From d79df329d0bd425c00856915b7b12f54dd100154 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:58:58 +0000 Subject: regulator: ab8500: Further populate initialisation registers This patch supplies access to some extra settings provided by the AB8500 regulator device. We also update some of the existing initialisation values in accordance with internal ST-Ericsson code submissions. This single patch was originally a collection of updates which have been squashed together to aid with clarity. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 40 +++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a17bc506cff..4b3c51905071 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -126,6 +126,7 @@ struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest + * VpllRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), @@ -142,12 +143,16 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { */ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), /* + * Vsmps1SysClkReq1HPValid = enabled + * Vsmps2SysClkReq1HPValid = enabled + * Vsmps3SysClkReq1HPValid = enabled * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid = enabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x17), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled @@ -233,6 +238,34 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vamic2_dzout = high-Z when Vamic2 is disabled */ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + /* + * VBBN = force OFF + * VBBP = force OFF + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_ARMREGU2, 0x00), + /* + * VBBNSel1 = VBBP = VBBPFB + * VBBPSel1 = 0 V + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_VBBSEL1, 0x00), + /* + * VBBNSel2 = VBBP = VBBPFB + * VBBPSel2 = 0 V + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_VBBSEL2, 0x00), + /* + * Vsmps1Regu = HW control + * Vsmps1SelCtrl = Vsmps1 voltage defined by Vsmsp1Sel2 + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x06), + /* + * Vsmps2Regu = HW control + * Vsmps2SelCtrl = Vsmps2 voltage defined by Vsmsp2Sel2 + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x06), /* * VPll = Hw controlled * VanaRegu = force off @@ -257,9 +290,10 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { */ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), /* - * Vaux3regu = force off + * Vrf1Regu = HW control + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x08), /* * Vsmps1 = 1.15V */ -- cgit From 3c1b8438d4bc99269aba560739e3e6cb640584f4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:01 +0000 Subject: ARM: ux500: regulators: Add mask for configuration There is already before a register mask in the regulator driver to allow some bits of a register to be initialized. The register value is defined in the board configuration. This patch puts a mask in the board configuration to specify which bits should actually be altered. The purpose with this patch is to avoid future mistakes when updating the allowed bits in the regulator driver. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 66 +++++++++++++-------------- drivers/regulator/ab8500.c | 36 ++++++--------- include/linux/regulator/ab8500.h | 10 ++-- 3 files changed, 53 insertions(+), 59 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 4b3c51905071..96dd17490bea 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -129,19 +129,19 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VpllRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xfc, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest * Vaux1RequestCtrl = HP/LP depending on VxRequest * Vaux2RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), /* * Vaux3RequestCtrl = HP/LP depending on VxRequest * SwHPReq = Control through SWValid disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* * Vsmps1SysClkReq1HPValid = enabled * Vsmps2SysClkReq1HPValid = enabled @@ -152,44 +152,44 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x17), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xff, 0x17), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), /* * VanaHwHPReq1Valid = disabled * Vaux1HwHPreq1Valid = disabled * Vaux2HwHPReq1Valid = disabled * Vaux3HwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq1Valid = disabled * VextSupply2HwHPReq1Valid = disabled * VextSupply3HwHPReq1Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), /* * VanaHwHPReq2Valid = disabled * Vaux1HwHPReq2Valid = disabled * Vaux2HwHPReq2Valid = disabled * Vaux3HwHPReq2Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq2Valid = disabled * VextSupply2HwHPReq2Valid = disabled * VextSupply3HwHPReq2Valid = HWReq2 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), /* * VanaSwHPReqValid = disabled * Vaux1SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), /* * Vaux2SwHPReqValid = disabled * Vaux3SwHPReqValid = disabled @@ -197,7 +197,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VextSupply2SwHPReqValid = disabled * VextSupply3SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), /* * SysClkReq2Valid1 = SysClkReq2 controlled * SysClkReq3Valid1 = disabled @@ -207,7 +207,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid1 = disabled * SysClkReq8Valid1 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), /* * SysClkReq2Valid2 = disabled * SysClkReq3Valid2 = disabled @@ -217,7 +217,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid2 = disabled * SysClkReq8Valid2 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), /* * VTVoutEna = disabled * Vintcore12Ena = disabled @@ -225,57 +225,57 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vintcore12LP = inactive (HP) * VTVoutLP = inactive (HP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), /* * VaudioEna = disabled * VdmicEna = disabled * Vamic1Ena = disabled * Vamic2Ena = disabled */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), /* * Vamic1_dzout = high-Z when Vamic1 is disabled * Vamic2_dzout = high-Z when Vamic2 is disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* * VBBN = force OFF * VBBP = force OFF * NOTE! PRCMU register */ - INIT_REGULATOR_REGISTER(AB8500_ARMREGU2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_ARMREGU2, 0x0f, 0x00), /* * VBBNSel1 = VBBP = VBBPFB * VBBPSel1 = 0 V * NOTE! PRCMU register */ - INIT_REGULATOR_REGISTER(AB8500_VBBSEL1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VBBSEL1, 0x0f, 0x00), /* * VBBNSel2 = VBBP = VBBPFB * VBBPSel2 = 0 V * NOTE! PRCMU register */ - INIT_REGULATOR_REGISTER(AB8500_VBBSEL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VBBSEL2, 0x0f, 0x00), /* * Vsmps1Regu = HW control * Vsmps1SelCtrl = Vsmps1 voltage defined by Vsmsp1Sel2 */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x06), + INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x0f, 0x06), /* * Vsmps2Regu = HW control * Vsmps2SelCtrl = Vsmps2 voltage defined by Vsmsp2Sel2 */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x06), + INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x0f, 0x06), /* * VPll = Hw controlled * VanaRegu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), /* * VrefDDREna = disabled * VrefDDRSleepMode = inactive (no pulldown) */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* * VextSupply1Regu = HW control * VextSupply2Regu = HW control @@ -283,37 +283,37 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x1a), /* * Vaux1Regu = force HP * Vaux2Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* * Vrf1Regu = HW control * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x0f, 0x08), /* * Vsmps1 = 1.15V */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x3f, 0x24), /* * Vaux1Sel = 2.5 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x08), /* * Vaux2Sel = 2.9 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), /* * Vaux3Sel = 2.91 V */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), /* * VextSupply12LP = disabled (no LP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), /* * Vaux1Disch = short discharge time * Vaux2Disch = short discharge time @@ -322,13 +322,13 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VTVoutDisch = short discharge time * VaudioDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), /* * VanaDisch = short discharge time * VdmicPullDownEna = pulldown disabled when Vdmic is disabled * VdmicDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), }; /* AB8500 regulators */ diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 3465ac38bffe..a847744f8c20 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -811,23 +811,20 @@ static struct ab8500_reg_init ab8500_reg_init[] = { REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16), }; -static int -ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value) +static int ab8500_regulator_init_registers(struct platform_device *pdev, + int id, int mask, int value) { int err; - if (value & ~ab8500_reg_init[id].mask) { - dev_err(&pdev->dev, - "Configuration error: value outside mask.\n"); - return -EINVAL; - } + BUG_ON(value & ~mask); + BUG_ON(mask & ~ab8500_reg_init[id].mask); + /* initialize register */ err = abx500_mask_and_set_register_interruptible( &pdev->dev, ab8500_reg_init[id].bank, ab8500_reg_init[id].addr, - ab8500_reg_init[id].mask, - value); + mask, value); if (err < 0) { dev_err(&pdev->dev, "Failed to initialize 0x%02x, 0x%02x.\n", @@ -835,13 +832,11 @@ ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value) ab8500_reg_init[id].addr); return err; } - dev_vdbg(&pdev->dev, - "init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", - ab8500_reg_init[id].bank, - ab8500_reg_init[id].addr, - ab8500_reg_init[id].mask, - value); + " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", + ab8500_reg_init[id].bank, + ab8500_reg_init[id].addr, + mask, value); return 0; } @@ -960,19 +955,16 @@ static int ab8500_regulator_probe(struct platform_device *pdev) /* initialize registers */ for (i = 0; i < pdata->num_regulator_reg_init; i++) { - int id, value; + int id, mask, value; id = pdata->regulator_reg_init[i].id; + mask = pdata->regulator_reg_init[i].mask; value = pdata->regulator_reg_init[i].value; /* check for configuration errors */ - if (id >= AB8500_NUM_REGULATOR_REGISTERS) { - dev_err(&pdev->dev, - "Configuration error: id outside range.\n"); - return -EINVAL; - } + BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS); - err = ab8500_regulator_init_registers(pdev, id, value); + err = ab8500_regulator_init_registers(pdev, id, mask, value); if (err < 0) return err; } diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 2c6c9625013c..a1d245f13d9c 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -48,13 +48,15 @@ enum ab9540_regulator_id { /* AB8500 and AB9540 register initialization */ struct ab8500_regulator_reg_init { int id; + u8 mask; u8 value; }; -#define INIT_REGULATOR_REGISTER(_id, _value) \ - { \ - .id = _id, \ - .value = _value, \ +#define INIT_REGULATOR_REGISTER(_id, _mask, _value) \ + { \ + .id = _id, \ + .mask = _mask, \ + .value = _value, \ } /* AB8500 registers */ -- cgit From 33bc8f46a8ee3fc1836def9713933435b7ff0b90 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:02 +0000 Subject: regulator: ab8500: Another push to synchronise recent AB8500 developments This patch ensures that many of the recent developments pertaining to the AB8500 regulator device are propagated out into the public arena. It aims to update some of the existing initialisation values in accordance with internal ST-Ericsson code submissions. This single patch was originally a collection of updates which have been squashed together to aid with clarity. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 18 ------ drivers/regulator/ab8500.c | 86 +++++++++++++++++---------- include/linux/regulator/ab8500.h | 21 ++++--- 3 files changed, 65 insertions(+), 60 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 96dd17490bea..a8141e3e8ca1 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -238,24 +238,6 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vamic2_dzout = high-Z when Vamic2 is disabled */ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VBBN = force OFF - * VBBP = force OFF - * NOTE! PRCMU register - */ - INIT_REGULATOR_REGISTER(AB8500_ARMREGU2, 0x0f, 0x00), - /* - * VBBNSel1 = VBBP = VBBPFB - * VBBPSel1 = 0 V - * NOTE! PRCMU register - */ - INIT_REGULATOR_REGISTER(AB8500_VBBSEL1, 0x0f, 0x00), - /* - * VBBNSel2 = VBBP = VBBPFB - * VBBPSel2 = 0 V - * NOTE! PRCMU register - */ - INIT_REGULATOR_REGISTER(AB8500_VBBSEL2, 0x0f, 0x00), /* * Vsmps1Regu = HW control * Vsmps1SelCtrl = Vsmps1 voltage defined by Vsmsp1Sel2 diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index a847744f8c20..c7784c4bff4f 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -613,11 +613,19 @@ struct ab8500_reg_init { static struct ab8500_reg_init ab8500_reg_init[] = { /* - * 0x30, VanaRequestCtrl + * 0x03, VarmRequestCtrl + * 0x0c, VapeRequestCtrl + * 0x30, Vsmps1RequestCtrl + * 0xc0, Vsmps2RequestCtrl + */ + REG_INIT(AB8500_REGUREQUESTCTRL1, 0x03, 0x03, 0xff), + /* + * 0x03, Vsmps3RequestCtrl * 0x0c, VpllRequestCtrl + * 0x30, VanaRequestCtrl * 0xc0, VextSupply1RequestCtrl */ - REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xfc), + REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xff), /* * 0x03, VextSupply2RequestCtrl * 0x0c, VextSupply3RequestCtrl @@ -642,50 +650,71 @@ static struct ab8500_reg_init ab8500_reg_init[] = { */ REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff), /* + * 0x01, VapeSysClkReq1HPValid + * 0x02, VarmSysClkReq1HPValid + * 0x04, VbbSysClkReq1HPValid + * 0x08, VmodSysClkReq1HPValid * 0x10, VextSupply1SysClkReq1HPValid * 0x20, VextSupply2SysClkReq1HPValid * 0x40, VextSupply3SysClkReq1HPValid */ - REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70), + REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f), /* + * 0x01, Vsmps1HwHPReq1Valid + * 0x02, Vsmps2HwHPReq1Valid + * 0x04, Vsmps3HwHPReq1Valid * 0x08, VanaHwHPReq1Valid + * 0x10, VpllHwHPReq1Valid * 0x20, Vaux1HwHPReq1Valid * 0x40, Vaux2HwHPReq1Valid * 0x80, Vaux3HwHPReq1Valid */ - REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8), + REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff), /* * 0x01, VextSupply1HwHPReq1Valid * 0x02, VextSupply2HwHPReq1Valid * 0x04, VextSupply3HwHPReq1Valid + * 0x08, VmodHwHPReq1Valid */ - REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07), + REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f), /* + * 0x01, Vsmps1HwHPReq2Valid + * 0x02, Vsmps2HwHPReq2Valid + * 0x03, Vsmps3HwHPReq2Valid * 0x08, VanaHwHPReq2Valid + * 0x10, VpllHwHPReq2Valid * 0x20, Vaux1HwHPReq2Valid * 0x40, Vaux2HwHPReq2Valid * 0x80, Vaux3HwHPReq2Valid */ - REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8), + REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff), /* * 0x01, VextSupply1HwHPReq2Valid * 0x02, VextSupply2HwHPReq2Valid * 0x04, VextSupply3HwHPReq2Valid + * 0x08, VmodHwHPReq2Valid */ - REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07), + REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f), /* + * 0x01, VapeSwHPReqValid + * 0x02, VarmSwHPReqValid + * 0x04, Vsmps1SwHPReqValid + * 0x08, Vsmps2SwHPReqValid + * 0x10, Vsmps3SwHPReqValid * 0x20, VanaSwHPReqValid + * 0x40, VpllSwHPReqValid * 0x80, Vaux1SwHPReqValid */ - REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0), + REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff), /* * 0x01, Vaux2SwHPReqValid * 0x02, Vaux3SwHPReqValid * 0x04, VextSupply1SwHPReqValid * 0x08, VextSupply2SwHPReqValid * 0x10, VextSupply3SwHPReqValid + * 0x20, VmodSwHPReqValid */ - REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f), + REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f), /* * 0x02, SysClkReq2Valid1 * ... @@ -718,37 +747,23 @@ static struct ab8500_reg_init ab8500_reg_init[] = { * 0x02, Vamic2_dzout */ REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03), - /* - * 0x0c, VBBNRegu - * 0x03, VBBPRegu - * NOTE! PRCMU register - */ - REG_INIT(AB8500_ARMREGU2, 0x04, 0x01, 0x0f), - /* - * 0x0c, VBBPSel1 - * 0x03, VBBNSel1 - * NOTE! PRCMU register - */ - REG_INIT(AB8500_VBBSEL1, 0x04, 0x11, 0x0f), - /* - * 0x0c, VBBNSel2 - * 0x03, VBBPSel2 - * NOTE! PRCMU register - */ - REG_INIT(AB8500_VBBSEL2, 0x04, 0x12, 0x0f), /* * 0x03, Vsmps1Regu * 0x0c, Vsmps1SelCtrl + * 0x10, Vsmps1AutoMode + * 0x20, Vsmps1PWMMode */ - REG_INIT(AB8500_VSMPS1REGU, 0x04, 0x03, 0x0f), + REG_INIT(AB8500_VSMPS1REGU, 0x04, 0x03, 0x3f), /* * 0x03, Vsmps2Regu * 0x0c, Vsmps2SelCtrl + * 0x10, Vsmps2AutoMode + * 0x20, Vsmps2PWMMode */ - REG_INIT(AB8500_VSMPS2REGU, 0x04, 0x04, 0x0f), + REG_INIT(AB8500_VSMPS2REGU, 0x04, 0x04, 0x3f), /* - * 0x0c, VanaRegu * 0x03, VpllRegu + * 0x0c, VanaRegu */ REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f), /* @@ -788,13 +803,16 @@ static struct ab8500_reg_init ab8500_reg_init[] = { REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f), /* * 0x07, Vaux3Sel + * 0x30, Vrf1Sel */ - REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07), + REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x37), /* * 0x01, VextSupply12LP */ REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01), /* + * 0x01, VpllDisch + * 0x02, Vrf1Disch * 0x04, Vaux1Disch * 0x08, Vaux2Disch * 0x10, Vaux3Disch @@ -802,13 +820,15 @@ static struct ab8500_reg_init ab8500_reg_init[] = { * 0x40, VTVoutDisch * 0x80, VaudioDisch */ - REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc), + REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xff), /* + * 0x01, VsimDisch * 0x02, VanaDisch * 0x04, VdmicPullDownEna + * 0x08, VpllPullDownEna * 0x10, VdmicDisch */ - REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16), + REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x1f), }; static int ab8500_regulator_init_registers(struct platform_device *pdev, diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index a1d245f13d9c..dd7944f735d8 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -61,6 +61,7 @@ struct ab8500_regulator_reg_init { /* AB8500 registers */ enum ab8500_regulator_reg { + AB8500_REGUREQUESTCTRL1, AB8500_REGUREQUESTCTRL2, AB8500_REGUREQUESTCTRL3, AB8500_REGUREQUESTCTRL4, @@ -77,26 +78,28 @@ enum ab8500_regulator_reg { AB8500_REGUMISC1, AB8500_VAUDIOSUPPLY, AB8500_REGUCTRL1VAMIC, + AB8500_VSMPS1REGU, + AB8500_VSMPS2REGU, + AB8500_VSMPS3REGU, /* NOTE! PRCMU register */ AB8500_VPLLVANAREGU, AB8500_VREFDDR, AB8500_EXTSUPPLYREGU, AB8500_VAUX12REGU, AB8500_VRF1VAUX3REGU, + AB8500_VSMPS1SEL1, + AB8500_VSMPS1SEL2, + AB8500_VSMPS1SEL3, + AB8500_VSMPS2SEL1, + AB8500_VSMPS2SEL2, + AB8500_VSMPS2SEL3, + AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */ + AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */ AB8500_VAUX1SEL, AB8500_VAUX2SEL, AB8500_VRF1VAUX3SEL, AB8500_REGUCTRL2SPARE, AB8500_REGUCTRLDISCH, AB8500_REGUCTRLDISCH2, - AB8500_ARMREGU2, /* NOTE! PRCMU register */ - AB8500_VBBSEL1, /* NOTE! PRCMU register */ - AB8500_VBBSEL2, /* NOTE! PRCMU register */ - AB8500_VSMPS1REGU, - AB8500_VSMPS2REGU, - AB8500_VSMPS3REGU, /* NOTE! PRCMU register */ - AB8500_VSMPS1SEL1, - AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */ - AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */ AB8500_NUM_REGULATOR_REGISTERS, }; -- cgit From 732805a563617aafc7405409c03182afafb3943b Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Thu, 21 Mar 2013 15:59:03 +0000 Subject: regulator: ab8500: Separate regulator and MFD platform data The ab8500 MFD should not have knowledge about regulator- specific platform data like number of regulators and regulator registers. As the regulator platform data is about to grow with external regulators, this information is moved to a new structure provided by the regulator driver. Signed-off-by: Bengt Jonsson Signed-off-by: Lee Jones Reviewed-by: Yvan FILLION Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 12 +++++++++--- arch/arm/mach-ux500/board-mop500-regulators.h | 4 +--- drivers/regulator/ab8500.c | 21 +++++++++++++++------ include/linux/regulator/ab8500.h | 7 +++++++ 4 files changed, 32 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index a8141e3e8ca1..0fd84d42e1ec 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -122,8 +122,7 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { }; /* ab8500 regulator register initialization */ -struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest * VpllRequestCtrl = HP/LP depending on VxRequest @@ -314,7 +313,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { }; /* AB8500 regulators */ -struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { .constraints = { @@ -423,3 +422,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .consumer_supplies = ab8500_vana_consumers, }, }; + +struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), +}; diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 78a0642a2206..9ca4869a6f23 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,9 +14,7 @@ #include #include -extern struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; -extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index c7784c4bff4f..f7d1f538c200 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -939,8 +939,9 @@ ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np) static int ab8500_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_platform_data *pdata; struct device_node *np = pdev->dev.of_node; + struct ab8500_platform_data *ppdata; + struct ab8500_regulator_platform_data *pdata; int i, err; if (np) { @@ -961,7 +962,14 @@ static int ab8500_regulator_probe(struct platform_device *pdev) dev_err(&pdev->dev, "null mfd parent\n"); return -EINVAL; } - pdata = dev_get_platdata(ab8500->dev); + + ppdata = dev_get_platdata(ab8500->dev); + if (!ppdata) { + dev_err(&pdev->dev, "null parent pdata\n"); + return -EINVAL; + } + + pdata = ppdata->regulator; if (!pdata) { dev_err(&pdev->dev, "null pdata\n"); return -EINVAL; @@ -974,12 +982,12 @@ static int ab8500_regulator_probe(struct platform_device *pdev) } /* initialize registers */ - for (i = 0; i < pdata->num_regulator_reg_init; i++) { + for (i = 0; i < pdata->num_reg_init; i++) { int id, mask, value; - id = pdata->regulator_reg_init[i].id; - mask = pdata->regulator_reg_init[i].mask; - value = pdata->regulator_reg_init[i].value; + id = pdata->reg_init[i].id; + mask = pdata->reg_init[i].mask; + value = pdata->reg_init[i].value; /* check for configuration errors */ BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS); @@ -1045,5 +1053,6 @@ module_exit(ab8500_regulator_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sundar Iyer "); +MODULE_AUTHOR("Bengt Jonsson "); MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC"); MODULE_ALIAS("platform:ab8500-regulator"); diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index dd7944f735d8..3a8e02687f7b 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -152,4 +152,11 @@ enum ab9540_regulator_reg { AB9540_NUM_REGULATOR_REGISTERS, }; +struct ab8500_regulator_platform_data { + int num_reg_init; + struct ab8500_regulator_reg_init *reg_init; + int num_regulator; + struct regulator_init_data *regulator; +}; + #endif -- cgit From 27f26de1850e36254b4e5e4162d1e047e46914fc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:05 +0000 Subject: ARM: ux500: Update displays in vaux1 consumer list Add 3 more specific consumers pertaining to the displays found on the u8500 and ST User Interface Boards (UIBs). Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 0fd84d42e1ec..c4d0d0cd69a2 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -53,8 +53,12 @@ struct regulator_init_data tps61052_regulator = { }; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* External displays, connector on board 2v5 power supply */ - REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), /* SFH7741 proximity sensor */ REGULATOR_SUPPLY("vcc", "gpio-keys.0"), /* BH1780GLS ambient light sensor */ -- cgit From efb34d2777427b90e5062c1f8e9dd5b2ce459493 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:10 +0000 Subject: ARM: ux500: Add supply for the L3G4200D Gyroscope This patch lists the L3G4200D Gyroscope as a consumer of the AB8500 VAUX1 regulator. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index c4d0d0cd69a2..e75562d48c04 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -72,6 +72,8 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("avdd", "3-005d"), /* Synaptics RMI4 Touchscreen device */ REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { -- cgit From 2d0266aba7be888d88df735abaa6a6c0379de93f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:11 +0000 Subject: ARM: ux500: Add supply for the Ambient light sensor device This patch lists the Ambient light sensor device as a consumer of the AB8500 VAUX1 regulator. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index e75562d48c04..ba8808096c02 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -74,6 +74,8 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "3-004b"), /* L3G4200D Gyroscope device */ REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { -- cgit From 4336c1d29ea9bb8ac11743da67377f196665ea28 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:12 +0000 Subject: ARM: ux500: Add supply for the Pressure sensor This patch lists the Pressure sensor as a consumer of the AB8500 VAUX1 regulator. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index ba8808096c02..00a713372775 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -76,6 +76,8 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-0068"), /* Ambient light sensor device */ REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { -- cgit From 5379f026613b7ecc7e46f15b2aad377177bb0e81 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:13 +0000 Subject: ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen This patch lists the Cypress TrueTouch Touchscreen as a consumer of the AB8500 VAUX1 regulator. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 00a713372775..6abf0a85b864 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -78,6 +78,8 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "3-0029"), /* Pressure sensor device */ REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { -- cgit From fa679523b68e1a2f9d99d5e714e022a4327e13a8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:14 +0000 Subject: ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1 The MMIO camera uses the VAUX1 as it's voltage supply. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 6abf0a85b864..c962d1d726bb 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -80,6 +80,8 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-005c"), /* Cypress TrueTouch Touchscreen device */ REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { -- cgit From 43a5911b3dcec81add87d833cd8c7ddaaa205a47 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:15 +0000 Subject: regulator: ab8500: Clean out SoC registers Clean out initialisation that is handled by SoC. Regulator settings for Vpll (partly), Vsmps1, Vsmps2, Vsmps3 (partly), Vrf1, Varm, Vape, Vbb, Vmod are cleaned out. They should not be touched by the kernel. We also update many of the initialisation values to be more in-line with the current development efforts of ST-Ericsson internal engineers. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 28 ++------ drivers/regulator/ab8500.c | 98 +++++++-------------------- include/linux/regulator/ab8500.h | 12 ---- 3 files changed, 28 insertions(+), 110 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index c962d1d726bb..3d899c51bbac 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -139,10 +139,9 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest - * VpllRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xfc, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest @@ -156,16 +155,12 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { */ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* - * Vsmps1SysClkReq1HPValid = enabled - * Vsmps2SysClkReq1HPValid = enabled - * Vsmps3SysClkReq1HPValid = enabled * VanaSysClkReq1HPValid = disabled - * VpllSysClkReq1HPValid = enabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xff, 0x17), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled @@ -252,17 +247,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { */ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* - * Vsmps1Regu = HW control - * Vsmps1SelCtrl = Vsmps1 voltage defined by Vsmsp1Sel2 - */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x0f, 0x06), - /* - * Vsmps2Regu = HW control - * Vsmps2SelCtrl = Vsmps2 voltage defined by Vsmsp2Sel2 - */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x0f, 0x06), - /* - * VPll = Hw controlled + * VPll = Hw controlled (NOTE! PRCMU bits) * VanaRegu = force off */ INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), @@ -285,14 +270,9 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { */ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* - * Vrf1Regu = HW control * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x0f, 0x08), - /* - * Vsmps1 = 1.15V - */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x3f, 0x24), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* * Vaux1Sel = 2.5 V */ diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index f1453a66a0fd..919d9fa9605e 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -613,19 +613,10 @@ struct ab8500_reg_init { static struct ab8500_reg_init ab8500_reg_init[] = { /* - * 0x03, VarmRequestCtrl - * 0x0c, VapeRequestCtrl - * 0x30, Vsmps1RequestCtrl - * 0xc0, Vsmps2RequestCtrl - */ - REG_INIT(AB8500_REGUREQUESTCTRL1, 0x03, 0x03, 0xff), - /* - * 0x03, Vsmps3RequestCtrl - * 0x0c, VpllRequestCtrl * 0x30, VanaRequestCtrl * 0xc0, VextSupply1RequestCtrl */ - REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xff), + REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xf0), /* * 0x03, VextSupply2RequestCtrl * 0x0c, VextSupply3RequestCtrl @@ -639,91 +630,74 @@ static struct ab8500_reg_init ab8500_reg_init[] = { */ REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07), /* - * 0x01, Vsmps1SysClkReq1HPValid - * 0x02, Vsmps2SysClkReq1HPValid - * 0x04, Vsmps3SysClkReq1HPValid * 0x08, VanaSysClkReq1HPValid - * 0x10, VpllSysClkReq1HPValid * 0x20, Vaux1SysClkReq1HPValid * 0x40, Vaux2SysClkReq1HPValid * 0x80, Vaux3SysClkReq1HPValid */ - REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff), + REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8), /* - * 0x01, VapeSysClkReq1HPValid - * 0x02, VarmSysClkReq1HPValid - * 0x04, VbbSysClkReq1HPValid - * 0x08, VmodSysClkReq1HPValid * 0x10, VextSupply1SysClkReq1HPValid * 0x20, VextSupply2SysClkReq1HPValid * 0x40, VextSupply3SysClkReq1HPValid */ - REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f), + REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70), /* - * 0x01, Vsmps1HwHPReq1Valid - * 0x02, Vsmps2HwHPReq1Valid - * 0x04, Vsmps3HwHPReq1Valid * 0x08, VanaHwHPReq1Valid - * 0x10, VpllHwHPReq1Valid * 0x20, Vaux1HwHPReq1Valid * 0x40, Vaux2HwHPReq1Valid * 0x80, Vaux3HwHPReq1Valid */ - REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff), + REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8), /* * 0x01, VextSupply1HwHPReq1Valid * 0x02, VextSupply2HwHPReq1Valid * 0x04, VextSupply3HwHPReq1Valid - * 0x08, VmodHwHPReq1Valid */ - REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f), + REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07), /* - * 0x01, Vsmps1HwHPReq2Valid - * 0x02, Vsmps2HwHPReq2Valid - * 0x03, Vsmps3HwHPReq2Valid * 0x08, VanaHwHPReq2Valid - * 0x10, VpllHwHPReq2Valid * 0x20, Vaux1HwHPReq2Valid * 0x40, Vaux2HwHPReq2Valid * 0x80, Vaux3HwHPReq2Valid */ - REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff), + REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8), /* * 0x01, VextSupply1HwHPReq2Valid * 0x02, VextSupply2HwHPReq2Valid * 0x04, VextSupply3HwHPReq2Valid - * 0x08, VmodHwHPReq2Valid */ - REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f), + REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07), /* - * 0x01, VapeSwHPReqValid - * 0x02, VarmSwHPReqValid - * 0x04, Vsmps1SwHPReqValid - * 0x08, Vsmps2SwHPReqValid - * 0x10, Vsmps3SwHPReqValid * 0x20, VanaSwHPReqValid - * 0x40, VpllSwHPReqValid * 0x80, Vaux1SwHPReqValid */ - REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff), + REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0), /* * 0x01, Vaux2SwHPReqValid * 0x02, Vaux3SwHPReqValid * 0x04, VextSupply1SwHPReqValid * 0x08, VextSupply2SwHPReqValid * 0x10, VextSupply3SwHPReqValid - * 0x20, VmodSwHPReqValid */ - REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f), + REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f), /* * 0x02, SysClkReq2Valid1 - * ... + * 0x04, SysClkReq3Valid1 + * 0x08, SysClkReq4Valid1 + * 0x10, SysClkReq5Valid1 + * 0x20, SysClkReq6Valid1 + * 0x40, SysClkReq7Valid1 * 0x80, SysClkReq8Valid1 */ REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe), /* * 0x02, SysClkReq2Valid2 - * ... + * 0x04, SysClkReq3Valid2 + * 0x08, SysClkReq4Valid2 + * 0x10, SysClkReq5Valid2 + * 0x20, SysClkReq6Valid2 + * 0x40, SysClkReq7Valid2 * 0x80, SysClkReq8Valid2 */ REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe), @@ -748,21 +722,7 @@ static struct ab8500_reg_init ab8500_reg_init[] = { */ REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03), /* - * 0x03, Vsmps1Regu - * 0x0c, Vsmps1SelCtrl - * 0x10, Vsmps1AutoMode - * 0x20, Vsmps1PWMMode - */ - REG_INIT(AB8500_VSMPS1REGU, 0x04, 0x03, 0x3f), - /* - * 0x03, Vsmps2Regu - * 0x0c, Vsmps2SelCtrl - * 0x10, Vsmps2AutoMode - * 0x20, Vsmps2PWMMode - */ - REG_INIT(AB8500_VSMPS2REGU, 0x04, 0x04, 0x3f), - /* - * 0x03, VpllRegu + * 0x03, VpllRegu (NOTE! PRCMU register bits) * 0x0c, VanaRegu */ REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f), @@ -785,14 +745,9 @@ static struct ab8500_reg_init ab8500_reg_init[] = { */ REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f), /* - * 0x0c, Vrf1Regu * 0x03, Vaux3Regu */ - REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f), - /* - * 0x3f, Vsmps1Sel1 - */ - REG_INIT(AB8500_VSMPS1SEL1, 0x04, 0x13, 0x3f), + REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x03), /* * 0x0f, Vaux1Sel */ @@ -803,16 +758,13 @@ static struct ab8500_reg_init ab8500_reg_init[] = { REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f), /* * 0x07, Vaux3Sel - * 0x30, Vrf1Sel */ - REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x37), + REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07), /* * 0x01, VextSupply12LP */ REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01), /* - * 0x01, VpllDisch - * 0x02, Vrf1Disch * 0x04, Vaux1Disch * 0x08, Vaux2Disch * 0x10, Vaux3Disch @@ -820,15 +772,13 @@ static struct ab8500_reg_init ab8500_reg_init[] = { * 0x40, VTVoutDisch * 0x80, VaudioDisch */ - REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xff), + REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc), /* - * 0x01, VsimDisch * 0x02, VanaDisch * 0x04, VdmicPullDownEna - * 0x08, VpllPullDownEna * 0x10, VdmicDisch */ - REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x1f), + REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16), }; static int ab8500_regulator_init_registers(struct platform_device *pdev, diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 3a8e02687f7b..26792ff360be 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -61,7 +61,6 @@ struct ab8500_regulator_reg_init { /* AB8500 registers */ enum ab8500_regulator_reg { - AB8500_REGUREQUESTCTRL1, AB8500_REGUREQUESTCTRL2, AB8500_REGUREQUESTCTRL3, AB8500_REGUREQUESTCTRL4, @@ -78,22 +77,11 @@ enum ab8500_regulator_reg { AB8500_REGUMISC1, AB8500_VAUDIOSUPPLY, AB8500_REGUCTRL1VAMIC, - AB8500_VSMPS1REGU, - AB8500_VSMPS2REGU, - AB8500_VSMPS3REGU, /* NOTE! PRCMU register */ AB8500_VPLLVANAREGU, AB8500_VREFDDR, AB8500_EXTSUPPLYREGU, AB8500_VAUX12REGU, AB8500_VRF1VAUX3REGU, - AB8500_VSMPS1SEL1, - AB8500_VSMPS1SEL2, - AB8500_VSMPS1SEL3, - AB8500_VSMPS2SEL1, - AB8500_VSMPS2SEL2, - AB8500_VSMPS2SEL3, - AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */ - AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */ AB8500_VAUX1SEL, AB8500_VAUX2SEL, AB8500_VRF1VAUX3SEL, -- cgit From cb6795acdf5b46047d30e60f299506fc97cb3468 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 21 Mar 2013 15:59:21 +0000 Subject: ARM: ux500: regulator: Add accelerometer and fix magnetometer supply device ID This patch adds the LSM303DLHC Accelerometer to the list of VAUX1 consumers, as well as amending the already added LSM303DLHC Magnetometer's device ID. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 3d899c51bbac..035b92f1d6d8 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -65,8 +65,10 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ REGULATOR_SUPPLY("vdd", "3-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "3-001e"), + REGULATOR_SUPPLY("vdd", "2-001e"), /* Rohm BU21013 Touchscreen devices */ REGULATOR_SUPPLY("avdd", "3-005c"), REGULATOR_SUPPLY("avdd", "3-005d"), -- cgit From a387ac5f7b1b37f26f4860344e68e1a1d86aae94 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Mar 2013 16:11:02 +0000 Subject: ARM: ux500: Add regulator platform data for AB8500 external regulators Pass constraint information for recently supported external AB8500 controlled regulators. Also change the start-up initialisation settings for each of the 3 supported external supplies to low-power, off and high-power for supply 1, 2 and 3 respectively. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 59 +++++++++++++++++++++++++-- 1 file changed, 55 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 035b92f1d6d8..089cf2ae5927 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -259,13 +259,13 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { */ INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* - * VextSupply1Regu = HW control - * VextSupply2Regu = HW control - * VextSupply3Regu = HW control + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x1a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), /* * Vaux1Regu = force HP * Vaux2Regu = force off @@ -419,9 +419,60 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, }; +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ +static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { + .hwreq = true, +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .reg_init = ab8500_reg_init, .num_reg_init = ARRAY_SIZE(ab8500_reg_init), .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; -- cgit From a1d494806698ae37c14b0c7fe9e6165e3b0c146c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Mar 2013 16:11:03 +0000 Subject: ARM: ux500: Provide a mechanism to over-ride regulator init values If particular platforms require non-standard initialisation values, they can use this function to adapt them as required. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 089cf2ae5927..22dfaf3d979a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -476,3 +476,21 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .ext_regulator = ab8500_ext_regulators, .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; + +static void ab8500_modify_reg_init(int id, u8 mask, u8 value) +{ + int i; + + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } + } + + BUG_ON(1); +} -- cgit From 422d765d2cb9a22ded86d8b63a1701e296436b81 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Mar 2013 16:11:04 +0000 Subject: ARM: ux500: Turn off external regulator #1 when early HREFs suspend When older variants of the HREF (earlier than v22) development platform enter suspend mode, power down EXT_SUPPLY1. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 17 +++++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 2 ++ 2 files changed, 19 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 22dfaf3d979a..2a2751e4aa8a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -11,6 +11,7 @@ #include #include #include +#include /* to identify older boards for fixes */ #include "board-mop500-regulators.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { @@ -494,3 +495,19 @@ static void ab8500_modify_reg_init(int id, u8 mask, u8 value) BUG_ON(1); } + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Handle VextSupply1 on older boards than HREFP_V22_V1x + * (turn off in suspend) + */ + if (cpu_is_u8500v20() || cpu_is_u8500v21()) { + /* disable VextSupply1 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY1]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 9ca4869a6f23..3d4c412d0b7a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,4 +18,6 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +void mop500_regulator_init(void); + #endif -- cgit From e0c44686c3e22b2b7f0441a31db411b1c70b47c3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Mar 2013 16:11:05 +0000 Subject: ARM: ux500: Setup external regulator supply #2 for HREF v20 boards v20 HREFs require non-standard configuration of EXT_SUPPLY2 to function correctly (specific information is commented). Here we make use of the recently added mechanism to adapt initialisation values for such use-cases. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a2751e4aa8a..c1173a161a04 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -510,4 +510,32 @@ void mop500_regulator_init(void) regulator->constraints.state_mem.disabled = 1; regulator->constraints.state_standby.disabled = 1; } + + /* + * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for + * all HREFP_V20 boards) + */ + if (cpu_is_u8500v20()) { + /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ + ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); + + /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ + ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, + 0x20, 0x20); + + /* VextSupply2 = force HP at initialization */ + ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); + + /* enable VextSupply2 during platform active */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.always_on = 1; + + /* disable VextSupply2 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + + /* enable VextSupply2 HW control (used in suspend) */ + regulator->driver_data = (void *)&ab8500_ext_supply2; + } } -- cgit From 547f384f33dbd6171607f925ab246e25e315961e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Mar 2013 16:11:14 +0000 Subject: regulator: ab8500: add support for ab8505 To obtain full AB8505 regulator support, the AB8500 regulator driver first needs to know its register layout and their initialisation values for each. That information is provided via a couple of large data structures which we provide here. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 511 ++++++++++++++++++++- arch/arm/mach-ux500/board-mop500-regulators.h | 1 + drivers/regulator/ab8500.c | 617 ++++++++++++++++++++++++++ include/linux/regulator/ab8500.h | 75 +++- 4 files changed, 1195 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index c1173a161a04..816151903d46 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer * Bengt Jonsson + * Daniel Willerud * * MOP500 board specific initialization for regulators */ @@ -99,6 +100,27 @@ static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi0"), }; +static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { + /* AB8500 audio codec device */ + REGULATOR_SUPPLY("v-aux8", NULL), +}; + +static struct regulator_consumer_supply ab8505_vadc_consumers[] = { + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), +}; + static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), @@ -133,6 +155,11 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), }; +static struct regulator_consumer_supply ab8505_usb_consumers[] = { + /* HS USB OTG physical interface */ + REGULATOR_SUPPLY("v-ape", NULL), +}; + static struct regulator_consumer_supply ab8500_vana_consumers[] = { /* External displays, connector on board, 1v8 power supply */ REGULATOR_SUPPLY("vsmps2", "mcde.0"), @@ -469,6 +496,450 @@ static struct regulator_init_data ab8500_ext_regulators[] = { }, }; +/* ab8505 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8505_reg_init[] = { + /* + * VarmRequestCtrl + * VsmpsCRequestCtrl + * VsmpsARequestCtrl + * VsmpsBRequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), + /* + * VsafeRequestCtrl + * VpllRequestCtrl + * VanaRequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), + /* + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VsmpsASysClkReq1HPValid + * VsmpsBSysClkReq1HPValid + * VsafeSysClkReq1HPValid + * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VsmpsCSysClkReq1HPValid + * VarmSysClkReq1HPValid + * VbbSysClkReq1HPValid + * VsmpsMSysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq1Valid + * VsmpsBHwHPReq1Valid + * VsafeHwHPReq1Valid + * VanaHwHPReq1Valid = disabled + * VpllHwHPReq1Valid + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq1Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq2Valid + * VsmpsBHwHPReq2Valid + * VsafeHwHPReq2Valid + * VanaHwHPReq2Valid = disabled + * VpllHwHPReq2Valid + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq2Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), + /** + * VsmpsCSwHPReqValid + * VarmSwHPReqValid + * VsmpsASwHPReqValid + * VsmpsBSwHPReqValid + * VsafeSwHPReqValid + * VanaSwHPReqValid + * VanaSwHPReqValid = disabled + * VpllSwHPReqValid + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VsmpsMSwHPReqValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), + /* + * Vaux4SwHPReqValid + * Vaux4HwHPReq2Valid + * Vaux4HwHPReq1Valid + * Vaux4SysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), + /* + * VadcEna = disabled + * VintCore12Ena = disabled + * VintCore12Sel = 1.25 V + * VintCore12LP = inactive (HP) + * VadcLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * Vaux8Ena = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VsmpsARegu + * VsmpsASelCtrl + * VsmpsAAutoMode + * VsmpsAPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), + /* + * VsmpsBRegu + * VsmpsBSelCtrl + * VsmpsBAutoMode + * VsmpsBPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), + /* + * VsafeRegu + * VsafeSelCtrl + * VsafeAutoMode + * VsafePWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), + /* + * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), + /* + * VsmpsASel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), + /* + * VsmpsASel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), + /* + * VsmpsASel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), + /* + * VsmpsBSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), + /* + * VsmpsBSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), + /* + * VsmpsBSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), + /* + * VsafeSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), + /* + * VsafeSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), + /* + * VsafeSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), + /* + * Vaux4RequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), + /* + * Vaux4Regu + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), + /* + * Vaux4Sel + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled + * Vaux8Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), + /* + * Vaux4Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), + /* + * Vaux5Sel + * Vaux5LP + * Vaux5Ena + * Vaux5Disch + * Vaux5DisSfst + * Vaux5DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), + /* + * Vaux6Sel + * Vaux6LP + * Vaux6Ena + * Vaux6DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), +}; + +struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8505_LDO_AUX1] = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8505_LDO_AUX2] = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8505_LDO_AUX3] = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for VAUX4, supplies to NFC and standalone secure element */ + [AB8505_LDO_AUX4] = { + .constraints = { + .name = "V-NFC-SE", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), + .consumer_supplies = ab8505_vaux4_consumers, + }, + /* supply for VAUX5, supplies to TBD */ + [AB8505_LDO_AUX5] = { + .constraints = { + .name = "V-AUX5", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), + .consumer_supplies = ab8505_vaux5_consumers, + }, + /* supply for VAUX6, supplies to TBD */ + [AB8505_LDO_AUX6] = { + .constraints = { + .name = "V-AUX6", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), + .consumer_supplies = ab8505_vaux6_consumers, + }, + /* supply for gpadc, ADC LDO */ + [AB8505_LDO_ADC] = { + .constraints = { + .name = "V-ADC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), + .consumer_supplies = ab8505_vadc_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8505_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8505_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8505_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-aux8, VAUX8 LDO */ + [AB8505_LDO_AUX8] = { + .constraints = { + .name = "V-AUX8", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), + .consumer_supplies = ab8505_vaux8_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8505_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for LDO USB */ + [AB8505_LDO_USB] = { + .constraints = { + .name = "V-USB", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), + .consumer_supplies = ab8505_usb_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8505_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .reg_init = ab8500_reg_init, .num_reg_init = ARRAY_SIZE(ab8500_reg_init), @@ -478,18 +949,39 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; +/* Use the AB8500 init settings for AB8505 as they are the same right now */ +struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { + .reg_init = ab8505_reg_init, + .num_reg_init = ARRAY_SIZE(ab8505_reg_init), + .regulator = ab8505_regulators, + .num_regulator = ARRAY_SIZE(ab8505_regulators), +}; + static void ab8500_modify_reg_init(int id, u8 mask, u8 value) { int i; - for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { - if (ab8500_reg_init[i].id == id) { - u8 initval = ab8500_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8500_reg_init[i].value = initval; + if (cpu_is_u8520()) { + for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { + if (ab8505_reg_init[i].id == id) { + u8 initval = ab8505_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8505_reg_init[i].value = initval; - BUG_ON(mask & ~ab8500_reg_init[i].mask); - return; + BUG_ON(mask & ~ab8505_reg_init[i].mask); + return; + } + } + } else { + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } } } @@ -511,6 +1003,11 @@ void mop500_regulator_init(void) regulator->constraints.state_standby.disabled = 1; } + if (cpu_is_u8520()) { + /* Vaux2 initialized to be on */ + ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); + } + /* * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for * all HREFP_V20 boards) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 3d4c412d0b7a..9bece38fe933 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -15,6 +15,7 @@ #include extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; +extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 9de3a211b0b4..1ab0f8a7c862 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -5,11 +5,15 @@ * * Authors: Sundar Iyer for ST-Ericsson * Bengt Jonsson for ST-Ericsson + * Daniel Willerud for ST-Ericsson * * AB8500 peripheral regulators * * AB8500 supports the following regulators: * VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA + * + * AB8505 supports the following regulators: + * VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA */ #include #include @@ -92,6 +96,17 @@ static const unsigned int ldo_vaux3_voltages[] = { 2910000, }; +static const int ldo_vaux56_voltages[] = { + 1800000, + 1050000, + 1100000, + 1200000, + 1500000, + 2200000, + 2500000, + 2790000, +}; + static const unsigned int ldo_vintcore_voltages[] = { 1200000, 1225000, @@ -589,6 +604,313 @@ static struct ab8500_regulator_info }, }; +/* AB8505 regulator information */ +static struct ab8500_regulator_info + ab8505_regulator_info[AB8505_NUM_REGULATORS] = { + /* + * Variable Voltage Regulators + * name, min mV, max mV, + * update bank, reg, mask, enable val + * volt bank, reg, mask, table, table length + */ + [AB8505_LDO_AUX1] = { + .desc = { + .name = "LDO-AUX1", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_AUX1, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), + }, + .min_uV = 1100000, + .max_uV = 3300000, + .load_lp_uA = 5000, + .update_bank = 0x04, + .update_reg = 0x09, + .update_mask = 0x03, + .update_val = 0x01, + .update_val_idle = 0x03, + .update_val_normal = 0x01, + .voltage_bank = 0x04, + .voltage_reg = 0x1f, + .voltage_mask = 0x0f, + .voltages = ldo_vauxn_voltages, + .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages), + }, + [AB8505_LDO_AUX2] = { + .desc = { + .name = "LDO-AUX2", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_AUX2, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), + }, + .min_uV = 1100000, + .max_uV = 3300000, + .load_lp_uA = 5000, + .update_bank = 0x04, + .update_reg = 0x09, + .update_mask = 0x0c, + .update_val = 0x04, + .update_val_idle = 0x0c, + .update_val_normal = 0x04, + .voltage_bank = 0x04, + .voltage_reg = 0x20, + .voltage_mask = 0x0f, + .voltages = ldo_vauxn_voltages, + .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages), + }, + [AB8505_LDO_AUX3] = { + .desc = { + .name = "LDO-AUX3", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_AUX3, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages), + }, + .min_uV = 1100000, + .max_uV = 3300000, + .load_lp_uA = 5000, + .update_bank = 0x04, + .update_reg = 0x0a, + .update_mask = 0x03, + .update_val = 0x01, + .update_val_idle = 0x03, + .update_val_normal = 0x01, + .voltage_bank = 0x04, + .voltage_reg = 0x21, + .voltage_mask = 0x07, + .voltages = ldo_vaux3_voltages, + .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages), + }, + [AB8505_LDO_AUX4] = { + .desc = { + .name = "LDO-AUX4", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB9540_LDO_AUX4, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), + }, + .min_uV = 1100000, + .max_uV = 3300000, + .load_lp_uA = 5000, + /* values for Vaux4Regu register */ + .update_bank = 0x04, + .update_reg = 0x2e, + .update_mask = 0x03, + .update_val = 0x01, + .update_val_idle = 0x03, + .update_val_normal = 0x01, + /* values for Vaux4SEL register */ + .voltage_bank = 0x04, + .voltage_reg = 0x2f, + .voltage_mask = 0x0f, + .voltages = ldo_vauxn_voltages, + .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages), + }, + [AB8505_LDO_AUX5] = { + .desc = { + .name = "LDO-AUX5", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8505_LDO_AUX5, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages), + }, + .min_uV = 1050000, + .max_uV = 2790000, + .load_lp_uA = 2000, + /* values for CtrlVaux5 register */ + .update_bank = 0x01, + .update_reg = 0x55, + .update_mask = 0x08, + .update_val = 0x00, + .update_val_idle = 0x01, + .update_val_normal = 0x00, + .voltage_bank = 0x01, + .voltage_reg = 0x55, + .voltage_mask = 0x07, + .voltages = ldo_vaux56_voltages, + .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages), + }, + [AB8505_LDO_AUX6] = { + .desc = { + .name = "LDO-AUX6", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8505_LDO_AUX6, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages), + }, + .min_uV = 1050000, + .max_uV = 2790000, + .load_lp_uA = 2000, + /* values for CtrlVaux6 register */ + .update_bank = 0x01, + .update_reg = 0x56, + .update_mask = 0x08, + .update_val = 0x00, + .update_val_idle = 0x01, + .update_val_normal = 0x00, + .voltage_bank = 0x01, + .voltage_reg = 0x56, + .voltage_mask = 0x07, + .voltages = ldo_vaux56_voltages, + .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages), + }, + [AB8505_LDO_INTCORE] = { + .desc = { + .name = "LDO-INTCORE", + .ops = &ab8500_regulator_volt_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_INTCORE, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages), + }, + .min_uV = 1100000, + .max_uV = 3300000, + .load_lp_uA = 5000, + .update_bank = 0x03, + .update_reg = 0x80, + .update_mask = 0x44, + .update_val = 0x04, + .update_val_idle = 0x44, + .update_val_normal = 0x04, + .voltage_bank = 0x03, + .voltage_reg = 0x80, + .voltage_mask = 0x38, + .voltages = ldo_vintcore_voltages, + .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages), + .voltage_shift = 3, + }, + + /* + * Fixed Voltage Regulators + * name, fixed mV, + * update bank, reg, mask, enable val + */ + [AB8505_LDO_ADC] = { + .desc = { + .name = "LDO-ADC", + .ops = &ab8500_regulator_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8505_LDO_ADC, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .delay = 10000, + .fixed_uV = 2000000, + .load_lp_uA = 1000, + .update_bank = 0x03, + .update_reg = 0x80, + .update_mask = 0x82, + .update_val = 0x02, + .update_val_idle = 0x82, + .update_val_normal = 0x02, + }, + [AB8505_LDO_USB] = { + .desc = { + .name = "LDO-USB", + .ops = &ab8500_regulator_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB9540_LDO_USB, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 3300000, + .update_bank = 0x03, + .update_reg = 0x82, + .update_mask = 0x03, + .update_val = 0x01, + .update_val_idle = 0x03, + .update_val_normal = 0x01, + }, + [AB8505_LDO_AUDIO] = { + .desc = { + .name = "LDO-AUDIO", + .ops = &ab8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_AUDIO, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 2000000, + .update_bank = 0x03, + .update_reg = 0x83, + .update_mask = 0x02, + .update_val = 0x02, + }, + [AB8505_LDO_ANAMIC1] = { + .desc = { + .name = "LDO-ANAMIC1", + .ops = &ab8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_ANAMIC1, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 2050000, + .update_bank = 0x03, + .update_reg = 0x83, + .update_mask = 0x08, + .update_val = 0x08, + }, + [AB8505_LDO_ANAMIC2] = { + .desc = { + .name = "LDO-ANAMIC2", + .ops = &ab8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_ANAMIC2, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 2050000, + .update_bank = 0x03, + .update_reg = 0x83, + .update_mask = 0x10, + .update_val = 0x10, + }, + [AB8505_LDO_AUX8] = { + .desc = { + .name = "LDO-AUX8", + .ops = &ab8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8505_LDO_AUX8, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 1800000, + .update_bank = 0x03, + .update_reg = 0x83, + .update_mask = 0x04, + .update_val = 0x04, + }, + /* + * Regulators with fixed voltage and normal/idle modes + */ + [AB8505_LDO_ANA] = { + .desc = { + .name = "LDO-ANA", + .ops = &ab8500_regulator_mode_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_LDO_ANA, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .fixed_uV = 1200000, + .load_lp_uA = 1000, + .update_bank = 0x04, + .update_reg = 0x06, + .update_mask = 0x0c, + .update_val = 0x04, + .update_val_idle = 0x0c, + .update_val_normal = 0x04, + }, +}; + /* AB9540 regulator information */ static struct ab8500_regulator_info ab9540_regulator_info[AB9540_NUM_REGULATORS] = { @@ -1031,6 +1353,276 @@ static struct ab8500_reg_init ab8500_reg_init[] = { REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16), }; +/* AB8505 register init */ +static struct ab8500_reg_init ab8505_reg_init[] = { + /* + * 0x03, VarmRequestCtrl + * 0x0c, VsmpsCRequestCtrl + * 0x30, VsmpsARequestCtrl + * 0xc0, VsmpsBRequestCtrl + */ + REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff), + /* + * 0x03, VsafeRequestCtrl + * 0x0c, VpllRequestCtrl + * 0x30, VanaRequestCtrl + */ + REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f), + /* + * 0x30, Vaux1RequestCtrl + * 0xc0, Vaux2RequestCtrl + */ + REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0), + /* + * 0x03, Vaux3RequestCtrl + * 0x04, SwHPReq + */ + REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07), + /* + * 0x01, VsmpsASysClkReq1HPValid + * 0x02, VsmpsBSysClkReq1HPValid + * 0x04, VsafeSysClkReq1HPValid + * 0x08, VanaSysClkReq1HPValid + * 0x10, VpllSysClkReq1HPValid + * 0x20, Vaux1SysClkReq1HPValid + * 0x40, Vaux2SysClkReq1HPValid + * 0x80, Vaux3SysClkReq1HPValid + */ + REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff), + /* + * 0x01, VsmpsCSysClkReq1HPValid + * 0x02, VarmSysClkReq1HPValid + * 0x04, VbbSysClkReq1HPValid + * 0x08, VsmpsMSysClkReq1HPValid + */ + REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f), + /* + * 0x01, VsmpsAHwHPReq1Valid + * 0x02, VsmpsBHwHPReq1Valid + * 0x04, VsafeHwHPReq1Valid + * 0x08, VanaHwHPReq1Valid + * 0x10, VpllHwHPReq1Valid + * 0x20, Vaux1HwHPReq1Valid + * 0x40, Vaux2HwHPReq1Valid + * 0x80, Vaux3HwHPReq1Valid + */ + REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff), + /* + * 0x08, VsmpsMHwHPReq1Valid + */ + REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08), + /* + * 0x01, VsmpsAHwHPReq2Valid + * 0x02, VsmpsBHwHPReq2Valid + * 0x04, VsafeHwHPReq2Valid + * 0x08, VanaHwHPReq2Valid + * 0x10, VpllHwHPReq2Valid + * 0x20, Vaux1HwHPReq2Valid + * 0x40, Vaux2HwHPReq2Valid + * 0x80, Vaux3HwHPReq2Valid + */ + REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff), + /* + * 0x08, VsmpsMHwHPReq2Valid + */ + REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08), + /* + * 0x01, VsmpsCSwHPReqValid + * 0x02, VarmSwHPReqValid + * 0x04, VsmpsASwHPReqValid + * 0x08, VsmpsBSwHPReqValid + * 0x10, VsafeSwHPReqValid + * 0x20, VanaSwHPReqValid + * 0x40, VpllSwHPReqValid + * 0x80, Vaux1SwHPReqValid + */ + REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff), + /* + * 0x01, Vaux2SwHPReqValid + * 0x02, Vaux3SwHPReqValid + * 0x20, VsmpsMSwHPReqValid + */ + REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23), + /* + * 0x02, SysClkReq2Valid1 + * 0x04, SysClkReq3Valid1 + * 0x08, SysClkReq4Valid1 + */ + REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e), + /* + * 0x02, SysClkReq2Valid2 + * 0x04, SysClkReq3Valid2 + * 0x08, SysClkReq4Valid2 + */ + REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e), + /* + * 0x01, Vaux4SwHPReqValid + * 0x02, Vaux4HwHPReq2Valid + * 0x04, Vaux4HwHPReq1Valid + * 0x08, Vaux4SysClkReq1HPValid + */ + REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f), + /* + * 0x02, VadcEna + * 0x04, VintCore12Ena + * 0x38, VintCore12Sel + * 0x40, VintCore12LP + * 0x80, VadcLP + */ + REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe), + /* + * 0x02, VaudioEna + * 0x04, VdmicEna + * 0x08, Vamic1Ena + * 0x10, Vamic2Ena + */ + REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e), + /* + * 0x01, Vamic1_dzout + * 0x02, Vamic2_dzout + */ + REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03), + /* + * 0x03, VsmpsARegu + * 0x0c, VsmpsASelCtrl + * 0x10, VsmpsAAutoMode + * 0x20, VsmpsAPWMMode + */ + REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f), + /* + * 0x03, VsmpsBRegu + * 0x0c, VsmpsBSelCtrl + * 0x10, VsmpsBAutoMode + * 0x20, VsmpsBPWMMode + */ + REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f), + /* + * 0x03, VsafeRegu + * 0x0c, VsafeSelCtrl + * 0x10, VsafeAutoMode + * 0x20, VsafePWMMode + */ + REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f), + /* + * 0x03, VpllRegu (NOTE! PRCMU register bits) + * 0x0c, VanaRegu + */ + REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f), + /* + * 0x03, VextSupply1Regu + * 0x0c, VextSupply2Regu + * 0x30, VextSupply3Regu + * 0x40, ExtSupply2Bypass + * 0x80, ExtSupply3Bypass + */ + REG_INIT(AB8505_EXTSUPPLYREGU, 0x04, 0x08, 0xff), + /* + * 0x03, Vaux1Regu + * 0x0c, Vaux2Regu + */ + REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f), + /* + * 0x0f, Vaux3Regu + */ + REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f), + /* + * 0x3f, VsmpsASel1 + */ + REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f), + /* + * 0x3f, VsmpsASel2 + */ + REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f), + /* + * 0x3f, VsmpsASel3 + */ + REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f), + /* + * 0x3f, VsmpsBSel1 + */ + REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f), + /* + * 0x3f, VsmpsBSel2 + */ + REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f), + /* + * 0x3f, VsmpsBSel3 + */ + REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f), + /* + * 0x7f, VsafeSel1 + */ + REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f), + /* + * 0x3f, VsafeSel2 + */ + REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f), + /* + * 0x3f, VsafeSel3 + */ + REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f), + /* + * 0x0f, Vaux1Sel + */ + REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f), + /* + * 0x0f, Vaux2Sel + */ + REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f), + /* + * 0x07, Vaux3Sel + * 0x30, VRF1Sel + */ + REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37), + /* + * 0x03, Vaux4RequestCtrl + */ + REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03), + /* + * 0x03, Vaux4Regu + */ + REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03), + /* + * 0x0f, Vaux4Sel + */ + REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f), + /* + * 0x04, Vaux1Disch + * 0x08, Vaux2Disch + * 0x10, Vaux3Disch + * 0x20, Vintcore12Disch + * 0x40, VTVoutDisch + * 0x80, VaudioDisch + */ + REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc), + /* + * 0x02, VanaDisch + * 0x04, VdmicPullDownEna + * 0x10, VdmicDisch + */ + REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16), + /* + * 0x01, Vaux4Disch + */ + REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01), + /* + * 0x07, Vaux5Sel + * 0x08, Vaux5LP + * 0x10, Vaux5Ena + * 0x20, Vaux5Disch + * 0x40, Vaux5DisSfst + * 0x80, Vaux5DisPulld + */ + REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff), + /* + * 0x07, Vaux6Sel + * 0x08, Vaux6LP + * 0x10, Vaux6Ena + * 0x80, Vaux6DisPulld + */ + REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f), +}; + /* AB9540 register init */ static struct ab8500_reg_init ab9540_reg_init[] = { /* @@ -1396,6 +1988,22 @@ static struct of_regulator_match ab8500_regulator_match[] = { { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, }, }; +static struct of_regulator_match ab8505_regulator_match[] = { + { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8505_LDO_AUX1, }, + { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8505_LDO_AUX2, }, + { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8505_LDO_AUX3, }, + { .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8505_LDO_AUX4, }, + { .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8505_LDO_AUX5, }, + { .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8505_LDO_AUX6, }, + { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, }, + { .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, }, + { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, }, + { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, }, + { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, }, + { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, }, +}; + static struct of_regulator_match ab9540_regulator_match[] = { { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB9540_LDO_AUX1, }, { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB9540_LDO_AUX2, }, @@ -1450,6 +2058,11 @@ static int ab8500_regulator_probe(struct platform_device *pdev) reg_init_size = AB9540_NUM_REGULATOR_REGISTERS; match = ab9540_regulator_match; match_size = ARRAY_SIZE(ab9540_regulator_match) + } else if (is_ab8505(ab8500)) { + regulator_info = ab8505_regulator_info; + regulator_info_size = ARRAY_SIZE(ab8505_regulator_info); + reg_init = ab8505_reg_init; + reg_init_size = AB8505_NUM_REGULATOR_REGISTERS; } else { regulator_info = ab8500_regulator_info; regulator_info_size = ARRAY_SIZE(ab8500_regulator_info); @@ -1543,6 +2156,9 @@ static int ab8500_regulator_remove(struct platform_device *pdev) if (is_ab9540(ab8500)) { regulator_info = ab9540_regulator_info; regulator_info_size = ARRAY_SIZE(ab9540_regulator_info); + } else if (is_ab8505(ab8500)) { + regulator_info = ab8505_regulator_info; + regulator_info_size = ARRAY_SIZE(ab8505_regulator_info); } else { regulator_info = ab8500_regulator_info; regulator_info_size = ARRAY_SIZE(ab8500_regulator_info); @@ -1601,5 +2217,6 @@ module_exit(ab8500_regulator_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sundar Iyer "); MODULE_AUTHOR("Bengt Jonsson "); +MODULE_AUTHOR("Daniel Willerud "); MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC"); MODULE_ALIAS("platform:ab8500-regulator"); diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 592a3f3994c0..9a7cf97e5040 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer for ST-Ericsson * Bengt Jonsson for ST-Ericsson + * Daniel Willerud for ST-Ericsson */ #ifndef __LINUX_MFD_AB8500_REGULATOR_H @@ -27,7 +28,28 @@ enum ab8500_regulator_id { AB8500_NUM_REGULATORS, }; -/* AB9450 regulators */ +/* AB8505 regulators */ +enum ab8505_regulator_id { + AB8505_LDO_AUX1, + AB8505_LDO_AUX2, + AB8505_LDO_AUX3, + AB8505_LDO_AUX4, + AB8505_LDO_AUX5, + AB8505_LDO_AUX6, + AB8505_LDO_INTCORE, + AB8505_LDO_ADC, + AB8505_LDO_USB, + AB8505_LDO_AUDIO, + AB8505_LDO_ANAMIC1, + AB8505_LDO_ANAMIC2, + AB8505_LDO_AUX8, + AB8505_LDO_ANA, + AB8505_SYSCLKREQ_2, + AB8505_SYSCLKREQ_4, + AB8505_NUM_REGULATORS, +}; + +/* AB9540 regulators */ enum ab9540_regulator_id { AB9540_LDO_AUX1, AB9540_LDO_AUX2, @@ -46,7 +68,7 @@ enum ab9540_regulator_id { AB9540_NUM_REGULATORS, }; -/* AB8500 and AB9540 register initialization */ +/* AB8500, AB8505, and AB9540 register initialization */ struct ab8500_regulator_reg_init { int id; u8 mask; @@ -92,6 +114,55 @@ enum ab8500_regulator_reg { AB8500_NUM_REGULATOR_REGISTERS, }; +/* AB8505 registers */ +enum ab8505_regulator_reg { + AB8505_REGUREQUESTCTRL1, + AB8505_REGUREQUESTCTRL2, + AB8505_REGUREQUESTCTRL3, + AB8505_REGUREQUESTCTRL4, + AB8505_REGUSYSCLKREQ1HPVALID1, + AB8505_REGUSYSCLKREQ1HPVALID2, + AB8505_REGUHWHPREQ1VALID1, + AB8505_REGUHWHPREQ1VALID2, + AB8505_REGUHWHPREQ2VALID1, + AB8505_REGUHWHPREQ2VALID2, + AB8505_REGUSWHPREQVALID1, + AB8505_REGUSWHPREQVALID2, + AB8505_REGUSYSCLKREQVALID1, + AB8505_REGUSYSCLKREQVALID2, + AB8505_REGUVAUX4REQVALID, + AB8505_REGUMISC1, + AB8505_VAUDIOSUPPLY, + AB8505_REGUCTRL1VAMIC, + AB8505_VSMPSAREGU, + AB8505_VSMPSBREGU, + AB8505_VSAFEREGU, /* NOTE! PRCMU register */ + AB8505_VPLLVANAREGU, + AB8505_EXTSUPPLYREGU, + AB8505_VAUX12REGU, + AB8505_VRF1VAUX3REGU, + AB8505_VSMPSASEL1, + AB8505_VSMPSASEL2, + AB8505_VSMPSASEL3, + AB8505_VSMPSBSEL1, + AB8505_VSMPSBSEL2, + AB8505_VSMPSBSEL3, + AB8505_VSAFESEL1, /* NOTE! PRCMU register */ + AB8505_VSAFESEL2, /* NOTE! PRCMU register */ + AB8505_VSAFESEL3, /* NOTE! PRCMU register */ + AB8505_VAUX1SEL, + AB8505_VAUX2SEL, + AB8505_VRF1VAUX3SEL, + AB8505_VAUX4REQCTRL, + AB8505_VAUX4REGU, + AB8505_VAUX4SEL, + AB8505_REGUCTRLDISCH, + AB8505_REGUCTRLDISCH2, + AB8505_REGUCTRLDISCH3, + AB8505_CTRLVAUX5, + AB8505_CTRLVAUX6, + AB8505_NUM_REGULATOR_REGISTERS, +}; /* AB9540 registers */ enum ab9540_regulator_reg { -- cgit From 0fbc800726aaece4c549358e56ee774dcc089960 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 2 Apr 2013 13:24:04 +0100 Subject: ARM: ux500: Use de-globalised version of id.h Following commit: "7a4f260 ARM: ux500: de-globalize ", the use of 'mach/id.h' is no longer valid. This patch continues the work of the aforementioned commit on patches applied around the same time, containing the merge-conflict. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 816151903d46..62b4aa4cbfb3 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -12,8 +12,8 @@ #include #include #include -#include /* to identify older boards for fixes */ #include "board-mop500-regulators.h" +#include "id.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -- cgit From 3fe52289105823867226355e8e957119af50e3a1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 2 Apr 2013 13:24:12 +0100 Subject: regulator: ab8500: Add mode operation for v-amic v-amic1 and v-amic2 regulators have dedicated mode registers and share the same mode bit. This patch adds special handling for those regulators. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 10 +- drivers/regulator/ab8500.c | 193 +++++++++++++++++++++----- 2 files changed, 169 insertions(+), 34 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 62b4aa4cbfb3..832966311c29 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -877,7 +877,10 @@ struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { [AB8505_LDO_ANAMIC1] = { .constraints = { .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), .consumer_supplies = ab8500_vamic1_consumers, @@ -886,7 +889,10 @@ struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { [AB8505_LDO_ANAMIC2] = { .constraints = { .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), .consumer_supplies = ab8500_vamic2_consumers, diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 6dae5dfb9fde..ac89439a4f9a 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -29,11 +29,23 @@ #include #include +/** + * struct ab8500_shared_mode - is used when mode is shared between + * two regulators. + * @shared_regulator: pointer to the other sharing regulator + * @lp_mode_req: low power mode requested by this regulator + */ +struct ab8500_shared_mode { + struct ab8500_regulator_info *shared_regulator; + bool lp_mode_req; +}; + /** * struct ab8500_regulator_info - ab8500 regulator information * @dev: device pointer * @desc: regulator description * @regulator_dev: regulator device + * @shared_mode: used when mode is shared between two regulators * @is_enabled: status of regulator (on/off) * @load_lp_uA: maximum load in idle (low power) mode * @update_bank: bank to control on/off @@ -42,6 +54,11 @@ * @update_val: bits holding the regulator current mode * @update_val_idle: bits to enable the regulator in idle (low power) mode * @update_val_normal: bits to enable the regulator in normal (high power) mode + * @mode_bank: bank with location of mode register + * @mode_reg: mode register + * @mode_mask: mask for setting mode + * @mode_val_idle: mode setting for low power + * @mode_val_normal: mode setting for normal power * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage @@ -51,6 +68,7 @@ struct ab8500_regulator_info { struct device *dev; struct regulator_desc desc; struct regulator_dev *regulator; + struct ab8500_shared_mode *shared_mode; bool is_enabled; int load_lp_uA; u8 update_bank; @@ -59,6 +77,11 @@ struct ab8500_regulator_info { u8 update_val; u8 update_val_idle; u8 update_val_normal; + u8 mode_bank; + u8 mode_reg; + u8 mode_mask; + u8 mode_val_idle; + u8 mode_val_normal; u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; @@ -189,6 +212,10 @@ static const unsigned int ldo_vaudio_voltages[] = { 2600000, /* Duplicated in Vaudio and IsoUicc Control register. */ }; +static DEFINE_MUTEX(shared_mode_mutex); +static struct ab8500_shared_mode ldo_anamic1_shared; +static struct ab8500_shared_mode ldo_anamic2_shared; + static int ab8500_regulator_enable(struct regulator_dev *rdev) { int ret; @@ -271,8 +298,12 @@ static unsigned int ab8500_regulator_get_optimum_mode( static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { - int ret; - u8 update_val; + int ret = 0; + u8 bank; + u8 reg; + u8 mask; + u8 val; + bool dmr = false; /* Dedicated mode register */ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { @@ -280,59 +311,128 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev, return -EINVAL; } - switch (mode) { - case REGULATOR_MODE_NORMAL: - update_val = info->update_val_normal; - break; - case REGULATOR_MODE_IDLE: - update_val = info->update_val_idle; - break; - default: - return -EINVAL; + if (info->shared_mode) { + /* + * Special case where mode is shared between two regulators. + */ + struct ab8500_shared_mode *sm = info->shared_mode; + mutex_lock(&shared_mode_mutex); + + if (mode == REGULATOR_MODE_IDLE) { + sm->lp_mode_req = true; /* Low power mode requested */ + if (!((sm->shared_regulator)-> + shared_mode->lp_mode_req)) { + mutex_unlock(&shared_mode_mutex); + return 0; /* Other regulator prevent LP mode */ + } + } else { + sm->lp_mode_req = false; + } } - /* ab8500 regulators share mode and enable in the same register bits. - off = 0b00 - low power mode= 0b11 - full powermode = 0b01 - (HW control mode = 0b10) - Thus we don't write to the register when regulator is disabled. - */ - if (info->is_enabled) { + if (info->mode_mask) { + /* Dedicated register for handling mode */ + + dmr = true; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = info->mode_val_normal; + break; + case REGULATOR_MODE_IDLE: + val = info->mode_val_idle; + break; + default: + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); + return -EINVAL; + } + + bank = info->mode_bank; + reg = info->mode_reg; + mask = info->mode_mask; + } else { + /* Mode register same as enable register */ + + switch (mode) { + case REGULATOR_MODE_NORMAL: + info->update_val = info->update_val_normal; + val = info->update_val_normal; + break; + case REGULATOR_MODE_IDLE: + info->update_val = info->update_val_idle; + val = info->update_val_idle; + break; + default: + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); + return -EINVAL; + } + + bank = info->update_bank; + reg = info->update_reg; + mask = info->update_mask; + } + + if (info->is_enabled || dmr) { ret = abx500_mask_and_set_register_interruptible(info->dev, - info->update_bank, info->update_reg, - info->update_mask, update_val); - if (ret < 0) { + bank, reg, mask, val); + if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set regulator mode\n"); - return ret; - } dev_vdbg(rdev_get_dev(rdev), "%s-set_mode (bank, reg, mask, value): " "0x%x, 0x%x, 0x%x, 0x%x\n", - info->desc.name, info->update_bank, info->update_reg, - info->update_mask, update_val); + info->desc.name, bank, reg, + mask, val); } - info->update_val = update_val; + if (info->shared_mode) + mutex_unlock(&shared_mode_mutex); - return 0; + return ret; } static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev) { struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); int ret; + u8 val; + u8 val_normal; + u8 val_idle; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } - if (info->update_val == info->update_val_normal) + /* Need special handling for shared mode */ + if (info->shared_mode) { + if (info->shared_mode->lp_mode_req) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; + } + + if (info->mode_mask) { + /* Dedicated register for handling mode */ + ret = abx500_get_register_interruptible(info->dev, + info->mode_bank, info->mode_reg, &val); + val = val & info->mode_mask; + + val_normal = info->mode_val_normal; + val_idle = info->mode_val_idle; + } else { + /* Mode register same as enable register */ + val = info->update_val; + val_normal = info->update_val_normal; + val_idle = info->update_val_idle; + } + + if (val == val_normal) ret = REGULATOR_MODE_NORMAL; - else if (info->update_val == info->update_val_idle) + else if (val == val_idle) ret = REGULATOR_MODE_IDLE; else ret = -EINVAL; @@ -585,6 +685,15 @@ static struct regulator_ops ab8500_regulator_ops = { .list_voltage = regulator_list_voltage_linear, }; +static struct regulator_ops ab8500_regulator_anamic_mode_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .set_mode = ab8500_regulator_set_mode, + .get_mode = ab8500_regulator_get_mode, + .list_voltage = regulator_list_voltage_table, +}; + /* AB8500 regulator information */ static struct ab8500_regulator_info ab8500_regulator_info[AB8500_NUM_REGULATORS] = { @@ -1024,32 +1133,44 @@ static struct ab8500_regulator_info [AB8505_LDO_ANAMIC1] = { .desc = { .name = "LDO-ANAMIC1", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_anamic_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8505_LDO_ANAMIC1, .owner = THIS_MODULE, .n_voltages = 1, .volt_table = fixed_2050000_voltage, }, + .shared_mode = &ldo_anamic1_shared, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x08, .update_val = 0x08, + .mode_bank = 0x01, + .mode_reg = 0x54, + .mode_mask = 0x04, + .mode_val_idle = 0x04, + .mode_val_normal = 0x00, }, [AB8505_LDO_ANAMIC2] = { .desc = { .name = "LDO-ANAMIC2", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_anamic_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8505_LDO_ANAMIC2, .owner = THIS_MODULE, .n_voltages = 1, .volt_table = fixed_2050000_voltage, }, + .shared_mode = &ldo_anamic2_shared, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x10, .update_val = 0x10, + .mode_bank = 0x01, + .mode_reg = 0x54, + .mode_mask = 0x04, + .mode_val_idle = 0x04, + .mode_val_normal = 0x00, }, [AB8505_LDO_AUX8] = { .desc = { @@ -1589,6 +1710,14 @@ static struct ab8500_regulator_info }, }; +static struct ab8500_shared_mode ldo_anamic1_shared = { + .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2], +}; + +static struct ab8500_shared_mode ldo_anamic2_shared = { + .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1], +}; + struct ab8500_reg_init { u8 bank; u8 addr; -- cgit From c4e67bbc99ce661808c3ee77b0bb5779d0df11ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 2 Apr 2013 13:24:19 +0100 Subject: ARM: ux500: Pass regulator platform data using the new format Regulator platform data is now passed though a single structure as opposed to the old way where four separate struct elements were required. This patch makes use of the new format. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500.c | 5 +---- include/linux/mfd/abx500/ab8500.h | 11 ++--------- 2 files changed, 3 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b03457881c4b..b1124bd34a6c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -198,10 +198,7 @@ static struct platform_device snowball_sbnet_dev = { struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator_reg_init = ab8500_regulator_reg_init, - .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), + .regulator = &ab8500_regulator_plat_data, .gpio = &ab8500_gpio_pdata, .codec = &ab8500_codec_pdata, }; diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 9db0bda446a0..84f449475c25 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -364,8 +364,7 @@ struct ab8500 { const int *irq_reg_offset; }; -struct regulator_reg_init; -struct regulator_init_data; +struct ab8500_regulator_platform_data; struct ab8500_gpio_platform_data; struct ab8500_codec_platform_data; struct ab8500_sysctrl_platform_data; @@ -375,19 +374,13 @@ struct ab8500_sysctrl_platform_data; * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 - * @num_regulator_reg_init: number of regulator init registers - * @regulator_reg_init: regulator init registers - * @num_regulator: number of regulators * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; bool pm_power_off; void (*init) (struct ab8500 *); - int num_regulator_reg_init; - struct ab8500_regulator_reg_init *regulator_reg_init; - int num_regulator; - struct regulator_init_data *regulator; + struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; struct ab8500_codec_platform_data *codec; struct ab8500_sysctrl_platform_data *sysctrl; -- cgit From a652f3d24cd27e2d6aefb38b6bcf7151ed4c04e3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 2 Apr 2013 13:24:21 +0100 Subject: ARM: ux500: Regulators: Bring the AB8500 regulator platform data up-to-date Quite a few changes in this patch, including: supply-name changes, new consumers, initialisation and capability updates and new regulators. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-regulators.c | 75 +++++++++++++++++---------- 1 file changed, 47 insertions(+), 28 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 832966311c29..ff3c9f016591 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -66,7 +66,7 @@ static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* BH1780GLS ambient light sensor */ REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "3-0018"), + REGULATOR_SUPPLY("vdd", "2-0018"), /* lsm303dlhc accelerometer */ REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ @@ -93,9 +93,16 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi4"), /* AB8500 audio codec */ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), }; static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), /* External MMC slot power */ REGULATOR_SUPPLY("vmmc", "sdi0"), }; @@ -126,6 +133,10 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), /* Internal general-purpose ADC */ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), }; static struct regulator_consumer_supply ab8500_vaud_consumers[] = { @@ -153,6 +164,8 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", NULL), /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), }; static struct regulator_consumer_supply ab8505_usb_consumers[] = { @@ -161,8 +174,15 @@ static struct regulator_consumer_supply ab8505_usb_consumers[] = { }; static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* External displays, connector on board, 1v8 power supply */ - REGULATOR_SUPPLY("vsmps2", "mcde.0"), + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), }; /* ab8500 regulator register initialization */ @@ -304,9 +324,9 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { */ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* - * Vaux1Sel = 2.5 V + * Vaux1Sel = 2.8 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), /* * Vaux2Sel = 2.9 V */ @@ -342,18 +362,11 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_AUX1] = { .constraints = { .name = "V-DISPLAY", - .min_uV = 2500000, - .max_uV = 2900000, + .min_uV = 2800000, + .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, .boot_on = 1, /* display is on at boot */ - /* - * This voltage cannot be disabled right now because - * it is somehow affecting the external MMC - * functionality, though that typically will use - * AUX3. - */ - .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, @@ -365,7 +378,10 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), .consumer_supplies = ab8500_vaux2_consumers, @@ -377,7 +393,10 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), .consumer_supplies = ab8500_vaux3_consumers, @@ -431,15 +450,23 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_INTCORE] = { .constraints = { .name = "V-INTCORE", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), .consumer_supplies = ab8500_vintcore_consumers, }, - /* supply for U8500 CSI/DSI, VANA LDO */ + /* supply for U8500 CSI-DSI, VANA LDO */ [AB8500_LDO_ANA] = { .constraints = { - .name = "V-CSI/DSI", + .name = "V-CSI-DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), @@ -999,16 +1026,8 @@ void mop500_regulator_init(void) struct regulator_init_data *regulator; /* - * Handle VextSupply1 on older boards than HREFP_V22_V1x - * (turn off in suspend) + * Temporarily turn on Vaux2 on 8520 machine */ - if (cpu_is_u8500v20() || cpu_is_u8500v21()) { - /* disable VextSupply1 in suspend */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY1]; - regulator->constraints.state_mem.disabled = 1; - regulator->constraints.state_standby.disabled = 1; - } - if (cpu_is_u8520()) { /* Vaux2 initialized to be on */ ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); -- cgit From 3ec6eb9cc2dbfa5b626f813ab8077eb71da60af2 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 4 Apr 2013 18:17:19 +0200 Subject: regulator: max8952: Separate constraints from platform data struct This patch modifies platform data structure of max8952 driver to use pointer to regulator_init_data struct instead of embedding it. This is a prerequisite for adding Device Tree support for the driver. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown --- arch/arm/mach-exynos/mach-universal_c210.c | 27 ++++++++++++++------------- drivers/regulator/max8952.c | 4 ++-- include/linux/regulator/max8952.h | 2 +- 3 files changed, 17 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 497fcb793dc1..d28c7fbaba2d 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -97,6 +97,19 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { static struct regulator_consumer_supply max8952_consumer = REGULATOR_SUPPLY("vdd_arm", NULL); +static struct regulator_init_data universal_max8952_reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, +}; + static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), .gpio_vid1 = EXYNOS4_GPX0(4), @@ -105,19 +118,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ .sync_freq = 0, /* default: fastest */ .ramp_speed = 0, /* default: fastest */ - - .reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, - }, + .reg_data = &universal_max8952_reg_data, }; static struct regulator_consumer_supply lp3974_buck1_consumer = diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index fc7935a19e3a..100b9177dba1 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -154,11 +154,11 @@ static int max8952_pmic_probe(struct i2c_client *client, max8952->pdata = pdata; config.dev = max8952->dev; - config.init_data = &pdata->reg_data; + config.init_data = pdata->reg_data; config.driver_data = max8952; config.ena_gpio = pdata->gpio_en; - if (pdata->reg_data.constraints.boot_on) + if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; max8952->rdev = regulator_register(®ulator, &config); diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h index 45e42855ad05..c13aa34d9019 100644 --- a/include/linux/regulator/max8952.h +++ b/include/linux/regulator/max8952.h @@ -128,7 +128,7 @@ struct max8952_platform_data { u8 sync_freq; u8 ramp_speed; - struct regulator_init_data reg_data; + struct regulator_init_data *reg_data; }; -- cgit