From 541ab84d2b6ea79021d5df0b54d81600334fa2a4 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 24 May 2018 15:54:03 +0300 Subject: drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: stable@vger.kernel.org Cc: Vito Caputo Reported-by: Vito Caputo Fixes: e995ca0b8139 ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804 Tested-by: Arkadiusz Miskiewicz (cherry picked from commit e4dd27aadd205417a2e9ea9902b698a0252ec3a0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_dp.c') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8320f0e8e3be..6cce43a6eaad 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -420,6 +420,9 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_rate, mode_rate, max_lanes, max_link_clock; int max_dotclk; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + max_dotclk = intel_dp_downstream_max_dotclock(intel_dp); if (intel_dp_is_edp(intel_dp) && fixed_mode) { @@ -1862,6 +1865,9 @@ intel_dp_compute_config(struct intel_encoder *encoder, conn_state->scaling_mode); } + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return false; + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) return false; -- cgit From 1e34f1d36804be1a446212a33ca5397bf0e5acdd Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 13 Jun 2018 19:05:52 +0300 Subject: drm/i915: Disallow interlaced modes on g4x DP outputs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like interlaced DP output doesn't work on g4x either. Not all that surprising considering we already established that interlaced DP output is busted on VLV/CHV. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-1-ville.syrjala@linux.intel.com (cherry picked from commit 929168c5f3df5d9ea0ef426c33e971157d045eab) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_dp.c') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 6cce43a6eaad..2bdfe4b2d6dc 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1868,7 +1868,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) return false; - if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + if (HAS_GMCH_DISPLAY(dev_priv) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) return false; @@ -6343,7 +6343,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); - if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) + if (!HAS_GMCH_DISPLAY(dev_priv)) connector->interlace_allowed = true; connector->doublescan_allowed = 0; -- cgit From 4dccc4d517481282e84335c7acbfd7a1481004b8 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 13 Jun 2018 19:05:53 +0300 Subject: drm/i915: Turn off g4x DP port in .post_disable() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While Bspec doesn't list a specific sequence for turning off the DP port on g4x we are getting an underrun if the port is disabled in the .disable() hook. Looks like the pipe stops when the port stops, and by that time the plane disable may not have completed yet. Also the plane(s) seem to end up in some wonky state when this happens as they also signal another underrun immediately after we turn them back on during the next enable sequence. We could add a vblank wait in .disable() to avoid wedging the planes, but I assume we're still tripping up the pipe in some way. So it seems better to me to just follow the ILK+ sequence and turn off the DP port in .post_disable() instead. This sequence doesn't seem to suffer from this problem. Could be it was always the intended sequence for DP and the gen4 bspec was just never updated to include it. Originally we used the bad sequence even on ilk+, but I changed that in commit 08aff3fe26ae ("drm/i915: Move DP port disable to post_disable for pch platforms") as it was causing issues on those platforms as well. I left out g4x then only because I didn't have the hardware to test it. Now that I do it's fairly clear that the ilk+ sequence is also the right choice for g4x. v2: Fix whitespace fail (Jani) Mention the ilk+ commit (Jani) Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit 51a9f6dfc00d35f927ecfaf6f0ae8ebaba39b3fe) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_dp.c') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2bdfe4b2d6dc..16faea30114a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2788,16 +2788,6 @@ static void intel_disable_dp(struct intel_encoder *encoder, static void g4x_disable_dp(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) -{ - intel_disable_dp(encoder, old_crtc_state, old_conn_state); - - /* disable the port before the pipe on g4x */ - intel_dp_link_down(encoder, old_crtc_state); -} - -static void ilk_disable_dp(struct intel_encoder *encoder, - const struct intel_crtc_state *old_crtc_state, - const struct drm_connector_state *old_conn_state) { intel_disable_dp(encoder, old_crtc_state, old_conn_state); } @@ -2813,13 +2803,19 @@ static void vlv_disable_dp(struct intel_encoder *encoder, intel_disable_dp(encoder, old_crtc_state, old_conn_state); } -static void ilk_post_disable_dp(struct intel_encoder *encoder, +static void g4x_post_disable_dp(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); enum port port = encoder->port; + /* + * Bspec does not list a specific disable sequence for g4x DP. + * Follow the ilk+ sequence (disable pipe before the port) for + * g4x DP as it does not suffer from underruns like the normal + * g4x modeset sequence (disable pipe after the port). + */ intel_dp_link_down(encoder, old_crtc_state); /* Only ilk+ has port A */ @@ -6442,15 +6438,11 @@ bool intel_dp_init(struct drm_i915_private *dev_priv, intel_encoder->enable = vlv_enable_dp; intel_encoder->disable = vlv_disable_dp; intel_encoder->post_disable = vlv_post_disable_dp; - } else if (INTEL_GEN(dev_priv) >= 5) { - intel_encoder->pre_enable = g4x_pre_enable_dp; - intel_encoder->enable = g4x_enable_dp; - intel_encoder->disable = ilk_disable_dp; - intel_encoder->post_disable = ilk_post_disable_dp; } else { intel_encoder->pre_enable = g4x_pre_enable_dp; intel_encoder->enable = g4x_enable_dp; intel_encoder->disable = g4x_disable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; } intel_dig_port->dp.output_reg = output_reg; -- cgit