From 6348a34dcb98d8e285685a205f2a601817fa2d38 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 28 Feb 2020 15:24:52 -0600 Subject: PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe strings Previously some PCI speed strings came from pci_speed_string(), some came from the PCIe-specific PCIE_SPEED2STR(), and some came from a PCIe-specific switch statement. These methods were inconsistent: pci_speed_string() PCIE_SPEED2STR() switch ------------------ ---------------- ------ 33 MHz PCI ... 2.5 GT/s PCIe 2.5 GT/s 2.5 GT/s 5.0 GT/s PCIe 5 GT/s 5 GT/s 8.0 GT/s PCIe 8 GT/s 8 GT/s 16.0 GT/s PCIe 16 GT/s 16 GT/s 32.0 GT/s PCIe 32 GT/s 32 GT/s Standardize on pci_speed_string() as the single source of these strings. Note that this adds ".0" and "PCIe" to some messages, including sysfs "max_link_speed" files, a brcmstb "link up" message, and the link status dmesg logging, e.g., nvme 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) I think it's better to standardize on a single version of the speed text. Previously we had strings like this: /sys/bus/pci/slots/0/cur_bus_speed: 8.0 GT/s PCIe /sys/bus/pci/slots/0/max_bus_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8 GT/s /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8 GT/s This changes the latter two to match the slots files: /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8.0 GT/s PCIe Based-on-patch by: Yicong Yang Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-brcmstb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci/controller') diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index d20aabc26273..7234eb2a54c9 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -824,8 +824,8 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta); nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); dev_info(dev, "link up, %s x%u %s\n", - PCIE_SPEED2STR(cls + PCI_SPEED_133MHz_PCIX_533), - nlw, ssc_good ? "(SSC)" : "(!SSC)"); + pci_speed_string(pcie_link_speed[cls]), nlw, + ssc_good ? "(SSC)" : "(!SSC)"); /* PCIe->SCB endian mode for BAR */ tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); -- cgit v1.2.3-73-gaa49b