From b48aa991758999d4e8f9296c5bbe388f293ef465 Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin Date: Wed, 3 Jul 2024 18:45:06 +0300 Subject: staging: iio: frequency: ad9834: Validate frequency parameter value In ad9834_write_frequency() clk_get_rate() can return 0. In such case ad9834_calc_freqreg() call will lead to division by zero. Checking 'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0. ad9834_write_frequency() is called from ad9834_write(), where fout is taken from text buffer, which can contain any value. Modify parameters checking. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 12b9d5bf76bf ("Staging: IIO: DDS: AD9833 / AD9834 driver") Suggested-by: Dan Carpenter Signed-off-by: Aleksandr Mishin Reviewed-by: Dan Carpenter Link: https://patch.msgid.link/20240703154506.25584-1-amishin@t-argos.ru Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/frequency/ad9834.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index a7a5cdcc6590..47e7d7e6d920 100644 --- a/drivers/staging/iio/frequency/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -114,7 +114,7 @@ static int ad9834_write_frequency(struct ad9834_state *st, clk_freq = clk_get_rate(st->mclk); - if (fout > (clk_freq / 2)) + if (!clk_freq || fout > (clk_freq / 2)) return -EINVAL; regval = ad9834_calc_freqreg(clk_freq, fout); -- cgit From 90826e08468ba7fb35d8b39645b22d9e80004afe Mon Sep 17 00:00:00 2001 From: Guillaume Stols Date: Tue, 2 Jul 2024 12:52:51 +0000 Subject: iio: adc: ad7606: remove frstdata check for serial mode The current implementation attempts to recover from an eventual glitch in the clock by checking frstdata state after reading the first channel's sample: If frstdata is low, it will reset the chip and return -EIO. This will only work in parallel mode, where frstdata pin is set low after the 2nd sample read starts. For the serial mode, according to the datasheet, "The FRSTDATA output returns to a logic low following the 16th SCLK falling edge.", thus after the Xth pulse, X being the number of bits in a sample, the check will always be true, and the driver will not work at all in serial mode if frstdata(optional) is defined in the devicetree as it will reset the chip, and return -EIO every time read_sample is called. Hence, this check must be removed for serial mode. Fixes: b9618c0cacd7 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4") Signed-off-by: Guillaume Stols Reviewed-by: Nuno Sa Link: https://patch.msgid.link/20240702-cleanup-ad7606-v3-1-18d5ea18770e@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7606.c | 28 ++------------------------ drivers/iio/adc/ad7606.h | 2 ++ drivers/iio/adc/ad7606_par.c | 48 +++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 49 insertions(+), 29 deletions(-) diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index 3a417595294f..c321c6ef48df 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -49,7 +49,7 @@ static const unsigned int ad7616_oversampling_avail[8] = { 1, 2, 4, 8, 16, 32, 64, 128, }; -static int ad7606_reset(struct ad7606_state *st) +int ad7606_reset(struct ad7606_state *st) { if (st->gpio_reset) { gpiod_set_value(st->gpio_reset, 1); @@ -60,6 +60,7 @@ static int ad7606_reset(struct ad7606_state *st) return -ENODEV; } +EXPORT_SYMBOL_NS_GPL(ad7606_reset, IIO_AD7606); static int ad7606_reg_access(struct iio_dev *indio_dev, unsigned int reg, @@ -88,31 +89,6 @@ static int ad7606_read_samples(struct ad7606_state *st) { unsigned int num = st->chip_info->num_channels - 1; u16 *data = st->data; - int ret; - - /* - * The frstdata signal is set to high while and after reading the sample - * of the first channel and low for all other channels. This can be used - * to check that the incoming data is correctly aligned. During normal - * operation the data should never become unaligned, but some glitch or - * electrostatic discharge might cause an extra read or clock cycle. - * Monitoring the frstdata signal allows to recover from such failure - * situations. - */ - - if (st->gpio_frstdata) { - ret = st->bops->read_block(st->dev, 1, data); - if (ret) - return ret; - - if (!gpiod_get_value(st->gpio_frstdata)) { - ad7606_reset(st); - return -EIO; - } - - data++; - num--; - } return st->bops->read_block(st->dev, num, data); } diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h index 0c6a88cc4695..6649e84d25de 100644 --- a/drivers/iio/adc/ad7606.h +++ b/drivers/iio/adc/ad7606.h @@ -151,6 +151,8 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, const char *name, unsigned int id, const struct ad7606_bus_ops *bops); +int ad7606_reset(struct ad7606_state *st); + enum ad7606_supported_device_ids { ID_AD7605_4, ID_AD7606_8, diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c index d8408052262e..6bc587b20f05 100644 --- a/drivers/iio/adc/ad7606_par.c +++ b/drivers/iio/adc/ad7606_par.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -21,8 +22,29 @@ static int ad7606_par16_read_block(struct device *dev, struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - insw((unsigned long)st->base_address, buf, count); + /* + * On the parallel interface, the frstdata signal is set to high while + * and after reading the sample of the first channel and low for all + * other channels. This can be used to check that the incoming data is + * correctly aligned. During normal operation the data should never + * become unaligned, but some glitch or electrostatic discharge might + * cause an extra read or clock cycle. Monitoring the frstdata signal + * allows to recover from such failure situations. + */ + int num = count; + u16 *_buf = buf; + + if (st->gpio_frstdata) { + insw((unsigned long)st->base_address, _buf, 1); + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + _buf++; + num--; + } + insw((unsigned long)st->base_address, _buf, num); return 0; } @@ -35,8 +57,28 @@ static int ad7606_par8_read_block(struct device *dev, { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - - insb((unsigned long)st->base_address, buf, count * 2); + /* + * On the parallel interface, the frstdata signal is set to high while + * and after reading the sample of the first channel and low for all + * other channels. This can be used to check that the incoming data is + * correctly aligned. During normal operation the data should never + * become unaligned, but some glitch or electrostatic discharge might + * cause an extra read or clock cycle. Monitoring the frstdata signal + * allows to recover from such failure situations. + */ + int num = count; + u16 *_buf = buf; + + if (st->gpio_frstdata) { + insb((unsigned long)st->base_address, _buf, 2); + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + _buf++; + num--; + } + insb((unsigned long)st->base_address, _buf, num * 2); return 0; } -- cgit From 84c65d8008764a8fb4e627ff02de01ec4245f2c4 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 23 Jul 2024 11:32:21 -0500 Subject: iio: buffer-dmaengine: fix releasing dma channel on error If dma_get_slave_caps() fails, we need to release the dma channel before returning an error to avoid leaking the channel. Fixes: 2d6ca60f3284 ("iio: Add a DMAengine framework based buffer") Signed-off-by: David Lechner Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index 12aa1412dfa0..426cc614587a 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -237,7 +237,7 @@ static struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, ret = dma_get_slave_caps(chan, &caps); if (ret < 0) - goto err_free; + goto err_release; /* Needs to be aligned to the maximum of the minimums */ if (caps.src_addr_widths) @@ -263,6 +263,8 @@ static struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, return &dmaengine_buffer->queue.buffer; +err_release: + dma_release_channel(chan); err_free: kfree(dmaengine_buffer); return ERR_PTR(ret); -- cgit From 70eac5c3c49195a323387ec237f17f9801cbdb25 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 23 Jul 2024 14:13:22 +0300 Subject: iio: adc: ad7173: Fix incorrect compatible string Wrong compatible strings are used for AD411x devices. Fix by adding the missing "adi," prefix. Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices") Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://patch.msgid.link/20240723111322.324947-1-dumitru.ceclan@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 9544bf7142ad..a854f2d30174 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -1435,11 +1435,11 @@ static int ad7173_probe(struct spi_device *spi) } static const struct of_device_id ad7173_of_match[] = { - { .compatible = "ad4111", .data = &ad4111_device_info }, - { .compatible = "ad4112", .data = &ad4112_device_info }, - { .compatible = "ad4114", .data = &ad4114_device_info }, - { .compatible = "ad4115", .data = &ad4115_device_info }, - { .compatible = "ad4116", .data = &ad4116_device_info }, + { .compatible = "adi,ad4111", .data = &ad4111_device_info }, + { .compatible = "adi,ad4112", .data = &ad4112_device_info }, + { .compatible = "adi,ad4114", .data = &ad4114_device_info }, + { .compatible = "adi,ad4115", .data = &ad4115_device_info }, + { .compatible = "adi,ad4116", .data = &ad4116_device_info }, { .compatible = "adi,ad7172-2", .data = &ad7172_2_device_info }, { .compatible = "adi,ad7172-4", .data = &ad7172_4_device_info }, { .compatible = "adi,ad7173-8", .data = &ad7173_8_device_info }, -- cgit From 96f9ab0d5933c1c00142dd052f259fce0bc3ced2 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Wed, 31 Jul 2024 15:37:22 +0300 Subject: iio: adc: ad7124: fix chip ID mismatch The ad7124_soft_reset() function has the assumption that the chip will assert the "power-on reset" bit in the STATUS register after a software reset without any delay. The POR bit =0 is used to check if the chip initialization is done. A chip ID mismatch probe error appears intermittently when the probe continues too soon and the ID register does not contain the expected value. Fix by adding a 200us delay after the software reset command is issued. Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7124.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index 3beed78496c5..c0b82f64c976 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -764,6 +764,7 @@ static int ad7124_soft_reset(struct ad7124_state *st) if (ret < 0) return ret; + fsleep(200); timeout = 100; do { ret = ad_sd_read_reg(&st->sd, AD7124_STATUS, 1, &readval); -- cgit From 2f6b92d0f69f04d9e2ea0db1228ab7f82f3173af Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Wed, 31 Jul 2024 15:37:23 +0300 Subject: iio: adc: ad7124: fix config comparison The ad7124_find_similar_live_cfg() computes the compare size by substracting the address of the cfg struct from the address of the live field. Because the live field is the first field in the struct, the result is 0. Also, the memcmp() call is made from the start of the cfg struct, which includes the live and cfg_slot fields, which are not relevant for the comparison. Fix by grouping the relevant fields with struct_group() and use the size of the group to compute the compare size; make the memcmp() call from the address of the group. Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7124.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index c0b82f64c976..afb5f4d741e6 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -147,15 +147,18 @@ struct ad7124_chip_info { struct ad7124_channel_config { bool live; unsigned int cfg_slot; - enum ad7124_ref_sel refsel; - bool bipolar; - bool buf_positive; - bool buf_negative; - unsigned int vref_mv; - unsigned int pga_bits; - unsigned int odr; - unsigned int odr_sel_bits; - unsigned int filter_type; + /* Following fields are used to compare equality. */ + struct_group(config_props, + enum ad7124_ref_sel refsel; + bool bipolar; + bool buf_positive; + bool buf_negative; + unsigned int vref_mv; + unsigned int pga_bits; + unsigned int odr; + unsigned int odr_sel_bits; + unsigned int filter_type; + ); }; struct ad7124_channel { @@ -334,11 +337,12 @@ static struct ad7124_channel_config *ad7124_find_similar_live_cfg(struct ad7124_ ptrdiff_t cmp_size; int i; - cmp_size = (u8 *)&cfg->live - (u8 *)cfg; + cmp_size = sizeof_field(struct ad7124_channel_config, config_props); for (i = 0; i < st->num_channels; i++) { cfg_aux = &st->channels[i].cfg; - if (cfg_aux->live && !memcmp(cfg, cfg_aux, cmp_size)) + if (cfg_aux->live && + !memcmp(&cfg->config_props, &cfg_aux->config_props, cmp_size)) return cfg_aux; } -- cgit From 8a3dcc970dc57b358c8db2702447bf0af4e0d83a Mon Sep 17 00:00:00 2001 From: Matteo Martelli Date: Tue, 30 Jul 2024 10:11:53 +0200 Subject: iio: fix scale application in iio_convert_raw_to_processed_unlocked When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO the scale passed as argument is only applied to the fractional part of the value. Fix it by also multiplying the integer part by the scale provided. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Matteo Martelli Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/inkern.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 9f484c94bc6e..151099be2863 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -647,17 +647,17 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, break; case IIO_VAL_INT_PLUS_MICRO: if (scale_val2 < 0) - *processed = -raw64 * scale_val; + *processed = -raw64 * scale_val * scale; else - *processed = raw64 * scale_val; + *processed = raw64 * scale_val * scale; *processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL); break; case IIO_VAL_INT_PLUS_NANO: if (scale_val2 < 0) - *processed = -raw64 * scale_val; + *processed = -raw64 * scale_val * scale; else - *processed = raw64 * scale_val; + *processed = raw64 * scale_val * scale; *processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000000LL); break; -- cgit From de80af5c2ffd9c3f02792f6979296cb6f74e82e5 Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Wed, 31 Jul 2024 16:06:57 +0200 Subject: iio: adc: ads1119: Fix IRQ flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove IRQF_TRIGGER_FALLING flag from irq request, this should come from the platform firmware and should not be hard-coded into the driver. Add IRQF_ONESHOT flag to the irq request, the interrupt should not be re-activated in interrupt context, it should be done only after the device irq handler run. Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver") Signed-off-by: Francesco Dolcini Reviwed-by: João Paulo Gonçalves Link: https://patch.msgid.link/20240731140657.88265-1-francesco@dolcini.it Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1119.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti-ads1119.c b/drivers/iio/adc/ti-ads1119.c index 630f5d5f9a60..d649980479e4 100644 --- a/drivers/iio/adc/ti-ads1119.c +++ b/drivers/iio/adc/ti-ads1119.c @@ -735,7 +735,7 @@ static int ads1119_probe(struct i2c_client *client) if (client->irq > 0) { ret = devm_request_threaded_irq(dev, client->irq, ads1119_irq_handler, - NULL, IRQF_TRIGGER_FALLING, + NULL, IRQF_ONESHOT, "ads1119", indio_dev); if (ret) return dev_err_probe(dev, ret, -- cgit From e81bb580ec08d7503c14c92157d810d306290003 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Tue, 6 Aug 2024 17:40:49 +0200 Subject: iio: adc: ad_sigma_delta: fix irq_flags on irq request With commit 7b0c9f8fa3d2 ("iio: adc: ad_sigma_delta: Add optional irq selection"), we can get the irq line from struct ad_sigma_delta_info instead of the spi device. However, in devm_ad_sd_probe_trigger(), when getting the irq_flags with irq_get_trigger_type() we are still using the spi device irq instead of the one used for devm_request_irq(). Fixes: 7b0c9f8fa3d2 ("iio: adc: ad_sigma_delta: Add optional irq selection") Signed-off-by: Nuno Sa Link: https://patch.msgid.link/20240806-dev-fix-ad-sigma-delta-v1-1-aa25b173c063@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad_sigma_delta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index 8c062b0d26e3..dcd557e93586 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -569,7 +569,7 @@ EXPORT_SYMBOL_NS_GPL(ad_sd_validate_trigger, IIO_AD_SIGMA_DELTA); static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_dev) { struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev); - unsigned long irq_flags = irq_get_trigger_type(sigma_delta->spi->irq); + unsigned long irq_flags = irq_get_trigger_type(sigma_delta->irq_line); int ret; if (dev != &sigma_delta->spi->dev) { -- cgit From 61cbfb5368dd50ed0d65ce21d305aa923581db2b Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 6 Aug 2024 11:51:33 +0300 Subject: iio: adc: ad7124: fix DT configuration parsing The cfg pointer is set before reading the channel number that the configuration should point to. This causes configurations to be shifted by one channel. For example setting bipolar to the first channel defined in the DT will cause bipolar mode to be active on the second defined channel. Fix by moving the cfg pointer setting after reading the channel number. Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7124.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index afb5f4d741e6..108e9ccab1ef 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -844,8 +844,6 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev, st->channels = channels; device_for_each_child_node_scoped(dev, child) { - cfg = &st->channels[channel].cfg; - ret = fwnode_property_read_u32(child, "reg", &channel); if (ret) return ret; @@ -863,6 +861,7 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev, st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) | AD7124_CHANNEL_AINM(ain[1]); + cfg = &st->channels[channel].cfg; cfg->bipolar = fwnode_property_read_bool(child, "bipolar"); ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp); -- cgit From f242967f4d1c024ac42bb47ea50b6360b4cb4556 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Fri, 9 Aug 2024 16:49:08 +0300 Subject: iio: adc: ad7173: fix GPIO device info Models AD4114/5/6 have .higher_gpio_bits = true. This is not correct as the only models that have the GPIO bits to a higher position are AD4111/2. Fix by removing the higher_gpio_bits = true from the AD4114/5/6 models. Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices") Signed-off-by: Dumitru Ceclan Link: https://patch.msgid.link/20240809134909.26829-1-dumitru.ceclan@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index a854f2d30174..0702ec71aa29 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -302,7 +302,6 @@ static const struct ad7173_device_info ad4114_device_info = { .num_configs = 8, .num_voltage_in = 16, .num_gpios = 4, - .higher_gpio_bits = true, .has_vincom_input = true, .has_temp = true, .has_input_buf = true, @@ -320,7 +319,6 @@ static const struct ad7173_device_info ad4115_device_info = { .num_configs = 8, .num_voltage_in = 16, .num_gpios = 4, - .higher_gpio_bits = true, .has_vincom_input = true, .has_temp = true, .has_input_buf = true, @@ -338,7 +336,6 @@ static const struct ad7173_device_info ad4116_device_info = { .num_configs = 8, .num_voltage_in = 16, .num_gpios = 4, - .higher_gpio_bits = true, .has_vincom_input = true, .has_temp = true, .has_input_buf = true, -- cgit From 0a3b517c8089aa4cf339f41460d542c681409386 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Wed, 14 Aug 2024 14:37:35 +0000 Subject: iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips Interrupt status read seems to be broken on some old MPU-6050 like chips. Fix by reverting to previous driver behavior bypassing interrupt status read. This is working because these chips are not supporting WoM and data ready is the only interrupt source. Fixes: 5537f653d9be ("iio: imu: inv_mpu6050: add new interrupt handler for WoM events") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Tested-by: Svyatoslav Ryhel # LG P895 Tested-by: Andreas Westman Dorcsak # LG P880 Link: https://patch.msgid.link/20240814143735.327302-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 84273660ca2e..3bfeabab0ec4 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -248,12 +248,20 @@ static irqreturn_t inv_mpu6050_interrupt_handle(int irq, void *p) int result; switch (st->chip_type) { + case INV_MPU6000: case INV_MPU6050: + case INV_MPU9150: + /* + * WoM is not supported and interrupt status read seems to be broken for + * some chips. Since data ready is the only interrupt, bypass interrupt + * status read and always assert data ready bit. + */ + wom_bits = 0; + int_status = INV_MPU6050_BIT_RAW_DATA_RDY_INT; + goto data_ready_interrupt; case INV_MPU6500: case INV_MPU6515: case INV_MPU6880: - case INV_MPU6000: - case INV_MPU9150: case INV_MPU9250: case INV_MPU9255: wom_bits = INV_MPU6500_BIT_WOM_INT; @@ -279,6 +287,7 @@ static irqreturn_t inv_mpu6050_interrupt_handle(int irq, void *p) } } +data_ready_interrupt: /* handle raw data interrupt */ if (int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT) { indio_dev->pollfunc->timestamp = st->it_timestamp; -- cgit