From e3b382c1075e967cf1a95db881f575eef3a8f007 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Wed, 21 Nov 2018 22:05:15 +0100 Subject: ARM: dts: am335x-chiliboard: Add stdout-path property Add stdout-path property in /chosen node so that earlycon can be used by just adding earlycon in bootargs. Signed-off-by: Marcin Niestroj Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-chiliboard.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 9c2a947aacf5..b50d5d2e71ff 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -14,6 +14,10 @@ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; -- cgit From c6e967ad5a04d307836c927ae6300f62e7603dd7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 13 Dec 2018 15:02:45 -0800 Subject: ARM: dts: Add wlcore wakeirq for omap3-evm With wlcore supporting optional wakeirqs, let's configure it for omap3-evm and update the related pin muxing as some pins are left unmuxed. Let's configure a wakeirq both for the wlcore GPIO and the SDIO dat1 pin in case wlcore starts supporting SDIO dat1 interrupt at some point. Note that for off-mode, the wlcore reset GPIO will have a glitch meaning wlcore will reset. The only way to workaround for this currently is to configure the reset pin with SAFE_MODE + PULL. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-common.dtsi | 7 +++++-- arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 10 +++++++++- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 4c1227d1e79b..17c89df6ce6b 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -122,6 +122,7 @@ }; &mmc2 { + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; vmmc-supply = <&wl12xx_vmmc>; non-removable; bus-width = <4>; @@ -132,8 +133,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ + /* gpio_149 with uart1_rts pad as wakeirq */ + interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, + <&omap3_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi index ce7f42f9448c..b4109f48ec18 100644 --- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ >; }; @@ -127,9 +131,13 @@ >; }; + /* + * Note that gpio_150 pulled high with internal pull to prevent wlcore + * reset on return from off mode in idle. + */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; -- cgit From 2f60f258e0f533013042f624fb8af4fca165b646 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 13 Dec 2018 15:03:04 -0800 Subject: ARM: dts: Configure wlcore wakeirq for pandaboard With wlcore supporting optional wakeirqs, we can configure it for pandaboard. This makes ssh connection usable with the SoC entering deeper idle states. Note that pandaboard already has a wakeirq configured for SDIO dat1 pin although that is not currently used by wlcore. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 27895c1604b9..926f018823a4 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -485,8 +485,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + /* gpio_53 with gpmc_ncs3 pad as wakeup */ + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x3a>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; -- cgit From 7c695e87bd7a88298d2c00b5e14cf71d0a2a8663 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 13 Dec 2018 15:03:21 -0800 Subject: ARM: dts: omap4-droid4: Configure wlcore wakeirq With wlcore supporting optional wakeirqs, we can configure it for droid 4. This makes ssh connection usable with the SoC entering deeper idle states. Let's configure a wakeirq both for the wlcore GPIO and the SDIO dat1 pin in case wlcore starts supporting SDIO dat1 interrupt at some point. And let's also add the missing keep-power-in-suspend while at it. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 04758a2a87f0..838aa3445fbe 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -359,20 +359,24 @@ &mmc3 { vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xde>; - + interrupt-names = "irq", "wakeup"; non-removable; bus-width = <4>; cap-power-off-card; + keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; -- cgit