From 4eb8080143a9d9fd513bacc65b2466c57983aaae Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Thu, 11 Oct 2018 10:17:34 +0300 Subject: igc: Add setup link functionality Add link establishment methods Add auto negotiation methods Add read MAC address method Signed-off-by: Sasha Neftin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igc/igc_phy.c | 334 +++++++++++++++++++++++++++++++ 1 file changed, 334 insertions(+) (limited to 'drivers/net/ethernet/intel/igc/igc_phy.c') diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c index 88583c1d4970..38e43e6fc1c7 100644 --- a/drivers/net/ethernet/intel/igc/igc_phy.c +++ b/drivers/net/ethernet/intel/igc/igc_phy.c @@ -3,6 +3,10 @@ #include "igc_phy.h" +/* forward declaration */ +static s32 igc_phy_setup_autoneg(struct igc_hw *hw); +static s32 igc_wait_autoneg(struct igc_hw *hw); + /** * igc_check_reset_block - Check if PHY reset is blocked * @hw: pointer to the HW structure @@ -211,6 +215,336 @@ out: return ret_val; } +/** + * igc_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + */ +static s32 igc_copper_link_autoneg(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 phy_ctrl; + s32 ret_val; + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (phy->autoneg_advertised == 0) + phy->autoneg_advertised = phy->autoneg_mask; + + hw_dbg("Reconfiguring auto-neg advertisement params\n"); + ret_val = igc_phy_setup_autoneg(hw); + if (ret_val) { + hw_dbg("Error Setting up Auto-Negotiation\n"); + goto out; + } + hw_dbg("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + goto out; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + goto out; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = igc_wait_autoneg(hw); + if (ret_val) { + hw_dbg("Error while waiting for autoneg to complete\n"); + goto out; + } + } + + hw->mac.get_link_status = true; + +out: + return ret_val; +} + +/** + * igc_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + */ +static s32 igc_wait_autoneg(struct igc_hw *hw) +{ + u16 i, phy_status; + s32 ret_val = 0; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msleep(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * igc_phy_setup_autoneg - Configure PHY for auto-negotiation + * @hw: pointer to the HW structure + * + * Reads the MII auto-neg advertisement register and/or the 1000T control + * register and if the PHY is already setup for auto-negotiation, then + * return successful. Otherwise, setup advertisement and flow control to + * the appropriate values for the wanted auto-negotiation. + */ +static s32 igc_phy_setup_autoneg(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 aneg_multigbt_an_ctrl = 0; + u16 mii_1000t_ctrl_reg = 0; + u16 mii_autoneg_adv_reg; + s32 ret_val; + + phy->autoneg_advertised &= phy->autoneg_mask; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, + &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } + + if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && + hw->phy.id == I225_I_PHY_ID) { + /* Read the MULTI GBT AN Control Register - reg 7.32 */ + ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK << + MMD_DEVADDR_SHIFT) | + ANEG_MULTIGBT_AN_CTRL, + &aneg_multigbt_an_ctrl); + + if (ret_val) + return ret_val; + } + + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); + mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + + hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); + + /* Do we want to advertise 10 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_HALF) { + hw_dbg("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } + + /* Do we want to advertise 10 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_FULL) { + hw_dbg("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } + + /* Do we want to advertise 100 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_HALF) { + hw_dbg("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } + + /* Do we want to advertise 100 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_FULL) { + hw_dbg("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } + + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_1000_HALF) + hw_dbg("Advertise 1000mb Half duplex request denied!\n"); + + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { + hw_dbg("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } + + /* We do not allow the Phy to advertise 2500 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_2500_HALF) + hw_dbg("Advertise 2500mb Half duplex request denied!\n"); + + /* Do we want to advertise 2500 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_2500_FULL) { + hw_dbg("Advertise 2500mb Full duplex\n"); + aneg_multigbt_an_ctrl |= CR_2500T_FD_CAPS; + } else { + aneg_multigbt_an_ctrl &= ~CR_2500T_FD_CAPS; + } + + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc.current_mode) { + case igc_fc_none: + /* Flow control (Rx & Tx) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case igc_fc_rx_pause: + /* Rx Flow control is enabled, and Tx Flow control is + * disabled, by a software over-ride. + * + * Since there really isn't a way to advertise that we are + * capable of Rx Pause ONLY, we will advertise that we + * support both symmetric and asymmetric Rx PAUSE. Later + * (in igc_config_fc_after_link_up) we will disable the + * hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case igc_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case igc_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + hw_dbg("Flow control param set incorrectly\n"); + return -IGC_ERR_CONFIG; + } + + ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + + if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && + hw->phy.id == I225_I_PHY_ID) + ret_val = phy->ops.write_reg(hw, + (STANDARD_AN_REG_MASK << + MMD_DEVADDR_SHIFT) | + ANEG_MULTIGBT_AN_CTRL, + aneg_multigbt_an_ctrl); + + return ret_val; +} + +/** + * igc_setup_copper_link - Configure copper link settings + * @hw: pointer to the HW structure + * + * Calls the appropriate function to configure the link for auto-neg or forced + * speed and duplex. Then we check for link, once link is established calls + * to configure collision distance and flow control are called. If link is + * not established, we return -IGC_ERR_PHY (-2). + */ +s32 igc_setup_copper_link(struct igc_hw *hw) +{ + s32 ret_val = 0; + bool link; + + if (hw->mac.autoneg) { + /* Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = igc_copper_link_autoneg(hw); + if (ret_val) + goto out; + } else { + /* PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + hw_dbg("Forcing Speed and Duplex\n"); + ret_val = hw->phy.ops.force_speed_duplex(hw); + if (ret_val) { + hw_dbg("Error Forcing Speed and Duplex\n"); + goto out; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = igc_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link); + if (ret_val) + goto out; + + if (link) { + hw_dbg("Valid link established!!!\n"); + igc_config_collision_dist(hw); + ret_val = igc_config_fc_after_link_up(hw); + } else { + hw_dbg("Unable to establish link!!!\n"); + } + +out: + return ret_val; +} + /** * igc_read_phy_reg_mdic - Read MDI control register * @hw: pointer to the HW structure -- cgit