From 3945ac36af3da6014cde9836c5acc5b3adaaa379 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 6 Feb 2007 19:13:44 -0200 Subject: ACPI: ibm-acpi: cleanup init and exit paths Fix a small memory leak on module removal, and other assorted minor cleanups on the module init codepath. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index c6144ca66638..2429e1180fa9 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -496,6 +496,10 @@ static int ibm_acpi_driver_init(void) printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); printk(IBM_INFO "%s\n", IBM_URL); + if (ibm_thinkpad_ec_found) + printk(IBM_INFO "ThinkPad EC firmware %s\n", + ibm_thinkpad_ec_found); + return 0; } @@ -2617,7 +2621,7 @@ static void __init ibm_handle_init(char *name, ibm_handle_init(#object, &object##_handle, *object##_parent, \ object##_paths, ARRAY_SIZE(object##_paths), &object##_path) -static int set_ibm_param(const char *val, struct kernel_param *kp) +static int __init set_ibm_param(const char *val, struct kernel_param *kp) { unsigned int i; @@ -2659,7 +2663,8 @@ static void acpi_ibm_exit(void) for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) ibm_exit(&ibms[i]); - remove_proc_entry(IBM_DIR, acpi_root_dir); + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); if (ibm_thinkpad_ec_found) kfree(ibm_thinkpad_ec_found); @@ -2710,9 +2715,6 @@ static int __init acpi_ibm_init(void) /* Models with newer firmware report the EC in DMI */ ibm_thinkpad_ec_found = check_dmi_for_ec(); - if (ibm_thinkpad_ec_found) - printk(IBM_INFO "ThinkPad EC firmware %s\n", - ibm_thinkpad_ec_found); /* these handles are not required */ IBM_HANDLE_INIT(vid); @@ -2742,6 +2744,7 @@ static int __init acpi_ibm_init(void) proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir); if (!proc_dir) { printk(IBM_ERR "unable to create proc dir %s", IBM_DIR); + acpi_ibm_exit(); return -ENODEV; } proc_dir->owner = THIS_MODULE; -- cgit From 5ee6edbcde4d3b14e4e03d4b331df1099a34aa8d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 10 Feb 2007 01:18:25 -0500 Subject: ACPI: hotkey: remove driver, per feature-removal-schedule.txt Signed-off-by: Len Brown --- Documentation/acpi-hotkey.txt | 38 - Documentation/feature-removal-schedule.txt | 23 - drivers/acpi/Kconfig | 9 - drivers/acpi/Makefile | 1 - drivers/acpi/asus_acpi.c | 4 - drivers/acpi/hotkey.c | 1042 ---------------------------- drivers/acpi/ibm_acpi.c | 5 - drivers/acpi/osl.c | 11 - drivers/acpi/toshiba_acpi.c | 4 - drivers/misc/asus-laptop.c | 5 - include/acpi/acpi_drivers.h | 6 - 11 files changed, 1148 deletions(-) delete mode 100644 Documentation/acpi-hotkey.txt delete mode 100644 drivers/acpi/hotkey.c (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/Documentation/acpi-hotkey.txt b/Documentation/acpi-hotkey.txt deleted file mode 100644 index 38040fa37649..000000000000 --- a/Documentation/acpi-hotkey.txt +++ /dev/null @@ -1,38 +0,0 @@ -driver/acpi/hotkey.c implement: -1. /proc/acpi/hotkey/event_config -(event based hotkey or event config interface): -a. add a event based hotkey(event) : -echo "0:bus::action:method:num:num" > event_config - -b. delete a event based hotkey(event): -echo "1:::::num:num" > event_config - -c. modify a event based hotkey(event): -echo "2:bus::action:method:num:num" > event_config - -2. /proc/acpi/hotkey/poll_config -(polling based hotkey or event config interface): -a.add a polling based hotkey(event) : -echo "0:bus:method:action:method:num" > poll_config -this adding command will create a proc file -/proc/acpi/hotkey/method, which is used to get -result of polling. - -b.delete a polling based hotkey(event): -echo "1:::::num" > event_config - -c.modify a polling based hotkey(event): -echo "2:bus:method:action:method:num" > poll_config - -3./proc/acpi/hotkey/action -(interface to call aml method associated with a -specific hotkey(event)) -echo "event_num:event_type:event_argument" > - /proc/acpi/hotkey/action. -The result of the execution of this aml method is -attached to /proc/acpi/hotkey/poll_method, which is dynamically -created. Please use command "cat /proc/acpi/hotkey/polling_method" -to retrieve it. - -Note: Use cmdline "acpi_generic_hotkey" to over-ride -platform-specific with generic driver. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index fa844fd7bded..7dec8e0193c0 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -246,29 +246,6 @@ Who: Venkatesh Pallipadi --------------------------- -<<<<<<< test:Documentation/feature-removal-schedule.txt -What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY) -When: 2.6.21 -Why: hotkey.c was an attempt to consolidate multiple drivers that use - ACPI to implement hotkeys. However, hotkeys are not documented - in the ACPI specification, so the drivers used undocumented - vendor-specific hooks and turned out to be more different than - the same. - - Further, the keys and the features supplied by each platform - are different, so there will always be a need for - platform-specific drivers. - - So the new plan is to delete hotkey.c and instead, work on the - platform specific drivers to try to make them look the same - to the user when they supply the same features. - - hotkey.c has always depended on CONFIG_EXPERIMENTAL - -Who: Len Brown - ---------------------------- - What: /sys/firmware/acpi/namespace When: 2.6.21 Why: The ACPI namespace is effectively the symbol list for diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 20eacc2c9e0e..4f5bfb1e629a 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -132,15 +132,6 @@ config ACPI_VIDEO Note that this is an ref. implementation only. It may or may not work for your integrated video device. -config ACPI_HOTKEY - tristate "Generic Hotkey (EXPERIMENTAL)" - depends on EXPERIMENTAL - depends on X86 - default n - help - Experimental consolidated hotkey driver. - If you are unsure, say N. - config ACPI_FAN tristate "Fan" default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 856c32bccacb..5956e9f64a8b 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -46,7 +46,6 @@ obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_BAY) += bay.o obj-$(CONFIG_ACPI_VIDEO) += video.o -obj-$(CONFIG_ACPI_HOTKEY) += hotkey.o obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_POWER) += power.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index 31ad70a6e22e..ab8c5cb8384d 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -1365,10 +1365,6 @@ static int __init asus_acpi_init(void) if (acpi_disabled) return -ENODEV; - if (!acpi_specific_hotkey_enabled) { - printk(KERN_ERR "Using generic hotkey driver\n"); - return -ENODEV; - } asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); if (!asus_proc_dir) { printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c deleted file mode 100644 index 8edfb92f7ede..000000000000 --- a/drivers/acpi/hotkey.c +++ /dev/null @@ -1,1042 +0,0 @@ -/* - * hotkey.c - ACPI Hotkey Driver ($Revision: 0.2 $) - * - * Copyright (C) 2004 Luming Yu - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define HOTKEY_ACPI_VERSION "0.1" - -#define HOTKEY_PROC "hotkey" -#define HOTKEY_EV_CONFIG "event_config" -#define HOTKEY_PL_CONFIG "poll_config" -#define HOTKEY_ACTION "action" -#define HOTKEY_INFO "info" - -#define ACPI_HOTK_NAME "Generic Hotkey Driver" -#define ACPI_HOTK_CLASS "Hotkey" -#define ACPI_HOTK_DEVICE_NAME "Hotkey" -#define ACPI_HOTK_HID "Unknown?" -#define ACPI_HOTKEY_COMPONENT 0x20000000 - -#define ACPI_HOTKEY_EVENT 0x1 -#define ACPI_HOTKEY_POLLING 0x2 -#define ACPI_UNDEFINED_EVENT 0xf - -#define RESULT_STR_LEN 80 - -#define ACTION_METHOD 0 -#define POLL_METHOD 1 - -#define IS_EVENT(e) ((e) <= 10000 && (e) >0) -#define IS_POLL(e) ((e) > 10000) -#define IS_OTHERS(e) ((e)<=0 || (e)>=20000) -#define _COMPONENT ACPI_HOTKEY_COMPONENT -ACPI_MODULE_NAME("acpi_hotkey") - - MODULE_AUTHOR("luming.yu@intel.com"); -MODULE_DESCRIPTION(ACPI_HOTK_NAME); -MODULE_LICENSE("GPL"); - -/* standardized internal hotkey number/event */ -enum { - /* Video Extension event */ - HK_EVENT_CYCLE_OUTPUT_DEVICE = 0x80, - HK_EVENT_OUTPUT_DEVICE_STATUS_CHANGE, - HK_EVENT_CYCLE_DISPLAY_OUTPUT, - HK_EVENT_NEXT_DISPLAY_OUTPUT, - HK_EVENT_PREVIOUS_DISPLAY_OUTPUT, - HK_EVENT_CYCLE_BRIGHTNESS, - HK_EVENT_INCREASE_BRIGHTNESS, - HK_EVENT_DECREASE_BRIGHTNESS, - HK_EVENT_ZERO_BRIGHTNESS, - HK_EVENT_DISPLAY_DEVICE_OFF, - - /* Snd Card event */ - HK_EVENT_VOLUME_MUTE, - HK_EVENT_VOLUME_INCLREASE, - HK_EVENT_VOLUME_DECREASE, - - /* running state control */ - HK_EVENT_ENTERRING_S3, - HK_EVENT_ENTERRING_S4, - HK_EVENT_ENTERRING_S5, -}; - -enum conf_entry_enum { - bus_handle = 0, - bus_method = 1, - action_handle = 2, - method = 3, - LAST_CONF_ENTRY -}; - -/* procdir we use */ -static struct proc_dir_entry *hotkey_proc_dir; -static struct proc_dir_entry *hotkey_config; -static struct proc_dir_entry *hotkey_poll_config; -static struct proc_dir_entry *hotkey_action; -static struct proc_dir_entry *hotkey_info; - -/* linkage for all type of hotkey */ -struct acpi_hotkey_link { - struct list_head entries; - int hotkey_type; /* event or polling based hotkey */ - int hotkey_standard_num; /* standardized hotkey(event) number */ -}; - -/* event based hotkey */ -struct acpi_event_hotkey { - struct acpi_hotkey_link hotkey_link; - int flag; - acpi_handle bus_handle; /* bus to install notify handler */ - int external_hotkey_num; /* external hotkey/event number */ - acpi_handle action_handle; /* acpi handle attached aml action method */ - char *action_method; /* action method */ -}; - -/* - * There are two ways to poll status - * 1. directy call read_xxx method, without any arguments passed in - * 2. call write_xxx method, with arguments passed in, you need - * the result is saved in acpi_polling_hotkey.poll_result. - * anthoer read command through polling interface. - * - */ - -/* polling based hotkey */ -struct acpi_polling_hotkey { - struct acpi_hotkey_link hotkey_link; - int flag; - acpi_handle poll_handle; /* acpi handle attached polling method */ - char *poll_method; /* poll method */ - acpi_handle action_handle; /* acpi handle attached action method */ - char *action_method; /* action method */ - union acpi_object *poll_result; /* polling_result */ - struct proc_dir_entry *proc; -}; - -/* hotkey object union */ -union acpi_hotkey { - struct list_head entries; - struct acpi_hotkey_link link; - struct acpi_event_hotkey event_hotkey; - struct acpi_polling_hotkey poll_hotkey; -}; - -/* hotkey object list */ -struct acpi_hotkey_list { - struct list_head *entries; - int count; -}; - -static int auto_hotkey_add(struct acpi_device *device); -static int auto_hotkey_remove(struct acpi_device *device, int type); - -static struct acpi_driver hotkey_driver = { - .name = ACPI_HOTK_NAME, - .class = ACPI_HOTK_CLASS, - .ids = ACPI_HOTK_HID, - .ops = { - .add = auto_hotkey_add, - .remove = auto_hotkey_remove, - }, -}; - -static void free_hotkey_device(union acpi_hotkey *key); -static void free_hotkey_buffer(union acpi_hotkey *key); -static void free_poll_hotkey_buffer(union acpi_hotkey *key); -static int hotkey_open_config(struct inode *inode, struct file *file); -static int hotkey_poll_open_config(struct inode *inode, struct file *file); -static ssize_t hotkey_write_config(struct file *file, - const char __user * buffer, - size_t count, loff_t * data); -static int hotkey_info_open_fs(struct inode *inode, struct file *file); -static int hotkey_action_open_fs(struct inode *inode, struct file *file); -static ssize_t hotkey_execute_aml_method(struct file *file, - const char __user * buffer, - size_t count, loff_t * data); -static int hotkey_config_seq_show(struct seq_file *seq, void *offset); -static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset); -static int hotkey_polling_open_fs(struct inode *inode, struct file *file); -static union acpi_hotkey *get_hotkey_by_event(struct - acpi_hotkey_list - *hotkey_list, int event); - -/* event based config */ -static const struct file_operations hotkey_config_fops = { - .open = hotkey_open_config, - .read = seq_read, - .write = hotkey_write_config, - .llseek = seq_lseek, - .release = single_release, -}; - -/* polling based config */ -static const struct file_operations hotkey_poll_config_fops = { - .open = hotkey_poll_open_config, - .read = seq_read, - .write = hotkey_write_config, - .llseek = seq_lseek, - .release = single_release, -}; - -/* hotkey driver info */ -static const struct file_operations hotkey_info_fops = { - .open = hotkey_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* action */ -static const struct file_operations hotkey_action_fops = { - .open = hotkey_action_open_fs, - .read = seq_read, - .write = hotkey_execute_aml_method, - .llseek = seq_lseek, - .release = single_release, -}; - -/* polling results */ -static const struct file_operations hotkey_polling_fops = { - .open = hotkey_polling_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -struct acpi_hotkey_list global_hotkey_list; /* link all ev or pl hotkey */ -struct list_head hotkey_entries; /* head of the list of hotkey_list */ - -static int hotkey_info_seq_show(struct seq_file *seq, void *offset) -{ - - seq_printf(seq, "Hotkey generic driver ver: %s\n", HOTKEY_ACPI_VERSION); - - return 0; -} - -static int hotkey_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, hotkey_info_seq_show, PDE(inode)->data); -} - -static char *format_result(union acpi_object *object) -{ - char *buf; - - buf = kzalloc(RESULT_STR_LEN, GFP_KERNEL); - if (!buf) - return NULL; - /* Now, just support integer type */ - if (object->type == ACPI_TYPE_INTEGER) - sprintf(buf, "%d\n", (u32) object->integer.value); - return buf; -} - -static int hotkey_polling_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_polling_hotkey *poll_hotkey = seq->private; - char *buf; - - - if (poll_hotkey->poll_result) { - buf = format_result(poll_hotkey->poll_result); - if (buf) - seq_printf(seq, "%s", buf); - kfree(buf); - } - return 0; -} - -static int hotkey_polling_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, hotkey_polling_seq_show, PDE(inode)->data); -} - -static int hotkey_action_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, hotkey_info_seq_show, PDE(inode)->data); -} - -/* Mapping external hotkey number to standardized hotkey event num */ -static int hotkey_get_internal_event(int event, struct acpi_hotkey_list *list) -{ - struct list_head *entries; - int val = -1; - - - list_for_each(entries, list->entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - if (key->link.hotkey_type == ACPI_HOTKEY_EVENT - && key->event_hotkey.external_hotkey_num == event) { - val = key->link.hotkey_standard_num; - break; - } - } - - return val; -} - -static void -acpi_hotkey_notify_handler(acpi_handle handle, u32 event, void *data) -{ - struct acpi_device *device = NULL; - u32 internal_event; - - - if (acpi_bus_get_device(handle, &device)) - return; - - internal_event = hotkey_get_internal_event(event, &global_hotkey_list); - acpi_bus_generate_event(device, internal_event, 0); - - return; -} - -/* Need to invent automatically hotkey add method */ -static int auto_hotkey_add(struct acpi_device *device) -{ - /* Implement me */ - return 0; -} - -/* Need to invent automatically hotkey remove method */ -static int auto_hotkey_remove(struct acpi_device *device, int type) -{ - /* Implement me */ - return 0; -} - -/* Create a proc file for each polling method */ -static int create_polling_proc(union acpi_hotkey *device) -{ - struct proc_dir_entry *proc; - char proc_name[80]; - mode_t mode; - - mode = S_IFREG | S_IRUGO | S_IWUGO; - - sprintf(proc_name, "%d", device->link.hotkey_standard_num); - /* - strcat(proc_name, device->poll_hotkey.poll_method); - */ - proc = create_proc_entry(proc_name, mode, hotkey_proc_dir); - - if (!proc) { - return -ENODEV; - } else { - proc->proc_fops = &hotkey_polling_fops; - proc->owner = THIS_MODULE; - proc->data = device; - proc->uid = 0; - proc->gid = 0; - device->poll_hotkey.proc = proc; - } - return 0; -} - -static int hotkey_add(union acpi_hotkey *device) -{ - int status = 0; - struct acpi_device *dev = NULL; - - - if (device->link.hotkey_type == ACPI_HOTKEY_EVENT) { - acpi_bus_get_device(device->event_hotkey.bus_handle, &dev); - status = acpi_install_notify_handler(dev->handle, - ACPI_DEVICE_NOTIFY, - acpi_hotkey_notify_handler, - dev); - } else /* Add polling hotkey */ - create_polling_proc(device); - - global_hotkey_list.count++; - - list_add_tail(&device->link.entries, global_hotkey_list.entries); - - return status; -} - -static int hotkey_remove(union acpi_hotkey *device) -{ - struct list_head *entries, *next; - - - list_for_each_safe(entries, next, global_hotkey_list.entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - if (key->link.hotkey_standard_num == - device->link.hotkey_standard_num) { - list_del(&key->link.entries); - free_hotkey_device(key); - global_hotkey_list.count--; - break; - } - } - kfree(device); - return 0; -} - -static int hotkey_update(union acpi_hotkey *key) -{ - struct list_head *entries; - - - list_for_each(entries, global_hotkey_list.entries) { - union acpi_hotkey *tmp = - container_of(entries, union acpi_hotkey, entries); - if (tmp->link.hotkey_standard_num == - key->link.hotkey_standard_num) { - if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) { - free_hotkey_buffer(tmp); - tmp->event_hotkey.bus_handle = - key->event_hotkey.bus_handle; - tmp->event_hotkey.external_hotkey_num = - key->event_hotkey.external_hotkey_num; - tmp->event_hotkey.action_handle = - key->event_hotkey.action_handle; - tmp->event_hotkey.action_method = - key->event_hotkey.action_method; - kfree(key); - } else { - /* - char proc_name[80]; - - sprintf(proc_name, "%d", tmp->link.hotkey_standard_num); - strcat(proc_name, tmp->poll_hotkey.poll_method); - remove_proc_entry(proc_name,hotkey_proc_dir); - */ - free_poll_hotkey_buffer(tmp); - tmp->poll_hotkey.poll_handle = - key->poll_hotkey.poll_handle; - tmp->poll_hotkey.poll_method = - key->poll_hotkey.poll_method; - tmp->poll_hotkey.action_handle = - key->poll_hotkey.action_handle; - tmp->poll_hotkey.action_method = - key->poll_hotkey.action_method; - tmp->poll_hotkey.poll_result = - key->poll_hotkey.poll_result; - /* - create_polling_proc(tmp); - */ - kfree(key); - } - return 0; - break; - } - } - - return -ENODEV; -} - -static void free_hotkey_device(union acpi_hotkey *key) -{ - struct acpi_device *dev; - - - if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) { - acpi_bus_get_device(key->event_hotkey.bus_handle, &dev); - if (dev->handle) - acpi_remove_notify_handler(dev->handle, - ACPI_DEVICE_NOTIFY, - acpi_hotkey_notify_handler); - free_hotkey_buffer(key); - } else { - char proc_name[80]; - - sprintf(proc_name, "%d", key->link.hotkey_standard_num); - /* - strcat(proc_name, key->poll_hotkey.poll_method); - */ - remove_proc_entry(proc_name, hotkey_proc_dir); - free_poll_hotkey_buffer(key); - } - kfree(key); - return; -} - -static void free_hotkey_buffer(union acpi_hotkey *key) -{ - /* key would never be null, action method could be */ - kfree(key->event_hotkey.action_method); -} - -static void free_poll_hotkey_buffer(union acpi_hotkey *key) -{ - /* key would never be null, others could be*/ - kfree(key->poll_hotkey.action_method); - kfree(key->poll_hotkey.poll_method); - kfree(key->poll_hotkey.poll_result); -} -static int -init_hotkey_device(union acpi_hotkey *key, char **config_entry, - int std_num, int external_num) -{ - acpi_handle tmp_handle; - acpi_status status = AE_OK; - - if (std_num < 0 || IS_POLL(std_num) || !key) - goto do_fail; - - if (!config_entry[bus_handle] || !config_entry[action_handle] - || !config_entry[method]) - goto do_fail; - - key->link.hotkey_type = ACPI_HOTKEY_EVENT; - key->link.hotkey_standard_num = std_num; - key->event_hotkey.flag = 0; - key->event_hotkey.action_method = config_entry[method]; - - status = acpi_get_handle(NULL, config_entry[bus_handle], - &(key->event_hotkey.bus_handle)); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - key->event_hotkey.external_hotkey_num = external_num; - status = acpi_get_handle(NULL, config_entry[action_handle], - &(key->event_hotkey.action_handle)); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - status = acpi_get_handle(key->event_hotkey.action_handle, - config_entry[method], &tmp_handle); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - return AE_OK; -do_fail_zero: - key->event_hotkey.action_method = NULL; -do_fail: - return -ENODEV; -} - -static int -init_poll_hotkey_device(union acpi_hotkey *key, char **config_entry, - int std_num) -{ - acpi_status status = AE_OK; - acpi_handle tmp_handle; - - if (std_num < 0 || IS_EVENT(std_num) || !key) - goto do_fail; - if (!config_entry[bus_handle] ||!config_entry[bus_method] || - !config_entry[action_handle] || !config_entry[method]) - goto do_fail; - - key->link.hotkey_type = ACPI_HOTKEY_POLLING; - key->link.hotkey_standard_num = std_num; - key->poll_hotkey.flag = 0; - key->poll_hotkey.poll_method = config_entry[bus_method]; - key->poll_hotkey.action_method = config_entry[method]; - - status = acpi_get_handle(NULL, config_entry[bus_handle], - &(key->poll_hotkey.poll_handle)); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - status = acpi_get_handle(key->poll_hotkey.poll_handle, - config_entry[bus_method], &tmp_handle); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - status = - acpi_get_handle(NULL, config_entry[action_handle], - &(key->poll_hotkey.action_handle)); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - status = acpi_get_handle(key->poll_hotkey.action_handle, - config_entry[method], &tmp_handle); - if (ACPI_FAILURE(status)) - goto do_fail_zero; - key->poll_hotkey.poll_result = - kmalloc(sizeof(union acpi_object), GFP_KERNEL); - if (!key->poll_hotkey.poll_result) - goto do_fail_zero; - return AE_OK; - -do_fail_zero: - key->poll_hotkey.poll_method = NULL; - key->poll_hotkey.action_method = NULL; -do_fail: - return -ENODEV; -} - -static int hotkey_open_config(struct inode *inode, struct file *file) -{ - return (single_open - (file, hotkey_config_seq_show, PDE(inode)->data)); -} - -static int hotkey_poll_open_config(struct inode *inode, struct file *file) -{ - return (single_open - (file, hotkey_poll_config_seq_show, PDE(inode)->data)); -} - -static int hotkey_config_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_hotkey_list *hotkey_list = &global_hotkey_list; - struct list_head *entries; - char bus_name[ACPI_PATHNAME_MAX] = { 0 }; - char action_name[ACPI_PATHNAME_MAX] = { 0 }; - struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name }; - struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name }; - - - list_for_each(entries, hotkey_list->entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) { - acpi_get_name(key->event_hotkey.bus_handle, - ACPI_NAME_TYPE_MAX, &bus); - acpi_get_name(key->event_hotkey.action_handle, - ACPI_NAME_TYPE_MAX, &act); - seq_printf(seq, "%s:%s:%s:%d:%d\n", bus_name, - action_name, - key->event_hotkey.action_method, - key->link.hotkey_standard_num, - key->event_hotkey.external_hotkey_num); - } - } - seq_puts(seq, "\n"); - return 0; -} - -static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_hotkey_list *hotkey_list = &global_hotkey_list; - struct list_head *entries; - char bus_name[ACPI_PATHNAME_MAX] = { 0 }; - char action_name[ACPI_PATHNAME_MAX] = { 0 }; - struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name }; - struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name }; - - - list_for_each(entries, hotkey_list->entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - if (key->link.hotkey_type == ACPI_HOTKEY_POLLING) { - acpi_get_name(key->poll_hotkey.poll_handle, - ACPI_NAME_TYPE_MAX, &bus); - acpi_get_name(key->poll_hotkey.action_handle, - ACPI_NAME_TYPE_MAX, &act); - seq_printf(seq, "%s:%s:%s:%s:%d\n", bus_name, - key->poll_hotkey.poll_method, - action_name, - key->poll_hotkey.action_method, - key->link.hotkey_standard_num); - } - } - seq_puts(seq, "\n"); - return 0; -} - -static int -get_parms(char *config_record, int *cmd, char **config_entry, - int *internal_event_num, int *external_event_num) -{ -/* the format of *config_record = - * "1:\d+:*" : "cmd:internal_event_num" - * "\d+:\w+:\w+:\w+:\w+:\d+:\d+" : - * "cmd:bus_handle:bus_method:action_handle:method:internal_event_num:external_event_num" - */ - char *tmp, *tmp1, count; - int i; - - sscanf(config_record, "%d", cmd); - if (*cmd == 1) { - if (sscanf(config_record, "%d:%d", cmd, internal_event_num) != - 2) - goto do_fail; - else - return (6); - } - tmp = strchr(config_record, ':'); - if (!tmp) - goto do_fail; - tmp++; - for (i = 0; i < LAST_CONF_ENTRY; i++) { - tmp1 = strchr(tmp, ':'); - if (!tmp1) { - goto do_fail; - } - count = tmp1 - tmp; - config_entry[i] = kzalloc(count + 1, GFP_KERNEL); - if (!config_entry[i]) - goto handle_failure; - strncpy(config_entry[i], tmp, count); - tmp = tmp1 + 1; - } - if (sscanf(tmp, "%d:%d", internal_event_num, external_event_num) <= 0) - goto handle_failure; - if (!IS_OTHERS(*internal_event_num)) { - return 6; - } -handle_failure: - while (i-- > 0) - kfree(config_entry[i]); -do_fail: - return -1; -} - -/* count is length for one input record */ -static ssize_t hotkey_write_config(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - char *config_record = NULL; - char *config_entry[LAST_CONF_ENTRY]; - int cmd, internal_event_num, external_event_num; - int ret = 0; - union acpi_hotkey *key = kzalloc(sizeof(union acpi_hotkey), GFP_KERNEL); - - if (!key) - return -ENOMEM; - - config_record = kzalloc(count + 1, GFP_KERNEL); - if (!config_record) { - kfree(key); - return -ENOMEM; - } - - if (copy_from_user(config_record, buffer, count)) { - kfree(config_record); - kfree(key); - printk(KERN_ERR PREFIX "Invalid data\n"); - return -EINVAL; - } - ret = get_parms(config_record, &cmd, config_entry, - &internal_event_num, &external_event_num); - kfree(config_record); - if (ret != 6) { - printk(KERN_ERR PREFIX "Invalid data format ret=%d\n", ret); - return -EINVAL; - } - - if (cmd == 1) { - union acpi_hotkey *tmp = NULL; - tmp = get_hotkey_by_event(&global_hotkey_list, - internal_event_num); - if (!tmp) - printk(KERN_ERR PREFIX "Invalid key\n"); - else - memcpy(key, tmp, sizeof(union acpi_hotkey)); - goto cont_cmd; - } - if (IS_EVENT(internal_event_num)) { - if (init_hotkey_device(key, config_entry, - internal_event_num, external_event_num)) - goto init_hotkey_fail; - } else { - if (init_poll_hotkey_device(key, config_entry, - internal_event_num)) - goto init_poll_hotkey_fail; - } -cont_cmd: - switch (cmd) { - case 0: - if (get_hotkey_by_event(&global_hotkey_list, - key->link.hotkey_standard_num)) - goto fail_out; - else - hotkey_add(key); - break; - case 1: - hotkey_remove(key); - break; - case 2: - /* key is kfree()ed if matched*/ - if (hotkey_update(key)) - goto fail_out; - break; - default: - goto fail_out; - break; - } - return count; - -init_poll_hotkey_fail: /* failed init_poll_hotkey_device */ - kfree(config_entry[bus_method]); - config_entry[bus_method] = NULL; -init_hotkey_fail: /* failed init_hotkey_device */ - kfree(config_entry[method]); -fail_out: - kfree(config_entry[bus_handle]); - kfree(config_entry[action_handle]); - /* No double free since elements =NULL for error cases */ - if (IS_EVENT(internal_event_num)) { - if (config_entry[bus_method]) - kfree(config_entry[bus_method]); - free_hotkey_buffer(key); /* frees [method] */ - } else - free_poll_hotkey_buffer(key); /* frees [bus_method]+[method] */ - kfree(key); - printk(KERN_ERR PREFIX "invalid key\n"); - return -EINVAL; -} - -/* - * This function evaluates an ACPI method, given an int as parameter, the - * method is searched within the scope of the handle, can be NULL. The output - * of the method is written is output, which can also be NULL - * - * returns 1 if write is successful, 0 else. - */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) -{ - struct acpi_object_list params; /* list of input parameters (an int here) */ - union acpi_object in_obj; /* the only param we use */ - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = val; - - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - - return (status == AE_OK); -} - -static int read_acpi_int(acpi_handle handle, const char *method, - union acpi_object *val) -{ - struct acpi_buffer output; - union acpi_object out_obj; - acpi_status status; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = acpi_evaluate_object(handle, (char *)method, NULL, &output); - if (val) { - val->integer.value = out_obj.integer.value; - val->type = out_obj.type; - } else - printk(KERN_ERR PREFIX "null val pointer\n"); - return ((status == AE_OK) - && (out_obj.type == ACPI_TYPE_INTEGER)); -} - -static union acpi_hotkey *get_hotkey_by_event(struct - acpi_hotkey_list - *hotkey_list, int event) -{ - struct list_head *entries; - - list_for_each(entries, hotkey_list->entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - if (key->link.hotkey_standard_num == event) { - return (key); - } - } - return (NULL); -} - -/* - * user call AML method interface: - * Call convention: - * echo "event_num: arg type : value" - * example: echo "1:1:30" > /proc/acpi/action - * Just support 1 integer arg passing to AML method - */ - -static ssize_t hotkey_execute_aml_method(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - struct acpi_hotkey_list *hotkey_list = &global_hotkey_list; - char *arg; - int event, method_type, type, value; - union acpi_hotkey *key; - - - arg = kzalloc(count + 1, GFP_KERNEL); - if (!arg) - return -ENOMEM; - - if (copy_from_user(arg, buffer, count)) { - kfree(arg); - printk(KERN_ERR PREFIX "Invalid argument 2\n"); - return -EINVAL; - } - - if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) != - 4) { - kfree(arg); - printk(KERN_ERR PREFIX "Invalid argument 3\n"); - return -EINVAL; - } - kfree(arg); - if (type == ACPI_TYPE_INTEGER) { - key = get_hotkey_by_event(hotkey_list, event); - if (!key) - goto do_fail; - if (IS_EVENT(event)) - write_acpi_int(key->event_hotkey.action_handle, - key->event_hotkey.action_method, value, - NULL); - else if (IS_POLL(event)) { - if (method_type == POLL_METHOD) - read_acpi_int(key->poll_hotkey.poll_handle, - key->poll_hotkey.poll_method, - key->poll_hotkey.poll_result); - else if (method_type == ACTION_METHOD) - write_acpi_int(key->poll_hotkey.action_handle, - key->poll_hotkey.action_method, - value, NULL); - else - goto do_fail; - - } - } else { - printk(KERN_WARNING "Not supported\n"); - return -EINVAL; - } - return count; - do_fail: - return -EINVAL; - -} - -static int __init hotkey_init(void) -{ - int result; - mode_t mode = S_IFREG | S_IRUGO | S_IWUGO; - - - if (acpi_disabled) - return -ENODEV; - - if (acpi_specific_hotkey_enabled) { - printk("Using specific hotkey driver\n"); - return -ENODEV; - } - - hotkey_proc_dir = proc_mkdir(HOTKEY_PROC, acpi_root_dir); - if (!hotkey_proc_dir) { - return (-ENODEV); - } - hotkey_proc_dir->owner = THIS_MODULE; - - hotkey_config = - create_proc_entry(HOTKEY_EV_CONFIG, mode, hotkey_proc_dir); - if (!hotkey_config) { - goto do_fail1; - } else { - hotkey_config->proc_fops = &hotkey_config_fops; - hotkey_config->data = &global_hotkey_list; - hotkey_config->owner = THIS_MODULE; - hotkey_config->uid = 0; - hotkey_config->gid = 0; - } - - hotkey_poll_config = - create_proc_entry(HOTKEY_PL_CONFIG, mode, hotkey_proc_dir); - if (!hotkey_poll_config) { - goto do_fail2; - } else { - hotkey_poll_config->proc_fops = &hotkey_poll_config_fops; - hotkey_poll_config->data = &global_hotkey_list; - hotkey_poll_config->owner = THIS_MODULE; - hotkey_poll_config->uid = 0; - hotkey_poll_config->gid = 0; - } - - hotkey_action = create_proc_entry(HOTKEY_ACTION, mode, hotkey_proc_dir); - if (!hotkey_action) { - goto do_fail3; - } else { - hotkey_action->proc_fops = &hotkey_action_fops; - hotkey_action->owner = THIS_MODULE; - hotkey_action->uid = 0; - hotkey_action->gid = 0; - } - - hotkey_info = create_proc_entry(HOTKEY_INFO, mode, hotkey_proc_dir); - if (!hotkey_info) { - goto do_fail4; - } else { - hotkey_info->proc_fops = &hotkey_info_fops; - hotkey_info->owner = THIS_MODULE; - hotkey_info->uid = 0; - hotkey_info->gid = 0; - } - - result = acpi_bus_register_driver(&hotkey_driver); - if (result < 0) - goto do_fail5; - global_hotkey_list.count = 0; - global_hotkey_list.entries = &hotkey_entries; - - INIT_LIST_HEAD(&hotkey_entries); - - return (0); - - do_fail5: - remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir); - do_fail4: - remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir); - do_fail3: - remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir); - do_fail2: - remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir); - do_fail1: - remove_proc_entry(HOTKEY_PROC, acpi_root_dir); - return (-ENODEV); -} - -static void __exit hotkey_exit(void) -{ - struct list_head *entries, *next; - - - list_for_each_safe(entries, next, global_hotkey_list.entries) { - union acpi_hotkey *key = - container_of(entries, union acpi_hotkey, entries); - - acpi_os_wait_events_complete(NULL); - list_del(&key->link.entries); - global_hotkey_list.count--; - free_hotkey_device(key); - } - acpi_bus_unregister_driver(&hotkey_driver); - remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir); - remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir); - remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir); - remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir); - remove_proc_entry(HOTKEY_PROC, acpi_root_dir); - return; -} - -module_init(hotkey_init); -module_exit(hotkey_exit); diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index c6144ca66638..4def52ca69e5 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -2696,11 +2696,6 @@ static int __init acpi_ibm_init(void) if (acpi_disabled) return -ENODEV; - if (!acpi_specific_hotkey_enabled) { - printk(IBM_ERR "using generic hotkey driver\n"); - return -ENODEV; - } - /* ec is required because many other handles are relative to it */ IBM_HANDLE_INIT(ec); if (!ec_handle) { diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 0f6f3bcbc8eb..368e111100bd 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -68,9 +68,6 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER */ -int acpi_specific_hotkey_enabled = TRUE; -EXPORT_SYMBOL(acpi_specific_hotkey_enabled); - static unsigned int acpi_irq_irq; static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; @@ -1012,14 +1009,6 @@ static int __init acpi_wake_gpes_always_on_setup(char *str) __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup); -static int __init acpi_hotkey_setup(char *str) -{ - acpi_specific_hotkey_enabled = FALSE; - return 1; -} - -__setup("acpi_generic_hotkey", acpi_hotkey_setup); - /* * max_cstate is defined in the base kernel so modules can * change it w/o depending on the state of the processor module. diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index d9b651ffcdc0..56ec5503a124 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -561,10 +561,6 @@ static int __init toshiba_acpi_init(void) if (acpi_disabled) return -ENODEV; - if (!acpi_specific_hotkey_enabled) { - printk(MY_INFO "Using generic hotkey driver\n"); - return -ENODEV; - } /* simple device detection: look for HCI method */ if (is_valid_acpi_path(METHOD_HCI_1)) method_hci = METHOD_HCI_1; diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index 861c39935f99..e4e2b707a353 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1088,11 +1088,6 @@ static int __init asus_laptop_init(void) if (acpi_disabled) return -ENODEV; - if (!acpi_specific_hotkey_enabled) { - printk(ASUS_ERR "Using generic hotkey driver\n"); - return -ENODEV; - } - result = acpi_bus_register_driver(&asus_hotk_driver); if (result < 0) return result; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 4dc8a5043ef0..0e21efb6f649 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -105,12 +105,6 @@ int acpi_ec_ecdt_probe(void); int acpi_processor_set_thermal_limit(acpi_handle handle, int type); -/* -------------------------------------------------------------------------- - Hot Keys - -------------------------------------------------------------------------- */ - -extern int acpi_specific_hotkey_enabled; - /*-------------------------------------------------------------------------- Dock Station -------------------------------------------------------------------------- */ -- cgit From dfcba200679dc3f62212154b65b40b835ce69ab7 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 8 Feb 2007 00:06:32 +0000 Subject: backlight: Remove unneeded owner field Remove uneeded owner field from backlight_properties structure. Nothing uses it and it is unlikely that it will ever be used. The backlight class uses other means to ensure that nothing references unloaded code. Based on a patch from Dmitry Torokhov Signed-off-by: Richard Purdie --- drivers/acpi/asus_acpi.c | 1 - drivers/acpi/ibm_acpi.c | 1 - drivers/acpi/toshiba_acpi.c | 1 - drivers/acpi/video.c | 1 - drivers/macintosh/via-pmu-backlight.c | 1 - drivers/misc/asus-laptop.c | 1 - drivers/misc/msi-laptop.c | 1 - drivers/misc/sony-laptop.c | 1 - drivers/usb/misc/appledisplay.c | 1 - drivers/video/aty/aty128fb.c | 1 - drivers/video/aty/atyfb_base.c | 1 - drivers/video/aty/radeon_backlight.c | 1 - drivers/video/backlight/corgi_bl.c | 1 - drivers/video/backlight/hp680_bl.c | 1 - drivers/video/backlight/locomolcd.c | 1 - drivers/video/backlight/progear_bl.c | 1 - drivers/video/nvidia/nv_backlight.c | 1 - drivers/video/riva/fbdev.c | 1 - include/linux/backlight.h | 3 --- include/linux/lcd.h | 2 -- 20 files changed, 23 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index 772299fb5f9d..906c54f9ba50 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -1353,7 +1353,6 @@ static int asus_hotk_remove(struct acpi_device *device, int type) } static struct backlight_properties asus_backlight_data = { - .owner = THIS_MODULE, .get_brightness = read_brightness, .update_status = set_brightness_status, .max_brightness = 15, diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 1a0ed3dc409c..accf4f7da889 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -1705,7 +1705,6 @@ static int brightness_update_status(struct backlight_device *bd) } static struct backlight_properties ibm_backlight_data = { - .owner = THIS_MODULE, .get_brightness = brightness_get, .update_status = brightness_update_status, .max_brightness = 7, diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index faf8a5232d8e..efc3669a84e8 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -534,7 +534,6 @@ static acpi_status __exit remove_device(void) } static struct backlight_properties toshiba_backlight_data = { - .owner = THIS_MODULE, .get_brightness = get_lcd, .update_status = set_lcd_status, .max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1, diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bf525cca3b63..75e422bd926a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -621,7 +621,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) kfree(name); return; } - acpi_video_data->owner = THIS_MODULE; acpi_video_data->get_brightness = acpi_video_get_brightness; acpi_video_data->update_status = diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index 801a974342f9..db8bcc35bc03 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -111,7 +111,6 @@ static int pmu_backlight_get_brightness(struct backlight_device *bd) } static struct backlight_properties pmu_backlight_data = { - .owner = THIS_MODULE, .get_brightness = pmu_backlight_get_brightness, .update_status = pmu_backlight_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index e4e2b707a353..d15ee5e34201 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -196,7 +196,6 @@ static struct backlight_device *asus_backlight_device; static int read_brightness(struct backlight_device *bd); static int update_bl_status(struct backlight_device *bd); static struct backlight_properties asusbl_data = { - .owner = THIS_MODULE, .get_brightness = read_brightness, .update_status = update_bl_status, .max_brightness = 15, diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index 8e5e07e4c1cf..dd4d92e031b7 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -161,7 +161,6 @@ static int bl_update_status(struct backlight_device *b) } static struct backlight_properties msibl_props = { - .owner = THIS_MODULE, .get_brightness = bl_get_brightness, .update_status = bl_update_status, .max_brightness = MSI_LCD_LEVEL_MAX-1, diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index cabbed0015e4..03d02bd9f122 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -399,7 +399,6 @@ static int sony_backlight_get_brightness(struct backlight_device *bd) static struct backlight_device *sony_backlight_device; static struct backlight_properties sony_backlight_properties = { - .owner = THIS_MODULE, .update_status = sony_backlight_update_status, .get_brightness = sony_backlight_get_brightness, .max_brightness = SONY_MAX_BRIGHTNESS - 1, diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index e573c8ba9785..416cde5893af 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -178,7 +178,6 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties appledisplay_bl_data = { - .owner = THIS_MODULE, .get_brightness = appledisplay_bl_get_brightness, .update_status = appledisplay_bl_update_status, .max_brightness = 0xFF diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index 2e976ffcde0f..1fa211c0d7bb 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1797,7 +1797,6 @@ static int aty128_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties aty128_bl_data = { - .owner = THIS_MODULE, .get_brightness = aty128_bl_get_brightness, .update_status = aty128_bl_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 301612cef354..5ea5a00e58a3 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2178,7 +2178,6 @@ static int aty_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties aty_bl_data = { - .owner = THIS_MODULE, .get_brightness = aty_bl_get_brightness, .update_status = aty_bl_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index 3abfd4a380cc..8b66df6f199a 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -134,7 +134,6 @@ static int radeon_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties radeon_bl_data = { - .owner = THIS_MODULE, .get_brightness = radeon_bl_get_brightness, .update_status = radeon_bl_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index fde1d9518123..4ca24e261578 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -106,7 +106,6 @@ EXPORT_SYMBOL(corgibl_limit_intensity); static struct backlight_properties corgibl_data = { - .owner = THIS_MODULE, .get_brightness = corgibl_get_intensity, .update_status = corgibl_set_intensity, }; diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index c07d8207fb54..074625a46e3d 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -96,7 +96,6 @@ static int hp680bl_get_intensity(struct backlight_device *bd) } static struct backlight_properties hp680bl_data = { - .owner = THIS_MODULE, .max_brightness = HP680_MAX_INTENSITY, .get_brightness = hp680bl_get_intensity, .update_status = hp680bl_set_intensity, diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index fc812d96c31d..3c5abbf0d042 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -142,7 +142,6 @@ static int locomolcd_get_intensity(struct backlight_device *bd) } static struct backlight_properties locomobl_data = { - .owner = THIS_MODULE, .get_brightness = locomolcd_get_intensity, .update_status = locomolcd_set_intensity, .max_brightness = 4, diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c index 13d831da8d96..42d6acd96c1a 100644 --- a/drivers/video/backlight/progear_bl.c +++ b/drivers/video/backlight/progear_bl.c @@ -56,7 +56,6 @@ static int progearbl_get_intensity(struct backlight_device *bd) } static struct backlight_properties progearbl_data = { - .owner = THIS_MODULE, .get_brightness = progearbl_get_intensity, .update_status = progearbl_set_intensity, }; diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c index df934bd21899..4254c090dc4b 100644 --- a/drivers/video/nvidia/nv_backlight.c +++ b/drivers/video/nvidia/nv_backlight.c @@ -104,7 +104,6 @@ static int nvidia_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties nvidia_bl_data = { - .owner = THIS_MODULE, .get_brightness = nvidia_bl_get_brightness, .update_status = nvidia_bl_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index f2e9b742c92f..fd825711bb63 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -347,7 +347,6 @@ static int riva_bl_get_brightness(struct backlight_device *bd) } static struct backlight_properties riva_bl_data = { - .owner = THIS_MODULE, .get_brightness = riva_bl_get_brightness, .update_status = riva_bl_update_status, .max_brightness = (FB_BACKLIGHT_LEVELS - 1), diff --git a/include/linux/backlight.h b/include/linux/backlight.h index a5cf1beacb44..287c62d956f2 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -17,9 +17,6 @@ struct fb_info; /* This structure defines all the properties of a backlight (usually attached to a LCD). */ struct backlight_properties { - /* Owner module */ - struct module *owner; - /* Notify the backlight driver some property has changed */ int (*update_status)(struct backlight_device *); /* Return the current backlight brightness (accounting for power, diff --git a/include/linux/lcd.h b/include/linux/lcd.h index d739b2e7eac2..8a468f168c45 100644 --- a/include/linux/lcd.h +++ b/include/linux/lcd.h @@ -16,8 +16,6 @@ struct fb_info; /* This structure defines all the properties of a LCD flat panel. */ struct lcd_properties { - /* Owner module */ - struct module *owner; /* Get the LCD panel power status (0: full on, 1..3: controller power on, flat panel power off, 4: full off), see FB_BLANK_XXX */ int (*get_power)(struct lcd_device *); -- cgit From 599a52d12629394236d785615808845823875868 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 10 Feb 2007 23:07:48 +0000 Subject: backlight: Separate backlight properties from backlight ops pointers Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: Richard Purdie --- arch/powerpc/kernel/traps.c | 2 +- arch/powerpc/platforms/powermac/backlight.c | 8 +-- drivers/acpi/asus_acpi.c | 6 +-- drivers/acpi/ibm_acpi.c | 7 +-- drivers/acpi/toshiba_acpi.c | 6 +-- drivers/acpi/video.c | 35 +++++-------- drivers/macintosh/via-pmu-backlight.c | 23 +++++---- drivers/misc/asus-laptop.c | 16 +++--- drivers/misc/msi-laptop.c | 9 ++-- drivers/usb/misc/appledisplay.c | 11 ++-- drivers/video/aty/aty128fb.c | 20 ++++---- drivers/video/aty/atyfb_base.c | 18 +++---- drivers/video/aty/radeon_backlight.c | 18 +++---- drivers/video/backlight/backlight.c | 79 +++++++++++------------------ drivers/video/backlight/corgi_bl.c | 16 +++--- drivers/video/backlight/hp680_bl.c | 14 ++--- drivers/video/backlight/lcd.c | 67 +++++++++++------------- drivers/video/backlight/locomolcd.c | 12 ++--- drivers/video/backlight/progear_bl.c | 16 +++--- drivers/video/chipsfb.c | 2 +- drivers/video/nvidia/nv_backlight.c | 18 +++---- drivers/video/riva/fbdev.c | 18 +++---- include/linux/backlight.h | 33 +++++++----- include/linux/lcd.h | 23 +++++---- 24 files changed, 223 insertions(+), 254 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 35ce07b6a5bc..17724fb2067f 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -107,7 +107,7 @@ int die(const char *str, struct pt_regs *regs, long err) if (machine_is(powermac) && pmac_backlight) { struct backlight_properties *props; - props = pmac_backlight->props; + props = &pmac_backlight->props; props->brightness = props->max_brightness; props->power = FB_BLANK_UNBLANK; backlight_update_status(pmac_backlight); diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index 1be358c1448a..de7440e62cc4 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -44,7 +44,7 @@ DEFINE_MUTEX(pmac_backlight_mutex); /* Main backlight storage * - * Backlight drivers in this variable are required to have the "props" + * Backlight drivers in this variable are required to have the "ops" * attribute set and to have an update_status function. * * We can only store one backlight here, but since Apple laptops have only one @@ -103,7 +103,7 @@ static void pmac_backlight_key_worker(struct work_struct *work) struct backlight_properties *props; int brightness; - props = pmac_backlight->props; + props = &pmac_backlight->props; brightness = props->brightness + ((pmac_backlight_key_queued?-1:1) * @@ -141,7 +141,7 @@ static int __pmac_backlight_set_legacy_brightness(int brightness) if (pmac_backlight) { struct backlight_properties *props; - props = pmac_backlight->props; + props = &pmac_backlight->props; props->brightness = brightness * (props->max_brightness + 1) / (OLD_BACKLIGHT_MAX + 1); @@ -190,7 +190,7 @@ int pmac_backlight_get_legacy_brightness() if (pmac_backlight) { struct backlight_properties *props; - props = pmac_backlight->props; + props = &pmac_backlight->props; result = props->brightness * (OLD_BACKLIGHT_MAX + 1) / diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index 906c54f9ba50..b770deab968c 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -848,7 +848,7 @@ out: static int set_brightness_status(struct backlight_device *bd) { - return set_brightness(bd->props->brightness); + return set_brightness(bd->props.brightness); } static int @@ -1352,10 +1352,9 @@ static int asus_hotk_remove(struct acpi_device *device, int type) return 0; } -static struct backlight_properties asus_backlight_data = { +static struct backlight_ops asus_backlight_data = { .get_brightness = read_brightness, .update_status = set_brightness_status, - .max_brightness = 15, }; static void __exit asus_acpi_exit(void) @@ -1409,6 +1408,7 @@ static int __init asus_acpi_init(void) asus_backlight_device = NULL; asus_acpi_exit(); } + asus_backlight_device->props.max_brightness = 15; return 0; } diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index accf4f7da889..4cc534e36e81 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -1701,13 +1701,12 @@ static int brightness_write(char *buf) static int brightness_update_status(struct backlight_device *bd) { - return brightness_set(bd->props->brightness); + return brightness_set(bd->props.brightness); } -static struct backlight_properties ibm_backlight_data = { +static struct backlight_ops ibm_backlight_data = { .get_brightness = brightness_get, .update_status = brightness_update_status, - .max_brightness = 7, }; static int brightness_init(void) @@ -1719,6 +1718,8 @@ static int brightness_init(void) return PTR_ERR(ibm_backlight_device); } + ibm_backlight_device->props.max_brightness = 7; + return 0; } diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index efc3669a84e8..3906d47b9783 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -315,7 +315,7 @@ static int set_lcd(int value) static int set_lcd_status(struct backlight_device *bd) { - return set_lcd(bd->props->brightness); + return set_lcd(bd->props.brightness); } static unsigned long write_lcd(const char *buffer, unsigned long count) @@ -533,10 +533,9 @@ static acpi_status __exit remove_device(void) return AE_OK; } -static struct backlight_properties toshiba_backlight_data = { +static struct backlight_ops toshiba_backlight_data = { .get_brightness = get_lcd, .update_status = set_lcd_status, - .max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1, }; static void __exit toshiba_acpi_exit(void) @@ -596,6 +595,7 @@ static int __init toshiba_acpi_init(void) toshiba_backlight_device = NULL; toshiba_acpi_exit(); } + toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; return (ACPI_SUCCESS(status)) ? 0 : -ENODEV; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 75e422bd926a..0771b434feb2 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -169,7 +169,6 @@ struct acpi_video_device { struct acpi_device *dev; struct acpi_video_device_brightness *brightness; struct backlight_device *backlight; - struct backlight_properties *data; }; /* bus */ @@ -286,13 +285,18 @@ static int acpi_video_get_brightness(struct backlight_device *bd) static int acpi_video_set_brightness(struct backlight_device *bd) { - int request_level = bd->props->brightness; + int request_level = bd->props.brightness; struct acpi_video_device *vd = (struct acpi_video_device *)class_get_devdata(&bd->class_dev); acpi_video_device_lcd_set_level(vd, request_level); return 0; } +static struct backlight_ops acpi_backlight_ops = { + .get_brightness = acpi_video_get_brightness, + .update_status = acpi_video_set_brightness, +}; + /* -------------------------------------------------------------------------- Video Management -------------------------------------------------------------------------- */ @@ -608,30 +612,18 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) unsigned long tmp; static int count = 0; char *name; - struct backlight_properties *acpi_video_data; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); if (!name) return; - acpi_video_data = kzalloc( - sizeof(struct backlight_properties), - GFP_KERNEL); - if (!acpi_video_data){ - kfree(name); - return; - } - acpi_video_data->get_brightness = - acpi_video_get_brightness; - acpi_video_data->update_status = - acpi_video_set_brightness; sprintf(name, "acpi_video%d", count++); - device->data = acpi_video_data; - acpi_video_data->max_brightness = max_level; acpi_video_device_lcd_get_level_current(device, &tmp); - acpi_video_data->brightness = (int)tmp; device->backlight = backlight_device_register(name, - NULL, device, acpi_video_data); + NULL, device, &acpi_backlight_ops); + device->backlight->props.max_brightness = max_level; + device->backlight->props.brightness = (int)tmp; + backlight_update_status(device->backlight); + kfree(name); } return; @@ -1676,10 +1668,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) status = acpi_remove_notify_handler(device->dev->handle, ACPI_DEVICE_NOTIFY, acpi_video_device_notify); - if (device->backlight){ - backlight_device_unregister(device->backlight); - kfree(device->data); - } + backlight_device_unregister(device->backlight); return 0; } diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index 9f9d03127978..7e27071746e4 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -15,7 +15,7 @@ #define MAX_PMU_LEVEL 0xFF -static struct backlight_properties pmu_backlight_data; +static struct backlight_ops pmu_backlight_data; static DEFINE_SPINLOCK(pmu_backlight_lock); static int sleeping; static u8 bl_curve[FB_BACKLIGHT_LEVELS]; @@ -72,7 +72,7 @@ static int pmu_backlight_update_status(struct backlight_device *bd) { struct adb_request req; unsigned long flags; - int level = bd->props->brightness; + int level = bd->props.brightness; spin_lock_irqsave(&pmu_backlight_lock, flags); @@ -80,8 +80,8 @@ static int pmu_backlight_update_status(struct backlight_device *bd) if (sleeping) goto out; - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK) level = 0; if (level > 0) { @@ -107,13 +107,13 @@ out: static int pmu_backlight_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties pmu_backlight_data = { +static struct backlight_ops pmu_backlight_data = { .get_brightness = pmu_backlight_get_brightness, .update_status = pmu_backlight_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), + }; #ifdef CONFIG_PM @@ -151,9 +151,10 @@ void __init pmu_backlight_init() printk("pmubl: Backlight registration failed\n"); goto error; } + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; pmu_backlight_init_curve(0x7F, 0x46, 0x0E); - level = pmu_backlight_data.max_brightness; + level = bd->props.max_brightness; if (autosave) { /* read autosaved value if available */ @@ -163,11 +164,11 @@ void __init pmu_backlight_init() level = pmu_backlight_curve_lookup( (req.reply[0] >> 4) * - pmu_backlight_data.max_brightness / 15); + bd->props.max_brightness / 15); } - bd->props->brightness = level; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.brightness = level; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("pmubl: Backlight initialized (%s)\n", name); diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index 7ace5b9a3d28..295e931c0dfb 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -195,10 +195,9 @@ static struct backlight_device *asus_backlight_device; */ static int read_brightness(struct backlight_device *bd); static int update_bl_status(struct backlight_device *bd); -static struct backlight_properties asusbl_data = { +static struct backlight_ops asusbl_ops = { .get_brightness = read_brightness, .update_status = update_bl_status, - .max_brightness = 15, }; /* These functions actually update the LED's, and are called from a @@ -348,7 +347,7 @@ static void lcd_blank(int blank) struct backlight_device *bd = asus_backlight_device; if (bd) { - bd->props->power = blank; + bd->props.power = blank; backlight_update_status(bd); } } @@ -381,13 +380,13 @@ static int set_brightness(struct backlight_device *bd, int value) static int update_bl_status(struct backlight_device *bd) { int rv; - int value = bd->props->brightness; + int value = bd->props.brightness; rv = set_brightness(bd, value); if (rv) return rv; - value = (bd->props->power == FB_BLANK_UNBLANK) ? 1 : 0; + value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0; return set_lcd_state(value); } @@ -1013,7 +1012,7 @@ static int asus_backlight_init(struct device *dev) if (brightness_set_handle && lcd_switch_handle) { bd = backlight_device_register(ASUS_HOTK_FILE, dev, - NULL, &asusbl_data); + NULL, &asusbl_ops); if (IS_ERR(bd)) { printk(ASUS_ERR "Could not register asus backlight device\n"); @@ -1023,8 +1022,9 @@ static int asus_backlight_init(struct device *dev) asus_backlight_device = bd; - bd->props->brightness = read_brightness(NULL); - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = 15; + bd->props.brightness = read_brightness(NULL); + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); } return 0; diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index dd4d92e031b7..68c4b58525ba 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -157,13 +157,12 @@ static int bl_get_brightness(struct backlight_device *b) static int bl_update_status(struct backlight_device *b) { - return set_lcd_level(b->props->brightness); + return set_lcd_level(b->props.brightness); } -static struct backlight_properties msibl_props = { +static struct backlight_ops msibl_ops = { .get_brightness = bl_get_brightness, .update_status = bl_update_status, - .max_brightness = MSI_LCD_LEVEL_MAX-1, }; static struct backlight_device *msibl_device; @@ -317,10 +316,12 @@ static int __init msi_init(void) /* Register backlight stuff */ msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_props); + &msibl_ops); if (IS_ERR(msibl_device)) return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1, + ret = platform_driver_register(&msipf_driver); if (ret) goto fail_backlight; diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index cd2c5574cf93..cf70c16f0e3f 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -141,7 +141,7 @@ static int appledisplay_bl_update_status(struct backlight_device *bd) int retval; pdata->msgdata[0] = 0x10; - pdata->msgdata[1] = bd->props->brightness; + pdata->msgdata[1] = bd->props.brightness; retval = usb_control_msg( pdata->udev, @@ -177,10 +177,9 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) return pdata->msgdata[1]; } -static struct backlight_properties appledisplay_bl_data = { +static struct backlight_ops appledisplay_bl_data = { .get_brightness = appledisplay_bl_get_brightness, .update_status = appledisplay_bl_update_status, - .max_brightness = 0xFF }; static void appledisplay_work(struct work_struct *work) @@ -191,7 +190,7 @@ static void appledisplay_work(struct work_struct *work) retval = appledisplay_bl_get_brightness(pdata->bd); if (retval >= 0) - pdata->bd->props->brightness = retval; + pdata->bd->props.brightness = retval; /* Poll again in about 125ms if there's still a button pressed */ if (pdata->button_pressed) @@ -285,6 +284,8 @@ static int appledisplay_probe(struct usb_interface *iface, goto error; } + pdata->bd->props.max_brightness = 0xff; + /* Try to get brightness */ brightness = appledisplay_bl_get_brightness(pdata->bd); @@ -295,7 +296,7 @@ static int appledisplay_probe(struct usb_interface *iface, } /* Set brightness in backlight device */ - pdata->bd->props->brightness = brightness; + pdata->bd->props.brightness = brightness; /* save our data pointer in the interface device */ usb_set_intfdata(iface, pdata); diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index 4de8d6252c3c..8726c3669713 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1695,8 +1695,6 @@ static int __devinit aty128fb_setup(char *options) #ifdef CONFIG_FB_ATY128_BACKLIGHT #define MAX_LEVEL 0xFF -static struct backlight_properties aty128_bl_data; - static int aty128_bl_get_level_brightness(struct aty128fb_par *par, int level) { @@ -1730,12 +1728,12 @@ static int aty128_bl_update_status(struct backlight_device *bd) unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL); int level; - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK || + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK || !par->lcd_on) level = 0; else - level = bd->props->brightness; + level = bd->props.brightness; reg |= LVDS_BL_MOD_EN | LVDS_BLON; if (level > 0) { @@ -1779,19 +1777,18 @@ static int aty128_bl_update_status(struct backlight_device *bd) static int aty128_bl_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties aty128_bl_data = { +static struct backlight_ops aty128_bl_data = { .get_brightness = aty128_bl_get_brightness, .update_status = aty128_bl_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; static void aty128_bl_set_power(struct fb_info *info, int power) { if (info->bl_dev) { - info->bl_dev->props->power = power; + info->bl_dev->props.power = power; backlight_update_status(info->bl_dev); } } @@ -1825,8 +1822,9 @@ static void aty128_bl_init(struct aty128fb_par *par) 63 * FB_BACKLIGHT_MAX / MAX_LEVEL, 219 * FB_BACKLIGHT_MAX / MAX_LEVEL); - bd->props->brightness = aty128_bl_data.max_brightness; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; + bd->props.brightness = bd->props.max_brightness; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("aty128: Backlight initialized (%s)\n", name); diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 35ba26567598..a7e0062233f2 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2114,8 +2114,6 @@ static int atyfb_pci_resume(struct pci_dev *pdev) #ifdef CONFIG_FB_ATY_BACKLIGHT #define MAX_LEVEL 0xFF -static struct backlight_properties aty_bl_data; - static int aty_bl_get_level_brightness(struct atyfb_par *par, int level) { struct fb_info *info = pci_get_drvdata(par->pdev); @@ -2139,11 +2137,11 @@ static int aty_bl_update_status(struct backlight_device *bd) unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par); int level; - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK) level = 0; else - level = bd->props->brightness; + level = bd->props.brightness; reg |= (BLMOD_EN | BIASMOD_EN); if (level > 0) { @@ -2160,13 +2158,12 @@ static int aty_bl_update_status(struct backlight_device *bd) static int aty_bl_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties aty_bl_data = { +static struct backlight_ops aty_bl_data = { .get_brightness = aty_bl_get_brightness, .update_status = aty_bl_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; static void aty_bl_init(struct atyfb_par *par) @@ -2194,8 +2191,9 @@ static void aty_bl_init(struct atyfb_par *par) 0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL, 0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL); - bd->props->brightness = aty_bl_data.max_brightness; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; + bd->props.brightness = bd->props.max_brightness; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("aty: Backlight initialized (%s)\n", name); diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index 8c775e6a7e03..0be25fa5540c 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -19,8 +19,6 @@ #define MAX_RADEON_LEVEL 0xFF -static struct backlight_properties radeon_bl_data; - struct radeon_bl_privdata { struct radeonfb_info *rinfo; uint8_t negative; @@ -61,11 +59,11 @@ static int radeon_bl_update_status(struct backlight_device *bd) * backlight. This provides some greater power saving and the display * is useless without backlight anyway. */ - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK) level = 0; else - level = bd->props->brightness; + level = bd->props.brightness; del_timer_sync(&rinfo->lvds_timer); radeon_engine_idle(); @@ -126,13 +124,12 @@ static int radeon_bl_update_status(struct backlight_device *bd) static int radeon_bl_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties radeon_bl_data = { +static struct backlight_ops radeon_bl_data = { .get_brightness = radeon_bl_get_brightness, .update_status = radeon_bl_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; void radeonfb_bl_init(struct radeonfb_info *rinfo) @@ -188,8 +185,9 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo) 63 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL, 217 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL); - bd->props->brightness = radeon_bl_data.max_brightness; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; + bd->props.brightness = bd->props.max_brightness; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("radeonfb: Backlight initialized (%s)\n", name); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 822a373d3346..c65e81ff3578 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -35,14 +35,14 @@ static int fb_notifier_callback(struct notifier_block *self, return 0; bd = container_of(self, struct backlight_device, fb_notif); - mutex_lock(&bd->props_lock); - if (bd->props) - if (!bd->props->check_fb || - bd->props->check_fb(evdata->info)) { - bd->props->fb_blank = *(int *)evdata->data; + mutex_lock(&bd->ops_lock); + if (bd->ops) + if (!bd->ops->check_fb || + bd->ops->check_fb(evdata->info)) { + bd->props.fb_blank = *(int *)evdata->data; backlight_update_status(bd); } - mutex_unlock(&bd->props_lock); + mutex_unlock(&bd->ops_lock); return 0; } @@ -71,15 +71,9 @@ static inline void backlight_unregister_fb(struct backlight_device *bd) static ssize_t backlight_show_power(struct class_device *cdev, char *buf) { - int rc = -ENXIO; struct backlight_device *bd = to_backlight_device(cdev); - mutex_lock(&bd->props_lock); - if (bd->props) - rc = sprintf(buf, "%d\n", bd->props->power); - mutex_unlock(&bd->props_lock); - - return rc; + return sprintf(buf, "%d\n", bd->props.power); } static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count) @@ -95,29 +89,23 @@ static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, if (size != count) return -EINVAL; - mutex_lock(&bd->props_lock); - if (bd->props) { + mutex_lock(&bd->ops_lock); + if (bd->ops) { pr_debug("backlight: set power to %d\n", power); - bd->props->power = power; + bd->props.power = power; backlight_update_status(bd); rc = count; } - mutex_unlock(&bd->props_lock); + mutex_unlock(&bd->ops_lock); return rc; } static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf) { - int rc = -ENXIO; struct backlight_device *bd = to_backlight_device(cdev); - mutex_lock(&bd->props_lock); - if (bd->props) - rc = sprintf(buf, "%d\n", bd->props->brightness); - mutex_unlock(&bd->props_lock); - - return rc; + return sprintf(buf, "%d\n", bd->props.brightness); } static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count) @@ -133,34 +121,28 @@ static ssize_t backlight_store_brightness(struct class_device *cdev, const char if (size != count) return -EINVAL; - mutex_lock(&bd->props_lock); - if (bd->props) { - if (brightness > bd->props->max_brightness) + mutex_lock(&bd->ops_lock); + if (bd->ops) { + if (brightness > bd->props.max_brightness) rc = -EINVAL; else { pr_debug("backlight: set brightness to %d\n", brightness); - bd->props->brightness = brightness; + bd->props.brightness = brightness; backlight_update_status(bd); rc = count; } } - mutex_unlock(&bd->props_lock); + mutex_unlock(&bd->ops_lock); return rc; } static ssize_t backlight_show_max_brightness(struct class_device *cdev, char *buf) { - int rc = -ENXIO; struct backlight_device *bd = to_backlight_device(cdev); - mutex_lock(&bd->props_lock); - if (bd->props) - rc = sprintf(buf, "%d\n", bd->props->max_brightness); - mutex_unlock(&bd->props_lock); - - return rc; + return sprintf(buf, "%d\n", bd->props.max_brightness); } static ssize_t backlight_show_actual_brightness(struct class_device *cdev, @@ -169,10 +151,10 @@ static ssize_t backlight_show_actual_brightness(struct class_device *cdev, int rc = -ENXIO; struct backlight_device *bd = to_backlight_device(cdev); - mutex_lock(&bd->props_lock); - if (bd->props && bd->props->get_brightness) - rc = sprintf(buf, "%d\n", bd->props->get_brightness(bd)); - mutex_unlock(&bd->props_lock); + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->get_brightness) + rc = sprintf(buf, "%d\n", bd->ops->get_brightness(bd)); + mutex_unlock(&bd->ops_lock); return rc; } @@ -211,7 +193,7 @@ static const struct class_device_attribute bl_class_device_attributes[] = { * respective framebuffer device). * @devdata: an optional pointer to be stored in the class_device. The * methods may retrieve it by using class_get_devdata(&bd->class_dev). - * @bp: the backlight properties structure. + * @ops: the backlight operations structure. * * Creates and registers new backlight class_device. Returns either an * ERR_PTR() or a pointer to the newly allocated device. @@ -219,21 +201,20 @@ static const struct class_device_attribute bl_class_device_attributes[] = { struct backlight_device *backlight_device_register(const char *name, struct device *dev, void *devdata, - struct backlight_properties *bp) + struct backlight_ops *ops) { int i, rc; struct backlight_device *new_bd; pr_debug("backlight_device_alloc: name=%s\n", name); - new_bd = kmalloc(sizeof(struct backlight_device), GFP_KERNEL); + new_bd = kzalloc(sizeof(struct backlight_device), GFP_KERNEL); if (!new_bd) return ERR_PTR(-ENOMEM); mutex_init(&new_bd->update_lock); - mutex_init(&new_bd->props_lock); - new_bd->props = bp; - memset(&new_bd->class_dev, 0, sizeof(new_bd->class_dev)); + mutex_init(&new_bd->ops_lock); + new_bd->ops = ops; new_bd->class_dev.class = &backlight_class; new_bd->class_dev.dev = dev; strlcpy(new_bd->class_dev.class_id, name, KOBJ_NAME_LEN); @@ -302,9 +283,9 @@ void backlight_device_unregister(struct backlight_device *bd) class_device_remove_file(&bd->class_dev, &bl_class_device_attributes[i]); - mutex_lock(&bd->props_lock); - bd->props = NULL; - mutex_unlock(&bd->props_lock); + mutex_lock(&bd->ops_lock); + bd->ops = NULL; + mutex_unlock(&bd->ops_lock); backlight_unregister_fb(bd); diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index c1eba0e8a1b0..05f36811ac95 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -34,11 +34,11 @@ static unsigned long corgibl_flags; static int corgibl_send_intensity(struct backlight_device *bd) { void (*corgi_kick_batt)(void); - int intensity = bd->props->brightness; + int intensity = bd->props.brightness; - if (bd->props->power != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK) intensity = 0; - if (bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.fb_blank != FB_BLANK_UNBLANK) intensity = 0; if (corgibl_flags & CORGIBL_SUSPENDED) intensity = 0; @@ -103,7 +103,7 @@ void corgibl_limit_intensity(int limit) EXPORT_SYMBOL(corgibl_limit_intensity); -static struct backlight_properties corgibl_data = { +static struct backlight_ops corgibl_ops = { .get_brightness = corgibl_get_intensity, .update_status = corgibl_send_intensity, }; @@ -113,19 +113,19 @@ static int corgibl_probe(struct platform_device *pdev) struct corgibl_machinfo *machinfo = pdev->dev.platform_data; bl_machinfo = machinfo; - corgibl_data.max_brightness = machinfo->max_intensity; if (!machinfo->limit_mask) machinfo->limit_mask = -1; corgi_backlight_device = backlight_device_register ("corgi-bl", - &pdev->dev, NULL, &corgibl_data); + &pdev->dev, NULL, &corgibl_ops); if (IS_ERR (corgi_backlight_device)) return PTR_ERR (corgi_backlight_device); platform_set_drvdata(pdev, corgi_backlight_device); - corgibl_data.power = FB_BLANK_UNBLANK; - corgibl_data.brightness = machinfo->default_intensity; + corgi_backlight_device->props.max_brightness = machinfo->max_intensity; + corgi_backlight_device->props.power = FB_BLANK_UNBLANK; + corgi_backlight_device->props.brightness = machinfo->default_intensity; corgibl_send_intensity(corgi_backlight_device); printk("Corgi Backlight Driver Initialized.\n"); diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index e7444c8f289d..0899fccbd570 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -33,11 +33,11 @@ static void hp680bl_send_intensity(struct backlight_device *bd) { unsigned long flags; u16 v; - int intensity = bd->props->brightness; + int intensity = bd->props.brightness; - if (bd->props->power != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK) intensity = 0; - if (bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.fb_blank != FB_BLANK_UNBLANK) intensity = 0; if (hp680bl_suspended) intensity = 0; @@ -98,8 +98,7 @@ static int hp680bl_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_properties hp680bl_data = { - .max_brightness = HP680_MAX_INTENSITY, +static struct backlight_ops hp680bl_ops = { .get_brightness = hp680bl_get_intensity, .update_status = hp680bl_set_intensity, }; @@ -109,13 +108,14 @@ static int __init hp680bl_probe(struct platform_device *pdev) struct backlight_device *bd; bd = backlight_device_register ("hp680-bl", &pdev->dev, NULL, - &hp680bl_data); + &hp680bl_ops); if (IS_ERR(bd)) return PTR_ERR(bd); platform_set_drvdata(pdev, bd); - bd->props->brightness = HP680_DEFAULT_INTENSITY; + bd->props.max_brightness = HP680_MAX_INTENSITY; + bd->props.brightness = HP680_DEFAULT_INTENSITY; hp680bl_send_intensity(bd); return 0; diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 430ba018a896..6ef8f0a7a137 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -31,11 +31,11 @@ static int fb_notifier_callback(struct notifier_block *self, return 0; ld = container_of(self, struct lcd_device, fb_notif); - mutex_lock(&ld->props_lock); - if (ld->props) - if (!ld->props->check_fb || ld->props->check_fb(evdata->info)) - ld->props->set_power(ld, *(int *)evdata->data); - mutex_unlock(&ld->props_lock); + mutex_lock(&ld->ops_lock); + if (ld->ops) + if (!ld->ops->check_fb || ld->ops->check_fb(evdata->info)) + ld->ops->set_power(ld, *(int *)evdata->data); + mutex_unlock(&ld->ops_lock); return 0; } @@ -66,12 +66,12 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf) int rc; struct lcd_device *ld = to_lcd_device(cdev); - mutex_lock(&ld->props_lock); - if (ld->props && ld->props->get_power) - rc = sprintf(buf, "%d\n", ld->props->get_power(ld)); + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->get_power) + rc = sprintf(buf, "%d\n", ld->ops->get_power(ld)); else rc = -ENXIO; - mutex_unlock(&ld->props_lock); + mutex_unlock(&ld->ops_lock); return rc; } @@ -89,13 +89,13 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_ if (size != count) return -EINVAL; - mutex_lock(&ld->props_lock); - if (ld->props && ld->props->set_power) { + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->set_power) { pr_debug("lcd: set power to %d\n", power); - ld->props->set_power(ld, power); + ld->ops->set_power(ld, power); rc = count; } - mutex_unlock(&ld->props_lock); + mutex_unlock(&ld->ops_lock); return rc; } @@ -105,10 +105,10 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf) int rc = -ENXIO; struct lcd_device *ld = to_lcd_device(cdev); - mutex_lock(&ld->props_lock); - if (ld->props && ld->props->get_contrast) - rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld)); - mutex_unlock(&ld->props_lock); + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->get_contrast) + rc = sprintf(buf, "%d\n", ld->ops->get_contrast(ld)); + mutex_unlock(&ld->ops_lock); return rc; } @@ -126,28 +126,22 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si if (size != count) return -EINVAL; - mutex_lock(&ld->props_lock); - if (ld->props && ld->props->set_contrast) { + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->set_contrast) { pr_debug("lcd: set contrast to %d\n", contrast); - ld->props->set_contrast(ld, contrast); + ld->ops->set_contrast(ld, contrast); rc = count; } - mutex_unlock(&ld->props_lock); + mutex_unlock(&ld->ops_lock); return rc; } static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf) { - int rc = -ENXIO; struct lcd_device *ld = to_lcd_device(cdev); - mutex_lock(&ld->props_lock); - if (ld->props) - rc = sprintf(buf, "%d\n", ld->props->max_contrast); - mutex_unlock(&ld->props_lock); - - return rc; + return sprintf(buf, "%d\n", ld->props.max_contrast); } static void lcd_class_release(struct class_device *dev) @@ -180,27 +174,26 @@ static const struct class_device_attribute lcd_class_device_attributes[] = { * respective framebuffer device). * @devdata: an optional pointer to be stored in the class_device. The * methods may retrieve it by using class_get_devdata(ld->class_dev). - * @lp: the lcd properties structure. + * @ops: the lcd operations structure. * * Creates and registers a new lcd class_device. Returns either an ERR_PTR() * or a pointer to the newly allocated device. */ struct lcd_device *lcd_device_register(const char *name, void *devdata, - struct lcd_properties *lp) + struct lcd_ops *ops) { int i, rc; struct lcd_device *new_ld; pr_debug("lcd_device_register: name=%s\n", name); - new_ld = kmalloc(sizeof(struct lcd_device), GFP_KERNEL); + new_ld = kzalloc(sizeof(struct lcd_device), GFP_KERNEL); if (!new_ld) return ERR_PTR(-ENOMEM); - mutex_init(&new_ld->props_lock); + mutex_init(&new_ld->ops_lock); mutex_init(&new_ld->update_lock); - new_ld->props = lp; - memset(&new_ld->class_dev, 0, sizeof(new_ld->class_dev)); + new_ld->ops = ops; new_ld->class_dev.class = &lcd_class; strlcpy(new_ld->class_dev.class_id, name, KOBJ_NAME_LEN); class_set_devdata(&new_ld->class_dev, devdata); @@ -253,9 +246,9 @@ void lcd_device_unregister(struct lcd_device *ld) class_device_remove_file(&ld->class_dev, &lcd_class_device_attributes[i]); - mutex_lock(&ld->props_lock); - ld->props = NULL; - mutex_unlock(&ld->props_lock); + mutex_lock(&ld->ops_lock); + ld->ops = NULL; + mutex_unlock(&ld->ops_lock); lcd_unregister_fb(ld); class_device_unregister(&ld->class_dev); } diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 3c5abbf0d042..d1312477813e 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -112,11 +112,11 @@ static int current_intensity; static int locomolcd_set_intensity(struct backlight_device *bd) { - int intensity = bd->props->brightness; + int intensity = bd->props.brightness; - if (bd->props->power != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK) intensity = 0; - if (bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.fb_blank != FB_BLANK_UNBLANK) intensity = 0; if (locomolcd_flags & LOCOMOLCD_SUSPENDED) intensity = 0; @@ -141,10 +141,9 @@ static int locomolcd_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_properties locomobl_data = { +static struct backlight_ops locomobl_data = { .get_brightness = locomolcd_get_intensity, .update_status = locomolcd_set_intensity, - .max_brightness = 4, }; #ifdef CONFIG_PM @@ -189,7 +188,8 @@ static int locomolcd_probe(struct locomo_dev *ldev) return PTR_ERR (locomolcd_bl_device); /* Set up frontlight so that screen is readable */ - locomobl_data.brightness = 2; + locomolcd_bl_device->props.max_brightness = 4, + locomolcd_bl_device->props.brightness = 2; locomolcd_set_intensity(locomolcd_bl_device); return 0; diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c index 42d6acd96c1a..702269357861 100644 --- a/drivers/video/backlight/progear_bl.c +++ b/drivers/video/backlight/progear_bl.c @@ -35,11 +35,11 @@ static struct pci_dev *sb_dev = NULL; static int progearbl_set_intensity(struct backlight_device *bd) { - int intensity = bd->props->brightness; + int intensity = bd->props.brightness; - if (bd->props->power != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK) intensity = 0; - if (bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.fb_blank != FB_BLANK_UNBLANK) intensity = 0; pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN); @@ -55,7 +55,7 @@ static int progearbl_get_intensity(struct backlight_device *bd) return intensity - HW_LEVEL_MIN; } -static struct backlight_properties progearbl_data = { +static struct backlight_ops progearbl_ops = { .get_brightness = progearbl_get_intensity, .update_status = progearbl_set_intensity, }; @@ -84,15 +84,15 @@ static int progearbl_probe(struct platform_device *pdev) progear_backlight_device = backlight_device_register("progear-bl", &pdev->dev, NULL, - &progearbl_data); + &progearbl_ops); if (IS_ERR(progear_backlight_device)) return PTR_ERR(progear_backlight_device); platform_set_drvdata(pdev, progear_backlight_device); - progearbl_data.power = FB_BLANK_UNBLANK; - progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; - progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; + progear_backlight_device->props.power = FB_BLANK_UNBLANK; + progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; + progear_backlight_device->props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; progearbl_set_intensity(progear_backlight_device); return 0; diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c index 2a17dfc232f3..af313bf1a2da 100644 --- a/drivers/video/chipsfb.c +++ b/drivers/video/chipsfb.c @@ -395,7 +395,7 @@ chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) /* turn on the backlight */ mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { - pmac_backlight->props->power = FB_BLANK_UNBLANK; + pmac_backlight->props.power = FB_BLANK_UNBLANK; backlight_update_status(pmac_backlight); } mutex_unlock(&pmac_backlight_mutex); diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c index 0e2bc519dcab..b7016e9b9e13 100644 --- a/drivers/video/nvidia/nv_backlight.c +++ b/drivers/video/nvidia/nv_backlight.c @@ -54,11 +54,11 @@ static int nvidia_bl_update_status(struct backlight_device *bd) if (!par->FlatPanel) return 0; - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK) level = 0; else - level = bd->props->brightness; + level = bd->props.brightness; tmp_pmc = NV_RD32(par->PMC, 0x10F0) & 0x0000FFFF; tmp_pcrt = NV_RD32(par->PCRTC0, 0x081C) & 0xFFFFFFFC; @@ -81,13 +81,12 @@ static int nvidia_bl_update_status(struct backlight_device *bd) static int nvidia_bl_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties nvidia_bl_data = { +static struct backlight_ops nvidia_bl_ops = { .get_brightness = nvidia_bl_get_brightness, .update_status = nvidia_bl_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; void nvidia_bl_init(struct nvidia_par *par) @@ -107,7 +106,7 @@ void nvidia_bl_init(struct nvidia_par *par) snprintf(name, sizeof(name), "nvidiabl%d", info->node); - bd = backlight_device_register(name, info->dev, par, &nvidia_bl_data); + bd = backlight_device_register(name, info->dev, par, &nvidia_bl_ops); if (IS_ERR(bd)) { info->bl_dev = NULL; printk(KERN_WARNING "nvidia: Backlight registration failed\n"); @@ -119,8 +118,9 @@ void nvidia_bl_init(struct nvidia_par *par) 0x158 * FB_BACKLIGHT_MAX / MAX_LEVEL, 0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL); - bd->props->brightness = nvidia_bl_data.max_brightness; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; + bd->props.brightness = nvidia_bl_data.max_brightness; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("nvidia: Backlight initialized (%s)\n", name); diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index 3a75def01b28..f8a3d608b208 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -308,11 +308,11 @@ static int riva_bl_update_status(struct backlight_device *bd) U032 tmp_pcrt, tmp_pmc; int level; - if (bd->props->power != FB_BLANK_UNBLANK || - bd->props->fb_blank != FB_BLANK_UNBLANK) + if (bd->props.power != FB_BLANK_UNBLANK || + bd->props.fb_blank != FB_BLANK_UNBLANK) level = 0; else - level = bd->props->brightness; + level = bd->props.brightness; tmp_pmc = par->riva.PMC[0x10F0/4] & 0x0000FFFF; tmp_pcrt = par->riva.PCRTC0[0x081C/4] & 0xFFFFFFFC; @@ -329,13 +329,12 @@ static int riva_bl_update_status(struct backlight_device *bd) static int riva_bl_get_brightness(struct backlight_device *bd) { - return bd->props->brightness; + return bd->props.brightness; } -static struct backlight_properties riva_bl_data = { +static struct backlight_ops riva_bl_ops = { .get_brightness = riva_bl_get_brightness, .update_status = riva_bl_update_status, - .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; static void riva_bl_init(struct riva_par *par) @@ -355,7 +354,7 @@ static void riva_bl_init(struct riva_par *par) snprintf(name, sizeof(name), "rivabl%d", info->node); - bd = backlight_device_register(name, info->dev, par, &riva_bl_data); + bd = backlight_device_register(name, info->dev, par, &riva_bl_ops); if (IS_ERR(bd)) { info->bl_dev = NULL; printk(KERN_WARNING "riva: Backlight registration failed\n"); @@ -367,8 +366,9 @@ static void riva_bl_init(struct riva_par *par) MIN_LEVEL * FB_BACKLIGHT_MAX / MAX_LEVEL, FB_BACKLIGHT_MAX); - bd->props->brightness = riva_bl_data.max_brightness; - bd->props->power = FB_BLANK_UNBLANK; + bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; + bd->props.brightness = riva_bl_data.max_brightness; + bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("riva: Backlight initialized (%s)\n", name); diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 43c6d55644b5..1023ba0d6e55 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -14,8 +14,8 @@ /* Notes on locking: * - * backlight_device->props_lock is an internal backlight lock protecting the - * props field and no code outside the core should need to touch it. + * backlight_device->ops_lock is an internal backlight lock protecting the + * ops pointer and no code outside the core should need to touch it. * * Access to update_status() is serialised by the update_lock mutex since * most drivers seem to need this and historically get it wrong. @@ -30,9 +30,7 @@ struct backlight_device; struct fb_info; -/* This structure defines all the properties of a backlight - (usually attached to a LCD). */ -struct backlight_properties { +struct backlight_ops { /* Notify the backlight driver some property has changed */ int (*update_status)(struct backlight_device *); /* Return the current backlight brightness (accounting for power, @@ -41,7 +39,10 @@ struct backlight_properties { /* Check if given framebuffer device is the one bound to this backlight; return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */ int (*check_fb)(struct fb_info *); +}; +/* This structure defines all the properties of a backlight */ +struct backlight_properties { /* Current User requested brightness (0 - max_brightness) */ int brightness; /* Maximal value for brightness (read-only) */ @@ -54,14 +55,18 @@ struct backlight_properties { }; struct backlight_device { - /* This protects the 'props' field. If 'props' is NULL, the driver that - registered this device has been unloaded, and if class_get_devdata() - points to something in the body of that driver, it is also invalid. */ - struct mutex props_lock; - /* If this is NULL, the backing module is unloaded */ - struct backlight_properties *props; + /* Backlight properties */ + struct backlight_properties props; + /* Serialise access to update_status method */ struct mutex update_lock; + + /* This protects the 'ops' field. If 'ops' is NULL, the driver that + registered this device has been unloaded, and if class_get_devdata() + points to something in the body of that driver, it is also invalid. */ + struct mutex ops_lock; + struct backlight_ops *ops; + /* The framebuffer notifier block */ struct notifier_block fb_notif; /* The class device structure */ @@ -71,13 +76,13 @@ struct backlight_device { static inline void backlight_update_status(struct backlight_device *bd) { mutex_lock(&bd->update_lock); - if (bd->props && bd->props->update_status) - bd->props->update_status(bd); + if (bd->ops && bd->ops->update_status) + bd->ops->update_status(bd); mutex_unlock(&bd->update_lock); } extern struct backlight_device *backlight_device_register(const char *name, - struct device *dev,void *devdata,struct backlight_properties *bp); + struct device *dev, void *devdata, struct backlight_ops *ops); extern void backlight_device_unregister(struct backlight_device *bd); #define to_backlight_device(obj) container_of(obj, struct backlight_device, class_dev) diff --git a/include/linux/lcd.h b/include/linux/lcd.h index 46970af2ca89..598793c0745b 100644 --- a/include/linux/lcd.h +++ b/include/linux/lcd.h @@ -14,7 +14,7 @@ /* Notes on locking: * - * lcd_device->props_lock is an internal backlight lock protecting the props + * lcd_device->ops_lock is an internal backlight lock protecting the ops * field and no code outside the core should need to touch it. * * Access to set_power() is serialised by the update_lock mutex since @@ -30,15 +30,17 @@ struct lcd_device; struct fb_info; -/* This structure defines all the properties of a LCD flat panel. */ struct lcd_properties { + /* The maximum value for contrast (read-only) */ + int max_contrast; +}; + +struct lcd_ops { /* Get the LCD panel power status (0: full on, 1..3: controller power on, flat panel power off, 4: full off), see FB_BLANK_XXX */ int (*get_power)(struct lcd_device *); /* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */ int (*set_power)(struct lcd_device *, int power); - /* The maximum value for contrast (read-only) */ - int max_contrast; /* Get the current contrast setting (0-max_contrast) */ int (*get_contrast)(struct lcd_device *); /* Set LCD panel contrast */ @@ -49,12 +51,13 @@ struct lcd_properties { }; struct lcd_device { - /* This protects the 'props' field. If 'props' is NULL, the driver that + struct lcd_properties props; + /* This protects the 'ops' field. If 'ops' is NULL, the driver that registered this device has been unloaded, and if class_get_devdata() points to something in the body of that driver, it is also invalid. */ - struct mutex props_lock; + struct mutex ops_lock; /* If this is NULL, the backing module is unloaded */ - struct lcd_properties *props; + struct lcd_ops *ops; /* Serialise access to set_power method */ struct mutex update_lock; /* The framebuffer notifier block */ @@ -66,13 +69,13 @@ struct lcd_device { static inline void lcd_set_power(struct lcd_device *ld, int power) { mutex_lock(&ld->update_lock); - if (ld->props && ld->props->set_power) - ld->props->set_power(ld, power); + if (ld->ops && ld->ops->set_power) + ld->ops->set_power(ld, power); mutex_unlock(&ld->update_lock); } extern struct lcd_device *lcd_device_register(const char *name, - void *devdata, struct lcd_properties *lp); + void *devdata, struct lcd_ops *ops); extern void lcd_device_unregister(struct lcd_device *ld); #define to_lcd_device(obj) container_of(obj, struct lcd_device, class_dev) -- cgit From adb005818b71e9476581a1de5742e2f427ac9e2b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 22 Feb 2007 16:04:55 -0200 Subject: ACPI: ibm-acpi: fix initial status of backlight device The brightness class core does not update the initial status of the device's brightness at register time. Do it by ourselves. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Richard Purdie --- drivers/acpi/ibm_acpi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 4cc534e36e81..7c1b418676b9 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -1711,6 +1711,12 @@ static struct backlight_ops ibm_backlight_data = { static int brightness_init(void) { + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, &ibm_backlight_data); if (IS_ERR(ibm_backlight_device)) { @@ -1718,7 +1724,9 @@ static int brightness_init(void) return PTR_ERR(ibm_backlight_device); } - ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); return 0; } -- cgit From 2bc808a8c4821a8ef4e3dc35b8fc577a9d2c6f0d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Wed, 21 Feb 2007 13:05:38 -0200 Subject: ACPI: ibm-acpi: make ibm-acpi bay support optional Make ibm-acpi bay support optional at kernel compile time. Signed-off-by: Henrique de Moraes Holschuh --- drivers/acpi/Kconfig | 11 +++++++++++ drivers/acpi/ibm_acpi.c | 12 ++++++++++++ 2 files changed, 23 insertions(+) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index e942ffe8b57e..ee3dcd121827 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -242,6 +242,17 @@ config ACPI_IBM_DOCK If you are not sure, say N here. +config ACPI_IBM_BAY + bool "Legacy Removable Bay Support" + depends on ACPI_IBM + default y + ---help--- + Allows the ibm_acpi driver to handle removable bays. It will allow + disabling the device in the bay, and also generate notifications when + the bay lever is ejected or inserted. + + If you are not sure, say Y here. + config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on X86 diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 7c1b418676b9..e7309a668732 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -157,6 +157,7 @@ IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ "\\_SB.PCI.ISA.SLCE", /* 570 */ ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ #endif +#ifdef CONFIG_ACPI_IBM_BAY IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ @@ -174,6 +175,7 @@ IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ "_EJ0", /* 770x */ ); /* all others */ +#endif /* CONFIG_ACPI_IBM_BAY */ /* don't list other alternatives as we install a notify handler on the 570 */ IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ @@ -1044,6 +1046,7 @@ static int light_write(char *buf) return 0; } +#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) static int _sta(acpi_handle handle) { int status; @@ -1053,6 +1056,7 @@ static int _sta(acpi_handle handle) return status; } +#endif #ifdef CONFIG_ACPI_IBM_DOCK #define dock_docked() (_sta(dock_handle) & 1) @@ -1119,6 +1123,7 @@ static void dock_notify(struct ibm_struct *ibm, u32 event) } #endif +#ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; static int bay_status2_supported; static int bay_eject_supported; @@ -1194,6 +1199,7 @@ static void bay_notify(struct ibm_struct *ibm, u32 event) { acpi_bus_generate_event(ibm->device, event, 0); } +#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -2361,6 +2367,7 @@ static struct ibm_struct ibms[] = { .type = ACPI_SYSTEM_NOTIFY, }, #endif +#ifdef CONFIG_ACPI_IBM_BAY { .name = "bay", .init = bay_init, @@ -2370,6 +2377,7 @@ static struct ibm_struct ibms[] = { .handle = &bay_handle, .type = ACPI_SYSTEM_NOTIFY, }, +#endif /* CONFIG_ACPI_IBM_BAY */ { .name = "cmos", .read = cmos_read, @@ -2655,7 +2663,9 @@ IBM_PARAM(light); #ifdef CONFIG_ACPI_IBM_DOCK IBM_PARAM(dock); #endif +#ifdef CONFIG_ACPI_IBM_BAY IBM_PARAM(bay); +#endif /* CONFIG_ACPI_IBM_BAY */ IBM_PARAM(cmos); IBM_PARAM(led); IBM_PARAM(beep); @@ -2731,12 +2741,14 @@ static int __init acpi_ibm_init(void) IBM_HANDLE_INIT(dock); #endif IBM_HANDLE_INIT(pci); +#ifdef CONFIG_ACPI_IBM_BAY IBM_HANDLE_INIT(bay); if (bay_handle) IBM_HANDLE_INIT(bay_ej); IBM_HANDLE_INIT(bay2); if (bay2_handle) IBM_HANDLE_INIT(bay2_ej); +#endif /* CONFIG_ACPI_IBM_BAY */ IBM_HANDLE_INIT(beep); IBM_HANDLE_INIT(ecrd); IBM_HANDLE_INIT(ecwr); -- cgit From c9bf296b6467968ecb9d988e7ed754a19c2e63d9 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 8 Mar 2007 05:28:15 -0300 Subject: ACPI: ibm-acpi: improve backlight power handling Improve the backlight code to emulate as much as possible the power management events, as we are unable to really power on or power off the backlight. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Richard Purdie Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e7309a668732..36901362fd24 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -86,6 +86,7 @@ #include #include +#include #include #include @@ -1707,7 +1708,10 @@ static int brightness_write(char *buf) static int brightness_update_status(struct backlight_device *bd) { - return brightness_set(bd->props.brightness); + return brightness_set( + (bd->props.fb_blank == FB_BLANK_UNBLANK && + bd->props.power == FB_BLANK_UNBLANK) ? + bd->props.brightness : 0); } static struct backlight_ops ibm_backlight_data = { -- cgit From 96e89afe6da630dc54cfbca33c2c6a7ab9b6c11b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 15 Mar 2007 16:15:06 -0300 Subject: ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) This patch allows for ibm-acpi to coexist (with diminished functionality) with other drivers like ACPI_BAY. ibm-acpi will simply disable the functions it is not able to register ACPI notifiers for. Signed-off-by: Henrique de Moraes Holschuh Cc: Chris Wedgwood Cc: Kristen Carlson Accardi Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 36901362fd24..dc1096608f43 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -2507,7 +2507,7 @@ static int __init setup_notify(struct ibm_struct *ibm) ret = acpi_bus_get_device(*ibm->handle, &ibm->device); if (ret < 0) { printk(IBM_ERR "%s device not present\n", ibm->name); - return 0; + return -ENODEV; } acpi_driver_data(ibm->device) = ibm; @@ -2516,8 +2516,13 @@ static int __init setup_notify(struct ibm_struct *ibm) status = acpi_install_notify_handler(*ibm->handle, ibm->type, dispatch_notify, ibm); if (ACPI_FAILURE(status)) { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); + if (status == AE_ALREADY_EXISTS) { + printk(IBM_NOTICE "another device driver is already handling %s events\n", + ibm->name); + } else { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + } return -ENODEV; } ibm->notify_installed = 1; @@ -2553,6 +2558,8 @@ static int __init register_driver(struct ibm_struct *ibm) return ret; } +static void ibm_exit(struct ibm_struct *ibm); + static int __init ibm_init(struct ibm_struct *ibm) { int ret; @@ -2594,6 +2601,12 @@ static int __init ibm_init(struct ibm_struct *ibm) if (ibm->notify) { ret = setup_notify(ibm); + if (ret == -ENODEV) { + printk(IBM_NOTICE "disabling subdriver %s\n", + ibm->name); + ibm_exit(ibm); + return 0; + } if (ret < 0) return ret; } -- cgit From 837ca6ddb440c186eaa8e01b69486581d3457f2c Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:33:54 -0300 Subject: ACPI: ibm-acpi: kill trailing whitespace I shall protect the ibm-acpi city against the invasion of the barbarian blanks! To the unforgiving jaws of sed s/[[:blank:]]\+$// they go! Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/ibm-acpi.txt | 6 +++--- drivers/acpi/ibm_acpi.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 0132d363feb5..cdcef016907a 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -21,7 +21,7 @@ detailed description): - Fn key combinations - Bluetooth enable and disable - - video output switching, expansion control + - video output switching, expansion control - ThinkLight on and off - limited docking and undocking - UltraBay eject @@ -472,7 +472,7 @@ This feature dumps the values of 256 embedded controller registers. Values which have changed since the last time the registers were dumped are marked with a star: -[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump +[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00 EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00 @@ -503,7 +503,7 @@ vary. The second ensures that the fan-related values do vary, since the fan speed fluctuates a bit. The third will (hopefully) mark the fan register with a star: -[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump +[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00 EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00 diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index dc1096608f43..60aaed92eef9 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -28,7 +28,7 @@ * 2006-11-22 0.13 new maintainer * changelog now lives in git commit history, and will * not be updated further in-file. - * + * * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels * 2005-03-17 0.11 support for 600e, 770x * thanks to Jamie Lentin @@ -38,7 +38,7 @@ * experimental brightness control * experimental volume control * experimental fan enable/disable - * 2005-01-16 0.10 fix module loading on R30, R31 + * 2005-01-16 0.10 fix module loading on R30, R31 * 2005-01-16 0.9 support for 570, R30, R31 * ultrabay support on A22p, A3x * limit arg for cmos, led, beep, drop experimental status @@ -161,7 +161,7 @@ IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ #ifdef CONFIG_ACPI_IBM_BAY IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ ); /* A21e, R30, R31 */ -- cgit From e062e0343871a41e8ec408f1c1e8ac3b0310da9d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:33:55 -0300 Subject: ACPI: ibm-acpi: rename some identifiers Rename some identifiers so that they are more in tune with the rest of the driver code, or less generic. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 60aaed92eef9..41c46b00511b 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -506,7 +506,7 @@ static int ibm_acpi_driver_init(void) return 0; } -static int driver_read(char *p) +static int ibm_acpi_driver_read(char *p) { int len = 0; @@ -1310,9 +1310,9 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define EC_HLCL 0x0c -#define EC_HLBL 0x0d -#define EC_HLMS 0x0e +#define IBMACPI_LED_EC_HLCL 0x0c +#define IBMACPI_LED_EC_HLBL 0x0d +#define IBMACPI_LED_EC_HLMS 0x0e static int led_write(char *buf) { @@ -1344,13 +1344,15 @@ static int led_write(char *buf) } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; - ret = ec_write(EC_HLMS, led); + ret = ec_write(IBMACPI_LED_EC_HLMS, led); if (ret >= 0) ret = - ec_write(EC_HLBL, led * led_exp_hlbl[ind]); + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) ret = - ec_write(EC_HLCL, led * led_exp_hlcl[ind]); + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -1657,8 +1659,8 @@ static int brightness_read(char *p) return len; } -#define BRIGHTNESS_UP 4 -#define BRIGHTNESS_DOWN 5 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 static int brightness_set(int value) { @@ -1667,7 +1669,8 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1769,9 +1772,9 @@ static int volume_read(char *p) return len; } -#define VOLUME_DOWN 0 -#define VOLUME_UP 1 -#define VOLUME_MUTE 2 +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 static int volume_write(char *buf) { @@ -1805,7 +1808,8 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN; + cmos_cmd = new_level > level ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1817,14 +1821,15 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (!cmos_eval(VOLUME_MUTE) || + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || !acpi_ec_write(volume_offset, new_level + mute))) return -EIO; } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP; + cmos_cmd = new_mute ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -2315,7 +2320,7 @@ static struct ibm_struct ibms[] = { { .name = "driver", .init = ibm_acpi_driver_init, - .read = driver_read, + .read = ibm_acpi_driver_read, }, { .name = "hotkey", @@ -2534,7 +2539,7 @@ static int __init ibm_device_add(struct acpi_device *device) return 0; } -static int __init register_driver(struct ibm_struct *ibm) +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) { int ret; @@ -2569,7 +2574,7 @@ static int __init ibm_init(struct ibm_struct *ibm) return 0; if (ibm->hid) { - ret = register_driver(ibm); + ret = register_ibmacpi_subdriver(ibm); if (ret < 0) return ret; ibm->driver_registered = 1; -- cgit From 1406cdd1760743106278c1f02a0f445159c8f400 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:33:56 -0300 Subject: ACPI: ibm-acpi: add header file Add a (private) header file for ibm-acpi, and move type definitions and ThinkPad driver constants to the new header file. This patch has no functional changes. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 139 +-------------- drivers/acpi/ibm_acpi.h | 437 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 438 insertions(+), 138 deletions(-) create mode 100644 drivers/acpi/ibm_acpi.h (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 41c46b00511b..e2da95498f32 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -78,44 +78,13 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" +#include "ibm_acpi.h" MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - #define __unused __attribute__ ((unused)) static int experimental; @@ -207,22 +176,6 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - /* * FAN ACCESS MODES * @@ -323,72 +276,12 @@ struct ibm_thermal_sensors_struct { * but the ACPI tables just mention level 7. */ -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - static char *ibm_thinkpad_ec_found = NULL; -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - static struct proc_dir_entry *proc_dir = NULL; static struct backlight_device *ibm_backlight_device = NULL; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -775,13 +668,6 @@ static int wan_write(char *buf) return 0; } -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - static enum video_access_mode video_supported; static int video_orig_autosw; @@ -1248,12 +1134,6 @@ static int cmos_write(char *buf) return 0; } -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; static enum led_access_mode led_supported; static int led_init(void) @@ -1310,10 +1190,6 @@ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; -#define IBMACPI_LED_EC_HLCL 0x0c -#define IBMACPI_LED_EC_HLBL 0x0d -#define IBMACPI_LED_EC_HLMS 0x0e - static int led_write(char *buf) { char *cmd; @@ -1629,8 +1505,6 @@ static int ecdump_write(char *buf) return 0; } -static int brightness_offset = 0x31; - static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1659,9 +1533,6 @@ static int brightness_read(char *p) return len; } -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1752,8 +1623,6 @@ static void brightness_exit(void) } } -static int volume_offset = 0x30; - static int volume_read(char *p) { int len = 0; @@ -1772,10 +1641,6 @@ static int volume_read(char *p) return len; } -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 - static int volume_write(char *buf) { int cmos_cmd, inc, i; @@ -2563,8 +2428,6 @@ static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) return ret; } -static void ibm_exit(struct ibm_struct *ibm); - static int __init ibm_init(struct ibm_struct *ibm) { int ret; diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h new file mode 100644 index 000000000000..7ebaaa40e183 --- /dev/null +++ b/drivers/acpi/ibm_acpi.h @@ -0,0 +1,437 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +static struct ibm_struct ibms[]; +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- cgit From 56b6aeb05890f219895197f5166637b3d7a6f679 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:33:57 -0300 Subject: ACPI: ibm-acpi: organize code Shuffle code around to better organize the driver code inside the ibm-acpi.c file. This patch adds no functional changes. It is pure fluff that will make me a bit more productive. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 1476 +++++++++++++++++++++++++---------------------- 1 file changed, 796 insertions(+), 680 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index e2da95498f32..984ec81bd234 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -87,8 +87,17 @@ MODULE_LICENSE("GPL"); #define __unused __attribute__ ((unused)) -static int experimental; -module_param(experimental, int, 0); +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ static acpi_handle root_handle = NULL; @@ -105,183 +114,31 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ "\\_SB.PCI0.ICH3.EC0", /* R31 */ "\\_SB.PCI0.LPC.EC", /* all others */ - ); + ); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +/************************************************************************* + * Misc ACPI handles + */ IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ - ); /* all others */ -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ - -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ - -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ -#endif /* CONFIG_ACPI_IBM_BAY */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + ); /* all others */ IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ - ); /* 570 */ + ); /* 570 */ -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ - -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ - -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ - -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. +/************************************************************************* + * ACPI helpers */ -static char *ibm_thinkpad_ec_found = NULL; - -static struct proc_dir_entry *proc_dir = NULL; - -static struct backlight_device *ibm_backlight_device = NULL; - static int acpi_evalf(acpi_handle handle, void *res, char *method, char *fmt, ...) { @@ -354,21 +211,218 @@ static int acpi_evalf(acpi_handle handle, return 0; } - if (!success && !quiet) - printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", - method, fmt0, status); + if (!success && !quiet) + printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", + method, fmt0, status); + + return success; +} + +static void __unused acpi_print_int(acpi_handle handle, char *method) +{ + int i; + + if (acpi_evalf(handle, &i, method, "d")) + printk(IBM_INFO "%s = 0x%x\n", method, i); + else + printk(IBM_ERR "error calling %s\n", method); +} + +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return -ENODEV; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + if (status == AE_ALREADY_EXISTS) { + printk(IBM_NOTICE "another device driver is already handling %s events\n", + ibm->name); + } else { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + } + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; - return success; -} + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } -static void __unused acpi_print_int(acpi_handle handle, char *method) -{ - int i; + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; - if (acpi_evalf(handle, &i, method, "d")) - printk(IBM_INFO "%s = 0x%x\n", method, i); - else - printk(IBM_ERR "error calling %s\n", method); + kfree(kernbuf); + + return ret; } static char *next_cmd(char **cmds) @@ -387,6 +441,19 @@ static char *next_cmd(char **cmds) return start; } + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + static int ibm_acpi_driver_init(void) { printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); @@ -409,11 +476,51 @@ static int ibm_acpi_driver_read(char *p) return len; } +/************************************************************************* + * Hotkey subdriver + */ + static int hotkey_supported; static int hotkey_mask_supported; static int hotkey_orig_status; static int hotkey_orig_mask; +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + static int hotkey_get(int *status, int *mask) { if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) @@ -444,24 +551,6 @@ static int hotkey_set(int status, int mask) return 1; } -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - static int hotkey_read(char *p) { int status, mask; @@ -523,23 +612,9 @@ static int hotkey_write(char *buf) return 0; } -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} +/************************************************************************* + * Bluetooth subdriver + */ static int bluetooth_supported; @@ -606,6 +681,10 @@ static int bluetooth_write(char *buf) return 0; } +/************************************************************************* + * Wan subdriver + */ + static int wan_supported; static int wan_init(void) @@ -668,9 +747,22 @@ static int wan_write(char *buf) return 0; } +/************************************************************************* + * Video subdriver + */ + static enum video_access_mode video_supported; static int video_orig_autosw; +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + static int video_init(void) { int ivga; @@ -695,6 +787,11 @@ static int video_init(void) return 0; } +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + static int video_status(void) { int status = 0; @@ -736,33 +833,6 @@ static int video_autosw(void) return autosw & 1; } -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - static int video_switch(void) { int autosw = video_autosw(); @@ -812,6 +882,33 @@ static int video_switch2(int status) return ret; } +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + static int video_write(char *buf) { char *cmd; @@ -862,14 +959,16 @@ static int video_write(char *buf) return 0; } -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} +/************************************************************************* + * Light (thinklight) subdriver + */ static int light_supported; static int light_status_supported; +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + static int light_init(void) { /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ @@ -933,21 +1032,45 @@ static int light_write(char *buf) return 0; } -#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; +/************************************************************************* + * Dock subdriver + */ - return status; -} -#endif +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ #ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + #define dock_docked() (_sta(dock_handle) & 1) +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + static int dock_read(char *p) { int len = 0; @@ -976,39 +1099,22 @@ static int dock_write(char *buf) if (strlencmp(cmd, "undock") == 0) { if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) || !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1)) - return -EIO; - } else if (strlencmp(cmd, "dock") == 0) { - if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1)) - return -EIO; - } else - return -EINVAL; - } - - return 0; -} - -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); - - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + return -EIO; + } else if (strlencmp(cmd, "dock") == 0) { + if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1)) + return -EIO; + } else + return -EINVAL; } + + return 0; } -#endif + +#endif /* CONFIG_ACPI_IBM_DOCK */ + +/************************************************************************* + * Bay subdriver + */ #ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; @@ -1016,6 +1122,21 @@ static int bay_status2_supported; static int bay_eject_supported; static int bay_eject2_supported; +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + static int bay_init(void) { bay_status_supported = bay_handle && @@ -1031,6 +1152,11 @@ static int bay_init(void) return 0; } +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + #define bay_occupied(b) (_sta(b##_handle) & 1) static int bay_read(char *p) @@ -1081,12 +1207,19 @@ static int bay_write(char *buf) return 0; } +#endif /* CONFIG_ACPI_IBM_BAY */ -static void bay_notify(struct ibm_struct *ibm, u32 event) +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) { - acpi_bus_generate_event(ibm->device, event, 0); + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; } -#endif /* CONFIG_ACPI_IBM_BAY */ static int cmos_read(char *p) { @@ -1104,14 +1237,6 @@ static int cmos_read(char *p) return len; } -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - static int cmos_write(char *buf) { char *cmd; @@ -1134,8 +1259,18 @@ static int cmos_write(char *buf) return 0; } + +/************************************************************************* + * LED subdriver + */ + static enum led_access_mode led_supported; +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + static int led_init(void) { if (!led_handle) @@ -1242,6 +1377,12 @@ static int led_write(char *buf) return 0; } +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + static int beep_read(char *p) { int len = 0; @@ -1277,34 +1418,9 @@ static int beep_write(char *buf) return 0; } -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} +/************************************************************************* + * Thermal subdriver + */ static enum thermal_access_mode thermal_read_mode; @@ -1446,6 +1562,10 @@ static int thermal_read(char *p) return len; } +/************************************************************************* + * EC Dump subdriver + */ + static u8 ecdump_regs[256]; static int ecdump_read(char *p) @@ -1505,6 +1625,55 @@ static int ecdump_write(char *buf) return 0; } +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set( + (bd->props.fb_blank == FB_BLANK_UNBLANK && + bd->props.power == FB_BLANK_UNBLANK) ? + bd->props.brightness : 0); +} + static int brightness_get(struct backlight_device *bd) { u8 level; @@ -1516,23 +1685,6 @@ static int brightness_get(struct backlight_device *bd) return level; } -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel " - " ( is 0-7)\n"); - } - - return len; -} - static int brightness_set(int value) { int cmos_cmd, inc, i; @@ -1540,8 +1692,7 @@ static int brightness_set(int value) value &= 7; - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; inc = value > current_value ? 1 : -1; for (i = current_value; i != value; i += inc) { if (!cmos_eval(cmos_cmd)) @@ -1553,6 +1704,23 @@ static int brightness_set(int value) return 0; } +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel " + " ( is 0-7)\n"); + } + + return len; +} + static int brightness_write(char *buf) { int level; @@ -1580,48 +1748,9 @@ static int brightness_write(char *buf) return 0; } -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set( - (bd->props.fb_blank == FB_BLANK_UNBLANK && - bd->props.power == FB_BLANK_UNBLANK) ? - bd->props.brightness : 0); -} - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} +/************************************************************************* + * Volume subdriver + */ static int volume_read(char *p) { @@ -1673,8 +1802,7 @@ static int volume_write(char *buf) return -EINVAL; if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? - TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (!cmos_eval(cmos_cmd) || @@ -1693,8 +1821,7 @@ static int volume_write(char *buf) } if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? - TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (!cmos_eval(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -1705,6 +1832,111 @@ static int volume_write(char *buf) return 0; } + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; @@ -1716,6 +1948,14 @@ static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + static int fan_init(void) { fan_status_access_mode = IBMACPI_FAN_NONE; @@ -1831,6 +2071,12 @@ static int fan_get_status(u8 *status) return 0; } +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + static int fan_get_speed(unsigned int *speed) { u8 hi, lo; @@ -1854,10 +2100,14 @@ static int fan_get_speed(unsigned int *speed) return 0; } -static void fan_exit(void) +static void fan_watchdog_fire(struct work_struct *ignored) { - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } } static void fan_watchdog_reset(void) @@ -1879,90 +2129,6 @@ static void fan_watchdog_reset(void) fan_watchdog_active = 0; } -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel "); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " ( is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " ( is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog ( is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed " - " ( is 0-65535)\n"); - - return len; -} - static int fan_set_level(int level) { switch (fan_control_access_mode) { @@ -2053,25 +2219,109 @@ static int fan_set_disable(void) default: return -ENXIO; } - return 0; -} + return 0; +} + +static int fan_set_speed(int speed) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + if (speed >= 0 && speed <= 65535) { + if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", + speed, speed, speed)) + return -EIO; + } else + return -EINVAL; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel "); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " ( is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " ( is 0-7, " + "auto, disengaged)\n"); + break; + } + } -static int fan_set_speed(int speed) -{ - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_FANS: - if (speed >= 0 && speed <= 65535) { - if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", - speed, speed, speed)) - return -EIO; - } else - return -EINVAL; - break; + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog ( is 0 (off), " + "1-120 (seconds))\n"); - default: - return -ENXIO; - } - return 0; + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed " + " ( is 0-65535)\n"); + + return len; } static int fan_write_cmd_level(const char *cmd, int *rc) @@ -2171,16 +2421,18 @@ static int fan_write(char *buf) return rc; } -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ + +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; +/* Subdriver registry */ static struct ibm_struct ibms[] = { { .name = "driver", @@ -2301,132 +2553,9 @@ static struct ibm_struct ibms[] = { }, }; -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return -ENODEV; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - if (status == AE_ALREADY_EXISTS) { - printk(IBM_NOTICE "another device driver is already handling %s events\n", - ibm->name); - } else { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - } - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} +/* + * Module and infrastructure proble, init and exit handling + */ static int __init ibm_init(struct ibm_struct *ibm) { @@ -2500,27 +2629,35 @@ static void ibm_exit(struct ibm_struct *ibm) } } -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) { - int i; - acpi_status status; + struct dmi_device *dev = NULL; + char ec_fw_string[18]; - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); } } - - *handle = NULL; + return NULL; } -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) +/* Module init, exit, parameters */ static int __init set_ibm_param(const char *val, struct kernel_param *kp) { @@ -2538,6 +2675,9 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } +static int experimental; +module_param(experimental, int, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -2559,44 +2699,6 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - static int __init acpi_ibm_init(void) { int ret, i; @@ -2662,5 +2764,19 @@ static int __init acpi_ibm_init(void) return 0; } +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + module_init(acpi_ibm_init); module_exit(acpi_ibm_exit); -- cgit From a62bc916cf48caaf9efa2fed20440fd617647c6c Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:33:58 -0300 Subject: ACPI: ibm-acpi: update copyright notice Update copyright and license info on the source code comments. No functional changes. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/ibm_acpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 984ec81bd234..ae03b8f6f7be 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006 Henrique de Moraes Holschuh + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #define IBM_VERSION "0.13" -- cgit From 3ede41c718c7845905231019e42d05a3ed329515 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 23 Mar 2007 17:34:00 -0300 Subject: ACPI: ibm-acpi: move driver to drivers/misc hierarchy ibm-acpi is not an ACPICA driver, so move it to drivers/misc as per Len Brown's request. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 37 - drivers/acpi/Makefile | 1 - drivers/acpi/ibm_acpi.c | 2783 ----------------------------------------------- drivers/acpi/ibm_acpi.h | 437 -------- drivers/misc/Kconfig | 37 + drivers/misc/Makefile | 1 + drivers/misc/ibm_acpi.c | 2783 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/misc/ibm_acpi.h | 437 ++++++++ 8 files changed, 3258 insertions(+), 3258 deletions(-) delete mode 100644 drivers/acpi/ibm_acpi.c delete mode 100644 drivers/acpi/ibm_acpi.h create mode 100644 drivers/misc/ibm_acpi.c create mode 100644 drivers/misc/ibm_acpi.h (limited to 'drivers/acpi/ibm_acpi.c') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index e2ce4a9c1c92..45c43150826b 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -218,43 +218,6 @@ config ACPI_ASUS NOTE: This driver is deprecated and will probably be removed soon, use asus-laptop instead. -config ACPI_IBM - tristate "IBM ThinkPad Laptop Extras" - depends on X86 - select BACKLIGHT_CLASS_DEVICE - ---help--- - This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds - support for Fn-Fx key combinations, Bluetooth control, video - output switching, ThinkLight control, UltraBay eject and more. - For more information about this driver see - and . - - If you have an IBM ThinkPad laptop, say Y or M here. - -config ACPI_IBM_DOCK - bool "Legacy Docking Station Support" - depends on ACPI_IBM - depends on ACPI_DOCK=n - default n - ---help--- - Allows the ibm_acpi driver to handle docking station events. - This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will - allow locking and removing the laptop from the docking station, - but will not properly connect PCI devices. - - If you are not sure, say N here. - -config ACPI_IBM_BAY - bool "Legacy Removable Bay Support" - depends on ACPI_IBM - default y - ---help--- - Allows the ibm_acpi driver to handle removable bays. It will allow - disabling the device in the bay, and also generate notifications when - the bay lever is ejected or inserted. - - If you are not sure, say Y here. - config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on X86 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 5956e9f64a8b..92642ab15451 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -55,7 +55,6 @@ obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o -obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o obj-y += cm_sbs.o diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c deleted file mode 100644 index ae03b8f6f7be..000000000000 --- a/drivers/acpi/ibm_acpi.c +++ /dev/null @@ -1,2783 +0,0 @@ -/* - * ibm_acpi.c - IBM ThinkPad ACPI Extras - * - * - * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006-2007 Henrique de Moraes Holschuh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#define IBM_VERSION "0.13" - -/* - * Changelog: - * - * 2006-11-22 0.13 new maintainer - * changelog now lives in git commit history, and will - * not be updated further in-file. - * - * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels - * 2005-03-17 0.11 support for 600e, 770x - * thanks to Jamie Lentin - * support for 770e, G41 - * G40 and G41 don't have a thinklight - * temperatures no longer experimental - * experimental brightness control - * experimental volume control - * experimental fan enable/disable - * 2005-01-16 0.10 fix module loading on R30, R31 - * 2005-01-16 0.9 support for 570, R30, R31 - * ultrabay support on A22p, A3x - * limit arg for cmos, led, beep, drop experimental status - * more capable led control on A21e, A22p, T20-22, X20 - * experimental temperatures and fan speed - * experimental embedded controller register dump - * mark more functions as __init, drop incorrect __exit - * use MODULE_VERSION - * thanks to Henrik Brix Andersen - * fix parameter passing on module loading - * thanks to Rusty Russell - * thanks to Jim Radford - * 2004-11-08 0.8 fix init error case, don't return from a macro - * thanks to Chris Wright - * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20 - * fix led control on A21e - * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device - * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20 - * proc file format changed - * video_switch command - * experimental cmos control - * experimental led control - * experimental acpi sounds - * 2004-09-16 0.4 support for module parameters - * hotkey mask can be prefixed by 0x - * video output switching - * video expansion control - * ultrabay eject support - * removed lcd brightness/on/off control, didn't work - * 2004-08-17 0.3 support for R40 - * lcd off, brightness control - * thinklight on/off - * 2004-08-14 0.2 support for T series, X20 - * bluetooth enable/disable - * hotkey events disabled by default - * removed fan control, currently useless - * 2004-08-09 0.1 initial release, support for X series - */ - -#include "ibm_acpi.h" - -MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); -MODULE_DESCRIPTION(IBM_DESC); -MODULE_VERSION(IBM_VERSION); -MODULE_LICENSE("GPL"); - -#define __unused __attribute__ ((unused)) - -/**************************************************************************** - **************************************************************************** - * - * ACPI Helpers and device model - * - **************************************************************************** - ****************************************************************************/ - -/************************************************************************* - * ACPI basic handles - */ - -static acpi_handle root_handle = NULL; - -#define IBM_HANDLE(object, parent, paths...) \ - static acpi_handle object##_handle; \ - static acpi_handle *object##_parent = &parent##_handle; \ - static char *object##_path; \ - static char *object##_paths[] = { paths } - -IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ - "\\_SB.PCI.ISA.EC", /* 570 */ - "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */ - "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ - "\\_SB.PCI0.ICH3.EC0", /* R31 */ - "\\_SB.PCI0.LPC.EC", /* all others */ - ); - -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ - - -/************************************************************************* - * Misc ACPI handles - */ - -IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ - "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ - "\\CMS", /* R40, R40e */ - ); /* all others */ - -IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ - "^HKEY", /* R30, R31 */ - "HKEY", /* all others */ - ); /* 570 */ - - -/************************************************************************* - * ACPI helpers - */ - -static int acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...) -{ - char *fmt0 = fmt; - struct acpi_object_list params; - union acpi_object in_objs[IBM_MAX_ACPI_ARGS]; - struct acpi_buffer result, *resultp; - union acpi_object out_obj; - acpi_status status; - va_list ap; - char res_type; - int success; - int quiet; - - if (!*fmt) { - printk(IBM_ERR "acpi_evalf() called with empty format\n"); - return 0; - } - - if (*fmt == 'q') { - quiet = 1; - fmt++; - } else - quiet = 0; - - res_type = *(fmt++); - - params.count = 0; - params.pointer = &in_objs[0]; - - va_start(ap, fmt); - while (*fmt) { - char c = *(fmt++); - switch (c) { - case 'd': /* int */ - in_objs[params.count].integer.value = va_arg(ap, int); - in_objs[params.count++].type = ACPI_TYPE_INTEGER; - break; - /* add more types as needed */ - default: - printk(IBM_ERR "acpi_evalf() called " - "with invalid format character '%c'\n", c); - return 0; - } - } - va_end(ap); - - if (res_type != 'v') { - result.length = sizeof(out_obj); - result.pointer = &out_obj; - resultp = &result; - } else - resultp = NULL; - - status = acpi_evaluate_object(handle, method, ¶ms, resultp); - - switch (res_type) { - case 'd': /* int */ - if (res) - *(int *)res = out_obj.integer.value; - success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER; - break; - case 'v': /* void */ - success = status == AE_OK; - break; - /* add more types as needed */ - default: - printk(IBM_ERR "acpi_evalf() called " - "with invalid format character '%c'\n", res_type); - return 0; - } - - if (!success && !quiet) - printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", - method, fmt0, status); - - return success; -} - -static void __unused acpi_print_int(acpi_handle handle, char *method) -{ - int i; - - if (acpi_evalf(handle, &i, method, "d")) - printk(IBM_INFO "%s = 0x%x\n", method, i); - else - printk(IBM_ERR "error calling %s\n", method); -} - -static int acpi_ec_read(int i, u8 * p) -{ - int v; - - if (ecrd_handle) { - if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) - return 0; - *p = v; - } else { - if (ec_read(i, p) < 0) - return 0; - } - - return 1; -} - -static int acpi_ec_write(int i, u8 v) -{ - if (ecwr_handle) { - if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) - return 0; - } else { - if (ec_write(i, v) < 0) - return 0; - } - - return 1; -} - -static int _sta(acpi_handle handle) -{ - int status; - - if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) - status = 0; - - return status; -} - -/************************************************************************* - * ACPI device model - */ - -static void __init ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path) -{ - int i; - acpi_status status; - - for (i = 0; i < num_paths; i++) { - status = acpi_get_handle(parent, paths[i], handle); - if (ACPI_SUCCESS(status)) { - *path = paths[i]; - return; - } - } - - *handle = NULL; -} - -static void dispatch_notify(acpi_handle handle, u32 event, void *data) -{ - struct ibm_struct *ibm = data; - - if (!ibm || !ibm->notify) - return; - - ibm->notify(ibm, event); -} - -static int __init setup_notify(struct ibm_struct *ibm) -{ - acpi_status status; - int ret; - - if (!*ibm->handle) - return 0; - - ret = acpi_bus_get_device(*ibm->handle, &ibm->device); - if (ret < 0) { - printk(IBM_ERR "%s device not present\n", ibm->name); - return -ENODEV; - } - - acpi_driver_data(ibm->device) = ibm; - sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); - - status = acpi_install_notify_handler(*ibm->handle, ibm->type, - dispatch_notify, ibm); - if (ACPI_FAILURE(status)) { - if (status == AE_ALREADY_EXISTS) { - printk(IBM_NOTICE "another device driver is already handling %s events\n", - ibm->name); - } else { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); - } - return -ENODEV; - } - ibm->notify_installed = 1; - return 0; -} - -static int __init ibm_device_add(struct acpi_device *device) -{ - return 0; -} - -static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) -{ - int ret; - - ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); - if (!ibm->driver) { - printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); - return -1; - } - - sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); - ibm->driver->ids = ibm->hid; - ibm->driver->ops.add = &ibm_device_add; - - ret = acpi_bus_register_driver(ibm->driver); - if (ret < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", - ibm->hid, ret); - kfree(ibm->driver); - } - - return ret; -} - - -/**************************************************************************** - **************************************************************************** - * - * Procfs Helpers - * - **************************************************************************** - ****************************************************************************/ - -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - struct ibm_struct *ibm = data; - int len; - - if (!ibm || !ibm->read) - return -EINVAL; - - len = ibm->read(page); - if (len < 0) - return len; - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data) -{ - struct ibm_struct *ibm = data; - char *kernbuf; - int ret; - - if (!ibm || !ibm->write) - return -EINVAL; - - kernbuf = kmalloc(count + 2, GFP_KERNEL); - if (!kernbuf) - return -ENOMEM; - - if (copy_from_user(kernbuf, userbuf, count)) { - kfree(kernbuf); - return -EFAULT; - } - - kernbuf[count] = 0; - strcat(kernbuf, ","); - ret = ibm->write(kernbuf); - if (ret == 0) - ret = count; - - kfree(kernbuf); - - return ret; -} - -static char *next_cmd(char **cmds) -{ - char *start = *cmds; - char *end; - - while ((end = strchr(start, ',')) && end == start) - start = end + 1; - - if (!end) - return NULL; - - *end = 0; - *cmds = end + 1; - return start; -} - - -/**************************************************************************** - **************************************************************************** - * - * Subdrivers - * - **************************************************************************** - ****************************************************************************/ - -/************************************************************************* - * ibm-acpi init subdriver - */ - -static int ibm_acpi_driver_init(void) -{ - printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); - printk(IBM_INFO "%s\n", IBM_URL); - - if (ibm_thinkpad_ec_found) - printk(IBM_INFO "ThinkPad EC firmware %s\n", - ibm_thinkpad_ec_found); - - return 0; -} - -static int ibm_acpi_driver_read(char *p) -{ - int len = 0; - - len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC); - len += sprintf(p + len, "version:\t%s\n", IBM_VERSION); - - return len; -} - -/************************************************************************* - * Hotkey subdriver - */ - -static int hotkey_supported; -static int hotkey_mask_supported; -static int hotkey_orig_status; -static int hotkey_orig_mask; - -static int hotkey_init(void) -{ - /* hotkey not supported on 570 */ - hotkey_supported = hkey_handle != NULL; - - if (hotkey_supported) { - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24 */ - hotkey_mask_supported = - acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); - - if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) - return -ENODEV; - } - - return 0; -} - -static void hotkey_exit(void) -{ - if (hotkey_supported) - hotkey_set(hotkey_orig_status, hotkey_orig_mask); -} - -static void hotkey_notify(struct ibm_struct *ibm, u32 event) -{ - int hkey; - - if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) - acpi_bus_generate_event(ibm->device, event, hkey); - else { - printk(IBM_ERR "unknown hotkey event %d\n", event); - acpi_bus_generate_event(ibm->device, event, 0); - } -} - -static int hotkey_get(int *status, int *mask) -{ - if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) - return 0; - - if (hotkey_mask_supported) - if (!acpi_evalf(hkey_handle, mask, "DHKN", "d")) - return 0; - - return 1; -} - -static int hotkey_set(int status, int mask) -{ - int i; - - if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status)) - return 0; - - if (hotkey_mask_supported) - for (i = 0; i < 32; i++) { - int bit = ((1 << i) & mask) != 0; - if (!acpi_evalf(hkey_handle, - NULL, "MHKM", "vdd", i + 1, bit)) - return 0; - } - - return 1; -} - -static int hotkey_read(char *p) -{ - int status, mask; - int len = 0; - - if (!hotkey_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - if (!hotkey_get(&status, &mask)) - return -EIO; - - len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0)); - if (hotkey_mask_supported) { - len += sprintf(p + len, "mask:\t\t0x%04x\n", mask); - len += sprintf(p + len, - "commands:\tenable, disable, reset, \n"); - } else { - len += sprintf(p + len, "mask:\t\tnot supported\n"); - len += sprintf(p + len, "commands:\tenable, disable, reset\n"); - } - - return len; -} - -static int hotkey_write(char *buf) -{ - int status, mask; - char *cmd; - int do_cmd = 0; - - if (!hotkey_supported) - return -ENODEV; - - if (!hotkey_get(&status, &mask)) - return -EIO; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "enable") == 0) { - status = 1; - } else if (strlencmp(cmd, "disable") == 0) { - status = 0; - } else if (strlencmp(cmd, "reset") == 0) { - status = hotkey_orig_status; - mask = hotkey_orig_mask; - } else if (sscanf(cmd, "0x%x", &mask) == 1) { - /* mask set */ - } else if (sscanf(cmd, "%x", &mask) == 1) { - /* mask set */ - } else - return -EINVAL; - do_cmd = 1; - } - - if (do_cmd && !hotkey_set(status, mask)) - return -EIO; - - return 0; -} - -/************************************************************************* - * Bluetooth subdriver - */ - -static int bluetooth_supported; - -static int bluetooth_init(void) -{ - /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - G4x, R30, R31, R40e, R50e, T20-22, X20-21 */ - bluetooth_supported = hkey_handle && - acpi_evalf(hkey_handle, NULL, "GBDC", "qv"); - - return 0; -} - -static int bluetooth_status(void) -{ - int status; - - if (!bluetooth_supported || - !acpi_evalf(hkey_handle, &status, "GBDC", "d")) - status = 0; - - return status; -} - -static int bluetooth_read(char *p) -{ - int len = 0; - int status = bluetooth_status(); - - if (!bluetooth_supported) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else if (!(status & 1)) - len += sprintf(p + len, "status:\t\tnot installed\n"); - else { - len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1)); - len += sprintf(p + len, "commands:\tenable, disable\n"); - } - - return len; -} - -static int bluetooth_write(char *buf) -{ - int status = bluetooth_status(); - char *cmd; - int do_cmd = 0; - - if (!bluetooth_supported) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "enable") == 0) { - status |= 2; - } else if (strlencmp(cmd, "disable") == 0) { - status &= ~2; - } else - return -EINVAL; - do_cmd = 1; - } - - if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status)) - return -EIO; - - return 0; -} - -/************************************************************************* - * Wan subdriver - */ - -static int wan_supported; - -static int wan_init(void) -{ - wan_supported = hkey_handle && - acpi_evalf(hkey_handle, NULL, "GWAN", "qv"); - - return 0; -} - -static int wan_status(void) -{ - int status; - - if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d")) - status = 0; - - return status; -} - -static int wan_read(char *p) -{ - int len = 0; - int status = wan_status(); - - if (!wan_supported) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else if (!(status & 1)) - len += sprintf(p + len, "status:\t\tnot installed\n"); - else { - len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1)); - len += sprintf(p + len, "commands:\tenable, disable\n"); - } - - return len; -} - -static int wan_write(char *buf) -{ - int status = wan_status(); - char *cmd; - int do_cmd = 0; - - if (!wan_supported) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "enable") == 0) { - status |= 2; - } else if (strlencmp(cmd, "disable") == 0) { - status &= ~2; - } else - return -EINVAL; - do_cmd = 1; - } - - if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status)) - return -EIO; - - return 0; -} - -/************************************************************************* - * Video subdriver - */ - -static enum video_access_mode video_supported; -static int video_orig_autosw; - -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ - -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ - -static int video_init(void) -{ - int ivga; - - if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga) - /* G41, assume IVGA doesn't change */ - vid_handle = vid2_handle; - - if (!vid_handle) - /* video switching not supported on R30, R31 */ - video_supported = IBMACPI_VIDEO_NONE; - else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd")) - /* 570 */ - video_supported = IBMACPI_VIDEO_570; - else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd")) - /* 600e/x, 770e, 770x */ - video_supported = IBMACPI_VIDEO_770; - else - /* all others */ - video_supported = IBMACPI_VIDEO_NEW; - - return 0; -} - -static void video_exit(void) -{ - acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); -} - -static int video_status(void) -{ - int status = 0; - int i; - - if (video_supported == IBMACPI_VIDEO_570) { - if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87)) - status = i & 3; - } else if (video_supported == IBMACPI_VIDEO_770) { - if (acpi_evalf(NULL, &i, "\\VCDL", "d")) - status |= 0x01 * i; - if (acpi_evalf(NULL, &i, "\\VCDC", "d")) - status |= 0x02 * i; - } else if (video_supported == IBMACPI_VIDEO_NEW) { - acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1); - if (acpi_evalf(NULL, &i, "\\VCDC", "d")) - status |= 0x02 * i; - - acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0); - if (acpi_evalf(NULL, &i, "\\VCDL", "d")) - status |= 0x01 * i; - if (acpi_evalf(NULL, &i, "\\VCDD", "d")) - status |= 0x08 * i; - } - - return status; -} - -static int video_autosw(void) -{ - int autosw = 0; - - if (video_supported == IBMACPI_VIDEO_570) - acpi_evalf(vid_handle, &autosw, "SWIT", "d"); - else if (video_supported == IBMACPI_VIDEO_770 || - video_supported == IBMACPI_VIDEO_NEW) - acpi_evalf(vid_handle, &autosw, "^VDEE", "d"); - - return autosw & 1; -} - -static int video_switch(void) -{ - int autosw = video_autosw(); - int ret; - - if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) - return -EIO; - ret = video_supported == IBMACPI_VIDEO_570 ? - acpi_evalf(ec_handle, NULL, "_Q16", "v") : - acpi_evalf(vid_handle, NULL, "VSWT", "v"); - acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw); - - return ret; -} - -static int video_expand(void) -{ - if (video_supported == IBMACPI_VIDEO_570) - return acpi_evalf(ec_handle, NULL, "_Q17", "v"); - else if (video_supported == IBMACPI_VIDEO_770) - return acpi_evalf(vid_handle, NULL, "VEXP", "v"); - else - return acpi_evalf(NULL, NULL, "\\VEXP", "v"); -} - -static int video_switch2(int status) -{ - int ret; - - if (video_supported == IBMACPI_VIDEO_570) { - ret = acpi_evalf(NULL, NULL, - "\\_SB.PHS2", "vdd", 0x8b, status | 0x80); - } else if (video_supported == IBMACPI_VIDEO_770) { - int autosw = video_autosw(); - if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) - return -EIO; - - ret = acpi_evalf(vid_handle, NULL, - "ASWT", "vdd", status * 0x100, 0); - - acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw); - } else { - ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) && - acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1); - } - - return ret; -} - -static int video_read(char *p) -{ - int status = video_status(); - int autosw = video_autosw(); - int len = 0; - - if (!video_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); - len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); - len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); - len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); - len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == IBMACPI_VIDEO_NEW) - len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); - len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); - len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); - - return len; -} - -static int video_write(char *buf) -{ - char *cmd; - int enable, disable, status; - - if (!video_supported) - return -ENODEV; - - enable = disable = 0; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "lcd_enable") == 0) { - enable |= 0x01; - } else if (strlencmp(cmd, "lcd_disable") == 0) { - disable |= 0x01; - } else if (strlencmp(cmd, "crt_enable") == 0) { - enable |= 0x02; - } else if (strlencmp(cmd, "crt_disable") == 0) { - disable |= 0x02; - } else if (video_supported == IBMACPI_VIDEO_NEW && - strlencmp(cmd, "dvi_enable") == 0) { - enable |= 0x08; - } else if (video_supported == IBMACPI_VIDEO_NEW && - strlencmp(cmd, "dvi_disable") == 0) { - disable |= 0x08; - } else if (strlencmp(cmd, "auto_enable") == 0) { - if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) - return -EIO; - } else if (strlencmp(cmd, "auto_disable") == 0) { - if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0)) - return -EIO; - } else if (strlencmp(cmd, "video_switch") == 0) { - if (!video_switch()) - return -EIO; - } else if (strlencmp(cmd, "expand_toggle") == 0) { - if (!video_expand()) - return -EIO; - } else - return -EINVAL; - } - - if (enable || disable) { - status = (video_status() & 0x0f & ~disable) | enable; - if (!video_switch2(status)) - return -EIO; - } - - return 0; -} - -/************************************************************************* - * Light (thinklight) subdriver - */ - -static int light_supported; -static int light_status_supported; - -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ - -static int light_init(void) -{ - /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ - light_supported = (cmos_handle || lght_handle) && !ledb_handle; - - if (light_supported) - /* light status not supported on - 570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */ - light_status_supported = acpi_evalf(ec_handle, NULL, - "KBLT", "qv"); - - return 0; -} - -static int light_read(char *p) -{ - int len = 0; - int status = 0; - - if (!light_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - } else if (!light_status_supported) { - len += sprintf(p + len, "status:\t\tunknown\n"); - len += sprintf(p + len, "commands:\ton, off\n"); - } else { - if (!acpi_evalf(ec_handle, &status, "KBLT", "d")) - return -EIO; - len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0)); - len += sprintf(p + len, "commands:\ton, off\n"); - } - - return len; -} - -static int light_write(char *buf) -{ - int cmos_cmd, lght_cmd; - char *cmd; - int success; - - if (!light_supported) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "on") == 0) { - cmos_cmd = 0x0c; - lght_cmd = 1; - } else if (strlencmp(cmd, "off") == 0) { - cmos_cmd = 0x0d; - lght_cmd = 0; - } else - return -EINVAL; - - success = cmos_handle ? - acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) : - acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd); - if (!success) - return -EIO; - } - - return 0; -} - -/************************************************************************* - * Dock subdriver - */ - -/* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ - -#ifdef CONFIG_ACPI_IBM_DOCK - -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ - "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ - "\\_SB.PCI0.PCI1.DOCK", /* all others */ - "\\_SB.PCI.ISA.SLCE", /* 570 */ - ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ - -#define dock_docked() (_sta(dock_handle) & 1) - -static void dock_notify(struct ibm_struct *ibm, u32 event) -{ - int docked = dock_docked(); - int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); - - if (event == 1 && !pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 1 && pci) /* 570 */ - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else if (event == 3 && docked) - acpi_bus_generate_event(ibm->device, event, 1); /* button */ - else if (event == 3 && !docked) - acpi_bus_generate_event(ibm->device, event, 2); /* undock */ - else if (event == 0 && docked) - acpi_bus_generate_event(ibm->device, event, 3); /* dock */ - else { - printk(IBM_ERR "unknown dock event %d, status %d\n", - event, _sta(dock_handle)); - acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ - } -} - -static int dock_read(char *p) -{ - int len = 0; - int docked = dock_docked(); - - if (!dock_handle) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else if (!docked) - len += sprintf(p + len, "status:\t\tundocked\n"); - else { - len += sprintf(p + len, "status:\t\tdocked\n"); - len += sprintf(p + len, "commands:\tdock, undock\n"); - } - - return len; -} - -static int dock_write(char *buf) -{ - char *cmd; - - if (!dock_docked()) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "undock") == 0) { - if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) || - !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1)) - return -EIO; - } else if (strlencmp(cmd, "dock") == 0) { - if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1)) - return -EIO; - } else - return -EINVAL; - } - - return 0; -} - -#endif /* CONFIG_ACPI_IBM_DOCK */ - -/************************************************************************* - * Bay subdriver - */ - -#ifdef CONFIG_ACPI_IBM_BAY -static int bay_status_supported; -static int bay_status2_supported; -static int bay_eject_supported; -static int bay_eject2_supported; - -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ - "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ - "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ - "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ - ); /* A21e, R30, R31 */ -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ - "_EJ0", /* all others */ - ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ - "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ - ); /* all others */ -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ - "_EJ0", /* 770x */ - ); /* all others */ - -static int bay_init(void) -{ - bay_status_supported = bay_handle && - acpi_evalf(bay_handle, NULL, "_STA", "qv"); - bay_status2_supported = bay2_handle && - acpi_evalf(bay2_handle, NULL, "_STA", "qv"); - - bay_eject_supported = bay_handle && bay_ej_handle && - (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental); - bay_eject2_supported = bay2_handle && bay2_ej_handle && - (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental); - - return 0; -} - -static void bay_notify(struct ibm_struct *ibm, u32 event) -{ - acpi_bus_generate_event(ibm->device, event, 0); -} - -#define bay_occupied(b) (_sta(b##_handle) & 1) - -static int bay_read(char *p) -{ - int len = 0; - int occupied = bay_occupied(bay); - int occupied2 = bay_occupied(bay2); - int eject, eject2; - - len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ? - (occupied ? "occupied" : "unoccupied") : - "not supported"); - if (bay_status2_supported) - len += sprintf(p + len, "status2:\t%s\n", occupied2 ? - "occupied" : "unoccupied"); - - eject = bay_eject_supported && occupied; - eject2 = bay_eject2_supported && occupied2; - - if (eject && eject2) - len += sprintf(p + len, "commands:\teject, eject2\n"); - else if (eject) - len += sprintf(p + len, "commands:\teject\n"); - else if (eject2) - len += sprintf(p + len, "commands:\teject2\n"); - - return len; -} - -static int bay_write(char *buf) -{ - char *cmd; - - if (!bay_eject_supported && !bay_eject2_supported) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (bay_eject_supported && strlencmp(cmd, "eject") == 0) { - if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1)) - return -EIO; - } else if (bay_eject2_supported && - strlencmp(cmd, "eject2") == 0) { - if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1)) - return -EIO; - } else - return -EINVAL; - } - - return 0; -} -#endif /* CONFIG_ACPI_IBM_BAY */ - -/************************************************************************* - * CMOS subdriver - */ - -static int cmos_eval(int cmos_cmd) -{ - if (cmos_handle) - return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); - else - return 1; -} - -static int cmos_read(char *p) -{ - int len = 0; - - /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - R30, R31, T20-22, X20-21 */ - if (!cmos_handle) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else { - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "commands:\t ( is 0-21)\n"); - } - - return len; -} - -static int cmos_write(char *buf) -{ - char *cmd; - int cmos_cmd; - - if (!cmos_handle) - return -EINVAL; - - while ((cmd = next_cmd(&buf))) { - if (sscanf(cmd, "%u", &cmos_cmd) == 1 && - cmos_cmd >= 0 && cmos_cmd <= 21) { - /* cmos_cmd set */ - } else - return -EINVAL; - - if (!cmos_eval(cmos_cmd)) - return -EIO; - } - - return 0; -} - - -/************************************************************************* - * LED subdriver - */ - -static enum led_access_mode led_supported; - -IBM_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - "LED", /* all others */ - ); /* R30, R31 */ - -static int led_init(void) -{ - if (!led_handle) - /* led not supported on R30, R31 */ - led_supported = IBMACPI_LED_NONE; - else if (strlencmp(led_path, "SLED") == 0) - /* 570 */ - led_supported = IBMACPI_LED_570; - else if (strlencmp(led_path, "SYSL") == 0) - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - led_supported = IBMACPI_LED_OLD; - else - /* all others */ - led_supported = IBMACPI_LED_NEW; - - return 0; -} - -#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking")) - -static int led_read(char *p) -{ - int len = 0; - - if (!led_supported) { - len += sprintf(p + len, "status:\t\tnot supported\n"); - return len; - } - len += sprintf(p + len, "status:\t\tsupported\n"); - - if (led_supported == IBMACPI_LED_570) { - /* 570 */ - int i, status; - for (i = 0; i < 8; i++) { - if (!acpi_evalf(ec_handle, - &status, "GLED", "dd", 1 << i)) - return -EIO; - len += sprintf(p + len, "%d:\t\t%s\n", - i, led_status(status)); - } - } - - len += sprintf(p + len, "commands:\t" - " on, off, blink ( is 0-7)\n"); - - return len; -} - -/* off, on, blink */ -static const int led_sled_arg1[] = { 0, 1, 3 }; -static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ -static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ -static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; - -static int led_write(char *buf) -{ - char *cmd; - int led, ind, ret; - - if (!led_supported) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7) - return -EINVAL; - - if (strstr(cmd, "off")) { - ind = 0; - } else if (strstr(cmd, "on")) { - ind = 1; - } else if (strstr(cmd, "blink")) { - ind = 2; - } else - return -EINVAL; - - if (led_supported == IBMACPI_LED_570) { - /* 570 */ - led = 1 << led; - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_sled_arg1[ind])) - return -EIO; - } else if (led_supported == IBMACPI_LED_OLD) { - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - led = 1 << led; - ret = ec_write(IBMACPI_LED_EC_HLMS, led); - if (ret >= 0) - ret = - ec_write(IBMACPI_LED_EC_HLBL, - led * led_exp_hlbl[ind]); - if (ret >= 0) - ret = - ec_write(IBMACPI_LED_EC_HLCL, - led * led_exp_hlcl[ind]); - if (ret < 0) - return ret; - } else { - /* all others */ - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_led_arg1[ind])) - return -EIO; - } - } - - return 0; -} - -/************************************************************************* - * Beep subdriver - */ - -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ - -static int beep_read(char *p) -{ - int len = 0; - - if (!beep_handle) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else { - len += sprintf(p + len, "status:\t\tsupported\n"); - len += sprintf(p + len, "commands:\t ( is 0-17)\n"); - } - - return len; -} - -static int beep_write(char *buf) -{ - char *cmd; - int beep_cmd; - - if (!beep_handle) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (sscanf(cmd, "%u", &beep_cmd) == 1 && - beep_cmd >= 0 && beep_cmd <= 17) { - /* beep_cmd set */ - } else - return -EINVAL; - if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0)) - return -EIO; - } - - return 0; -} - -/************************************************************************* - * Thermal subdriver - */ - -static enum thermal_access_mode thermal_read_mode; - -static int thermal_init(void) -{ - u8 t, ta1, ta2; - int i; - int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv"); - - if (ibm_thinkpad_ec_found && experimental) { - /* - * Direct EC access mode: sensors at registers - * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for - * non-implemented, thermal sensors return 0x80 when - * not available - */ - - ta1 = ta2 = 0; - for (i = 0; i < 8; i++) { - if (likely(acpi_ec_read(0x78 + i, &t))) { - ta1 |= t; - } else { - ta1 = 0; - break; - } - if (likely(acpi_ec_read(0xC0 + i, &t))) { - ta2 |= t; - } else { - ta1 = 0; - break; - } - } - if (ta1 == 0) { - /* This is sheer paranoia, but we handle it anyway */ - if (acpi_tmp7) { - printk(IBM_ERR - "ThinkPad ACPI EC access misbehaving, " - "falling back to ACPI TMPx access mode\n"); - thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; - } else { - printk(IBM_ERR - "ThinkPad ACPI EC access misbehaving, " - "disabling thermal sensors access\n"); - thermal_read_mode = IBMACPI_THERMAL_NONE; - } - } else { - thermal_read_mode = - (ta2 != 0) ? - IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8; - } - } else if (acpi_tmp7) { - if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) { - /* 600e/x, 770e, 770x */ - thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT; - } else { - /* Standard ACPI TMPx access, max 8 sensors */ - thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; - } - } else { - /* temperatures not supported on 570, G4x, R30, R31, R32 */ - thermal_read_mode = IBMACPI_THERMAL_NONE; - } - - return 0; -} - -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) -{ - int i, t; - s8 tmp; - char tmpi[] = "TMPi"; - - if (!s) - return -EINVAL; - - switch (thermal_read_mode) { -#if IBMACPI_MAX_THERMAL_SENSORS >= 16 - case IBMACPI_THERMAL_TPEC_16: - for (i = 0; i < 8; i++) { - if (!acpi_ec_read(0xC0 + i, &tmp)) - return -EIO; - s->temp[i + 8] = tmp * 1000; - } - /* fallthrough */ -#endif - case IBMACPI_THERMAL_TPEC_8: - for (i = 0; i < 8; i++) { - if (!acpi_ec_read(0x78 + i, &tmp)) - return -EIO; - s->temp[i] = tmp * 1000; - } - return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8; - - case IBMACPI_THERMAL_ACPI_UPDT: - if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) - return -EIO; - for (i = 0; i < 8; i++) { - tmpi[3] = '0' + i; - if (!acpi_evalf(ec_handle, &t, tmpi, "d")) - return -EIO; - s->temp[i] = (t - 2732) * 100; - } - return 8; - - case IBMACPI_THERMAL_ACPI_TMP07: - for (i = 0; i < 8; i++) { - tmpi[3] = '0' + i; - if (!acpi_evalf(ec_handle, &t, tmpi, "d")) - return -EIO; - s->temp[i] = t * 1000; - } - return 8; - - case IBMACPI_THERMAL_NONE: - default: - return 0; - } -} - -static int thermal_read(char *p) -{ - int len = 0; - int n, i; - struct ibm_thermal_sensors_struct t; - - n = thermal_get_sensors(&t); - if (unlikely(n < 0)) - return n; - - len += sprintf(p + len, "temperatures:\t"); - - if (n > 0) { - for (i = 0; i < (n - 1); i++) - len += sprintf(p + len, "%d ", t.temp[i] / 1000); - len += sprintf(p + len, "%d\n", t.temp[i] / 1000); - } else - len += sprintf(p + len, "not supported\n"); - - return len; -} - -/************************************************************************* - * EC Dump subdriver - */ - -static u8 ecdump_regs[256]; - -static int ecdump_read(char *p) -{ - int len = 0; - int i, j; - u8 v; - - len += sprintf(p + len, "EC " - " +00 +01 +02 +03 +04 +05 +06 +07" - " +08 +09 +0a +0b +0c +0d +0e +0f\n"); - for (i = 0; i < 256; i += 16) { - len += sprintf(p + len, "EC 0x%02x:", i); - for (j = 0; j < 16; j++) { - if (!acpi_ec_read(i + j, &v)) - break; - if (v != ecdump_regs[i + j]) - len += sprintf(p + len, " *%02x", v); - else - len += sprintf(p + len, " %02x", v); - ecdump_regs[i + j] = v; - } - len += sprintf(p + len, "\n"); - if (j != 16) - break; - } - - /* These are way too dangerous to advertise openly... */ -#if 0 - len += sprintf(p + len, "commands:\t0x 0x" - " ( is 00-ff, is 00-ff)\n"); - len += sprintf(p + len, "commands:\t0x " - " ( is 00-ff, is 0-255)\n"); -#endif - return len; -} - -static int ecdump_write(char *buf) -{ - char *cmd; - int i, v; - - while ((cmd = next_cmd(&buf))) { - if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) { - /* i and v set */ - } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) { - /* i and v set */ - } else - return -EINVAL; - if (i >= 0 && i < 256 && v >= 0 && v < 256) { - if (!acpi_ec_write(i, v)) - return -EIO; - } else - return -EINVAL; - } - - return 0; -} - -/************************************************************************* - * Backlight/brightness subdriver - */ - -static struct backlight_device *ibm_backlight_device = NULL; - -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -static int brightness_init(void) -{ - int b; - - b = brightness_get(NULL); - if (b < 0) - return b; - - ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, - &ibm_backlight_data); - if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); - return PTR_ERR(ibm_backlight_device); - } - - ibm_backlight_device->props.max_brightness = 7; - ibm_backlight_device->props.brightness = b; - backlight_update_status(ibm_backlight_device); - - return 0; -} - -static void brightness_exit(void) -{ - if (ibm_backlight_device) { - backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; - } -} - -static int brightness_update_status(struct backlight_device *bd) -{ - return brightness_set( - (bd->props.fb_blank == FB_BLANK_UNBLANK && - bd->props.power == FB_BLANK_UNBLANK) ? - bd->props.brightness : 0); -} - -static int brightness_get(struct backlight_device *bd) -{ - u8 level; - if (!acpi_ec_read(brightness_offset, &level)) - return -EIO; - - level &= 0x7; - - return level; -} - -static int brightness_set(int value) -{ - int cmos_cmd, inc, i; - int current_value = brightness_get(NULL); - - value &= 7; - - cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; - inc = value > current_value ? 1 : -1; - for (i = current_value; i != value; i += inc) { - if (!cmos_eval(cmos_cmd)) - return -EIO; - if (!acpi_ec_write(brightness_offset, i + inc)) - return -EIO; - } - - return 0; -} - -static int brightness_read(char *p) -{ - int len = 0; - int level; - - if ((level = brightness_get(NULL)) < 0) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); - len += sprintf(p + len, "commands:\tup, down\n"); - len += sprintf(p + len, "commands:\tlevel " - " ( is 0-7)\n"); - } - - return len; -} - -static int brightness_write(char *buf) -{ - int level; - int new_level; - char *cmd; - - while ((cmd = next_cmd(&buf))) { - if ((level = brightness_get(NULL)) < 0) - return level; - level &= 7; - - if (strlencmp(cmd, "up") == 0) { - new_level = level == 7 ? 7 : level + 1; - } else if (strlencmp(cmd, "down") == 0) { - new_level = level == 0 ? 0 : level - 1; - } else if (sscanf(cmd, "level %d", &new_level) == 1 && - new_level >= 0 && new_level <= 7) { - /* new_level set */ - } else - return -EINVAL; - - brightness_set(new_level); - } - - return 0; -} - -/************************************************************************* - * Volume subdriver - */ - -static int volume_read(char *p) -{ - int len = 0; - u8 level; - - if (!acpi_ec_read(volume_offset, &level)) { - len += sprintf(p + len, "level:\t\tunreadable\n"); - } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0xf); - len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6)); - len += sprintf(p + len, "commands:\tup, down, mute\n"); - len += sprintf(p + len, "commands:\tlevel " - " ( is 0-15)\n"); - } - - return len; -} - -static int volume_write(char *buf) -{ - int cmos_cmd, inc, i; - u8 level, mute; - int new_level, new_mute; - char *cmd; - - while ((cmd = next_cmd(&buf))) { - if (!acpi_ec_read(volume_offset, &level)) - return -EIO; - new_mute = mute = level & 0x40; - new_level = level = level & 0xf; - - if (strlencmp(cmd, "up") == 0) { - if (mute) - new_mute = 0; - else - new_level = level == 15 ? 15 : level + 1; - } else if (strlencmp(cmd, "down") == 0) { - if (mute) - new_mute = 0; - else - new_level = level == 0 ? 0 : level - 1; - } else if (sscanf(cmd, "level %d", &new_level) == 1 && - new_level >= 0 && new_level <= 15) { - /* new_level set */ - } else if (strlencmp(cmd, "mute") == 0) { - new_mute = 0x40; - } else - return -EINVAL; - - if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; - inc = new_level > level ? 1 : -1; - - if (mute && (!cmos_eval(cmos_cmd) || - !acpi_ec_write(volume_offset, level))) - return -EIO; - - for (i = level; i != new_level; i += inc) - if (!cmos_eval(cmos_cmd) || - !acpi_ec_write(volume_offset, i + inc)) - return -EIO; - - if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || - !acpi_ec_write(volume_offset, - new_level + mute))) - return -EIO; - } - - if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; - - if (!cmos_eval(cmos_cmd) || - !acpi_ec_write(volume_offset, level + new_mute)) - return -EIO; - } - } - - return 0; -} - - -/************************************************************************* - * Fan subdriver - */ - -/* - * FAN ACCESS MODES - * - * IBMACPI_FAN_RD_ACPI_GFAN: - * ACPI GFAN method: returns fan level - * - * see IBMACPI_FAN_WR_ACPI_SFAN - * EC 0x2f not available if GFAN exists - * - * IBMACPI_FAN_WR_ACPI_SFAN: - * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) - * - * EC 0x2f might be available *for reading*, but never for writing. - * - * IBMACPI_FAN_WR_TPEC: - * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported - * on almost all ThinkPads - * - * Fan speed changes of any sort (including those caused by the - * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be - * limited. - * - * Reading is not available if GFAN exists. - * Writing is not available if SFAN exists. - * - * Bits - * 7 automatic mode engaged; - * (default operation mode of the ThinkPad) - * fan level is ignored in this mode. - * 6 disengage mode (takes precedence over bit 7); - * not available on all thinkpads. May disable - * the tachometer, and speeds up fan to 100% duty-cycle, - * which speeds it up far above the standard RPM - * levels. It is not impossible that it could cause - * hardware damage. - * 5-3 unused in some models. Extra bits for fan level - * in others, but still useless as all values above - * 7 map to the same speed as level 7 in these models. - * 2-0 fan level (0..7 usually) - * 0x00 = stop - * 0x07 = max (set when temperatures critical) - * Some ThinkPads may have other levels, see - * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) - * - * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at - * boot. Apparently the EC does not intialize it, so unless ACPI DSDT - * does so, its initial value is meaningless (0x07). - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * ---- - * - * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): - * Main fan tachometer reading (in RPM) - * - * This register is present on all ThinkPads with a new-style EC, and - * it is known not to be present on the A21m/e, and T22, as there is - * something else in offset 0x84 according to the ACPI DSDT. Other - * ThinkPads from this same time period (and earlier) probably lack the - * tachometer as well. - * - * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare - * was never fixed by IBM to report the EC firmware version string - * probably support the tachometer (like the early X models), so - * detecting it is quite hard. We need more data to know for sure. - * - * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings - * might result. - * - * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this - * register is not invalidated in ThinkPads that disable tachometer - * readings. Thus, the tachometer readings go stale. - * - * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues - * - * IBMACPI_FAN_WR_ACPI_FANS: - * ThinkPad X31, X40, X41. Not available in the X60. - * - * FANS ACPI handle: takes three arguments: low speed, medium speed, - * high speed. ACPI DSDT seems to map these three speeds to levels - * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH - * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") - * - * The speeds are stored on handles - * (FANA:FAN9), (FANC:FANB), (FANE:FAND). - * - * There are three default speed sets, acessible as handles: - * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H - * - * ACPI DSDT switches which set is in use depending on various - * factors. - * - * IBMACPI_FAN_WR_TPEC is also available and should be used to - * command the fan. The X31/X40/X41 seems to have 8 fan levels, - * but the ACPI tables just mention level 7. - */ - -static enum fan_status_access_mode fan_status_access_mode; -static enum fan_control_access_mode fan_control_access_mode; -static enum fan_control_commands fan_control_commands; - -static int fan_control_status_known; -static u8 fan_control_initial_status; - -static void fan_watchdog_fire(struct work_struct *ignored); -static int fan_watchdog_maxinterval; -static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); - -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ - "\\FSPD", /* 600e/x, 770e, 770x */ - ); /* all others */ -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ - "JFNS", /* 770x-JL */ - ); /* all others */ - -static int fan_init(void) -{ - fan_status_access_mode = IBMACPI_FAN_NONE; - fan_control_access_mode = IBMACPI_FAN_WR_NONE; - fan_control_commands = 0; - fan_control_status_known = 1; - fan_watchdog_maxinterval = 0; - - if (gfan_handle) { - /* 570, 600e/x, 770e, 770x */ - fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN; - } else { - /* all other ThinkPads: note that even old-style - * ThinkPad ECs supports the fan control register */ - if (likely(acpi_ec_read(fan_status_offset, - &fan_control_initial_status))) { - fan_status_access_mode = IBMACPI_FAN_RD_TPEC; - - /* In some ThinkPads, neither the EC nor the ACPI - * DSDT initialize the fan status, and it ends up - * being set to 0x07 when it *could* be either - * 0x07 or 0x80. - * - * Enable for TP-1Y (T43), TP-78 (R51e), - * TP-76 (R52), TP-70 (T43, R52), which are known - * to be buggy. */ - if (fan_control_initial_status == 0x07 && - ibm_thinkpad_ec_found && - ((ibm_thinkpad_ec_found[0] == '1' && - ibm_thinkpad_ec_found[1] == 'Y') || - (ibm_thinkpad_ec_found[0] == '7' && - (ibm_thinkpad_ec_found[1] == '6' || - ibm_thinkpad_ec_found[1] == '8' || - ibm_thinkpad_ec_found[1] == '0')) - )) { - printk(IBM_NOTICE - "fan_init: initial fan status is " - "unknown, assuming it is in auto " - "mode\n"); - fan_control_status_known = 0; - } - } else { - printk(IBM_ERR - "ThinkPad ACPI EC access misbehaving, " - "fan status and control unavailable\n"); - return 0; - } - } - - if (sfan_handle) { - /* 570, 770x-JL */ - fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN; - fan_control_commands |= - IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE; - } else { - if (!gfan_handle) { - /* gfan without sfan means no fan control */ - /* all other models implement TP EC 0x2f control */ - - if (fans_handle) { - /* X31, X40, X41 */ - fan_control_access_mode = - IBMACPI_FAN_WR_ACPI_FANS; - fan_control_commands |= - IBMACPI_FAN_CMD_SPEED | - IBMACPI_FAN_CMD_LEVEL | - IBMACPI_FAN_CMD_ENABLE; - } else { - fan_control_access_mode = IBMACPI_FAN_WR_TPEC; - fan_control_commands |= - IBMACPI_FAN_CMD_LEVEL | - IBMACPI_FAN_CMD_ENABLE; - } - } - } - - return 0; -} - -static int fan_get_status(u8 *status) -{ - u8 s; - - /* TODO: - * Add IBMACPI_FAN_RD_ACPI_FANS ? */ - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - - if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) - return -EIO; - - if (likely(status)) - *status = s & 0x07; - - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if (unlikely(!acpi_ec_read(fan_status_offset, &s))) - return -EIO; - - if (likely(status)) - *status = s; - - break; - - default: - return -ENXIO; - } - - return 0; -} - -static void fan_exit(void) -{ - cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); -} - -static int fan_get_speed(unsigned int *speed) -{ - u8 hi, lo; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || - !acpi_ec_read(fan_rpm_offset + 1, &hi))) - return -EIO; - - if (likely(speed)) - *speed = (hi << 8) | lo; - - break; - - default: - return -ENXIO; - } - - return 0; -} - -static void fan_watchdog_fire(struct work_struct *ignored) -{ - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - if (fan_set_enable()) { - printk(IBM_ERR "fan watchdog: error while enabling fan\n"); - /* reschedule for later */ - fan_watchdog_reset(); - } -} - -static void fan_watchdog_reset(void) -{ - static int fan_watchdog_active = 0; - - if (fan_watchdog_active) - cancel_delayed_work(&fan_watchdog_task); - - if (fan_watchdog_maxinterval > 0) { - fan_watchdog_active = 1; - if (!schedule_delayed_work(&fan_watchdog_task, - msecs_to_jiffies(fan_watchdog_maxinterval - * 1000))) { - printk(IBM_ERR "failed to schedule the fan watchdog, " - "watchdog will not trigger\n"); - } - } else - fan_watchdog_active = 0; -} - -static int fan_set_level(int level) -{ - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - if (level >= 0 && level <= 7) { - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) - return -EIO; - } else - return -EINVAL; - break; - - case IBMACPI_FAN_WR_ACPI_FANS: - case IBMACPI_FAN_WR_TPEC: - if ((level != IBMACPI_FAN_EC_AUTO) && - (level != IBMACPI_FAN_EC_DISENGAGED) && - ((level < 0) || (level > 7))) - return -EINVAL; - - if (!acpi_ec_write(fan_status_offset, level)) - return -EIO; - else - fan_control_status_known = 1; - break; - - default: - return -ENXIO; - } - return 0; -} - -static int fan_set_enable(void) -{ - u8 s; - int rc; - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_FANS: - case IBMACPI_FAN_WR_TPEC: - if ((rc = fan_get_status(&s)) < 0) - return rc; - - /* Don't go out of emergency fan mode */ - if (s != 7) - s = IBMACPI_FAN_EC_AUTO; - - if (!acpi_ec_write(fan_status_offset, s)) - return -EIO; - else - fan_control_status_known = 1; - break; - - case IBMACPI_FAN_WR_ACPI_SFAN: - if ((rc = fan_get_status(&s)) < 0) - return rc; - - s &= 0x07; - - /* Set fan to at least level 4 */ - if (s < 4) - s = 4; - - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) - return -EIO; - break; - - default: - return -ENXIO; - } - return 0; -} - -static int fan_set_disable(void) -{ - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_FANS: - case IBMACPI_FAN_WR_TPEC: - if (!acpi_ec_write(fan_status_offset, 0x00)) - return -EIO; - else - fan_control_status_known = 1; - break; - - case IBMACPI_FAN_WR_ACPI_SFAN: - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) - return -EIO; - break; - - default: - return -ENXIO; - } - return 0; -} - -static int fan_set_speed(int speed) -{ - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_FANS: - if (speed >= 0 && speed <= 65535) { - if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", - speed, speed, speed)) - return -EIO; - } else - return -EINVAL; - break; - - default: - return -ENXIO; - } - return 0; -} - -static int fan_read(char *p) -{ - int len = 0; - int rc; - u8 status; - unsigned int speed = 0; - - switch (fan_status_access_mode) { - case IBMACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - len += sprintf(p + len, "status:\t\t%s\n" - "level:\t\t%d\n", - (status != 0) ? "enabled" : "disabled", status); - break; - - case IBMACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status(&status)) < 0) - return rc; - - if (unlikely(!fan_control_status_known)) { - if (status != fan_control_initial_status) - fan_control_status_known = 1; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = IBMACPI_FAN_EC_AUTO; - } - - len += sprintf(p + len, "status:\t\t%s\n", - (status != 0) ? "enabled" : "disabled"); - - /* No ThinkPad boots on disengaged mode, we can safely - * assume the tachometer is online if fan control status - * was unknown */ - if ((rc = fan_get_speed(&speed)) < 0) - return rc; - - len += sprintf(p + len, "speed:\t\t%d\n", speed); - - if (status & IBMACPI_FAN_EC_DISENGAGED) - /* Disengaged mode takes precedence */ - len += sprintf(p + len, "level:\t\tdisengaged\n"); - else if (status & IBMACPI_FAN_EC_AUTO) - len += sprintf(p + len, "level:\t\tauto\n"); - else - len += sprintf(p + len, "level:\t\t%d\n", status); - break; - - case IBMACPI_FAN_NONE: - default: - len += sprintf(p + len, "status:\t\tnot supported\n"); - } - - if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { - len += sprintf(p + len, "commands:\tlevel "); - - switch (fan_control_access_mode) { - case IBMACPI_FAN_WR_ACPI_SFAN: - len += sprintf(p + len, " ( is 0-7)\n"); - break; - - default: - len += sprintf(p + len, " ( is 0-7, " - "auto, disengaged)\n"); - break; - } - } - - if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) - len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog ( is 0 (off), " - "1-120 (seconds))\n"); - - if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) - len += sprintf(p + len, "commands:\tspeed " - " ( is 0-65535)\n"); - - return len; -} - -static int fan_write_cmd_level(const char *cmd, int *rc) -{ - int level; - - if (strlencmp(cmd, "level auto") == 0) - level = IBMACPI_FAN_EC_AUTO; - else if (strlencmp(cmd, "level disengaged") == 0) - level = IBMACPI_FAN_EC_DISENGAGED; - else if (sscanf(cmd, "level %d", &level) != 1) - return 0; - - if ((*rc = fan_set_level(level)) == -ENXIO) - printk(IBM_ERR "level command accepted for unsupported " - "access mode %d", fan_control_access_mode); - - return 1; -} - -static int fan_write_cmd_enable(const char *cmd, int *rc) -{ - if (strlencmp(cmd, "enable") != 0) - return 0; - - if ((*rc = fan_set_enable()) == -ENXIO) - printk(IBM_ERR "enable command accepted for unsupported " - "access mode %d", fan_control_access_mode); - - return 1; -} - -static int fan_write_cmd_disable(const char *cmd, int *rc) -{ - if (strlencmp(cmd, "disable") != 0) - return 0; - - if ((*rc = fan_set_disable()) == -ENXIO) - printk(IBM_ERR "disable command accepted for unsupported " - "access mode %d", fan_control_access_mode); - - return 1; -} - -static int fan_write_cmd_speed(const char *cmd, int *rc) -{ - int speed; - - /* TODO: - * Support speed ? */ - - if (sscanf(cmd, "speed %d", &speed) != 1) - return 0; - - if ((*rc = fan_set_speed(speed)) == -ENXIO) - printk(IBM_ERR "speed command accepted for unsupported " - "access mode %d", fan_control_access_mode); - - return 1; -} - -static int fan_write_cmd_watchdog(const char *cmd, int *rc) -{ - int interval; - - if (sscanf(cmd, "watchdog %d", &interval) != 1) - return 0; - - if (interval < 0 || interval > 120) - *rc = -EINVAL; - else - fan_watchdog_maxinterval = interval; - - return 1; -} - -static int fan_write(char *buf) -{ - char *cmd; - int rc = 0; - - while (!rc && (cmd = next_cmd(&buf))) { - if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) && - fan_write_cmd_level(cmd, &rc)) && - !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) && - (fan_write_cmd_enable(cmd, &rc) || - fan_write_cmd_disable(cmd, &rc) || - fan_write_cmd_watchdog(cmd, &rc))) && - !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) && - fan_write_cmd_speed(cmd, &rc)) - ) - rc = -EINVAL; - else if (!rc) - fan_watchdog_reset(); - } - - return rc; -} - -/**************************************************************************** - **************************************************************************** - * - * Infrastructure - * - **************************************************************************** - ****************************************************************************/ - -/* /proc support */ -static struct proc_dir_entry *proc_dir = NULL; - -/* Subdriver registry */ -static struct ibm_struct ibms[] = { - { - .name = "driver", - .init = ibm_acpi_driver_init, - .read = ibm_acpi_driver_read, - }, - { - .name = "hotkey", - .hid = IBM_HKEY_HID, - .init = hotkey_init, - .read = hotkey_read, - .write = hotkey_write, - .exit = hotkey_exit, - .notify = hotkey_notify, - .handle = &hkey_handle, - .type = ACPI_DEVICE_NOTIFY, - }, - { - .name = "bluetooth", - .init = bluetooth_init, - .read = bluetooth_read, - .write = bluetooth_write, - }, - { - .name = "wan", - .init = wan_init, - .read = wan_read, - .write = wan_write, - .experimental = 1, - }, - { - .name = "video", - .init = video_init, - .read = video_read, - .write = video_write, - .exit = video_exit, - }, - { - .name = "light", - .init = light_init, - .read = light_read, - .write = light_write, - }, -#ifdef CONFIG_ACPI_IBM_DOCK - { - .name = "dock", - .read = dock_read, - .write = dock_write, - .notify = dock_notify, - .handle = &dock_handle, - .type = ACPI_SYSTEM_NOTIFY, - }, - { - .name = "dock", - .hid = IBM_PCI_HID, - .notify = dock_notify, - .handle = &pci_handle, - .type = ACPI_SYSTEM_NOTIFY, - }, -#endif -#ifdef CONFIG_ACPI_IBM_BAY - { - .name = "bay", - .init = bay_init, - .read = bay_read, - .write = bay_write, - .notify = bay_notify, - .handle = &bay_handle, - .type = ACPI_SYSTEM_NOTIFY, - }, -#endif /* CONFIG_ACPI_IBM_BAY */ - { - .name = "cmos", - .read = cmos_read, - .write = cmos_write, - }, - { - .name = "led", - .init = led_init, - .read = led_read, - .write = led_write, - }, - { - .name = "beep", - .read = beep_read, - .write = beep_write, - }, - { - .name = "thermal", - .init = thermal_init, - .read = thermal_read, - }, - { - .name = "ecdump", - .read = ecdump_read, - .write = ecdump_write, - .experimental = 1, - }, - { - .name = "brightness", - .read = brightness_read, - .write = brightness_write, - .init = brightness_init, - .exit = brightness_exit, - }, - { - .name = "volume", - .read = volume_read, - .write = volume_write, - }, - { - .name = "fan", - .read = fan_read, - .write = fan_write, - .init = fan_init, - .exit = fan_exit, - .experimental = 1, - }, -}; - -/* - * Module and infrastructure proble, init and exit handling - */ - -static int __init ibm_init(struct ibm_struct *ibm) -{ - int ret; - struct proc_dir_entry *entry; - - if (ibm->experimental && !experimental) - return 0; - - if (ibm->hid) { - ret = register_ibmacpi_subdriver(ibm); - if (ret < 0) - return ret; - ibm->driver_registered = 1; - } - - if (ibm->init) { - ret = ibm->init(); - if (ret != 0) - return ret; - ibm->init_called = 1; - } - - if (ibm->read) { - entry = create_proc_entry(ibm->name, - S_IFREG | S_IRUGO | S_IWUSR, - proc_dir); - if (!entry) { - printk(IBM_ERR "unable to create proc entry %s\n", - ibm->name); - return -ENODEV; - } - entry->owner = THIS_MODULE; - entry->data = ibm; - entry->read_proc = &dispatch_read; - if (ibm->write) - entry->write_proc = &dispatch_write; - ibm->proc_created = 1; - } - - if (ibm->notify) { - ret = setup_notify(ibm); - if (ret == -ENODEV) { - printk(IBM_NOTICE "disabling subdriver %s\n", - ibm->name); - ibm_exit(ibm); - return 0; - } - if (ret < 0) - return ret; - } - - return 0; -} - -static void ibm_exit(struct ibm_struct *ibm) -{ - if (ibm->notify_installed) - acpi_remove_notify_handler(*ibm->handle, ibm->type, - dispatch_notify); - - if (ibm->proc_created) - remove_proc_entry(ibm->name, proc_dir); - - if (ibm->init_called && ibm->exit) - ibm->exit(); - - if (ibm->driver_registered) { - acpi_bus_unregister_driver(ibm->driver); - kfree(ibm->driver); - } -} - -/* Probing */ - -static char *ibm_thinkpad_ec_found = NULL; - -static char* __init check_dmi_for_ec(void) -{ - struct dmi_device *dev = NULL; - char ec_fw_string[18]; - - /* - * ThinkPad T23 or newer, A31 or newer, R50e or newer, - * X32 or newer, all Z series; Some models must have an - * up-to-date BIOS or they will not be detected. - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - */ - while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { - if (sscanf(dev->name, - "IBM ThinkPad Embedded Controller -[%17c", - ec_fw_string) == 1) { - ec_fw_string[sizeof(ec_fw_string) - 1] = 0; - ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; - return kstrdup(ec_fw_string, GFP_KERNEL); - } - } - return NULL; -} - -/* Module init, exit, parameters */ - -static int __init set_ibm_param(const char *val, struct kernel_param *kp) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(ibms); i++) - if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) { - if (strlen(val) > sizeof(ibms[i].param) - 2) - return -ENOSPC; - strcpy(ibms[i].param, val); - strcat(ibms[i].param, ","); - return 0; - } - - return -EINVAL; -} - -static int experimental; -module_param(experimental, int, 0); - -#define IBM_PARAM(feature) \ - module_param_call(feature, set_ibm_param, NULL, NULL, 0) - -IBM_PARAM(hotkey); -IBM_PARAM(bluetooth); -IBM_PARAM(video); -IBM_PARAM(light); -#ifdef CONFIG_ACPI_IBM_DOCK -IBM_PARAM(dock); -#endif -#ifdef CONFIG_ACPI_IBM_BAY -IBM_PARAM(bay); -#endif /* CONFIG_ACPI_IBM_BAY */ -IBM_PARAM(cmos); -IBM_PARAM(led); -IBM_PARAM(beep); -IBM_PARAM(ecdump); -IBM_PARAM(brightness); -IBM_PARAM(volume); -IBM_PARAM(fan); - -static int __init acpi_ibm_init(void) -{ - int ret, i; - - if (acpi_disabled) - return -ENODEV; - - /* ec is required because many other handles are relative to it */ - IBM_HANDLE_INIT(ec); - if (!ec_handle) { - printk(IBM_ERR "ec object not found\n"); - return -ENODEV; - } - - /* Models with newer firmware report the EC in DMI */ - ibm_thinkpad_ec_found = check_dmi_for_ec(); - - /* these handles are not required */ - IBM_HANDLE_INIT(vid); - IBM_HANDLE_INIT(vid2); - IBM_HANDLE_INIT(ledb); - IBM_HANDLE_INIT(led); - IBM_HANDLE_INIT(hkey); - IBM_HANDLE_INIT(lght); - IBM_HANDLE_INIT(cmos); -#ifdef CONFIG_ACPI_IBM_DOCK - IBM_HANDLE_INIT(dock); -#endif - IBM_HANDLE_INIT(pci); -#ifdef CONFIG_ACPI_IBM_BAY - IBM_HANDLE_INIT(bay); - if (bay_handle) - IBM_HANDLE_INIT(bay_ej); - IBM_HANDLE_INIT(bay2); - if (bay2_handle) - IBM_HANDLE_INIT(bay2_ej); -#endif /* CONFIG_ACPI_IBM_BAY */ - IBM_HANDLE_INIT(beep); - IBM_HANDLE_INIT(ecrd); - IBM_HANDLE_INIT(ecwr); - IBM_HANDLE_INIT(fans); - IBM_HANDLE_INIT(gfan); - IBM_HANDLE_INIT(sfan); - - proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir); - if (!proc_dir) { - printk(IBM_ERR "unable to create proc dir %s", IBM_DIR); - acpi_ibm_exit(); - return -ENODEV; - } - proc_dir->owner = THIS_MODULE; - - for (i = 0; i < ARRAY_SIZE(ibms); i++) { - ret = ibm_init(&ibms[i]); - if (ret >= 0 && *ibms[i].param) - ret = ibms[i].write(ibms[i].param); - if (ret < 0) { - acpi_ibm_exit(); - return ret; - } - } - - return 0; -} - -static void acpi_ibm_exit(void) -{ - int i; - - for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) - ibm_exit(&ibms[i]); - - if (proc_dir) - remove_proc_entry(IBM_DIR, acpi_root_dir); - - if (ibm_thinkpad_ec_found) - kfree(ibm_thinkpad_ec_found); -} - -module_init(acpi_ibm_init); -module_exit(acpi_ibm_exit); diff --git a/drivers/acpi/ibm_acpi.h b/drivers/acpi/ibm_acpi.h deleted file mode 100644 index 7ebaaa40e183..000000000000 --- a/drivers/acpi/ibm_acpi.h +++ /dev/null @@ -1,437 +0,0 @@ -/* - * ibm_acpi.h - IBM ThinkPad ACPI Extras - * - * - * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006-2007 Henrique de Moraes Holschuh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __IBM_ACPI_H__ -#define __IBM_ACPI_H__ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - - -/**************************************************************************** - * Main driver - */ - -#define IBM_NAME "ibm" -#define IBM_DESC "IBM ThinkPad ACPI Extras" -#define IBM_FILE "ibm_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" - -#define IBM_DIR IBM_NAME - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - -/* ThinkPad CMOS commands */ -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - -/* ACPI HIDs */ -#define IBM_HKEY_HID "IBM0068" -#define IBM_PCI_HID "PNP0A03" - -/* ACPI helpers */ -static int acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...); -static int acpi_ec_read(int i, u8 * p); -static int acpi_ec_write(int i, u8 v); -static int _sta(acpi_handle handle); - -/* ACPI handles */ -static acpi_handle root_handle; /* root namespace */ -static acpi_handle ec_handle; /* EC */ -static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ -static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ - -static void ibm_handle_init(char *name, - acpi_handle * handle, acpi_handle parent, - char **paths, int num_paths, char **path); -#define IBM_HANDLE_INIT(object) \ - ibm_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) - -/* procfs support */ -static struct proc_dir_entry *proc_dir; -static int ibm_acpi_driver_init(void); -static int ibm_acpi_driver_read(char *p); - -/* procfs helpers */ -static int dispatch_read(char *page, char **start, off_t off, int count, - int *eof, void *data); -static int dispatch_write(struct file *file, const char __user * userbuf, - unsigned long count, void *data); -static char *next_cmd(char **cmds); - -/* Module */ -static int experimental; -static char *ibm_thinkpad_ec_found; - -static char* check_dmi_for_ec(void); -static int acpi_ibm_init(void); -static void acpi_ibm_exit(void); - - -/**************************************************************************** - * Subdrivers - */ - -struct ibm_struct { - char *name; - char param[32]; - - char *hid; - struct acpi_driver *driver; - - int (*init) (void); - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - int type; - struct acpi_device *device; - - int driver_registered; - int proc_created; - int init_called; - int notify_installed; - - int experimental; -}; - -static struct ibm_struct ibms[]; -static int set_ibm_param(const char *val, struct kernel_param *kp); -static int ibm_init(struct ibm_struct *ibm); -static void ibm_exit(struct ibm_struct *ibm); - -/* ACPI devices */ -static void dispatch_notify(acpi_handle handle, u32 event, void *data); -static int setup_notify(struct ibm_struct *ibm); -static int ibm_device_add(struct acpi_device *device); -static int register_ibmacpi_subdriver(struct ibm_struct *ibm); - - -/* - * Bay subdriver - */ - -#ifdef CONFIG_ACPI_IBM_BAY -static int bay_status_supported, bay_eject_supported; -static int bay_status2_supported, bay_eject2_supported; - -static acpi_handle bay_handle, bay_ej_handle; -static acpi_handle bay2_handle, bay2_ej_handle; - -static int bay_init(void); -static void bay_notify(struct ibm_struct *ibm, u32 event); -static int bay_read(char *p); -static int bay_write(char *buf); -#endif /* CONFIG_ACPI_IBM_BAY */ - - -/* - * Beep subdriver - */ - -static acpi_handle beep_handle; - -static int beep_read(char *p); -static int beep_write(char *buf); - - -/* - * Bluetooth subdriver - */ - -static int bluetooth_supported; - -static int bluetooth_init(void); -static int bluetooth_status(void); -static int bluetooth_read(char *p); -static int bluetooth_write(char *buf); - - -/* - * Brightness (backlight) subdriver - */ - -static struct backlight_device *ibm_backlight_device; -static int brightness_offset = 0x31; - -static int brightness_init(void); -static void brightness_exit(void); -static int brightness_get(struct backlight_device *bd); -static int brightness_set(int value); -static int brightness_update_status(struct backlight_device *bd); -static int brightness_read(char *p); -static int brightness_write(char *buf); - - -/* - * CMOS subdriver - */ - -static int cmos_eval(int cmos_cmd); -static int cmos_read(char *p); -static int cmos_write(char *buf); - - -/* - * Dock subdriver - */ - -static acpi_handle pci_handle; -#ifdef CONFIG_ACPI_IBM_DOCK -static acpi_handle dock_handle; - -static void dock_notify(struct ibm_struct *ibm, u32 event); -static int dock_read(char *p); -static int dock_write(char *buf); -#endif /* CONFIG_ACPI_IBM_DOCK */ - - -/* - * EC dump subdriver - */ - -static int ecdump_read(char *p) ; -static int ecdump_write(char *buf); - - -/* - * Fan subdriver - */ - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer - * disengaged */ - IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan - * control */ -}; - -enum fan_status_access_mode { - IBMACPI_FAN_NONE = 0, /* No fan status or control */ - IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - IBMACPI_FAN_WR_NONE = 0, /* No fan control */ - IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -static enum fan_status_access_mode fan_status_access_mode; -static enum fan_control_access_mode fan_control_access_mode; -static enum fan_control_commands fan_control_commands; -static int fan_control_status_known; -static u8 fan_control_initial_status; -static int fan_watchdog_maxinterval; - -static acpi_handle fans_handle, gfan_handle, sfan_handle; - -static int fan_init(void); -static void fan_exit(void); -static int fan_get_status(u8 *status); -static int fan_get_speed(unsigned int *speed); -static void fan_watchdog_fire(struct work_struct *ignored); -static void fan_watchdog_reset(void); -static int fan_set_level(int level); -static int fan_set_enable(void); -static int fan_set_disable(void); -static int fan_set_speed(int speed); -static int fan_read(char *p); -static int fan_write(char *buf); -static int fan_write_cmd_level(const char *cmd, int *rc); -static int fan_write_cmd_enable(const char *cmd, int *rc); -static int fan_write_cmd_disable(const char *cmd, int *rc); -static int fan_write_cmd_speed(const char *cmd, int *rc); -static int fan_write_cmd_watchdog(const char *cmd, int *rc); - - -/* - * Hotkey subdriver - */ - -static int hotkey_supported; -static int hotkey_mask_supported; -static int hotkey_orig_status; -static int hotkey_orig_mask; - -static int hotkey_init(void); -static void hotkey_exit(void); -static int hotkey_get(int *status, int *mask); -static int hotkey_set(int status, int mask); -static void hotkey_notify(struct ibm_struct *ibm, u32 event); -static int hotkey_read(char *p); -static int hotkey_write(char *buf); - - -/* - * LED subdriver - */ - -enum led_access_mode { - IBMACPI_LED_NONE = 0, - IBMACPI_LED_570, /* 570 */ - IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - IBMACPI_LED_NEW, /* all others */ -}; - -enum { /* For IBMACPI_LED_OLD */ - IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ - IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ - IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ -}; - -static enum led_access_mode led_supported; -static acpi_handle led_handle; - -static int led_init(void); -static int led_read(char *p); -static int led_write(char *buf); - -/* - * Light (thinklight) subdriver - */ - -static int light_supported; -static int light_status_supported; -static acpi_handle lght_handle, ledb_handle; - -static int light_init(void); -static int light_read(char *p); -static int light_write(char *buf); - - -/* - * Thermal subdriver - */ - -enum thermal_access_mode { - IBMACPI_THERMAL_NONE = 0, /* No thermal support */ - IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; -}; - -static int thermal_init(void); -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); -static int thermal_read(char *p); - - -/* - * Video subdriver - */ - -enum video_access_mode { - IBMACPI_VIDEO_NONE = 0, - IBMACPI_VIDEO_570, /* 570 */ - IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - IBMACPI_VIDEO_NEW, /* all others */ -}; - -static enum video_access_mode video_supported; -static int video_orig_autosw; -static acpi_handle vid_handle, vid2_handle; - -static int video_init(void); -static void video_exit(void); -static int video_status(void); -static int video_autosw(void); -static int video_switch(void); -static int video_switch2(int status); -static int video_expand(void); -static int video_read(char *p); -static int video_write(char *buf); - - -/* - * Volume subdriver - */ - -static int volume_offset = 0x30; - -static int volume_read(char *p); -static int volume_write(char *buf); - - -/* - * Wan subdriver - */ - -static int wan_supported; - -static int wan_init(void); -static int wan_status(void); -static int wan_read(char *p); -static int wan_write(char *buf); - - -#endif /* __IBM_ACPI_H */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 80b199fa0aa9..5d2bcbf1e3d4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -122,4 +122,41 @@ config SONY_LAPTOP Read for more information. +config ACPI_IBM + tristate "IBM ThinkPad Laptop Extras" + depends on X86 && ACPI + select BACKLIGHT_CLASS_DEVICE + ---help--- + This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds + support for Fn-Fx key combinations, Bluetooth control, video + output switching, ThinkLight control, UltraBay eject and more. + For more information about this driver see + and . + + If you have an IBM ThinkPad laptop, say Y or M here. + +config ACPI_IBM_DOCK + bool "Legacy Docking Station Support" + depends on ACPI_IBM + depends on ACPI_DOCK=n + default n + ---help--- + Allows the ibm_acpi driver to handle docking station events. + This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will + allow locking and removing the laptop from the docking station, + but will not properly connect PCI devices. + + If you are not sure, say N here. + +config ACPI_IBM_BAY + bool "Legacy Removable Bay Support" + depends on ACPI_IBM + default y + ---help--- + Allows the ibm_acpi driver to handle removable bays. It will allow + disabling the device in the bay, and also generate notifications when + the bay lever is ejected or inserted. + + If you are not sure, say Y here. + endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7793ccd79049..848b398482d9 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o +obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o diff --git a/drivers/misc/ibm_acpi.c b/drivers/misc/ibm_acpi.c new file mode 100644 index 000000000000..ae03b8f6f7be --- /dev/null +++ b/drivers/misc/ibm_acpi.c @@ -0,0 +1,2783 @@ +/* + * ibm_acpi.c - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#define IBM_VERSION "0.13" + +/* + * Changelog: + * + * 2006-11-22 0.13 new maintainer + * changelog now lives in git commit history, and will + * not be updated further in-file. + * + * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels + * 2005-03-17 0.11 support for 600e, 770x + * thanks to Jamie Lentin + * support for 770e, G41 + * G40 and G41 don't have a thinklight + * temperatures no longer experimental + * experimental brightness control + * experimental volume control + * experimental fan enable/disable + * 2005-01-16 0.10 fix module loading on R30, R31 + * 2005-01-16 0.9 support for 570, R30, R31 + * ultrabay support on A22p, A3x + * limit arg for cmos, led, beep, drop experimental status + * more capable led control on A21e, A22p, T20-22, X20 + * experimental temperatures and fan speed + * experimental embedded controller register dump + * mark more functions as __init, drop incorrect __exit + * use MODULE_VERSION + * thanks to Henrik Brix Andersen + * fix parameter passing on module loading + * thanks to Rusty Russell + * thanks to Jim Radford + * 2004-11-08 0.8 fix init error case, don't return from a macro + * thanks to Chris Wright + * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20 + * fix led control on A21e + * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device + * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20 + * proc file format changed + * video_switch command + * experimental cmos control + * experimental led control + * experimental acpi sounds + * 2004-09-16 0.4 support for module parameters + * hotkey mask can be prefixed by 0x + * video output switching + * video expansion control + * ultrabay eject support + * removed lcd brightness/on/off control, didn't work + * 2004-08-17 0.3 support for R40 + * lcd off, brightness control + * thinklight on/off + * 2004-08-14 0.2 support for T series, X20 + * bluetooth enable/disable + * hotkey events disabled by default + * removed fan control, currently useless + * 2004-08-09 0.1 initial release, support for X series + */ + +#include "ibm_acpi.h" + +MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); +MODULE_DESCRIPTION(IBM_DESC); +MODULE_VERSION(IBM_VERSION); +MODULE_LICENSE("GPL"); + +#define __unused __attribute__ ((unused)) + +/**************************************************************************** + **************************************************************************** + * + * ACPI Helpers and device model + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ACPI basic handles + */ + +static acpi_handle root_handle = NULL; + +#define IBM_HANDLE(object, parent, paths...) \ + static acpi_handle object##_handle; \ + static acpi_handle *object##_parent = &parent##_handle; \ + static char *object##_path; \ + static char *object##_paths[] = { paths } + +IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ + "\\_SB.PCI.ISA.EC", /* 570 */ + "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */ + "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */ + "\\_SB.PCI0.ICH3.EC0", /* R31 */ + "\\_SB.PCI0.LPC.EC", /* all others */ + ); + +IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ + + +/************************************************************************* + * Misc ACPI handles + */ + +IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ + "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ + "\\CMS", /* R40, R40e */ + ); /* all others */ + +IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ + "^HKEY", /* R30, R31 */ + "HKEY", /* all others */ + ); /* 570 */ + + +/************************************************************************* + * ACPI helpers + */ + +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...) +{ + char *fmt0 = fmt; + struct acpi_object_list params; + union acpi_object in_objs[IBM_MAX_ACPI_ARGS]; + struct acpi_buffer result, *resultp; + union acpi_object out_obj; + acpi_status status; + va_list ap; + char res_type; + int success; + int quiet; + + if (!*fmt) { + printk(IBM_ERR "acpi_evalf() called with empty format\n"); + return 0; + } + + if (*fmt == 'q') { + quiet = 1; + fmt++; + } else + quiet = 0; + + res_type = *(fmt++); + + params.count = 0; + params.pointer = &in_objs[0]; + + va_start(ap, fmt); + while (*fmt) { + char c = *(fmt++); + switch (c) { + case 'd': /* int */ + in_objs[params.count].integer.value = va_arg(ap, int); + in_objs[params.count++].type = ACPI_TYPE_INTEGER; + break; + /* add more types as needed */ + default: + printk(IBM_ERR "acpi_evalf() called " + "with invalid format character '%c'\n", c); + return 0; + } + } + va_end(ap); + + if (res_type != 'v') { + result.length = sizeof(out_obj); + result.pointer = &out_obj; + resultp = &result; + } else + resultp = NULL; + + status = acpi_evaluate_object(handle, method, ¶ms, resultp); + + switch (res_type) { + case 'd': /* int */ + if (res) + *(int *)res = out_obj.integer.value; + success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER; + break; + case 'v': /* void */ + success = status == AE_OK; + break; + /* add more types as needed */ + default: + printk(IBM_ERR "acpi_evalf() called " + "with invalid format character '%c'\n", res_type); + return 0; + } + + if (!success && !quiet) + printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", + method, fmt0, status); + + return success; +} + +static void __unused acpi_print_int(acpi_handle handle, char *method) +{ + int i; + + if (acpi_evalf(handle, &i, method, "d")) + printk(IBM_INFO "%s = 0x%x\n", method, i); + else + printk(IBM_ERR "error calling %s\n", method); +} + +static int acpi_ec_read(int i, u8 * p) +{ + int v; + + if (ecrd_handle) { + if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i)) + return 0; + *p = v; + } else { + if (ec_read(i, p) < 0) + return 0; + } + + return 1; +} + +static int acpi_ec_write(int i, u8 v) +{ + if (ecwr_handle) { + if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v)) + return 0; + } else { + if (ec_write(i, v) < 0) + return 0; + } + + return 1; +} + +static int _sta(acpi_handle handle) +{ + int status; + + if (!handle || !acpi_evalf(handle, &status, "_STA", "d")) + status = 0; + + return status; +} + +/************************************************************************* + * ACPI device model + */ + +static void __init ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(parent, paths[i], handle); + if (ACPI_SUCCESS(status)) { + *path = paths[i]; + return; + } + } + + *handle = NULL; +} + +static void dispatch_notify(acpi_handle handle, u32 event, void *data) +{ + struct ibm_struct *ibm = data; + + if (!ibm || !ibm->notify) + return; + + ibm->notify(ibm, event); +} + +static int __init setup_notify(struct ibm_struct *ibm) +{ + acpi_status status; + int ret; + + if (!*ibm->handle) + return 0; + + ret = acpi_bus_get_device(*ibm->handle, &ibm->device); + if (ret < 0) { + printk(IBM_ERR "%s device not present\n", ibm->name); + return -ENODEV; + } + + acpi_driver_data(ibm->device) = ibm; + sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name); + + status = acpi_install_notify_handler(*ibm->handle, ibm->type, + dispatch_notify, ibm); + if (ACPI_FAILURE(status)) { + if (status == AE_ALREADY_EXISTS) { + printk(IBM_NOTICE "another device driver is already handling %s events\n", + ibm->name); + } else { + printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); + } + return -ENODEV; + } + ibm->notify_installed = 1; + return 0; +} + +static int __init ibm_device_add(struct acpi_device *device) +{ + return 0; +} + +static int __init register_ibmacpi_subdriver(struct ibm_struct *ibm) +{ + int ret; + + ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); + if (!ibm->driver) { + printk(IBM_ERR "kmalloc(ibm->driver) failed\n"); + return -1; + } + + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); + ibm->driver->ids = ibm->hid; + ibm->driver->ops.add = &ibm_device_add; + + ret = acpi_bus_register_driver(ibm->driver); + if (ret < 0) { + printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + ibm->hid, ret); + kfree(ibm->driver); + } + + return ret; +} + + +/**************************************************************************** + **************************************************************************** + * + * Procfs Helpers + * + **************************************************************************** + ****************************************************************************/ + +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct ibm_struct *ibm = data; + int len; + + if (!ibm || !ibm->read) + return -EINVAL; + + len = ibm->read(page); + if (len < 0) + return len; + + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data) +{ + struct ibm_struct *ibm = data; + char *kernbuf; + int ret; + + if (!ibm || !ibm->write) + return -EINVAL; + + kernbuf = kmalloc(count + 2, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + + kernbuf[count] = 0; + strcat(kernbuf, ","); + ret = ibm->write(kernbuf); + if (ret == 0) + ret = count; + + kfree(kernbuf); + + return ret; +} + +static char *next_cmd(char **cmds) +{ + char *start = *cmds; + char *end; + + while ((end = strchr(start, ',')) && end == start) + start = end + 1; + + if (!end) + return NULL; + + *end = 0; + *cmds = end + 1; + return start; +} + + +/**************************************************************************** + **************************************************************************** + * + * Subdrivers + * + **************************************************************************** + ****************************************************************************/ + +/************************************************************************* + * ibm-acpi init subdriver + */ + +static int ibm_acpi_driver_init(void) +{ + printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); + printk(IBM_INFO "%s\n", IBM_URL); + + if (ibm_thinkpad_ec_found) + printk(IBM_INFO "ThinkPad EC firmware %s\n", + ibm_thinkpad_ec_found); + + return 0; +} + +static int ibm_acpi_driver_read(char *p) +{ + int len = 0; + + len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC); + len += sprintf(p + len, "version:\t%s\n", IBM_VERSION); + + return len; +} + +/************************************************************************* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void) +{ + /* hotkey not supported on 570 */ + hotkey_supported = hkey_handle != NULL; + + if (hotkey_supported) { + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24 */ + hotkey_mask_supported = + acpi_evalf(hkey_handle, NULL, "DHKN", "qv"); + + if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask)) + return -ENODEV; + } + + return 0; +} + +static void hotkey_exit(void) +{ + if (hotkey_supported) + hotkey_set(hotkey_orig_status, hotkey_orig_mask); +} + +static void hotkey_notify(struct ibm_struct *ibm, u32 event) +{ + int hkey; + + if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) + acpi_bus_generate_event(ibm->device, event, hkey); + else { + printk(IBM_ERR "unknown hotkey event %d\n", event); + acpi_bus_generate_event(ibm->device, event, 0); + } +} + +static int hotkey_get(int *status, int *mask) +{ + if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) + return 0; + + if (hotkey_mask_supported) + if (!acpi_evalf(hkey_handle, mask, "DHKN", "d")) + return 0; + + return 1; +} + +static int hotkey_set(int status, int mask) +{ + int i; + + if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status)) + return 0; + + if (hotkey_mask_supported) + for (i = 0; i < 32; i++) { + int bit = ((1 << i) & mask) != 0; + if (!acpi_evalf(hkey_handle, + NULL, "MHKM", "vdd", i + 1, bit)) + return 0; + } + + return 1; +} + +static int hotkey_read(char *p) +{ + int status, mask; + int len = 0; + + if (!hotkey_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + if (!hotkey_get(&status, &mask)) + return -EIO; + + len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0)); + if (hotkey_mask_supported) { + len += sprintf(p + len, "mask:\t\t0x%04x\n", mask); + len += sprintf(p + len, + "commands:\tenable, disable, reset, \n"); + } else { + len += sprintf(p + len, "mask:\t\tnot supported\n"); + len += sprintf(p + len, "commands:\tenable, disable, reset\n"); + } + + return len; +} + +static int hotkey_write(char *buf) +{ + int status, mask; + char *cmd; + int do_cmd = 0; + + if (!hotkey_supported) + return -ENODEV; + + if (!hotkey_get(&status, &mask)) + return -EIO; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "enable") == 0) { + status = 1; + } else if (strlencmp(cmd, "disable") == 0) { + status = 0; + } else if (strlencmp(cmd, "reset") == 0) { + status = hotkey_orig_status; + mask = hotkey_orig_mask; + } else if (sscanf(cmd, "0x%x", &mask) == 1) { + /* mask set */ + } else if (sscanf(cmd, "%x", &mask) == 1) { + /* mask set */ + } else + return -EINVAL; + do_cmd = 1; + } + + if (do_cmd && !hotkey_set(status, mask)) + return -EIO; + + return 0; +} + +/************************************************************************* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void) +{ + /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + G4x, R30, R31, R40e, R50e, T20-22, X20-21 */ + bluetooth_supported = hkey_handle && + acpi_evalf(hkey_handle, NULL, "GBDC", "qv"); + + return 0; +} + +static int bluetooth_status(void) +{ + int status; + + if (!bluetooth_supported || + !acpi_evalf(hkey_handle, &status, "GBDC", "d")) + status = 0; + + return status; +} + +static int bluetooth_read(char *p) +{ + int len = 0; + int status = bluetooth_status(); + + if (!bluetooth_supported) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else if (!(status & 1)) + len += sprintf(p + len, "status:\t\tnot installed\n"); + else { + len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1)); + len += sprintf(p + len, "commands:\tenable, disable\n"); + } + + return len; +} + +static int bluetooth_write(char *buf) +{ + int status = bluetooth_status(); + char *cmd; + int do_cmd = 0; + + if (!bluetooth_supported) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "enable") == 0) { + status |= 2; + } else if (strlencmp(cmd, "disable") == 0) { + status &= ~2; + } else + return -EINVAL; + do_cmd = 1; + } + + if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status)) + return -EIO; + + return 0; +} + +/************************************************************************* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void) +{ + wan_supported = hkey_handle && + acpi_evalf(hkey_handle, NULL, "GWAN", "qv"); + + return 0; +} + +static int wan_status(void) +{ + int status; + + if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d")) + status = 0; + + return status; +} + +static int wan_read(char *p) +{ + int len = 0; + int status = wan_status(); + + if (!wan_supported) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else if (!(status & 1)) + len += sprintf(p + len, "status:\t\tnot installed\n"); + else { + len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1)); + len += sprintf(p + len, "commands:\tenable, disable\n"); + } + + return len; +} + +static int wan_write(char *buf) +{ + int status = wan_status(); + char *cmd; + int do_cmd = 0; + + if (!wan_supported) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "enable") == 0) { + status |= 2; + } else if (strlencmp(cmd, "disable") == 0) { + status &= ~2; + } else + return -EINVAL; + do_cmd = 1; + } + + if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status)) + return -EIO; + + return 0; +} + +/************************************************************************* + * Video subdriver + */ + +static enum video_access_mode video_supported; +static int video_orig_autosw; + +IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + +IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ + +static int video_init(void) +{ + int ivga; + + if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga) + /* G41, assume IVGA doesn't change */ + vid_handle = vid2_handle; + + if (!vid_handle) + /* video switching not supported on R30, R31 */ + video_supported = IBMACPI_VIDEO_NONE; + else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd")) + /* 570 */ + video_supported = IBMACPI_VIDEO_570; + else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd")) + /* 600e/x, 770e, 770x */ + video_supported = IBMACPI_VIDEO_770; + else + /* all others */ + video_supported = IBMACPI_VIDEO_NEW; + + return 0; +} + +static void video_exit(void) +{ + acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw); +} + +static int video_status(void) +{ + int status = 0; + int i; + + if (video_supported == IBMACPI_VIDEO_570) { + if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87)) + status = i & 3; + } else if (video_supported == IBMACPI_VIDEO_770) { + if (acpi_evalf(NULL, &i, "\\VCDL", "d")) + status |= 0x01 * i; + if (acpi_evalf(NULL, &i, "\\VCDC", "d")) + status |= 0x02 * i; + } else if (video_supported == IBMACPI_VIDEO_NEW) { + acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1); + if (acpi_evalf(NULL, &i, "\\VCDC", "d")) + status |= 0x02 * i; + + acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0); + if (acpi_evalf(NULL, &i, "\\VCDL", "d")) + status |= 0x01 * i; + if (acpi_evalf(NULL, &i, "\\VCDD", "d")) + status |= 0x08 * i; + } + + return status; +} + +static int video_autosw(void) +{ + int autosw = 0; + + if (video_supported == IBMACPI_VIDEO_570) + acpi_evalf(vid_handle, &autosw, "SWIT", "d"); + else if (video_supported == IBMACPI_VIDEO_770 || + video_supported == IBMACPI_VIDEO_NEW) + acpi_evalf(vid_handle, &autosw, "^VDEE", "d"); + + return autosw & 1; +} + +static int video_switch(void) +{ + int autosw = video_autosw(); + int ret; + + if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) + return -EIO; + ret = video_supported == IBMACPI_VIDEO_570 ? + acpi_evalf(ec_handle, NULL, "_Q16", "v") : + acpi_evalf(vid_handle, NULL, "VSWT", "v"); + acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw); + + return ret; +} + +static int video_expand(void) +{ + if (video_supported == IBMACPI_VIDEO_570) + return acpi_evalf(ec_handle, NULL, "_Q17", "v"); + else if (video_supported == IBMACPI_VIDEO_770) + return acpi_evalf(vid_handle, NULL, "VEXP", "v"); + else + return acpi_evalf(NULL, NULL, "\\VEXP", "v"); +} + +static int video_switch2(int status) +{ + int ret; + + if (video_supported == IBMACPI_VIDEO_570) { + ret = acpi_evalf(NULL, NULL, + "\\_SB.PHS2", "vdd", 0x8b, status | 0x80); + } else if (video_supported == IBMACPI_VIDEO_770) { + int autosw = video_autosw(); + if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) + return -EIO; + + ret = acpi_evalf(vid_handle, NULL, + "ASWT", "vdd", status * 0x100, 0); + + acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw); + } else { + ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) && + acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1); + } + + return ret; +} + +static int video_read(char *p) +{ + int status = video_status(); + int autosw = video_autosw(); + int len = 0; + + if (!video_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); + len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); + len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); + len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); + len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); + if (video_supported == IBMACPI_VIDEO_NEW) + len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); + len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); + len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); + + return len; +} + +static int video_write(char *buf) +{ + char *cmd; + int enable, disable, status; + + if (!video_supported) + return -ENODEV; + + enable = disable = 0; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "lcd_enable") == 0) { + enable |= 0x01; + } else if (strlencmp(cmd, "lcd_disable") == 0) { + disable |= 0x01; + } else if (strlencmp(cmd, "crt_enable") == 0) { + enable |= 0x02; + } else if (strlencmp(cmd, "crt_disable") == 0) { + disable |= 0x02; + } else if (video_supported == IBMACPI_VIDEO_NEW && + strlencmp(cmd, "dvi_enable") == 0) { + enable |= 0x08; + } else if (video_supported == IBMACPI_VIDEO_NEW && + strlencmp(cmd, "dvi_disable") == 0) { + disable |= 0x08; + } else if (strlencmp(cmd, "auto_enable") == 0) { + if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) + return -EIO; + } else if (strlencmp(cmd, "auto_disable") == 0) { + if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0)) + return -EIO; + } else if (strlencmp(cmd, "video_switch") == 0) { + if (!video_switch()) + return -EIO; + } else if (strlencmp(cmd, "expand_toggle") == 0) { + if (!video_expand()) + return -EIO; + } else + return -EINVAL; + } + + if (enable || disable) { + status = (video_status() & 0x0f & ~disable) | enable; + if (!video_switch2(status)) + return -EIO; + } + + return 0; +} + +/************************************************************************* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; + +IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ + +static int light_init(void) +{ + /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ + light_supported = (cmos_handle || lght_handle) && !ledb_handle; + + if (light_supported) + /* light status not supported on + 570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */ + light_status_supported = acpi_evalf(ec_handle, NULL, + "KBLT", "qv"); + + return 0; +} + +static int light_read(char *p) +{ + int len = 0; + int status = 0; + + if (!light_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + } else if (!light_status_supported) { + len += sprintf(p + len, "status:\t\tunknown\n"); + len += sprintf(p + len, "commands:\ton, off\n"); + } else { + if (!acpi_evalf(ec_handle, &status, "KBLT", "d")) + return -EIO; + len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0)); + len += sprintf(p + len, "commands:\ton, off\n"); + } + + return len; +} + +static int light_write(char *buf) +{ + int cmos_cmd, lght_cmd; + char *cmd; + int success; + + if (!light_supported) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "on") == 0) { + cmos_cmd = 0x0c; + lght_cmd = 1; + } else if (strlencmp(cmd, "off") == 0) { + cmos_cmd = 0x0d; + lght_cmd = 0; + } else + return -EINVAL; + + success = cmos_handle ? + acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) : + acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd); + if (!success) + return -EIO; + } + + return 0; +} + +/************************************************************************* + * Dock subdriver + */ + +/* don't list other alternatives as we install a notify handler on the 570 */ +IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ + +#ifdef CONFIG_ACPI_IBM_DOCK + +IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ + "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ + "\\_SB.PCI0.PCI1.DOCK", /* all others */ + "\\_SB.PCI.ISA.SLCE", /* 570 */ + ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ + +#define dock_docked() (_sta(dock_handle) & 1) + +static void dock_notify(struct ibm_struct *ibm, u32 event) +{ + int docked = dock_docked(); + int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID); + + if (event == 1 && !pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 1 && pci) /* 570 */ + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else if (event == 3 && docked) + acpi_bus_generate_event(ibm->device, event, 1); /* button */ + else if (event == 3 && !docked) + acpi_bus_generate_event(ibm->device, event, 2); /* undock */ + else if (event == 0 && docked) + acpi_bus_generate_event(ibm->device, event, 3); /* dock */ + else { + printk(IBM_ERR "unknown dock event %d, status %d\n", + event, _sta(dock_handle)); + acpi_bus_generate_event(ibm->device, event, 0); /* unknown */ + } +} + +static int dock_read(char *p) +{ + int len = 0; + int docked = dock_docked(); + + if (!dock_handle) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else if (!docked) + len += sprintf(p + len, "status:\t\tundocked\n"); + else { + len += sprintf(p + len, "status:\t\tdocked\n"); + len += sprintf(p + len, "commands:\tdock, undock\n"); + } + + return len; +} + +static int dock_write(char *buf) +{ + char *cmd; + + if (!dock_docked()) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "undock") == 0) { + if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) || + !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1)) + return -EIO; + } else if (strlencmp(cmd, "dock") == 0) { + if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1)) + return -EIO; + } else + return -EINVAL; + } + + return 0; +} + +#endif /* CONFIG_ACPI_IBM_DOCK */ + +/************************************************************************* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported; +static int bay_status2_supported; +static int bay_eject_supported; +static int bay_eject2_supported; + +IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ + "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ + "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ + ); /* A21e, R30, R31 */ +IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ + "_EJ0", /* all others */ + ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ +IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ + "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ + "_EJ0", /* 770x */ + ); /* all others */ + +static int bay_init(void) +{ + bay_status_supported = bay_handle && + acpi_evalf(bay_handle, NULL, "_STA", "qv"); + bay_status2_supported = bay2_handle && + acpi_evalf(bay2_handle, NULL, "_STA", "qv"); + + bay_eject_supported = bay_handle && bay_ej_handle && + (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental); + bay_eject2_supported = bay2_handle && bay2_ej_handle && + (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental); + + return 0; +} + +static void bay_notify(struct ibm_struct *ibm, u32 event) +{ + acpi_bus_generate_event(ibm->device, event, 0); +} + +#define bay_occupied(b) (_sta(b##_handle) & 1) + +static int bay_read(char *p) +{ + int len = 0; + int occupied = bay_occupied(bay); + int occupied2 = bay_occupied(bay2); + int eject, eject2; + + len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ? + (occupied ? "occupied" : "unoccupied") : + "not supported"); + if (bay_status2_supported) + len += sprintf(p + len, "status2:\t%s\n", occupied2 ? + "occupied" : "unoccupied"); + + eject = bay_eject_supported && occupied; + eject2 = bay_eject2_supported && occupied2; + + if (eject && eject2) + len += sprintf(p + len, "commands:\teject, eject2\n"); + else if (eject) + len += sprintf(p + len, "commands:\teject\n"); + else if (eject2) + len += sprintf(p + len, "commands:\teject2\n"); + + return len; +} + +static int bay_write(char *buf) +{ + char *cmd; + + if (!bay_eject_supported && !bay_eject2_supported) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (bay_eject_supported && strlencmp(cmd, "eject") == 0) { + if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1)) + return -EIO; + } else if (bay_eject2_supported && + strlencmp(cmd, "eject2") == 0) { + if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1)) + return -EIO; + } else + return -EINVAL; + } + + return 0; +} +#endif /* CONFIG_ACPI_IBM_BAY */ + +/************************************************************************* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd) +{ + if (cmos_handle) + return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd); + else + return 1; +} + +static int cmos_read(char *p) +{ + int len = 0; + + /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + R30, R31, T20-22, X20-21 */ + if (!cmos_handle) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else { + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "commands:\t ( is 0-21)\n"); + } + + return len; +} + +static int cmos_write(char *buf) +{ + char *cmd; + int cmos_cmd; + + if (!cmos_handle) + return -EINVAL; + + while ((cmd = next_cmd(&buf))) { + if (sscanf(cmd, "%u", &cmos_cmd) == 1 && + cmos_cmd >= 0 && cmos_cmd <= 21) { + /* cmos_cmd set */ + } else + return -EINVAL; + + if (!cmos_eval(cmos_cmd)) + return -EIO; + } + + return 0; +} + + +/************************************************************************* + * LED subdriver + */ + +static enum led_access_mode led_supported; + +IBM_HANDLE(led, ec, "SLED", /* 570 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "LED", /* all others */ + ); /* R30, R31 */ + +static int led_init(void) +{ + if (!led_handle) + /* led not supported on R30, R31 */ + led_supported = IBMACPI_LED_NONE; + else if (strlencmp(led_path, "SLED") == 0) + /* 570 */ + led_supported = IBMACPI_LED_570; + else if (strlencmp(led_path, "SYSL") == 0) + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + led_supported = IBMACPI_LED_OLD; + else + /* all others */ + led_supported = IBMACPI_LED_NEW; + + return 0; +} + +#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking")) + +static int led_read(char *p) +{ + int len = 0; + + if (!led_supported) { + len += sprintf(p + len, "status:\t\tnot supported\n"); + return len; + } + len += sprintf(p + len, "status:\t\tsupported\n"); + + if (led_supported == IBMACPI_LED_570) { + /* 570 */ + int i, status; + for (i = 0; i < 8; i++) { + if (!acpi_evalf(ec_handle, + &status, "GLED", "dd", 1 << i)) + return -EIO; + len += sprintf(p + len, "%d:\t\t%s\n", + i, led_status(status)); + } + } + + len += sprintf(p + len, "commands:\t" + " on, off, blink ( is 0-7)\n"); + + return len; +} + +/* off, on, blink */ +static const int led_sled_arg1[] = { 0, 1, 3 }; +static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ +static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ +static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; + +static int led_write(char *buf) +{ + char *cmd; + int led, ind, ret; + + if (!led_supported) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7) + return -EINVAL; + + if (strstr(cmd, "off")) { + ind = 0; + } else if (strstr(cmd, "on")) { + ind = 1; + } else if (strstr(cmd, "blink")) { + ind = 2; + } else + return -EINVAL; + + if (led_supported == IBMACPI_LED_570) { + /* 570 */ + led = 1 << led; + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_sled_arg1[ind])) + return -EIO; + } else if (led_supported == IBMACPI_LED_OLD) { + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ + led = 1 << led; + ret = ec_write(IBMACPI_LED_EC_HLMS, led); + if (ret >= 0) + ret = + ec_write(IBMACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); + if (ret >= 0) + ret = + ec_write(IBMACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); + if (ret < 0) + return ret; + } else { + /* all others */ + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_led_arg1[ind])) + return -EIO; + } + } + + return 0; +} + +/************************************************************************* + * Beep subdriver + */ + +IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ + +static int beep_read(char *p) +{ + int len = 0; + + if (!beep_handle) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else { + len += sprintf(p + len, "status:\t\tsupported\n"); + len += sprintf(p + len, "commands:\t ( is 0-17)\n"); + } + + return len; +} + +static int beep_write(char *buf) +{ + char *cmd; + int beep_cmd; + + if (!beep_handle) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (sscanf(cmd, "%u", &beep_cmd) == 1 && + beep_cmd >= 0 && beep_cmd <= 17) { + /* beep_cmd set */ + } else + return -EINVAL; + if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0)) + return -EIO; + } + + return 0; +} + +/************************************************************************* + * Thermal subdriver + */ + +static enum thermal_access_mode thermal_read_mode; + +static int thermal_init(void) +{ + u8 t, ta1, ta2; + int i; + int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv"); + + if (ibm_thinkpad_ec_found && experimental) { + /* + * Direct EC access mode: sensors at registers + * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for + * non-implemented, thermal sensors return 0x80 when + * not available + */ + + ta1 = ta2 = 0; + for (i = 0; i < 8; i++) { + if (likely(acpi_ec_read(0x78 + i, &t))) { + ta1 |= t; + } else { + ta1 = 0; + break; + } + if (likely(acpi_ec_read(0xC0 + i, &t))) { + ta2 |= t; + } else { + ta1 = 0; + break; + } + } + if (ta1 == 0) { + /* This is sheer paranoia, but we handle it anyway */ + if (acpi_tmp7) { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "falling back to ACPI TMPx access mode\n"); + thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; + } else { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "disabling thermal sensors access\n"); + thermal_read_mode = IBMACPI_THERMAL_NONE; + } + } else { + thermal_read_mode = + (ta2 != 0) ? + IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8; + } + } else if (acpi_tmp7) { + if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) { + /* 600e/x, 770e, 770x */ + thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT; + } else { + /* Standard ACPI TMPx access, max 8 sensors */ + thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; + } + } else { + /* temperatures not supported on 570, G4x, R30, R31, R32 */ + thermal_read_mode = IBMACPI_THERMAL_NONE; + } + + return 0; +} + +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) +{ + int i, t; + s8 tmp; + char tmpi[] = "TMPi"; + + if (!s) + return -EINVAL; + + switch (thermal_read_mode) { +#if IBMACPI_MAX_THERMAL_SENSORS >= 16 + case IBMACPI_THERMAL_TPEC_16: + for (i = 0; i < 8; i++) { + if (!acpi_ec_read(0xC0 + i, &tmp)) + return -EIO; + s->temp[i + 8] = tmp * 1000; + } + /* fallthrough */ +#endif + case IBMACPI_THERMAL_TPEC_8: + for (i = 0; i < 8; i++) { + if (!acpi_ec_read(0x78 + i, &tmp)) + return -EIO; + s->temp[i] = tmp * 1000; + } + return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8; + + case IBMACPI_THERMAL_ACPI_UPDT: + if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) + return -EIO; + for (i = 0; i < 8; i++) { + tmpi[3] = '0' + i; + if (!acpi_evalf(ec_handle, &t, tmpi, "d")) + return -EIO; + s->temp[i] = (t - 2732) * 100; + } + return 8; + + case IBMACPI_THERMAL_ACPI_TMP07: + for (i = 0; i < 8; i++) { + tmpi[3] = '0' + i; + if (!acpi_evalf(ec_handle, &t, tmpi, "d")) + return -EIO; + s->temp[i] = t * 1000; + } + return 8; + + case IBMACPI_THERMAL_NONE: + default: + return 0; + } +} + +static int thermal_read(char *p) +{ + int len = 0; + int n, i; + struct ibm_thermal_sensors_struct t; + + n = thermal_get_sensors(&t); + if (unlikely(n < 0)) + return n; + + len += sprintf(p + len, "temperatures:\t"); + + if (n > 0) { + for (i = 0; i < (n - 1); i++) + len += sprintf(p + len, "%d ", t.temp[i] / 1000); + len += sprintf(p + len, "%d\n", t.temp[i] / 1000); + } else + len += sprintf(p + len, "not supported\n"); + + return len; +} + +/************************************************************************* + * EC Dump subdriver + */ + +static u8 ecdump_regs[256]; + +static int ecdump_read(char *p) +{ + int len = 0; + int i, j; + u8 v; + + len += sprintf(p + len, "EC " + " +00 +01 +02 +03 +04 +05 +06 +07" + " +08 +09 +0a +0b +0c +0d +0e +0f\n"); + for (i = 0; i < 256; i += 16) { + len += sprintf(p + len, "EC 0x%02x:", i); + for (j = 0; j < 16; j++) { + if (!acpi_ec_read(i + j, &v)) + break; + if (v != ecdump_regs[i + j]) + len += sprintf(p + len, " *%02x", v); + else + len += sprintf(p + len, " %02x", v); + ecdump_regs[i + j] = v; + } + len += sprintf(p + len, "\n"); + if (j != 16) + break; + } + + /* These are way too dangerous to advertise openly... */ +#if 0 + len += sprintf(p + len, "commands:\t0x 0x" + " ( is 00-ff, is 00-ff)\n"); + len += sprintf(p + len, "commands:\t0x " + " ( is 00-ff, is 0-255)\n"); +#endif + return len; +} + +static int ecdump_write(char *buf) +{ + char *cmd; + int i, v; + + while ((cmd = next_cmd(&buf))) { + if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) { + /* i and v set */ + } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) { + /* i and v set */ + } else + return -EINVAL; + if (i >= 0 && i < 256 && v >= 0 && v < 256) { + if (!acpi_ec_write(i, v)) + return -EIO; + } else + return -EINVAL; + } + + return 0; +} + +/************************************************************************* + * Backlight/brightness subdriver + */ + +static struct backlight_device *ibm_backlight_device = NULL; + +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; + +static int brightness_init(void) +{ + int b; + + b = brightness_get(NULL); + if (b < 0) + return b; + + ibm_backlight_device = backlight_device_register("ibm", NULL, NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.brightness = b; + backlight_update_status(ibm_backlight_device); + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set( + (bd->props.fb_blank == FB_BLANK_UNBLANK && + bd->props.power == FB_BLANK_UNBLANK) ? + bd->props.brightness : 0); +} + +static int brightness_get(struct backlight_device *bd) +{ + u8 level; + if (!acpi_ec_read(brightness_offset, &level)) + return -EIO; + + level &= 0x7; + + return level; +} + +static int brightness_set(int value) +{ + int cmos_cmd, inc, i; + int current_value = brightness_get(NULL); + + value &= 7; + + cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; + inc = value > current_value ? 1 : -1; + for (i = current_value; i != value; i += inc) { + if (!cmos_eval(cmos_cmd)) + return -EIO; + if (!acpi_ec_write(brightness_offset, i + inc)) + return -EIO; + } + + return 0; +} + +static int brightness_read(char *p) +{ + int len = 0; + int level; + + if ((level = brightness_get(NULL)) < 0) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "commands:\tup, down\n"); + len += sprintf(p + len, "commands:\tlevel " + " ( is 0-7)\n"); + } + + return len; +} + +static int brightness_write(char *buf) +{ + int level; + int new_level; + char *cmd; + + while ((cmd = next_cmd(&buf))) { + if ((level = brightness_get(NULL)) < 0) + return level; + level &= 7; + + if (strlencmp(cmd, "up") == 0) { + new_level = level == 7 ? 7 : level + 1; + } else if (strlencmp(cmd, "down") == 0) { + new_level = level == 0 ? 0 : level - 1; + } else if (sscanf(cmd, "level %d", &new_level) == 1 && + new_level >= 0 && new_level <= 7) { + /* new_level set */ + } else + return -EINVAL; + + brightness_set(new_level); + } + + return 0; +} + +/************************************************************************* + * Volume subdriver + */ + +static int volume_read(char *p) +{ + int len = 0; + u8 level; + + if (!acpi_ec_read(volume_offset, &level)) { + len += sprintf(p + len, "level:\t\tunreadable\n"); + } else { + len += sprintf(p + len, "level:\t\t%d\n", level & 0xf); + len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6)); + len += sprintf(p + len, "commands:\tup, down, mute\n"); + len += sprintf(p + len, "commands:\tlevel " + " ( is 0-15)\n"); + } + + return len; +} + +static int volume_write(char *buf) +{ + int cmos_cmd, inc, i; + u8 level, mute; + int new_level, new_mute; + char *cmd; + + while ((cmd = next_cmd(&buf))) { + if (!acpi_ec_read(volume_offset, &level)) + return -EIO; + new_mute = mute = level & 0x40; + new_level = level = level & 0xf; + + if (strlencmp(cmd, "up") == 0) { + if (mute) + new_mute = 0; + else + new_level = level == 15 ? 15 : level + 1; + } else if (strlencmp(cmd, "down") == 0) { + if (mute) + new_mute = 0; + else + new_level = level == 0 ? 0 : level - 1; + } else if (sscanf(cmd, "level %d", &new_level) == 1 && + new_level >= 0 && new_level <= 15) { + /* new_level set */ + } else if (strlencmp(cmd, "mute") == 0) { + new_mute = 0x40; + } else + return -EINVAL; + + if (new_level != level) { /* mute doesn't change */ + cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + inc = new_level > level ? 1 : -1; + + if (mute && (!cmos_eval(cmos_cmd) || + !acpi_ec_write(volume_offset, level))) + return -EIO; + + for (i = level; i != new_level; i += inc) + if (!cmos_eval(cmos_cmd) || + !acpi_ec_write(volume_offset, i + inc)) + return -EIO; + + if (mute && (!cmos_eval(TP_CMOS_VOLUME_MUTE) || + !acpi_ec_write(volume_offset, + new_level + mute))) + return -EIO; + } + + if (new_mute != mute) { /* level doesn't change */ + cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + + if (!cmos_eval(cmos_cmd) || + !acpi_ec_write(volume_offset, level + new_mute)) + return -EIO; + } + } + + return 0; +} + + +/************************************************************************* + * Fan subdriver + */ + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; + +static int fan_control_status_known; +static u8 fan_control_initial_status; + +static void fan_watchdog_fire(struct work_struct *ignored); +static int fan_watchdog_maxinterval; +static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); + +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ + "\\FSPD", /* 600e/x, 770e, 770x */ + ); /* all others */ +IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ + "JFNS", /* 770x-JL */ + ); /* all others */ + +static int fan_init(void) +{ + fan_status_access_mode = IBMACPI_FAN_NONE; + fan_control_access_mode = IBMACPI_FAN_WR_NONE; + fan_control_commands = 0; + fan_control_status_known = 1; + fan_watchdog_maxinterval = 0; + + if (gfan_handle) { + /* 570, 600e/x, 770e, 770x */ + fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN; + } else { + /* all other ThinkPads: note that even old-style + * ThinkPad ECs supports the fan control register */ + if (likely(acpi_ec_read(fan_status_offset, + &fan_control_initial_status))) { + fan_status_access_mode = IBMACPI_FAN_RD_TPEC; + + /* In some ThinkPads, neither the EC nor the ACPI + * DSDT initialize the fan status, and it ends up + * being set to 0x07 when it *could* be either + * 0x07 or 0x80. + * + * Enable for TP-1Y (T43), TP-78 (R51e), + * TP-76 (R52), TP-70 (T43, R52), which are known + * to be buggy. */ + if (fan_control_initial_status == 0x07 && + ibm_thinkpad_ec_found && + ((ibm_thinkpad_ec_found[0] == '1' && + ibm_thinkpad_ec_found[1] == 'Y') || + (ibm_thinkpad_ec_found[0] == '7' && + (ibm_thinkpad_ec_found[1] == '6' || + ibm_thinkpad_ec_found[1] == '8' || + ibm_thinkpad_ec_found[1] == '0')) + )) { + printk(IBM_NOTICE + "fan_init: initial fan status is " + "unknown, assuming it is in auto " + "mode\n"); + fan_control_status_known = 0; + } + } else { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "fan status and control unavailable\n"); + return 0; + } + } + + if (sfan_handle) { + /* 570, 770x-JL */ + fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN; + fan_control_commands |= + IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE; + } else { + if (!gfan_handle) { + /* gfan without sfan means no fan control */ + /* all other models implement TP EC 0x2f control */ + + if (fans_handle) { + /* X31, X40, X41 */ + fan_control_access_mode = + IBMACPI_FAN_WR_ACPI_FANS; + fan_control_commands |= + IBMACPI_FAN_CMD_SPEED | + IBMACPI_FAN_CMD_LEVEL | + IBMACPI_FAN_CMD_ENABLE; + } else { + fan_control_access_mode = IBMACPI_FAN_WR_TPEC; + fan_control_commands |= + IBMACPI_FAN_CMD_LEVEL | + IBMACPI_FAN_CMD_ENABLE; + } + } + } + + return 0; +} + +static int fan_get_status(u8 *status) +{ + u8 s; + + /* TODO: + * Add IBMACPI_FAN_RD_ACPI_FANS ? */ + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + + if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) + return -EIO; + + if (likely(status)) + *status = s & 0x07; + + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!acpi_ec_read(fan_status_offset, &s))) + return -EIO; + + if (likely(status)) + *status = s; + + break; + + default: + return -ENXIO; + } + + return 0; +} + +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + +static int fan_get_speed(unsigned int *speed) +{ + u8 hi, lo; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || + !acpi_ec_read(fan_rpm_offset + 1, &hi))) + return -EIO; + + if (likely(speed)) + *speed = (hi << 8) | lo; + + break; + + default: + return -ENXIO; + } + + return 0; +} + +static void fan_watchdog_fire(struct work_struct *ignored) +{ + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } +} + +static void fan_watchdog_reset(void) +{ + static int fan_watchdog_active = 0; + + if (fan_watchdog_active) + cancel_delayed_work(&fan_watchdog_task); + + if (fan_watchdog_maxinterval > 0) { + fan_watchdog_active = 1; + if (!schedule_delayed_work(&fan_watchdog_task, + msecs_to_jiffies(fan_watchdog_maxinterval + * 1000))) { + printk(IBM_ERR "failed to schedule the fan watchdog, " + "watchdog will not trigger\n"); + } + } else + fan_watchdog_active = 0; +} + +static int fan_set_level(int level) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + if (level >= 0 && level <= 7) { + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) + return -EIO; + } else + return -EINVAL; + break; + + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if ((level != IBMACPI_FAN_EC_AUTO) && + (level != IBMACPI_FAN_EC_DISENGAGED) && + ((level < 0) || (level > 7))) + return -EINVAL; + + if (!acpi_ec_write(fan_status_offset, level)) + return -EIO; + else + fan_control_status_known = 1; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_enable(void) +{ + u8 s; + int rc; + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if ((rc = fan_get_status(&s)) < 0) + return rc; + + /* Don't go out of emergency fan mode */ + if (s != 7) + s = IBMACPI_FAN_EC_AUTO; + + if (!acpi_ec_write(fan_status_offset, s)) + return -EIO; + else + fan_control_status_known = 1; + break; + + case IBMACPI_FAN_WR_ACPI_SFAN: + if ((rc = fan_get_status(&s)) < 0) + return rc; + + s &= 0x07; + + /* Set fan to at least level 4 */ + if (s < 4) + s = 4; + + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) + return -EIO; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_disable(void) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if (!acpi_ec_write(fan_status_offset, 0x00)) + return -EIO; + else + fan_control_status_known = 1; + break; + + case IBMACPI_FAN_WR_ACPI_SFAN: + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) + return -EIO; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_speed(int speed) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + if (speed >= 0 && speed <= 65535) { + if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", + speed, speed, speed)) + return -EIO; + } else + return -EINVAL; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel "); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " ( is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " ( is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog ( is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) + len += sprintf(p + len, "commands:\tspeed " + " ( is 0-65535)\n"); + + return len; +} + +static int fan_write_cmd_level(const char *cmd, int *rc) +{ + int level; + + if (strlencmp(cmd, "level auto") == 0) + level = IBMACPI_FAN_EC_AUTO; + else if (strlencmp(cmd, "level disengaged") == 0) + level = IBMACPI_FAN_EC_DISENGAGED; + else if (sscanf(cmd, "level %d", &level) != 1) + return 0; + + if ((*rc = fan_set_level(level)) == -ENXIO) + printk(IBM_ERR "level command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_enable(const char *cmd, int *rc) +{ + if (strlencmp(cmd, "enable") != 0) + return 0; + + if ((*rc = fan_set_enable()) == -ENXIO) + printk(IBM_ERR "enable command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_disable(const char *cmd, int *rc) +{ + if (strlencmp(cmd, "disable") != 0) + return 0; + + if ((*rc = fan_set_disable()) == -ENXIO) + printk(IBM_ERR "disable command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_speed(const char *cmd, int *rc) +{ + int speed; + + /* TODO: + * Support speed ? */ + + if (sscanf(cmd, "speed %d", &speed) != 1) + return 0; + + if ((*rc = fan_set_speed(speed)) == -ENXIO) + printk(IBM_ERR "speed command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_watchdog(const char *cmd, int *rc) +{ + int interval; + + if (sscanf(cmd, "watchdog %d", &interval) != 1) + return 0; + + if (interval < 0 || interval > 120) + *rc = -EINVAL; + else + fan_watchdog_maxinterval = interval; + + return 1; +} + +static int fan_write(char *buf) +{ + char *cmd; + int rc = 0; + + while (!rc && (cmd = next_cmd(&buf))) { + if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) && + fan_write_cmd_level(cmd, &rc)) && + !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) && + (fan_write_cmd_enable(cmd, &rc) || + fan_write_cmd_disable(cmd, &rc) || + fan_write_cmd_watchdog(cmd, &rc))) && + !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) && + fan_write_cmd_speed(cmd, &rc)) + ) + rc = -EINVAL; + else if (!rc) + fan_watchdog_reset(); + } + + return rc; +} + +/**************************************************************************** + **************************************************************************** + * + * Infrastructure + * + **************************************************************************** + ****************************************************************************/ + +/* /proc support */ +static struct proc_dir_entry *proc_dir = NULL; + +/* Subdriver registry */ +static struct ibm_struct ibms[] = { + { + .name = "driver", + .init = ibm_acpi_driver_init, + .read = ibm_acpi_driver_read, + }, + { + .name = "hotkey", + .hid = IBM_HKEY_HID, + .init = hotkey_init, + .read = hotkey_read, + .write = hotkey_write, + .exit = hotkey_exit, + .notify = hotkey_notify, + .handle = &hkey_handle, + .type = ACPI_DEVICE_NOTIFY, + }, + { + .name = "bluetooth", + .init = bluetooth_init, + .read = bluetooth_read, + .write = bluetooth_write, + }, + { + .name = "wan", + .init = wan_init, + .read = wan_read, + .write = wan_write, + .experimental = 1, + }, + { + .name = "video", + .init = video_init, + .read = video_read, + .write = video_write, + .exit = video_exit, + }, + { + .name = "light", + .init = light_init, + .read = light_read, + .write = light_write, + }, +#ifdef CONFIG_ACPI_IBM_DOCK + { + .name = "dock", + .read = dock_read, + .write = dock_write, + .notify = dock_notify, + .handle = &dock_handle, + .type = ACPI_SYSTEM_NOTIFY, + }, + { + .name = "dock", + .hid = IBM_PCI_HID, + .notify = dock_notify, + .handle = &pci_handle, + .type = ACPI_SYSTEM_NOTIFY, + }, +#endif +#ifdef CONFIG_ACPI_IBM_BAY + { + .name = "bay", + .init = bay_init, + .read = bay_read, + .write = bay_write, + .notify = bay_notify, + .handle = &bay_handle, + .type = ACPI_SYSTEM_NOTIFY, + }, +#endif /* CONFIG_ACPI_IBM_BAY */ + { + .name = "cmos", + .read = cmos_read, + .write = cmos_write, + }, + { + .name = "led", + .init = led_init, + .read = led_read, + .write = led_write, + }, + { + .name = "beep", + .read = beep_read, + .write = beep_write, + }, + { + .name = "thermal", + .init = thermal_init, + .read = thermal_read, + }, + { + .name = "ecdump", + .read = ecdump_read, + .write = ecdump_write, + .experimental = 1, + }, + { + .name = "brightness", + .read = brightness_read, + .write = brightness_write, + .init = brightness_init, + .exit = brightness_exit, + }, + { + .name = "volume", + .read = volume_read, + .write = volume_write, + }, + { + .name = "fan", + .read = fan_read, + .write = fan_write, + .init = fan_init, + .exit = fan_exit, + .experimental = 1, + }, +}; + +/* + * Module and infrastructure proble, init and exit handling + */ + +static int __init ibm_init(struct ibm_struct *ibm) +{ + int ret; + struct proc_dir_entry *entry; + + if (ibm->experimental && !experimental) + return 0; + + if (ibm->hid) { + ret = register_ibmacpi_subdriver(ibm); + if (ret < 0) + return ret; + ibm->driver_registered = 1; + } + + if (ibm->init) { + ret = ibm->init(); + if (ret != 0) + return ret; + ibm->init_called = 1; + } + + if (ibm->read) { + entry = create_proc_entry(ibm->name, + S_IFREG | S_IRUGO | S_IWUSR, + proc_dir); + if (!entry) { + printk(IBM_ERR "unable to create proc entry %s\n", + ibm->name); + return -ENODEV; + } + entry->owner = THIS_MODULE; + entry->data = ibm; + entry->read_proc = &dispatch_read; + if (ibm->write) + entry->write_proc = &dispatch_write; + ibm->proc_created = 1; + } + + if (ibm->notify) { + ret = setup_notify(ibm); + if (ret == -ENODEV) { + printk(IBM_NOTICE "disabling subdriver %s\n", + ibm->name); + ibm_exit(ibm); + return 0; + } + if (ret < 0) + return ret; + } + + return 0; +} + +static void ibm_exit(struct ibm_struct *ibm) +{ + if (ibm->notify_installed) + acpi_remove_notify_handler(*ibm->handle, ibm->type, + dispatch_notify); + + if (ibm->proc_created) + remove_proc_entry(ibm->name, proc_dir); + + if (ibm->init_called && ibm->exit) + ibm->exit(); + + if (ibm->driver_registered) { + acpi_bus_unregister_driver(ibm->driver); + kfree(ibm->driver); + } +} + +/* Probing */ + +static char *ibm_thinkpad_ec_found = NULL; + +static char* __init check_dmi_for_ec(void) +{ + struct dmi_device *dev = NULL; + char ec_fw_string[18]; + + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); + } + } + return NULL; +} + +/* Module init, exit, parameters */ + +static int __init set_ibm_param(const char *val, struct kernel_param *kp) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ibms); i++) + if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) { + if (strlen(val) > sizeof(ibms[i].param) - 2) + return -ENOSPC; + strcpy(ibms[i].param, val); + strcat(ibms[i].param, ","); + return 0; + } + + return -EINVAL; +} + +static int experimental; +module_param(experimental, int, 0); + +#define IBM_PARAM(feature) \ + module_param_call(feature, set_ibm_param, NULL, NULL, 0) + +IBM_PARAM(hotkey); +IBM_PARAM(bluetooth); +IBM_PARAM(video); +IBM_PARAM(light); +#ifdef CONFIG_ACPI_IBM_DOCK +IBM_PARAM(dock); +#endif +#ifdef CONFIG_ACPI_IBM_BAY +IBM_PARAM(bay); +#endif /* CONFIG_ACPI_IBM_BAY */ +IBM_PARAM(cmos); +IBM_PARAM(led); +IBM_PARAM(beep); +IBM_PARAM(ecdump); +IBM_PARAM(brightness); +IBM_PARAM(volume); +IBM_PARAM(fan); + +static int __init acpi_ibm_init(void) +{ + int ret, i; + + if (acpi_disabled) + return -ENODEV; + + /* ec is required because many other handles are relative to it */ + IBM_HANDLE_INIT(ec); + if (!ec_handle) { + printk(IBM_ERR "ec object not found\n"); + return -ENODEV; + } + + /* Models with newer firmware report the EC in DMI */ + ibm_thinkpad_ec_found = check_dmi_for_ec(); + + /* these handles are not required */ + IBM_HANDLE_INIT(vid); + IBM_HANDLE_INIT(vid2); + IBM_HANDLE_INIT(ledb); + IBM_HANDLE_INIT(led); + IBM_HANDLE_INIT(hkey); + IBM_HANDLE_INIT(lght); + IBM_HANDLE_INIT(cmos); +#ifdef CONFIG_ACPI_IBM_DOCK + IBM_HANDLE_INIT(dock); +#endif + IBM_HANDLE_INIT(pci); +#ifdef CONFIG_ACPI_IBM_BAY + IBM_HANDLE_INIT(bay); + if (bay_handle) + IBM_HANDLE_INIT(bay_ej); + IBM_HANDLE_INIT(bay2); + if (bay2_handle) + IBM_HANDLE_INIT(bay2_ej); +#endif /* CONFIG_ACPI_IBM_BAY */ + IBM_HANDLE_INIT(beep); + IBM_HANDLE_INIT(ecrd); + IBM_HANDLE_INIT(ecwr); + IBM_HANDLE_INIT(fans); + IBM_HANDLE_INIT(gfan); + IBM_HANDLE_INIT(sfan); + + proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir); + if (!proc_dir) { + printk(IBM_ERR "unable to create proc dir %s", IBM_DIR); + acpi_ibm_exit(); + return -ENODEV; + } + proc_dir->owner = THIS_MODULE; + + for (i = 0; i < ARRAY_SIZE(ibms); i++) { + ret = ibm_init(&ibms[i]); + if (ret >= 0 && *ibms[i].param) + ret = ibms[i].write(ibms[i].param); + if (ret < 0) { + acpi_ibm_exit(); + return ret; + } + } + + return 0; +} + +static void acpi_ibm_exit(void) +{ + int i; + + for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--) + ibm_exit(&ibms[i]); + + if (proc_dir) + remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + +module_init(acpi_ibm_init); +module_exit(acpi_ibm_exit); diff --git a/drivers/misc/ibm_acpi.h b/drivers/misc/ibm_acpi.h new file mode 100644 index 000000000000..7ebaaa40e183 --- /dev/null +++ b/drivers/misc/ibm_acpi.h @@ -0,0 +1,437 @@ +/* + * ibm_acpi.h - IBM ThinkPad ACPI Extras + * + * + * Copyright (C) 2004-2005 Borislav Deianov + * Copyright (C) 2006-2007 Henrique de Moraes Holschuh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __IBM_ACPI_H__ +#define __IBM_ACPI_H__ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "ibm" +#define IBM_DESC "IBM ThinkPad ACPI Extras" +#define IBM_FILE "ibm_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" + +#define IBM_DIR IBM_NAME + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" +#define IBM_PCI_HID "PNP0A03" + +/* ACPI helpers */ +static int acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int acpi_ec_read(int i, u8 * p); +static int acpi_ec_write(int i, u8 v); +static int _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void ibm_handle_init(char *name, + acpi_handle * handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_HANDLE_INIT(object) \ + ibm_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* procfs support */ +static struct proc_dir_entry *proc_dir; +static int ibm_acpi_driver_init(void); +static int ibm_acpi_driver_read(char *p); + +/* procfs helpers */ +static int dispatch_read(char *page, char **start, off_t off, int count, + int *eof, void *data); +static int dispatch_write(struct file *file, const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* Module */ +static int experimental; +static char *ibm_thinkpad_ec_found; + +static char* check_dmi_for_ec(void); +static int acpi_ibm_init(void); +static void acpi_ibm_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +struct ibm_struct { + char *name; + char param[32]; + + char *hid; + struct acpi_driver *driver; + + int (*init) (void); + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + int type; + struct acpi_device *device; + + int driver_registered; + int proc_created; + int init_called; + int notify_installed; + + int experimental; +}; + +static struct ibm_struct ibms[]; +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int ibm_init(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm); + +/* ACPI devices */ +static void dispatch_notify(acpi_handle handle, u32 event, void *data); +static int setup_notify(struct ibm_struct *ibm); +static int ibm_device_add(struct acpi_device *device); +static int register_ibmacpi_subdriver(struct ibm_struct *ibm); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_ACPI_IBM_BAY +static int bay_status_supported, bay_eject_supported; +static int bay_status2_supported, bay_eject2_supported; + +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(void); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_ACPI_IBM_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +static int bluetooth_supported; + +static int bluetooth_init(void); +static int bluetooth_status(void); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; + +static int brightness_init(void); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_eval(int cmos_cmd); +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +static acpi_handle pci_handle; +#ifdef CONFIG_ACPI_IBM_DOCK +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_ACPI_IBM_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static int fan_control_status_known; +static u8 fan_control_initial_status; +static int fan_watchdog_maxinterval; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(void); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +static int hotkey_supported; +static int hotkey_mask_supported; +static int hotkey_orig_status; +static int hotkey_orig_mask; + +static int hotkey_init(void); +static void hotkey_exit(void); +static int hotkey_get(int *status, int *mask); +static int hotkey_set(int status, int mask); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; + +enum { /* For IBMACPI_LED_OLD */ + IBMACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + IBMACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + IBMACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(void); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static int light_supported; +static int light_status_supported; +static acpi_handle lght_handle, ledb_handle; + +static int light_init(void); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +static int thermal_init(void); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(void); +static void video_exit(void); +static int video_status(void); +static int video_autosw(void); +static int video_switch(void); +static int video_switch2(int status); +static int video_expand(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +static int wan_supported; + +static int wan_init(void); +static int wan_status(void); +static int wan_read(char *p); +static int wan_write(char *buf); + + +#endif /* __IBM_ACPI_H */ -- cgit