 +199,6 @@ static long privcmd_ioctl_mmap(void __user *udata) LIST_HEAD(pagelist); struct mmap_mfn_state state; - if (!xen_initial_domain()) - return -EPERM; - /* We only support privcmd_ioctl_mmap_batch for auto translated. */ if (xen_feature(XENFEAT_auto_translated_physmap)) return -ENOSYS; @@ -360,9 +357,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) int *err_array = NULL; struct mmap_batch_state state; - if (!xen_initial_domain()) - return -EPERM; - switch (version) { case 1: if (copy_from_user(&m, udata, sizeof(struct privcmd_mmapbatch))) -- cgit From d7b9c5204e9c6810a20d509ee47bc70419096e59 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:10 -0800 Subject: mwifiex: update config_bands during infra association Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 15 +-------------- drivers/net/wireless/mwifiex/sta_ioctl.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index efe525be27dd..e74e1b99419a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1459,7 +1459,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, struct cfg80211_ssid req_ssid; int ret, auth_type = 0; struct cfg80211_bss *bss = NULL; - u8 is_scanning_required = 0, config_bands = 0; + u8 is_scanning_required = 0; memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); @@ -1478,19 +1478,6 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, /* disconnect before try to associate */ mwifiex_deauthenticate(priv, NULL); - if (channel) { - if (mode == NL80211_IFTYPE_STATION) { - if (channel->band == IEEE80211_BAND_2GHZ) - config_bands = BAND_B | BAND_G | BAND_GN; - else - config_bands = BAND_A | BAND_AN; - - if (!((config_bands | priv->adapter->fw_bands) & - ~priv->adapter->fw_bands)) - priv->adapter->config_bands = config_bands; - } - } - /* As this is new association, clear locally stored * keys and security related flags */ priv->sec_info.wpa_enabled = false; diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 60e88b58039d..f542bb8ccbc8 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -283,6 +283,20 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (ret) goto done; + if (bss_desc) { + u8 config_bands = 0; + + if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band) + == HostCmd_SCAN_RADIO_TYPE_BG) + config_bands = BAND_B | BAND_G | BAND_GN; + else + config_bands = BAND_A | BAND_AN; + + if (!((config_bands | adapter->fw_bands) & + ~adapter->fw_bands)) + adapter->config_bands = config_bands; + } + ret = mwifiex_check_network_compatibility(priv, bss_desc); if (ret) goto done; -- cgit From 3b86acb8088d0c7c4cddc340a13dec5cef110e30 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:11 -0800 Subject: mwifiex: correct config_bands handling for ibss network BAND_G is implicit when BAND_GN is present. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index e74e1b99419a..cdb11b3964e2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1694,7 +1694,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv, if (cfg80211_get_chandef_type(¶ms->chandef) != NL80211_CHAN_NO_HT) - config_bands |= BAND_GN; + config_bands |= BAND_G | BAND_GN; } else { if (cfg80211_get_chandef_type(¶ms->chandef) == NL80211_CHAN_NO_HT) -- cgit From 0981c3b24ef664f5611008a6e6d0622fac6d892b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 9 Jan 2013 16:07:48 +0530 Subject: ath9k_htc: Fix memory leak SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Cc: Reported-by: Larry Finger Signed-off-by: Sujith Manoharan Tested-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index 4a9570dfba72..aac4a406a513 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -344,6 +344,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, endpoint->ep_callbacks.tx(endpoint->ep_callbacks.priv, skb, htc_hdr->endpoint_id, txok); + } else { + kfree_skb(skb); } } -- cgit From a3dc48e82bb146ef11cf75676c8410c1df29b0c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:52 +0100 Subject: ath9k: do not link receive buffers during flush On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a938bf..01c3ba47a5b9 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -744,6 +744,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } + list_del(&bf->list); if (!bf->bf_mpdu) return bf; @@ -1254,14 +1255,15 @@ requeue_drop_frag: sc->rx.frag = NULL; } requeue: + list_add_tail(&bf->list, &sc->rx.rxbuf); + if (flush) + continue; + if (edma) { - list_add_tail(&bf->list, &sc->rx.rxbuf); ath_rx_edma_buf_link(sc, qtype); } else { - list_move_tail(&bf->list, &sc->rx.rxbuf); ath_rx_buf_link(sc, bf); - if (!flush) - ath9k_hw_rxena(ah); + ath9k_hw_rxena(ah); } } while (1); -- cgit From 1adb2e2b5f85023d17eb4f95386a57029df27c88 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:53 +0100 Subject: ath9k: fix double-free bug on beacon generate failure When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd801a3..4eb269d6b974 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -147,6 +147,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(skb); bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; } skb = ieee80211_beacon_get(hw, vif); -- cgit From 3adcf20afb585993ffee24de36d1975f6b26b120 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:54 +0100 Subject: ath9k: remove the WARN_ON that triggers if generating a beacon fails During teardown, mac80211 will not return a new beacon. This is normal and handled properly in the driver, so there's no need to spam the user with a kernel warning here. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 4eb269d6b974..2ca355e94da6 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -360,7 +360,6 @@ void ath9k_beacon_tasklet(unsigned long data) return; bf = ath9k_beacon_generate(sc->hw, vif); - WARN_ON(!bf); if (sc->beacon.bmisscnt != 0) { ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n", -- cgit From 7fc00a3054b70b1794c2d64db703eb467ad0365c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:55 +0100 Subject: ath9k: add a better fix for the rx tasklet vs rx flush race Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug.c | 1 - drivers/net/wireless/ath/ath9k/debug.h | 2 -- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ drivers/net/wireless/ath/ath9k/recv.c | 15 --------------- 5 files changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a19efda..7335e9ef0249 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -646,7 +646,6 @@ void ath_ant_comb_update(struct ath_softc *sc); enum sc_op_flags { SC_OP_INVALID, SC_OP_BEACONS, - SC_OP_RXFLUSH, SC_OP_ANI_RUN, SC_OP_PRIM_STA_VIF, SC_OP_HW_RESET, diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9edc2401..e585fc827c50 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -861,7 +861,6 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, RXS_ERR("RX-LENGTH-ERR", rx_len_err); RXS_ERR("RX-OOM-ERR", rx_oom_err); RXS_ERR("RX-RATE-ERR", rx_rate_err); - RXS_ERR("RX-DROP-RXFLUSH", rx_drop_rxflush); RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err); PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b46411e..6df2ab62dcb7 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -216,7 +216,6 @@ struct ath_tx_stats { * @rx_oom_err: No. of frames dropped due to OOM issues. * @rx_rate_err: No. of frames dropped due to rate errors. * @rx_too_many_frags_err: Frames dropped due to too-many-frags received. - * @rx_drop_rxflush: No. of frames dropped due to RX-FLUSH. * @rx_beacons: No. of beacons received. * @rx_frags: No. of rx-fragements received. */ @@ -235,7 +234,6 @@ struct ath_rx_stats { u32 rx_oom_err; u32 rx_rate_err; u32 rx_too_many_frags_err; - u32 rx_drop_rxflush; u32 rx_beacons; u32 rx_frags; }; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9af1528..d3cf01ec2d15 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,6 +196,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); + tasklet_disable(&sc->intr_tq); + if (!ath_stoprecv(sc)) ret = false; @@ -210,6 +212,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath_flushrecv(sc); } + tasklet_enable(&sc->intr_tq); + return ret; } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 01c3ba47a5b9..6b83b3bbfe8c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -286,7 +286,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) spin_lock_init(&sc->sc_pcu_lock); spin_lock_init(&sc->rx.rxbuflock); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -501,11 +500,9 @@ bool ath_stoprecv(struct ath_softc *sc) void ath_flushrecv(struct ath_softc *sc) { - set_bit(SC_OP_RXFLUSH, &sc->sc_flags); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_rx_tasklet(sc, 1, true); ath_rx_tasklet(sc, 1, false); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); } static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) @@ -1067,9 +1064,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) do { bool decrypt_error = false; - /* If handling rx interrupt and flush is in progress => exit */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) - break; memset(&rs, 0, sizeof(rs)); if (edma) @@ -1112,15 +1106,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_debug_stat_rx(sc, &rs); - /* - * If we're asked to flush receive queue, directly - * chain it back at the queue without processing it. - */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags)) { - RX_STAT_INC(rx_drop_rxflush); - goto requeue_drop_frag; - } - memset(rxs, 0, sizeof(struct ieee80211_rx_status)); rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; -- cgit From 4b883f021b9ccf2df3d14425e6e610281fb6a35e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:56 +0100 Subject: ath9k: fix rx flush handling Right now the rx flush is not doing anything useful on AR9003+, as it only works if the buffers in the rx FIFO have not been purged yet, as is done by ath_stoprecv. To fix this, always call ath_flushrecv from within ath_stoprecv before the FIFO is emptied, but still after the hw receive path has been stopped. This ensures that frames received (and ACKed by the hardware) shortly before a reset will be seen by the software, which should improve A-MPDU session stability. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 16 +++------------- drivers/net/wireless/ath/ath9k/recv.c | 16 +++++++++------- 3 files changed, 12 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7335e9ef0249..32b2d5cd9a5a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -328,7 +328,6 @@ struct ath_rx { int ath_startrecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc); -void ath_flushrecv(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc); int ath_rx_init(struct ath_softc *sc, int nbufs); void ath_rx_cleanup(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index d3cf01ec2d15..9844b758f81d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -204,14 +204,6 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!flush) { - if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); - } else { - ath_flushrecv(sc); - } - tasklet_enable(&sc->intr_tq); return ret; @@ -266,7 +258,6 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = NULL; bool fastcc = true; - bool flush = false; int r; __ath_cancel_work(sc); @@ -280,11 +271,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, if (!hchan) { fastcc = false; - flush = true; hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, retry_tx)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -808,7 +798,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, false); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6b83b3bbfe8c..67f58d4bb10e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -472,6 +472,13 @@ start_recv: return 0; } +static void ath_flushrecv(struct ath_softc *sc) +{ + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_rx_tasklet(sc, 1, true); + ath_rx_tasklet(sc, 1, false); +} + bool ath_stoprecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -482,6 +489,8 @@ bool ath_stoprecv(struct ath_softc *sc) ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); + ath_flushrecv(sc); + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_edma_stop_recv(sc); else @@ -498,13 +507,6 @@ bool ath_stoprecv(struct ath_softc *sc) return stopped && !reset; } -void ath_flushrecv(struct ath_softc *sc) -{ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); -} - static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) { /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ -- cgit From a1fe52801a992e590cdaee2fb47a94bac9b5da90 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 10 Jan 2013 11:20:48 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Cc: stable@vger.kernel.org Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ecbe2ea..0f71d1d4339d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1407,9 +1407,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit From c2be6f93b383c873a4f9d521afa49b1b67d06085 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Fri, 11 Jan 2013 10:15:54 +0800 Subject: PCI: pciehp: Use per-slot workqueues to avoid deadlock When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman Reviewed-by: Kenji Kaneshige Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/hotplug/pciehp.h | 2 +- drivers/pci/hotplug/pciehp_core.c | 11 ++--------- drivers/pci/hotplug/pciehp_ctrl.c | 8 ++++---- drivers/pci/hotplug/pciehp_hpc.c | 11 ++++++++++- 4 files changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 26ffd3e3fb74..2c113de94323 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -44,7 +44,6 @@ extern bool pciehp_poll_mode; extern int pciehp_poll_time; extern bool pciehp_debug; extern bool pciehp_force; -extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ do { \ @@ -78,6 +77,7 @@ struct slot { struct hotplug_slot *hotplug_slot; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; }; struct event_info { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 916bf4f53aba..939bd1d4b5b1 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -42,7 +42,6 @@ bool pciehp_debug; bool pciehp_poll_mode; int pciehp_poll_time; bool pciehp_force; -struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -340,18 +339,13 @@ static int __init pcied_init(void) { int retval = 0; - pciehp_wq = alloc_workqueue("pciehp", 0, 0); - if (!pciehp_wq) - return -ENOMEM; - pciehp_firmware_init(); retval = pcie_port_service_register(&hpdriver_portdrv); dbg("pcie_port_service_register = %d\n", retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(pciehp_wq); + if (retval) dbg("Failure to register service\n"); - } + return retval; } @@ -359,7 +353,6 @@ static void __exit pcied_cleanup(void) { dbg("unload_pciehpd()\n"); pcie_port_service_unregister(&hpdriver_portdrv); - destroy_workqueue(pciehp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 27f44295a657..38f018679175 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -49,7 +49,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -344,7 +344,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -377,7 +377,7 @@ static void handle_button_press_event(struct slot *p_slot) if (ATTN_LED(ctrl)) pciehp_set_attention_status(p_slot, 0); - queue_delayed_work(pciehp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: @@ -439,7 +439,7 @@ static void handle_surprise_event(struct slot *p_slot) else p_slot->state = POWERON_STATE; - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); } static void interrupt_event_handler(struct work_struct *work) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 13b2eaf7ba43..5127f3f41821 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -773,23 +773,32 @@ static void pcie_shutdown_notification(struct controller *ctrl) static int pcie_init_slot(struct controller *ctrl) { struct slot *slot; + char name[32]; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) return -ENOMEM; + snprintf(name, sizeof(name), "pciehp-%u", PSN(ctrl)); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) + goto abort; + slot->ctrl = ctrl; mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); ctrl->slot = slot; return 0; +abort: + kfree(slot); + return -ENOMEM; } static void pcie_cleanup_slot(struct controller *ctrl) { struct slot *slot = ctrl->slot; cancel_delayed_work(&slot->work); - flush_workqueue(pciehp_wq); + destroy_workqueue(slot->wq); kfree(slot); } -- cgit From a82b6af37d20bfe6e99a4d890f1cf1d89059929f Mon Sep 17 00:00:00 2001 From: Betty Dall Date: Sun, 13 Jan 2013 15:46:18 -0700 Subject: PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall Signed-off-by: Bjorn Helgaas Reviewed-by: Shuah Khan CC: stable@vger.kernel.org --- drivers/pci/pcie/aer/aerdrv_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 421bbc5fee32..564d97f94b6c 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -630,6 +630,7 @@ static void aer_recover_work_func(struct work_struct *work) continue; } do_recovery(pdev, entry.severity); + pci_dev_put(pdev); } } #endif -- cgit From 10959d72d401cec2781ca636b07d692c625e1c91 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 15:30:52 -0700 Subject: PCI: shpchp: Make shpchp_wq non-ordered e24dcbef93 ("shpchp: update workqueue usage") was described as adding non-ordered shpchp_wq, but it actually made it an *ordered* workqueue. This patch changes shpchp_wq to be non-ordered, as described in the e24dcbef93 commit log and as was done for pciehp by a827ea307b ("pciehp: update workqueue usage"). Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo --- drivers/pci/hotplug/shpchp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index b6de307248e4..59ca86c924a3 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -366,7 +366,7 @@ static int __init shpcd_init(void) { int retval = 0; - shpchp_wq = alloc_ordered_workqueue("shpchp", 0); + shpchp_wq = alloc_workqueue("shpchp", 0, 0); if (!shpchp_wq) return -ENOMEM; -- cgit From afc10301f70350b490ca518ceb793928854b5453 Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sun, 13 Jan 2013 16:56:43 +0100 Subject: video: imxfb: fix imxfb_info configuration order The devtype field for fbi (struct imxfb_info) must be set after memset call to avoid some wrong behaviour (pixel size). Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo --- drivers/video/imxfb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index e501dbc966b3..8435c5d601a1 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -729,6 +729,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) memset(fbi, 0, sizeof(struct imxfb_info)); + fbi->devtype = pdev->id_entry->driver_data; + strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); info->fix.type = FB_TYPE_PACKED_PIXELS; @@ -789,7 +791,6 @@ static int __init imxfb_probe(struct platform_device *pdev) return -ENOMEM; fbi = info->par; - fbi->devtype = pdev->id_entry->driver_data; if (!fb_mode) fb_mode = pdata->mode[0].mode.name; -- cgit From d347e75847c1fb299c97736638f45e6ea39702d4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:07:22 -0700 Subject: PCI: shpchp: Handle push button event asynchronously Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in shpchp as a result. 486b10b9f4 ("PCI: pciehp: Handle push button event asynchronously") made the same change to pciehp. I split this out from a patch by Yijing Wang so we fix one thing at a time and to make the shpchp history correspond more closely with the pciehp history. Signed-off-by: Bjorn Helgaas CC: Kenji Kaneshige --- drivers/pci/hotplug/shpchp.h | 1 - drivers/pci/hotplug/shpchp_core.c | 10 ---------- drivers/pci/hotplug/shpchp_ctrl.c | 2 +- 3 files changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index ca64932e658b..1b69d955a31f 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -47,7 +47,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; extern struct workqueue_struct *shpchp_wq; -extern struct workqueue_struct *shpchp_ordered_wq; #define dbg(format, arg...) \ do { \ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 59ca86c924a3..3774e0d5506e 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -40,7 +40,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; struct workqueue_struct *shpchp_wq; -struct workqueue_struct *shpchp_ordered_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -181,7 +180,6 @@ void cleanup_slots(struct controller *ctrl) list_del(&slot->slot_list); cancel_delayed_work(&slot->work); flush_workqueue(shpchp_wq); - flush_workqueue(shpchp_ordered_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -370,17 +368,10 @@ static int __init shpcd_init(void) if (!shpchp_wq) return -ENOMEM; - shpchp_ordered_wq = alloc_ordered_workqueue("shpchp_ordered", 0); - if (!shpchp_ordered_wq) { - destroy_workqueue(shpchp_wq); - return -ENOMEM; - } - retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); if (retval) { - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); } return retval; @@ -390,7 +381,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index f9b5a52e4115..fd2cae9eb6c2 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_ordered_wq, &info->work); + queue_work(shpchp_wq, &info->work); out: mutex_unlock(&p_slot->lock); } -- cgit From f652e7d2916fe2fcf9e7d709aa5b7476b431e2dd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:21:15 -0700 Subject: PCI: shpchp: Use per-slot workqueues to avoid deadlock When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/hotplug/shpchp_core.c | 26 ++++++++++++++------------ drivers/pci/hotplug/shpchp_ctrl.c | 6 +++--- 3 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 1b69d955a31f..b849f995075a 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -46,7 +46,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; -extern struct workqueue_struct *shpchp_wq; #define dbg(format, arg...) \ do { \ @@ -90,6 +89,7 @@ struct slot { struct list_head slot_list; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; u8 hp_slot; }; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 3774e0d5506e..3100c52c837c 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; -struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -128,6 +127,14 @@ static int init_slots(struct controller *ctrl) slot->device = ctrl->slot_device_offset + i; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i); + + snprintf(name, sizeof(name), "shpchp-%d", slot->number); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) { + retval = -ENOMEM; + goto error_info; + } + mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, shpchp_queue_pushbutton_work); @@ -147,7 +154,7 @@ static int init_slots(struct controller *ctrl) if (retval) { ctrl_err(ctrl, "pci_hp_register failed with error %d\n", retval); - goto error_info; + goto error_slotwq; } get_power_status(hotplug_slot, &info->power_status); @@ -159,6 +166,8 @@ static int init_slots(struct controller *ctrl) } return 0; +error_slotwq: + destroy_workqueue(slot->wq); error_info: kfree(info); error_hpslot: @@ -179,7 +188,7 @@ void cleanup_slots(struct controller *ctrl) slot = list_entry(tmp, struct slot, slot_list); list_del(&slot->slot_list); cancel_delayed_work(&slot->work); - flush_workqueue(shpchp_wq); + destroy_workqueue(slot->wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -362,18 +371,12 @@ static struct pci_driver shpc_driver = { static int __init shpcd_init(void) { - int retval = 0; - - shpchp_wq = alloc_workqueue("shpchp", 0, 0); - if (!shpchp_wq) - return -ENOMEM; + int retval; retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(shpchp_wq); - } + return retval; } @@ -381,7 +384,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index fd2cae9eb6c2..58499277903a 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -51,7 +51,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -501,7 +501,7 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->green_led_blink(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); - queue_delayed_work(shpchp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: -- cgit From 1eaca39a84170b369fe61fb1da3c1e8606859e99 Mon Sep 17 00:00:00 2001 From: Bian Yu Date: Wed, 12 Dec 2012 22:26:58 -0500 Subject: [libata] ahci: Fix lack of command retry after a success error handler. It should be a mistake introduced by commit 8d899e70c1b3afff. qc->flags can't be set AC_ERR_* Signed-off-by: Bian Yu Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index bf039b0e97b7..bcf4437214f5 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, */ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) { - if (qc->flags & AC_ERR_MEDIA) + if (qc->err_mask & AC_ERR_MEDIA) return 0; /* don't retry media errors */ if (qc->flags & ATA_QCFLAG_IO) return 1; /* otherwise retry anything from fs stack */ -- cgit From 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Fri, 4 Jan 2013 14:39:09 -0800 Subject: [libata] ahci: Add support for Enmotus Bobcat device. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7862d17976b7..497912732566 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* The Connext uses non-standard BAR */ + /* Both Connext and Enmotus devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; /* acquire resources */ rc = pcim_enable_device(pdev); -- cgit From 803739d25c2343da6d2f95eebdcbc08bf67097d4 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Mon, 17 Dec 2012 23:18:59 +0800 Subject: [libata] replace sata_settings with devslp_timing NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov Signed-off-by: Shane Huang Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libahci.c | 6 +++--- drivers/ata/libata-core.c | 22 +++++++++++++--------- include/linux/ata.h | 8 +++++--- include/linux/libata.h | 4 ++-- 4 files changed, 23 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 320712a7b9ea..6cd7805e47ca 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) /* Use the nominal value 10 ms if the read MDAT is zero, * the nominal value of DETO is 20 ms. */ - if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & ATA_LOG_DEVSLP_VALID_MASK) { - mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & ATA_LOG_DEVSLP_MDAT_MASK; if (!mdat) mdat = 10; - deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; if (!deto) deto = 20; } else { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9e8b99af400d..46cd3f4c6aaa 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev) } } - /* check and mark DevSlp capability */ - if (ata_id_has_devslp(dev->id)) - dev->flags |= ATA_DFLAG_DEVSLP; - - /* Obtain SATA Settings page from Identify Device Data Log, - * which contains DevSlp timing variables etc. - * Exclude old devices with ata_id_has_ncq() + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. */ - if (ata_id_has_ncq(dev->id)) { + if (ata_id_has_devslp(dev->id)) { + u8 sata_setting[ATA_SECT_SIZE]; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, ATA_LOG_SATA_SETTINGS, - dev->sata_settings, + sata_setting, 1); if (err_mask) ata_dev_dbg(dev, "failed to get Identify Device Data, Emask 0x%x\n", err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } } dev->cdb_len = 16; diff --git a/include/linux/ata.h b/include/linux/ata.h index 408da9502177..8f7a3d68371a 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -297,10 +297,12 @@ enum { ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_SATA_ID_DEV_DATA = 0x30, ATA_LOG_SATA_SETTINGS = 0x08, - ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_OFFSET = 0x30, + ATA_LOG_DEVSLP_SIZE = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x00, ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, - ATA_LOG_DEVSLP_DETO = 0x31, - ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_DETO = 0x01, + ATA_LOG_DEVSLP_VALID = 0x07, ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 83ba0ab2c915..649e5f86b5f0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -652,8 +652,8 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; - /* Identify Device Data Log (30h), SATA Settings (page 08h) */ - u8 sata_settings[ATA_SECT_SIZE]; + /* DEVSLP Timing Variables from Identify Device Data Log */ + u8 devslp_timing[ATA_LOG_DEVSLP_SIZE]; /* error history */ int spdn_cnt; -- cgit From 463e3ed3eacc8f47866e5d612bd8ee0bcee5e2f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 10:50:15 +0100 Subject: ath9k: remove sc->rx.rxbuflock to fix a deadlock The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/recv.c | 13 ------------- 2 files changed, 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 32b2d5cd9a5a..42794c546a40 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -317,7 +317,6 @@ struct ath_rx { u32 *rxlink; u32 num_pkts; unsigned int rxfilter; - spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; struct ath_buf *rx_bufptr; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 67f58d4bb10e..90752f246970 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -254,8 +254,6 @@ rx_init_fail: static void ath_edma_start_recv(struct ath_softc *sc) { - spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_rxena(sc->sc_ah); ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP, @@ -267,8 +265,6 @@ static void ath_edma_start_recv(struct ath_softc *sc) ath_opmode_init(sc); ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - - spin_unlock_bh(&sc->rx.rxbuflock); } static void ath_edma_stop_recv(struct ath_softc *sc) @@ -285,7 +281,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) int error = 0; spin_lock_init(&sc->sc_pcu_lock); - spin_lock_init(&sc->rx.rxbuflock); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -446,7 +441,6 @@ int ath_startrecv(struct ath_softc *sc) return 0; } - spin_lock_bh(&sc->rx.rxbuflock); if (list_empty(&sc->rx.rxbuf)) goto start_recv; @@ -467,8 +461,6 @@ start_recv: ath_opmode_init(sc); ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - spin_unlock_bh(&sc->rx.rxbuflock); - return 0; } @@ -484,7 +476,6 @@ bool ath_stoprecv(struct ath_softc *sc) struct ath_hw *ah = sc->sc_ah; bool stopped, reset = false; - spin_lock_bh(&sc->rx.rxbuflock); ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); @@ -495,7 +486,6 @@ bool ath_stoprecv(struct ath_softc *sc) ath_edma_stop_recv(sc); else sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.rxbuflock); if (!(ah->ah_flags & AH_UNPLUGGED) && unlikely(!stopped)) { @@ -1059,7 +1049,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) dma_type = DMA_FROM_DEVICE; qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; - spin_lock_bh(&sc->rx.rxbuflock); tsf = ath9k_hw_gettsf64(ah); tsf_lower = tsf & 0xffffffff; @@ -1254,8 +1243,6 @@ requeue: } } while (1); - spin_unlock_bh(&sc->rx.rxbuflock); - if (!(ah->imask & ATH9K_INT_RXEOL)) { ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN); ath9k_hw_set_interrupts(ah); -- cgit From 4668cce527acb3bd048c5e6c99b157a14b214671 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 16:56:46 +0100 Subject: ath9k: disable the tasklet before taking the PCU lock Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9844b758f81d..3796e65c26f1 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,16 +196,12 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - tasklet_disable(&sc->intr_tq); - if (!ath_stoprecv(sc)) ret = false; if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - tasklet_enable(&sc->intr_tq); - return ret; } @@ -262,6 +258,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, __ath_cancel_work(sc); + tasklet_disable(&sc->intr_tq); spin_lock_bh(&sc->sc_pcu_lock); if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) { @@ -296,6 +293,8 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, out: spin_unlock_bh(&sc->sc_pcu_lock); + tasklet_enable(&sc->intr_tq); + return r; } -- cgit From 5dbbaf2de89613d19a9286d4db0a535ca2735d26 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Mon, 14 Jan 2013 07:12:19 +0000 Subject: tun: fix LSM/SELinux labeling of tun/tap devices This patch corrects some problems with LSM/SELinux that were introduced with the multiqueue patchset. The problem stems from the fact that the multiqueue work changed the relationship between the tun device and its associated socket; before the socket persisted for the life of the device, however after the multiqueue changes the socket only persisted for the life of the userspace connection (fd open). For non-persistent devices this is not an issue, but for persistent devices this can cause the tun device to lose its SELinux label. We correct this problem by adding an opaque LSM security blob to the tun device struct which allows us to have the LSM security state, e.g. SELinux labeling information, persist for the lifetime of the tun device. In the process we tweak the LSM hooks to work with this new approach to TUN device/socket labeling and introduce a new LSM hook, security_tun_dev_attach_queue(), to approve requests to attach to a TUN queue via TUNSETQUEUE. The SELinux code has been adjusted to match the new LSM hooks, the other LSMs do not make use of the LSM TUN controls. This patch makes use of the recently added "tun_socket:attach_queue" permission to restrict access to the TUNSETQUEUE operation. On older SELinux policies which do not define the "tun_socket:attach_queue" permission the access control decision for TUNSETQUEUE will be handled according to the SELinux policy's unknown permission setting. Signed-off-by: Paul Moore Acked-by: Eric Paris Tested-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 23 +++++++++++---- include/linux/security.h | 59 ++++++++++++++++++++++++++++++--------- security/capability.c | 24 ++++++++++++++-- security/security.c | 28 +++++++++++++++---- security/selinux/hooks.c | 50 +++++++++++++++++++++++++-------- security/selinux/include/objsec.h | 4 +++ 6 files changed, 151 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index af372d0957fe..c81680dc10eb 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -185,6 +185,7 @@ struct tun_struct { unsigned long ageing_time; unsigned int numdisabled; struct list_head disabled; + void *security; }; static inline u32 tun_hashfn(u32 rxhash) @@ -490,6 +491,10 @@ static int tun_attach(struct tun_struct *tun, struct file *file) struct tun_file *tfile = file->private_data; int err; + err = security_tun_dev_attach(tfile->socket.sk, tun->security); + if (err < 0) + goto out; + err = -EINVAL; if (rtnl_dereference(tfile->tun)) goto out; @@ -1373,6 +1378,7 @@ static void tun_free_netdev(struct net_device *dev) BUG_ON(!(list_empty(&tun->disabled))); tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); free_netdev(dev); } @@ -1562,7 +1568,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (tun_not_capable(tun)) return -EPERM; - err = security_tun_dev_attach(tfile->socket.sk); + err = security_tun_dev_open(tun->security); if (err < 0) return err; @@ -1619,7 +1625,9 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) spin_lock_init(&tun->lock); - security_tun_dev_post_create(&tfile->sk); + err = security_tun_dev_alloc_security(&tun->security); + if (err < 0) + goto err_free_dev; tun_net_init(dev); @@ -1789,10 +1797,14 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) if (ifr->ifr_flags & IFF_ATTACH_QUEUE) { tun = tfile->detached; - if (!tun) + if (!tun) { ret = -EINVAL; - else - ret = tun_attach(tun, file); + goto unlock; + } + ret = security_tun_dev_attach_queue(tun->security); + if (ret < 0) + goto unlock; + ret = tun_attach(tun, file); } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { tun = rtnl_dereference(tfile->tun); if (!tun || !(tun->flags & TUN_TAP_MQ)) @@ -1802,6 +1814,7 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) } else ret = -EINVAL; +unlock: rtnl_unlock(); return ret; } diff --git a/include/linux/security.h b/include/linux/security.h index 0f6afc657f77..eee7478cda70 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -989,17 +989,29 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * tells the LSM to decrement the number of secmark labeling rules loaded * @req_classify_flow: * Sets the flow's sid to the openreq sid. + * @tun_dev_alloc_security: + * This hook allows a module to allocate a security structure for a TUN + * device. + * @security pointer to a security structure pointer. + * Returns a zero on success, negative values on failure. + * @tun_dev_free_security: + * This hook allows a module to free the security structure for a TUN + * device. + * @security pointer to the TUN device's security structure * @tun_dev_create: * Check permissions prior to creating a new TUN device. - * @tun_dev_post_create: - * This hook allows a module to update or allocate a per-socket security - * structure. - * @sk contains the newly created sock structure. + * @tun_dev_attach_queue: + * Check permissions prior to attaching to a TUN device queue. + * @security pointer to the TUN device's security structure. * @tun_dev_attach: - * Check permissions prior to attaching to a persistent TUN device. This - * hook can also be used by the module to update any security state + * This hook can be used by the module to update any security state * associated with the TUN device's sock structure. * @sk contains the existing sock structure. + * @security pointer to the TUN device's security structure. + * @tun_dev_open: + * This hook can be used by the module to update any security state + * associated with the TUN device's security structure. + * @security pointer to the TUN devices's security structure. * * Security hooks for XFRM operations. * @@ -1620,9 +1632,12 @@ struct security_operations { void (*secmark_refcount_inc) (void); void (*secmark_refcount_dec) (void); void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl); - int (*tun_dev_create)(void); - void (*tun_dev_post_create)(struct sock *sk); - int (*tun_dev_attach)(struct sock *sk); + int (*tun_dev_alloc_security) (void **security); + void (*tun_dev_free_security) (void *security); + int (*tun_dev_create) (void); + int (*tun_dev_attach_queue) (void *security); + int (*tun_dev_attach) (struct sock *sk, void *security); + int (*tun_dev_open) (void *security); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM @@ -2566,9 +2581,12 @@ void security_inet_conn_established(struct sock *sk, int security_secmark_relabel_packet(u32 secid); void security_secmark_refcount_inc(void); void security_secmark_refcount_dec(void); +int security_tun_dev_alloc_security(void **security); +void security_tun_dev_free_security(void *security); int security_tun_dev_create(void); -void security_tun_dev_post_create(struct sock *sk); -int security_tun_dev_attach(struct sock *sk); +int security_tun_dev_attach_queue(void *security); +int security_tun_dev_attach(struct sock *sk, void *security); +int security_tun_dev_open(void *security); #else /* CONFIG_SECURITY_NETWORK */ static inline int security_unix_stream_connect(struct sock *sock, @@ -2733,16 +2751,31 @@ static inline void security_secmark_refcount_dec(void) { } +static inline int security_tun_dev_alloc_security(void **security) +{ + return 0; +} + +static inline void security_tun_dev_free_security(void *security) +{ +} + static inline int security_tun_dev_create(void) { return 0; } -static inline void security_tun_dev_post_create(struct sock *sk) +static inline int security_tun_dev_attach_queue(void *security) +{ + return 0; +} + +static inline int security_tun_dev_attach(struct sock *sk, void *security) { + return 0; } -static inline int security_tun_dev_attach(struct sock *sk) +static inline int security_tun_dev_open(void *security) { return 0; } diff --git a/security/capability.c b/security/capability.c index 0fe5a026aef8..579775088967 100644 --- a/security/capability.c +++ b/security/capability.c @@ -709,16 +709,31 @@ static void cap_req_classify_flow(const struct request_sock *req, { } +static int cap_tun_dev_alloc_security(void **security) +{ + return 0; +} + +static void cap_tun_dev_free_security(void *security) +{ +} + static int cap_tun_dev_create(void) { return 0; } -static void cap_tun_dev_post_create(struct sock *sk) +static int cap_tun_dev_attach_queue(void *security) +{ + return 0; +} + +static int cap_tun_dev_attach(struct sock *sk, void *security) { + return 0; } -static int cap_tun_dev_attach(struct sock *sk) +static int cap_tun_dev_open(void *security) { return 0; } @@ -1050,8 +1065,11 @@ void __init security_fixup_ops(struct security_operations *ops) set_to_cap_if_null(ops, secmark_refcount_inc); set_to_cap_if_null(ops, secmark_refcount_dec); set_to_cap_if_null(ops, req_classify_flow); + set_to_cap_if_null(ops, tun_dev_alloc_security); + set_to_cap_if_null(ops, tun_dev_free_security); set_to_cap_if_null(ops, tun_dev_create); - set_to_cap_if_null(ops, tun_dev_post_create); + set_to_cap_if_null(ops, tun_dev_open); + set_to_cap_if_null(ops, tun_dev_attach_queue); set_to_cap_if_null(ops, tun_dev_attach); #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/security/security.c b/security/security.c index daa97f4ac9d1..7b88c6aeaed4 100644 --- a/security/security.c +++ b/security/security.c @@ -1254,24 +1254,42 @@ void security_secmark_refcount_dec(void) } EXPORT_SYMBOL(security_secmark_refcount_dec); +int security_tun_dev_alloc_security(void **security) +{ + return security_ops->tun_dev_alloc_security(security); +} +EXPORT_SYMBOL(security_tun_dev_alloc_security); + +void security_tun_dev_free_security(void *security) +{ + security_ops->tun_dev_free_security(security); +} +EXPORT_SYMBOL(security_tun_dev_free_security); + int security_tun_dev_create(void) { return security_ops->tun_dev_create(); } EXPORT_SYMBOL(security_tun_dev_create); -void security_tun_dev_post_create(struct sock *sk) +int security_tun_dev_attach_queue(void *security) { - return security_ops->tun_dev_post_create(sk); + return security_ops->tun_dev_attach_queue(security); } -EXPORT_SYMBOL(security_tun_dev_post_create); +EXPORT_SYMBOL(security_tun_dev_attach_queue); -int security_tun_dev_attach(struct sock *sk) +int security_tun_dev_attach(struct sock *sk, void *security) { - return security_ops->tun_dev_attach(sk); + return security_ops->tun_dev_attach(sk, security); } EXPORT_SYMBOL(security_tun_dev_attach); +int security_tun_dev_open(void *security) +{ + return security_ops->tun_dev_open(security); +} +EXPORT_SYMBOL(security_tun_dev_open); + #endif /* CONFIG_SECURITY_NETWORK */ #ifdef CONFIG_SECURITY_NETWORK_XFRM diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 61a53367d029..ef26e9611ffb 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4399,6 +4399,24 @@ static void selinux_req_classify_flow(const struct request_sock *req, fl->flowi_secid = req->secid; } +static int selinux_tun_dev_alloc_security(void **security) +{ + struct tun_security_struct *tunsec; + + tunsec = kzalloc(sizeof(*tunsec), GFP_KERNEL); + if (!tunsec) + return -ENOMEM; + tunsec->sid = current_sid(); + + *security = tunsec; + return 0; +} + +static void selinux_tun_dev_free_security(void *security) +{ + kfree(security); +} + static int selinux_tun_dev_create(void) { u32 sid = current_sid(); @@ -4414,8 +4432,17 @@ static int selinux_tun_dev_create(void) NULL); } -static void selinux_tun_dev_post_create(struct sock *sk) +static int selinux_tun_dev_attach_queue(void *security) { + struct tun_security_struct *tunsec = security; + + return avc_has_perm(current_sid(), tunsec->sid, SECCLASS_TUN_SOCKET, + TUN_SOCKET__ATTACH_QUEUE, NULL); +} + +static int selinux_tun_dev_attach(struct sock *sk, void *security) +{ + struct tun_security_struct *tunsec = security; struct sk_security_struct *sksec = sk->sk_security; /* we don't currently perform any NetLabel based labeling here and it @@ -4425,20 +4452,19 @@ static void selinux_tun_dev_post_create(struct sock *sk) * cause confusion to the TUN user that had no idea network labeling * protocols were being used */ - /* see the comments in selinux_tun_dev_create() about why we don't use - * the sockcreate SID here */ - - sksec->sid = current_sid(); + sksec->sid = tunsec->sid; sksec->sclass = SECCLASS_TUN_SOCKET; + + return 0; } -static int selinux_tun_dev_attach(struct sock *sk) +static int selinux_tun_dev_open(void *security) { - struct sk_security_struct *sksec = sk->sk_security; + struct tun_security_struct *tunsec = security; u32 sid = current_sid(); int err; - err = avc_has_perm(sid, sksec->sid, SECCLASS_TUN_SOCKET, + err = avc_has_perm(sid, tunsec->sid, SECCLASS_TUN_SOCKET, TUN_SOCKET__RELABELFROM, NULL); if (err) return err; @@ -4446,8 +4472,7 @@ static int selinux_tun_dev_attach(struct sock *sk) TUN_SOCKET__RELABELTO, NULL); if (err) return err; - - sksec->sid = sid; + tunsec->sid = sid; return 0; } @@ -5642,9 +5667,12 @@ static struct security_operations selinux_ops = { .secmark_refcount_inc = selinux_secmark_refcount_inc, .secmark_refcount_dec = selinux_secmark_refcount_dec, .req_classify_flow = selinux_req_classify_flow, + .tun_dev_alloc_security = selinux_tun_dev_alloc_security, + .tun_dev_free_security = selinux_tun_dev_free_security, .tun_dev_create = selinux_tun_dev_create, - .tun_dev_post_create = selinux_tun_dev_post_create, + .tun_dev_attach_queue = selinux_tun_dev_attach_queue, .tun_dev_attach = selinux_tun_dev_attach, + .tun_dev_open = selinux_tun_dev_open, #ifdef CONFIG_SECURITY_NETWORK_XFRM .xfrm_policy_alloc_security = selinux_xfrm_policy_alloc, diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h index 26c7eee1c309..aa47bcabb5f6 100644 --- a/security/selinux/include/objsec.h +++ b/security/selinux/include/objsec.h @@ -110,6 +110,10 @@ struct sk_security_struct { u16 sclass; /* sock security class */ }; +struct tun_security_struct { + u32 sid; /* SID for the tun device sockets */ +}; + struct key_security_struct { u32 sid; /* SID of key */ }; -- cgit From 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 27 Nov 2012 14:09:40 +0000 Subject: PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- drivers/pci/pcie/aspm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index b52630b8eada..8474b6a4fc9b 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -771,6 +771,9 @@ void pcie_clear_aspm(struct pci_bus *bus) { struct pci_dev *child; + if (aspm_force) + return; + /* * Clear any ASPM setup that the firmware has carried out on this bus */ -- cgit From 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:10:59 +0000 Subject: tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 78ea90c40e19..d326d9219aa8 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6950,6 +6950,9 @@ static void tg3_poll_controller(struct net_device *dev) int i; struct tg3 *tp = netdev_priv(dev); + if (tg3_irq_sync(tp)) + return; + for (i = 0; i < tp->irq_cnt; i++) tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]); } @@ -16367,6 +16370,7 @@ static int tg3_init_one(struct pci_dev *pdev, tp->pm_cap = pm_cap; tp->rx_mode = TG3_DEF_RX_MODE; tp->tx_mode = TG3_DEF_TX_MODE; + tp->irq_sync = 1; if (tg3_debug > 0) tp->msg_enable = tg3_debug; -- cgit From daf3ec688e057f6060fb9bb0819feac7a8bbf45c Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:11:00 +0000 Subject: tg3: Fix crc errors on jumbo frame receive TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 58 ++++++++++++++++++++++--------------- 1 file changed, 35 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d326d9219aa8..bdb086934cd9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1283,14 +1283,26 @@ static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set) return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg); } -#define TG3_PHY_AUXCTL_SMDSP_ENABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_SMDSP_ENA | \ - MII_TG3_AUXCTL_ACTL_TX_6DB) +static int tg3_phy_toggle_auxctl_smdsp(struct tg3 *tp, bool enable) +{ + u32 val; + int err; + + err = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val); -#define TG3_PHY_AUXCTL_SMDSP_DISABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_TX_6DB); + if (err) + return err; + if (enable) + + val |= MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + else + val &= ~MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + + err = tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, + val | MII_TG3_AUXCTL_ACTL_TX_6DB); + + return err; +} static int tg3_bmcr_reset(struct tg3 *tp) { @@ -2223,7 +2235,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) otp = tp->phy_otp; - if (TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) + if (tg3_phy_toggle_auxctl_smdsp(tp, true)) return; phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT); @@ -2248,7 +2260,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT); tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) @@ -2284,9 +2296,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) if (!tp->setlpicnt) { if (current_link_up == 1 && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2302,11 +2314,11 @@ static void tg3_phy_eee_enable(struct tg3 *tp) (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || tg3_flag(tp, 57765_CLASS)) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { val = MII_TG3_DSP_TAP26_ALNOKO | MII_TG3_DSP_TAP26_RMRXSTO; tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, val); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2450,7 +2462,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_CTRL1000, CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (err) return err; @@ -2471,7 +2483,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200); tg3_writephy(tp, MII_TG3_DSP_CONTROL, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); tg3_writephy(tp, MII_CTRL1000, phy9_orig); @@ -2572,10 +2584,10 @@ static int tg3_phy_reset(struct tg3 *tp) out: if ((tp->phy_flags & TG3_PHYFLG_ADC_BUG) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x201f, 0x2aaa); tg3_phydsp_write(tp, 0x000a, 0x0323); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } if (tp->phy_flags & TG3_PHYFLG_5704_A0_BUG) { @@ -2584,14 +2596,14 @@ out: } if (tp->phy_flags & TG3_PHYFLG_BER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x000a, 0x310b); tg3_phydsp_write(tp, 0x201f, 0x9506); tg3_phydsp_write(tp, 0x401f, 0x14e2); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } else if (tp->phy_flags & TG3_PHYFLG_JITTER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a); if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) { tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b); @@ -2600,7 +2612,7 @@ out: } else tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } @@ -4009,7 +4021,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) tw32(TG3_CPMU_EEE_MODE, tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (!err) { u32 err2; @@ -4042,7 +4054,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) MII_TG3_DSP_CH34TP2_HIBW01); } - err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + err2 = tg3_phy_toggle_auxctl_smdsp(tp, false); if (!err) err = err2; } -- cgit From 0f3b6849dd55943d915f4b461d7db5e8308d4083 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 12:05:55 +0000 Subject: drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state These are useful for investigating hangs involving WAIT_FOR_EVENT. Signed-off-by: Chris Wilson [danvet: Apply a droplet of Future-Proof in the if-ladder.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 3 +++ drivers/gpu/drm/i915/i915_irq.c | 11 +++++++++++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ 4 files changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index e6a11ca85eaf..7944d301518a 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -641,6 +641,7 @@ static void i915_ring_error_state(struct seq_file *m, seq_printf(m, "%s command stream:\n", ring_str(ring)); seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]); seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]); + seq_printf(m, " CTL: 0x%08x\n", error->ctl[ring]); seq_printf(m, " ACTHD: 0x%08x\n", error->acthd[ring]); seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir[ring]); seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr[ring]); @@ -693,6 +694,8 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, "EIR: 0x%08x\n", error->eir); seq_printf(m, "IER: 0x%08x\n", error->ier); seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake); + seq_printf(m, "DERRMR: 0x%08x\n", error->derrmr); seq_printf(m, "CCID: 0x%08x\n", error->ccid); for (i = 0; i < dev_priv->num_fence_regs; i++) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ed3059575576..12ab3bdea54d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -188,10 +188,13 @@ struct drm_i915_error_state { u32 pgtbl_er; u32 ier; u32 ccid; + u32 derrmr; + u32 forcewake; bool waiting[I915_NUM_RINGS]; u32 pipestat[I915_MAX_PIPES]; u32 tail[I915_NUM_RINGS]; u32 head[I915_NUM_RINGS]; + u32 ctl[I915_NUM_RINGS]; u32 ipeir[I915_NUM_RINGS]; u32 ipehr[I915_NUM_RINGS]; u32 instdone[I915_NUM_RINGS]; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 2220dec3e5d9..fe843389c7b4 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1157,6 +1157,7 @@ static void i915_record_ring_state(struct drm_device *dev, error->acthd[ring->id] = intel_ring_get_active_head(ring); error->head[ring->id] = I915_READ_HEAD(ring); error->tail[ring->id] = I915_READ_TAIL(ring); + error->ctl[ring->id] = I915_READ_CTL(ring); error->cpu_ring_head[ring->id] = ring->head; error->cpu_ring_tail[ring->id] = ring->tail; @@ -1251,6 +1252,16 @@ static void i915_capture_error_state(struct drm_device *dev) else error->ier = I915_READ(IER); + if (INTEL_INFO(dev)->gen >= 6) + error->derrmr = I915_READ(DERRMR); + + if (IS_VALLEYVIEW(dev)) + error->forcewake = I915_READ(FORCEWAKE_VLV); + else if (INTEL_INFO(dev)->gen >= 7) + error->forcewake = I915_READ(FORCEWAKE_MT); + else if (INTEL_INFO(dev)->gen == 6) + error->forcewake = I915_READ(FORCEWAKE); + for_each_pipe(pipe) error->pipestat[pipe] = I915_READ(PIPESTAT(pipe)); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 186ee5c85b51..b401788e1791 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -512,6 +512,8 @@ #define GEN7_ERR_INT 0x44040 #define ERR_INT_MMIO_UNCLAIMED (1<<13) +#define DERRMR 0x44050 + /* GM45+ chicken bits -- debug workaround bits that may be required * for various sorts of correct behavior. The top 16 bits of each are * the enables for writing to the corresponding low bit. -- cgit From 19fc42ed9950d5fe17089c0a928121047c882092 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Jan 2013 11:04:39 -0500 Subject: drm/radeon: clear reset flags if engines are idle Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e0d14e9948e0b1529883a776758117d6f "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html Reported-by: Eldad Zack Tested-by: Eldad Zack Acked-by: Paul Menzel Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 6 ++++++ drivers/gpu/drm/radeon/ni.c | 6 ++++++ drivers/gpu/drm/radeon/r600.c | 6 ++++++ drivers/gpu/drm/radeon/si.c | 6 ++++++ 4 files changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 061fa0a28900..4d0e60adbc6d 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2401,6 +2401,12 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 896f1cbc58a5..59acabb45c9b 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1409,6 +1409,12 @@ static int cayman_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 537e259b3837..3cb9d6089373 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1378,6 +1378,12 @@ static int r600_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct rv515_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 3240a3d64f30..ae8b48205a6c 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2215,6 +2215,12 @@ static int si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; -- cgit From c18b1170493de637eea58671da7df5689ce13491 Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Sat, 12 Jan 2013 04:19:37 +0100 Subject: drm/radeon: allow FP16 color clear registers on r500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/reg_srcs/rv515 | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dff6cf77f953..d9bf96ee299a 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -69,9 +69,10 @@ * 2.26.0 - r600-eg: fix htile size computation * 2.27.0 - r600-SI: Add CS ioctl support for async DMA * 2.28.0 - r600-eg: Add MEM_WRITE packet support + * 2.29.0 - R500 FP16 color clear registers */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 28 +#define KMS_DRIVER_MINOR 29 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515 index 911a8fbd32bb..78d5e99d759d 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/rv515 +++ b/drivers/gpu/drm/radeon/reg_srcs/rv515 @@ -324,6 +324,8 @@ rv515 0x6d40 0x46AC US_OUT_FMT_2 0x46B0 US_OUT_FMT_3 0x46B4 US_W_FMT +0x46C0 RB3D_COLOR_CLEAR_VALUE_AR +0x46C4 RB3D_COLOR_CLEAR_VALUE_GB 0x4BC0 FG_FOG_BLEND 0x4BC4 FG_FOG_FACTOR 0x4BC8 FG_FOG_COLOR_R -- cgit From 5f0839c11e17d8d942ab02626752f95e30a02a4c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 11 Jan 2013 15:19:43 -0500 Subject: drm/radeon: improve semaphore debugging on lockup Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_ring.c | 2 ++ drivers/gpu/drm/radeon/radeon_semaphore.c | 4 ++++ 3 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 34e52304a525..768e8fec0099 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -654,6 +654,8 @@ struct radeon_ring { u32 ptr_reg_mask; u32 nop; u32 idx; + u64 last_semaphore_signal_addr; + u64 last_semaphore_wait_addr; }; /* diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 141f2b6a9cf2..2430d80b1871 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -784,6 +784,8 @@ static int radeon_debugfs_ring_info(struct seq_file *m, void *data) } seq_printf(m, "driver's copy of the wptr: 0x%08x [%5d]\n", ring->wptr, ring->wptr); seq_printf(m, "driver's copy of the rptr: 0x%08x [%5d]\n", ring->rptr, ring->rptr); + seq_printf(m, "last semaphore signal addr : 0x%016llx\n", ring->last_semaphore_signal_addr); + seq_printf(m, "last semaphore wait addr : 0x%016llx\n", ring->last_semaphore_wait_addr); seq_printf(m, "%u free dwords in ring\n", ring->ring_free_dw); seq_printf(m, "%u dwords in ring\n", count); /* print 8 dw before current rptr as often it's the last executed diff --git a/drivers/gpu/drm/radeon/radeon_semaphore.c b/drivers/gpu/drm/radeon/radeon_semaphore.c index 97f3ece81cd2..8dcc20f53d73 100644 --- a/drivers/gpu/drm/radeon/radeon_semaphore.c +++ b/drivers/gpu/drm/radeon/radeon_semaphore.c @@ -95,6 +95,10 @@ int radeon_semaphore_sync_rings(struct radeon_device *rdev, /* we assume caller has already allocated space on waiters ring */ radeon_semaphore_emit_wait(rdev, waiter, semaphore); + /* for debugging lockup only, used by sysfs debug files */ + rdev->ring[signaler].last_semaphore_signal_addr = semaphore->gpu_addr; + rdev->ring[waiter].last_semaphore_wait_addr = semaphore->gpu_addr; + return 0; } -- cgit From ec1287e511320a2c9a02640b7ac02d5d79f56f08 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 15 Jan 2013 10:45:26 -0700 Subject: vfio-pci: Fix buffer overfill A read from a range hidden from the user (ex. MSI-X vector table) attempts to fill the user buffer up to the end of the excluded range instead of up to the requested count. Fix it. Signed-off-by: Alex Williamson Cc: stable@vger.kernel.org --- drivers/vfio/pci/vfio_pci_rdwr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 4362d9e7baa3..f72323ef618f 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -240,17 +240,17 @@ ssize_t vfio_pci_mem_readwrite(struct vfio_pci_device *vdev, char __user *buf, filled = 1; } else { /* Drop writes, fill reads with FF */ + filled = min((size_t)(x_end - pos), count); if (!iswrite) { char val = 0xFF; size_t i; - for (i = 0; i < x_end - pos; i++) { + for (i = 0; i < filled; i++) { if (put_user(val, buf + i)) goto out; } } - filled = x_end - pos; } count -= filled; -- cgit From 6337a23992826e68257fba51267cb6996439520d Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Thu, 22 Nov 2012 10:20:23 +0800 Subject: x86/xen : Fix the wrong check in pciback Fix the wrong check in pciback. Signed-off-by: Yang Zhang Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-pciback/pciback.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h index a7def010eba3..f72af87640e0 100644 --- a/drivers/xen/xen-pciback/pciback.h +++ b/drivers/xen/xen-pciback/pciback.h @@ -124,7 +124,7 @@ static inline int xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev, static inline void xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev, struct pci_dev *dev) { - if (xen_pcibk_backend && xen_pcibk_backend->free) + if (xen_pcibk_backend && xen_pcibk_backend->release) return xen_pcibk_backend->release(pdev, dev); } -- cgit From d0b4d64aadb9f4a90669848de9ef3819050a98cd Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Tue, 15 Jan 2013 13:21:27 +0000 Subject: xen/grant-table: correctly initialize grant table version 1 Commit 85ff6acb075a484780b3d763fdf41596d8fc0970 (xen/granttable: Grant tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from a constant to a conditional expression. The expression depends on grant_table_version being appropriately set. Unfortunately, at init time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME conditional expression checks for "grant_table_version == 1", and therefore returns the number of grant references per frame for v2. This causes gnttab_init() to allocate fewer pages for gnttab_list, as a frame can old half the number of v2 entries than v1 entries. After gnttab_resume() is called, grant_table_version is appropriately set. nr_init_grefs will then be miscalculated and gnttab_free_count will hold a value larger than the actual number of free gref entries. If a guest is heavily utilizing improperly initialized v1 grant tables, memory corruption can occur. One common manifestation is corruption of the vmalloc list, resulting in a poisoned pointer derefrence when accessing /proc/meminfo or /proc/vmallocinfo: [ 40.770064] BUG: unable to handle kernel paging request at 0000200200001407 [ 40.770083] IP: [] get_vmalloc_info+0x70/0x110 [ 40.770102] PGD 0 [ 40.770107] Oops: 0000 [#1] SMP [ 40.770114] CPU 10 This patch introduces a static variable, grefs_per_grant_frame, to cache the calculated value. gnttab_init() now calls gnttab_request_version() early so that grant_table_version and grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have been added to prevent this type of bug from reoccurring in the future. Signed-off-by: Matt Wilson Reviewed-and-Tested-by: Steven Noonan Acked-by: Ian Campbell Cc: Konrad Rzeszutek Wilk Cc: Annie Li Cc: xen-devel@lists.xen.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.3 and newer Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/grant-table.c | 48 ++++++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index b91f14e83164..95ce9d02ceca 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -56,10 +56,6 @@ /* External tools reserve first few grant table entries. */ #define NR_RESERVED_ENTRIES 8 #define GNTTAB_LIST_END 0xffffffff -#define GREFS_PER_GRANT_FRAME \ -(grant_table_version == 1 ? \ -(PAGE_SIZE / sizeof(struct grant_entry_v1)) : \ -(PAGE_SIZE / sizeof(union grant_entry_v2))) static grant_ref_t **gnttab_list; static unsigned int nr_grant_frames; @@ -154,6 +150,7 @@ static struct gnttab_ops *gnttab_interface; static grant_status_t *grstatus; static int grant_table_version; +static int grefs_per_grant_frame; static struct gnttab_free_callback *gnttab_free_callback_list; @@ -767,12 +764,14 @@ static int grow_gnttab_list(unsigned int more_frames) unsigned int new_nr_grant_frames, extra_entries, i; unsigned int nr_glist_frames, new_nr_glist_frames; + BUG_ON(grefs_per_grant_frame == 0); + new_nr_grant_frames = nr_grant_frames + more_frames; - extra_entries = more_frames * GREFS_PER_GRANT_FRAME; + extra_entries = more_frames * grefs_per_grant_frame; - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; new_nr_glist_frames = - (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + (new_nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = nr_glist_frames; i < new_nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC); if (!gnttab_list[i]) @@ -780,12 +779,12 @@ static int grow_gnttab_list(unsigned int more_frames) } - for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames; - i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++) + for (i = grefs_per_grant_frame * nr_grant_frames; + i < grefs_per_grant_frame * new_nr_grant_frames - 1; i++) gnttab_entry(i) = i + 1; gnttab_entry(i) = gnttab_free_head; - gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames; + gnttab_free_head = grefs_per_grant_frame * nr_grant_frames; gnttab_free_count += extra_entries; nr_grant_frames = new_nr_grant_frames; @@ -957,7 +956,8 @@ EXPORT_SYMBOL_GPL(gnttab_unmap_refs); static unsigned nr_status_frames(unsigned nr_grant_frames) { - return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP; + BUG_ON(grefs_per_grant_frame == 0); + return (nr_grant_frames * grefs_per_grant_frame + SPP - 1) / SPP; } static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) @@ -1115,6 +1115,7 @@ static void gnttab_request_version(void) rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1); if (rc == 0 && gsv.version == 2) { grant_table_version = 2; + grefs_per_grant_frame = PAGE_SIZE / sizeof(union grant_entry_v2); gnttab_interface = &gnttab_v2_ops; } else if (grant_table_version == 2) { /* @@ -1127,17 +1128,17 @@ static void gnttab_request_version(void) panic("we need grant tables version 2, but only version 1 is available"); } else { grant_table_version = 1; + grefs_per_grant_frame = PAGE_SIZE / sizeof(struct grant_entry_v1); gnttab_interface = &gnttab_v1_ops; } printk(KERN_INFO "Grant tables using version %d layout.\n", grant_table_version); } -int gnttab_resume(void) +static int gnttab_setup(void) { unsigned int max_nr_gframes; - gnttab_request_version(); max_nr_gframes = gnttab_max_grant_frames(); if (max_nr_gframes < nr_grant_frames) return -ENOSYS; @@ -1160,6 +1161,12 @@ int gnttab_resume(void) return 0; } +int gnttab_resume(void) +{ + gnttab_request_version(); + return gnttab_setup(); +} + int gnttab_suspend(void) { gnttab_interface->unmap_frames(); @@ -1171,9 +1178,10 @@ static int gnttab_expand(unsigned int req_entries) int rc; unsigned int cur, extra; + BUG_ON(grefs_per_grant_frame == 0); cur = nr_grant_frames; - extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) / - GREFS_PER_GRANT_FRAME); + extra = ((req_entries + (grefs_per_grant_frame-1)) / + grefs_per_grant_frame); if (cur + extra > gnttab_max_grant_frames()) return -ENOSPC; @@ -1191,21 +1199,23 @@ int gnttab_init(void) unsigned int nr_init_grefs; int ret; + gnttab_request_version(); nr_grant_frames = 1; boot_max_nr_grant_frames = __max_nr_grant_frames(); /* Determine the maximum number of frames required for the * grant reference free list on the current hypervisor. */ + BUG_ON(grefs_per_grant_frame == 0); max_nr_glist_frames = (boot_max_nr_grant_frames * - GREFS_PER_GRANT_FRAME / RPP); + grefs_per_grant_frame / RPP); gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *), GFP_KERNEL); if (gnttab_list == NULL) return -ENOMEM; - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = 0; i < nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL); if (gnttab_list[i] == NULL) { @@ -1214,12 +1224,12 @@ int gnttab_init(void) } } - if (gnttab_resume() < 0) { + if (gnttab_setup() < 0) { ret = -ENODEV; goto ini_nomem; } - nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME; + nr_init_grefs = nr_grant_frames * grefs_per_grant_frame; for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++) gnttab_entry(i) = i + 1; -- cgit From e5c702d3b268066dc70d619ecff06a08065f343f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 15 Jan 2013 13:31:43 +0000 Subject: Xen: properly bound buffer access when parsing cpu/*/availability At the same time reduce the local buffers to 16 bytes each. Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/cpu_hotplug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c index 4dcfced107f5..084041d42c9a 100644 --- a/drivers/xen/cpu_hotplug.c +++ b/drivers/xen/cpu_hotplug.c @@ -25,10 +25,10 @@ static void disable_hotplug_cpu(int cpu) static int vcpu_online(unsigned int cpu) { int err; - char dir[32], state[32]; + char dir[16], state[16]; sprintf(dir, "cpu/%u", cpu); - err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state); + err = xenbus_scanf(XBT_NIL, dir, "availability", "%15s", state); if (err != 1) { if (!xen_initial_domain()) printk(KERN_ERR "XENBUS: Unable to read cpu state\n"); -- cgit From 99beae6cb8f4dd5dab81a370b79c3b1085848d89 Mon Sep 17 00:00:00 2001 From: Andres Lagar-Cavilla Date: Mon, 14 Jan 2013 22:35:40 -0500 Subject: xen/privcmd: Fix mmap batch ioctl. 1. If any individual mapping error happens, the V1 case will mark *all* operations as failed. Fixed. 2. The err_array was allocated with kcalloc, resulting in potentially O(n) page allocations. Refactor code to not use this array. Signed-off-by: Andres Lagar-Cavilla Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 83 +++++++++++++++++++++++++++++---------------------- 1 file changed, 47 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 421375a9196a..ca2b00e9d558 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -258,11 +258,12 @@ struct mmap_batch_state { * -ENOENT if at least 1 -ENOENT has happened. */ int global_error; - /* An array for individual errors */ - int *err; + int version; /* User-space mfn array to store errors in the second pass for V1. */ xen_pfn_t __user *user_mfn; + /* User-space int array to store errors in the second pass for V2. */ + int __user *user_err; }; /* auto translated dom0 note: if domU being created is PV, then mfn is @@ -285,7 +286,19 @@ static int mmap_batch_fn(void *data, void *state) &cur_page); /* Store error code for second pass. */ - *(st->err++) = ret; + if (st->version == 1) { + if (ret < 0) { + /* + * V1 encodes the error codes in the 32bit top nibble of the + * mfn (with its known limitations vis-a-vis 64 bit callers). + */ + *mfnp |= (ret == -ENOENT) ? + PRIVCMD_MMAPBATCH_PAGED_ERROR : + PRIVCMD_MMAPBATCH_MFN_ERROR; + } + } else { /* st->version == 2 */ + *((int *) mfnp) = ret; + } /* And see if it affects the global_error. */ if (ret < 0) { @@ -302,20 +315,25 @@ static int mmap_batch_fn(void *data, void *state) return 0; } -static int mmap_return_errors_v1(void *data, void *state) +static int mmap_return_errors(void *data, void *state) { - xen_pfn_t *mfnp = data; struct mmap_batch_state *st = state; - int err = *(st->err++); - /* - * V1 encodes the error codes in the 32bit top nibble of the - * mfn (with its known limitations vis-a-vis 64 bit callers). - */ - *mfnp |= (err == -ENOENT) ? - PRIVCMD_MMAPBATCH_PAGED_ERROR : - PRIVCMD_MMAPBATCH_MFN_ERROR; - return __put_user(*mfnp, st->user_mfn++); + if (st->version == 1) { + xen_pfn_t mfnp = *((xen_pfn_t *) data); + if (mfnp & PRIVCMD_MMAPBATCH_MFN_ERROR) + return __put_user(mfnp, st->user_mfn++); + else + st->user_mfn++; + } else { /* st->version == 2 */ + int err = *((int *) data); + if (err) + return __put_user(err, st->user_err++); + else + st->user_err++; + } + + return 0; } /* Allocate pfns that are then mapped with gmfns from foreign domid. Update @@ -354,7 +372,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) struct vm_area_struct *vma; unsigned long nr_pages; LIST_HEAD(pagelist); - int *err_array = NULL; struct mmap_batch_state state; switch (version) { @@ -390,10 +407,12 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) goto out; } - err_array = kcalloc(m.num, sizeof(int), GFP_KERNEL); - if (err_array == NULL) { - ret = -ENOMEM; - goto out; + if (version == 2) { + /* Zero error array now to only copy back actual errors. */ + if (clear_user(m.err, sizeof(int) * m.num)) { + ret = -EFAULT; + goto out; + } } down_write(&mm->mmap_sem); @@ -421,7 +440,7 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) state.va = m.addr; state.index = 0; state.global_error = 0; - state.err = err_array; + state.version = version; /* mmap_batch_fn guarantees ret == 0 */ BUG_ON(traverse_pages(m.num, sizeof(xen_pfn_t), @@ -429,21 +448,14 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) up_write(&mm->mmap_sem); - if (version == 1) { - if (state.global_error) { - /* Write back errors in second pass. */ - state.user_mfn = (xen_pfn_t *)m.arr; - state.err = err_array; - ret = traverse_pages(m.num, sizeof(xen_pfn_t), - &pagelist, mmap_return_errors_v1, &state); - } else - ret = 0; - - } else if (version == 2) { - ret = __copy_to_user(m.err, err_array, m.num * sizeof(int)); - if (ret) - ret = -EFAULT; - } + if (state.global_error) { + /* Write back errors in second pass. */ + state.user_mfn = (xen_pfn_t *)m.arr; + state.user_err = m.err; + ret = traverse_pages(m.num, sizeof(xen_pfn_t), + &pagelist, mmap_return_errors, &state); + } else + ret = 0; /* If we have not had any EFAULT-like global errors then set the global * error to -ENOENT if necessary. */ @@ -451,7 +463,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) ret = -ENOENT; out: - kfree(err_array); free_page_list(&pagelist); return ret; -- cgit From 2512f298cb9886e06938e761c9e924c8448d9ab8 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:11 +0000 Subject: xen/gntdev: fix unsafe vma access In gntdev_ioctl_get_offset_for_vaddr, we need to hold mmap_sem while calling find_vma() to avoid potentially having the result freed out from under us. Similarly, the MMU notifier functions need to synchronize with gntdev_vma_close to avoid map->vma being freed during their iteration. Signed-off-by: Daniel De Graaf Reported-by: Al Viro Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 2e22df2f7a3f..cca62cc8549b 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -378,7 +378,20 @@ static void gntdev_vma_close(struct vm_area_struct *vma) struct grant_map *map = vma->vm_private_data; pr_debug("gntdev_vma_close %p\n", vma); - map->vma = NULL; + if (use_ptemod) { + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; + /* It is possible that an mmu notifier could be running + * concurrently, so take priv->lock to ensure that the vma won't + * vanishing during the unmap_grant_pages call, since we will + * spin here until that completes. Such a concurrent call will + * not do any unmapping, since that has been done prior to + * closing the vma, but it may still iterate the unmap_ops list. + */ + spin_lock(&priv->lock); + map->vma = NULL; + spin_unlock(&priv->lock); + } vma->vm_private_data = NULL; gntdev_put_map(map); } @@ -579,25 +592,31 @@ static long gntdev_ioctl_get_offset_for_vaddr(struct gntdev_priv *priv, struct ioctl_gntdev_get_offset_for_vaddr op; struct vm_area_struct *vma; struct grant_map *map; + int rv = -EINVAL; if (copy_from_user(&op, u, sizeof(op)) != 0) return -EFAULT; pr_debug("priv %p, offset for vaddr %lx\n", priv, (unsigned long)op.vaddr); + down_read(¤t->mm->mmap_sem); vma = find_vma(current->mm, op.vaddr); if (!vma || vma->vm_ops != &gntdev_vmops) - return -EINVAL; + goto out_unlock; map = vma->vm_private_data; if (!map) - return -EINVAL; + goto out_unlock; op.offset = map->index << PAGE_SHIFT; op.count = map->count; + rv = 0; - if (copy_to_user(u, &op, sizeof(op)) != 0) + out_unlock: + up_read(¤t->mm->mmap_sem); + + if (rv == 0 && copy_to_user(u, &op, sizeof(op)) != 0) return -EFAULT; - return 0; + return rv; } static long gntdev_ioctl_notify(struct gntdev_priv *priv, void __user *u) -- cgit From 16a1d0225e22e4e273e6b60a21db95decde666c2 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:12 +0000 Subject: xen/gntdev: correctly unmap unlinked maps in mmu notifier If gntdev_ioctl_unmap_grant_ref is called on a range before unmapping it, the entry is removed from priv->maps and the later call to mn_invl_range_start won't find it to do the unmapping. Fix this by creating another list of freeable maps that the mmu notifier can search and use to unmap grants. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 92 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 63 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index cca62cc8549b..9be3e5e46d1f 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -56,10 +56,15 @@ MODULE_PARM_DESC(limit, "Maximum number of grants that may be mapped by " static atomic_t pages_mapped = ATOMIC_INIT(0); static int use_ptemod; +#define populate_freeable_maps use_ptemod struct gntdev_priv { + /* maps with visible offsets in the file descriptor */ struct list_head maps; - /* lock protects maps from concurrent changes */ + /* maps that are not visible; will be freed on munmap. + * Only populated if populate_freeable_maps == 1 */ + struct list_head freeable_maps; + /* lock protects maps and freeable_maps */ spinlock_t lock; struct mm_struct *mm; struct mmu_notifier mn; @@ -193,7 +198,7 @@ static struct grant_map *gntdev_find_map_index(struct gntdev_priv *priv, return NULL; } -static void gntdev_put_map(struct grant_map *map) +static void gntdev_put_map(struct gntdev_priv *priv, struct grant_map *map) { if (!map) return; @@ -208,6 +213,12 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } + if (populate_freeable_maps && priv) { + spin_lock(&priv->lock); + list_del(&map->next); + spin_unlock(&priv->lock); + } + if (map->pages && !use_ptemod) unmap_grant_pages(map, 0, map->count); gntdev_free_map(map); @@ -376,11 +387,11 @@ static void gntdev_vma_open(struct vm_area_struct *vma) static void gntdev_vma_close(struct vm_area_struct *vma) { struct grant_map *map = vma->vm_private_data; + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; pr_debug("gntdev_vma_close %p\n", vma); if (use_ptemod) { - struct file *file = vma->vm_file; - struct gntdev_priv *priv = file->private_data; /* It is possible that an mmu notifier could be running * concurrently, so take priv->lock to ensure that the vma won't * vanishing during the unmap_grant_pages call, since we will @@ -393,7 +404,7 @@ static void gntdev_vma_close(struct vm_area_struct *vma) spin_unlock(&priv->lock); } vma->vm_private_data = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); } static struct vm_operations_struct gntdev_vmops = { @@ -403,33 +414,43 @@ static struct vm_operations_struct gntdev_vmops = { /* ------------------------------------------------------------------ */ +static void unmap_if_in_range(struct grant_map *map, + unsigned long start, unsigned long end) +{ + unsigned long mstart, mend; + int err; + + if (!map->vma) + return; + if (map->vma->vm_start >= end) + return; + if (map->vma->vm_end <= start) + return; + mstart = max(start, map->vma->vm_start); + mend = min(end, map->vma->vm_end); + pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end, + start, end, mstart, mend); + err = unmap_grant_pages(map, + (mstart - map->vma->vm_start) >> PAGE_SHIFT, + (mend - mstart) >> PAGE_SHIFT); + WARN_ON(err); +} + static void mn_invl_range_start(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long start, unsigned long end) { struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn); struct grant_map *map; - unsigned long mstart, mend; - int err; spin_lock(&priv->lock); list_for_each_entry(map, &priv->maps, next) { - if (!map->vma) - continue; - if (map->vma->vm_start >= end) - continue; - if (map->vma->vm_end <= start) - continue; - mstart = max(start, map->vma->vm_start); - mend = min(end, map->vma->vm_end); - pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", - map->index, map->count, - map->vma->vm_start, map->vma->vm_end, - start, end, mstart, mend); - err = unmap_grant_pages(map, - (mstart - map->vma->vm_start) >> PAGE_SHIFT, - (mend - mstart) >> PAGE_SHIFT); - WARN_ON(err); + unmap_if_in_range(map, start, end); + } + list_for_each_entry(map, &priv->freeable_maps, next) { + unmap_if_in_range(map, start, end); } spin_unlock(&priv->lock); } @@ -458,6 +479,15 @@ static void mn_release(struct mmu_notifier *mn, err = unmap_grant_pages(map, /* offset */ 0, map->count); WARN_ON(err); } + list_for_each_entry(map, &priv->freeable_maps, next) { + if (!map->vma) + continue; + pr_debug("map %d+%d (%lx %lx)\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end); + err = unmap_grant_pages(map, /* offset */ 0, map->count); + WARN_ON(err); + } spin_unlock(&priv->lock); } @@ -479,6 +509,7 @@ static int gntdev_open(struct inode *inode, struct file *flip) return -ENOMEM; INIT_LIST_HEAD(&priv->maps); + INIT_LIST_HEAD(&priv->freeable_maps); spin_lock_init(&priv->lock); if (use_ptemod) { @@ -513,8 +544,9 @@ static int gntdev_release(struct inode *inode, struct file *flip) while (!list_empty(&priv->maps)) { map = list_entry(priv->maps.next, struct grant_map, next); list_del(&map->next); - gntdev_put_map(map); + gntdev_put_map(NULL /* already removed */, map); } + WARN_ON(!list_empty(&priv->freeable_maps)); if (use_ptemod) mmu_notifier_unregister(&priv->mn, priv->mm); @@ -542,14 +574,14 @@ static long gntdev_ioctl_map_grant_ref(struct gntdev_priv *priv, if (unlikely(atomic_add_return(op.count, &pages_mapped) > limit)) { pr_debug("can't map: over limit\n"); - gntdev_put_map(map); + gntdev_put_map(NULL, map); return err; } if (copy_from_user(map->grants, &u->refs, sizeof(map->grants[0]) * op.count) != 0) { - gntdev_put_map(map); - return err; + gntdev_put_map(NULL, map); + return -EFAULT; } spin_lock(&priv->lock); @@ -578,11 +610,13 @@ static long gntdev_ioctl_unmap_grant_ref(struct gntdev_priv *priv, map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count); if (map) { list_del(&map->next); + if (populate_freeable_maps) + list_add_tail(&map->next, &priv->freeable_maps); err = 0; } spin_unlock(&priv->lock); if (map) - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } @@ -797,7 +831,7 @@ out_unlock_put: out_put_map: if (use_ptemod) map->vma = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } -- cgit From 1affa98d23c0188fdd4433512489be753a25bb23 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 17:57:13 -0500 Subject: xen/gntdev: remove erronous use of copy_to_user Since there is now a mapping of granted pages in kernel address space in both PV and HVM, use it for UNMAP_NOTIFY_CLEAR_BYTE instead of accessing memory via copy_to_user and triggering sleep-in-atomic warnings. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 9be3e5e46d1f..3c8803feba26 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -312,17 +312,10 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) { int pgno = (map->notify.addr >> PAGE_SHIFT); - if (pgno >= offset && pgno < offset + pages && use_ptemod) { - void __user *tmp = (void __user *) - map->vma->vm_start + map->notify.addr; - err = copy_to_user(tmp, &err, 1); - if (err) - return -EFAULT; - map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; - } else if (pgno >= offset && pgno < offset + pages) { - uint8_t *tmp = kmap(map->pages[pgno]); + if (pgno >= offset && pgno < offset + pages) { + /* No need for kmap, pages are in lowmem */ + uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno])); tmp[map->notify.addr & (PAGE_SIZE-1)] = 0; - kunmap(map->pages[pgno]); map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; } } -- cgit From a6833214cfc6fa8a7c59426af77794cc190c6cfc Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Thu, 13 Dec 2012 14:27:43 +0100 Subject: mxs: uart: fix setting RTS from software With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the mainline mxs-uart driver now sets RTSEN only when hardware flow control is enabled via software. It is not possible any longer to set RTS manually via software. However, the manual modification is a valid operation. Regain the possibility to set RTS via software and only set RTSEN when hardware flow control is explicitly enabled via settermios cflag CRTSCTS. Signed-off-by: Steffen Trumtrar Cc: stable Reviewed-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b035efe..9f63f8890a61 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl; -- cgit From 87b8bed2ce9394870a87e4fb2aef6752b2bd837d Mon Sep 17 00:00:00 2001 From: "fabio.estevam@freescale.com" Date: Mon, 7 Jan 2013 23:11:06 -0200 Subject: serial: mxs-auart: Index is unsigned Fix the following warning when building with W=1 option: drivers/tty/serial/mxs-auart.c: In function 'mxs_auart_tx_chars': drivers/tty/serial/mxs-auart.c:272:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 9f63f8890a61..e55615eb34ad 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) struct circ_buf *xmit = &s->port.state->xmit; if (auart_dma_enabled(s)) { - int i = 0; + u32 i = 0; int size; void *buffer = s->tx_dma_buf; -- cgit From a6dd114e16cbc4410049a90a8a67b967333d108d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Dec 2012 05:10:44 -0500 Subject: tty: serial: vt8500: fix return value check in vt8500_serial_probe() In case of error, function of_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Tony Prisk Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/vt8500_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 8fd181436a6b..d5ed9f613005 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); - if (vt8500_port->clk) { + if (!IS_ERR(vt8500_port->clk)) { vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); } else { /* use the default of 24Mhz if not specified and warn */ -- cgit From 4f7d67d0de0f0728ed258426a62ab555191cdfc8 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:58 -0600 Subject: tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26b9dc012ed0..bf2f1a0b9ae7 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2246,7 +2246,7 @@ static struct pciserial_board pci_boards[] = { [pbn_b0_8_1152000_200] = { .flags = FL_BASE0, - .num_ports = 2, + .num_ports = 8, .base_baud = 1152000, .uart_offset = 0x200, }, -- cgit From b7b9041b208d09c114d9d30ff1b7f860b7765f45 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:59 -0600 Subject: tty/8250: The correct device id for this card is 0x0022 The correct device id for this card is 0x0022 Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index bf2f1a0b9ae7..8a2c3d934187 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1301,9 +1301,9 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_VENDOR_ID_ASIX 0x9710 -#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019 #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ -- cgit From 014b9b4ce84281ccb3d723c792bed19815f3571a Mon Sep 17 00:00:00 2001 From: chao bi Date: Wed, 12 Dec 2012 11:40:56 +0800 Subject: serial:ifx6x60:Delete SPI timer when shut down port When shut down SPI port, it's possible that MRDY has been asserted and a SPI timer was activated waiting for SRDY assert, in the case, it needs to delete this timer. Signed-off-by: Chen Jun Signed-off-by: channing Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 675d94ab0aff..7eed3235dad4 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port) clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); mrdy_set_low(ifx_dev); + del_timer(&ifx_dev->spi_timer); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); tasklet_kill(&ifx_dev->io_work_tasklet); } -- cgit From 2eaa865ffd66ca2e5a841e8c756d75f89e3482ae Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Mon, 31 Dec 2012 13:42:45 -0800 Subject: serial: samsung: remove redundant setting of line config during port reset The setting of uart line control configuration in s3c24xx_serial_resetport is can be removed since the 'set_termios' call will overwrite any ULCON register setting which s3c24xx_serial_resetport does. Acked-by: Kukjin Kim Signed-off-by: Thomas Abraham Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12e5249d053e..e514b3a4dc57 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); -- cgit From 68e56cb3a068f9c30971c6117fbbd1e32918e49e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jan 2013 20:09:26 +0100 Subject: tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler Signed-off-by: Maxime Ripard Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1d0dba2d562d..096d2ef48b32 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p) } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { /* Clear the USR and write the LCR again. */ (void)p->serial_in(p, UART_USR); - p->serial_out(p, d->last_lcr, UART_LCR); + p->serial_out(p, UART_LCR, d->last_lcr); return 1; } -- cgit From 5dd070d21e2cb34b4162d564d73cca3591f94389 Mon Sep 17 00:00:00 2001 From: channing Date: Wed, 16 Jan 2013 13:14:20 +0800 Subject: serial:ifx6x60:Keep word size accordance with SPI controller As protocol driver, IFX SPI driver initiate to setup SPI master with default SPI word size as 16 bit/word, however, SPI master may not adopt this default value due to SPI controller's capability, it might choose an available value by itself and set it to spi_device.bits_per_word. In order to keep align with Controller, IFX driver should make use of this value during SPI transfer, but the default one. Signed-off-by: Chen Jun Signed-off-by: channing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 7eed3235dad4..8cb6d8d66a13 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -811,7 +811,8 @@ static void ifx_spi_io(unsigned long data) ifx_dev->spi_xfer.cs_change = 0; ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_bpw; + ifx_dev->spi_xfer.bits_per_word = + ifx_dev->spi_dev->bits_per_word; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; -- cgit From 86833f0a57c3d5f3ed8bba465369c15c831d3909 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 8 Dec 2012 09:04:25 +0000 Subject: ixgbe: only compile ixgbe_debugfs.o when enabled This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/Makefile | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c | 5 ----- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index f3a632bf8d96..687c83d1bdab 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o -ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o ixgbe_debugfs.o\ +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o @@ -40,4 +40,5 @@ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o +ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 50aa546b8c7a..3504686d3af5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -24,9 +24,6 @@ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ - -#ifdef CONFIG_DEBUG_FS - #include #include @@ -277,5 +274,3 @@ void ixgbe_dbg_exit(void) { debugfs_remove_recursive(ixgbe_dbg_root); } - -#endif /* CONFIG_DEBUG_FS */ -- cgit From 20fc4c42b2bed2dffc8e51f24645603f05b2bcef Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:53:38 +0000 Subject: ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a751c9d09c4..bb9256a1b0a9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -660,11 +660,11 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: -- cgit From f30d26e468322b50d5e376bec40658683aff8ece Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 16 Jan 2013 10:53:40 +0200 Subject: drm/i915/eDP: do not write power sequence registers for ghost eDP Some machines detect an eDP port even if it's not really there, and eDP initialization has a fail path for this. Typically such machines have an LVDS display instead. A regression introduced in commit 82ed61fa1a4e08d5f9e86fb1b715b50ed678b6ac Author: Daniel Vetter Date: Sat Oct 20 20:57:41 2012 +0200 drm/i915: make edp panel power sequence setup more robust updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS, and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display. Split the power sequencer initialization into two, delaying the register updates until after we know the eDP is real. Note: Keep the PP_CONTROL unlocking in the first part, even if it does not update registers, per the commit message of the above mentioned commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601 Reported-and-tested-by: Ryan Coe Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 47 ++++++++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1b63d55318a0..fb3715b4b09d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2579,7 +2579,8 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, - struct intel_dp *intel_dp) + struct intel_dp *intel_dp, + struct edp_power_seq *out) { struct drm_i915_private *dev_priv = dev->dev_private; struct edp_power_seq cur, vbt, spec, final; @@ -2650,16 +2651,35 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, intel_dp->panel_power_cycle_delay = get_delay(t11_t12); #undef get_delay + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + if (out) + *out = final; +} + +static void +intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *seq) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on, pp_off, pp_div; + /* And finally store the new values in the power sequencer. */ - pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | - (final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT); - pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | - (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT); + pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | + (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); /* Compute the divisor for the pp clock, simply match the Bspec * formula. */ pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; - pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000) + pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) << PANEL_POWER_CYCLE_DELAY_SHIFT); /* Haswell doesn't have any port selection bits for the panel @@ -2675,14 +2695,6 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, I915_WRITE(PCH_PP_OFF_DELAYS, pp_off); I915_WRITE(PCH_PP_DIVISOR, pp_div); - - DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", - intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, - intel_dp->panel_power_cycle_delay); - - DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", - intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", I915_READ(PCH_PP_ON_DELAYS), I915_READ(PCH_PP_OFF_DELAYS), @@ -2699,6 +2711,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; + struct edp_power_seq power_seq = { 0 }; enum port port = intel_dig_port->port; const char *name = NULL; int type; @@ -2771,7 +2784,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, } if (is_edp(intel_dp)) - intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); intel_dp_i2c_init(intel_dp, intel_connector, name); @@ -2798,6 +2811,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, return; } + /* We now know it's not a ghost, init power sequence regs. */ + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + ironlake_edp_panel_vdd_on(intel_dp); edid = drm_get_edid(connector, &intel_dp->adapter); if (edid) { -- cgit From 262b6d363fcff16359c93bd58c297f961f6e6273 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 16:17:54 +0000 Subject: drm/i915: Invalidate the relocation presumed_offsets along the slow path In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4 Author: Chris Wilson Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index d6a994a07393..26d08bb58218 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -539,6 +539,8 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, total = 0; for (i = 0; i < count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; + u64 invalid_offset = (u64)-1; + int j; user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr; @@ -549,6 +551,25 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, goto err; } + /* As we do not update the known relocation offsets after + * relocating (due to the complexities in lock handling), + * we need to mark them as invalid now so that we force the + * relocation processing next time. Just in case the target + * object is evicted and then rebound into its old + * presumed_offset before the next execbuffer - if that + * happened we would make the mistake of assuming that the + * relocations were valid. + */ + for (j = 0; j < exec[i].relocation_count; j++) { + if (copy_to_user(&user_relocs[j].presumed_offset, + &invalid_offset, + sizeof(invalid_offset))) { + ret = -EFAULT; + mutex_lock(&dev->struct_mutex); + goto err; + } + } + reloc_offset[i] = total; total += exec[i].relocation_count; } -- cgit From c3e5d7181afb66657393066bccce0956fab09ab3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Jan 2013 10:20:36 +0200 Subject: iwlwifi: audit single frames from AGG queue in RS The rate scaling won't treat the information in a frame with IEEE80211_TX_CTL_AMPDU set if IEEE80211_TX_STAT_AMPDU is cleared. But all the frames coming from an AGG tx queue have IEEE80211_TX_CTL_AMPDU set, and IEEE80211_TX_STAT_AMPDU is set only if the frame was sent in an AMPDU. This means that all the data in frames in AGG tx queues that aren't sent as an AMPDU is thrown away. This is even more harmful when in bad link conditions, the frames are sent in an AMPDU and then finally sent as single frame. So a lot of failures weren't reported and the rate scaling got stuck in high rates leading to very poor connectivity. Fix that by clearing IEEE80211_TX_CTL_AMPDU when the frame isn't part of an AMPDU. This bug was introduced by 2eb81a40aa521035ff9c8c8309e482dff523f8c9 iwlwifi: don't clear CTL_AMPDU on frame status This fix basically reverts the aforementioned commit. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a790599fe2c2..31534f7c0548 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1079,6 +1079,8 @@ static void iwlagn_set_tx_status(struct iwl_priv *priv, { u16 status = le16_to_cpu(tx_resp->status.status); + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_tx_status_to_mac80211(status); iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), -- cgit From f32ca3db7f0b05a88edf37ccb00e262290a213e7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 17 Jan 2013 00:33:36 +0900 Subject: regmap: debugfs: Fix seeking from the cache We don't want to bomb out early if we failed to get the cache any more, just soldier on instead and we won't get confused and always return the first block. Reported-by: Philipp Zabel --- drivers/base/regmap/regmap-debugfs.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 46a213a596e2..d9a6c94ce423 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -121,8 +121,6 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, c->max = p - 1; list_add_tail(&c->list, &map->debugfs_off_cache); - } else { - return base; } /* -- cgit From d4fc9dc200acc339370e22a0578725e8fb45da0d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 15 Jan 2013 05:15:10 +0000 Subject: cxgb4: set coalesce parameters on all queues The coalesce parameters was set only on the first queue, which caused interrupt rates to be larger on all the other queues. This patch allows interrupt rates to be reduced for certain workloads and colaesce parameters by 41%. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: steved@us.ibm.com Cc: toml@us.ibm.com Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index f0718e1a8369..c306df7d4568 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -1994,9 +1994,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { const struct port_info *pi = netdev_priv(dev); struct adapter *adap = pi->adapter; - - return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq, - c->rx_coalesce_usecs, c->rx_max_coalesced_frames); + struct sge_rspq *q; + int i; + int r = 0; + + for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++) { + q = &adap->sge.ethrxq[i].rspq; + r = set_rxq_intr_params(adap, q, c->rx_coalesce_usecs, + c->rx_max_coalesced_frames); + if (r) { + dev_err(&dev->dev, "failed to set coalesce %d\n", r); + break; + } + } + return r; } static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) -- cgit From 1b9c3a1bfbf17b5713bf7e6d74254e0c879ac4a0 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 14 Jan 2013 19:39:01 +0000 Subject: usbnet: dm9601: Fix incorrect command commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS command. The distiction is reintroduced to the driver so that the functionality of the driver remains same. CC: Ming Lei Signed-off-by: Tushar Behera Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 3f554c1149f3..011410f39c90 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -53,7 +53,6 @@ #define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */ #define DM_TIMEOUT 1000 - static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) { int err; @@ -84,32 +83,23 @@ static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) { - return usbnet_write_cmd(dev, DM_WRITE_REGS, + return usbnet_write_cmd(dev, DM_WRITE_REG, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, reg, NULL, 0); } -static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value, - u16 length, void *data) +static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) { usbnet_write_cmd_async(dev, DM_WRITE_REGS, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, reg, data, length); -} - -static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) -{ - netdev_dbg(dev->net, "dm_write_async() reg=0x%02x length=%d\n", reg, length); - - dm_write_async_helper(dev, reg, 0, length, data); + 0, reg, data, length); } static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value) { - netdev_dbg(dev->net, "dm_write_reg_async() reg=0x%02x value=0x%02x\n", - reg, value); - - dm_write_async_helper(dev, reg, value, 0, NULL); + usbnet_write_cmd_async(dev, DM_WRITE_REG, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, reg, NULL, 0); } static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value) -- cgit From 3022551b6ae6d4750becc0a8e3391d4b79d5a038 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 14 Jan 2013 23:19:50 +0000 Subject: net: qmi_wwan: add TP-LINK HSUPA Modem MA180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6a1ca500e612..c4341085e5c7 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -459,6 +459,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ + {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit From e6b267ce14f61d9da0151b97ee26ab4d38055567 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 16 Jan 2013 10:58:41 -0200 Subject: video: imxfb: Do not crash on reboot Issuing a "reboot" command after the LCD times out causes the following warnings: Requesting system reboot ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_disable+0x24/0x50) [] (clk_disable+0x24/0x50) from [] (imxfb_disable_controller+0x48/0x7c) [] (imxfb_disable_controller+0x48/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c854f ]--- ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_unprepare+0x1c/0x2c) [] (clk_unprepare+0x1c/0x2c) from [] (imxfb_disable_controller+0x50/0x7c) [] (imxfb_disable_controller+0x50/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c8550 ]--- ------------[ cut here ]------------ This happens because "reboot" triggers imxfb_shutdown(), which calls imxfb_disable_controller with the clocks already disabled. To prevent this, add a clock enabled status so that we can check if the clocks are enabled before disabling them. Acked-by: Sascha Hauer Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/video/imxfb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 8435c5d601a1..609f4e97bde7 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -139,6 +139,7 @@ struct imxfb_info { struct clk *clk_ahb; struct clk *clk_per; enum imxfb_type devtype; + bool enabled; /* * These are the addresses we mapped @@ -536,6 +537,10 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi) static void imxfb_enable_controller(struct imxfb_info *fbi) { + + if (fbi->enabled) + return; + pr_debug("Enabling LCD controller\n"); writel(fbi->screen_dma, fbi->regs + LCDC_SSA); @@ -556,6 +561,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) clk_prepare_enable(fbi->clk_ipg); clk_prepare_enable(fbi->clk_ahb); clk_prepare_enable(fbi->clk_per); + fbi->enabled = true; if (fbi->backlight_power) fbi->backlight_power(1); @@ -565,6 +571,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) static void imxfb_disable_controller(struct imxfb_info *fbi) { + if (!fbi->enabled) + return; + pr_debug("Disabling LCD controller\n"); if (fbi->backlight_power) @@ -575,6 +584,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) clk_disable_unprepare(fbi->clk_per); clk_disable_unprepare(fbi->clk_ipg); clk_disable_unprepare(fbi->clk_ahb); + fbi->enabled = false; writel(0, fbi->regs + LCDC_RMCR); } -- cgit From e4a5da51daddf104183b42995411e2496832de1d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:11:10 -0800 Subject: gpio: samsung: fix pinctrl condition for exynos and exynos5440 Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG, it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work for supporting pinctrl on most Samsung SoCs including S3C, S5P as well except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 9070f8632002..713ec8c492b1 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3009,7 +3009,7 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#ifdef CONFIG_PINCTRL_SAMSUNG +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) /* * This gpio driver includes support for device tree support and there * are platforms using it. In order to maintain compatibility with those -- cgit From dcb9c3491acd63396f51dd1daf29851a5f92f632 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:12:30 -0800 Subject: gpio: samsung: silent build warning for EXYNOS5 SoCs This patch fixes following warning: drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable] Because current gpio-samsung is valid only on EXYNOS5250. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 713ec8c492b1..c1f6bc2d87a9 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -445,7 +445,7 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { }; #endif -#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_SOC_EXYNOS5250) static struct samsung_gpio_cfg exynos_gpio_cfg = { .set_pull = exynos_gpio_setpull, .get_pull = exynos_gpio_getpull, @@ -2445,7 +2445,7 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_1[] = { { .chip = { @@ -2613,7 +2613,7 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_2[] = { { .chip = { @@ -2674,7 +2674,7 @@ static struct samsung_gpio_chip exynos5_gpios_2[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_3[] = { { .chip = { @@ -2710,7 +2710,7 @@ static struct samsung_gpio_chip exynos5_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_4[] = { { .chip = { -- cgit From b514407547890686572606c9dfa4b7f832db9958 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 17 Jan 2013 10:24:09 +0200 Subject: drm/i915: fix FORCEWAKE posting reads We stopped reading FORCEWAKE for posting reads in commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd Author: Ben Widawsky Date: Sat Sep 1 22:59:50 2012 -0700 drm/i915: Never read FORCEWAKE and started using something from the same cacheline instead. On the bug reporter's machine this broke entering rc6 states after a suspend/resume cycle. It turns out reading ECOBUS as posting read worked fine, while GTFIFODBG did not, preventing RC6 states after suspend/resume per the bug report referenced below. It's not entirely clear why, but clearly GTFIFODBG was nowhere near the same cacheline or address range as FORCEWAKE. Trying out various registers for posting reads showed that all tested registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true work. Conversely, most (but not quite all) registers for which NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced bug. Based on the above, add posting reads on ECOBUS where GTFIFODBG was previously relied on. In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same address range as FORCEWAKE_VLV. v2: Add more details to the commit message. No functional changes. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411 Reported-and-tested-by: Alexander Bersenev CC: Ben Widawsky Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: add cc: stable and make the commit message a bit clearer that this is a regression fix and what exactly broke.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e83a11794172..3280cffe50f4 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4250,7 +4250,8 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_mt_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(0xffff)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); } static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) @@ -4267,7 +4268,8 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1), FORCEWAKE_ACK_TIMEOUT_MS)) @@ -4304,14 +4306,16 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } @@ -4351,6 +4355,8 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) static void vlv_force_wake_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff)); + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); } static void vlv_force_wake_get(struct drm_i915_private *dev_priv) @@ -4371,7 +4377,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv) static void vlv_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* The below doubles as a POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); gen6_gt_check_fifodbg(dev_priv); } -- cgit From 6948ce588bd765352df6f6b866f2151e26489ef1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 20 Dec 2012 11:08:57 -0800 Subject: gpio: samsung: skip gpio lib registration for EXYNOS5440 Since exynos5440 can support pinctrl so skip the legacy gpiolib registration. If not, happens following. WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c() Unknown SoC in gpio-samsung, no GPIOs added Acked-by: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index c1f6bc2d87a9..76be7eed79de 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3025,6 +3025,7 @@ static __init int samsung_gpiolib_init(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,pinctrl-exynos4210", }, { .compatible = "samsung,pinctrl-exynos4x12", }, + { .compatible = "samsung,pinctrl-exynos5440", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) if (pctrl_np && of_device_is_available(pctrl_np)) -- cgit From 11c0ceec073cb35a1bedfdece701351cfc1da5b7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 14 Jan 2013 11:53:20 +0100 Subject: gpio: mvebu: Don't free chip label memory The gpio_chip.label field is a const char * and assigned the value of a call to dev_name(). Memory obtained from dev_name() should not be freed by drivers. Acked-by: Grant Likely Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 7d9bd94be8d2..6819d63cb167 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -547,7 +547,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -557,14 +556,12 @@ static int mvebu_gpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (! res) { dev_err(&pdev->dev, "Cannot get memory resource\n"); - kfree(mvchip->chip.label); return -ENODEV; } mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->percpu_membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } } @@ -625,7 +622,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { dev_err(&pdev->dev, "no irqs\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -633,7 +629,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase, handle_level_irq); if (! gc) { dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -668,7 +663,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); kfree(gc); - kfree(mvchip->chip.label); return -ENODEV; } -- cgit From 20707874fd4fd37e09513f508e642fa8bd06365a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Jan 2013 13:10:50 -0500 Subject: Revert "drm/radeon: do not move bo to different placement at each cs" This reverts commit d025e9e2b890db679f1246037bf65bd4be512627. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 - drivers/gpu/drm/radeon/radeon_object.c | 18 ++++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 768e8fec0099..a08f657329a0 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -324,7 +324,6 @@ struct radeon_bo { struct list_head list; /* Protected by tbo.reserved */ u32 placements[3]; - u32 busy_placements[3]; struct ttm_placement placement; struct ttm_buffer_object tbo; struct ttm_bo_kmap_obj kmap; diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 883c95d8d90f..d3aface2d12d 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -84,6 +84,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) rbo->placement.fpfn = 0; rbo->placement.lpfn = 0; rbo->placement.placement = rbo->placements; + rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM; @@ -104,14 +105,6 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) if (!c) rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM; rbo->placement.num_placement = c; - - c = 0; - rbo->placement.busy_placement = rbo->busy_placements; - if (rbo->rdev->flags & RADEON_IS_AGP) { - rbo->busy_placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT; - } else { - rbo->busy_placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT; - } rbo->placement.num_busy_placement = c; } @@ -357,6 +350,7 @@ int radeon_bo_list_validate(struct list_head *head) { struct radeon_bo_list *lobj; struct radeon_bo *bo; + u32 domain; int r; r = ttm_eu_reserve_buffers(head); @@ -366,9 +360,17 @@ int radeon_bo_list_validate(struct list_head *head) list_for_each_entry(lobj, head, tv.head) { bo = lobj->bo; if (!bo->pin_count) { + domain = lobj->wdomain ? lobj->wdomain : lobj->rdomain; + + retry: + radeon_ttm_placement_from_domain(bo, domain); r = ttm_bo_validate(&bo->tbo, &bo->placement, true, false); if (unlikely(r)) { + if (r != -ERESTARTSYS && domain == RADEON_GEM_DOMAIN_VRAM) { + domain |= RADEON_GEM_DOMAIN_GTT; + goto retry; + } return r; } } -- cgit From 6427a0d771dbf2a5cfbbed00caffbf1d11f4ae0b Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 6 Dec 2012 11:06:54 -0800 Subject: Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg There is bug in the definition of struct dm_info_msg. This patch fixes the definition of this structure and makes the corresponding adjustments. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_balloon.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index f6c0011a0337..b9bb8f4c1c39 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -403,7 +403,7 @@ struct dm_info_header { */ struct dm_info_msg { - struct dm_info_header header; + struct dm_header hdr; __u32 reserved; __u32 info_size; __u8 info[]; @@ -503,13 +503,17 @@ static void hot_add_req(struct hv_dynmem_device *dm, struct dm_hot_add *msg) static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg) { - switch (msg->header.type) { + struct dm_info_header *info_hdr; + + info_hdr = (struct dm_info_header *)msg->info; + + switch (info_hdr->type) { case INFO_TYPE_MAX_PAGE_CNT: pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n"); - pr_info("Data Size is %d\n", msg->header.data_size); + pr_info("Data Size is %d\n", info_hdr->data_size); break; default: - pr_info("Received Unknown type: %d\n", msg->header.type); + pr_info("Received Unknown type: %d\n", info_hdr->type); } } -- cgit From 33080c1cda280b918349c676cb75bedb6db4a772 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 11 Dec 2012 11:07:17 -0800 Subject: Drivers: hv: balloon: Fix a memory leak The send buffer was being leaked; fix it. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reported-by: Jason Wang Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_balloon.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index b9bb8f4c1c39..dd289fd179ca 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -883,7 +883,7 @@ static int balloon_probe(struct hv_device *dev, balloon_onchannelcallback, dev); if (ret) - return ret; + goto probe_error0; dm_device.dev = dev; dm_device.state = DM_INITIALIZING; @@ -895,7 +895,7 @@ static int balloon_probe(struct hv_device *dev, kthread_run(dm_thread_func, &dm_device, "hv_balloon"); if (IS_ERR(dm_device.thread)) { ret = PTR_ERR(dm_device.thread); - goto probe_error0; + goto probe_error1; } hv_set_drvdata(dev, &dm_device); @@ -918,12 +918,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -932,7 +932,7 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* * Now submit our capabilities to the host. @@ -965,12 +965,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -979,18 +979,20 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } dm_device.state = DM_INITIALIZED; return 0; -probe_error1: +probe_error2: kthread_stop(dm_device.thread); -probe_error0: +probe_error1: vmbus_close(dev->channel); +probe_error0: + kfree(send_buffer); return ret; } @@ -1003,6 +1005,7 @@ static int balloon_remove(struct hv_device *dev) vmbus_close(dev->channel); kthread_stop(dm->thread); + kfree(send_buffer); return 0; } -- cgit From 13b6d2e6c25dd33f94873b771ad7de3550da5125 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Thu, 17 Jan 2013 07:18:29 +0000 Subject: 3c574_cs: fix operator precedence between << and & The code to print the FIFO size in tc574_config computes it as: 8 << config & Ram_size which evaluates the '<<' first, but the actual intent is to evaluate the '&' first. Add parentheses to enforce desired evaluation order. Signed-off-by: Nickolai Zeldovich Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/3c574_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index 66df93638085..ffd8de28a76a 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -432,7 +432,7 @@ static int tc574_config(struct pcmcia_device *link) netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", cardname, dev->base_addr, dev->irq, dev->dev_addr); netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", - 8 << config & Ram_size, + 8 << (config & Ram_size), ram_split[(config & Ram_split) >> Ram_split_shift], config & Autoselect ? "autoselect " : ""); -- cgit From c3745ead19ad148c57f606a0dbaee1d21214f3f7 Mon Sep 17 00:00:00 2001 From: Stef van Os Date: Thu, 17 Jan 2013 16:36:18 +0100 Subject: phy/marvell: remove fiber/copper autoselect on 88e1111 Remove the code that always enables copper/fiber autoselect, ignoring the DIS_FC strapping pin. The default value for this register is autoselect on anyway, and if you explicitly disable autoselect via strapping you probably really don't want autoselect. Signed-off-by: Stef van Os Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 5d2a3f215887..22dec9c7ef05 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -353,15 +353,6 @@ static int m88e1111_config_init(struct phy_device *phydev) int err; int temp; - /* Enable Fiber/Copper auto selection */ - temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); - temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO; - phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); - - temp = phy_read(phydev, MII_BMCR); - temp |= BMCR_RESET; - phy_write(phydev, MII_BMCR, temp); - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || -- cgit From 1ee4c55fc9620451b2a825d793042a7e0775391b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 14 Jan 2013 01:29:17 +0000 Subject: staging: vt6656: Fix inconsistent structure packing vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb56ecd ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by: Malcolm Priestley Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/bssdb.h | 1 - drivers/staging/vt6656/int.h | 1 - drivers/staging/vt6656/iocmd.h | 33 ++++++++++++++++----------------- drivers/staging/vt6656/iowpa.h | 8 +++----- 4 files changed, 19 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vt6656/bssdb.h b/drivers/staging/vt6656/bssdb.h index 6b2ec390e775..806cbf72fb59 100644 --- a/drivers/staging/vt6656/bssdb.h +++ b/drivers/staging/vt6656/bssdb.h @@ -90,7 +90,6 @@ typedef struct tagSRSNCapObject { } SRSNCapObject, *PSRSNCapObject; // BSS info(AP) -#pragma pack(1) typedef struct tagKnownBSS { // BSS info BOOL bActive; diff --git a/drivers/staging/vt6656/int.h b/drivers/staging/vt6656/int.h index 5d8faf9f96ec..e0d2b07ba608 100644 --- a/drivers/staging/vt6656/int.h +++ b/drivers/staging/vt6656/int.h @@ -34,7 +34,6 @@ #include "device.h" /*--------------------- Export Definitions -------------------------*/ -#pragma pack(1) typedef struct tagSINTData { BYTE byTSR0; BYTE byPkt0; diff --git a/drivers/staging/vt6656/iocmd.h b/drivers/staging/vt6656/iocmd.h index 22710cef751d..ae6e2d237b20 100644 --- a/drivers/staging/vt6656/iocmd.h +++ b/drivers/staging/vt6656/iocmd.h @@ -95,13 +95,12 @@ typedef enum tagWZONETYPE { // Ioctl interface structure // Command structure // -#pragma pack(1) typedef struct tagSCmdRequest { u8 name[16]; void *data; u16 wResult; u16 wCmdCode; -} SCmdRequest, *PSCmdRequest; +} __packed SCmdRequest, *PSCmdRequest; // // Scan @@ -111,7 +110,7 @@ typedef struct tagSCmdScan { u8 ssid[SSID_MAXLEN + 2]; -} SCmdScan, *PSCmdScan; +} __packed SCmdScan, *PSCmdScan; // // BSS Join @@ -126,7 +125,7 @@ typedef struct tagSCmdBSSJoin { BOOL bPSEnable; BOOL bShareKeyAuth; -} SCmdBSSJoin, *PSCmdBSSJoin; +} __packed SCmdBSSJoin, *PSCmdBSSJoin; // // Zonetype Setting @@ -137,7 +136,7 @@ typedef struct tagSCmdZoneTypeSet { BOOL bWrite; WZONETYPE ZoneType; -} SCmdZoneTypeSet, *PSCmdZoneTypeSet; +} __packed SCmdZoneTypeSet, *PSCmdZoneTypeSet; typedef struct tagSWPAResult { char ifname[100]; @@ -145,7 +144,7 @@ typedef struct tagSWPAResult { u8 key_mgmt; u8 eap_type; BOOL authenticated; -} SWPAResult, *PSWPAResult; +} __packed SWPAResult, *PSWPAResult; typedef struct tagSCmdStartAP { @@ -157,7 +156,7 @@ typedef struct tagSCmdStartAP { BOOL bShareKeyAuth; u8 byBasicRate; -} SCmdStartAP, *PSCmdStartAP; +} __packed SCmdStartAP, *PSCmdStartAP; typedef struct tagSCmdSetWEP { @@ -167,7 +166,7 @@ typedef struct tagSCmdSetWEP { BOOL bWepKeyAvailable[WEP_NKEYS]; u32 auWepKeyLength[WEP_NKEYS]; -} SCmdSetWEP, *PSCmdSetWEP; +} __packed SCmdSetWEP, *PSCmdSetWEP; typedef struct tagSBSSIDItem { @@ -180,14 +179,14 @@ typedef struct tagSBSSIDItem { BOOL bWEPOn; u32 uRSSI; -} SBSSIDItem; +} __packed SBSSIDItem; typedef struct tagSBSSIDList { u32 uItem; SBSSIDItem sBSSIDList[0]; -} SBSSIDList, *PSBSSIDList; +} __packed SBSSIDList, *PSBSSIDList; typedef struct tagSNodeItem { @@ -208,7 +207,7 @@ typedef struct tagSNodeItem { u32 uTxAttempts; u16 wFailureRatio; -} SNodeItem; +} __packed SNodeItem; typedef struct tagSNodeList { @@ -216,7 +215,7 @@ typedef struct tagSNodeList { u32 uItem; SNodeItem sNodeList[0]; -} SNodeList, *PSNodeList; +} __packed SNodeList, *PSNodeList; typedef struct tagSCmdLinkStatus { @@ -229,7 +228,7 @@ typedef struct tagSCmdLinkStatus { u32 uChannel; u32 uLinkRate; -} SCmdLinkStatus, *PSCmdLinkStatus; +} __packed SCmdLinkStatus, *PSCmdLinkStatus; // // 802.11 counter @@ -247,7 +246,7 @@ typedef struct tagSDot11MIBCount { u32 ReceivedFragmentCount; u32 MulticastReceivedFrameCount; u32 FCSErrorCount; -} SDot11MIBCount, *PSDot11MIBCount; +} __packed SDot11MIBCount, *PSDot11MIBCount; @@ -355,13 +354,13 @@ typedef struct tagSStatMIBCount { u32 ullTxBroadcastBytes[2]; u32 ullTxMulticastBytes[2]; u32 ullTxDirectedBytes[2]; -} SStatMIBCount, *PSStatMIBCount; +} __packed SStatMIBCount, *PSStatMIBCount; typedef struct tagSCmdValue { u32 dwValue; -} SCmdValue, *PSCmdValue; +} __packed SCmdValue, *PSCmdValue; // // hostapd & viawget ioctl related @@ -431,7 +430,7 @@ struct viawget_hostapd_param { u8 ssid[32]; } scan_req; } u; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ diff --git a/drivers/staging/vt6656/iowpa.h b/drivers/staging/vt6656/iowpa.h index 959c8868f6e2..2522ddec718d 100644 --- a/drivers/staging/vt6656/iowpa.h +++ b/drivers/staging/vt6656/iowpa.h @@ -67,12 +67,11 @@ enum { -#pragma pack(1) typedef struct viawget_wpa_header { u8 type; u16 req_ie_len; u16 resp_ie_len; -} viawget_wpa_header; +} __packed viawget_wpa_header; struct viawget_wpa_param { u32 cmd; @@ -113,9 +112,8 @@ struct viawget_wpa_param { u8 *buf; } scan_results; } u; -}; +} __packed; -#pragma pack(1) struct viawget_scan_result { u8 bssid[6]; u8 ssid[32]; @@ -130,7 +128,7 @@ struct viawget_scan_result { int noise; int level; int maxrate; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ -- cgit From 01fe944f1024bd4e5c327ddbe8d657656b66af2f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Jan 2013 13:30:49 -0800 Subject: macvlan: fix macvlan_get_size() commit df8ef8f3aaa (macvlan: add FDB bridge ops and macvlan flags) forgot to update macvlan_get_size() after the addition of IFLA_MACVLAN_FLAGS Signed-off-by: Eric Dumazet Cc: John Fastabend Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 68a43fe602e7..d3fb97d97cbc 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -822,7 +822,10 @@ static int macvlan_changelink(struct net_device *dev, static size_t macvlan_get_size(const struct net_device *dev) { - return nla_total_size(4); + return (0 + + nla_total_size(4) /* IFLA_MACVLAN_MODE */ + + nla_total_size(2) /* IFLA_MACVLAN_FLAGS */ + ); } static int macvlan_fill_info(struct sk_buff *skb, -- cgit From ded2f295a36d17838fe97e80d7b6ea83381474f8 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 11 Jan 2013 12:06:27 +0100 Subject: pty: return EINVAL for TIOCGPTN for BSD ptys Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up ENOIOCTLCMD error handling) changed the default return value from tty ioctl to be ENOTTY and not EINVAL. This is appropriate. But in case of TIOCGPTN for the old BSD ptys glibc started failing because it expects EINVAL to be returned. Only then it continues to obtain the pts name the other way around. So fix this case by explicit return of EINVAL in this case. Signed-off-by: Jiri Slaby Reported-by: Florian Westphal Cc: Alan Cox Cc: stable # 3.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index be6a373601b7..79ff3a5e925d 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -441,6 +441,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); + case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */ + return -EINVAL; } return -ENOIOCTLCMD; } -- cgit From ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 Mon Sep 17 00:00:00 2001 From: Stephen Hurd Date: Thu, 17 Jan 2013 14:14:53 -0800 Subject: 8250/16?50: Add support for Broadcom TruManage redirected serial port Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd Signed-off-by: Michael Chan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 11 +++++++++++ drivers/tty/serial/8250/8250.h | 1 + drivers/tty/serial/8250/8250_pci.c | 38 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 ++- 4 files changed, 52 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a8ec06..f9320437a649 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, [PORT_8250_CIR] = { .name = "CIR port" } @@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up) port->icount.tx++; if (uart_circ_empty(xmit)) break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 3b4ea84898c2..12caa1292b75 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -40,6 +40,7 @@ struct serial8250_config { #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8a2c3d934187..a27a98e1b066 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv, return setup_port(priv, port, 2, idx * 8, 0); } +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1304,6 +1316,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ @@ -1953,6 +1966,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_xr17v35x_setup, }, + /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + /* * Default "match everything" terminator entry */ @@ -2148,6 +2172,7 @@ enum pci_board_num_t { pbn_ce4100_1_115200, pbn_omegapci, pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, }; /* @@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = { .num_ports = 2, .base_baud = 115200, }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id blacklist[] = { @@ -4470,6 +4501,13 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_omegapci }, + /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + /* * AgeStar as-prs2-009 */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 78f99d97475b..2c6c85f18ea0 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -50,7 +50,8 @@ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ #define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ -#define PORT_MAX_8250 24 /* max port ID */ +#define PORT_BRCM_TRUMANAGE 24 +#define PORT_MAX_8250 25 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed -- cgit From 444ee9bd3d0fa78317c6127c961af5accf50038b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 16 Jan 2013 18:53:48 -0800 Subject: PCI: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook Signed-off-by: Bjorn Helgaas --- drivers/pci/pcie/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 6c8bc5809787..fde4a32a0295 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -82,4 +82,4 @@ endchoice config PCIE_PME def_bool y - depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI + depends on PCIEPORTBUS && PM_RUNTIME && ACPI -- cgit From 811a37effdb11e54e1ff1ddaa944286c88f58487 Mon Sep 17 00:00:00 2001 From: Tormod Volden Date: Wed, 9 Jan 2013 22:23:32 +0100 Subject: staging: wlan-ng: Fix clamping of returned SSID length Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501 Signed-off-by: Tormod Volden Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c index 4efa9bc0fcf0..89bfd858bb28 100644 --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -406,7 +406,7 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp) /* SSID */ req->ssid.status = P80211ENUM_msgitem_status_data_ok; req->ssid.data.len = le16_to_cpu(item->ssid.len); - req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_BSSID_LEN); + req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN); memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len); /* supported rates */ -- cgit From 7dfc8331781f954bbea5c59d4411acf3b28530c1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Jan 2013 20:17:01 -0500 Subject: staging/sb105x: PARPORT config is not good enough must use PARPORT_PC The sb105x driver calls parport_pc_probe_port() which isn't defined if PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good enough, must protect it with CONFIG_PARPORT_PC. Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sb105x/sb_pci_mp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index 131afd0c460c..9464f3874346 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -3054,7 +3054,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); } break; -#ifdef CONFIG_PARPORT +#ifdef CONFIG_PARPORT_PC case PCI_DEVICE_ID_MP2S1P : sbdev->nr_ports = 2; -- cgit From 2291dff02e5f8c708a46a7c4c888f2c467e26642 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 17 Jan 2013 15:14:22 +0100 Subject: USB: option: blacklist network interface on ONDA MT8205 4G LTE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 478adcfcdf26..25724f66e676 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -930,7 +930,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, -- cgit From 99beb2e9687ffd61c92a9875141eabe6f57a71b9 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 15 Jan 2013 10:29:49 +0100 Subject: USB: option: add TP-LINK HSUPA Modem MA180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 25724f66e676..0d9dac9e7f93 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -449,6 +449,10 @@ static void option_instat_callback(struct urb *urb); #define PETATEL_VENDOR_ID 0x1ff4 #define PETATEL_PRODUCT_NP10T 0x600e +/* TP-LINK Incorporated products */ +#define TPLINK_VENDOR_ID 0x2357 +#define TPLINK_PRODUCT_MA180 0x0201 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1312,6 +1316,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit From 1ee0a224bc9aad1de496c795f96bc6ba2c394811 Mon Sep 17 00:00:00 2001 From: Wolfgang Frisch Date: Thu, 17 Jan 2013 01:07:02 +0100 Subject: USB: io_ti: Fix NULL dereference in chase_port() The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[] [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [] ? add_wait_queue+0x12/0x3c [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? chase_port+0x84/0x2d6 [ 56.283512] [] ? try_to_wake_up+0x199/0x199 [ 56.283512] [] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [] ? edge_close+0x64/0x129 [ 56.283512] [] ? __wake_up+0x35/0x46 [ 56.283512] [] ? should_resched+0x5/0x23 [ 56.283512] [] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? __tty_hangup+0x307/0x351 [ 56.283512] [] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [] ? device_release_driver+0x1a/0x25 [ 56.283512] [] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [] ? device_del+0x119/0x167 [ 56.283512] [] ? usb_disable_device+0x6a/0x180 [ 56.283512] [] ? usb_disconnect+0x81/0xe6 [ 56.283512] [] ? hub_thread+0x577/0xe82 [ 56.283512] [] ? __schedule+0x490/0x4be [ 56.283512] [] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? kthread+0x81/0x89 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 58184f3de686..82afc4d6a327 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -530,6 +530,9 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, wait_queue_t wait; unsigned long flags; + if (!tty) + return; + if (!timeout) timeout = (HZ * EDGE_CLOSING_WAIT)/100; -- cgit From de5fe95587b4dcc86cc451fce2909dfa504fce10 Mon Sep 17 00:00:00 2001 From: Lingzhu Xiang Date: Sat, 5 Jan 2013 13:59:52 +0800 Subject: efivarfs: Drop link count of the right inode efivarfs_unlink() should drop the file's link count, not the directory's. Signed-off-by: Lingzhu Xiang Cc: Jeremy Kerr Tested-by: Lee, Chun-Yi Signed-off-by: Matt Fleming --- drivers/firmware/efivars.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 7b1c37497c9a..fa9fa038de3f 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -994,7 +994,7 @@ static int efivarfs_unlink(struct inode *dir, struct dentry *dentry) list_del(&var->list); spin_unlock(&efivars->lock); efivar_unregister(var); - drop_nlink(dir); + drop_nlink(dentry->d_inode); dput(dentry); return 0; } -- cgit From 1fa7e6958c5f82cc75c594e3ffaf73cc26fc94c1 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 16 Jan 2013 13:47:05 +0000 Subject: efivarfs: Never return ENOENT from firmware Files are created in efivarfs_create() before a corresponding variable is created in the firmware. This leads to users being able to read/write to the file without the variable existing in the firmware. Reading a non-existent variable currently returns -ENOENT, which is confusing because the file obviously *does* exist. Convert EFI_NOT_FOUND into -EIO which is the closest thing to "error while interacting with firmware", and should hopefully indicate to the caller that the variable is in some uninitialised state. Cc: Josh Boyer Acked-by: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Reported-by: Lingzhu Xiang Signed-off-by: Matt Fleming --- drivers/firmware/efivars.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index fa9fa038de3f..807dad48b2b1 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -674,7 +674,7 @@ static int efi_status_to_err(efi_status_t status) err = -EACCES; break; case EFI_NOT_FOUND: - err = -ENOENT; + err = -EIO; break; default: err = -EINVAL; -- cgit From 791eb564d218dabe0f9a2212916fe54240b97afb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 16 Jan 2013 21:55:36 +0000 Subject: efivarfs: Delete dentry from dcache in efivarfs_file_write() Unlike the unlink path that is called from the VFS layer, we need to call d_delete() ourselves when a variable is deleted in efivarfs_file_write(). Failure to do so means we can access a stale struct efivar_entry when reading/writing the file, which can result in the following oops, [ 59.978216] general protection fault: 0000 [#1] SMP [ 60.038660] CPU 9 [ 60.040501] Pid: 1001, comm: cat Not tainted 3.7.0-2.fc19.x86_64 #1 IBM System x3550 M3 -[7944I21]-/69Y4438 [ 60.050840] RIP: 0010:[] [] __lock_acquire+0x5e/0x1bb0 [ 60.059198] RSP: 0018:ffff880270595ce8 EFLAGS: 00010046 [ 60.064500] RAX: 0000000000000046 RBX: 0000000000000002 RCX: 0000000000000000 [ 60.071617] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 6b6b6b6b6b6b6b83 [ 60.078735] RBP: ffff880270595dd8 R08: 0000000000000002 R09: 0000000000000000 [ 60.085852] R10: 6b6b6b6b6b6b6b83 R11: 0000000000000000 R12: 0000000000000000 [ 60.092971] R13: ffff88027170cd20 R14: 0000000000000000 R15: 0000000000000000 [ 60.100091] FS: 00007fc0c8ff3740(0000) GS:ffff880277000000(0000) knlGS:0000000000000000 [ 60.108164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.113899] CR2: 0000000001520000 CR3: 000000026d594000 CR4: 00000000000007e0 [ 60.121016] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 60.128135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 60.135254] Process cat (pid: 1001, threadinfo ffff880270594000, task ffff88027170cd20) [ 60.143239] Stack: [ 60.145251] ffff880270595cf8 ffffffff81021da3 ffff880270595d08 ffffffff81021e19 [ 60.152714] ffff880270595d38 ffffffff810acdb5 ffff880200000168 0000000000000086 [ 60.160175] ffff88027170d5e8 ffffffff810d25ed ffff880270595d58 ffffffff810ace7f [ 60.167638] Call Trace: [ 60.170088] [] ? native_sched_clock+0x13/0x80 [ 60.176085] [] ? sched_clock+0x9/0x10 [ 60.181389] [] ? sched_clock_cpu+0xc5/0x120 [ 60.187211] [] ? trace_hardirqs_off+0xd/0x10 [ 60.193121] [] ? local_clock+0x6f/0x80 [ 60.198513] [] ? lock_release_holdtime.part.26+0xf/0x180 [ 60.205465] [] ? lock_release_non_nested+0x2e7/0x320 [ 60.212073] [] ? efivarfs_file_write+0x5b/0x280 [ 60.218242] [] lock_acquire+0xa1/0x1f0 [ 60.223633] [] ? efivarfs_file_write+0x111/0x280 [ 60.229892] [] ? might_fault+0x5c/0xb0 [ 60.235287] [] _raw_spin_lock+0x46/0x80 [ 60.240762] [] ? efivarfs_file_write+0x111/0x280 [ 60.247018] [] efivarfs_file_write+0x111/0x280 [ 60.253103] [] vfs_write+0xaf/0x190 [ 60.258233] [] sys_write+0x55/0xa0 [ 60.263278] [] system_call_fastpath+0x16/0x1b [ 60.269271] Code: 41 0f 45 d8 4c 89 75 f0 4c 89 7d f8 85 c0 0f 84 09 01 00 00 8b 05 a3 f9 ff 00 49 89 fa 41 89 f6 41 89 d3 85 c0 0f 84 12 01 00 00 <49> 8b 02 ba 01 00 00 00 48 3d a0 07 14 82 0f 44 da 41 83 fe 01 [ 60.289431] RIP [] __lock_acquire+0x5e/0x1bb0 [ 60.295444] RSP [ 60.298928] ---[ end trace 1bbfd41a2cf6a0d8 ]--- Cc: Josh Boyer Acked-by: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Reported-by: Lingzhu Xiang Signed-off-by: Matt Fleming --- drivers/firmware/efivars.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 807dad48b2b1..2ed59dc1c48a 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -793,6 +793,7 @@ static ssize_t efivarfs_file_write(struct file *file, spin_unlock(&efivars->lock); efivar_unregister(var); drop_nlink(inode); + d_delete(file->f_dentry); dput(file->f_dentry); } else { -- cgit From 091a62c9b3d899d99dbf4e3dbebc8dfa3edbccdd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 14 Dec 2012 21:30:27 +0300 Subject: usb: musb: cppi_dma: drop '__init' annotation This patch fixes the following: WARNING: vmlinux.o(.text+0x1e709c): Section mismatch in reference from the funct ion dma_controller_create() to the function .init.text:cppi_controller_start() The function dma_controller_create() references the function __init cppi_controller_start(). This is often because dma_controller_create lacks a __init annotation or the annotation of cppi_controller_start is wrong. This warning is there due to the deficiency in the commit 07a67bbb (usb: musb: Make dma_controller_create __devinit). Since the start() method is only called from musb_init_controller() which is not annotated, drop '__init' annotation from cppi_controller_start() and also cppi_pool_init() since it gets called from that function, to avoid another section mismatch warning... Signed-off-by: Sergei Shtylyov Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felipe Balbi --- drivers/usb/musb/cppi_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 0968dd7a859d..f522000e8f06 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr) musb_writel(&tx->tx_complete, 0, ptr); } -static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) +static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) { int j; @@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c) c->last_processed = NULL; } -static int __init cppi_controller_start(struct dma_controller *c) +static int cppi_controller_start(struct dma_controller *c) { struct cppi *controller; void __iomem *tibase; -- cgit From f0ea8834df058371d1e59012d4a67488429fb4a2 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:15 +0800 Subject: usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- arch/arm/mach-imx/devices/devices-common.h | 1 + arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++----- drivers/usb/gadget/fsl_mxc_udc.c | 24 ++++++-------- drivers/usb/gadget/fsl_udc_core.c | 38 +++++++++++++---------- 4 files changed, 41 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6277baf1b7be..9bd5777ff0e7 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan( #include struct imx_fsl_usb2_udc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 37e44398197b..3c06bd96e9cc 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -11,35 +11,36 @@ #include "../hardware.h" #include "devices-common.h" -#define imx_fsl_usb2_udc_data_entry_single(soc) \ +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _USB_OTG_BASE_ADDR, \ .irq = soc ## _INT_USB_OTG, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25); + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27); + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31); + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35); + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX51); + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51"); #endif struct platform_device *__init imx_add_fsl_usb2_udc( @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + return imx_add_platform_device_dmamask(data->devid, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 1b0f086426bd..de851e530917 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,8 +18,6 @@ #include #include -#include - static struct clk *mxc_ahb_clk; static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; @@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) clk_prepare_enable(mxc_per_clk); /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!cpu_is_mx51()) { + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { @@ -82,17 +80,15 @@ eclkrate: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - } + unsigned int v; + + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + writel(v | USBPHYCTRL_EVDO, + MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); } /* ULPI transceivers don't need usbpll */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c19f7f13790b..5fc1d724f38c 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) unsigned int i; u32 dccparams; - if (strcmp(pdev->name, driver_name)) { - VDBG("Wrong device"); - return -ENODEV; - } - udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); if (udc_controller == NULL) { ERR("malloc udc failed\n"); @@ -2756,22 +2752,32 @@ static int fsl_udc_otg_resume(struct device *dev) return fsl_udc_resume(NULL); } - /*------------------------------------------------------------------------- Register entry point for the peripheral controller driver --------------------------------------------------------------------------*/ - +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "imx-udc-mx27", + }, { + .name = "imx-udc-mx51", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = __exit_p(fsl_udc_remove), + /* Just for FSL i.mx SoC currently */ + .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ - .suspend = fsl_udc_suspend, - .resume = fsl_udc_resume, - .driver = { - .name = (char *)driver_name, - .owner = THIS_MODULE, - /* udc suspend/resume called from OTG driver */ - .suspend = fsl_udc_otg_suspend, - .resume = fsl_udc_otg_resume, + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, }, }; -- cgit From c2c9caa94748657ac8b47428ef4e95ccb646cea7 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:16 +0800 Subject: usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_mxc_udc.c | 30 +++++++++++++++++++++++------- drivers/usb/gadget/fsl_udc_core.c | 4 +++- drivers/usb/gadget/fsl_usb2_udc.h | 5 +++-- 3 files changed, 29 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index de851e530917..d3bd7b095ba3 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -23,7 +23,8 @@ static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -77,25 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - unsigned int v; + int ret = 0; /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; + } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5fc1d724f38c..667275cb7bad 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967f7082..c6703bb07b23 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { -- cgit From 6048e4c69d80600baba35856651056860d5d8f5a Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 18 Jan 2013 16:53:56 +0530 Subject: usb: dwc3: gadget: fix ep->maxburst for ep0 dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by default initialize ep->maxburst to 1 for ep0. Cc: Signed-off-by: Pratyush Anand Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2e43b332aae8..2fdd767f8fe8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1605,6 +1605,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) if (epnum == 0 || epnum == 1) { dep->endpoint.maxpacket = 512; + dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!epnum) dwc->gadget.ep0 = &dep->endpoint; -- cgit From b810075002c9f25a6da83cecda39d789000a04a9 Mon Sep 17 00:00:00 2001 From: Benoit Goby Date: Tue, 8 Jan 2013 19:57:09 -0800 Subject: usb: gadget: FunctionFS: Fix missing braces in parse_opts Add missing braces around an if block in ffs_fs_parse_opts. This broke parsing the uid/gid mount options and causes mount to fail when using uid/gid. This has been introduced by commit b9b73f7c (userns: Convert usb functionfs to use kuid/kgid where appropriate) in 3.7. Cc: Signed-off-by: Benoit Goby Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 4a6961c517f2..8c2f25121149 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1153,15 +1153,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - } - else if (!memcmp(opts, "gid", 3)) + } else if (!memcmp(opts, "gid", 3)) { data->perms.gid = make_kgid(current_user_ns(), value); if (!gid_valid(data->perms.gid)) { pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - else + } else { goto invalid; + } break; default: -- cgit From 6f8c2e7933679f54b6478945dc72e59ef9a3d5e0 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:01 +0100 Subject: intel_idle: Don't register CPU notifier if we are not running. The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [] ? collect_cpu_info_local+0x30/0x30 [] ? __might_sleep+0xe7/0x100 [] cpuidle_register_device+0x32/0x70 [] intel_idle_cpu_init+0xad/0x110 [] cpu_hotplug_notify+0x68/0x80 [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 [] vfs_write+0xb4/0x130 [] sys_write+0x5a/0xa0 [] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [] __cpuidle_register_device+0x1c/0x120 RSP This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Srivatsa S. Bhat Cc: 3.6+ Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 4ba384f1ab54..2df9414a72f7 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -448,8 +448,6 @@ static int intel_idle_probe(void) else on_each_cpu(__setup_broadcast_timer, (void *)true, 1); - register_cpu_notifier(&cpu_hotplug_notifier); - pr_debug(PREFIX "v" INTEL_IDLE_VERSION " model 0x%X\n", boot_cpu_data.x86_model); @@ -612,6 +610,7 @@ static int __init intel_idle_init(void) return retval; } } + register_cpu_notifier(&cpu_hotplug_notifier); return 0; } -- cgit From b88a634a903d9670aa5f2f785aa890628ce0dece Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:07 +0100 Subject: ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled If cpuidle is disabled, that means that: per_cpu(acpi_cpuidle_device, pr->id) is set to NULL as the acpi_processor_power_init ends up failing at retval = cpuidle_register_driver(&acpi_idle_driver) (in acpi_processor_power_init) and never sets the per_cpu idle device. So when acpi_processor_hotplug on CPU online notification tries to reference said device it crashes: cpu 3 spinlock event irq 62 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 PGD a259b067 PUD ab38b067 PMD 0 Oops: 0002 [#1] SMP odules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c nouveau mxm_wmi wmi radeon ttm sg sr_mod sd_mod cdrom ata_generic ata_piix libata crc32c_intel scsi_mod atl1c i915 fbcon tileblit font bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 1 Pid: 3047, comm: bash Not tainted 3.8.0-rc3upstream-00250-g165c029 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 RSP: e02b:ffff88001742dca8 EFLAGS: 00010202 RAX: 0000000000010be9 RBX: ffff8800a0a61800 RCX: ffff880105380000 RDX: 0000000000000003 RSI: 0000000000000200 RDI: ffff8800a0a61800 RBP: ffff88001742dce8 R08: ffffffff81812360 R09: 0000000000000200 R10: aaaaaaaaaaaaaaaa R11: 0000000000000001 R12: ffff8800a0a61800 R13: 00000000ffffff01 R14: 0000000000000000 R15: ffffffff81a907a0 FS: 00007fd6942f7700(0000) GS:ffff880105280000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000000a6773000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 3047, threadinfo ffff88001742c000, task ffff880017944000) Stack: 0000000000000150 ffff880100f59e00 ffff88001742dcd8 ffff8800a0a61800 0000000000000000 00000000ffffff01 0000000000000000 ffffffff81a907a0 ffff88001742dd18 ffffffff813815b1 ffff88001742dd08 ffffffff810ae336 Call Trace: [] acpi_processor_hotplug+0x7c/0x9f [] ? schedule_delayed_work_on+0x16/0x20 [] acpi_cpu_soft_notify+0x90/0xca [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk Cc: Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f1a5da44591d..fea6f8d71fa3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr) return -EINVAL; } + if (!dev) + return -EINVAL; + dev->cpu = pr->id; if (max_cstate == 0) -- cgit From 631e8ac18fd59722e7ceb15fceeef3f368c250f9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 18 Jan 2013 00:19:37 +0100 Subject: powernow-k8: Add a kconfig dependency on acpi-cpufreq Andreas reports in https://bugzilla.kernel.org/show_bug.cgi?id=51741 that with his Gentoo config, acpi-cpufreq wasn't enabled and powernow-k8 couldn't handoff properly to acpi-cpufreq leading to running without P-state support (i.e., cores are constantly in P0). To alleaviate that, we need to make powernow-k8 depend on acpi-cpufreq so that acpi-cpufreq is always present. References: https://bugzilla.kernel.org/show_bug.cgi?id=51741 Reported-by: Andreas Signed-off-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.x86 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 934854ae5eb4..7227cd734042 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ help This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. Support for K10 and newer processors is now in acpi-cpufreq. -- cgit From f9925b5f681d16a831210f00daedf8e9105073f4 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:13:24 -0800 Subject: pinctrl: samsung: removing duplicated condition for PINCTRL_SAMSUNG Now, PINCTRL_SAMSUNG should be enabled with PINCTRL_EXYNOS so we don't need to add 'depends on' condition already added in PINCTRL_EXYNOS. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index c31aeb01bb00..efaecefe3f8c 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -181,7 +181,6 @@ config PINCTRL_COH901 config PINCTRL_SAMSUNG bool - depends on OF && GPIOLIB select PINMUX select PINCONF -- cgit From d6fb3be544b46a7611a3373fcaa62b5b0be01888 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 16 Jan 2013 13:36:37 +0000 Subject: net: calxedaxgmac: throw away overrun frames The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index b407043ce9b0..f7f02900f650 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -548,6 +548,10 @@ static int desc_get_rx_status(struct xgmac_priv *priv, struct xgmac_dma_desc *p) return -1; } + /* All frames should fit into a single buffer */ + if (!(status & RXDESC_FIRST_SEG) || !(status & RXDESC_LAST_SEG)) + return -1; + /* Check if packet has checksum already */ if ((status & RXDESC_FRAME_TYPE) && (status & RXDESC_EXT_STATUS) && !(ext_status & RXDESC_IP_PAYLOAD_MASK)) -- cgit From 213815a1e6ae70b9648483b110bc5081795f99e8 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 17 Jan 2013 05:30:42 +0000 Subject: net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on same host" introduced a regression under which a bridge acting as vSwitch whose uplink is an mlx4 Ethernet device become non-operative in native (non sriov) mode. This happens since broadcast ARP requests sent by VMs were loopback-ed by the HW and hence the bridge learned VM source MACs on both the VM and the uplink ports. The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch configuration or when the device is in selftest. Reviewed-by: Or Gerlitz Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 2b799f4f1c37..6771b69f40d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -630,10 +630,15 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->tx_csum++; } - /* Copy dst mac address to wqe */ - ethh = (struct ethhdr *)skb->data; - tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); - tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + if (mlx4_is_mfunc(mdev->dev) || priv->validate_loopback) { + /* Copy dst mac address to wqe. This allows loopback in eSwitch, + * so that VFs and PF can communicate with each other + */ + ethh = (struct ethhdr *)skb->data; + tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); + tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + } + /* Handle LSO (TSO) packets */ if (lso_header_size) { /* Mark opcode as LSO */ -- cgit From ca4c7b35f75492de7fbf5ee95be07481c348caee Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 17 Jan 2013 05:30:43 +0000 Subject: net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults The lines if (mlx4_is_mfunc(dev)) { nreq = 2; } else { which hard code the number of requested msi-x vectors under multi-function mode to two can be removed completely, since the firmware sets num_eqs and reserved_eqs appropriately Thus, the code line: nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq); is by itself sufficient and correct for all cases. Currently, for mfunc mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled. This triples (one vector is used for the async events and commands EQ) the horse power provided for processing of incoming packets on netdev RSS scheme, IO initiators/targets commands processing flows, etc. Reviewed-by: Jack Morgenstein Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e1bafffbc3b1..a6542d75374c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1790,15 +1790,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) int i; if (msi_x) { - /* In multifunction mode each function gets 2 msi-X vectors - * one for data path completions anf the other for asynch events - * or command completions */ - if (mlx4_is_mfunc(dev)) { - nreq = 2; - } else { - nreq = min_t(int, dev->caps.num_eqs - - dev->caps.reserved_eqs, nreq); - } + nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, + nreq); entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL); if (!entries) -- cgit From 4b090d8dffd2a036f894c3fa6da3c5cc0e20536c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 22:53:49 -0200 Subject: pinctrl: pinctrl-mxs: Fix variables' definition type Fix the following warnings when building with W=1 option: drivers/pinctrl/pinctrl-mxs.c: In function 'mxs_dt_free_map': drivers/pinctrl/pinctrl-mxs.c:151:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/pinctrl/pinctrl-mxs.c: In function 'mxs_pinctrl_enable': drivers/pinctrl/pinctrl-mxs.c:208:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/pinctrl/pinctrl-mxs.c: In function 'mxs_pinconf_group_set': drivers/pinctrl/pinctrl-mxs.c:265:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/pinctrl/pinctrl-mxs.c: In function 'mxs_pinctrl_parse_group': drivers/pinctrl/pinctrl-mxs.c:376:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-mxs.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c index dd227d21dcf2..23af9f1f9c35 100644 --- a/drivers/pinctrl/pinctrl-mxs.c +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -146,7 +146,7 @@ free: static void mxs_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps) { - int i; + u32 i; for (i = 0; i < num_maps; i++) { if (map[i].type == PIN_MAP_TYPE_MUX_GROUP) @@ -203,7 +203,7 @@ static int mxs_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned selector, void __iomem *reg; u8 bank, shift; u16 pin; - int i; + u32 i; for (i = 0; i < g->npins; i++) { bank = PINID_TO_BANK(g->pins[i]); @@ -256,7 +256,7 @@ static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, void __iomem *reg; u8 ma, vol, pull, bank, shift; u16 pin; - int i; + u32 i; ma = CONFIG_TO_MA(config); vol = CONFIG_TO_VOL(config); @@ -345,8 +345,7 @@ static int mxs_pinctrl_parse_group(struct platform_device *pdev, const char *propname = "fsl,pinmux-ids"; char *group; int length = strlen(np->name) + SUFFIX_LEN; - int i; - u32 val; + u32 val, i; group = devm_kzalloc(&pdev->dev, length, GFP_KERNEL); if (!group) -- cgit From 16fa36be89305f06a217509fcce4f4aed5df0627 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 9 Jan 2013 19:28:09 +0100 Subject: pinctrl: mvebu: Fix compiler warnings match->data is const void * where as dev.platform_data is just void *. Add a cast to remove the const, which is causing the compiler warning: drivers/pinctrl/mvebu/pinctrl-kirkwood.c:461:26: warning: assignment discards 'const' qualifier from pointer target type Dove has the exact same warning, so gets the same cast. Signed-off-by: Andrew Lunn Acked-by: Jason Cooper Signed-off-by: Linus Walleij --- drivers/pinctrl/mvebu/pinctrl-dove.c | 2 +- drivers/pinctrl/mvebu/pinctrl-kirkwood.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c index 69aba3697287..428ea96a94d3 100644 --- a/drivers/pinctrl/mvebu/pinctrl-dove.c +++ b/drivers/pinctrl/mvebu/pinctrl-dove.c @@ -588,7 +588,7 @@ static int dove_pinctrl_probe(struct platform_device *pdev) { const struct of_device_id *match = of_match_device(dove_pinctrl_of_match, &pdev->dev); - pdev->dev.platform_data = match->data; + pdev->dev.platform_data = (void *)match->data; /* * General MPP Configuration Register is part of pdma registers. diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c index f12084e18057..7907e7ced944 100644 --- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c @@ -458,7 +458,7 @@ static int kirkwood_pinctrl_probe(struct platform_device *pdev) { const struct of_device_id *match = of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); - pdev->dev.platform_data = match->data; + pdev->dev.platform_data = (void *)match->data; return mvebu_pinctrl_probe(pdev); } -- cgit From 889c5d3e76dd506b8d1c3794824132e354b8255c Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 8 Jan 2013 22:37:04 +0100 Subject: pinctrl: mvebu: fix MPP6 value for kirkwood driver Note that I am not sure about the MPP value for the PTP functionality. It seems that the PTP references have been removed from the Marvell hardware specifications available to me. Signed-off-by: Simon Guinot Acked-by: Jason Cooper Acked-by: Andrew Lunn Signed-off-by: Linus Walleij --- drivers/pinctrl/mvebu/pinctrl-kirkwood.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c index 7907e7ced944..cdd483df673e 100644 --- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c @@ -66,9 +66,9 @@ static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))), MPP_MODE(6, - MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), + MPP_VAR_FUNCTION(0x1, "sysrst", "out", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), MPP_MODE(7, MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0, 1)), -- cgit From f427e5f1cf75bba84cccdac1d8a90552d9ae1065 Mon Sep 17 00:00:00 2001 From: Thomas Schlichter Date: Sat, 19 Jan 2013 00:28:22 +0100 Subject: ACPI / processor: Get power info before updating the C-states acpi_processor_get_power_info() has to be called before acpi_processor_setup_cpuidle_states() to have the latest information available. This fixes the missing C-state information after AC-->DC transition. Signed-off-by: Thomas Schlichter Cc: Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fea6f8d71fa3..ed9a1cc690be 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1152,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) } /* Populate Updated C-state information */ + acpi_processor_get_power_info(pr); acpi_processor_setup_cpuidle_states(pr); /* Enable all cpuidle devices */ -- cgit From 25216865392a6e1f3032855aee7407de1fe0b70c Mon Sep 17 00:00:00 2001 From: Lans Zhang Date: Wed, 16 Jan 2013 09:03:29 +0000 Subject: ACPI, APEI: Fixup incorrect 64-bit access width firmware bug The bit width check was introduced by 15afae60 (ACPI, APEI: Fix incorrect APEI register bit width check and usage), and a fixup for incorrect 32-bit width memory address was given by f712c71 (ACPI, APEI: Fixup common access width firmware bug). Now there is a similar symptom: [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0] Another bogus BIOS reports an incorrect 64-bit width in trigger table. Thus, apply to a similar workaround for 64-bit width memory address. Signed-off-by: Lans Zhang Acked-by: Gary Hade Acked-by: Myron Stowe Acked-by: Jean Delvare Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/apei-base.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 00a783661d0b..46f80e2c92f7 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 && *access_bit_width < 32) *access_bit_width = 32; + else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 && + *access_bit_width < 64) + *access_bit_width = 64; if ((bit_width + bit_offset) > *access_bit_width) { pr_warning(FW_BUG APEI_PFX -- cgit From c1acd7090f67471998edd1d036003fcba2c1b419 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Fri, 18 Jan 2013 04:26:34 +0000 Subject: net: qmi_wwan: add ONDA MT8205 4G LTE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index c4341085e5c7..575a5839ee34 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -433,6 +433,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */ + {QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */ {QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ -- cgit From 9a4c831ebbc1bf7cb41079e421a74bddd508f251 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Fri, 18 Jan 2013 16:52:09 +0000 Subject: net/hyperv: fix wrong length of mac address This patch fixed wrong mac length, it should be ETH_ALEN, also replaced the hardcode 6 in hyperv_net.h Signed-off-by: Amos Kong Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 2 +- drivers/net/hyperv/netvsc_drv.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 5fd6f4674326..e6fe0d80d612 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -84,7 +84,7 @@ struct hv_netvsc_packet { }; struct netvsc_device_info { - unsigned char mac_adr[6]; + unsigned char mac_adr[ETH_ALEN]; bool link_state; /* 0 - link up, 1 - link down */ int ring_size; }; diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index f825a629a699..8264f0ef7692 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -349,7 +349,7 @@ static int netvsc_set_mac_addr(struct net_device *ndev, void *p) struct net_device_context *ndevctx = netdev_priv(ndev); struct hv_device *hdev = ndevctx->device_ctx; struct sockaddr *addr = p; - char save_adr[14]; + char save_adr[ETH_ALEN]; unsigned char save_aatype; int err; -- cgit From 630541863b29f88c7ab34e647758344e4cd1eafd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 14:25:44 +1000 Subject: ttm: don't destroy old mm_node on memcpy failure When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index d73d6e3e17b2..44420fca7dfa 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -344,8 +344,12 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, if (ttm->state == tt_unpopulated) { ret = ttm->bdev->driver->ttm_tt_populate(ttm); - if (ret) + if (ret) { + /* if we fail here don't nuke the mm node + * as the bo still owns it */ + old_copy.mm_node = NULL; goto out1; + } } add = 0; @@ -371,8 +375,11 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, prot); } else ret = ttm_copy_io_page(new_iomap, old_iomap, page); - if (ret) + if (ret) { + /* failing here, means keep old copy as-is */ + old_copy.mm_node = NULL; goto out1; + } } mb(); out2: -- cgit From 014b34409fb2015f63663b6cafdf557fdf289628 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 15:58:34 +1000 Subject: ttm: on move memory failure don't leave a node dangling if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 33d20be87db5..52b20b12c83a 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -434,6 +434,7 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, bo->mem = tmp_mem; bdev->driver->move_notify(bo, mem); bo->mem = *mem; + *mem = tmp_mem; } goto out_err; -- cgit From 85de7fac3990cf0c0736edc83856add2e648c76a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Nov 2012 06:19:06 +0100 Subject: i2c: mxs: Fix misuse init_completion The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1b1a936eccc9..977c4d596b69 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -316,7 +316,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (msg->len == 0) return -EINVAL; - init_completion(&i2c->cmd_complete); + INIT_COMPLETION(i2c->cmd_complete); i2c->cmd_err = 0; ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -473,6 +473,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) i2c->dev = dev; i2c->speed = &mxs_i2c_95kHz_config; + init_completion(&i2c->cmd_complete); + if (dev->of_node) { err = mxs_i2c_get_ofdata(i2c); if (err) -- cgit From 9992c2e2fbb72ffc63d4587c4aa94dfcd8229e55 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 21 Jan 2013 05:50:38 +0000 Subject: net: cdc_ncm: workaround for missing CDC Union MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding support for the MBIM mode in some Sierra Wireless devices. Some Sierra Wireless firmwares support CDC MBIM but have no CDC Union funtional descriptor. This violates the MBIM specification, but we can easily work around the bug by looking at the Interface Association Descriptor instead. This is most likely what Windows uses too, which explains how the firmware bug has gone unnoticed until now. This change will not affect any currently supported device conforming to the NCM or MBIM specifications, as they must have the CDC Union descriptor. Cc: Greg Suarez Cc: Alexey Orishko Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 71b6e92b8e9b..4041159f6c98 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -344,6 +344,23 @@ static const struct ethtool_ops cdc_ncm_ethtool_ops = { .nway_reset = usbnet_nway_reset, }; +/* return first slave interface if an IAD matches the given master */ +static struct usb_interface *get_iad_slave(struct usb_device *udev, + struct usb_interface *master) { + int i; + struct usb_interface_assoc_descriptor *iad; + u8 mnum = master->cur_altsetting->desc.bInterfaceNumber; + + for (i = 0; i < USB_MAXIADS; i++) { + iad = udev->actconfig->intf_assoc[i]; + if (!iad) + break; + if (iad->bFirstInterface == mnum && iad->bInterfaceCount == 2) + return usb_ifnum_to_if(udev, mnum + 1); + } + return NULL; +} + int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting) { struct cdc_ncm_ctx *ctx; @@ -435,6 +452,16 @@ advance: len -= temp; } + /* some buggy devices have an IAD but no CDC Union */ + if (!ctx->union_desc) { + dev_dbg(&intf->dev, "missing CDC Union descriptor\n"); + ctx->data = get_iad_slave(dev->udev, intf); + if (ctx->data) { + ctx->control = intf; + dev_dbg(&intf->dev, "got slave from IAD\n"); + } + } + /* check if we got everything */ if ((ctx->control == NULL) || (ctx->data == NULL) || ((!ctx->mbim_desc) && ((ctx->ether_desc == NULL) || (ctx->control != intf)))) -- cgit From 328d7b8a4ab045484e1cc09579abf13c8c6223e3 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 21 Jan 2013 05:50:39 +0000 Subject: net: cdc_mbim: send ZLP after max sized NTBs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We normally avoid sending ZLPs by padding NTBs with a zero byte if the NTB is shorter than dwNtbOutMaxSize, resulting in a short USB packet instead of a ZLP. But in the case where the NTB length is exactly dwNtbOutMaxSize and this is an exact multiplum of wMaxPacketSize, then we must send a ZLP. This fixes an issue seen on a Sierra Wireless MC7710 device where the transmission would fail whenever we ended up padding the NTBs to max size. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 42f51c71ec1f..3a5673aa1c37 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -366,7 +366,7 @@ err: static const struct driver_info cdc_mbim_info = { .description = "CDC MBIM", - .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN, + .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP, .bind = cdc_mbim_bind, .unbind = cdc_mbim_unbind, .manage_power = cdc_mbim_manage_power, -- cgit From 6b4ef60299e30daa8643218fde6152d8a01e2d4b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 21 Jan 2013 05:50:40 +0000 Subject: net: cdc_ncm: fix error path for single interface probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bbc8d92 (net: cdc_ncm: add Huawei devices) implemented support for devices with a single combined control and data interface. Fix up the error path so that we do not double release such interfaces in case of probing failures. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4041159f6c98..2c4b41ffddb6 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -524,7 +524,8 @@ advance: error2: usb_set_intfdata(ctx->control, NULL); usb_set_intfdata(ctx->data, NULL); - usb_driver_release_interface(driver, ctx->data); + if (ctx->data != ctx->control) + usb_driver_release_interface(driver, ctx->data); error: cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]); dev->data[0] = 0; -- cgit From 6509141f9c2ba74df6cc72ec35cd1865276ae3a4 Mon Sep 17 00:00:00 2001 From: Wei Shuai Date: Mon, 21 Jan 2013 06:00:31 +0000 Subject: usbnet: add new flag FLAG_NOARP for usb net devices We do have some USB net devices, which cannot do ARP. so we can introduce a new flag FLAG_NOARP, then client drivers can easily handle this kind of devices Signed-off-by: Wei Shuai Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 ++++ include/linux/usb/usbnet.h | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 3d4bf01641b4..f34b2ebee815 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1448,6 +1448,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); + /* devices that cannot do ARP */ + if ((dev->driver_info->flags & FLAG_NOARP) != 0) + net->flags |= IFF_NOARP; + /* maybe the remote can't receive an Ethernet MTU */ if (net->mtu > (dev->hard_mtu - net->hard_header_len)) net->mtu = dev->hard_mtu - net->hard_header_len; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index bd45eb7bedc8..5de7a220e986 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -100,6 +100,7 @@ struct driver_info { #define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ +#define FLAG_NOARP 0x2000 /* device can't do ARP */ /* * Indicates to usbnet, that USB driver accumulates multiple IP packets. -- cgit From 2f62d5aa2879dc380881b2c74d042051dbb60bc8 Mon Sep 17 00:00:00 2001 From: Wei Shuai Date: Mon, 21 Jan 2013 06:00:32 +0000 Subject: cdc_ncm: add support FLAG_NOARP for Infineon modem platform Infineon(now Intel) HSPA Modem platform NCM cannot support ARP. we can define a new common structure wwan_noarp_info. Then more similiar NO ARP devices can be handled easily Signed-off-by: Wei Shuai Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 2c4b41ffddb6..f94711caa08a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1183,6 +1183,20 @@ static const struct driver_info wwan_info = { .tx_fixup = cdc_ncm_tx_fixup, }; +/* Same as wwan_info, but with FLAG_NOARP */ +static const struct driver_info wwan_noarp_info = { + .description = "Mobile Broadband Network Device (NO ARP)", + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET + | FLAG_WWAN | FLAG_NOARP, + .bind = cdc_ncm_bind, + .unbind = cdc_ncm_unbind, + .check_connect = cdc_ncm_check_connect, + .manage_power = usbnet_manage_power, + .status = cdc_ncm_status, + .rx_fixup = cdc_ncm_rx_fixup, + .tx_fixup = cdc_ncm_tx_fixup, +}; + static const struct usb_device_id cdc_devs[] = { /* Ericsson MBM devices like F5521gw */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO @@ -1222,6 +1236,13 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long)&wwan_info, }, + /* Infineon(now Intel) HSPA Modem platform */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_noarp_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), -- cgit From d721a1752ba544df8d7d36959038b26bc92bdf80 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:21 +0000 Subject: isdn/gigaset: fix zero size border case in debug dump If subtracting 12 from l leaves zero we'd do a zero size allocation, leading to an oops later when we try to set the NUL terminator. Reported-by: Dan Carpenter Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- drivers/isdn/gigaset/capi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c index 68452b768da2..03a0a01a4054 100644 --- a/drivers/isdn/gigaset/capi.c +++ b/drivers/isdn/gigaset/capi.c @@ -248,6 +248,8 @@ static inline void dump_rawmsg(enum debuglevel level, const char *tag, CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l, CAPIMSG_CONTROL(data)); l -= 12; + if (l <= 0) + return; dbgline = kmalloc(3 * l, GFP_ATOMIC); if (!dbgline) return; -- cgit From e1bfe75d66f809ad61d0a6d070dc78bb05369026 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Dec 2012 11:46:04 +0900 Subject: mfd: arizona: Disable control interface reporting for WM5102 and WM5110 Rather than disabling the error reporting only for earlier revisions unconditionally disable it. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-irq.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 74713bf5371f..2bec5f0db3ee 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -176,14 +176,7 @@ int arizona_irq_init(struct arizona *arizona) aod = &wm5102_aod; irq = &wm5102_irq; - switch (arizona->rev) { - case 0: - case 1: - ctrlif_error = false; - break; - default: - break; - } + ctrlif_error = false; break; #endif #ifdef CONFIG_MFD_WM5110 @@ -191,14 +184,7 @@ int arizona_irq_init(struct arizona *arizona) aod = &wm5110_aod; irq = &wm5110_irq; - switch (arizona->rev) { - case 0: - case 1: - ctrlif_error = false; - break; - default: - break; - } + ctrlif_error = false; break; #endif default: -- cgit From ee487114f0274ed62c92a727787cd6fa4d465157 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Mon, 10 Dec 2012 16:44:56 +0530 Subject: mfd: tps65910: Select REGMAP_IRQ in Kconfig to fix build error TPS65910 mfd driver uses functions that are only avaiable when REGMAP_IRQ is enabled. So "select REGMAP_IRQ" is added to mfd Kconfig to fix below build error: drivers/built-in.o: In function `tps65910_irq_exit': /media/anil/kernel/drivers/mfd/tps65910.c:265: undefined reference to `regmap_del_irq_chip' drivers/built-in.o: In function `tps65910_irq_init': /media/anil/kernel/drivers/mfd/tps65910.c:254: undefined reference to `regmap_add_irq_chip' drivers/built-in.o: In function `tps65910_i2c_probe': /media/anil/kernel/drivers/mfd/tps65910.c:509: undefined reference to `regmap_irq_get_domain' make: *** [vmlinux] Error 1 Signed-off-by: AnilKumar Ch Tested-by: Matt Porter Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 47ad4e270877..ff553babf455 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -237,6 +237,7 @@ config MFD_TPS65910 depends on I2C=y && GPIOLIB select MFD_CORE select REGMAP_I2C + select REGMAP_IRQ select IRQ_DOMAIN help if you say yes here you get support for the TPS65910 series of -- cgit From 89d9b1c99374997d68910ba49d5b7df80e7f2061 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Dec 2012 10:20:15 +0100 Subject: mfd: db8500-prcmu: Fix irqdomain usage This fixes two issues with the DB8500 PRCMU irqdomain: - You have to state the irq base 0 to get a linear domain for the DT case from irq_domain_add_simple() - The irqdomain was not used to translate the initial irq request using irq_create_mapping() making the linear case fail as it was lacking a proper descriptor. I took this opportunity to fix two lines of whitespace errors in related code as I was anyway messing around with it. Cc: stable@kernel.org Acked-by Lee Jones Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index dc8826d8d69d..268f45d42394 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2524,7 +2524,7 @@ static bool read_mailbox_0(void) for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) { if (ev & prcmu_irq_bit[n]) - generic_handle_irq(IRQ_PRCMU_BASE + n); + generic_handle_irq(irq_find_mapping(db8500_irq_domain, n)); } r = true; break; @@ -2737,13 +2737,14 @@ static int db8500_irq_map(struct irq_domain *d, unsigned int virq, } static struct irq_domain_ops db8500_irq_ops = { - .map = db8500_irq_map, - .xlate = irq_domain_xlate_twocell, + .map = db8500_irq_map, + .xlate = irq_domain_xlate_twocell, }; static int db8500_irq_init(struct device_node *np) { - int irq_base = -1; + int irq_base = 0; + int i; /* In the device tree case, just take some IRQs */ if (!np) @@ -2758,6 +2759,10 @@ static int db8500_irq_init(struct device_node *np) return -ENOSYS; } + /* All wakeups will be used, so create mappings for all */ + for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) + irq_create_mapping(db8500_irq_domain, i); + return 0; } -- cgit From 136d982ecae912c815587a1653f235f0ef570da8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 25 Dec 2012 00:16:43 +0800 Subject: mfd: max77686: Init max77686->dev before using it Current code uses max77686->dev in the dev_err call before setting it to &i2c->dev. Fix it. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/max77686.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index f6878f8db57d..4d73963cd8f0 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -93,15 +93,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c, if (max77686 == NULL) return -ENOMEM; - max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config); - if (IS_ERR(max77686->regmap)) { - ret = PTR_ERR(max77686->regmap); - dev_err(max77686->dev, "Failed to allocate register map: %d\n", - ret); - kfree(max77686); - return ret; - } - i2c_set_clientdata(i2c, max77686); max77686->dev = &i2c->dev; max77686->i2c = i2c; @@ -111,6 +102,15 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686->irq_gpio = pdata->irq_gpio; max77686->irq = i2c->irq; + max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config); + if (IS_ERR(max77686->regmap)) { + ret = PTR_ERR(max77686->regmap); + dev_err(max77686->dev, "Failed to allocate register map: %d\n", + ret); + kfree(max77686); + return ret; + } + if (regmap_read(max77686->regmap, MAX77686_REG_DEVICE_ID, &data) < 0) { dev_err(max77686->dev, -- cgit From 2429d863868edb611f033c9ce4db519fbc270240 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 25 Dec 2012 00:28:36 +0800 Subject: mfd: max77693: Init max77693->dev before using it Current code uses max77693->dev in the dev_err call before setting it to &i2c->dev. Fix it. This patch also includes below cleanups: - Move checking pdata earlier and show dev_err if no platform data found. - Remove unnecessary err_regmap goto label. - Unregister i2c devices if regmap init for muic fails. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/max77693.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index cc5155e20494..9e60fed5ff82 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -114,35 +114,37 @@ static int max77693_i2c_probe(struct i2c_client *i2c, u8 reg_data; int ret = 0; + if (!pdata) { + dev_err(&i2c->dev, "No platform data found.\n"); + return -EINVAL; + } + max77693 = devm_kzalloc(&i2c->dev, sizeof(struct max77693_dev), GFP_KERNEL); if (max77693 == NULL) return -ENOMEM; - max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config); - if (IS_ERR(max77693->regmap)) { - ret = PTR_ERR(max77693->regmap); - dev_err(max77693->dev,"failed to allocate register map: %d\n", - ret); - goto err_regmap; - } - i2c_set_clientdata(i2c, max77693); max77693->dev = &i2c->dev; max77693->i2c = i2c; max77693->irq = i2c->irq; max77693->type = id->driver_data; - if (!pdata) - goto err_regmap; + max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config); + if (IS_ERR(max77693->regmap)) { + ret = PTR_ERR(max77693->regmap); + dev_err(max77693->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } max77693->wakeup = pdata->wakeup; - if (max77693_read_reg(max77693->regmap, - MAX77693_PMIC_REG_PMIC_ID2, ®_data) < 0) { + ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2, + ®_data); + if (ret < 0) { dev_err(max77693->dev, "device not found on this channel\n"); - ret = -ENODEV; - goto err_regmap; + return ret; } else dev_info(max77693->dev, "device ID: 0x%x\n", reg_data); @@ -163,7 +165,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(max77693->regmap_muic); dev_err(max77693->dev, "failed to allocate register map: %d\n", ret); - goto err_regmap; + goto err_regmap_muic; } ret = max77693_irq_init(max77693); @@ -184,9 +186,9 @@ static int max77693_i2c_probe(struct i2c_client *i2c, err_mfd: max77693_irq_exit(max77693); err_irq: +err_regmap_muic: i2c_unregister_device(max77693->muic); i2c_unregister_device(max77693->haptic); -err_regmap: return ret; } -- cgit From b30dd8f2e5e6a1b31b89d93d85942055b97327c2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 25 Dec 2012 10:52:49 +0800 Subject: mfd: pcf50633: Init pcf->dev before using it Current code uses pcf->dev in the dev_err call before setting it to &client->dev. Fix it. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/pcf50633-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 64803f13bcec..d11567307fbe 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -208,6 +208,8 @@ static int pcf50633_probe(struct i2c_client *client, if (!pcf) return -ENOMEM; + i2c_set_clientdata(client, pcf); + pcf->dev = &client->dev; pcf->pdata = pdata; mutex_init(&pcf->lock); @@ -219,9 +221,6 @@ static int pcf50633_probe(struct i2c_client *client, return ret; } - i2c_set_clientdata(client, pcf); - pcf->dev = &client->dev; - version = pcf50633_reg_read(pcf, 0); variant = pcf50633_reg_read(pcf, 1); if (version < 0 || variant < 0) { -- cgit From 1f0529b4d80ad02df637be67ed4f82e93b8db32f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Jan 2013 14:40:14 +0100 Subject: mfd: tc3589x: Use simple irqdomain This fixes a regression in the TC3589x driver introduced in commit 15e27b1088245a2de3b7d09d39cd209212eb16af "mfd: Provide the tc3589x with its own IRQ domain" If a system with a TC3589x expander is booted and a base IRQ is passed from platform data, a legacy domain will be used. However, since the Ux500 is now switched to use SPARSE_IRQ, no descriptors get allocated on-the-fly, and we get a crash. Fix this by switching to using the simple irqdomain that will handle this uniformly and also allocates descriptors explicitly. Also fix two small whitespace errors in the vicinity while we're at it. Cc: stable@kernel.org Acked-by: Lee Jones Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/tc3589x.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index a06d66b929b1..ecc092c7f745 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -219,25 +219,18 @@ static void tc3589x_irq_unmap(struct irq_domain *d, unsigned int virq) } static struct irq_domain_ops tc3589x_irq_ops = { - .map = tc3589x_irq_map, + .map = tc3589x_irq_map, .unmap = tc3589x_irq_unmap, - .xlate = irq_domain_xlate_twocell, + .xlate = irq_domain_xlate_twocell, }; static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np) { int base = tc3589x->irq_base; - if (base) { - tc3589x->domain = irq_domain_add_legacy( - NULL, TC3589x_NR_INTERNAL_IRQS, base, - 0, &tc3589x_irq_ops, tc3589x); - } - else { - tc3589x->domain = irq_domain_add_linear( - np, TC3589x_NR_INTERNAL_IRQS, - &tc3589x_irq_ops, tc3589x); - } + tc3589x->domain = irq_domain_add_simple( + np, TC3589x_NR_INTERNAL_IRQS, base, + &tc3589x_irq_ops, tc3589x); if (!tc3589x->domain) { dev_err(tc3589x->dev, "Failed to create irqdomain\n"); -- cgit From 9270bdf5405668ca5d75ace1d7872e2762162c47 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Jan 2013 17:16:12 +0000 Subject: mfd: arizona: Check errors from regcache_sync() If the control bus is unrelabile we may hit errors during regcache_sync(), especially given that it tends to be one the most dense bursts of I/O in many systems. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index bc8a3edb6bbf..222c03a5ddc0 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -239,7 +239,12 @@ static int arizona_runtime_resume(struct device *dev) return ret; } - regcache_sync(arizona->regmap); + ret = regcache_sync(arizona->regmap); + if (ret != 0) { + dev_err(arizona->dev, "Failed to restore register cache\n"); + regulator_disable(arizona->dcvdd); + return ret; + } return 0; } -- cgit From 31b35e9edd51cab96d880248206c90b7177e3e5c Mon Sep 17 00:00:00 2001 From: Nestor Ovroy Date: Fri, 18 Jan 2013 16:51:03 +0100 Subject: regmap: fix small typo in regmap_bulk_write comment Signed-off-by: Nestor Ovroy Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 42d5cb0f503f..f00b059c057a 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1106,7 +1106,7 @@ EXPORT_SYMBOL_GPL(regmap_raw_write); * @val_count: Number of registers to write * * This function is intended to be used for writing a large block of - * data to be device either in single transfer or multiple transfer. + * data to the device either in single transfer or multiple transfer. * * A value of zero will be returned on success, a negative errno will * be returned in error cases. -- cgit From 0f40cbc4f85e13b1a42ae2f41231645a14965872 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 22:32:06 -0200 Subject: i2c: mxs: Fix type of error code cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 977c4d596b69..d6abaf2cf2e3 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -127,7 +127,7 @@ struct mxs_i2c_dev { struct device *dev; void __iomem *regs; struct completion cmd_complete; - u32 cmd_err; + int cmd_err; struct i2c_adapter adapter; const struct mxs_i2c_speed_config *speed; -- cgit From bfd059da9503e0091541285cb0481f66b95c0296 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 26 Dec 2012 10:30:16 +0800 Subject: i2c: sirf: register i2c_client from dt child-nodes in probe entry in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sirf.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 3f1818b87974..e03381aee34f 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -328,6 +329,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->algo = &i2c_sirfsoc_algo; adap->algo_data = siic; + adap->dev.of_node = pdev->dev.of_node; adap->dev.parent = &pdev->dev; adap->nr = pdev->id; @@ -371,6 +373,8 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) clk_disable(clk); + of_i2c_register_devices(adap); + dev_info(&pdev->dev, " I2C adapter ready to operate\n"); return 0; -- cgit From 43a2bd42d077de6ad40b00a2abfc4677e24d239c Mon Sep 17 00:00:00 2001 From: Laurent Navet Date: Tue, 8 Jan 2013 14:40:09 +0100 Subject: i2c: muxes: fix wrong use of sizeof(ptr) sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet Acked-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 1e44d04d1b22..a43c0ce5e3d8 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -167,7 +167,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) } mux->busses = devm_kzalloc(&pdev->dev, - sizeof(mux->busses) * mux->pdata->bus_count, + sizeof(*mux->busses) * mux->pdata->bus_count, GFP_KERNEL); if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); -- cgit From f44d188acdca1a34e4439ca6a173f85086e0e655 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:32 +0000 Subject: cpufreq: OMAP: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Alexander Holler Tested-by: Alexander Holler Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/omap-cpufreq.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 1f3417a8322d..97102b05843f 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy, freq = ret; if (mpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(mpu_dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", __func__, freqs.new); return -EINVAL; } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * OPP_TOLERANCE / 100; volt_old = regulator_get_voltage(mpu_reg); } -- cgit From 78e8eb8feab7d85f4cc215afe1457a228bf4eed9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:33 +0000 Subject: cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Jack Mitchell Tested-by: Alexander Holler Tested-by: Jack Mitchell Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 52bf36d599f5..debc5a7c8db6 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } if (cpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("failed to find OPP for %ld\n", freq_Hz); return PTR_ERR(opp); } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); } @@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void) */ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) ; + rcu_read_lock(); opp = opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); min_uV = opp_get_voltage(opp); opp = opp_find_freq_exact(cpu_dev, freq_table[i-1].frequency * 1000, true); max_uV = opp_get_voltage(opp); + rcu_read_unlock(); ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) transition_latency += ret * 1000; -- cgit From bcb27549f4185ca7d0168e201931613706ef2b83 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:34 +0000 Subject: PM / devfreq: add locking documentation for recommended_opp OPP pointers are protected by RCU locks, the pointer validity is permissible only under the section of rcu_read_lock to rcu_read_unlock Add documentation to the effect. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/devfreq.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 53766f39aadd..3b367973a802 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -994,6 +994,11 @@ module_exit(devfreq_exit); * @freq: The frequency given to target function * @flags: Flags handed from devfreq framework. * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) -- cgit From 8fa938acb318378463987b04be083dc2467e0480 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:35 +0000 Subject: PM / devfreq: exynos4_bus: honor RCU lock usage OPP pointers cannot be expected to be valid beyond the boundary of rcu_read_lock and rcu_read_unlock. Unfortunately, the current exynos4 busfreq driver does not honor the usage constraint and stores the OPP pointer in struct busfreq_data. This could potentially become invalid later such as: across devfreq opp change decisions, resulting in unpredictable behavior. To fix this, we introduce a busfreq specific busfreq_opp_info structure which is used to handle OPP information. OPP information is de-referenced to voltage and frequency pairs as needed into busfreq_opp_info structure and used as needed. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki --- drivers/devfreq/exynos4_bus.c | 94 ++++++++++++++++++++++++++++++------------- 1 file changed, 67 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 80c745e83082..46d94e9e95b5 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -73,6 +73,16 @@ enum busclk_level_idx { #define EX4210_LV_NUM (LV_2 + 1) #define EX4x12_LV_NUM (LV_4 + 1) +/** + * struct busfreq_opp_info - opp information for bus + * @rate: Frequency in hertz + * @volt: Voltage in microvolts corresponding to this OPP + */ +struct busfreq_opp_info { + unsigned long rate; + unsigned long volt; +}; + struct busfreq_data { enum exynos4_busf_type type; struct device *dev; @@ -80,7 +90,7 @@ struct busfreq_data { bool disabled; struct regulator *vdd_int; struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct opp *curr_opp; + struct busfreq_opp_info curr_oppinfo; struct exynos4_ppmu dmc[2]; struct notifier_block pm_notifier; @@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = { }; -static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4210_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4210_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk) + if (oppi->rate == exynos4210_busclk_table[index].clk) break; if (index == EX4210_LV_NUM) @@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) return 0; } -static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4x12_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk) + if (oppi->rate == exynos4x12_mifclk_table[index].clk) break; if (index == EX4x12_LV_NUM) @@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk) return -EINVAL; } -static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, - struct opp *oldopp) +static int exynos4_bus_setvolt(struct busfreq_data *data, + struct busfreq_opp_info *oppi, + struct busfreq_opp_info *oldoppi) { int err = 0, tmp; - unsigned long volt = opp_get_voltage(opp); + unsigned long volt = oppi->volt; switch (data->type) { case TYPE_BUSF_EXYNOS4210: @@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, if (err) break; - tmp = exynos4x12_get_intspec(opp_get_freq(opp)); + tmp = exynos4x12_get_intspec(oppi->rate); if (tmp < 0) { err = tmp; regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; } @@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, /* Try to recover */ if (err) regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; default: @@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp = devfreq_recommended_opp(dev, _freq, flags); - unsigned long freq = opp_get_freq(opp); - unsigned long old_freq = opp_get_freq(data->curr_opp); + struct opp *opp; + unsigned long freq; + unsigned long old_freq = data->curr_oppinfo.rate; + struct busfreq_opp_info new_oppinfo; - if (IS_ERR(opp)) + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + freq = new_oppinfo.rate; if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp)); + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); @@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq < freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; if (old_freq != freq) { switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq > freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; out: mutex_unlock(&data->lock); return err; @@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev, exynos4_read_ppmu(data); busier_dmc = exynos4_get_busier_dmc(data); - stat->current_frequency = opp_get_freq(data->curr_opp); + stat->current_frequency = data->curr_oppinfo.rate; if (busier_dmc) addr = S5P_VA_DMC1; @@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, struct busfreq_data *data = container_of(this, struct busfreq_data, pm_notifier); struct opp *opp; + struct busfreq_opp_info new_oppinfo; unsigned long maxfreq = ULONG_MAX; int err = 0; @@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, data->disabled = true; + rcu_read_lock(); opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(data->dev, "%s: unable to find a min freq\n", + __func__); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto unlock; switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, if (err) goto unlock; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; unlock: mutex_unlock(&data->lock); if (err) @@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev) } } + rcu_read_lock(); opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(dev, "Invalid initial frequency %lu kHz.\n", exynos4_devfreq_profile.initial_freq); return PTR_ERR(opp); } - data->curr_opp = opp; + data->curr_oppinfo.rate = opp_get_freq(opp); + data->curr_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); platform_set_drvdata(pdev, data); -- cgit From 9855d8ce41a7801548a05d844db2f46c3e810166 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Tue, 22 Jan 2013 13:37:21 +0100 Subject: ACPI: Check MSR valid bit before using P-state frequencies To fix incorrect P-state frequencies which can happen on some AMD systems f594065faf4f9067c2283a34619fc0714e79a98d "ACPI: Add fixups for AMD P-state figures" introduced a quirk to obtain the correct values by reading from AMD specific MSRs. This did cause a regression when running a kernel using that quirk under Xen which does (currently) not pass through MSR reads to the HW. Instead the guest gets a 0 in return. And this seems to cause a failure to initialize the ondemand governour (hard to say for sure as all P-states appear to run at the same frequency). While this should also be fixed in the hypervisor (to allow a guest to read that MSR), this patch is intended to work around the issue in the meantime. In discussion it turned out that indeed real HW/BIOSes may choose to not set the valid bit and thus mark the P-state as invalid. So this could be considered a fix for broken BIOSes that also works around the issue on Xen. Signed-off-by: Stefan Bader Cc: 3.7+ Acked-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_perflib.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 836bfe069042..53e7ac9403a7 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i) if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) || boot_cpu_data.x86 == 0x11) { rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); + /* + * MSR C001_0064+: + * Bit 63: PstateEn. Read-write. If set, the P-state is valid. + */ + if (!(hi & BIT(31))) + return; + fid = lo & 0x3f; did = (lo >> 6) & 7; if (boot_cpu_data.x86 == 0x10) -- cgit From 8b77b3762c37c9c2ce72f0d075890a3e8849702f Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 18 Jan 2013 15:31:05 +0800 Subject: Revert "pinctrl: single: support gpio request and free" This reverts commit 2e8b2eab94c35d83bb7da71c63b4695f32ddca88. Conflicts: drivers/pinctrl/pinctrl-single.c ERROR: "__aeabi_uldivmod" [drivers/pinctrl/pinctrl-single.ko] undefined!] On Fri, Jan 11, 2013 at 4:00 PM, Russell King wrote: > The above error happens in builds including pinctrl-single - the > reason > is this, where resource_size_t may be 64-bit. > > gpio->range.pin_base = (r.start - pcs->res->start) / > mux_bytes; > gpio->range.npins = (r.end - r.start) / mux_bytes + 1; The reason of not fixing this issue and reverting the patch instead is this patch can't handle another case. It's not easy to handle multiple gpios sharing one pin register. So this gpio range feature will be implemented by other patches. Acked-by: Tony Lindgren Signed-off-by: Haojian Zhuang Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-single.c | 79 +--------------------------------------- 1 file changed, 2 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index f6a360b86eb6..5c32e880bcb2 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -30,7 +30,6 @@ #define PCS_MUX_BITS_NAME "pinctrl-single,bits" #define PCS_REG_NAME_LEN ((sizeof(unsigned long) * 2) + 1) #define PCS_OFF_DISABLED ~0U -#define PCS_MAX_GPIO_VALUES 2 /** * struct pcs_pingroup - pingroups for a function @@ -77,16 +76,6 @@ struct pcs_function { struct list_head node; }; -/** - * struct pcs_gpio_range - pinctrl gpio range - * @range: subrange of the GPIO number space - * @gpio_func: gpio function value in the pinmux register - */ -struct pcs_gpio_range { - struct pinctrl_gpio_range range; - int gpio_func; -}; - /** * struct pcs_data - wrapper for data needed by pinctrl framework * @pa: pindesc array @@ -414,26 +403,9 @@ static void pcs_disable(struct pinctrl_dev *pctldev, unsigned fselector, } static int pcs_request_gpio(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range, unsigned pin) + struct pinctrl_gpio_range *range, unsigned offset) { - struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev); - struct pcs_gpio_range *gpio = NULL; - int end, mux_bytes; - unsigned data; - - gpio = container_of(range, struct pcs_gpio_range, range); - end = range->pin_base + range->npins - 1; - if (pin < range->pin_base || pin > end) { - dev_err(pctldev->dev, - "pin %d isn't in the range of %d to %d\n", - pin, range->pin_base, end); - return -EINVAL; - } - mux_bytes = pcs->width / BITS_PER_BYTE; - data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask; - data |= gpio->gpio_func; - pcs->write(data, pcs->base + pin * mux_bytes); - return 0; + return -ENOTSUPP; } static struct pinmux_ops pcs_pinmux_ops = { @@ -907,49 +879,6 @@ static void pcs_free_resources(struct pcs_device *pcs) static struct of_device_id pcs_of_match[]; -static int pcs_add_gpio_range(struct device_node *node, struct pcs_device *pcs) -{ - struct pcs_gpio_range *gpio; - struct device_node *child; - struct resource r; - const char name[] = "pinctrl-single"; - u32 gpiores[PCS_MAX_GPIO_VALUES]; - int ret, i = 0, mux_bytes = 0; - - for_each_child_of_node(node, child) { - ret = of_address_to_resource(child, 0, &r); - if (ret < 0) - continue; - memset(gpiores, 0, sizeof(u32) * PCS_MAX_GPIO_VALUES); - ret = of_property_read_u32_array(child, "pinctrl-single,gpio", - gpiores, PCS_MAX_GPIO_VALUES); - if (ret < 0) - continue; - gpio = devm_kzalloc(pcs->dev, sizeof(*gpio), GFP_KERNEL); - if (!gpio) { - dev_err(pcs->dev, "failed to allocate pcs gpio\n"); - return -ENOMEM; - } - gpio->range.name = devm_kzalloc(pcs->dev, sizeof(name), - GFP_KERNEL); - if (!gpio->range.name) { - dev_err(pcs->dev, "failed to allocate range name\n"); - return -ENOMEM; - } - memcpy((char *)gpio->range.name, name, sizeof(name)); - - gpio->range.id = i++; - gpio->range.base = gpiores[0]; - gpio->gpio_func = gpiores[1]; - mux_bytes = pcs->width / BITS_PER_BYTE; - gpio->range.pin_base = (r.start - pcs->res->start) / mux_bytes; - gpio->range.npins = (r.end - r.start) / mux_bytes + 1; - - pinctrl_add_gpio_range(pcs->pctl, &gpio->range); - } - return 0; -} - static int pcs_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -1046,10 +975,6 @@ static int pcs_probe(struct platform_device *pdev) goto free; } - ret = pcs_add_gpio_range(np, pcs); - if (ret < 0) - goto free; - dev_info(pcs->dev, "%i pins at pa %p size %u\n", pcs->desc.npins, pcs->base, pcs->size); -- cgit From 2c5de558cd228e6d9ae633fb318f18942c7248f1 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 02:32:58 +0200 Subject: i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 20d41bfa7c19..832f16e19f44 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -803,7 +803,7 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); dev->cmd_err |= OMAP_I2C_STAT_AL; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); } return -EIO; -- cgit From 9eb13cf3ecf67a0ff3114d6b66878a1149f96b7d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 20:37:02 +0200 Subject: i2c: omap: fix draining irq handling Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen Acked-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 832f16e19f44..4cc2f0528c88 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -963,7 +963,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) i2c_omap_errata_i207(dev, stat); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); - break; + continue; } if (stat & OMAP_I2C_STAT_RRDY) { @@ -989,7 +989,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) break; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); - break; + continue; } if (stat & OMAP_I2C_STAT_XRDY) { -- cgit From 9dd3162deb67e9d2dc08af8bedea61c41fae85a8 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 17 Jan 2013 12:31:04 +0200 Subject: i2c-designware: add missing MODULE_LICENSE The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index cbba7db9ad59..f5258c205de5 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -34,6 +34,7 @@ #include #include #include +#include #include "i2c-designware-core.h" /* @@ -725,3 +726,6 @@ u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) return dw_readl(dev, DW_IC_COMP_PARAM_1); } EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); + +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_LICENSE("GPL"); -- cgit From a17155bc9c9a43f94f4f502ad9776bf082219d84 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 6 Jan 2013 01:16:19 -0800 Subject: mfd: vexpress: Export global functions to fix build error Compiling vexpress client drivers as module results in error messages such as ERROR: "__vexpress_config_func_get" [drivers/hwmon/vexpress.ko] undefined! ERROR: "vexpress_config_func_put" [drivers/hwmon/vexpress.ko] undefined! This is because the global functions in drivers/mfd/vexpress-config.c are not exported. Fix it. Signed-off-by: Guenter Roeck Signed-off-by: Samuel Ortiz --- drivers/mfd/vexpress-config.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c index fae15d880758..3c1723aa6225 100644 --- a/drivers/mfd/vexpress-config.c +++ b/drivers/mfd/vexpress-config.c @@ -67,6 +67,7 @@ struct vexpress_config_bridge *vexpress_config_bridge_register( return bridge; } +EXPORT_SYMBOL(vexpress_config_bridge_register); void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge) { @@ -83,6 +84,7 @@ void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge) while (!list_empty(&__bridge.transactions)) cpu_relax(); } +EXPORT_SYMBOL(vexpress_config_bridge_unregister); struct vexpress_config_func { @@ -142,6 +144,7 @@ struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, return func; } +EXPORT_SYMBOL(__vexpress_config_func_get); void vexpress_config_func_put(struct vexpress_config_func *func) { @@ -149,7 +152,7 @@ void vexpress_config_func_put(struct vexpress_config_func *func) of_node_put(func->bridge->node); kfree(func); } - +EXPORT_SYMBOL(vexpress_config_func_put); struct vexpress_config_trans { struct vexpress_config_func *func; @@ -229,6 +232,7 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge, complete(&trans->completion); } +EXPORT_SYMBOL(vexpress_config_complete); int vexpress_config_wait(struct vexpress_config_trans *trans) { @@ -236,7 +240,7 @@ int vexpress_config_wait(struct vexpress_config_trans *trans) return trans->status; } - +EXPORT_SYMBOL(vexpress_config_wait); int vexpress_config_read(struct vexpress_config_func *func, int offset, u32 *data) -- cgit From 00441b5e6b98ad6a50b5cb7f88d473e3ea1e0d75 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 9 Jan 2013 10:06:03 +0000 Subject: mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/mfd/ab8500-core.c:1015:21: error: ‘ab8500_bm_data’ undeclared here include/linux/mfd/abx500/ab8500-bm.h:445:13: warning: ‘ab8500_fg_reinit’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:448:13: warning: ‘ab8500_charger_usb_state_changed’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:451:29: warning: ‘ab8500_btemp_get’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:455:12: warning: ‘ab8500_btemp_get_batctrl_temp’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:463:12: warning: ‘ab8500_fg_inst_curr_blocking’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:442:12: warning: ‘ab8500_fg_inst_curr_done’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:447:26: warning: ‘ab8500_fg_get’ defined but not used Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 1 + include/linux/mfd/abx500.h | 2 -- include/linux/mfd/abx500/ab8500-bm.h | 29 ++++------------------------- 3 files changed, 5 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index e1650badd106..4778bb124efe 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 2138bd33021a..e53dcfeaee69 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -272,8 +272,6 @@ struct abx500_bm_data { const struct abx500_fg_parameters *fg_params; }; -extern struct abx500_bm_data ab8500_bm_data; - enum { NTC_EXTERNAL = 0, NTC_INTERNAL, diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 44310c98ee6e..9bd037df97d9 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -422,7 +422,10 @@ struct ab8500_chargalg_platform_data { struct ab8500_btemp; struct ab8500_gpadc; struct ab8500_fg; + #ifdef CONFIG_AB8500_BM +extern struct abx500_bm_data ab8500_bm_data; + void ab8500_fg_reinit(void); void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); struct ab8500_btemp *ab8500_btemp_get(void); @@ -434,31 +437,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); int ab8500_fg_inst_curr_done(struct ab8500_fg *di); #else -int ab8500_fg_inst_curr_done(struct ab8500_fg *di) -{ -} -static void ab8500_fg_reinit(void) -{ -} -static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA) -{ -} -static struct ab8500_btemp *ab8500_btemp_get(void) -{ - return NULL; -} -static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) -{ - return 0; -} -struct ab8500_fg *ab8500_fg_get(void) -{ - return NULL; -} -static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev) -{ - return -ENODEV; -} +static struct abx500_bm_data ab8500_bm_data; static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) { -- cgit From 0f815a0a700bc10547449bde6c106051a035a1b9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 11:37:35 -0500 Subject: USB: UHCI: fix IRQ race during initialization This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern Reported-by: Don Zickus Tested-by: "Huang, Adrian (ISS Linux TW)" Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4b9e9aba2665..4f64d24eebc8 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -447,6 +447,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) return IRQ_NONE; uhci_writew(uhci, status, USBSTS); /* Clear it */ + spin_lock(&uhci->lock); + if (unlikely(!uhci->is_initialized)) /* not yet configured */ + goto done; + if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { if (status & USBSTS_HSE) dev_err(uhci_dev(uhci), "host system error, " @@ -455,7 +459,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " @@ -473,15 +476,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock(&uhci->lock); } } - if (status & USBSTS_RD) + if (status & USBSTS_RD) { + spin_unlock(&uhci->lock); usb_hcd_poll_rh_status(hcd); - else { - spin_lock(&uhci->lock); + } else { uhci_scan_schedule(uhci); + done: spin_unlock(&uhci->lock); } @@ -662,9 +665,9 @@ static int uhci_start(struct usb_hcd *hcd) */ mb(); + spin_lock_irq(&uhci->lock); configure_hc(uhci); uhci->is_initialized = 1; - spin_lock_irq(&uhci->lock); start_rh(uhci); spin_unlock_irq(&uhci->lock); return 0; -- cgit From 9ec6e9d3cb5192b11074f8adcedc10a6d410528a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 22 Jan 2013 11:59:58 -0500 Subject: USB: EHCI: Move definition of EHCI_STATS to ehci.h Without this, platform drivers e.g. ehci-omap.c will see a different version of struct ehci_hcd than ehci-hcd.c and break reference to 'debug_dir' and 'priv' members when CONFIG_USB_DEBUG is enabled. Signed-off-by: Roger Quadros Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 4 ---- drivers/usb/host/ehci.h | 4 ++++ 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c97503bb0b0e..104d6348377e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -74,10 +74,6 @@ static const char hcd_name [] = "ehci_hcd"; #undef VERBOSE_DEBUG #undef EHCI_URB_TRACE -#ifdef DEBUG -#define EHCI_STATS -#endif - /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9dadc7118d68..88f0142aea0c 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16; #endif /* statistics can be kept for tuning/monitoring */ +#ifdef DEBUG +#define EHCI_STATS +#endif + struct ehci_stats { /* irq usage */ unsigned long normal; -- cgit From 9ce45ef86c4c861841ba68b24341dbd9d6834c98 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:12 -0500 Subject: USB: EHCI: fix incorrect configuration test This patch (as1641) fixes a minor bug in ehci-hcd left over from when the Chipidea driver was converted to the "ehci-hcd is a library" scheme. The test for whether the Chipidea platform driver is active should be IS_ENABLED(), not defined(). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 104d6348377e..d09ff8f294fe 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1348,7 +1348,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !defined(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ -- cgit From 9debc1793b36124b9304255d2e8b5b6d8b491793 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:26 -0500 Subject: USB: EHCI: add a name for the platform-private field This patch (as1642) adds an ehci->priv field for private use by EHCI platform drivers. The space was provided some time ago, but it didn't have a name. Until now none of the platform drivers has used this private space, but that's about to change in the next patch of this series. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 88f0142aea0c..36c3a8210595 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -225,6 +225,9 @@ struct ehci_hcd { /* one per controller */ #ifdef DEBUG struct dentry *debug_dir; #endif + + /* platform-specific data -- must come last */ + unsigned long priv[0] __aligned(sizeof(s64)); }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ -- cgit From a05948f296ce103989b28a2606e47d2e287c3c89 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Jan 2013 06:33:05 +0000 Subject: netxen: fix off by one bug in netxen_release_tx_buffer() Christoph Paasch found netxen could trigger a BUG in its dismantle phase, in netxen_release_tx_buffer(), using full size TSO packets. cmd_buf->frag_count includes the skb->data part, so the loop must start at index 1 instead of 0, or else we can make an out of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2] Christoph provided the fixes in netxen_map_tx_skb() function. In case of a dma mapping error, its better to clear the dma fields so that we don't try to unmap them again in netxen_release_tx_buffer() Reported-by: Christoph Paasch Signed-off-by: Eric Dumazet Tested-by: Christoph Paasch Cc: Sony Chacko Cc: Rajesh Borundia Signed-off-by: Christoph Paasch Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 2 +- drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index bc165f4d0f65..695667d471a1 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -144,7 +144,7 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter) buffrag->length, PCI_DMA_TODEVICE); buffrag->dma = 0ULL; } - for (j = 0; j < cmd_buf->frag_count; j++) { + for (j = 1; j < cmd_buf->frag_count; j++) { buffrag++; if (buffrag->dma) { pci_unmap_page(adapter->pdev, buffrag->dma, diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 6098fd4adfeb..69e321a65077 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1963,10 +1963,12 @@ unwind: while (--i >= 0) { nf = &pbuf->frag_array[i+1]; pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE); + nf->dma = 0ULL; } nf = &pbuf->frag_array[0]; pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE); + nf->dma = 0ULL; out_err: return -ENOMEM; -- cgit From fa4cffcba9e13798ed7c6b8526b91b1631ecb53e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Jan 2013 11:45:15 +0100 Subject: iwlegacy: fix IBSS cleanup We do not correctly change interface type when switching from IBSS mode to STA mode, that results in microcode errors. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=886946 Reported-by: Jaroslav Skarvada Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/common.c | 35 ++++++++++++++-------------------- 1 file changed, 14 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 7e16d10a7f14..90b8970eadf0 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3958,17 +3958,21 @@ il_connection_init_rx_config(struct il_priv *il) memset(&il->staging, 0, sizeof(il->staging)); - if (!il->vif) { + switch (il->iw_mode) { + case NL80211_IFTYPE_UNSPECIFIED: il->staging.dev_type = RXON_DEV_TYPE_ESS; - } else if (il->vif->type == NL80211_IFTYPE_STATION) { + break; + case NL80211_IFTYPE_STATION: il->staging.dev_type = RXON_DEV_TYPE_ESS; il->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - } else if (il->vif->type == NL80211_IFTYPE_ADHOC) { + break; + case NL80211_IFTYPE_ADHOC: il->staging.dev_type = RXON_DEV_TYPE_IBSS; il->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; il->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; - } else { + break; + default: IL_ERR("Unsupported interface type %d\n", il->vif->type); return; } @@ -4550,8 +4554,7 @@ out: EXPORT_SYMBOL(il_mac_add_interface); static void -il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, - bool mode_change) +il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif) { lockdep_assert_held(&il->mutex); @@ -4560,9 +4563,7 @@ il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, il_force_scan_end(il); } - if (!mode_change) - il_set_mode(il); - + il_set_mode(il); } void @@ -4575,8 +4576,8 @@ il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) WARN_ON(il->vif != vif); il->vif = NULL; - - il_teardown_interface(il, vif, false); + il->iw_mode = NL80211_IFTYPE_UNSPECIFIED; + il_teardown_interface(il, vif); memset(il->bssid, 0, ETH_ALEN); D_MAC80211("leave\n"); @@ -4685,18 +4686,10 @@ il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } /* success */ - il_teardown_interface(il, vif, true); vif->type = newtype; vif->p2p = false; - err = il_set_mode(il); - WARN_ON(err); - /* - * We've switched internally, but submitting to the - * device may have failed for some reason. Mask this - * error, because otherwise mac80211 will not switch - * (and set the interface type back) and we'll be - * out of sync with it. - */ + il->iw_mode = newtype; + il_teardown_interface(il, vif); err = 0; out: -- cgit From 430d25251ef3c36404e6b4a7eaaae35e225bc8e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 19 Jan 2013 12:36:49 -0600 Subject: rtlwifi: Fix build warning introduced by commit a290593 The kbuild test robot reports the following warning with x86_64-randconfig-x955: warning: (RTL8192CE && RTL8192SE && RTL8192DE && RTL8723AE && RTL8192CU) selects RTLWIFI which has unmet direct dependencies (NETDEVICES && WLAN && (RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE)) This warning was introduced in commit a290593, "rtlwifi: Modify files for addition of rtl8723ae", and is d ue to a missing dependence of RTLWIFI on RTL8723AE. Signed-off-by: Larry Finger Cc: kbuild test robot Reported-by: kbuild test robot Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index 21b1bbb93a7e..b80bc4612581 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -57,12 +57,12 @@ config RTL8192CU config RTLWIFI tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default m config RTLWIFI_DEBUG bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default y config RTL8192C_COMMON -- cgit From 4a8f199508d79ff8a7d1e22f47b912baaf225336 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:20 +0100 Subject: ath9k_hw: fix calibration issues on chainmask that don't include chain 0 Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 ++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 8b0d8dcd7625..56317b0fb6b6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -976,6 +976,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, AR_PHY_CL_TAB_1, AR_PHY_CL_TAB_2 }; + ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); + if (rtt) { if (!ar9003_hw_rtt_restore(ah, chan)) run_rtt_cal = true; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ce19c09fa8e8..8290eddaf0e3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -586,7 +586,7 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, ath9k_hw_synth_delay(ah, chan, synthDelay); } -static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { switch (rx) { case 0x5: diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f1a8e91c908..9d26fc56ca56 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1066,6 +1066,7 @@ void ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain); int ar9003_paprd_init_table(struct ath_hw *ah); bool ar9003_paprd_is_done(struct ath_hw *ah); bool ar9003_is_paprd_enabled(struct ath_hw *ah); +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx); /* Hardware family op attach helpers */ void ar5008_hw_attach_phy_ops(struct ath_hw *ah); -- cgit From 24171dd92096fc370b195f3f6bdc0798855dc3f9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:21 +0100 Subject: ath9k_hw: fix chain swap setting when setting rx chainmask to 5 Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 8290eddaf0e3..3afc24bde6d6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -588,30 +588,17 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { - switch (rx) { - case 0x5: + if (ah->caps.tx_chainmask == 5 || ah->caps.rx_chainmask == 5) REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN); - case 0x3: - case 0x1: - case 0x2: - case 0x7: - REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); - REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); - break; - default: - break; - } + + REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); + REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7)) - REG_WRITE(ah, AR_SELFGEN_MASK, 0x3); - else - REG_WRITE(ah, AR_SELFGEN_MASK, tx); + tx = 3; - if (tx == 0x5) { - REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, - AR_PHY_SWAP_ALT_CHAIN); - } + REG_WRITE(ah, AR_SELFGEN_MASK, tx); } /* -- cgit From fea92cbf0850d788683827990670d3968f893327 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:22 +0100 Subject: ath9k: allow setting arbitrary antenna masks on AR9003+ Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3796e65c26f1..dd91f8fdc01c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1826,6 +1826,9 @@ static u32 fill_chainmask(u32 cap, u32 new) static bool validate_antenna_mask(struct ath_hw *ah, u32 val) { + if (AR_SREV_9300_20_OR_LATER(ah)) + return true; + switch (val & 0x7) { case 0x1: case 0x3: -- cgit From 83f0c6d1f502bd75bb4a9e31e8d64e59c6894ad1 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 21 Jan 2013 21:04:10 -0800 Subject: mwifiex: fix typo in PCIe adapter NULL check Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Reviewed-by: Sergey V. Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 13fbc4eb1595..b879e1338a54 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -161,7 +161,7 @@ static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state) if (pdev) { card = (struct pcie_service_card *) pci_get_drvdata(pdev); - if (!card || card->adapter) { + if (!card || !card->adapter) { pr_err("Card or adapter structure is not valid\n"); return 0; } -- cgit From efa17194581bdfca0986dabc178908bd7c21ba00 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 22 Jan 2013 22:33:46 +0100 Subject: cpufreq: Add module aliases for acpi-cpufreq The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett Tested-by: Leonid Isaev Acked-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/acpi-cpufreq.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 0d048f6a2b23..7b0d49d78c61 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict, late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); +static const struct x86_cpu_id acpi_cpufreq_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_ACPI), + X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + MODULE_ALIAS("acpi"); -- cgit From 1c8c38c588ea91f8deeae21284840459d1bb58e3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 20 Jan 2013 16:11:20 +0000 Subject: drm/i915: Disable AsyncFlip performance optimisations This is a required workarounds for all products, especially on gen6+ where it causes the command streamer to fail to parse instructions following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising between the GPU and the display engines, and so this bit being unset may cause hangs. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 19 +++++++++++++------ 2 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b401788e1791..59afb7eb6db6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -533,6 +533,7 @@ #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) # define MI_FLUSH_ENABLE (1 << 12) +# define ASYNC_FLIP_PERF_DISABLE (1 << 14) #define GEN6_GT_MODE 0x20d0 #define GEN6_GT_MODE_HI (1 << 9) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index ae253e04c391..1f46a8bf2b05 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -505,13 +505,20 @@ static int init_render_ring(struct intel_ring_buffer *ring) struct drm_i915_private *dev_priv = dev->dev_private; int ret = init_ring_common(ring); - if (INTEL_INFO(dev)->gen > 3) { + if (INTEL_INFO(dev)->gen > 3) I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH)); - if (IS_GEN7(dev)) - I915_WRITE(GFX_MODE_GEN7, - _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | - _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); - } + + /* We need to disable the AsyncFlip performance optimisations in order + * to use MI_WAIT_FOR_EVENT within the CS. It should already be + * programmed to '1' on all products. + */ + if (INTEL_INFO(dev)->gen >= 6) + I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); + + if (IS_GEN7(dev)) + I915_WRITE(GFX_MODE_GEN7, + _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | + _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); if (INTEL_INFO(dev)->gen >= 5) { ret = init_pipe_control(ring); -- cgit From f05bb0c7b624252a5e768287e340e8e45df96e42 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 20 Jan 2013 16:33:32 +0000 Subject: drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1, the hardware can not program the scanline values. Those scanline values then control when the signal is sent from the display engine to the render ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB invalidations must be performed explicitly through the appropriate bits being set in PIPE_CONTROL. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 1f46a8bf2b05..42ff97d667d2 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -515,6 +515,11 @@ static int init_render_ring(struct intel_ring_buffer *ring) if (INTEL_INFO(dev)->gen >= 6) I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); + /* Required for the hardware to program scanline values for waiting */ + if (INTEL_INFO(dev)->gen == 6) + I915_WRITE(GFX_MODE, + _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS)); + if (IS_GEN7(dev)) I915_WRITE(GFX_MODE_GEN7, _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | -- cgit From 9452618e7462181ed9755236803b6719298a13ce Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 20 Jan 2013 23:50:13 +0100 Subject: iommu/intel: disable DMAR for g4x integrated gfx DMAR support on g4x/gm45 integrated gpus seems to be totally busted. So don't bother, but instead disable it by default to allow distros to unconditionally enable DMAR support. v2: Actually wire up the right quirk entry, spotted by Adam Jackson. Note that according to intel marketing materials only g45 and gm45 support DMAR/VT-d. So we have reports for all relevant gen4 pci ids by now. Still, keep all the other gen4 ids in the quirk table in case the marketing stuff confused me again, which would not be the first time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51921 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Cc: Adam Jackson Cc: David Woodhouse Cc: stable@vger.kernel.org Acked-By: David Woodhouse Tested-by: stathis Tested-by: Mihai Moldovan Signed-off-by: Daniel Vetter --- drivers/iommu/intel-iommu.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index b9d091157884..eca28014ef3e 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4234,6 +4234,21 @@ static struct iommu_ops intel_iommu_ops = { .pgsize_bitmap = INTEL_IOMMU_PGSIZES, }; +static void quirk_iommu_g4x_gfx(struct pci_dev *dev) +{ + /* G4x/GM45 integrated gfx dmar support is totally busted. */ + printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n"); + dmar_map_gfx = 0; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_g4x_gfx); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_g4x_gfx); + static void quirk_iommu_rwbf(struct pci_dev *dev) { /* @@ -4242,12 +4257,6 @@ static void quirk_iommu_rwbf(struct pci_dev *dev) */ printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n"); rwbf_quirk = 1; - - /* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */ - if (dev->revision == 0x07) { - printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n"); - dmar_map_gfx = 0; - } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); -- cgit From d6f620a457aa4c5c2e8d1a079a1236216c445aba Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 15 Jan 2013 19:44:26 +0100 Subject: clk: mvebu/clk-cpu.c: fix memory leakage the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding Acked-by: Jason Cooper Acked-by: Gregory CLEMENT Acked-by: Mike Turquette Signed-off-by: Jason Cooper --- drivers/clk/mvebu/clk-cpu.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index ff004578a119..9dd2551a0a41 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node) clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); if (WARN_ON(!clks)) - return; + goto clks_out; for_each_node_by_type(dn, "cpu") { struct clk_init_data init; @@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node) int cpu, err; if (WARN_ON(!clk_name)) - return; + goto bail_out; err = of_property_read_u32(dn, "reg", &cpu); if (WARN_ON(err)) - return; + goto bail_out; sprintf(clk_name, "cpu%d", cpu); parent_clk = of_clk_get(node, 0); @@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node) return; bail_out: kfree(clks); + while(ncpus--) + kfree(cpuclk[ncpus].clk_name); +clks_out: kfree(cpuclk); } -- cgit From f42abc72da2e77efefd547562a92ddd18926b48b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 16 Jan 2013 14:13:56 +0100 Subject: mmc: mvsdio: use devm_ API to simplify/correct error paths. There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- drivers/mmc/host/mvsdio.c | 92 ++++++++++++++++------------------------------- 1 file changed, 30 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index de4c20b3936c..f8dd36102949 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -50,8 +50,6 @@ struct mvsd_host { struct timer_list timer; struct mmc_host *mmc; struct device *dev; - struct resource *res; - int irq; struct clk *clk; int gpio_card_detect; int gpio_write_protect; @@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev) if (!r || irq < 0 || !mvsd_data) return -ENXIO; - r = request_mem_region(r->start, SZ_1K, DRIVER_NAME); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; @@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->res = r; host->base_clock = mvsd_data->clock / 2; + host->clk = ERR_PTR(-EINVAL); mmc->ops = &mvsd_ops; @@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = ioremap(r->start, SZ_4K); + host->base = devm_request_and_ioremap(&pdev->dev, r); if (!host->base) { ret = -ENOMEM; goto out; @@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev) mvsd_power_down(host); - ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host); if (ret) { pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq); goto out; - } else - host->irq = irq; + } /* Not all platforms can gate the clock, so it is not an error if the clock does not exists. */ - host->clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) { + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) clk_prepare_enable(host->clk); - } if (mvsd_data->gpio_card_detect) { - ret = gpio_request(mvsd_data->gpio_card_detect, - DRIVER_NAME " cd"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_card_detect, + GPIOF_IN, DRIVER_NAME " cd"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_card_detect); irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = request_irq(irq, mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); + ret = devm_request_irq(&pdev->dev, irq, + mvsd_card_detect_irq, + IRQ_TYPE_EDGE_RISING | + IRQ_TYPE_EDGE_FALLING, + DRIVER_NAME " cd", host); if (ret == 0) host->gpio_card_detect = mvsd_data->gpio_card_detect; else - gpio_free(mvsd_data->gpio_card_detect); + devm_gpio_free(&pdev->dev, + mvsd_data->gpio_card_detect); } } if (!host->gpio_card_detect) mmc->caps |= MMC_CAP_NEEDS_POLL; if (mvsd_data->gpio_write_protect) { - ret = gpio_request(mvsd_data->gpio_write_protect, - DRIVER_NAME " wp"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_write_protect, + GPIOF_IN, DRIVER_NAME " wp"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_write_protect); host->gpio_write_protect = mvsd_data->gpio_write_protect; } @@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev) return 0; out: - if (host) { - if (host->irq) - free_irq(host->irq, host); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - if (host->base) - iounmap(host->base); - } - if (r) - release_resource(r); - if (mmc) - if (!IS_ERR_OR_NULL(host->clk)) { + if (mmc) { + if (!IS_ERR(host->clk)) clk_disable_unprepare(host->clk); - clk_put(host->clk); - } mmc_free_host(mmc); + } return ret; } @@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - if (mmc) { - struct mvsd_host *host = mmc_priv(mmc); + struct mvsd_host *host = mmc_priv(mmc); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - mmc_remove_host(mmc); - free_irq(host->irq, host); - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - del_timer_sync(&host->timer); - mvsd_power_down(host); - iounmap(host->base); - release_resource(host->res); + mmc_remove_host(mmc); + del_timer_sync(&host->timer); + mvsd_power_down(host); + + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); - if (!IS_ERR(host->clk)) { - clk_disable_unprepare(host->clk); - clk_put(host->clk); - } - mmc_free_host(mmc); - } platform_set_drvdata(pdev, NULL); return 0; } -- cgit From a7e2ca17039edb5f782be519eaf9d8ea500ba7cc Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 21 Jan 2013 13:12:42 +0200 Subject: Revert "drivers/misc/ti-st: remove gpio handling" This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable [3.7] Acked-by: Tony Lindgren Signed-off-by: Luciano Coelho Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 9ff942a346ed..83269f1d16e3 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -468,6 +468,11 @@ long st_kim_start(void *kim_data) if (pdata->chip_enable) pdata->chip_enable(kim_gdata); + /* Configure BT nShutdown to HIGH state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(5); /* FIXME: a proper toggle */ + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(100); /* re-initialize the completion */ INIT_COMPLETION(kim_gdata->ldisc_installed); /* send notification to UIM */ @@ -509,7 +514,8 @@ long st_kim_start(void *kim_data) * (b) upon failure to either install ldisc or download firmware. * The function is responsible to (a) notify UIM about un-installation, * (b) flush UART if the ldisc was installed. - * (c) invoke platform's chip disabling routine. + * (c) reset BT_EN - pull down nshutdown at the end. + * (d) invoke platform's chip disabling routine. */ long st_kim_stop(void *kim_data) { @@ -541,6 +547,13 @@ long st_kim_stop(void *kim_data) err = -ETIMEDOUT; } + /* By default configure BT nShutdown to LOW state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + /* platform specific disable */ if (pdata->chip_disable) pdata->chip_disable(kim_gdata); @@ -733,6 +746,20 @@ static int kim_probe(struct platform_device *pdev) /* refer to itself */ kim_gdata->core_data->kim_data = kim_gdata; + /* Claim the chip enable nShutdown gpio from the system */ + kim_gdata->nshutdown = pdata->nshutdown_gpio; + err = gpio_request(kim_gdata->nshutdown, "kim"); + if (unlikely(err)) { + pr_err(" gpio %ld request failed ", kim_gdata->nshutdown); + return err; + } + + /* Configure nShutdown GPIO as output=0 */ + err = gpio_direction_output(kim_gdata->nshutdown, 0); + if (unlikely(err)) { + pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown); + return err; + } /* get reference of pdev for request_firmware */ kim_gdata->kim_pdev = pdev; @@ -779,10 +806,18 @@ err_core_init: static int kim_remove(struct platform_device *pdev) { + /* free the GPIOs requested */ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; struct kim_data_s *kim_gdata; kim_gdata = dev_get_drvdata(&pdev->dev); + /* Free the Bluetooth/FM/GPIO + * nShutdown gpio from the system + */ + gpio_free(pdata->nshutdown_gpio); + pr_info("nshutdown GPIO Freed"); + debugfs_remove_recursive(kim_debugfs_dir); sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp); pr_info("sysfs entries removed"); -- cgit From 4518f611ba21ba165ea3714055938a8984a44ff9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 23 Jan 2013 16:16:35 +0100 Subject: drm/i915: dump UTS_RELEASE into the error_state Useful for statistics or on overflowing bug reports to keep things all lined up. Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 7944d301518a..9d4a2c2adf0e 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "intel_drv.h" #include "intel_ringbuffer.h" @@ -690,6 +691,7 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec, error->time.tv_usec); + seq_printf(m, "Kernel: " UTS_RELEASE); seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device); seq_printf(m, "EIR: 0x%08x\n", error->eir); seq_printf(m, "IER: 0x%08x\n", error->ier); -- cgit From 844e88f04410cc4e85615db519c1d44089333c4f Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 23 Jan 2013 00:57:02 +0000 Subject: net: cdc_mbim: send ZLP only for the specific buggy device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reverting 328d7b8 and instead adding an exception for the Sierra Wireless MC7710. commit 328d7b8 (net: cdc_mbim: send ZLP after max sized NTBs) added a workaround for an issue observed on one specific device. Concerns were raised that this workaround adds a performance penalty to all devices based on questionable, if not buggy, behaviour of a single device: "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU load, increasing interrupt load by factor of 2 in high load traffic scenario and possibly decreasing throughput for all other devices which behaves correctly." "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly dwNtbOutMaxSize, it's known, you can submit such request on the receiver side and you do not need any EOT indicatation, so the frametime can be used for useful data." Adding a device specific exception to prevent the workaround from affecting well behaved devices. The assumption here is that needing a ZLP is truly an *exception*. We do not yet have enough data to verify this. The generic workaround in commit 328d7b8 should be considered acceptable despite the performance penalty if the exception list becomes a maintainance hassle. Cc: Alexey ORISHKO Cc: Yauheni Kaliuta Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 3a5673aa1c37..248d2dc765a5 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -365,6 +365,21 @@ err: } static const struct driver_info cdc_mbim_info = { + .description = "CDC MBIM", + .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN, + .bind = cdc_mbim_bind, + .unbind = cdc_mbim_unbind, + .manage_power = cdc_mbim_manage_power, + .rx_fixup = cdc_mbim_rx_fixup, + .tx_fixup = cdc_mbim_tx_fixup, +}; + +/* MBIM and NCM devices should not need a ZLP after NTBs with + * dwNtbOutMaxSize length. This driver_info is for the exceptional + * devices requiring it anyway, allowing them to be supported without + * forcing the performance penalty on all the sane devices. + */ +static const struct driver_info cdc_mbim_info_zlp = { .description = "CDC MBIM", .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP, .bind = cdc_mbim_bind, @@ -385,6 +400,10 @@ static const struct usb_device_id mbim_devs[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info, }, + /* Sierra Wireless MC7710 need ZLPs */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68a2, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&cdc_mbim_info_zlp, + }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info, }, -- cgit From edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 23 Jan 2013 03:59:12 +0000 Subject: tuntap: reduce memory using of queues A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel Cc: Eric Dumazet Cc: David Woodhouse Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index c81680dc10eb..8939d2117de2 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -109,11 +109,10 @@ struct tap_filter { unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN]; }; -/* 1024 is probably a high enough limit: modern hypervisors seem to support on - * the order of 100-200 CPUs so this leaves us some breathing space if we want - * to match a queue per guest CPU. - */ -#define MAX_TAP_QUEUES 1024 +/* DEFAULT_MAX_NUM_RSS_QUEUES were choosed to let the rx/tx queues allocated for + * the netdevice to be fit in one page. So we can make sure the success of + * memory allocation. TODO: increase the limit. */ +#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES #define TUN_FLOW_EXPIRE (3 * HZ) @@ -1583,6 +1582,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else { char *name; unsigned long flags = 0; + int queues = ifr->ifr_flags & IFF_MULTI_QUEUE ? + MAX_TAP_QUEUES : 1; if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) return -EPERM; @@ -1606,8 +1607,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) name = ifr->ifr_name; dev = alloc_netdev_mqs(sizeof(struct tun_struct), name, - tun_setup, - MAX_TAP_QUEUES, MAX_TAP_QUEUES); + tun_setup, queues, queues); + if (!dev) return -ENOMEM; -- cgit From b8732fb7f8920e2f6216d2b67faf8b0b0d67ca81 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 23 Jan 2013 03:59:13 +0000 Subject: tuntap: limit the number of flow caches We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8939d2117de2..cc09b67c23bc 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -113,6 +113,7 @@ struct tap_filter { * the netdevice to be fit in one page. So we can make sure the success of * memory allocation. TODO: increase the limit. */ #define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES +#define MAX_TAP_FLOWS 4096 #define TUN_FLOW_EXPIRE (3 * HZ) @@ -185,6 +186,7 @@ struct tun_struct { unsigned int numdisabled; struct list_head disabled; void *security; + u32 flow_count; }; static inline u32 tun_hashfn(u32 rxhash) @@ -218,6 +220,7 @@ static struct tun_flow_entry *tun_flow_create(struct tun_struct *tun, e->queue_index = queue_index; e->tun = tun; hlist_add_head_rcu(&e->hash_link, head); + ++tun->flow_count; } return e; } @@ -228,6 +231,7 @@ static void tun_flow_delete(struct tun_struct *tun, struct tun_flow_entry *e) e->rxhash, e->queue_index); hlist_del_rcu(&e->hash_link); kfree_rcu(e, rcu); + --tun->flow_count; } static void tun_flow_flush(struct tun_struct *tun) @@ -317,7 +321,8 @@ static void tun_flow_update(struct tun_struct *tun, u32 rxhash, e->updated = jiffies; } else { spin_lock_bh(&tun->lock); - if (!tun_flow_find(head, rxhash)) + if (!tun_flow_find(head, rxhash) && + tun->flow_count < MAX_TAP_FLOWS) tun_flow_create(tun, head, rxhash, queue_index); if (!timer_pending(&tun->flow_gc_timer)) -- cgit From e521a29014794d139cca46396d1af8faf1295a26 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 21 Jan 2013 15:50:03 -0500 Subject: drm/radeon: fix cursor corruption on DCE6 and newer Aruba and newer gpu does not need the avivo cursor work around, quite the opposite this work around lead to corruption. agd5f: check DCE6 rather than ARUBA since the issue is DCE version specific rather than family specific. Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_cursor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index ad6df625e8b8..0d67674b64b1 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -241,7 +241,8 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, y = 0; } - if (ASIC_IS_AVIVO(rdev)) { + /* fixed on DCE6 and newer */ + if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE6(rdev)) { int i = 0; struct drm_crtc *crtc_p; -- cgit From b2f4b03f8a378cd626d2ea67d19e7470c050a098 Mon Sep 17 00:00:00 2001 From: xueminsu Date: Tue, 22 Jan 2013 22:16:53 +0800 Subject: radeon_display: Use pointer return error codes drm_mode_addfb() expects fb_create return error code instead of NULL. Signed-off-by: xueminsu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 1da2386d7cf7..ff3def784619 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1122,7 +1122,7 @@ radeon_user_framebuffer_create(struct drm_device *dev, if (ret) { kfree(radeon_fb); drm_gem_object_unreference_unlocked(obj); - return NULL; + return ERR_PTR(ret); } return &radeon_fb->base; -- cgit From 5d0feaff230c0abfe4a112e6f09f096ed99e0b2d Mon Sep 17 00:00:00 2001 From: Timo Teräs Date: Mon, 21 Jan 2013 22:30:35 +0000 Subject: r8169: remove the obsolete and incorrect AMD workaround MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was introduced in commit 6dccd16 "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by: Timo Teräs Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index ed96f309bca8..c28bc318cec6 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6111,13 +6111,6 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } - - /* Work around for AMD plateform. */ - if ((desc->opts2 & cpu_to_le32(0xfffe000)) && - (tp->mac_version == RTL_GIGA_MAC_VER_05)) { - desc->opts2 = 0; - cur_rx++; - } } count = cur_rx - tp->cur_rx; -- cgit From dba63b2f733ebfd89bbb15e8fe8ca10fd3871a7f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Jan 2013 13:26:15 -0500 Subject: USB: EHCI: fix build error in ehci-mxc This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-hcd.c | 6 +-- drivers/usb/host/ehci-mxc.c | 120 ++++++++++++++++++-------------------------- 4 files changed, 53 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d6bb128ce21e..3a21c5d683c0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -148,7 +148,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale i.MX on-chip EHCI USB controller" + tristate "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1eb4c3006e9e..001fbff2fdef 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d09ff8f294fe..09537b2f1002 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1246,11 +1246,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_fsl_driver #endif -#ifdef CONFIG_USB_EHCI_MXC -#include "ehci-mxc.c" -#define PLATFORM_DRIVER ehci_mxc_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver @@ -1349,6 +1344,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ec7f5d2c90de..dedb80bb8d40 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -17,75 +17,38 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include #include #include #include #include #include #include +#include +#include #include #include +#include "ehci.h" + +#define DRIVER_DESC "Freescale On-Chip EHCI Host driver" + +static const char hcd_name[] = "ehci-mxc"; + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { struct clk *usbclk, *ahbclk, *phyclk; - struct usb_hcd *hcd; }; -/* called during probe() after chip reset completes */ -static int ehci_mxc_setup(struct usb_hcd *hcd) -{ - hcd->has_tt = 1; - - return ehci_setup(hcd); -} +static struct hc_driver __read_mostly ehci_mxc_hc_driver; -static const struct hc_driver ehci_mxc_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ehci_mxc_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_mxc_priv), }; static int ehci_mxc_drv_probe(struct platform_device *pdev) @@ -112,12 +75,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto err_alloc; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); @@ -135,6 +92,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_alloc; } + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + priv = (struct ehci_mxc_priv *) ehci->priv; + /* enable clocks */ priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { @@ -169,8 +130,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) mdelay(10); } - ehci = hcd_to_ehci(hcd); - /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; ehci->regs = hcd->regs + 0x100 + @@ -198,8 +157,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } } - priv->hcd = hcd; - platform_set_drvdata(pdev, priv); + platform_set_drvdata(pdev, hcd); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) @@ -244,8 +202,11 @@ err_alloc: static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv; + + usb_remove_hcd(hcd); if (pdata && pdata->exit) pdata->exit(pdev); @@ -253,23 +214,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) if (pdata->otg) usb_phy_shutdown(pdata->otg); - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - clk_disable_unprepare(priv->usbclk); clk_disable_unprepare(priv->ahbclk); if (priv->phyclk) clk_disable_unprepare(priv->phyclk); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); return 0; } static void ehci_mxc_drv_shutdown(struct platform_device *pdev) { - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -279,9 +237,31 @@ MODULE_ALIAS("platform:mxc-ehci"); static struct platform_driver ehci_mxc_driver = { .probe = ehci_mxc_drv_probe, - .remove = __exit_p(ehci_mxc_drv_remove), + .remove = ehci_mxc_drv_remove, .shutdown = ehci_mxc_drv_shutdown, .driver = { .name = "mxc-ehci", }, }; + +static int __init ehci_mxc_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides); + return platform_driver_register(&ehci_mxc_driver); +} +module_init(ehci_mxc_init); + +static void __exit ehci_mxc_cleanup(void) +{ + platform_driver_unregister(&ehci_mxc_driver); +} +module_exit(ehci_mxc_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Sascha Hauer"); +MODULE_LICENSE("GPL"); -- cgit From 1da80cfa8727abf404fcee44d04743febea54069 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Wed, 23 Jan 2013 13:59:05 -0500 Subject: drm/radeon: fix a rare case of double kfree If one (but not both) allocations of p->chunks[].kpage[] in radeon_cs_parser_init fail, the error path will free the successfully allocated page, but leave a stale pointer value in the kpage[] field. This will later cause a double-free when radeon_cs_parser_fini is called. This patch fixes the issue by forcing both pointers to NULL after kfree in the error path. The circumstances under which the problem happens are very rare. The card must be AGP and the system must run out of kmalloc area just at the right time so that one allocation succeeds, while the other fails. Signed-off-by: Ilija Hadzic Cc: Herton Ronaldo Krzesinski Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_cs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 469661fd1903..5407459e56d2 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -286,6 +286,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) p->chunks[p->chunk_ib_idx].kpage[1] == NULL) { kfree(p->chunks[p->chunk_ib_idx].kpage[0]); kfree(p->chunks[p->chunk_ib_idx].kpage[1]); + p->chunks[p->chunk_ib_idx].kpage[0] = NULL; + p->chunks[p->chunk_ib_idx].kpage[1] = NULL; return -ENOMEM; } } -- cgit From 55ebbb59c1c6eb1b040f62b8c4ae0b724de6e55a Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Tue, 22 Jan 2013 21:42:18 -0600 Subject: DM-RAID: Fix RAID10's check for sufficient redundancy Before attempting to activate a RAID array, it is checked for sufficient redundancy. That is, we make sure that there are not too many failed devices - or devices specified for rebuild - to undermine our ability to activate the array. The current code performs this check twice - once to ensure there were not too many devices specified for rebuild by the user ('validate_rebuild_devices') and again after possibly experiencing a failure to read the superblock ('analyse_superblocks'). Neither of these checks are sufficient. The first check is done properly but with insufficient information about the possible failure state of the devices to make a good determination if the array can be activated. The second check is simply done wrong in the case of RAID10 because it doesn't account for the independence of the stripes (i.e. mirror sets). The solution is to use the properly written check ('validate_rebuild_devices'), but perform the check after the superblocks have been read and we know which devices have failed. This gives us one check instead of two and performs it in a location where it can be done right. Only RAID10 was affected and it was affected in the following ways: - the code did not properly catch the condition where a user specified a device for rebuild that already had a failed device in the same mirror set. (This condition would, however, be caught at a deeper level in MD.) - the code triggers a false positive and denies activation when devices in independent mirror sets have failed - counting the failures as though they were all in the same set. The most likely place this error was introduced (or this patch should have been included) is in commit 4ec1e369 - first introduced in v3.7-rc1. Consequently this fix should also go in v3.7.y, however there is a small conflict on the .version in raid_target, so I'll submit a separate patch to -stable. Cc: stable@vger.kernel.org Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown --- Documentation/device-mapper/dm-raid.txt | 1 + drivers/md/dm-raid.c | 101 ++++++++++++-------------------- 2 files changed, 38 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 728c38c242d6..56fb62b09fc5 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -141,3 +141,4 @@ Version History 1.2.0 Handle creation of arrays that contain failed devices. 1.3.0 Added support for RAID 10 1.3.1 Allow device replacement/rebuild for RAID 10 +1.3.2 Fix/improve redundancy checking for RAID10 diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 3d8984edeff7..9e58dbd8d8cb 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -340,24 +340,22 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size) } /* - * validate_rebuild_devices + * validate_raid_redundancy * @rs * - * Determine if the devices specified for rebuild can result in a valid - * usable array that is capable of rebuilding the given devices. + * Determine if there are enough devices in the array that haven't + * failed (or are being rebuilt) to form a usable array. * * Returns: 0 on success, -EINVAL on failure. */ -static int validate_rebuild_devices(struct raid_set *rs) +static int validate_raid_redundancy(struct raid_set *rs) { unsigned i, rebuild_cnt = 0; unsigned rebuilds_per_group, copies, d; - if (!(rs->print_flags & DMPF_REBUILD)) - return 0; - for (i = 0; i < rs->md.raid_disks; i++) - if (!test_bit(In_sync, &rs->dev[i].rdev.flags)) + if (!test_bit(In_sync, &rs->dev[i].rdev.flags) || + !rs->dev[i].rdev.sb_page) rebuild_cnt++; switch (rs->raid_type->level) { @@ -393,27 +391,24 @@ static int validate_rebuild_devices(struct raid_set *rs) * A A B B C * C D D E E */ - rebuilds_per_group = 0; for (i = 0; i < rs->md.raid_disks * copies; i++) { + if (!(i % copies)) + rebuilds_per_group = 0; d = i % rs->md.raid_disks; - if (!test_bit(In_sync, &rs->dev[d].rdev.flags) && + if ((!rs->dev[d].rdev.sb_page || + !test_bit(In_sync, &rs->dev[d].rdev.flags)) && (++rebuilds_per_group >= copies)) goto too_many; - if (!((i + 1) % copies)) - rebuilds_per_group = 0; } break; default: - DMERR("The rebuild parameter is not supported for %s", - rs->raid_type->name); - rs->ti->error = "Rebuild not supported for this RAID type"; - return -EINVAL; + if (rebuild_cnt) + return -EINVAL; } return 0; too_many: - rs->ti->error = "Too many rebuild devices specified"; return -EINVAL; } @@ -664,9 +659,6 @@ static int parse_raid_params(struct raid_set *rs, char **argv, } rs->md.dev_sectors = sectors_per_dev; - if (validate_rebuild_devices(rs)) - return -EINVAL; - /* Assume there are no metadata devices until the drives are parsed */ rs->md.persistent = 0; rs->md.external = 1; @@ -995,28 +987,10 @@ static int super_validate(struct mddev *mddev, struct md_rdev *rdev) static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) { int ret; - unsigned redundancy = 0; struct raid_dev *dev; struct md_rdev *rdev, *tmp, *freshest; struct mddev *mddev = &rs->md; - switch (rs->raid_type->level) { - case 1: - redundancy = rs->md.raid_disks - 1; - break; - case 4: - case 5: - case 6: - redundancy = rs->raid_type->parity_devs; - break; - case 10: - redundancy = raid10_md_layout_to_copies(mddev->layout) - 1; - break; - default: - ti->error = "Unknown RAID type"; - return -EINVAL; - } - freshest = NULL; rdev_for_each_safe(rdev, tmp, mddev) { /* @@ -1045,44 +1019,43 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) break; default: dev = container_of(rdev, struct raid_dev, rdev); - if (redundancy--) { - if (dev->meta_dev) - dm_put_device(ti, dev->meta_dev); - - dev->meta_dev = NULL; - rdev->meta_bdev = NULL; + if (dev->meta_dev) + dm_put_device(ti, dev->meta_dev); - if (rdev->sb_page) - put_page(rdev->sb_page); + dev->meta_dev = NULL; + rdev->meta_bdev = NULL; - rdev->sb_page = NULL; + if (rdev->sb_page) + put_page(rdev->sb_page); - rdev->sb_loaded = 0; + rdev->sb_page = NULL; - /* - * We might be able to salvage the data device - * even though the meta device has failed. For - * now, we behave as though '- -' had been - * set for this device in the table. - */ - if (dev->data_dev) - dm_put_device(ti, dev->data_dev); + rdev->sb_loaded = 0; - dev->data_dev = NULL; - rdev->bdev = NULL; + /* + * We might be able to salvage the data device + * even though the meta device has failed. For + * now, we behave as though '- -' had been + * set for this device in the table. + */ + if (dev->data_dev) + dm_put_device(ti, dev->data_dev); - list_del(&rdev->same_set); + dev->data_dev = NULL; + rdev->bdev = NULL; - continue; - } - ti->error = "Failed to load superblock"; - return ret; + list_del(&rdev->same_set); } } if (!freshest) return 0; + if (validate_raid_redundancy(rs)) { + rs->ti->error = "Insufficient redundancy to activate array"; + return -EINVAL; + } + /* * Validation of the freshest device provides the source of * validation for the remaining devices. @@ -1432,7 +1405,7 @@ static void raid_resume(struct dm_target *ti) static struct target_type raid_target = { .name = "raid", - .version = {1, 4, 0}, + .version = {1, 4, 1}, .module = THIS_MODULE, .ctr = raid_ctr, .dtr = raid_dtr, -- cgit From 52666298aebe5e9ab28a773ee61d2ce81fa097bb Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 27 Nov 2012 16:48:50 +0000 Subject: mfd: vexpress-sysreg: Don't skip initialization on probe The vexpress-sysreg driver does not have to be initialized early, when the platform doesn't require this. Unfortunately in such case it wasn't initialized correctly - master site lookup and config bridge registration were missing. Fixed now. Signed-off-by: Pawel Moll --- drivers/mfd/vexpress-sysreg.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index e5d8f63b252a..77048b18439e 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -313,19 +313,11 @@ static void vexpress_sysreg_config_complete(unsigned long data) } -void __init vexpress_sysreg_early_init(void __iomem *base) +void __init vexpress_sysreg_setup(struct device_node *node) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); - - if (node) - base = of_iomap(node, 0); - - if (WARN_ON(!base)) + if (WARN_ON(!vexpress_sysreg_base)) return; - vexpress_sysreg_base = base; - if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) vexpress_master_site = VEXPRESS_SITE_DB2; else @@ -336,9 +328,23 @@ void __init vexpress_sysreg_early_init(void __iomem *base) WARN_ON(!vexpress_sysreg_config_bridge); } +void __init vexpress_sysreg_early_init(void __iomem *base) +{ + vexpress_sysreg_base = base; + vexpress_sysreg_setup(NULL); +} + void __init vexpress_sysreg_of_early_init(void) { - vexpress_sysreg_early_init(NULL); + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + if (node) { + vexpress_sysreg_base = of_iomap(node, 0); + vexpress_sysreg_setup(node); + } else { + pr_info("vexpress-sysreg: No Device Tree node found."); + } } @@ -426,9 +432,11 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return -EBUSY; } - if (!vexpress_sysreg_base) + if (!vexpress_sysreg_base) { vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + vexpress_sysreg_setup(pdev->dev.of_node); + } if (!vexpress_sysreg_base) { dev_err(&pdev->dev, "Failed to obtain base address!\n"); -- cgit From b3dfcb207e550dffb8680cab7afaf6b4fb6eae33 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Thu, 24 Jan 2013 19:02:01 +0100 Subject: drm/radeon: Enable DMA_IB_SWAP_ENABLE on big endian hosts. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes GPU hang during DMA ring IB test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672 Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/ni.c | 8 ++++++-- drivers/gpu/drm/radeon/r600.c | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 59acabb45c9b..835992d8d067 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1216,7 +1216,7 @@ void cayman_dma_stop(struct radeon_device *rdev) int cayman_dma_resume(struct radeon_device *rdev) { struct radeon_ring *ring; - u32 rb_cntl, dma_cntl; + u32 rb_cntl, dma_cntl, ib_cntl; u32 rb_bufsz; u32 reg_offset, wb_offset; int i, r; @@ -1265,7 +1265,11 @@ int cayman_dma_resume(struct radeon_device *rdev) WREG32(DMA_RB_BASE + reg_offset, ring->gpu_addr >> 8); /* enable DMA IBs */ - WREG32(DMA_IB_CNTL + reg_offset, DMA_IB_ENABLE | CMD_VMID_FORCE); + ib_cntl = DMA_IB_ENABLE | CMD_VMID_FORCE; +#ifdef __BIG_ENDIAN + ib_cntl |= DMA_IB_SWAP_ENABLE; +#endif + WREG32(DMA_IB_CNTL + reg_offset, ib_cntl); dma_cntl = RREG32(DMA_CNTL + reg_offset); dma_cntl &= ~CTXEMPTY_INT_ENABLE; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3cb9d6089373..bc2540b17c5e 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2313,7 +2313,7 @@ void r600_dma_stop(struct radeon_device *rdev) int r600_dma_resume(struct radeon_device *rdev) { struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_DMA_INDEX]; - u32 rb_cntl, dma_cntl; + u32 rb_cntl, dma_cntl, ib_cntl; u32 rb_bufsz; int r; @@ -2353,7 +2353,11 @@ int r600_dma_resume(struct radeon_device *rdev) WREG32(DMA_RB_BASE, ring->gpu_addr >> 8); /* enable DMA IBs */ - WREG32(DMA_IB_CNTL, DMA_IB_ENABLE); + ib_cntl = DMA_IB_ENABLE; +#ifdef __BIG_ENDIAN + ib_cntl |= DMA_IB_SWAP_ENABLE; +#endif + WREG32(DMA_IB_CNTL, ib_cntl); dma_cntl = RREG32(DMA_CNTL); dma_cntl &= ~CTXEMPTY_INT_ENABLE; -- cgit From 9c08e4ba81a73862e15b3eb4e6ae2e11aaf4151b Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Fri, 4 Jan 2013 07:59:11 -0500 Subject: drm/exynos: let drm handle edid allocations There's no need to allocate edid twice and do a memcpy when drm helpers exist to do just that. This patch cleans that interaction up, and doesn't keep the edid hanging around in the connector. v4: - removed error check for drm_mode_connector_update_edid_property which is expected to fail for Virtual Connectors like VIDI. Thanks to Seung-Woo Kim. v3: - removed MAX_EDID as it is not used anymore. v2: - changed vidi_get_edid callback inside vidi driver. Signed-off-by: Sean Paul Signed-off-by: Rahul Sharma Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_connector.c | 33 ++++++++++++--------------- drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 9 ++++---- drivers/gpu/drm/exynos/exynos_drm_hdmi.h | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 19 ++++++++++----- drivers/gpu/drm/exynos/exynos_hdmi.c | 25 ++++++++------------ 6 files changed, 46 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index ab37437bad8a..4c5b6859c9ea 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -18,7 +18,6 @@ #include "exynos_drm_drv.h" #include "exynos_drm_encoder.h" -#define MAX_EDID 256 #define to_exynos_connector(x) container_of(x, struct exynos_drm_connector,\ drm_connector) @@ -96,7 +95,9 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) to_exynos_connector(connector); struct exynos_drm_manager *manager = exynos_connector->manager; struct exynos_drm_display_ops *display_ops = manager->display_ops; - unsigned int count; + struct edid *edid = NULL; + unsigned int count = 0; + int ret; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -114,27 +115,21 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) * because lcd panel has only one mode. */ if (display_ops->get_edid) { - int ret; - void *edid; - - edid = kzalloc(MAX_EDID, GFP_KERNEL); - if (!edid) { - DRM_ERROR("failed to allocate edid\n"); - return 0; + edid = display_ops->get_edid(manager->dev, connector); + if (IS_ERR_OR_NULL(edid)) { + ret = PTR_ERR(edid); + edid = NULL; + DRM_ERROR("Panel operation get_edid failed %d\n", ret); + goto out; } - ret = display_ops->get_edid(manager->dev, connector, - edid, MAX_EDID); - if (ret < 0) { - DRM_ERROR("failed to get edid data.\n"); - kfree(edid); - edid = NULL; - return 0; + count = drm_add_edid_modes(connector, edid); + if (count < 0) { + DRM_ERROR("Add edid modes failed %d\n", count); + goto out; } drm_mode_connector_update_edid_property(connector, edid); - count = drm_add_edid_modes(connector, edid); - kfree(edid); } else { struct exynos_drm_panel_info *panel; struct drm_display_mode *mode = drm_mode_create(connector->dev); @@ -161,6 +156,8 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) count = 1; } +out: + kfree(edid); return count; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index b9e51bc09e81..4606fac7241a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -148,8 +148,8 @@ struct exynos_drm_overlay { struct exynos_drm_display_ops { enum exynos_drm_output_type type; bool (*is_connected)(struct device *dev); - int (*get_edid)(struct device *dev, struct drm_connector *connector, - u8 *edid, int len); + struct edid *(*get_edid)(struct device *dev, + struct drm_connector *connector); void *(*get_panel)(struct device *dev); int (*check_timing)(struct device *dev, void *timing); int (*power_on)(struct device *dev, int mode); diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 850e9950b7da..427d2dea9f07 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -108,18 +108,17 @@ static bool drm_hdmi_is_connected(struct device *dev) return false; } -static int drm_hdmi_get_edid(struct device *dev, - struct drm_connector *connector, u8 *edid, int len) +struct edid *drm_hdmi_get_edid(struct device *dev, + struct drm_connector *connector) { struct drm_hdmi_context *ctx = to_context(dev); DRM_DEBUG_KMS("%s\n", __FILE__); if (hdmi_ops && hdmi_ops->get_edid) - return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid, - len); + return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector); - return 0; + return NULL; } static int drm_hdmi_check_timing(struct device *dev, void *timing) diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h index 784a7e9a766c..d80516fc9ed7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h @@ -30,8 +30,8 @@ struct exynos_drm_hdmi_context { struct exynos_hdmi_ops { /* display */ bool (*is_connected)(void *ctx); - int (*get_edid)(void *ctx, struct drm_connector *connector, - u8 *edid, int len); + struct edid *(*get_edid)(void *ctx, + struct drm_connector *connector); int (*check_timing)(void *ctx, void *timing); int (*power_on)(void *ctx, int mode); diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index d0ca3c4e06c6..6d91000c56f9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -98,10 +98,12 @@ static bool vidi_display_is_connected(struct device *dev) return ctx->connected ? true : false; } -static int vidi_get_edid(struct device *dev, struct drm_connector *connector, - u8 *edid, int len) +static struct edid *vidi_get_edid(struct device *dev, + struct drm_connector *connector) { struct vidi_context *ctx = get_vidi_context(dev); + struct edid *edid; + int edid_len; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -111,13 +113,18 @@ static int vidi_get_edid(struct device *dev, struct drm_connector *connector, */ if (!ctx->raw_edid) { DRM_DEBUG_KMS("raw_edid is null.\n"); - return -EFAULT; + return ERR_PTR(-EFAULT); } - memcpy(edid, ctx->raw_edid, min((1 + ctx->raw_edid->extensions) - * EDID_LENGTH, len)); + edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH; + edid = kzalloc(edid_len, GFP_KERNEL); + if (!edid) { + DRM_DEBUG_KMS("failed to allocate edid\n"); + return ERR_PTR(-ENOMEM); + } - return 0; + memcpy(edid, ctx->raw_edid, edid_len); + return edid; } static void *vidi_get_panel(struct device *dev) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 41ff79d8ac8e..24dbb7f7c290 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1391,8 +1391,7 @@ static bool hdmi_is_connected(void *ctx) return hdata->hpd; } -static int hdmi_get_edid(void *ctx, struct drm_connector *connector, - u8 *edid, int len) +static struct edid *hdmi_get_edid(void *ctx, struct drm_connector *connector) { struct edid *raw_edid; struct hdmi_context *hdata = ctx; @@ -1400,22 +1399,18 @@ static int hdmi_get_edid(void *ctx, struct drm_connector *connector, DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); if (!hdata->ddc_port) - return -ENODEV; + return ERR_PTR(-ENODEV); raw_edid = drm_get_edid(connector, hdata->ddc_port->adapter); - if (raw_edid) { - hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid); - memcpy(edid, raw_edid, min((1 + raw_edid->extensions) - * EDID_LENGTH, len)); - DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n", - (hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"), - raw_edid->width_cm, raw_edid->height_cm); - kfree(raw_edid); - } else { - return -ENODEV; - } + if (!raw_edid) + return ERR_PTR(-ENODEV); - return 0; + hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid); + DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n", + (hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"), + raw_edid->width_cm, raw_edid->height_cm); + + return raw_edid; } static int hdmi_v13_check_timing(struct fb_videomode *check_timing) -- cgit From e7808df1af8801cf4f2ac16be25db1b079b5da4c Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Thu, 10 Jan 2013 19:35:06 +0900 Subject: drm/exynos: added validation of edid for vidi connection If edid of vidi from user is invalid, size calculated from a number of cea extensions can be wrong. So, validation should be checked. Changelog v2: - just code cleanup . declare raw_edid only if vidi->connection is enabled. Signed-off-by: Seung-Woo Kim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 6d91000c56f9..13ccbd4bcfaa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -521,7 +521,6 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data, struct exynos_drm_manager *manager; struct exynos_drm_display_ops *display_ops; struct drm_exynos_vidi_connection *vidi = data; - struct edid *raw_edid; int edid_len; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -558,11 +557,11 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data, } if (vidi->connection) { - if (!vidi->edid) { - DRM_DEBUG_KMS("edid data is null.\n"); + struct edid *raw_edid = (struct edid *)(uint32_t)vidi->edid; + if (!drm_edid_is_valid(raw_edid)) { + DRM_DEBUG_KMS("edid data is invalid.\n"); return -EINVAL; } - raw_edid = (struct edid *)(uint32_t)vidi->edid; edid_len = (1 + raw_edid->extensions) * EDID_LENGTH; ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL); if (!ctx->raw_edid) { -- cgit From 420ae1e2623af92e71437e403fd11de48e11551f Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 11 Jan 2013 13:38:28 +0900 Subject: drm/exynos: free sg object if dma_map_sg is failed This patch releases sgt's sg object allocated by sgt_alloc_table correctly. When exynos_gem_map_dma_buf was called by dma_buf_map_attachmemt(), the sgt's sg object was allocated by sg_alloc_tale() so if dma_map_sg() is failed, the sg object should be released. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 9df97714b6c0..693d4bca1518 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -110,6 +110,7 @@ static struct sg_table * nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir); if (!nents) { DRM_ERROR("failed to map sgl with iommu.\n"); + sg_free_table(sgt); sgt = ERR_PTR(-EIO); goto err_unlock; } -- cgit From b8b5c139ba75cde517b3e5eb6e3e760c0824b238 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 11 Jan 2013 13:46:58 +0900 Subject: drm/exynos: consider DMA_NONE flag to dmabuf import This patch considers DMA_NONE flag for other drivers not using dma mapping framework with iommu such as 3d gpu driver or others. For example, there might be 3d gpu driver that has its own iommu hw unit and iommu table mapping mechnism. So in this case, the dmabuf buffer imported into this driver needs just only sg table to map the buffer with its own iommu table itself. So this patch makes dma_buf_map_attachment ignore dma_map_sg call and just return sg table containing pages if dma_data_direction is DMA_NONE. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 693d4bca1518..ba0a3aa78547 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -19,6 +19,7 @@ struct exynos_drm_dmabuf_attachment { struct sg_table sgt; enum dma_data_direction dir; + bool is_mapped; }; static int exynos_gem_attach_dma_buf(struct dma_buf *dmabuf, @@ -72,17 +73,10 @@ static struct sg_table * DRM_DEBUG_PRIME("%s\n", __FILE__); - if (WARN_ON(dir == DMA_NONE)) - return ERR_PTR(-EINVAL); - /* just return current sgt if already requested. */ - if (exynos_attach->dir == dir) + if (exynos_attach->dir == dir && exynos_attach->is_mapped) return &exynos_attach->sgt; - /* reattaching is not allowed. */ - if (WARN_ON(exynos_attach->dir != DMA_NONE)) - return ERR_PTR(-EBUSY); - buf = gem_obj->buffer; if (!buf) { DRM_ERROR("buffer is null.\n"); @@ -107,14 +101,17 @@ static struct sg_table * wr = sg_next(wr); } - nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir); - if (!nents) { - DRM_ERROR("failed to map sgl with iommu.\n"); - sg_free_table(sgt); - sgt = ERR_PTR(-EIO); - goto err_unlock; + if (dir != DMA_NONE) { + nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir); + if (!nents) { + DRM_ERROR("failed to map sgl with iommu.\n"); + sg_free_table(sgt); + sgt = ERR_PTR(-EIO); + goto err_unlock; + } } + exynos_attach->is_mapped = true; exynos_attach->dir = dir; attach->priv = exynos_attach; -- cgit From b7848c7ad8ab77b1f71f0af4fe43b2bea0dab341 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 14 Jan 2013 12:29:09 +0530 Subject: drm/exynos: Make g2d_userptr_get_dma_addr static Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:327:12: warning: symbol 'g2d_userptr_get_dma_addr' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 36c3905536a6..9a4c08e7453c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -324,7 +324,7 @@ out: g2d_userptr = NULL; } -dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev, +static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev, unsigned long userptr, unsigned long size, struct drm_file *filp, -- cgit From 0bc4a0aa377ec5e6e3bd2b8ac963a008d8e1401b Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 14 Jan 2013 12:29:10 +0530 Subject: drm/exynos: Make ipp_handle_cmd_work static Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_ipp.c:872:6: warning: symbol 'ipp_handle_cmd_work' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 0bda96454a02..1a556354e92f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -869,7 +869,7 @@ static void ipp_put_event(struct drm_exynos_ipp_cmd_node *c_node, } } -void ipp_handle_cmd_work(struct device *dev, +static void ipp_handle_cmd_work(struct device *dev, struct exynos_drm_ippdrv *ippdrv, struct drm_exynos_ipp_cmd_work *cmd_work, struct drm_exynos_ipp_cmd_node *c_node) -- cgit From 09760ea34965a48d39e58607945e5e69edba01e6 Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Mon, 14 Jan 2013 17:03:20 -0500 Subject: drm/exynos: Replace mdelay with usleep_range Replace the unnecessary atomic mdelay calls with usleep_range calls. Signed-off-by: Sean Paul Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 14 +++++++------- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 24dbb7f7c290..b490afa781dc 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1647,9 +1647,9 @@ static void hdmi_conf_reset(struct hdmi_context *hdata) /* resetting HDMI core */ hdmi_reg_writemask(hdata, reg, 0, HDMI_CORE_SW_RSTOUT); - mdelay(10); + usleep_range(10000, 12000); hdmi_reg_writemask(hdata, reg, ~0, HDMI_CORE_SW_RSTOUT); - mdelay(10); + usleep_range(10000, 12000); } static void hdmi_conf_init(struct hdmi_context *hdata) @@ -1774,7 +1774,7 @@ static void hdmi_v13_timing_apply(struct hdmi_context *hdata) u32 val = hdmi_reg_read(hdata, HDMI_V13_PHY_STATUS); if (val & HDMI_PHY_STATUS_READY) break; - mdelay(1); + usleep_range(1000, 2000); } /* steady state not achieved */ if (tries == 0) { @@ -1941,7 +1941,7 @@ static void hdmi_v14_timing_apply(struct hdmi_context *hdata) u32 val = hdmi_reg_read(hdata, HDMI_PHY_STATUS_0); if (val & HDMI_PHY_STATUS_READY) break; - mdelay(1); + usleep_range(1000, 2000); } /* steady state not achieved */ if (tries == 0) { @@ -1993,9 +1993,9 @@ static void hdmiphy_conf_reset(struct hdmi_context *hdata) /* reset hdmiphy */ hdmi_reg_writemask(hdata, reg, ~0, HDMI_PHY_SW_RSTOUT); - mdelay(10); + usleep_range(10000, 12000); hdmi_reg_writemask(hdata, reg, 0, HDMI_PHY_SW_RSTOUT); - mdelay(10); + usleep_range(10000, 12000); } static void hdmiphy_poweron(struct hdmi_context *hdata) @@ -2043,7 +2043,7 @@ static void hdmiphy_conf_apply(struct hdmi_context *hdata) return; } - mdelay(10); + usleep_range(10000, 12000); /* operation mode */ operation[0] = 0x1f; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index c187ea33b748..1ff2d7a045b5 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -600,7 +600,7 @@ static void vp_win_reset(struct mixer_context *ctx) /* waiting until VP_SRESET_PROCESSING is 0 */ if (~vp_reg_read(res, VP_SRESET) & VP_SRESET_PROCESSING) break; - mdelay(10); + usleep_range(10000, 12000); } WARN(tries == 0, "failed to reset Video Processor\n"); } -- cgit From 0315a902c0ca7f54f992fc8062158092ed57b062 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 14 Jan 2013 12:29:11 +0530 Subject: drm/exynos: Add missing static specifiers in exynos_drm_rotator.c Fixes the following warnings: drivers/gpu/drm/exynos/exynos_drm_rotator.c:737:24: warning: symbol 'rot_limit_tbl' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_rotator.c:754:27: warning: symbol 'rotator_driver_ids' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index e9e83ef688f0..f976e29def6e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -734,7 +734,7 @@ static int rotator_remove(struct platform_device *pdev) return 0; } -struct rot_limit_table rot_limit_tbl = { +static struct rot_limit_table rot_limit_tbl = { .ycbcr420_2p = { .min_w = 32, .min_h = 32, @@ -751,7 +751,7 @@ struct rot_limit_table rot_limit_tbl = { }, }; -struct platform_device_id rotator_driver_ids[] = { +static struct platform_device_id rotator_driver_ids[] = { { .name = "exynos-rot", .driver_data = (unsigned long)&rot_limit_tbl, -- cgit From 77006a7ac8d0122a64512958e0a1e34d9e9f39a3 Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Wed, 16 Jan 2013 10:17:20 -0500 Subject: drm/exynos: Remove "internal" interrupt handling Remove the "internal" interrupt handling since it's never invoked and remove "external" reference. This patch removes a bunch of dead code and clarifies how hotplugging is handled in the HDMI driver. Signed-off-by: Sean Paul Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 74 +++++++----------------------------- 1 file changed, 14 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index b490afa781dc..41ba9dc7f5c7 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -98,8 +98,7 @@ struct hdmi_context { void __iomem *regs; void *parent_ctx; - int external_irq; - int internal_irq; + int irq; struct i2c_client *ddc_port; struct i2c_client *hdmiphy_port; @@ -1656,7 +1655,7 @@ static void hdmi_conf_init(struct hdmi_context *hdata) { struct hdmi_infoframe infoframe; - /* disable HPD interrupts */ + /* disable HPD interrupts from HDMI IP block, use GPIO instead */ hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL | HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG); @@ -2260,7 +2259,7 @@ static struct exynos_hdmi_ops hdmi_ops = { .dpms = hdmi_dpms, }; -static irqreturn_t hdmi_external_irq_thread(int irq, void *arg) +static irqreturn_t hdmi_irq_thread(int irq, void *arg) { struct exynos_drm_hdmi_context *ctx = arg; struct hdmi_context *hdata = ctx->ctx; @@ -2275,31 +2274,6 @@ static irqreturn_t hdmi_external_irq_thread(int irq, void *arg) return IRQ_HANDLED; } -static irqreturn_t hdmi_internal_irq_thread(int irq, void *arg) -{ - struct exynos_drm_hdmi_context *ctx = arg; - struct hdmi_context *hdata = ctx->ctx; - u32 intc_flag; - - intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG); - /* clearing flags for HPD plug/unplug */ - if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) { - DRM_DEBUG_KMS("unplugged\n"); - hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0, - HDMI_INTC_FLAG_HPD_UNPLUG); - } - if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) { - DRM_DEBUG_KMS("plugged\n"); - hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0, - HDMI_INTC_FLAG_HPD_PLUG); - } - - if (ctx->drm_dev) - drm_helper_hpd_irq_event(ctx->drm_dev); - - return IRQ_HANDLED; -} - static int hdmi_resources_init(struct hdmi_context *hdata) { struct device *dev = hdata->dev; @@ -2550,39 +2524,24 @@ static int hdmi_probe(struct platform_device *pdev) hdata->hdmiphy_port = hdmi_hdmiphy; - hdata->external_irq = gpio_to_irq(hdata->hpd_gpio); - if (hdata->external_irq < 0) { - DRM_ERROR("failed to get GPIO external irq\n"); - ret = hdata->external_irq; - goto err_hdmiphy; - } - - hdata->internal_irq = platform_get_irq(pdev, 0); - if (hdata->internal_irq < 0) { - DRM_ERROR("failed to get platform internal irq\n"); - ret = hdata->internal_irq; + hdata->irq = gpio_to_irq(hdata->hpd_gpio); + if (hdata->irq < 0) { + DRM_ERROR("failed to get GPIO irq\n"); + ret = hdata->irq; goto err_hdmiphy; } hdata->hpd = gpio_get_value(hdata->hpd_gpio); - ret = request_threaded_irq(hdata->external_irq, NULL, - hdmi_external_irq_thread, IRQF_TRIGGER_RISING | + ret = request_threaded_irq(hdata->irq, NULL, + hdmi_irq_thread, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "hdmi_external", drm_hdmi_ctx); + "hdmi", drm_hdmi_ctx); if (ret) { - DRM_ERROR("failed to register hdmi external interrupt\n"); + DRM_ERROR("failed to register hdmi interrupt\n"); goto err_hdmiphy; } - ret = request_threaded_irq(hdata->internal_irq, NULL, - hdmi_internal_irq_thread, IRQF_ONESHOT, - "hdmi_internal", drm_hdmi_ctx); - if (ret) { - DRM_ERROR("failed to register hdmi internal interrupt\n"); - goto err_free_irq; - } - /* Attach HDMI Driver to common hdmi. */ exynos_hdmi_drv_attach(drm_hdmi_ctx); @@ -2593,8 +2552,6 @@ static int hdmi_probe(struct platform_device *pdev) return 0; -err_free_irq: - free_irq(hdata->external_irq, drm_hdmi_ctx); err_hdmiphy: i2c_del_driver(&hdmiphy_driver); err_ddc: @@ -2612,8 +2569,7 @@ static int hdmi_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(hdata->internal_irq, hdata); - free_irq(hdata->external_irq, hdata); + free_irq(hdata->irq, hdata); /* hdmiphy i2c driver */ @@ -2632,8 +2588,7 @@ static int hdmi_suspend(struct device *dev) DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); - disable_irq(hdata->internal_irq); - disable_irq(hdata->external_irq); + disable_irq(hdata->irq); hdata->hpd = false; if (ctx->drm_dev) @@ -2658,8 +2613,7 @@ static int hdmi_resume(struct device *dev) hdata->hpd = gpio_get_value(hdata->hpd_gpio); - enable_irq(hdata->external_irq); - enable_irq(hdata->internal_irq); + enable_irq(hdata->irq); if (!pm_runtime_suspended(dev)) { DRM_DEBUG_KMS("%s : Already resumed\n", __func__); -- cgit From 05523d563d3c019b3f33a0daa1e73aa075aa0161 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 21 Jan 2013 17:16:00 +0000 Subject: drm/exynos: don't include plat/gpio-cfg.h Patch 9eb3e9e6f3 "drm/exynos: add support for ARCH_MULTIPLATFORM" allowed building the exynos hdmi driver on non-samsung platforms, which unfortunately broke compilation in combination with 22c4f42897 "drm: exynos: hdmi: add support for exynos5 hdmi", which added an inclusion of the samsung-specific plat/gpio-cfg.h header file. Fortunately, that header file is not required any more here, so we can simply revert the inclusion in order to build the ARM allyesconfig again without getting this error: drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory Signed-off-by: Arnd Bergmann Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_hdmi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 41ba9dc7f5c7..32c04a696a59 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -34,7 +34,6 @@ #include #include #include -#include #include -- cgit From 7cdc046d9e9d5e90da20dc13eac90061688544a2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 21 Jan 2013 17:16:01 +0000 Subject: drm/exynos: fimd and ipp are broken on multiplatform While the exynos DRM support in principle can work on multiplatform, the FIMD and IPP sections of it both include the plat/map-base.h header file, which is not available on multiplatform. Rather than disabling the entire driver, we can just conditionally build these two parts. Without this patch, building allyesconfig results in: drivers/gpu/drm/exynos/exynos_drm_fimc.c:19:27: fatal error: plat/map-base.h: No such file or directory drivers/gpu/drm/exynos/exynos_drm_ipp.c:20:27: fatal error: plat/map-base.h: No such file or directory Signed-off-by: Arnd Bergmann Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 1d1f1e5e33f0..046bcda36abe 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -24,7 +24,7 @@ config DRM_EXYNOS_DMABUF config DRM_EXYNOS_FIMD bool "Exynos DRM FIMD" - depends on DRM_EXYNOS && !FB_S3C + depends on DRM_EXYNOS && !FB_S3C && !ARCH_MULTIPLATFORM help Choose this option if you want to use Exynos FIMD for DRM. @@ -48,7 +48,7 @@ config DRM_EXYNOS_G2D config DRM_EXYNOS_IPP bool "Exynos DRM IPP" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !ARCH_MULTIPLATFORM help Choose this option if you want to use IPP feature for DRM. -- cgit From 428982e70ad1a6dbd583d6fb4f896595dac382e1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 21 Jan 2013 15:26:57 +0530 Subject: drm/exynos: Make 'drm_hdmi_get_edid' static Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_hdmi.c:111:13: warning: symbol 'drm_hdmi_get_edid' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 427d2dea9f07..28644539b305 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -108,7 +108,7 @@ static bool drm_hdmi_is_connected(struct device *dev) return false; } -struct edid *drm_hdmi_get_edid(struct device *dev, +static struct edid *drm_hdmi_get_edid(struct device *dev, struct drm_connector *connector) { struct drm_hdmi_context *ctx = to_context(dev); -- cgit From dda9012b2ad98f0ed124ea1f44b82f8b2288f697 Mon Sep 17 00:00:00 2001 From: Shirish S Date: Wed, 23 Jan 2013 22:03:18 -0500 Subject: drm/exynos: add check for the device power status V2: Add mutex protection, while read. The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: Shirish S Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +++++++ drivers/gpu/drm/exynos/exynos_mixer.c | 7 +++++++ 2 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 32c04a696a59..fbab3c468603 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2163,6 +2163,13 @@ static void hdmi_commit(void *ctx) DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); + mutex_lock(&hdata->hdmi_mutex); + if (!hdata->powered) { + mutex_unlock(&hdata->hdmi_mutex); + return; + } + mutex_unlock(&hdata->hdmi_mutex); + hdmi_conf_apply(hdata); } diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1ff2d7a045b5..c414584bfbae 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -776,6 +776,13 @@ static void mixer_win_commit(void *ctx, int win) DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win); + mutex_lock(&mixer_ctx->mixer_mutex); + if (!mixer_ctx->powered) { + mutex_unlock(&mixer_ctx->mixer_mutex); + return; + } + mutex_unlock(&mixer_ctx->mixer_mutex); + if (win > 1 && mixer_ctx->vp_enabled) vp_video_buffer(mixer_ctx, win); else -- cgit From 7f46d0f81f2387807fa3e757d5d521cda8c23866 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 24 Jan 2013 10:29:26 -0500 Subject: regulators: db8500: Fix compile failure for drivers/regulator/dbx500-prcmu.c Building for the snowball board, I ran into this compile failure: CC drivers/regulator/dbx500-prcmu.o arm-test.git/drivers/regulator/dbx500-prcmu.c:119:11: error: 'THIS_MODULE' undeclared here (not in a function) make[3]: *** [drivers/regulator/dbx500-prcmu.o] Error 1 make[2]: *** [drivers/regulator] Error 2 Commit 38e968380 "regulators/db8500: split off shared dbx500 code" separated out the dbx500 code but did not copy over the required include to linux/module.h. Signed-off-by: Steven Rostedt Signed-off-by: Mark Brown --- drivers/regulator/dbx500-prcmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 261f3d2299bc..89bd2faaef8c 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "dbx500-prcmu.h" -- cgit From d4cbca9ef822e05d4b55e7d0f1cdfded7a472a56 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Jan 2013 21:29:41 +0800 Subject: regulator: tps80031: Use IS_ERR to check return value of regulator_register() regulator_register() does not return NULL, it returns ERR_PTR on error. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/tps80031-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/tps80031-regulator.c b/drivers/regulator/tps80031-regulator.c index b15d711bc8c6..9019d0e7ecb6 100644 --- a/drivers/regulator/tps80031-regulator.c +++ b/drivers/regulator/tps80031-regulator.c @@ -728,7 +728,7 @@ static int tps80031_regulator_probe(struct platform_device *pdev) } } rdev = regulator_register(&ri->rinfo->desc, &config); - if (IS_ERR_OR_NULL(rdev)) { + if (IS_ERR(rdev)) { dev_err(&pdev->dev, "register regulator failed %s\n", ri->rinfo->desc.name); -- cgit From 6ea45886865c1abb01bb861f7f6bdd5d0f398cb3 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:39 +0100 Subject: can: c_can: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Cc: Bhupesh Sharma Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 5233b8f58d77..58607f196c9e 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -960,7 +960,7 @@ static int c_can_handle_bus_err(struct net_device *dev, break; case LEC_ACK_ERROR: netdev_dbg(dev, "ack error\n"); - cf->data[2] |= (CAN_ERR_PROT_LOC_ACK | + cf->data[3] |= (CAN_ERR_PROT_LOC_ACK | CAN_ERR_PROT_LOC_ACK_DEL); break; case LEC_BIT1_ERROR: @@ -973,7 +973,7 @@ static int c_can_handle_bus_err(struct net_device *dev, break; case LEC_CRC_ERROR: netdev_dbg(dev, "CRC error\n"); - cf->data[2] |= (CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL); break; default: -- cgit From 71088c4bd9b8f8cbffb0e66f2abc14297e4b2ca8 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:40 +0100 Subject: can: ti_hecc: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Cc: Anant Gole Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ti_hecc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index f898c6363729..300581b24ff3 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -746,12 +746,12 @@ static int ti_hecc_error(struct net_device *ndev, int int_status, } if (err_status & HECC_CANES_CRCE) { hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE); - cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL; } if (err_status & HECC_CANES_ACKE) { hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE); - cf->data[2] |= CAN_ERR_PROT_LOC_ACK | + cf->data[3] |= CAN_ERR_PROT_LOC_ACK | CAN_ERR_PROT_LOC_ACK_DEL; } } -- cgit From ee50e135aeb048b90fab662e661c58b67341830b Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:32:41 +0100 Subject: can: pch_can: fix invalid error codes Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/pch_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 7d1748575b1f..5c314a961970 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -560,7 +560,7 @@ static void pch_can_error(struct net_device *ndev, u32 status) stats->rx_errors++; break; case PCH_CRC_ERR: - cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ | + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | CAN_ERR_PROT_LOC_CRC_DEL; priv->can.can_stats.bus_error++; stats->rx_errors++; -- cgit From d817ac4e181710cd02b582b759d3123ad2cfa8d8 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Wed, 23 Jan 2013 09:51:04 +0800 Subject: mfd: rtsx: Add output voltage switch hook Different card reader has different method to switch output voltage, add this callback to let the card reader implement its individual switch function. This is needed as rtl8411 has a specific switch output voltage procedure. Signed-off-by: Wei WANG Signed-off-by: Samuel Ortiz --- drivers/mfd/rtl8411.c | 16 ++++++++++++++++ drivers/mfd/rts5209.c | 20 ++++++++++++++++++++ drivers/mfd/rts5229.c | 20 ++++++++++++++++++++ drivers/mfd/rtsx_pcr.c | 9 +++++++++ include/linux/mfd/rtsx_pci.h | 24 ++++++++++++++++++++---- 5 files changed, 85 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 89f046ca9e41..5058ba8dec3b 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card) BPP_LDO_POWB, BPP_LDO_SUSPEND); } +static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + u8 mask, val; + + mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK; + if (voltage == OUTPUT_3V3) + val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; + else if (voltage == OUTPUT_1V8) + val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; + else + return -EINVAL; + + return rtsx_pci_write_register(pcr, LDO_CTL, mask, val); +} + static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) { unsigned int card_exist; @@ -172,6 +187,7 @@ static const struct pcr_ops rtl8411_pcr_ops = { .disable_auto_blink = rtl8411_disable_auto_blink, .card_power_on = rtl8411_card_power_on, .card_power_off = rtl8411_card_power_off, + .switch_output_voltage = rtl8411_switch_output_voltage, .cd_deglitch = rtl8411_cd_deglitch, }; diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c index 283a4f148084..ba74de8a7c24 100644 --- a/drivers/mfd/rts5209.c +++ b/drivers/mfd/rts5209.c @@ -144,6 +144,25 @@ static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card) return rtsx_pci_send_cmd(pcr, 100); } +static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + int err; + + if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); + if (err < 0) + return err; + } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); + if (err < 0) + return err; + } else { + return -EINVAL; + } + + return 0; +} + static const struct pcr_ops rts5209_pcr_ops = { .extra_init_hw = rts5209_extra_init_hw, .optimize_phy = rts5209_optimize_phy, @@ -153,6 +172,7 @@ static const struct pcr_ops rts5209_pcr_ops = { .disable_auto_blink = rts5209_disable_auto_blink, .card_power_on = rts5209_card_power_on, .card_power_off = rts5209_card_power_off, + .switch_output_voltage = rts5209_switch_output_voltage, .cd_deglitch = NULL, }; diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c index b9dbab266fda..ec1747adf5d3 100644 --- a/drivers/mfd/rts5229.c +++ b/drivers/mfd/rts5229.c @@ -114,6 +114,25 @@ static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card) return rtsx_pci_send_cmd(pcr, 100); } +static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + int err; + + if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); + if (err < 0) + return err; + } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); + if (err < 0) + return err; + } else { + return -EINVAL; + } + + return 0; +} + static const struct pcr_ops rts5229_pcr_ops = { .extra_init_hw = rts5229_extra_init_hw, .optimize_phy = rts5229_optimize_phy, @@ -123,6 +142,7 @@ static const struct pcr_ops rts5229_pcr_ops = { .disable_auto_blink = rts5229_disable_auto_blink, .card_power_on = rts5229_card_power_on, .card_power_off = rts5229_card_power_off, + .switch_output_voltage = rts5229_switch_output_voltage, .cd_deglitch = NULL, }; diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index 7a7b0bda4618..f4e02d089271 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -703,6 +703,15 @@ int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card) } EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off); +int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + if (pcr->ops->switch_output_voltage) + return pcr->ops->switch_output_voltage(pcr, voltage); + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_pci_switch_output_voltage); + unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr) { unsigned int val; diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 060b721fcbfb..271b6e5654af 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -158,10 +158,9 @@ #define SG_TRANS_DATA (0x02 << 4) #define SG_LINK_DESC (0x03 << 4) -/* SD bank voltage */ -#define SD_IO_3V3 0 -#define SD_IO_1V8 1 - +/* Output voltage */ +#define OUTPUT_3V3 0 +#define OUTPUT_1V8 1 /* Card Clock Enable Register */ #define SD_CLK_EN 0x04 @@ -201,6 +200,20 @@ #define CHANGE_CLK 0x01 /* LDO_CTL */ +#define BPP_ASIC_1V7 0x00 +#define BPP_ASIC_1V8 0x01 +#define BPP_ASIC_1V9 0x02 +#define BPP_ASIC_2V0 0x03 +#define BPP_ASIC_2V7 0x04 +#define BPP_ASIC_2V8 0x05 +#define BPP_ASIC_3V2 0x06 +#define BPP_ASIC_3V3 0x07 +#define BPP_REG_TUNED18 0x07 +#define BPP_TUNED18_SHIFT_8402 5 +#define BPP_TUNED18_SHIFT_8411 4 +#define BPP_PAD_MASK 0x04 +#define BPP_PAD_3V3 0x04 +#define BPP_PAD_1V8 0x00 #define BPP_LDO_POWB 0x03 #define BPP_LDO_ON 0x00 #define BPP_LDO_SUSPEND 0x02 @@ -688,6 +701,8 @@ struct pcr_ops { int (*disable_auto_blink)(struct rtsx_pcr *pcr); int (*card_power_on)(struct rtsx_pcr *pcr, int card); int (*card_power_off)(struct rtsx_pcr *pcr, int card); + int (*switch_output_voltage)(struct rtsx_pcr *pcr, + u8 voltage); unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); }; @@ -783,6 +798,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage); unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); -- cgit From ef85e736b1052d8c1e56990f0d08b6fce7cdbe41 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Wed, 23 Jan 2013 09:51:05 +0800 Subject: mmc: rtsx: Call MFD hook to switch output voltage Different card reader has different method to switch output voltage, so we have to use the callback function provided by MFD driver to switch output pad voltage. Signed-off-by: Wei WANG Signed-off-by: Samuel Ortiz --- drivers/mmc/host/rtsx_pci_sdmmc.c | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c index 571915dfb218..f74b5adca642 100644 --- a/drivers/mmc/host/rtsx_pci_sdmmc.c +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -1060,26 +1060,6 @@ static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host) return 0; } -static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage) -{ - struct rtsx_pcr *pcr = host->pcr; - int err; - - if (voltage == SD_IO_3V3) { - err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); - if (err < 0) - return err; - } else if (voltage == SD_IO_1V8) { - err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); - if (err < 0) - return err; - } else { - return -EINVAL; - } - - return 0; -} - static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) { struct realtek_pci_sdmmc *host = mmc_priv(mmc); @@ -1098,11 +1078,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) rtsx_pci_start_run(pcr); if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) - voltage = SD_IO_3V3; + voltage = OUTPUT_3V3; else - voltage = SD_IO_1V8; + voltage = OUTPUT_1V8; - if (voltage == SD_IO_1V8) { + if (voltage == OUTPUT_1V8) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B); if (err < 0) @@ -1113,11 +1093,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) goto out; } - err = sd_change_bank_voltage(host, voltage); + err = rtsx_pci_switch_output_voltage(pcr, voltage); if (err < 0) goto out; - if (voltage == SD_IO_1V8) { + if (voltage == OUTPUT_1V8) { err = sd_wait_voltage_stable_2(host); if (err < 0) goto out; -- cgit From ab4e8f8b7bdfeff0c961fdbbdacb262d68f094c0 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Wed, 23 Jan 2013 09:51:06 +0800 Subject: mfd: rtsx: Add clock divider hook Add callback function conv_clk_and_div_n to convert between SSC clock and its divider N. For rtl8411, the formula to calculate SSC clock divider N is different with the other card reader models. Signed-off-by: Wei WANG Signed-off-by: Samuel Ortiz --- drivers/mfd/rtl8411.c | 13 +++++++++++++ drivers/mfd/rts5209.c | 1 + drivers/mfd/rts5229.c | 1 + drivers/mfd/rtsx_pcr.c | 14 ++++++++++++-- include/linux/mfd/rtsx_common.h | 3 +++ include/linux/mfd/rtsx_pci.h | 1 + 6 files changed, 31 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 5058ba8dec3b..3d3b4addf81a 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -178,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) return card_exist; } +static int rtl8411_conv_clk_and_div_n(int input, int dir) +{ + int output; + + if (dir == CLK_TO_DIV_N) + output = input * 4 / 5 - 2; + else + output = (input + 2) * 5 / 4; + + return output; +} + static const struct pcr_ops rtl8411_pcr_ops = { .extra_init_hw = rtl8411_extra_init_hw, .optimize_phy = NULL, @@ -189,6 +201,7 @@ static const struct pcr_ops rtl8411_pcr_ops = { .card_power_off = rtl8411_card_power_off, .switch_output_voltage = rtl8411_switch_output_voltage, .cd_deglitch = rtl8411_cd_deglitch, + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n, }; /* SD Pull Control Enable: diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c index ba74de8a7c24..98fe0f39463e 100644 --- a/drivers/mfd/rts5209.c +++ b/drivers/mfd/rts5209.c @@ -174,6 +174,7 @@ static const struct pcr_ops rts5209_pcr_ops = { .card_power_off = rts5209_card_power_off, .switch_output_voltage = rts5209_switch_output_voltage, .cd_deglitch = NULL, + .conv_clk_and_div_n = NULL, }; /* SD Pull Control Enable: diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c index ec1747adf5d3..29d889cbb9c5 100644 --- a/drivers/mfd/rts5229.c +++ b/drivers/mfd/rts5229.c @@ -144,6 +144,7 @@ static const struct pcr_ops rts5229_pcr_ops = { .card_power_off = rts5229_card_power_off, .switch_output_voltage = rts5229_switch_output_voltage, .cd_deglitch = NULL, + .conv_clk_and_div_n = NULL, }; /* SD Pull Control Enable: diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index f4e02d089271..910200e10fa0 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -630,7 +630,10 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, if (clk == pcr->cur_clock) return 0; - N = (u8)(clk - 2); + if (pcr->ops->conv_clk_and_div_n) + N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N); + else + N = (u8)(clk - 2); if ((clk <= 2) || (N > max_N)) return -EINVAL; @@ -641,7 +644,14 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, /* Make sure that the SSC clock div_n is equal or greater than min_N */ div = CLK_DIV_1; while ((N < min_N) && (div < max_div)) { - N = (N + 2) * 2 - 2; + if (pcr->ops->conv_clk_and_div_n) { + int dbl_clk = pcr->ops->conv_clk_and_div_n(N, + DIV_N_TO_CLK) * 2; + N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk, + CLK_TO_DIV_N); + } else { + N = (N + 2) * 2 - 2; + } div++; } dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div); diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h index a8d393e3066b..2b13970596f5 100644 --- a/include/linux/mfd/rtsx_common.h +++ b/include/linux/mfd/rtsx_common.h @@ -38,6 +38,9 @@ #define RTSX_SD_CARD 0 #define RTSX_MS_CARD 1 +#define CLK_TO_DIV_N 0 +#define DIV_N_TO_CLK 1 + struct platform_device; struct rtsx_slot { diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 271b6e5654af..4b117a3f54d4 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -704,6 +704,7 @@ struct pcr_ops { int (*switch_output_voltage)(struct rtsx_pcr *pcr, u8 voltage); unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); + int (*conv_clk_and_div_n)(int clk, int dir); }; enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; -- cgit From 0a8c290ac58a86d5e1f2193abcd4d74ec075e20c Mon Sep 17 00:00:00 2001 From: Ashish Jangam Date: Fri, 25 Jan 2013 14:03:49 +0530 Subject: mfd: da9052/53 lockup fix An issue has been reported where the PMIC either locks up or fails to respond following a system Reset. This could result in a second write in which the bus writes the current content of the write buffer to address of the last I2C access. The failure case is where this unwanted write transfers incorrect data to a critical register. This patch fixes this issue to by following any read or write with a dummy read to a safe register address. A safe register address is one where the contents will not affect the operation of the system. Signed-off-by: Ashish Jangam Signed-off-by: Samuel Ortiz --- drivers/mfd/da9052-i2c.c | 61 ++++++++++++++++++++++++++++++++++++ include/linux/mfd/da9052/da9052.h | 66 ++++++++++++++++++++++++++++++++++++--- include/linux/mfd/da9052/reg.h | 3 ++ 3 files changed, 126 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index ac74a4d1daea..885e56780358 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -27,6 +27,66 @@ #include #endif +/* I2C safe register check */ +static inline bool i2c_safe_reg(unsigned char reg) +{ + switch (reg) { + case DA9052_STATUS_A_REG: + case DA9052_STATUS_B_REG: + case DA9052_STATUS_C_REG: + case DA9052_STATUS_D_REG: + case DA9052_ADC_RES_L_REG: + case DA9052_ADC_RES_H_REG: + case DA9052_VDD_RES_REG: + case DA9052_ICHG_AV_REG: + case DA9052_TBAT_RES_REG: + case DA9052_ADCIN4_RES_REG: + case DA9052_ADCIN5_RES_REG: + case DA9052_ADCIN6_RES_REG: + case DA9052_TJUNC_RES_REG: + case DA9052_TSI_X_MSB_REG: + case DA9052_TSI_Y_MSB_REG: + case DA9052_TSI_LSB_REG: + case DA9052_TSI_Z_MSB_REG: + return true; + default: + return false; + } +} + +/* + * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC + * gets lockup up or fails to respond following a system reset. + * This fix is to follow any read or write with a dummy read to a safe + * register. + */ +int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) +{ + int val; + + switch (da9052->chip_id) { + case DA9052: + case DA9053_AA: + case DA9053_BA: + case DA9053_BB: + /* A dummy read to a safe register address. */ + if (!i2c_safe_reg(reg)) + return regmap_read(da9052->regmap, + DA9052_PARK_REGISTER, + &val); + break; + default: + /* + * For other chips parking of I2C register + * to a safe place is not required. + */ + break; + } + + return 0; +} +EXPORT_SYMBOL(da9052_i2c_fix); + static int da9052_i2c_enable_multiwrite(struct da9052 *da9052) { int reg_val, ret; @@ -83,6 +143,7 @@ static int da9052_i2c_probe(struct i2c_client *client, da9052->dev = &client->dev; da9052->chip_irq = client->irq; + da9052->fix_io = da9052_i2c_fix; i2c_set_clientdata(client, da9052); diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 86dd93de6ff2..786d02eb79d2 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -99,6 +99,9 @@ struct da9052 { u8 chip_id; int chip_irq; + + /* SOC I/O transfer related fixes for DA9052/53 */ + int (*fix_io) (struct da9052 *da9052, unsigned char reg); }; /* ADC API */ @@ -113,32 +116,87 @@ static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg) ret = regmap_read(da9052->regmap, reg, &val); if (ret < 0) return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + return val; } static inline int da9052_reg_write(struct da9052 *da9052, unsigned char reg, unsigned char val) { - return regmap_write(da9052->regmap, reg, val); + int ret; + + ret = regmap_write(da9052->regmap, reg, val); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg, unsigned reg_cnt, unsigned char *val) { - return regmap_bulk_read(da9052->regmap, reg, val, reg_cnt); + int ret; + + ret = regmap_bulk_read(da9052->regmap, reg, val, reg_cnt); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg, unsigned reg_cnt, unsigned char *val) { - return regmap_raw_write(da9052->regmap, reg, val, reg_cnt); + int ret; + + ret = regmap_raw_write(da9052->regmap, reg, val, reg_cnt); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg, unsigned char bit_mask, unsigned char reg_val) { - return regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val); + int ret; + + ret = regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } int da9052_device_init(struct da9052 *da9052, u8 chip_id); diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h index b97f7309d7f6..c4dd3a8add21 100644 --- a/include/linux/mfd/da9052/reg.h +++ b/include/linux/mfd/da9052/reg.h @@ -34,6 +34,9 @@ #define DA9052_STATUS_C_REG 3 #define DA9052_STATUS_D_REG 4 +/* PARK REGISTER */ +#define DA9052_PARK_REGISTER DA9052_STATUS_D_REG + /* EVENT REGISTERS */ #define DA9052_EVENT_A_REG 5 #define DA9052_EVENT_B_REG 6 -- cgit From f65e9eacfad60cd05d1bac7defb6ff6b50dcfb5b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 Jan 2013 14:14:26 +0000 Subject: mfd: twl4030: Don't warn about uninitialized return code If the twl4030_write_script function gets called with a zero length argument, its return value does not get set. We know that all scripts have a nonzero length, but returning an error in case they ever do is probably appropriate. Without this patch, building omap2plus_defconfig results in: drivers/mfd/twl4030-power.c: In function 'load_twl4030_script': drivers/mfd/twl4030-power.c:414:5: error: 'err' may be used uninitialized in this function Signed-off-by: Arnd Bergmann Reviewed-by: Peter Ujfalusi Reviewed-by: Amit Kucheria Cc: Kevin Hilman Cc: "Kristo, Tero" Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 4dae241e5017..dd362c1078e1 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -159,7 +159,7 @@ out: static int twl4030_write_script(u8 address, struct twl4030_ins *script, int len) { - int err; + int err = -EINVAL; for (; len; len--, address++, script++) { if (len == 1) { -- cgit From ff0decd49343c7c5bd0dbeadace344d69b9f205f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 25 Jan 2013 23:53:51 +0800 Subject: mfd: wm5102: Fix definition of WM5102_MAX_REGISTER Updated in latest datasheet. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm5102-tables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 088872ab6338..1133a64c2dc9 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -1882,7 +1882,7 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) } } -#define WM5102_MAX_REGISTER 0x1a8fff +#define WM5102_MAX_REGISTER 0x1a9800 const struct regmap_config wm5102_spi_regmap = { .reg_bits = 32, -- cgit From 2d1484f5990c094e2c706672a8d286576dd096b4 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Sun, 27 Jan 2013 01:55:16 +0100 Subject: mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probed If rtsx_pci_sdmmc is not probed, function pointer pcr->slots[].card_event will point to NULL, and thus rtsx_pci_card_detect will reference a NULL pointer. Check card_event pointer before referencing it can avoid kernel panic. Signed-off-by: Wei WANG Signed-off-by: Samuel Ortiz --- drivers/mfd/rtsx_pcr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index 910200e10fa0..9fc57009e228 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -786,10 +786,10 @@ static void rtsx_pci_card_detect(struct work_struct *work) spin_unlock_irqrestore(&pcr->lock, flags); - if (card_detect & SD_EXIST) + if ((card_detect & SD_EXIST) && pcr->slots[RTSX_SD_CARD].card_event) pcr->slots[RTSX_SD_CARD].card_event( pcr->slots[RTSX_SD_CARD].p_dev); - if (card_detect & MS_EXIST) + if ((card_detect & MS_EXIST) && pcr->slots[RTSX_MS_CARD].card_event) pcr->slots[RTSX_MS_CARD].card_event( pcr->slots[RTSX_MS_CARD].p_dev); } -- cgit From 47be24796c13e7d9f087005c2bedc68ee0709f7b Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:29 +0000 Subject: virtio-net: fix the set affinity bug when CPU IDs are not consecutive As Michael mentioned, set affinity and select queue will not work very well when CPU IDs are not consecutive, this can happen with hot unplug. Fix this bug by traversal the online CPUs, and create a per cpu variable to find the mapping from CPU to the preferable virtual-queue. Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 67 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 54 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a6fcf15adc4f..fda214a5426a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -123,6 +123,9 @@ struct virtnet_info { /* Does the affinity hint is set for virtqueues? */ bool affinity_hint_set; + + /* Per-cpu variable to show the mapping from CPU to virtqueue */ + int __percpu *vq_index; }; struct skb_vnet_hdr { @@ -1016,6 +1019,7 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) static void virtnet_set_affinity(struct virtnet_info *vi, bool set) { int i; + int cpu; /* In multiqueue mode, when the number of cpu is equal to the number of * queue pairs, we let the queue pairs to be private to one cpu by @@ -1023,22 +1027,40 @@ static void virtnet_set_affinity(struct virtnet_info *vi, bool set) */ if ((vi->curr_queue_pairs == 1 || vi->max_queue_pairs != num_online_cpus()) && set) { - if (vi->affinity_hint_set) + if (vi->affinity_hint_set) { set = false; - else + } else { + i = 0; + for_each_online_cpu(cpu) + *per_cpu_ptr(vi->vq_index, cpu) = + ++i % vi->curr_queue_pairs; return; + } } - for (i = 0; i < vi->max_queue_pairs; i++) { - int cpu = set ? i : -1; - virtqueue_set_affinity(vi->rq[i].vq, cpu); - virtqueue_set_affinity(vi->sq[i].vq, cpu); - } + if (set) { + i = 0; + for_each_online_cpu(cpu) { + virtqueue_set_affinity(vi->rq[i].vq, cpu); + virtqueue_set_affinity(vi->sq[i].vq, cpu); + *per_cpu_ptr(vi->vq_index, cpu) = i; + i++; + } - if (set) vi->affinity_hint_set = true; - else + } else { + for(i = 0; i < vi->max_queue_pairs; i++) { + virtqueue_set_affinity(vi->rq[i].vq, -1); + virtqueue_set_affinity(vi->sq[i].vq, -1); + } + + i = 0; + for_each_online_cpu(cpu) + *per_cpu_ptr(vi->vq_index, cpu) = + ++i % vi->curr_queue_pairs; + vi->affinity_hint_set = false; + } } static void virtnet_get_ringparam(struct net_device *dev, @@ -1082,6 +1104,7 @@ static int virtnet_set_channels(struct net_device *dev, if (queue_pairs > vi->max_queue_pairs) return -EINVAL; + get_online_cpus(); err = virtnet_set_queues(vi, queue_pairs); if (!err) { netif_set_real_num_tx_queues(dev, queue_pairs); @@ -1089,6 +1112,7 @@ static int virtnet_set_channels(struct net_device *dev, virtnet_set_affinity(vi, true); } + put_online_cpus(); return err; } @@ -1127,12 +1151,19 @@ static int virtnet_change_mtu(struct net_device *dev, int new_mtu) /* To avoid contending a lock hold by a vcpu who would exit to host, select the * txq based on the processor id. - * TODO: handle cpu hotplug. */ static u16 virtnet_select_queue(struct net_device *dev, struct sk_buff *skb) { - int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : - smp_processor_id(); + int txq; + struct virtnet_info *vi = netdev_priv(dev); + + if (skb_rx_queue_recorded(skb)) { + txq = skb_get_rx_queue(skb); + } else { + txq = *__this_cpu_ptr(vi->vq_index); + if (txq == -1) + txq = 0; + } while (unlikely(txq >= dev->real_num_tx_queues)) txq -= dev->real_num_tx_queues; @@ -1371,7 +1402,10 @@ static int init_vqs(struct virtnet_info *vi) if (ret) goto err_free; + get_online_cpus(); virtnet_set_affinity(vi, true); + put_online_cpus(); + return 0; err_free: @@ -1453,6 +1487,10 @@ static int virtnet_probe(struct virtio_device *vdev) if (vi->stats == NULL) goto free; + vi->vq_index = alloc_percpu(int); + if (vi->vq_index == NULL) + goto free_stats; + mutex_init(&vi->config_lock); vi->config_enable = true; INIT_WORK(&vi->config_work, virtnet_config_changed_work); @@ -1476,7 +1514,7 @@ static int virtnet_probe(struct virtio_device *vdev) /* Allocate/initialize the rx/tx queues, and invoke find_vqs */ err = init_vqs(vi); if (err) - goto free_stats; + goto free_index; netif_set_real_num_tx_queues(dev, 1); netif_set_real_num_rx_queues(dev, 1); @@ -1520,6 +1558,8 @@ free_recv_bufs: free_vqs: cancel_delayed_work_sync(&vi->refill); virtnet_del_vqs(vi); +free_index: + free_percpu(vi->vq_index); free_stats: free_percpu(vi->stats); free: @@ -1554,6 +1594,7 @@ static void virtnet_remove(struct virtio_device *vdev) flush_work(&vi->config_work); + free_percpu(vi->vq_index); free_percpu(vi->stats); free_netdev(vi->dev); } -- cgit From 8898c21cf37d04041863e7ecf53707dff504bda0 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:30 +0000 Subject: virtio-net: split out clean affinity function Split out the clean affinity function to virtnet_clean_affinity(). Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 76 +++++++++++++++++++++++++----------------------- 1 file changed, 40 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fda214a5426a..2f6fe9b6b17b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1016,51 +1016,55 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) return 0; } -static void virtnet_set_affinity(struct virtnet_info *vi, bool set) +static void virtnet_clean_affinity(struct virtnet_info *vi, long hcpu) { int i; int cpu; - /* In multiqueue mode, when the number of cpu is equal to the number of - * queue pairs, we let the queue pairs to be private to one cpu by - * setting the affinity hint to eliminate the contention. - */ - if ((vi->curr_queue_pairs == 1 || - vi->max_queue_pairs != num_online_cpus()) && set) { - if (vi->affinity_hint_set) { - set = false; - } else { - i = 0; - for_each_online_cpu(cpu) - *per_cpu_ptr(vi->vq_index, cpu) = - ++i % vi->curr_queue_pairs; - return; - } - } - - if (set) { - i = 0; - for_each_online_cpu(cpu) { - virtqueue_set_affinity(vi->rq[i].vq, cpu); - virtqueue_set_affinity(vi->sq[i].vq, cpu); - *per_cpu_ptr(vi->vq_index, cpu) = i; - i++; - } - - vi->affinity_hint_set = true; - } else { - for(i = 0; i < vi->max_queue_pairs; i++) { + if (vi->affinity_hint_set) { + for (i = 0; i < vi->max_queue_pairs; i++) { virtqueue_set_affinity(vi->rq[i].vq, -1); virtqueue_set_affinity(vi->sq[i].vq, -1); } - i = 0; - for_each_online_cpu(cpu) + vi->affinity_hint_set = false; + } + + i = 0; + for_each_online_cpu(cpu) { + if (cpu == hcpu) { + *per_cpu_ptr(vi->vq_index, cpu) = -1; + } else { *per_cpu_ptr(vi->vq_index, cpu) = ++i % vi->curr_queue_pairs; + } + } +} - vi->affinity_hint_set = false; +static void virtnet_set_affinity(struct virtnet_info *vi) +{ + int i; + int cpu; + + /* In multiqueue mode, when the number of cpu is equal to the number of + * queue pairs, we let the queue pairs to be private to one cpu by + * setting the affinity hint to eliminate the contention. + */ + if (vi->curr_queue_pairs == 1 || + vi->max_queue_pairs != num_online_cpus()) { + virtnet_clean_affinity(vi, -1); + return; } + + i = 0; + for_each_online_cpu(cpu) { + virtqueue_set_affinity(vi->rq[i].vq, cpu); + virtqueue_set_affinity(vi->sq[i].vq, cpu); + *per_cpu_ptr(vi->vq_index, cpu) = i; + i++; + } + + vi->affinity_hint_set = true; } static void virtnet_get_ringparam(struct net_device *dev, @@ -1110,7 +1114,7 @@ static int virtnet_set_channels(struct net_device *dev, netif_set_real_num_tx_queues(dev, queue_pairs); netif_set_real_num_rx_queues(dev, queue_pairs); - virtnet_set_affinity(vi, true); + virtnet_set_affinity(vi); } put_online_cpus(); @@ -1279,7 +1283,7 @@ static void virtnet_del_vqs(struct virtnet_info *vi) { struct virtio_device *vdev = vi->vdev; - virtnet_set_affinity(vi, false); + virtnet_clean_affinity(vi, -1); vdev->config->del_vqs(vdev); @@ -1403,7 +1407,7 @@ static int init_vqs(struct virtnet_info *vi) goto err_free; get_online_cpus(); - virtnet_set_affinity(vi, true); + virtnet_set_affinity(vi); put_online_cpus(); return 0; -- cgit From 8de4b2f3ae90c8fc0f17eeaab87d5a951b66ee17 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Thu, 24 Jan 2013 23:51:31 +0000 Subject: virtio-net: reset virtqueue affinity when doing cpu hotplug Add a cpu notifier to virtio-net, so that we can reset the virtqueue affinity if the cpu hotplug happens. It improve the performance through enabling or disabling the virtqueue affinity after doing cpu hotplug. Cc: Rusty Russell Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Eric Dumazet Cc: "David S. Miller" Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Wanlong Gao Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 2f6fe9b6b17b..35c00c5ea02a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -26,6 +26,7 @@ #include #include #include +#include static int napi_weight = 128; module_param(napi_weight, int, 0444); @@ -126,6 +127,9 @@ struct virtnet_info { /* Per-cpu variable to show the mapping from CPU to virtqueue */ int __percpu *vq_index; + + /* CPU hot plug notifier */ + struct notifier_block nb; }; struct skb_vnet_hdr { @@ -1067,6 +1071,26 @@ static void virtnet_set_affinity(struct virtnet_info *vi) vi->affinity_hint_set = true; } +static int virtnet_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb); + + switch(action & ~CPU_TASKS_FROZEN) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + case CPU_DEAD: + virtnet_set_affinity(vi); + break; + case CPU_DOWN_PREPARE: + virtnet_clean_affinity(vi, (long)hcpu); + break; + default: + break; + } + return NOTIFY_OK; +} + static void virtnet_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) { @@ -1541,6 +1565,13 @@ static int virtnet_probe(struct virtio_device *vdev) } } + vi->nb.notifier_call = &virtnet_cpu_callback; + err = register_hotcpu_notifier(&vi->nb); + if (err) { + pr_debug("virtio_net: registering cpu notifier failed\n"); + goto free_recv_bufs; + } + /* Assume link up if device can't report link status, otherwise get link status from config. */ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) { @@ -1587,6 +1618,8 @@ static void virtnet_remove(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; + unregister_hotcpu_notifier(&vi->nb); + /* Prevent config work handler from accessing the device. */ mutex_lock(&vi->config_lock); vi->config_enable = false; -- cgit From 794ed393b707f01858f5ebe2ae5eabaf89d00022 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 25 Jan 2013 07:44:41 +0000 Subject: net: loopback: fix a dst refcounting issue Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [] loopback_xmit+0x64/0x83 [] dev_hard_start_xmit+0x26c/0x35e [] dev_queue_xmit+0x2c4/0x37c [] ? dev_hard_start_xmit+0x35e/0x35e [] ? eth_header+0x28/0xb6 [] neigh_resolve_output+0x176/0x1a7 [] ip_finish_output2+0x297/0x30d [] ? ip_finish_output2+0x137/0x30d [] ip_finish_output+0x63/0x68 [] ip_output+0x61/0x67 [] dst_output+0x17/0x1b [] ip_local_out+0x1e/0x23 [] ip_queue_xmit+0x315/0x353 [] ? ip_send_unicast_reply+0x2cc/0x2cc [] tcp_transmit_skb+0x7ca/0x80b [] tcp_connect+0x53c/0x587 [] ? getnstimeofday+0x44/0x7d [] ? ktime_get_real+0x11/0x3e [] tcp_v4_connect+0x3c2/0x431 [] __inet_stream_connect+0x84/0x287 [] ? inet_stream_connect+0x22/0x49 [] ? _local_bh_enable_ip+0x84/0x9f [] ? local_bh_enable+0xd/0x11 [] ? lock_sock_nested+0x6e/0x79 [] ? inet_stream_connect+0x22/0x49 [] inet_stream_connect+0x33/0x49 [] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226ad2397b (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by: Ben Greear Signed-off-by: Eric Dumazet Tested-by: Ben Greear Signed-off-by: David S. Miller --- drivers/net/loopback.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 81f8f9e31db5..fcbf680c3e62 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -77,6 +77,11 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb, skb_orphan(skb); + /* Before queueing this packet to netif_rx(), + * make sure dst is refcounted. + */ + skb_dst_force(skb); + skb->protocol = eth_type_trans(skb, dev); /* it's OK to use per_cpu_ptr() because BHs are off */ -- cgit From 56a666dcfcb46e998a1bd969fb201bf51de3c412 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Fri, 25 Jan 2013 23:36:59 +0000 Subject: net: cdc_ncm: use IAD provided by the USB core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 9992c2e (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez Cc: Alexey Orishko Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f94711caa08a..9197b2c72ca3 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -344,23 +344,6 @@ static const struct ethtool_ops cdc_ncm_ethtool_ops = { .nway_reset = usbnet_nway_reset, }; -/* return first slave interface if an IAD matches the given master */ -static struct usb_interface *get_iad_slave(struct usb_device *udev, - struct usb_interface *master) { - int i; - struct usb_interface_assoc_descriptor *iad; - u8 mnum = master->cur_altsetting->desc.bInterfaceNumber; - - for (i = 0; i < USB_MAXIADS; i++) { - iad = udev->actconfig->intf_assoc[i]; - if (!iad) - break; - if (iad->bFirstInterface == mnum && iad->bInterfaceCount == 2) - return usb_ifnum_to_if(udev, mnum + 1); - } - return NULL; -} - int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting) { struct cdc_ncm_ctx *ctx; @@ -453,13 +436,10 @@ advance: } /* some buggy devices have an IAD but no CDC Union */ - if (!ctx->union_desc) { - dev_dbg(&intf->dev, "missing CDC Union descriptor\n"); - ctx->data = get_iad_slave(dev->udev, intf); - if (ctx->data) { - ctx->control = intf; - dev_dbg(&intf->dev, "got slave from IAD\n"); - } + if (!ctx->union_desc && intf->intf_assoc && intf->intf_assoc->bInterfaceCount == 2) { + ctx->control = intf; + ctx->data = usb_ifnum_to_if(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber + 1); + dev_dbg(&intf->dev, "CDC Union missing - got slave from IAD\n"); } /* check if we got everything */ -- cgit From ce11ff5e5963e441feb591e76278528f876c332d Mon Sep 17 00:00:00 2001 From: françois romieu Date: Thu, 24 Jan 2013 13:30:06 +0000 Subject: r8169: fix vlan tag read ordering. Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu Spotted-by: Timo Teras Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c28bc318cec6..11702324a071 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1826,8 +1826,6 @@ static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb) if (opts2 & RxVlanTag) __vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff)); - - desc->opts2 = 0; } static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) @@ -6064,8 +6062,6 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget !(status & (RxRWT | RxFOVF)) && (dev->features & NETIF_F_RXALL)) goto process_pkt; - - rtl8169_mark_to_asic(desc, rx_buf_sz); } else { struct sk_buff *skb; dma_addr_t addr; @@ -6086,16 +6082,14 @@ process_pkt: if (unlikely(rtl8169_fragmented_frame(status))) { dev->stats.rx_dropped++; dev->stats.rx_length_errors++; - rtl8169_mark_to_asic(desc, rx_buf_sz); - continue; + goto release_descriptor; } skb = rtl8169_try_rx_copy(tp->Rx_databuff[entry], tp, pkt_size, addr); - rtl8169_mark_to_asic(desc, rx_buf_sz); if (!skb) { dev->stats.rx_dropped++; - continue; + goto release_descriptor; } rtl8169_rx_csum(skb, status); @@ -6111,6 +6105,10 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } +release_descriptor: + desc->opts2 = 0; + wmb(); + rtl8169_mark_to_asic(desc, rx_buf_sz); } count = cur_rx - tp->cur_rx; -- cgit From b4a496319f2fe4b46d7a9ab246f4fbf23a5a3106 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Wed, 23 Jan 2013 00:22:36 +0000 Subject: net: phy: icplus: Use the RGMII interface mode to configure clock delays Like several other PHY devices which support RGMII, the IC+1001 allows additional delays to by added to the RX_CLK and TX_CLK signals to compensate for skew between the clock and data signals. Previously this was always enabled, but this change makes use of the different RGMII interface modes to allow the user to specify whether this should be enabled. Signed-off-by: Stuart Menefy Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index d5199cb4caec..c0e092470182 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -36,8 +36,9 @@ MODULE_LICENSE("GPL"); /* IP101A/G - IP1001 */ #define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_RXPHASE_SEL (1<<0) /* Add delay on RX_CLK */ +#define IP1001_TXPHASE_SEL (1<<1) /* Add delay on TX_CLK */ #define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ @@ -143,14 +144,24 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; - if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { - /* Additional delay (2ns) used to adjust RX clock phase - * at RGMII interface */ + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); if (c < 0) return c; - c |= IP1001_PHASE_SEL_MASK; + c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + c |= IP1001_RXPHASE_SEL; + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + c |= IP1001_TXPHASE_SEL; + c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); if (c < 0) return c; -- cgit From 014f2ffdf6e22581f172ba443be0ad924a913f46 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 23 Jan 2013 00:22:37 +0000 Subject: net: phy: icplus: fix broken INTR pin settings This patch fixes the setting of the INTR pin that is valid for IP101 A/G device and not for the IP1001. Reported-by: Anunay Saxena Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c0e092470182..b5ddd5077a80 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -139,11 +139,6 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; - /* INTR pin used: speed/link/duplex will cause an interrupt */ - c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); - if (c < 0) - return c; - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || @@ -178,6 +173,11 @@ static int ip101a_g_config_init(struct phy_device *phydev) if (c < 0) return c; + /* INTR pin used: speed/link/duplex will cause an interrupt */ + c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); + if (c < 0) + return c; + /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c |= IP101A_G_APS_ON; -- cgit From 6642f91c92da07369cf1e582503ea3ccb4a7f1a9 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sun, 27 Jan 2013 12:34:22 +0000 Subject: dm9601: support dm9620 variant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski for providing me with a dm9620 based device to test. Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 011410f39c90..d7e99445518e 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -45,6 +45,12 @@ #define DM_MCAST_ADDR 0x16 /* 8 bytes */ #define DM_GPR_CTRL 0x1e #define DM_GPR_DATA 0x1f +#define DM_CHIP_ID 0x2c +#define DM_MODE_CTRL 0x91 /* only on dm9620 */ + +/* chip id values */ +#define ID_DM9601 0 +#define ID_DM9620 1 #define DM_MAX_MCAST 64 #define DM_MCAST_SIZE 8 @@ -348,7 +354,7 @@ static const struct net_device_ops dm9601_netdev_ops = { static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; - u8 mac[ETH_ALEN]; + u8 mac[ETH_ALEN], id; ret = usbnet_get_endpoints(dev, intf); if (ret) @@ -389,6 +395,24 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) __dm9601_set_mac_address(dev); } + if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) { + netdev_err(dev->net, "Error reading chip ID\n"); + ret = -ENODEV; + goto out; + } + + /* put dm9620 devices in dm9601 mode */ + if (id == ID_DM9620) { + u8 mode; + + if (dm_read_reg(dev, DM_MODE_CTRL, &mode) < 0) { + netdev_err(dev->net, "Error reading MODE_CTRL\n"); + ret = -ENODEV; + goto out; + } + dm_write_reg(dev, DM_MODE_CTRL, mode & 0x7f); + } + /* power up phy */ dm_write_reg(dev, DM_GPR_CTRL, 1); dm_write_reg(dev, DM_GPR_DATA, 0); @@ -571,6 +595,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9620), /* DM9620 USB to Fast Ethernet Adapter */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; -- cgit From 318fe782539c4150d1b8e4e6c9dc3a896512cb8a Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Thu, 24 Jan 2013 13:17:53 -0600 Subject: IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround The IOMMU may stop processing page translations due to a perceived lack of credits for writing upstream peripheral page service request (PPR) or event logs. If the L2B miscellaneous clock gating feature is enabled the IOMMU does not properly register credits after the log request has completed, leading to a potential system hang. BIOSes are supposed to disable L2B micellaneous clock gating by setting L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This patch corrects that for those which do not enable this workaround. Signed-off-by: Suravee Suthikulpanit Acked-by: Borislav Petkov Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 81837b0710a9..faf10ba1ed9a 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -974,6 +974,38 @@ static void __init free_iommu_all(void) } } +/* + * Family15h Model 10h-1fh erratum 746 (IOMMU Logging May Stall Translations) + * Workaround: + * BIOS should disable L2B micellaneous clock gating by setting + * L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b + */ +static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu) +{ + u32 value; + + if ((boot_cpu_data.x86 != 0x15) || + (boot_cpu_data.x86_model < 0x10) || + (boot_cpu_data.x86_model > 0x1f)) + return; + + pci_write_config_dword(iommu->dev, 0xf0, 0x90); + pci_read_config_dword(iommu->dev, 0xf4, &value); + + if (value & BIT(2)) + return; + + /* Select NB indirect register 0x90 and enable writing */ + pci_write_config_dword(iommu->dev, 0xf0, 0x90 | (1 << 8)); + + pci_write_config_dword(iommu->dev, 0xf4, value | 0x4); + pr_info("AMD-Vi: Applying erratum 746 workaround for IOMMU at %s\n", + dev_name(&iommu->dev->dev)); + + /* Clear the enable writing bit */ + pci_write_config_dword(iommu->dev, 0xf0, 0x90); +} + /* * This function clues the initialization function for one IOMMU * together and also allocates the command buffer and programs the @@ -1172,6 +1204,8 @@ static int iommu_init_pci(struct amd_iommu *iommu) iommu->stored_l2[i] = iommu_read_l2(iommu, i); } + amd_iommu_erratum_746_workaround(iommu); + return pci_enable_device(iommu->dev); } -- cgit From 312b00e510af60175b2935404a1927e6480e91e7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 Jan 2013 14:14:29 +0000 Subject: pinctrl: exynos: don't mark probing functions as __init Functions called from a driver probe() method must not be marked __init, because they may get called after the init phase is done, when the device shows up late, or because of deferred probing. Without this patch, building exynos_defconfig results in multiple warnings like: WARNING: drivers/pinctrl/built-in.o(.text+0x51bc): Section mismatch in reference from the function exynos5440_pinctrl_probe() to the function .init.text:exynos5440_gpiolib_register() The function exynos5440_pinctrl_probe() references the function __init exynos5440_gpiolib_register(). This is often because exynos5440_pinctrl_probe lacks a __init annotation or the annotation of exynos5440_gpiolib_register is wrong. Signed-off-by: Arnd Bergmann Cc: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos5440.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index de05b64f0da6..142729914c34 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -599,7 +599,7 @@ static int exynos5440_gpio_direction_output(struct gpio_chip *gc, unsigned offse } /* parse the pin numbers listed in the 'samsung,exynos5440-pins' property */ -static int __init exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev, +static int exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev, struct device_node *cfg_np, unsigned int **pin_list, unsigned int *npins) { @@ -630,7 +630,7 @@ static int __init exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev, * Parse the information about all the available pin groups and pin functions * from device node of the pin-controller. */ -static int __init exynos5440_pinctrl_parse_dt(struct platform_device *pdev, +static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev, struct exynos5440_pinctrl_priv_data *priv) { struct device *dev = &pdev->dev; @@ -723,7 +723,7 @@ static int __init exynos5440_pinctrl_parse_dt(struct platform_device *pdev, } /* register the pinctrl interface with the pinctrl subsystem */ -static int __init exynos5440_pinctrl_register(struct platform_device *pdev, +static int exynos5440_pinctrl_register(struct platform_device *pdev, struct exynos5440_pinctrl_priv_data *priv) { struct device *dev = &pdev->dev; @@ -798,7 +798,7 @@ static int __init exynos5440_pinctrl_register(struct platform_device *pdev, } /* register the gpiolib interface with the gpiolib subsystem */ -static int __init exynos5440_gpiolib_register(struct platform_device *pdev, +static int exynos5440_gpiolib_register(struct platform_device *pdev, struct exynos5440_pinctrl_priv_data *priv) { struct gpio_chip *gc; @@ -831,7 +831,7 @@ static int __init exynos5440_gpiolib_register(struct platform_device *pdev, } /* unregister the gpiolib interface with the gpiolib subsystem */ -static int __init exynos5440_gpiolib_unregister(struct platform_device *pdev, +static int exynos5440_gpiolib_unregister(struct platform_device *pdev, struct exynos5440_pinctrl_priv_data *priv) { int ret = gpiochip_remove(priv->gc); -- cgit From 0fafd50e4b41c06bf6be8dead87075e88ef25303 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 25 Jan 2013 14:14:30 +0000 Subject: pinctrl: nomadik: nmk_prcm_gpiocr_get_mode may be unused nmk_prcm_gpiocr_get_mode is only needed for debugfs output at the moment, which can be compile-time disabled. Marking the function __maybe_unused still gives us compile-time coverage, but avoids a gcc warning. Without this patch, building nhk8815_defconfig results in: drivers/pinctrl/pinctrl-nomadik.c:676:12: warning: 'nmk_prcm_gpiocr_get_mode' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Cc: Jean-Nicolas Graux Cc: Srinidhi Kasagar Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 1bb16ffb4e41..5767b18ebdff 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -676,7 +676,7 @@ int nmk_gpio_set_mode(int gpio, int gpio_mode) } EXPORT_SYMBOL(nmk_gpio_set_mode); -static int nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio) +static int __maybe_unused nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio) { int i; u16 reg; -- cgit From 8024c4c0b1057d1cd811fc9c3f88f81de9729fcd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 26 Jan 2013 10:49:24 +0300 Subject: EDAC: Test correct variable in ->store function We're testing for ->show but calling ->store(). Signed-off-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov --- drivers/edac/edac_pci_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index dc6e905ee1a5..0056c4dae9d5 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -256,7 +256,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj, struct edac_pci_dev_attribute *edac_pci_dev; edac_pci_dev = (struct edac_pci_dev_attribute *)attr; - if (edac_pci_dev->show) + if (edac_pci_dev->store) return edac_pci_dev->store(edac_pci_dev->value, buffer, count); return -EIO; } -- cgit From d3d09e18203dba16a9dbdb2b4cc673d90748cdd1 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2013 11:24:00 -0800 Subject: EDAC: Fix kcalloc argument order First number, then size. Signed-off-by: Joe Perches Cc: Signed-off-by: Borislav Petkov --- drivers/edac/edac_mc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 281f566a5513..d1e9eb191f2b 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -340,7 +340,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, /* * Alocate and fill the csrow/channels structs */ - mci->csrows = kcalloc(sizeof(*mci->csrows), tot_csrows, GFP_KERNEL); + mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL); if (!mci->csrows) goto error; for (row = 0; row < tot_csrows; row++) { @@ -351,7 +351,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, csr->csrow_idx = row; csr->mci = mci; csr->nr_channels = tot_channels; - csr->channels = kcalloc(sizeof(*csr->channels), tot_channels, + csr->channels = kcalloc(tot_channels, sizeof(*csr->channels), GFP_KERNEL); if (!csr->channels) goto error; @@ -369,7 +369,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, /* * Allocate and fill the dimm structs */ - mci->dimms = kcalloc(sizeof(*mci->dimms), tot_dimms, GFP_KERNEL); + mci->dimms = kcalloc(tot_dimms, sizeof(*mci->dimms), GFP_KERNEL); if (!mci->dimms) goto error; -- cgit From 83e68189745ad931c2afd45d8ee3303929233e7f Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 14 Nov 2012 09:42:35 +0000 Subject: efi: Make 'efi_enabled' a function to query EFI facilities Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie Cc: Corentin Chary Cc: Matthew Garrett Cc: Dave Jiang Cc: Olof Johansson Cc: Peter Jones Cc: Colin Ian King Cc: Steve Langasek Cc: Tony Luck Cc: Konrad Rzeszutek Wilk Cc: Rafael J. Wysocki Cc: Signed-off-by: Matt Fleming Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/efi.h | 1 + arch/x86/kernel/reboot.c | 2 +- arch/x86/kernel/setup.c | 28 ++++++++--------- arch/x86/platform/efi/efi.c | 57 ++++++++++++++++++++-------------- drivers/acpi/osl.c | 2 +- drivers/firmware/dmi_scan.c | 2 +- drivers/firmware/efivars.c | 4 +-- drivers/firmware/iscsi_ibft_find.c | 2 +- drivers/gpu/drm/radeon/radeon_device.c | 3 +- drivers/platform/x86/ibm_rtl.c | 2 +- drivers/scsi/isci/init.c | 2 +- include/linux/efi.h | 24 ++++++++++---- init/main.c | 4 +-- 13 files changed, 79 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 6e8fdf5ad113..28677c55113f 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; +extern unsigned long x86_efi_facility; extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern int efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 4e8ba39eaf0f..76fa1e9a2b39 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -584,7 +584,7 @@ static void native_machine_emergency_restart(void) break; case BOOT_EFI: - if (efi_enabled) + if (efi_enabled(EFI_RUNTIME_SERVICES)) efi.reset_system(reboot_mode ? EFI_RESET_WARM : EFI_RESET_COLD, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 00f6c1472b85..8b24289cc10c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -807,15 +807,15 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_EFI if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, "EL32", 4)) { - efi_enabled = 1; - efi_64bit = false; + set_bit(EFI_BOOT, &x86_efi_facility); } else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature, "EL64", 4)) { - efi_enabled = 1; - efi_64bit = true; + set_bit(EFI_BOOT, &x86_efi_facility); + set_bit(EFI_64BIT, &x86_efi_facility); } - if (efi_enabled && efi_memblock_x86_reserve_range()) - efi_enabled = 0; + + if (efi_enabled(EFI_BOOT)) + efi_memblock_x86_reserve_range(); #endif x86_init.oem.arch_setup(); @@ -888,7 +888,7 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); - if (efi_enabled) + if (efi_enabled(EFI_BOOT)) efi_init(); dmi_scan_machine(); @@ -971,7 +971,7 @@ void __init setup_arch(char **cmdline_p) * The EFI specification says that boot service code won't be called * after ExitBootServices(). This is, in fact, a lie. */ - if (efi_enabled) + if (efi_enabled(EFI_MEMMAP)) efi_reserve_boot_services(); /* preallocate 4k for mptable mpc */ @@ -1114,7 +1114,7 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) - if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) + if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) conswitchp = &vga_con; #elif defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; @@ -1131,14 +1131,14 @@ void __init setup_arch(char **cmdline_p) register_refined_jiffies(CLOCK_TICK_RATE); #ifdef CONFIG_EFI - /* Once setup is done above, disable efi_enabled on mismatched - * firmware/kernel archtectures since there is no support for - * runtime services. + /* Once setup is done above, unmap the EFI memory map on + * mismatched firmware/kernel archtectures since there is no + * support for runtime services. */ - if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) { + if (efi_enabled(EFI_BOOT) && + IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) { pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n"); efi_unmap_memmap(); - efi_enabled = 0; } #endif } diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index ad4439145f85..5426e482db6e 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -51,9 +51,6 @@ #define EFI_DEBUG 1 -int efi_enabled; -EXPORT_SYMBOL(efi_enabled); - struct efi __read_mostly efi = { .mps = EFI_INVALID_TABLE_ADDR, .acpi = EFI_INVALID_TABLE_ADDR, @@ -69,19 +66,28 @@ EXPORT_SYMBOL(efi); struct efi_memory_map memmap; -bool efi_64bit; - static struct efi efi_phys __initdata; static efi_system_table_t efi_systab __initdata; static inline bool efi_is_native(void) { - return IS_ENABLED(CONFIG_X86_64) == efi_64bit; + return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT); +} + +unsigned long x86_efi_facility; + +/* + * Returns 1 if 'facility' is enabled, 0 otherwise. + */ +int efi_enabled(int facility) +{ + return test_bit(facility, &x86_efi_facility) != 0; } +EXPORT_SYMBOL(efi_enabled); static int __init setup_noefi(char *arg) { - efi_enabled = 0; + clear_bit(EFI_BOOT, &x86_efi_facility); return 0; } early_param("noefi", setup_noefi); @@ -426,6 +432,7 @@ void __init efi_reserve_boot_services(void) void __init efi_unmap_memmap(void) { + clear_bit(EFI_MEMMAP, &x86_efi_facility); if (memmap.map) { early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size); memmap.map = NULL; @@ -460,7 +467,7 @@ void __init efi_free_boot_services(void) static int __init efi_systab_init(void *phys) { - if (efi_64bit) { + if (efi_enabled(EFI_64BIT)) { efi_system_table_64_t *systab64; u64 tmp = 0; @@ -552,7 +559,7 @@ static int __init efi_config_init(u64 tables, int nr_tables) void *config_tables, *tablep; int i, sz; - if (efi_64bit) + if (efi_enabled(EFI_64BIT)) sz = sizeof(efi_config_table_64_t); else sz = sizeof(efi_config_table_32_t); @@ -572,7 +579,7 @@ static int __init efi_config_init(u64 tables, int nr_tables) efi_guid_t guid; unsigned long table; - if (efi_64bit) { + if (efi_enabled(EFI_64BIT)) { u64 table64; guid = ((efi_config_table_64_t *)tablep)->guid; table64 = ((efi_config_table_64_t *)tablep)->table; @@ -684,7 +691,6 @@ void __init efi_init(void) if (boot_params.efi_info.efi_systab_hi || boot_params.efi_info.efi_memmap_hi) { pr_info("Table located above 4GB, disabling EFI.\n"); - efi_enabled = 0; return; } efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab; @@ -694,10 +700,10 @@ void __init efi_init(void) ((__u64)boot_params.efi_info.efi_systab_hi<<32)); #endif - if (efi_systab_init(efi_phys.systab)) { - efi_enabled = 0; + if (efi_systab_init(efi_phys.systab)) return; - } + + set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility); /* * Show what we know for posterity @@ -715,10 +721,10 @@ void __init efi_init(void) efi.systab->hdr.revision >> 16, efi.systab->hdr.revision & 0xffff, vendor); - if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) { - efi_enabled = 0; + if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) return; - } + + set_bit(EFI_CONFIG_TABLES, &x86_efi_facility); /* * Note: We currently don't support runtime services on an EFI @@ -727,15 +733,17 @@ void __init efi_init(void) if (!efi_is_native()) pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n"); - else if (efi_runtime_init()) { - efi_enabled = 0; - return; + else { + if (efi_runtime_init()) + return; + set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility); } - if (efi_memmap_init()) { - efi_enabled = 0; + if (efi_memmap_init()) return; - } + + set_bit(EFI_MEMMAP, &x86_efi_facility); + #ifdef CONFIG_X86_32 if (efi_is_native()) { x86_platform.get_wallclock = efi_get_time; @@ -969,6 +977,9 @@ u32 efi_mem_type(unsigned long phys_addr) efi_memory_desc_t *md; void *p; + if (!efi_enabled(EFI_MEMMAP)) + return 0; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { md = p; if ((md->phys_addr <= phys_addr) && diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 3ff267861541..bd22f8667eed 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -250,7 +250,7 @@ acpi_physical_address __init acpi_os_get_root_pointer(void) return acpi_rsdp; #endif - if (efi_enabled) { + if (efi_enabled(EFI_CONFIG_TABLES)) { if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) return efi.acpi20; else if (efi.acpi != EFI_INVALID_TABLE_ADDR) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index fd3ae6290d71..982f1f5f5742 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -471,7 +471,7 @@ void __init dmi_scan_machine(void) char __iomem *p, *q; int rc; - if (efi_enabled) { + if (efi_enabled(EFI_CONFIG_TABLES)) { if (efi.smbios == EFI_INVALID_TABLE_ADDR) goto error; diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 7b1c37497c9a..1065119dff92 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -1782,7 +1782,7 @@ efivars_init(void) printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION, EFIVARS_DATE); - if (!efi_enabled) + if (!efi_enabled(EFI_RUNTIME_SERVICES)) return 0; /* For now we'll register the efi directory at /sys/firmware/efi */ @@ -1822,7 +1822,7 @@ err_put: static void __exit efivars_exit(void) { - if (efi_enabled) { + if (efi_enabled(EFI_RUNTIME_SERVICES)) { unregister_efivars(&__efivars); kobject_put(efi_kobj); } diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index 4da4eb9ae926..2224f1dc074b 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -99,7 +99,7 @@ unsigned long __init find_ibft_region(unsigned long *sizep) /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will * only use ACPI for this */ - if (!efi_enabled) + if (!efi_enabled(EFI_BOOT)) find_ibft_in_mem(); if (ibft_addr) { diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index edfc54e41842..0d6562bb0c93 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -429,7 +429,8 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; - if (efi_enabled && rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) + if (efi_enabled(EFI_BOOT) && + rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) return false; /* first check CRTCs */ diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 7481146a5b47..97c2be195efc 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -244,7 +244,7 @@ static int __init ibm_rtl_init(void) { if (force) pr_warn("module loaded by force\n"); /* first ensure that we are running on IBM HW */ - else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table)) + else if (efi_enabled(EFI_BOOT) || !dmi_check_system(ibm_rtl_dmi_table)) return -ENODEV; /* Get the address for the Extended BIOS Data Area */ diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index d73fdcfeb45a..2839baa82a5a 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -633,7 +633,7 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) return -ENOMEM; pci_set_drvdata(pdev, pci_info); - if (efi_enabled) + if (efi_enabled(EFI_RUNTIME_SERVICES)) orom = isci_get_efi_var(pdev); if (!orom) diff --git a/include/linux/efi.h b/include/linux/efi.h index 8b84916dc671..7a9498ab3c2d 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -618,18 +618,30 @@ extern int __init efi_setup_pcdp_console(char *); #endif /* - * We play games with efi_enabled so that the compiler will, if possible, remove - * EFI-related code altogether. + * We play games with efi_enabled so that the compiler will, if + * possible, remove EFI-related code altogether. */ +#define EFI_BOOT 0 /* Were we booted from EFI? */ +#define EFI_SYSTEM_TABLES 1 /* Can we use EFI system tables? */ +#define EFI_CONFIG_TABLES 2 /* Can we use EFI config tables? */ +#define EFI_RUNTIME_SERVICES 3 /* Can we use runtime services? */ +#define EFI_MEMMAP 4 /* Can we use EFI memory map? */ +#define EFI_64BIT 5 /* Is the firmware 64-bit? */ + #ifdef CONFIG_EFI # ifdef CONFIG_X86 - extern int efi_enabled; - extern bool efi_64bit; +extern int efi_enabled(int facility); # else -# define efi_enabled 1 +static inline int efi_enabled(int facility) +{ + return 1; +} # endif #else -# define efi_enabled 0 +static inline int efi_enabled(int facility) +{ + return 0; +} #endif /* diff --git a/init/main.c b/init/main.c index 85d69dffe864..cd30179c86bd 100644 --- a/init/main.c +++ b/init/main.c @@ -604,7 +604,7 @@ asmlinkage void __init start_kernel(void) pidmap_init(); anon_vma_init(); #ifdef CONFIG_X86 - if (efi_enabled) + if (efi_enabled(EFI_RUNTIME_SERVICES)) efi_enter_virtual_mode(); #endif thread_info_cache_init(); @@ -632,7 +632,7 @@ asmlinkage void __init start_kernel(void) acpi_early_init(); /* before LAPIC and SMP init */ sfi_init_late(); - if (efi_enabled) { + if (efi_enabled(EFI_RUNTIME_SERVICES)) { efi_late_init(); efi_free_boot_services(); } -- cgit From e0094244e41c4d0c7ad69920681972fc45d8ce34 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 3 Jan 2013 09:02:37 +0000 Subject: samsung-laptop: Disable on EFI hardware It has been reported that running this driver on some Samsung laptops with EFI can cause those machines to become bricked as detailed in the following report, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 There have also been reports of this driver causing Machine Check Exceptions on recent EFI-enabled Samsung laptops, https://bugzilla.kernel.org/show_bug.cgi?id=47121 So disable it if booting from EFI since this driver relies on grovelling around in the BIOS memory map which isn't going to work. Cc: Corentin Chary Cc: Matthew Garrett Cc: Colin Ian King Cc: Steve Langasek Cc: Signed-off-by: Matt Fleming Signed-off-by: H. Peter Anvin --- drivers/platform/x86/samsung-laptop.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index 71623a2ff3e8..d1f030053176 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -26,6 +26,7 @@ #include #include #include +#include #include /* @@ -1544,6 +1545,9 @@ static int __init samsung_init(void) struct samsung_laptop *samsung; int ret; + if (efi_enabled(EFI_BOOT)) + return -ENODEV; + quirks = &samsung_unknown; if (!force && !dmi_check_system(samsung_dmi_table)) return -ENODEV; -- cgit