From dcdf407b9ddceb1383da14c9a095e0b07a85b014 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 18 Mar 2013 15:50:25 +0200
Subject: ARM: OMAP2+: add omapdss_init_of()

The OMAP display architecture requires a bunch of platform devices which
are not created via .dts (for now). We also need to pass a few function
pointers and the DSS hardware version from the arch code to omapdss
driver.

This patch adds omapdss_init_of() function, called from board-generic at
init time, which handles those tasks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/display.c | 105 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 4cf165502b35..a83ada38cae2 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -552,3 +554,106 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	return r;
 }
+
+struct device_node * __init omapdss_find_dss_of_node(void)
+{
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss");
+	if (node)
+		return node;
+
+	return NULL;
+}
+
+int __init omapdss_init_of(void)
+{
+	int r;
+	enum omapdss_version ver;
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	static struct omap_dss_board_info board_data = {
+		.dsi_enable_pads = omap_dsi_enable_pads,
+		.dsi_disable_pads = omap_dsi_disable_pads,
+		.get_context_loss_count = omap_pm_get_dev_context_loss_count,
+		.set_min_bus_tput = omap_dss_set_min_bus_tput,
+	};
+
+	/* only create dss helper devices if dss is enabled in the .dts */
+
+	node = omapdss_find_dss_of_node();
+	if (!node)
+		return 0;
+
+	if (!of_device_is_available(node))
+		return 0;
+
+	ver = omap_display_get_version();
+
+	if (ver == OMAPDSS_VER_UNKNOWN) {
+		pr_err("DSS not supported on this SoC\n");
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+
+	if (!pdev) {
+		pr_err("Unable to find DSS platform device\n");
+		return -ENODEV;
+	}
+
+	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (r) {
+		pr_err("Unable to populate DSS submodule devices\n");
+		return r;
+	}
+
+	board_data.version = ver;
+
+	omap_display_device.dev.platform_data = &board_data;
+
+	r = platform_device_register(&omap_display_device);
+	if (r < 0) {
+		pr_err("Unable to register omapdss device\n");
+		return r;
+	}
+
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
+	return 0;
+}
-- 
cgit 


From 6a0e6b3872f09550bf8e0587d375940092580360 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 19 Dec 2013 12:34:19 +0200
Subject: ARM: OMAP2+: DT 'compatible' tweak for displays

As there is no common panel framework in the kernel, we have OMAP
specific panel drivers. However, the DT data should be generic. This
brings the issue that some other platform could use the same panels, and
would need to create a driver with the same 'compatible' string as the
OMAP driver.

In the long run, we have to get a common panel framework. For the time
being, this patch solves the issue:

At early boot time, we go through the DT nodes looking for the panels
the kernel supports for OMAP. For each found node, the 'compatible'
string is prepended with "omapdss,", i.e. "sony,acx565akm" becomes
"omapdss,sony,acx565akm". The OMAP display drivers all have "omapdss,"
at the beginning of their compatible field.

This allows us to have generic DT data, but OMAP specific display
drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-generic.c |  2 ++
 arch/arm/mach-omap2/common.h        |  1 +
 arch/arm/mach-omap2/display.c       | 62 +++++++++++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+)

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fcb7f5c271c9..0db371a88e5e 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -35,6 +35,8 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 
 static void __init omap_generic_init(void)
 {
+	omapdss_early_init_of();
+
 	pdata_quirks_init(omap_dt_match_table);
 
 	omapdss_init_of();
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1864282dbddf..d88aff7baff8 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -316,6 +316,7 @@ extern int omap_dss_reset(struct omap_hwmod *);
 int omap_clk_init(void);
 
 int __init omapdss_init_of(void);
+void __init omapdss_early_init_of(void);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a83ada38cae2..cf0cb35fa972 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -555,6 +556,67 @@ int omap_dss_reset(struct omap_hwmod *oh)
 	return r;
 }
 
+/* list of 'compatible' nodes to convert to omapdss specific */
+static const char * const dss_compat_conv_list[] __initconst = {
+	"composite-connector",
+	"dvi-connector",
+	"hdmi-connector",
+	"panel-dpi",
+	"panel-dsi-cm",
+	"sony,acx565akm",
+	"svideo-connector",
+	"ti,tfp410",
+	"ti,tpd12s015",
+};
+
+/* prepend compatible string with "omapdss," */
+static __init void omapdss_omapify_node(struct device_node *node,
+	const char *compat)
+{
+	char *new_compat;
+	struct property *prop;
+
+	new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat);
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+
+	if (!prop) {
+		pr_err("omapdss_omapify_node: kzalloc failed\n");
+		return;
+	}
+
+	prop->name = "compatible";
+	prop->value = new_compat;
+	prop->length = strlen(new_compat) + 1;
+
+	of_update_property(node, prop);
+}
+
+/*
+ * As omapdss panel drivers are omapdss specific, but we want to define the
+ * DT-data in generic manner, we convert the compatible strings of the panel
+ * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both
+ * correct DT data and omapdss specific drivers.
+ *
+ * When we get generic panel drivers to the kernel, this will be removed.
+ */
+void __init omapdss_early_init_of(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) {
+		const char *compat = dss_compat_conv_list[i];
+		struct device_node *node = NULL;
+
+		while ((node = of_find_compatible_node(node, NULL, compat))) {
+			if (!of_device_is_available(node))
+				continue;
+
+			omapdss_omapify_node(node, compat);
+		}
+	}
+}
+
 struct device_node * __init omapdss_find_dss_of_node(void)
 {
 	struct device_node *node;
-- 
cgit