From 4902c2025b8ade9c230d4bca25ec5f691e91cb1f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 26 Jul 2017 16:47:27 +0300 Subject: clk: ti: add support for register read-modify-write low-level operation Useful for changing few bits on a register, this makes sure for example that the operation is done atomically in case of syscon. Signed-off-by: Tero Kristo --- drivers/clk/ti/clk.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c index f4d6802a8544..4efa2c9ea908 100644 --- a/drivers/clk/ti/clk.c +++ b/drivers/clk/ti/clk.c @@ -55,6 +55,29 @@ static void clk_memmap_writel(u32 val, const struct clk_omap_reg *reg) writel_relaxed(val, io->mem + reg->offset); } +static void _clk_rmw(u32 val, u32 mask, void __iomem *ptr) +{ + u32 v; + + v = readl_relaxed(ptr); + v &= ~mask; + v |= val; + writel_relaxed(v, ptr); +} + +static void clk_memmap_rmw(u32 val, u32 mask, const struct clk_omap_reg *reg) +{ + struct clk_iomap *io = clk_memmaps[reg->index]; + + if (reg->ptr) { + _clk_rmw(val, mask, reg->ptr); + } else if (io->regmap) { + regmap_update_bits(io->regmap, reg->offset, mask, val); + } else { + _clk_rmw(val, mask, io->mem + reg->offset); + } +} + static u32 clk_memmap_readl(const struct clk_omap_reg *reg) { u32 val; @@ -89,6 +112,7 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops) ti_clk_ll_ops = ops; ops->clk_readl = clk_memmap_readl; ops->clk_writel = clk_memmap_writel; + ops->clk_rmw = clk_memmap_rmw; return 0; } -- cgit From e31922eda18c950d6b51450711ae459b97eae097 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 26 Jul 2017 16:47:28 +0300 Subject: clk: ti: add generic support for clock latching Certain clocks require latching to be done, so that the actual settings get updated on the HW that generates the clock signal. One example of such a clock is the dra76x GMAC DPLL H14 output, which requires its divider settings to be latched when updated. Signed-off-by: Tero Kristo --- drivers/clk/ti/clk.c | 14 ++++++++++++++ drivers/clk/ti/clock.h | 2 ++ 2 files changed, 16 insertions(+) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c index 4efa2c9ea908..7d22e1af2247 100644 --- a/drivers/clk/ti/clk.c +++ b/drivers/clk/ti/clk.c @@ -275,6 +275,20 @@ int ti_clk_get_reg_addr(struct device_node *node, int index, return 0; } +void ti_clk_latch(struct clk_omap_reg *reg, s8 shift) +{ + u32 latch; + + if (shift < 0) + return; + + latch = 1 << shift; + + ti_clk_ll_ops->clk_rmw(latch, latch, reg); + ti_clk_ll_ops->clk_rmw(0, latch, reg); + ti_clk_ll_ops->clk_readl(reg); /* OCP barrier */ +} + /** * omap2_clk_provider_init - init master clock provider * @parent: master node diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index d9b43bfc2532..2f8af8fd886a 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -194,6 +194,8 @@ struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw, int ti_clk_add_alias(struct device *dev, struct clk *clk, const char *con); void ti_clk_add_aliases(void); +void ti_clk_latch(struct clk_omap_reg *reg, s8 shift); + struct clk_hw *ti_clk_build_component_mux(struct ti_clk_mux *setup); int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div, -- cgit From b44a03008da5e20e24c0d11d566796fb9b0f912e Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 15 Feb 2018 09:49:27 +0200 Subject: clk: ti: add support for clock latching to divider clocks Latching the clock settings is needed with certain clocks, where the setting is "cached" in HW before doing the actual re-programming of the clock source. This patch adds support for clock latching to the divider clock. Signed-off-by: Tero Kristo --- drivers/clk/ti/clock.h | 1 + drivers/clk/ti/divider.c | 26 ++++++++++++++++++++------ 2 files changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index 2f8af8fd886a..62b108cc10de 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -22,6 +22,7 @@ struct clk_omap_divider { u8 shift; u8 width; u8 flags; + s8 latch; const struct clk_div_table *table; }; diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index 77f93f6d2806..aaa277dd6d99 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -263,6 +263,8 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, val |= value << divider->shift; ti_clk_ll_ops->clk_writel(val, ÷r->reg); + ti_clk_latch(÷r->reg, divider->latch); + return 0; } @@ -276,7 +278,8 @@ static struct clk *_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, struct clk_omap_reg *reg, - u8 shift, u8 width, u8 clk_divider_flags, + u8 shift, u8 width, s8 latch, + u8 clk_divider_flags, const struct clk_div_table *table) { struct clk_omap_divider *div; @@ -305,6 +308,7 @@ static struct clk *_register_divider(struct device *dev, const char *name, memcpy(&div->reg, reg, sizeof(*reg)); div->shift = shift; div->width = width; + div->latch = latch; div->flags = clk_divider_flags; div->hw.init = &init; div->table = table; @@ -420,6 +424,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup) div->table = _get_div_table_from_setup(setup, &div->width); div->shift = setup->bit_shift; + div->latch = -EINVAL; return &div->hw; } @@ -452,7 +457,7 @@ struct clk *ti_clk_register_divider(struct ti_clk *setup) clk = _register_divider(NULL, setup->name, div->parent, flags, ®, div->bit_shift, - width, div_flags, table); + width, -EINVAL, div_flags, table); if (IS_ERR(clk)) kfree(table); @@ -556,7 +561,7 @@ static int _get_divider_width(struct device_node *node, static int __init ti_clk_divider_populate(struct device_node *node, struct clk_omap_reg *reg, const struct clk_div_table **table, - u32 *flags, u8 *div_flags, u8 *width, u8 *shift) + u32 *flags, u8 *div_flags, u8 *width, u8 *shift, s8 *latch) { u32 val; int ret; @@ -570,6 +575,13 @@ static int __init ti_clk_divider_populate(struct device_node *node, else *shift = 0; + if (latch) { + if (!of_property_read_u32(node, "ti,latch-bit", &val)) + *latch = val; + else + *latch = -EINVAL; + } + *flags = 0; *div_flags = 0; @@ -606,17 +618,18 @@ static void __init of_ti_divider_clk_setup(struct device_node *node) u8 clk_divider_flags = 0; u8 width = 0; u8 shift = 0; + s8 latch = -EINVAL; const struct clk_div_table *table = NULL; u32 flags = 0; parent_name = of_clk_get_parent_name(node, 0); if (ti_clk_divider_populate(node, ®, &table, &flags, - &clk_divider_flags, &width, &shift)) + &clk_divider_flags, &width, &shift, &latch)) goto cleanup; clk = _register_divider(NULL, node->name, parent_name, flags, ®, - shift, width, clk_divider_flags, table); + shift, width, latch, clk_divider_flags, table); if (!IS_ERR(clk)) { of_clk_add_provider(node, of_clk_src_simple_get, clk); @@ -639,7 +652,8 @@ static void __init of_ti_composite_divider_clk_setup(struct device_node *node) return; if (ti_clk_divider_populate(node, &div->reg, &div->table, &val, - &div->flags, &div->width, &div->shift) < 0) + &div->flags, &div->width, &div->shift, + NULL) < 0) goto cleanup; if (!ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER)) -- cgit From ee2fc3c5ca8dad3906dd1d578e72d5272083220c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 15 Feb 2018 09:50:02 +0200 Subject: clk: ti: add support for clock latching to mux clocks Latching the clock settings is needed with certain clocks, where the setting is "cached" in HW before doing the actual re-programming of the clock source. This patch adds support for clock latching to the mux clock. Signed-off-by: Tero Kristo --- drivers/clk/ti/clock.h | 1 + drivers/clk/ti/mux.c | 13 ++++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index 62b108cc10de..90b86aadfda7 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -34,6 +34,7 @@ struct clk_omap_mux { u32 *table; u32 mask; u8 shift; + s8 latch; u8 flags; }; diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index d4705803f3d3..69a4308a5a98 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -86,6 +86,7 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index) } val |= index << mux->shift; ti_clk_ll_ops->clk_writel(val, &mux->reg); + ti_clk_latch(&mux->reg, mux->latch); return 0; } @@ -100,7 +101,7 @@ static struct clk *_register_mux(struct device *dev, const char *name, const char * const *parent_names, u8 num_parents, unsigned long flags, struct clk_omap_reg *reg, u8 shift, u32 mask, - u8 clk_mux_flags, u32 *table) + s8 latch, u8 clk_mux_flags, u32 *table) { struct clk_omap_mux *mux; struct clk *clk; @@ -121,6 +122,7 @@ static struct clk *_register_mux(struct device *dev, const char *name, memcpy(&mux->reg, reg, sizeof(*reg)); mux->shift = shift; mux->mask = mask; + mux->latch = latch; mux->flags = clk_mux_flags; mux->table = table; mux->hw.init = &init; @@ -160,7 +162,7 @@ struct clk *ti_clk_register_mux(struct ti_clk *setup) flags |= CLK_SET_RATE_PARENT; return _register_mux(NULL, setup->name, mux->parents, mux->num_parents, - flags, ®, mux->bit_shift, mask, + flags, ®, mux->bit_shift, mask, -EINVAL, mux_flags, NULL); } @@ -179,6 +181,7 @@ static void of_mux_clk_setup(struct device_node *node) u8 clk_mux_flags = 0; u32 mask = 0; u32 shift = 0; + s32 latch = -EINVAL; u32 flags = CLK_SET_RATE_NO_REPARENT; num_parents = of_clk_get_parent_count(node); @@ -197,6 +200,8 @@ static void of_mux_clk_setup(struct device_node *node) of_property_read_u32(node, "ti,bit-shift", &shift); + of_property_read_u32(node, "ti,latch-bit", &latch); + if (of_property_read_bool(node, "ti,index-starts-at-one")) clk_mux_flags |= CLK_MUX_INDEX_ONE; @@ -211,7 +216,8 @@ static void of_mux_clk_setup(struct device_node *node) mask = (1 << fls(mask)) - 1; clk = _register_mux(NULL, node->name, parent_names, num_parents, - flags, ®, shift, mask, clk_mux_flags, NULL); + flags, ®, shift, mask, latch, clk_mux_flags, + NULL); if (!IS_ERR(clk)) of_clk_add_provider(node, of_clk_src_simple_get, clk); @@ -234,6 +240,7 @@ struct clk_hw *ti_clk_build_component_mux(struct ti_clk_mux *setup) return ERR_PTR(-ENOMEM); mux->shift = setup->bit_shift; + mux->latch = -EINVAL; mux->reg.index = setup->module; mux->reg.offset = setup->reg; -- cgit From 269bd202bc0fd04e841cb123867fd3f49e04ace9 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 27 Mar 2018 20:47:04 +0300 Subject: clk: ti: fix flag space conflict with clkctrl clocks The introduction of support for CLK_SET_RATE_PARENT flag for clkctrl clocks used a generic clock flag, which causes a conflict with the rest of the clkctrl flags, namely the NO_IDLEST flag. This can cause boot failures on certain platforms where this flag is introduced, by omitting the wait for the clockctrl module to be fully enabled before proceeding with rest of the code. Fix this by moving all the clkctrl specific flags to their own bit-range. Signed-off-by: Tero Kristo Fixes: 49159a9dc3da ("clk: ti: add support for CLK_SET_RATE_PARENT flag") Reported-by: Christophe Lyon Tested-by: Tony Lindgren --- drivers/clk/ti/clock.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/clk/ti') diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index d9b43bfc2532..b799a21463d9 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -74,6 +74,11 @@ enum { #define CLKF_CORE (1 << 9) #define CLKF_J_TYPE (1 << 10) +/* CLKCTRL flags */ +#define CLKF_SW_SUP BIT(5) +#define CLKF_HW_SUP BIT(6) +#define CLKF_NO_IDLEST BIT(7) + #define CLK(dev, con, ck) \ { \ .lk = { \ @@ -183,10 +188,6 @@ extern const struct omap_clkctrl_data am438x_clkctrl_data[]; extern const struct omap_clkctrl_data dm814_clkctrl_data[]; extern const struct omap_clkctrl_data dm816_clkctrl_data[]; -#define CLKF_SW_SUP BIT(0) -#define CLKF_HW_SUP BIT(1) -#define CLKF_NO_IDLEST BIT(2) - typedef void (*ti_of_clk_init_cb_t)(void *, struct device_node *); struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw, -- cgit